Barrett M107 .50 CAL SNIPER RIFLE
•Download as PPTX, PDF•
4 likes•4,037 views
The M82/107 is a recoil-operated, semi-automatic anti-materiel rifle developed by Barrett Firearms Manufacturing. It is used by many military units around the world and known as the "Light Fifty" for its .50 BMG chambering. The M82/107 is a heavy rifle capable of effectively engaging targets out to 2,000 yards with 10 round magazines.
Report
Share
Report
Share
Recommended
Hygrothermal Stresses and Strains in a Lamina
Hygrothermal stresses and strains refer to stresses and strains that result from changes in both temperature and moisture content. When composite materials cool after processing, residual stresses develop due to the different coefficients of thermal expansion of the fiber and matrix. Absorption or desorption of moisture by the polymer matrix also leads to swelling and associated stresses. The total strain in a composite lamina is the sum of mechanical, thermal, and moisture-induced strains. Stress-strain relationships are developed to analyze hygrothermal stresses and strains in both unidirectional and angle laminae.
Polymer matrix composites
The document discusses different types of polymer matrix composites, including thermoset and thermoplastic matrices. It covers various processing techniques for composites such as hand layup, filament winding, and injection molding. Key topics include the properties and applications of polymer composites as well as the effects of temperature on thermoplastic polymers.
Thermoforming (MIT 2.008x Lecture Slides)
Slides accompanying 2.008x* video module on Thermoforming, Prof. John Hart, MIT, 2016.
*Fundamentals of Manufacturing Processes on edX: https://www.edx.org/course/fundamentals-manufacturing-processes-mitx-2-008x
Composite Plate Optimization with Practical Design Constraints
Composite free size optimization has the potential to generate weight savings and performance improvements for many applications of composite structures. Key to realizing such improvements is practical application of design and manufacturing constraints in the optimization model.
Fracture Mechanics & Failure Analysis:Lecture Toughness and fracture toughness
Fracture Mechanics & Failure Analysis:Lecture Toughness and fracture toughnessNED University of Engineering and Technology
This document discusses toughness and fracture toughness testing. It defines toughness as the energy absorbed by a material until fracture. Common toughness tests include the Charpy and Izod impact tests, which measure the energy absorbed during a high-velocity impact. However, these tests do not provide data needed for designing with cracks and flaws. Fracture toughness is a better property for design, as it indicates the stress required to propagate a preexisting flaw. The document outlines fracture toughness testing methods like compact tension and single edge notch bending specimens. It also discusses factors that influence fracture toughness values like material thickness, grain orientation, and plane strain versus plane stress conditions.vdocuments.net_norsok-piping-standard.pdf
This document provides standards for piping fabrication, installation, flushing, pressure testing, chemical cleaning, and hot oil flushing for offshore oil and gas production facilities. It specifies requirements for materials, fabrication, installation, flushing methods including hydro flushing and air shockblowing, pressure testing, cleaning, marking, and documentation. The document aims to standardize piping practices across the Norwegian petroleum industry for new and existing developments.
prepreg and Resin transfer molding
The document discusses prepreg and resin transfer molding processes for manufacturing textile composites. Prepregs are fibers pre-impregnated with resin that are used to make composites. The processing involves aligning fibers, adding resin-coated backing sheets, and compacting layers. Resin transfer molding injects resin into a closed mold containing fibers to produce near-net shape parts. The process involves pumping resin and catalyst, mixing, injecting the mixture into the mold containing fibers, and curing the part. Both processes produce composites with low void content and control over fiber content and thickness.
7075 Aluminium alloy
The document discusses the 7075 aluminium alloy. It provides details on its composition, key features such as high strength to weight ratio and fatigue strength, and manufacturing process. 7075 aluminium alloy is produced through processes including DC casting of molten aluminium, hot rolling, and heat treating to achieve the T6 temper which yields the alloy's peak strength. It is commonly used in aerospace and military applications due to its combination of strength, corrosion resistance, and machinability.
Recommended
Hygrothermal Stresses and Strains in a Lamina
Hygrothermal stresses and strains refer to stresses and strains that result from changes in both temperature and moisture content. When composite materials cool after processing, residual stresses develop due to the different coefficients of thermal expansion of the fiber and matrix. Absorption or desorption of moisture by the polymer matrix also leads to swelling and associated stresses. The total strain in a composite lamina is the sum of mechanical, thermal, and moisture-induced strains. Stress-strain relationships are developed to analyze hygrothermal stresses and strains in both unidirectional and angle laminae.
