Bmed Short Intro
•Download as PPT, PDF•
0 likes•354 views
Balda Medical GmbH & Co. is a business unit of Balda Solutions established in 1908 that specializes in developing, industrializing, and producing plastic parts and sub-assembly units for the pharmaceutical, diagnostics, and medical technology industries. Balda has locations in Germany, China, Malaysia, and the USA, with over 7,000 employees worldwide. Balda offers integrated product development from concept to production of plastic parts using techniques like injection molding, decorating, and assembly. Balda prioritizes quality, certifications, cost-effectiveness, and risk management in its medical device production. Examples of Balda's products include handheld devices, disposables, packaging and dosing, and functional sub-assembly units
Report
Share
Report
Share
![Balda Medical GmbH & Co. ,[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
S co pe-1.0
Here is an intuitive approach to design Electronic Packaging of System. This approach is derived out extensive experience in design electronic products across different domains.
Additive Manufacturing - Mechanical Test Methods - OMTEC 2018
Medical devices fabricated from additively-manufactured materials must undergo a variety of mechanical tests before receiving regulatory approval. Due to the complexity of manufacturing processes and the limited clinical knowledge of AM devices, they are subject to additional scrutiny by manufacturers and Notified Bodies. Several test methods for characterizing these devices are presented in this session, as well as the differences between testing additively-manufactured devices and those fabricated with traditional machining methods.
The needs of the thermoset supply chain
The document discusses trends in the thermoset supply chain including:
- Molder/material supplier partnerships that enable specialization and material agnosticism.
- Increasing outsourcing of tooling to China requiring molders' involvement.
- Molders playing an important logistical role as hubs that maximize efficiencies.
- A material supplier discussing rising costs and identifying areas where thermosets offer value.
- Advancements in precision technology like process monitoring, tool design standards, and using data to improve controls.
Project Managers Workshop
The document provides an agenda and overview for a project management workshop. The workshop will cover three main topics: an introduction to the project management profession, Microsoft Project training, and the key project management process groups. It will be led by Muhammad Azeem Uddin and aims to provide hands-on learning for line managers, team leaders, functional coordinators and project organizers. Ground rules for the workshop are outlined which emphasize avoiding distractions to allow full concentration.
Cindy Novak Quality Expo 092209 Presentation
The document discusses Lean Six Sigma and ISO 9001:2008 quality standards and how they can be used together. It defines the eight types of waste (WORMPIIT) according to Lean principles and how eliminating these wastes through Lean Six Sigma can benefit sustainability efforts and customer satisfaction. Lean Six Sigma and ISO 9001:2008 complement each other by providing methods to achieve quality objectives through prevention of defects, statistical process control, and continuous improvement.
Balda Solutions Capabilities 3 10
The document provides an overview of Balda's capabilities across various technologies including tooling, molding, surface decoration, assembly processes, and product development. Key capabilities mentioned include in-mold decoration, various resin and molding technologies, digital printing, laser etching, metallization, and turnkey product development. Balda has experience developing products for companies such as Sony Ericsson, Nokia, and Sagem.
Application of Lean Methodology to Improve Chemotherapy Delivery in a COPS Ce...
Application of Lean Methodology to Improve Chemotherapy Delivery in a COPS Ce...Saskatchewan Health Care Quality Summit
Improvement Story session at the 2013 Saskatchewan Health Care Quality Summit. For more information about the summit, visit www.qualitysummit.ca. Follow @QualitySummit on Twitter.
In response to a significantly increasing volume of oncology treatments directed to our centre, we undertook a Lean initiative aimed at streamlining our process and eliminating waste. Significant improvements included virtual elimination of patient wait time for treatments by admixing chemotherapy the afternoon prior to treatment and a mean order processing time decrease from 60 to 30 minutes per regimen by creating electronic standardized chemotherapy order sets.
Better Care
Shannan Neubauer, Katherine Diduck, Kendra Soyka, Sunrise Health Region
Company presentation file of woojin plaimm
Woojin Plaimm company presentation.
Woojin Plaimm is a Big company who make the Injection Machine in Korea. We are the number one in Korea. The company founded in 1985. Our Factory locate in Boeun Korea and Ningbo China. We focus on Injection Molding Machine only. We produce the machine for
Serve the customer in variously industrial, such as Auto part, Electric part, Other part in House hold.
Recommended
S co pe-1.0
Here is an intuitive approach to design Electronic Packaging of System. This approach is derived out extensive experience in design electronic products across different domains.
Additive Manufacturing - Mechanical Test Methods - OMTEC 2018
Medical devices fabricated from additively-manufactured materials must undergo a variety of mechanical tests before receiving regulatory approval. Due to the complexity of manufacturing processes and the limited clinical knowledge of AM devices, they are subject to additional scrutiny by manufacturers and Notified Bodies. Several test methods for characterizing these devices are presented in this session, as well as the differences between testing additively-manufactured devices and those fabricated with traditional machining methods.
The needs of the thermoset supply chain
The document discusses trends in the thermoset supply chain including:
- Molder/material supplier partnerships that enable specialization and material agnosticism.
- Increasing outsourcing of tooling to China requiring molders' involvement.
- Molders playing an important logistical role as hubs that maximize efficiencies.
- A material supplier discussing rising costs and identifying areas where thermosets offer value.
- Advancements in precision technology like process monitoring, tool design standards, and using data to improve controls.
Project Managers Workshop
The document provides an agenda and overview for a project management workshop. The workshop will cover three main topics: an introduction to the project management profession, Microsoft Project training, and the key project management process groups. It will be led by Muhammad Azeem Uddin and aims to provide hands-on learning for line managers, team leaders, functional coordinators and project organizers. Ground rules for the workshop are outlined which emphasize avoiding distractions to allow full concentration.
Cindy Novak Quality Expo 092209 Presentation
The document discusses Lean Six Sigma and ISO 9001:2008 quality standards and how they can be used together. It defines the eight types of waste (WORMPIIT) according to Lean principles and how eliminating these wastes through Lean Six Sigma can benefit sustainability efforts and customer satisfaction. Lean Six Sigma and ISO 9001:2008 complement each other by providing methods to achieve quality objectives through prevention of defects, statistical process control, and continuous improvement.
Balda Solutions Capabilities 3 10
The document provides an overview of Balda's capabilities across various technologies including tooling, molding, surface decoration, assembly processes, and product development. Key capabilities mentioned include in-mold decoration, various resin and molding technologies, digital printing, laser etching, metallization, and turnkey product development. Balda has experience developing products for companies such as Sony Ericsson, Nokia, and Sagem.
Application of Lean Methodology to Improve Chemotherapy Delivery in a COPS Ce...
Application of Lean Methodology to Improve Chemotherapy Delivery in a COPS Ce...Saskatchewan Health Care Quality Summit
Improvement Story session at the 2013 Saskatchewan Health Care Quality Summit. For more information about the summit, visit www.qualitysummit.ca. Follow @QualitySummit on Twitter.
In response to a significantly increasing volume of oncology treatments directed to our centre, we undertook a Lean initiative aimed at streamlining our process and eliminating waste. Significant improvements included virtual elimination of patient wait time for treatments by admixing chemotherapy the afternoon prior to treatment and a mean order processing time decrease from 60 to 30 minutes per regimen by creating electronic standardized chemotherapy order sets.
Better Care
Shannan Neubauer, Katherine Diduck, Kendra Soyka, Sunrise Health Region
Company presentation file of woojin plaimm
Woojin Plaimm company presentation.
Woojin Plaimm is a Big company who make the Injection Machine in Korea. We are the number one in Korea. The company founded in 1985. Our Factory locate in Boeun Korea and Ningbo China. We focus on Injection Molding Machine only. We produce the machine for
Serve the customer in variously industrial, such as Auto part, Electric part, Other part in House hold.
Presentation Of Sapac
Shenzhen Sapac Industry Co., Ltd is a precision plastic injection molding company founded in 2003 with 350 employees. They specialize in automotive parts and have 50 injection molding machines and a tooling shop with 45 machines. They provide design, prototyping, molding, assembly, and logistics services. Their customers include automotive suppliers such as Delphi, Valeo, and Magnet.
Managing Complexity
Sam Wagner presented at the IndustryWeek '09 Best Plants Conference on managing manufacturing complexity through innovative processes at Donnelly Custom Manufacturing. Donnelly started in 1984 with 4 presses and has grown to over 225 employees with 33 presses. They focus on short run production with runs averaging 11 hours. Donnelly addresses complexity through process orientation and measurements, peer accountability, constancy of purpose through quality systems, and attention to detail using techniques like 5S. This allows them to continuously improve their leadership in short run manufacturing.
Lean Manufacturing and Lean Six Sigma
Lean Six Sigma is a methodology based on both Lean Manufacturing and Six Sigma. This presentation gives a brief overview and history of each methodology. Presentation by EMS Consulting Group, Inc. www.emsstrategies.com
MATLAB Modeling of SPT and Grain Size Data in Producing Soil Profile
The study was carried out to find out a suitable numerical procedure for establishing a graphical presentation of the soil profile of a site using SPT values and grain size analysis data. MATLAB numerical tool was used for this purpose and the soil properties was estimated using established empirical correlations. A computer Software was developed where SPT values at borehole locations, percent of grain sizes, water table and GPS coordinates of the site were used as inputs, Rectangular grids in 2-D or 3-D space were created for interpolation or extrapolation of the gridded data in ‘meshgrid’ format. The output yielded intermittent SPT profile and the contour plot matrix for subsoil soil condition of a site. The output soil-profile is presented by a 3-D shaded surface plot that would be useful for preliminary selection of a project site, land use planning, zoning ordinances, pre-disaster planning, capital investment planning,
Fifteen borehole data of SPT values and grain sizes along a 20 km stretch of ongoing Janjira approach road project of Padma multipurpose bridge in Madaripur district were used to verify the usability of the developed Software. Disturbed soil sample were collected up to depths of 19.5m depth in every 1.5m interval to perform grain size analysis test. Excel spreadsheet was used where more than 500 data including SPT-N values, percent sand and fines at depths, GPS coordinated, reduce level and ground water table. The soils at the site were predominantly alluvial deposits. All these data were used in MATLAB interactive environment for numerical computation, visualization, and programming. The purposes of the study were to find SPT contour profile and soil-profile of a particular alignment of the site and to extract borehole Log form SPT profile and soil-profile of a specific location of the alignment.