Polymer matrix composites
The document discusses different types of polymer matrix composites, including thermoset and thermoplastic matrices. It covers various processing techniques for composites such as hand layup, filament winding, and injection molding. Key topics include the properties and applications of polymer composites as well as the effects of temperature on thermoplastic polymers.
Thermoforming (MIT 2.008x Lecture Slides)
Slides accompanying 2.008x* video module on Thermoforming, Prof. John Hart, MIT, 2016.
*Fundamentals of Manufacturing Processes on edX: https://www.edx.org/course/fundamentals-manufacturing-processes-mitx-2-008x
Composite Plate Optimization with Practical Design Constraints
Composite free size optimization has the potential to generate weight savings and performance improvements for many applications of composite structures. Key to realizing such improvements is practical application of design and manufacturing constraints in the optimization model.
Fracture Mechanics & Failure Analysis:Lecture Toughness and fracture toughness
Fracture Mechanics & Failure Analysis:Lecture Toughness and fracture toughnessNED University of Engineering and Technology
This document discusses toughness and fracture toughness testing. It defines toughness as the energy absorbed by a material until fracture. Common toughness tests include the Charpy and Izod impact tests, which measure the energy absorbed during a high-velocity impact. However, these tests do not provide data needed for designing with cracks and flaws. Fracture toughness is a better property for design, as it indicates the stress required to propagate a preexisting flaw. The document outlines fracture toughness testing methods like compact tension and single edge notch bending specimens. It also discusses factors that influence fracture toughness values like material thickness, grain orientation, and plane strain versus plane stress conditions.vdocuments.net_norsok-piping-standard.pdf
This document provides standards for piping fabrication, installation, flushing, pressure testing, chemical cleaning, and hot oil flushing for offshore oil and gas production facilities. It specifies requirements for materials, fabrication, installation, flushing methods including hydro flushing and air shockblowing, pressure testing, cleaning, marking, and documentation. The document aims to standardize piping practices across the Norwegian petroleum industry for new and existing developments.
prepreg and Resin transfer molding
The document discusses prepreg and resin transfer molding processes for manufacturing textile composites. Prepregs are fibers pre-impregnated with resin that are used to make composites. The processing involves aligning fibers, adding resin-coated backing sheets, and compacting layers. Resin transfer molding injects resin into a closed mold containing fibers to produce near-net shape parts. The process involves pumping resin and catalyst, mixing, injecting the mixture into the mold containing fibers, and curing the part. Both processes produce composites with low void content and control over fiber content and thickness.
7075 Aluminium alloy
The document discusses the 7075 aluminium alloy. It provides details on its composition, key features such as high strength to weight ratio and fatigue strength, and manufacturing process. 7075 aluminium alloy is produced through processes including DC casting of molten aluminium, hot rolling, and heat treating to achieve the T6 temper which yields the alloy's peak strength. It is commonly used in aerospace and military applications due to its combination of strength, corrosion resistance, and machinability.
Shape memory polymers
Shape memory polymers are polymers that can be deformed from an original shape to a temporary shape when exposed to an external stimulus like heat or light, and then returned to their original shape upon removal of that stimulus. The document discusses the history and chemistry behind shape memory polymers, how they are activated by heat, light, electricity or other means, and their applications in areas like medical devices and textiles. It also notes limitations like transition limits and temperature ranges that need further research to expand shape memory polymer capabilities and applications.
Shape memory alloys
Shape memory alloys (SMAs) undergo a solid-to-solid phase transformation from martensite to austenite phases in response to temperature changes or stress, allowing large recoverable strains. SMAs such as nitinol exhibit one-way or two-way shape memory behavior and are used in applications like couplings, MEMS actuators and sensors, and microvalves. Common SMAs include nitinol, Cu-Zn-Al, and Cu-Al-Ni alloys.
Injection Molding (MIT 2.008x Lecture Slides)
The document discusses injection molding. It begins with an overview of injection molding and the types of products made through the process. It then covers the fundamentals of polymers used in injection molding, including their properties and how they behave under heat and pressure. The document outlines the key components of injection molding machines and mold tooling, and reviews the injection molding process parameters and how they impact the filling and cooling cycles. It also discusses common defects and guidelines for part design. Advanced topics covered include side-action molding, insert molding, and overmolding.