Outcome of this study can be used in microzonation studies, site response analysis, calculation of bearing capacity of subsoils in the region and producing a number of parameters which are empirically related to SPT values.
iZenBridge's PMP® Math Series: Project Selection : PV , NPV, IRR, BCR and Pay...
Video of this presentation can be found at :
http://youtu.be/yIMMy8hh0WQ
In this presentation we have introduced some of the techniques used while performing project selection, we have seen people getting questions related to PV, NPV , IRR , BCR and Payback period in their PMP exam.
Project Selection falls under Project Integration Management Knowledge Area and it get executed before Project Charter get prepared.
The difference between six sigma and lean manufacturing
The difference between six sigma and lean manufacturing
ENG: Hossam Mostafa Eid
Injection molding process & machine selection
Injection molding machines can fasten the molds in either a horizontal or vertical position. The majority of machines are horizontally oriented, but vertical machines are used in some niche applications such as insert molding, allowing the machine to take advantage of gravity. Some vertical machines also don't require the mold to be fastened. There are many ways to fasten the tools to the platens, the most common being manual clamps (both halves are bolted to the platens); however hydraulic clamps (chocks are used to hold the tool in place) and magnetic clamps are also used. The magnetic and hydraulic clamps are used where fast tool changes are required.
2008 Nov Lessons Learned Lean Six Sigma Balanced Scorecard
This document discusses lessons learned from deploying Lean Six Sigma in services organizations. It provides an overview of key differences between manufacturing and services and discusses challenges in applying Lean Six Sigma tools. The document also discusses approaches to strategic project selection using Balanced Scorecard and Theory of Constraints and outlines lessons learned around deployment criteria, roles, training, and measurement. Current trends indicate Lean Six Sigma is moving towards a more integrated approach and being applied in smaller organizations and healthcare.
assembly line balancing
This document discusses line balancing, which involves assigning tasks along an assembly line to workstations in order to achieve minimum idle time and meet production rates. It defines key terms like cycle time, station time, line efficiency, and smoothness index. It also covers precedence constraints, which restrict the order that work elements can be completed in. Finally, it outlines several common line balancing methods, including Helgeson and Birnie's Ranked Positional Weight method, Kilbridge and Wester's region approach, and the Largest Candidate Rule.
Line balancing and heuristics
This document discusses line balancing in manufacturing, which aims to evenly divide work among workstations in a production process. The goal is to determine the optimal number of workstations, tasks assigned to each, and minimum resources needed. Key terms defined include tasks, task times, cycle time, workstations, and more. Common line balancing procedures involve determining tasks, precedence, times, cycle time, and minimum workstations. Computer programs now help balance large production lines using heuristics like incremental utilization and longest task time.
Daily 15 minute office 5S
Helping you to embrace lean by doing 5S in your office or work-space. A good way for a busy executive to clean up his office, work effectively and learn 5S by experiencing it first hand
Ppt Project Math
This document provides a high-level overview of the history of mathematics, levels of mathematics taught at different grades, famous mathematicians, unsolved math problems, and resources for math games and jokes. It discusses important developments like the first evidence of counting 50,000 BC, the definition of the 360 degree circle in 180 BC, the first trigonometry in 140 BC, and the proofs of Fermat's Last Theorem in 1994 and the Four Color Theorem in the 1970s using computers.
WORK study& LINE BALANCING
This document discusses work study and line balancing for the garments industry. It begins by introducing work study, which involves systematically analyzing work to optimize efficiency. The basic tools of work study are then outlined as work measurement, method study, and time study. Line balancing is introduced as allocating machines and work to individuals according to a work sheet to optimize production. The document then provides details on various aspects of work study and line balancing, including objectives, processes, techniques, and applications to garment manufacturing and sewing. It concludes by outlining the sewing sequence and process for making a polo shirt.
Machine Guarding for Injection Molding Machines
This document provides an overview of machine guarding for injection molding machines. It identifies common injuries that can occur like amputations or burns. Causes include reaching into hazardous areas of machines or bypassing safety guards. The document outlines how to safely operate machines through proper guarding of areas like the point of operation and use of safety devices. It emphasizes adopting a total safety approach to protect workers from injury risks in injection molding processes.
Quality Control
This document discusses quality control procedures for evaluating a project. It outlines several ways to assess quality, including submitting progress reports, conducting pre-and post-tests, providing a warranty, and acknowledging limitations. Quality control focuses on controlling elements of production, ensuring competence, and addressing soft elements like culture. It emphasizes testing products for defects and reporting issues to management.
Quality assurance
The document discusses quality assurance in healthcare. It defines quality assurance as ongoing evaluation of patient care to ensure all necessary care was provided. Quality assurance aims to achieve desired outcomes and continual improvement. It involves measuring current practices against standards, analyzing discrepancies, and implementing actions to resolve issues and reward strengths. Factors that can impact quality include lack of resources, training, and incident review procedures. The goal of quality assurance is to continually assess and improve care.
Quality control
Quality control is a process used to ensure a certain level of quality in products or services. It involves examining and testing products or services to ensure they meet requirements for being dependable, satisfactory, safe, and financially sound. Quality control can occur at different stages, such as when raw materials are received, during production, or after a product is finished. Some common quality control methods include check sheets, control charts, histograms, Ishikawa diagrams, Pareto charts, scatter diagrams, and flow charts. Problems with quality control include that it does not add value, is costly, and is sometimes done too late or by the wrong people. Quality assurance focuses on examining the production process to reduce quality issues, while quality control examines the final
Quality control and inspection
This document discusses quality control and inspection. It defines quality as fitness for use and outlines why quality control is important. Quality control involves verifying that products meet requirements through planned and systematic actions. Key aspects of quality control covered include pre-production inspection of materials, in-process inspection during production, and final inspection of finished products. Statistical quality control techniques like control charts and acceptance sampling are also summarized. The document emphasizes that quality control is essential throughout the production system from raw materials to final outputs.
1 Quality Assurance Presentation
The document discusses quality assurance frameworks for software development. It defines quality as meeting requirements and outlines the components of quality assurance including software testing, quality control, and software configuration management. It also discusses developing a software quality assurance plan and references common quality standards like ISO9000, CMM, PCMM, and CMMI. The goal of quality assurance is to ensure software products fulfill criteria and have attributes to meet user needs through systematic quality control activities during development.
LEAN MANUFACTURING IN APPAREL INDUSTRY
This document discusses lean manufacturing in the apparel industry. It introduces lean manufacturing and the seven types of waste. It then outlines some of the key principles, tools, and techniques of lean manufacturing like 5S, just-in-time, kanban, and kaizen. The document also discusses implementing lean manufacturing and lists some of the benefits companies have seen like reductions in production costs, lead time, and cycle time as well as improvements in productivity and quality. It concludes by encouraging lean implementation in industries to improve quality and lower costs.
MayorTek Technical Services - Overview
The document provides an overview of technical services offered by MayorTek including product development, engineering design, quality management, project management, and various specialized services. Key services described include mechanical, electrical, and software engineering; industrial design; systems architecture; testing; regulatory compliance; value analysis; and approaches to optimize design such as design for manufacturing and quality.
Significance of Industry Segments for Best 3D CAM/CAM Solution Mapping - 3D E...
Significance of Industry Segments for Best 3D CAM/CAM Solution Mapping - 3D E...3D Engineering Automation LLP
3D Engineering Automation LLP provides engineering design and manufacturing solutions to various industry segments. It offers CAD, CAM, and CAE software to help with product conception, design, development, manufacturing, and validation. The document discusses the company's solutions and how they fit within the product development lifecycle. It also outlines the various industry segments it serves, including automotive, aerospace, defense, consumer goods, industrial machinery, and others. For each segment, it provides examples of the types of companies and products involved.More Related Content
Viewers also liked
Presentation Of Sapac
Shenzhen Sapac Industry Co., Ltd is a precision plastic injection molding company founded in 2003 with 350 employees. They specialize in automotive parts and have 50 injection molding machines and a tooling shop with 45 machines. They provide design, prototyping, molding, assembly, and logistics services. Their customers include automotive suppliers such as Delphi, Valeo, and Magnet.
Managing Complexity
Sam Wagner presented at the IndustryWeek '09 Best Plants Conference on managing manufacturing complexity through innovative processes at Donnelly Custom Manufacturing. Donnelly started in 1984 with 4 presses and has grown to over 225 employees with 33 presses. They focus on short run production with runs averaging 11 hours. Donnelly addresses complexity through process orientation and measurements, peer accountability, constancy of purpose through quality systems, and attention to detail using techniques like 5S. This allows them to continuously improve their leadership in short run manufacturing.