Chapter 1 introduction to polymers
The document discusses the classification of materials used by humans including metals, ceramics, and polymers. It then provides details on the course content which covers topics like the introduction, definition, and formation of polymers as well as their characteristics and applications. The presentation concludes by emphasizing the importance of polymers in fields such as automobiles, medicine, sports, and consumer goods.
creep deformation of the Materials
This document discusses creep deformation, which is the time-dependent plastic deformation of materials under constant stress, especially at elevated temperatures. It defines creep and identifies the primary mechanisms as bulk diffusion, grain boundary diffusion, and dislocation climb/creep. The document details experimental creep tests to determine creep rates and parameters, which provide prediction of life expectancy. It also discusses design considerations like reducing grain boundaries and employing high melting temperature materials to minimize creep deformation.
Composites
This document provides an overview of composite materials, including definitions, key components, types of composites, and applications. It defines a composite as a material made from two or more constituent materials combined to give unique properties. Composites consist of a reinforcement material, such as fibers, and a matrix that holds the reinforcements together. The document describes different types of reinforcements, matrices, and the roles they play in composites. It also outlines various composite material types and their applications in industries such as aerospace, automotive, marine, and consumer goods.
COMPOSITE FABRICATION TECHNIQUES
The fabrication methodology of a composite part depends mainly on three factors:
(i) the characteristics of matrices and reinforcements,
(ii) the shapes, sizes and engineering details of products, and
(iii) end uses.
The composite products are too many and cover a very wide domain of applications ranging from an engine valve to an aircraft wing.
The fabrication technique varies from one product to the other.
Wear of polymers
This textbook covers the wear of polymers and composites. It discusses key topics in polymer tribology including the factors that affect the friction and wear of polymers like sliding speed, temperature, load and surface roughness. It also examines the sliding mechanics of polymers such as the formation of transfer films, different wear regimes, flash temperature generation and the third body effect. Finally, it analyzes the fatigue wear of unfilled polymers under fluctuating loads and the influence of surface defects on wear. The book provides a comprehensive introduction to polymer tribology and the mechanisms that govern the wear of polymers.
SHAPE MEMORY ALLOY
This document discusses applications of shape memory alloys in various aviation fields. Shape memory alloys are metal alloys that remember their original shape and can recover their shape upon heating if deformed. Some key applications discussed include using shape memory alloys for leak handling in aircraft pipe systems, self-deploying antennas, variable geometry chevrons to reduce engine noise, space craft release mechanisms, and variable area fan nozzles to improve fuel efficiency. The document concludes that shape memory alloys can integrate sensing, control, and actuation and be applied more widely in aviation due to their unique memory effect and high energy density.
Class3
1. The strength of materials is dictated not by bond strength alone, but also by defects. According to Griffith's equation, as defects get smaller or are eliminated, strength increases.
2. Defects have no effect on a material's modulus, only on its strength. Materials with zero defects would be infinitely strong, which is impossible.
3. The strength of fibers is statistical and depends on the probability of critical defects occurring based on the fiber's size and applied stress, following a Weibull distribution. Larger fibers have a higher probability of failure.
Micromechanics of Composite Materials
This document discusses the course MDPN452 Mechanics of Composite Materials, taught by Dr. Mohammad Tawfik. It covers topics related to micromechanics of composites including the relationship between composite and constituent material properties, designing composites to achieve desired stiffness and strength, assumptions of micromechanics models, approaches to determining elastic properties like stiffness and Poisson's ratio, and models for predicting strength in tension and compression. Students are assigned homework to research models of tensile and compressive failure in composites and compare them to experimental data.
Thermosetting, thermoplastics and elastomers
This document summarizes three types of polymers - thermosetting polymers, thermoplastics, and elastomers. Thermosetting polymers retain their shape even when heated and are used to produce permanent components. Thermoplastics can be melted and reshaped but thermosettings cannot. Common applications of thermoplastics include food storage containers and plastic bags. Elastomers are polymers that are flexible and elastic. They are used to make products like shoe heels, wheels, and wetsuits.
SHAPE MEMORY POLYMERS
Shape-memory polymers are smart materials that have the ability to return from a deformed state to their original shape induced by an external stimulus, such as temperature change.
Fabrication of composite leaf spring
This document discusses the fabrication of composite leaf springs for vehicle suspension systems. It aims to reduce vehicle weight through the use of composite materials like glass fiber reinforced plastic (GFRP) instead of conventional steel springs. The document outlines the manufacturing process of composite leaf springs using hand lay-up techniques with GFRP and epoxy. It also summarizes the advantages of composite leaf springs like reduced weight and corrosion resistance compared to steel, though their production cost is currently higher. Experimental testing showed composite leaf springs have lower deflection and bending stress than steel springs under the same loads.