Lean Manufacturing and Lean Six Sigma
Lean Six Sigma is a methodology based on both Lean Manufacturing and Six Sigma. This presentation gives a brief overview and history of each methodology. Presentation by EMS Consulting Group, Inc. www.emsstrategies.com
MATLAB Modeling of SPT and Grain Size Data in Producing Soil Profile
The study was carried out to find out a suitable numerical procedure for establishing a graphical presentation of the soil profile of a site using SPT values and grain size analysis data. MATLAB numerical tool was used for this purpose and the soil properties was estimated using established empirical correlations. A computer Software was developed where SPT values at borehole locations, percent of grain sizes, water table and GPS coordinates of the site were used as inputs, Rectangular grids in 2-D or 3-D space were created for interpolation or extrapolation of the gridded data in ‘meshgrid’ format. The output yielded intermittent SPT profile and the contour plot matrix for subsoil soil condition of a site. The output soil-profile is presented by a 3-D shaded surface plot that would be useful for preliminary selection of a project site, land use planning, zoning ordinances, pre-disaster planning, capital investment planning,
Fifteen borehole data of SPT values and grain sizes along a 20 km stretch of ongoing Janjira approach road project of Padma multipurpose bridge in Madaripur district were used to verify the usability of the developed Software. Disturbed soil sample were collected up to depths of 19.5m depth in every 1.5m interval to perform grain size analysis test. Excel spreadsheet was used where more than 500 data including SPT-N values, percent sand and fines at depths, GPS coordinated, reduce level and ground water table. The soils at the site were predominantly alluvial deposits. All these data were used in MATLAB interactive environment for numerical computation, visualization, and programming. The purposes of the study were to find SPT contour profile and soil-profile of a particular alignment of the site and to extract borehole Log form SPT profile and soil-profile of a specific location of the alignment.
Outcome of this study can be used in microzonation studies, site response analysis, calculation of bearing capacity of subsoils in the region and producing a number of parameters which are empirically related to SPT values.
iZenBridge's PMP® Math Series: Project Selection : PV , NPV, IRR, BCR and Pay...
Video of this presentation can be found at :
http://youtu.be/yIMMy8hh0WQ
In this presentation we have introduced some of the techniques used while performing project selection, we have seen people getting questions related to PV, NPV , IRR , BCR and Payback period in their PMP exam.
Project Selection falls under Project Integration Management Knowledge Area and it get executed before Project Charter get prepared.
The difference between six sigma and lean manufacturing
The difference between six sigma and lean manufacturing
ENG: Hossam Mostafa Eid
Injection molding process & machine selection
Injection molding machines can fasten the molds in either a horizontal or vertical position. The majority of machines are horizontally oriented, but vertical machines are used in some niche applications such as insert molding, allowing the machine to take advantage of gravity. Some vertical machines also don't require the mold to be fastened. There are many ways to fasten the tools to the platens, the most common being manual clamps (both halves are bolted to the platens); however hydraulic clamps (chocks are used to hold the tool in place) and magnetic clamps are also used. The magnetic and hydraulic clamps are used where fast tool changes are required.
2008 Nov Lessons Learned Lean Six Sigma Balanced Scorecard
This document discusses lessons learned from deploying Lean Six Sigma in services organizations. It provides an overview of key differences between manufacturing and services and discusses challenges in applying Lean Six Sigma tools. The document also discusses approaches to strategic project selection using Balanced Scorecard and Theory of Constraints and outlines lessons learned around deployment criteria, roles, training, and measurement. Current trends indicate Lean Six Sigma is moving towards a more integrated approach and being applied in smaller organizations and healthcare.
assembly line balancing
This document discusses line balancing, which involves assigning tasks along an assembly line to workstations in order to achieve minimum idle time and meet production rates. It defines key terms like cycle time, station time, line efficiency, and smoothness index. It also covers precedence constraints, which restrict the order that work elements can be completed in. Finally, it outlines several common line balancing methods, including Helgeson and Birnie's Ranked Positional Weight method, Kilbridge and Wester's region approach, and the Largest Candidate Rule.
Line balancing and heuristics
This document discusses line balancing in manufacturing, which aims to evenly divide work among workstations in a production process. The goal is to determine the optimal number of workstations, tasks assigned to each, and minimum resources needed. Key terms defined include tasks, task times, cycle time, workstations, and more. Common line balancing procedures involve determining tasks, precedence, times, cycle time, and minimum workstations. Computer programs now help balance large production lines using heuristics like incremental utilization and longest task time.
Daily 15 minute office 5S
Helping you to embrace lean by doing 5S in your office or work-space. A good way for a busy executive to clean up his office, work effectively and learn 5S by experiencing it first hand
Ppt Project Math
This document provides a high-level overview of the history of mathematics, levels of mathematics taught at different grades, famous mathematicians, unsolved math problems, and resources for math games and jokes. It discusses important developments like the first evidence of counting 50,000 BC, the definition of the 360 degree circle in 180 BC, the first trigonometry in 140 BC, and the proofs of Fermat's Last Theorem in 1994 and the Four Color Theorem in the 1970s using computers.
WORK study& LINE BALANCING
This document discusses work study and line balancing for the garments industry. It begins by introducing work study, which involves systematically analyzing work to optimize efficiency. The basic tools of work study are then outlined as work measurement, method study, and time study. Line balancing is introduced as allocating machines and work to individuals according to a work sheet to optimize production. The document then provides details on various aspects of work study and line balancing, including objectives, processes, techniques, and applications to garment manufacturing and sewing. It concludes by outlining the sewing sequence and process for making a polo shirt.
Machine Guarding for Injection Molding Machines
This document provides an overview of machine guarding for injection molding machines. It identifies common injuries that can occur like amputations or burns. Causes include reaching into hazardous areas of machines or bypassing safety guards. The document outlines how to safely operate machines through proper guarding of areas like the point of operation and use of safety devices. It emphasizes adopting a total safety approach to protect workers from injury risks in injection molding processes.
Quality Control
This document discusses quality control procedures for evaluating a project. It outlines several ways to assess quality, including submitting progress reports, conducting pre-and post-tests, providing a warranty, and acknowledging limitations. Quality control focuses on controlling elements of production, ensuring competence, and addressing soft elements like culture. It emphasizes testing products for defects and reporting issues to management.
Quality assurance
The document discusses quality assurance in healthcare. It defines quality assurance as ongoing evaluation of patient care to ensure all necessary care was provided. Quality assurance aims to achieve desired outcomes and continual improvement. It involves measuring current practices against standards, analyzing discrepancies, and implementing actions to resolve issues and reward strengths. Factors that can impact quality include lack of resources, training, and incident review procedures. The goal of quality assurance is to continually assess and improve care.
Quality control
Quality control is a process used to ensure a certain level of quality in products or services. It involves examining and testing products or services to ensure they meet requirements for being dependable, satisfactory, safe, and financially sound. Quality control can occur at different stages, such as when raw materials are received, during production, or after a product is finished. Some common quality control methods include check sheets, control charts, histograms, Ishikawa diagrams, Pareto charts, scatter diagrams, and flow charts. Problems with quality control include that it does not add value, is costly, and is sometimes done too late or by the wrong people. Quality assurance focuses on examining the production process to reduce quality issues, while quality control examines the final
Quality control and inspection
This document discusses quality control and inspection. It defines quality as fitness for use and outlines why quality control is important. Quality control involves verifying that products meet requirements through planned and systematic actions. Key aspects of quality control covered include pre-production inspection of materials, in-process inspection during production, and final inspection of finished products. Statistical quality control techniques like control charts and acceptance sampling are also summarized. The document emphasizes that quality control is essential throughout the production system from raw materials to final outputs.
1 Quality Assurance Presentation
The document discusses quality assurance frameworks for software development. It defines quality as meeting requirements and outlines the components of quality assurance including software testing, quality control, and software configuration management. It also discusses developing a software quality assurance plan and references common quality standards like ISO9000, CMM, PCMM, and CMMI. The goal of quality assurance is to ensure software products fulfill criteria and have attributes to meet user needs through systematic quality control activities during development.
LEAN MANUFACTURING IN APPAREL INDUSTRY
This document discusses lean manufacturing in the apparel industry. It introduces lean manufacturing and the seven types of waste. It then outlines some of the key principles, tools, and techniques of lean manufacturing like 5S, just-in-time, kanban, and kaizen. The document also discusses implementing lean manufacturing and lists some of the benefits companies have seen like reductions in production costs, lead time, and cycle time as well as improvements in productivity and quality. It concludes by encouraging lean implementation in industries to improve quality and lower costs.
Viewers also liked (20)
MATLAB Modeling of SPT and Grain Size Data in Producing Soil Profile
MATLAB Modeling of SPT and Grain Size Data in Producing Soil Profile
iZenBridge's PMP® Math Series: Project Selection : PV , NPV, IRR, BCR and Pay...
iZenBridge's PMP® Math Series: Project Selection : PV , NPV, IRR, BCR and Pay...
The difference between six sigma and lean manufacturing
The difference between six sigma and lean manufacturing
2008 Nov Lessons Learned Lean Six Sigma Balanced Scorecard
2008 Nov Lessons Learned Lean Six Sigma Balanced Scorecard
Similar to Bmed Short Intro
MayorTek Technical Services - Overview
The document provides an overview of technical services offered by MayorTek including product development, engineering design, quality management, project management, and various specialized services. Key services described include mechanical, electrical, and software engineering; industrial design; systems architecture; testing; regulatory compliance; value analysis; and approaches to optimize design such as design for manufacturing and quality.
Significance of Industry Segments for Best 3D CAM/CAM Solution Mapping - 3D E...