Shape Memory alloy Nitnol
Shape memory alloy, application of shape memory alloy, need for the shape ,memory alloy, recent advantages in the materials , Nasa new material for MARS rovers
Composites manufacturing technology
The document provides information on composites manufacturing technology. It begins with an introduction to composites, their components, characteristics, and classifications. It then discusses various manufacturing processes for composites like hand layup, vacuum bagging, compression molding, and filament winding. The document also includes a case study on the Boeing 787 Dreamliner, highlighting how composites improved its performance and the challenges faced during production. It concludes with advantages and applications of composites in industries like aerospace as well as future developments in nanocomposites and biomedical applications.
Composite structure manufacturing
This document discusses out of autoclave composite manufacturing and resin transfer molding (RTM) as alternative processes to traditional autoclave curing. RTM involves placing fiber reinforcement in a closed mold and injecting resin under pressure and heat without an autoclave. The resin cures as it flows through the mold. RTM produces high strength, lightweight composite parts with complex shapes. It is commonly used for aircraft, boat, and wind turbine components. The document provides overviews of RTM and out of autoclave processes, companies that use RTM, benefits, applications, and references for further information.
Application of shape memory alloys in Aerospace industries
Application of shape memory alloys in Aerospace industries
Chevrons, Nozzles and Telescopic wing system
Extrusion
Extrusion is a process where a block of metal is reduced in cross-section by forcing it to flow through a die under high pressure. There are different types of extrusion classified by direction (direct/indirect), temperature (hot/cold), and equipment (horizontal/vertical presses). Key equipment includes presses, dies, and tools. Dies must withstand high stresses and be designed for the desired shape. Process variables like temperature, extrusion ratio, and friction affect the required extrusion force. Hot extrusion near 50-75% of melting temperature is most common to reduce deformation resistance.
Manufacture of composites
The document discusses various techniques for manufacturing composites, including hand layup, pultrusion, resin transfer molding, and injection molding. It provides details on the hand layup process, describing how dry fibers and resins are layered by hand in an open mold. Pultrusion is defined as a continuous process that pulls reinforced fibers through a resin bath and heated die to produce cured, constant cross-section parts. Resin transfer molding involves packing dry fibers into a mold, injecting resin under pressure, and curing the mold to produce complex, net-shape parts in medium volumes. Each technique has advantages for certain applications in industries like aerospace, transportation, and construction.
explicit dynamics
ANSYS/LS-DYNA is a general purpose explicit dynamics finite element program that allows for highly nonlinear transient dynamic simulations. It provides a seamless interface between ANSYS for pre- and post-processing and the LS-DYNA solver. Key benefits include support for advanced material models, large deformations, and a variety of contact types through the robust LS-DYNA solver. Common applications include crashworthiness analysis, manufacturing process simulations, and impact/contact simulations.
Assignment 1 copy 1
The document summarizes a study that investigated children's conceptions of day and night. The author interviewed two children - a year 3 student and a year 2 student - asking them to draw pictures of day and night and answer questions about what causes day and night. Many children were found to have "alternative conceptions" that differ from scientific explanations, such as believing the sun goes behind hills or clouds at night. The interviews aimed to identify the children's prior knowledge and alternative conceptions in order to effectively plan science lessons addressing misconceptions.
More Related Content
What's hot
Shape memory polymers
Shape memory polymers are polymers that can be deformed from an original shape to a temporary shape when exposed to an external stimulus like heat or light, and then returned to their original shape upon removal of that stimulus. The document discusses the history and chemistry behind shape memory polymers, how they are activated by heat, light, electricity or other means, and their applications in areas like medical devices and textiles. It also notes limitations like transition limits and temperature ranges that need further research to expand shape memory polymer capabilities and applications.
Shape memory alloys
Shape memory alloys (SMAs) undergo a solid-to-solid phase transformation from martensite to austenite phases in response to temperature changes or stress, allowing large recoverable strains. SMAs such as nitinol exhibit one-way or two-way shape memory behavior and are used in applications like couplings, MEMS actuators and sensors, and microvalves. Common SMAs include nitinol, Cu-Zn-Al, and Cu-Al-Ni alloys.
Injection Molding (MIT 2.008x Lecture Slides)
The document discusses injection molding. It begins with an overview of injection molding and the types of products made through the process. It then covers the fundamentals of polymers used in injection molding, including their properties and how they behave under heat and pressure. The document outlines the key components of injection molding machines and mold tooling, and reviews the injection molding process parameters and how they impact the filling and cooling cycles. It also discusses common defects and guidelines for part design. Advanced topics covered include side-action molding, insert molding, and overmolding.