Significance of Industry Segments for Best 3D CAM/CAM Solution Mapping - 3D E...3D Engineering Automation LLP
3D Engineering Automation LLP provides engineering design and manufacturing solutions to various industry segments. It offers CAD, CAM, and CAE software to help with product conception, design, development, manufacturing, and validation. The document discusses the company's solutions and how they fit within the product development lifecycle. It also outlines the various industry segments it serves, including automotive, aerospace, defense, consumer goods, industrial machinery, and others. For each segment, it provides examples of the types of companies and products involved.Draft Guidance of 3D Printing Medical Devices issued by FDA on May 10, 2016
Draft Guidance of 3D Printing Medical Devices issued by FDA on May 10, 2016Wen-Feng (Christina) Huang
With blooming demands for 3D printed medical devices, FDA finally issued their draft guidance, Technical Considerations for Additive Manufactured Devices, on May 10, 2016 and open for comments for 90 days.
http://www.fda.gov/MedicalDevices/ProductsandMedicalProcedures/3DPrintingofMedicalDevices/default.htm Moldflow Analysis Presentation
Polysmart is an engineering services company established in 2005 that specializes in plastic design, moldflow analysis, and tool design. It has over 50 years of experience in engineering plastics for industries like automotive and appliances. Polysmart aims to be a world leader in plastics engineering services by offering high quality, cost-effective, and customized solutions to its customers.
ModernTech Overview
- The document discusses ModernTech Mechanical's 3D design and manufacturing solutions and services, and a customer's current CAD software issues with importing and exporting files between Inventor and AutoCAD.
- It demonstrates SolidWorks software and highlights benefits like faster product development, easier manufacturing, and design validation tools like simulation.
- ModernTech's services are described like training, support, staffing assistance, 3D printing, and it lists customers in industries like automotive, medical, and consumer products. Next steps may include attending a product demo or developing an implementation schedule.
Pinnacle Technology Group
Pinnacle offers design, engineering, fabrication, and assembly services for electronic components and finished products. They specialize in product redesign, improvement, and extensions for low to mid volume, high value products. Pinnacle has over 50 employees located in Toledo, OH with expertise in product development, manufacturing, and various industries including medical devices and aviation. They can help clients with every step of the process from design to manufacturing to marketing to increase speed to market and profitability.
Dolphin Products Company Profile Summary Dec 2010
Dolphin Products is a manufacturer of plastic components and solutions established in 1945. It specializes in short-lead time tooling, high precision plastic components, and contract R&D. It serves industries such as automotive, gaming, electrical, industrial, and medical. Dolphin Products aims to be the supplier of choice through innovation, quality, and sustainability. It has over 65 employees and facilities for molding, assembly, and a medical grade cleanroom.
Enventure Technologies An Insight (Smaller Version)
Enventure Technologies is an outsourcing company that provides various business services including content management, engineering, and software development. They have over a decade of experience and proven processes. Outsourcing to Enventure allows clients to focus on core competencies while ensuring quality, on-time delivery, cost effectiveness, and a great customer experience. Their offshore model provides an affordable solution without the need to hire additional employees.
Presentation_12_5_05.ppt
This document discusses how computer-aided manufacturing techniques like computer-aided design, computer-aided engineering, and computer-integrated manufacturing can improve efficiency and quality while reducing costs. It explains that integrating computer systems allows for instant communication between subsystems, better process control, and total quality control. The document also covers topics like computer-aided process planning, simulation, group technology, material requirements planning, and how product design and material selection can optimize a manufacturing process.
AI in Quality Control: How to do visual inspection with AI
About the webinar
Recalls are a manufacturer’s nightmare. Failure to detect and resolve a quality problem that results in a recall costs the business millions of dollars every year, not to mention the brand damage and reputation cost. In some cases, defects can even endanger human lives when it comes to construction, food, airline, or healthcare products.
Leading manufacturers in the food industry, consumer goods, electronics, or any other production line, as well as industries like construction, utilities, etc. are employing AI-powered solutions to detect defects early and avoid the defective products going live.
Machine learning can help to understand the text and extract the sentiment using Natural Language Processing. Sentiment analysis can be applied in a range of business applications like - social media channel analysis, 360-degree customer insights, user reviews, competitive analysis, and many more.
Through this webinar, we will learn how AI and Computer Vision can be used to aid visual inspections and efficiently detect defects to prevent huge money or losses to human lives.
What you will learn
- How various industries are leveraging AI to assist in visual inspections.
- Live Demo: How to collect data, label and train the AI model to detect defects, all within a few minutes.
- Address the challenges of AI & Machine learning and how to overcome them.
Ap Public [Engin]
Alfredo Perilli is a 45-year-old automation engineer with 15 years of experience in the plastic field. He currently works as a technician for Ikea, where he is responsible for product development and quality control. In his role, he schedules projects, engineers products from design to production, and works to reduce costs. He also defines quality control procedures, performs risk analysis, and handles product certification and claims.
General Data Overview
General Data is a labeling solutions provider founded in 1981 that offers bar code identification, data capture, and enterprise mobility systems. They provide stock and custom labels, tags, ribbons, and printing systems. General Data also offers data collection equipment like scanners and mobile computers, as well as service options for equipment repair and maintenance.