Chapter 1 introduction to polymers
The document discusses the classification of materials used by humans including metals, ceramics, and polymers. It then provides details on the course content which covers topics like the introduction, definition, and formation of polymers as well as their characteristics and applications. The presentation concludes by emphasizing the importance of polymers in fields such as automobiles, medicine, sports, and consumer goods.
creep deformation of the Materials
This document discusses creep deformation, which is the time-dependent plastic deformation of materials under constant stress, especially at elevated temperatures. It defines creep and identifies the primary mechanisms as bulk diffusion, grain boundary diffusion, and dislocation climb/creep. The document details experimental creep tests to determine creep rates and parameters, which provide prediction of life expectancy. It also discusses design considerations like reducing grain boundaries and employing high melting temperature materials to minimize creep deformation.
Composites
This document provides an overview of composite materials, including definitions, key components, types of composites, and applications. It defines a composite as a material made from two or more constituent materials combined to give unique properties. Composites consist of a reinforcement material, such as fibers, and a matrix that holds the reinforcements together. The document describes different types of reinforcements, matrices, and the roles they play in composites. It also outlines various composite material types and their applications in industries such as aerospace, automotive, marine, and consumer goods.
COMPOSITE FABRICATION TECHNIQUES
The fabrication methodology of a composite part depends mainly on three factors:
(i) the characteristics of matrices and reinforcements,
(ii) the shapes, sizes and engineering details of products, and
(iii) end uses.
The composite products are too many and cover a very wide domain of applications ranging from an engine valve to an aircraft wing.
The fabrication technique varies from one product to the other.
Wear of polymers
This textbook covers the wear of polymers and composites. It discusses key topics in polymer tribology including the factors that affect the friction and wear of polymers like sliding speed, temperature, load and surface roughness. It also examines the sliding mechanics of polymers such as the formation of transfer films, different wear regimes, flash temperature generation and the third body effect. Finally, it analyzes the fatigue wear of unfilled polymers under fluctuating loads and the influence of surface defects on wear. The book provides a comprehensive introduction to polymer tribology and the mechanisms that govern the wear of polymers.
SHAPE MEMORY ALLOY
This document discusses applications of shape memory alloys in various aviation fields. Shape memory alloys are metal alloys that remember their original shape and can recover their shape upon heating if deformed. Some key applications discussed include using shape memory alloys for leak handling in aircraft pipe systems, self-deploying antennas, variable geometry chevrons to reduce engine noise, space craft release mechanisms, and variable area fan nozzles to improve fuel efficiency. The document concludes that shape memory alloys can integrate sensing, control, and actuation and be applied more widely in aviation due to their unique memory effect and high energy density.
Class3
1. The strength of materials is dictated not by bond strength alone, but also by defects. According to Griffith's equation, as defects get smaller or are eliminated, strength increases.
2. Defects have no effect on a material's modulus, only on its strength. Materials with zero defects would be infinitely strong, which is impossible.
3. The strength of fibers is statistical and depends on the probability of critical defects occurring based on the fiber's size and applied stress, following a Weibull distribution. Larger fibers have a higher probability of failure.
Micromechanics of Composite Materials
This document discusses the course MDPN452 Mechanics of Composite Materials, taught by Dr. Mohammad Tawfik. It covers topics related to micromechanics of composites including the relationship between composite and constituent material properties, designing composites to achieve desired stiffness and strength, assumptions of micromechanics models, approaches to determining elastic properties like stiffness and Poisson's ratio, and models for predicting strength in tension and compression. Students are assigned homework to research models of tensile and compressive failure in composites and compare them to experimental data.
Thermosetting, thermoplastics and elastomers
This document summarizes three types of polymers - thermosetting polymers, thermoplastics, and elastomers. Thermosetting polymers retain their shape even when heated and are used to produce permanent components. Thermoplastics can be melted and reshaped but thermosettings cannot. Common applications of thermoplastics include food storage containers and plastic bags. Elastomers are polymers that are flexible and elastic. They are used to make products like shoe heels, wheels, and wetsuits.
SHAPE MEMORY POLYMERS
Shape-memory polymers are smart materials that have the ability to return from a deformed state to their original shape induced by an external stimulus, such as temperature change.