2016 winmate corporate presentation in brief
Winmate's 2016 corporate presentation outlines their vision to enable intelligent applications, enhance user experience through latest technologies, and fulfill requirements for harsh environments and mission critical tasks. It discusses Winmate's strategy of moving from primarily selling components and standard products, to offering hardware, software, and customized solutions. The presentation describes Winmate's organization and core competencies in manufacturing, design engineering, and product offerings. It highlights Winmate's technology capabilities in various areas including electronics, mechanics, certification, and embedded software. Finally, it identifies Winmate's 2016 focus markets and product lines such as industrial displays, panel PCs, marine, military, and vehicle applications.
Production & operations management
The document provides an overview of operations management concepts including:
- The 10 decision areas of operations management including product/service design, quality, and capacity planning.
- Different types of production systems such as job shop, batch, and mass production and factors to consider when selecting a process.
- Key facility location factors and the general procedure for evaluating location alternatives.
Plm rev5 innovation 2012
The document discusses Carestream Health's transformation to a global product development model through implementing a holistic PLM (Product Lifecycle Management) solution. Key steps included aligning IT and R&D, selecting technology partners through a rigorous evaluation, and establishing a standard global architecture and processes. This improved collaboration, sped development cycles, and better supported compliance and quality across a distributed workforce.
Corporate Presentation Linkedin
Patni Computer Systems provides IT services and solutions with a focus on quality, security, scalability, and efficiency based on over 30 years of experience. It has a mature global delivery model with processes, people, and infrastructure to ensure excellence in delivery. Key aspects of its approach include strong industry and domain expertise, a focus on business value, flexibility, and single point accountability.
Enterprise Grade Data Labeling - Design Your Ground Truth to Scale in Produ...
We describe why and how to be mindful about designing you data annotation pipeline to be scalable and to delivery consistent high quality results regardless of domain
Samples Management System
Navsya Technologies Pvt. Ltd. provides various technology services and products including customized solutions, e-business portals, online identities, and more. They have developed a Samples Management System to help companies in the garment industry manage the sampling process from design to production. The system allows users to create samples, define styles, fabrics, colors and sizes, upload photos, set prices and dispatch dates, and more. It provides benefits like a single repository of information, secure access, improved communication, and increased efficiency.
Additive Manufacturing(3d printing)
The 3D printing process builds a three-dimensional object from a computer-aided design model, usually by successively adding material layer by layer, which is why it is also called additive manufacturing,
Dennis Mulrane Skills
This document provides a summary of an individual's work experience and qualifications. It outlines their expertise in areas such as customer satisfaction, quality systems, operations management, project management, and purchasing. It also lists manufacturing processes and quality certifications they have experience with, as well as customer audit approvals and professional accomplishments. Their experience spans multiple industries and they have received positive feedback and recognition from previous employers.
Similar to Bmed Short Intro (20)
Significance of Industry Segments for Best 3D CAM/CAM Solution Mapping - 3D E...
Significance of Industry Segments for Best 3D CAM/CAM Solution Mapping - 3D E...
Draft Guidance of 3D Printing Medical Devices issued by FDA on May 10, 2016
Draft Guidance of 3D Printing Medical Devices issued by FDA on May 10, 2016
Enventure Technologies An Insight (Smaller Version)
Enventure Technologies An Insight (Smaller Version)
AI in Quality Control: How to do visual inspection with AI
AI in Quality Control: How to do visual inspection with AI
Enterprise Grade Data Labeling - Design Your Ground Truth to Scale in Produ...
Enterprise Grade Data Labeling - Design Your Ground Truth to Scale in Produ...
Bmed Short Intro
- 1. Balda Solutions Medical Segment Company Introduction
- 14. Examples of products Handheld Devices
- 18. Thank you for your time Additional questions please contact : Hector A Maza [email_address] Direct : (408)761-6276 Hector A Maza National Sales Manager USA Balda | Solutions USA 2803 Slater Road, Suite 207 |Morrisville, NC 27560 Web: http://www.Balda-USA.com Ph: +1 (919) 459-1660 x229 | Fax: 459-1661 Email: [email_address] Mobile : +1(408)761-6276
Editor's Notes
- IMD-Spritzgießen (Inmould Decoration) Transfer einer Dekoration vom Folienträger auf das Bauteil im Spritzgießwerkzeug als Folie wird eine modifizierte Heißprägefolie eingesetzt Dekoration und Herstellung des Bauteils werden in einem Arbeitsschritt durchgeführt 3D-IMF-Spritzgießen (3D-Inmould Foiling) Hinterspritzen dekorierter und 3D-vorgeformter Folien dekorative Folien und Kunststoffe werden während des Spritzgießverfahrens verbunden in Kombination mit vorgeformten Einlegefolien erweiterte 3D-Fähigkeit gegenüber der IMD-Technik maximale Auswahl an Grafiken und Farben, einschließlich Metall- und Karbonoptik, sowie Chrom- und Sondereffekten