Fabrication of composite leaf spring
This document discusses the fabrication of composite leaf springs for vehicle suspension systems. It aims to reduce vehicle weight through the use of composite materials like glass fiber reinforced plastic (GFRP) instead of conventional steel springs. The document outlines the manufacturing process of composite leaf springs using hand lay-up techniques with GFRP and epoxy. It also summarizes the advantages of composite leaf springs like reduced weight and corrosion resistance compared to steel, though their production cost is currently higher. Experimental testing showed composite leaf springs have lower deflection and bending stress than steel springs under the same loads.
Shape Memory alloy Nitnol
Shape memory alloy, application of shape memory alloy, need for the shape ,memory alloy, recent advantages in the materials , Nasa new material for MARS rovers
Composites manufacturing technology
The document provides information on composites manufacturing technology. It begins with an introduction to composites, their components, characteristics, and classifications. It then discusses various manufacturing processes for composites like hand layup, vacuum bagging, compression molding, and filament winding. The document also includes a case study on the Boeing 787 Dreamliner, highlighting how composites improved its performance and the challenges faced during production. It concludes with advantages and applications of composites in industries like aerospace as well as future developments in nanocomposites and biomedical applications.
Composite structure manufacturing
This document discusses out of autoclave composite manufacturing and resin transfer molding (RTM) as alternative processes to traditional autoclave curing. RTM involves placing fiber reinforcement in a closed mold and injecting resin under pressure and heat without an autoclave. The resin cures as it flows through the mold. RTM produces high strength, lightweight composite parts with complex shapes. It is commonly used for aircraft, boat, and wind turbine components. The document provides overviews of RTM and out of autoclave processes, companies that use RTM, benefits, applications, and references for further information.
Application of shape memory alloys in Aerospace industries
Application of shape memory alloys in Aerospace industries
Chevrons, Nozzles and Telescopic wing system
Extrusion
Extrusion is a process where a block of metal is reduced in cross-section by forcing it to flow through a die under high pressure. There are different types of extrusion classified by direction (direct/indirect), temperature (hot/cold), and equipment (horizontal/vertical presses). Key equipment includes presses, dies, and tools. Dies must withstand high stresses and be designed for the desired shape. Process variables like temperature, extrusion ratio, and friction affect the required extrusion force. Hot extrusion near 50-75% of melting temperature is most common to reduce deformation resistance.
Manufacture of composites
The document discusses various techniques for manufacturing composites, including hand layup, pultrusion, resin transfer molding, and injection molding. It provides details on the hand layup process, describing how dry fibers and resins are layered by hand in an open mold. Pultrusion is defined as a continuous process that pulls reinforced fibers through a resin bath and heated die to produce cured, constant cross-section parts. Resin transfer molding involves packing dry fibers into a mold, injecting resin under pressure, and curing the mold to produce complex, net-shape parts in medium volumes. Each technique has advantages for certain applications in industries like aerospace, transportation, and construction.
What's hot (20)
Application of shape memory alloys in Aerospace industries
Application of shape memory alloys in Aerospace industries
Viewers also liked
explicit dynamics
ANSYS/LS-DYNA is a general purpose explicit dynamics finite element program that allows for highly nonlinear transient dynamic simulations. It provides a seamless interface between ANSYS for pre- and post-processing and the LS-DYNA solver. Key benefits include support for advanced material models, large deformations, and a variety of contact types through the robust LS-DYNA solver. Common applications include crashworthiness analysis, manufacturing process simulations, and impact/contact simulations.
Assignment 1 copy 1
The document summarizes a study that investigated children's conceptions of day and night. The author interviewed two children - a year 3 student and a year 2 student - asking them to draw pictures of day and night and answer questions about what causes day and night. Many children were found to have "alternative conceptions" that differ from scientific explanations, such as believing the sun goes behind hills or clouds at night. The interviews aimed to identify the children's prior knowledge and alternative conceptions in order to effectively plan science lessons addressing misconceptions.
Yahoo
'American Sniper' Widow Speechless After Rifle RaffleFor one more weekend break, spectators will be ...
Cheat codes
This document contains a list of cheat codes for a game. It provides 25 codes that can be used to adjust various game settings and mechanics, including adjusting gravity, enabling auto-aim, changing weapon loadouts, adjusting the timer for planting bombs, and toggling features like friendly fire and flashlight use. The codes allow modifying settings like round time limits, cash amounts, and more for debugging or testing purposes.
The Market Sniper - Francis Hunt - Cantos Charts 10th Jan 2011
This document contains charts and analyses for various currency pairs, commodities, stocks, and economic indexes over different timeframes. It also announces two upcoming webinars and seminars from The Market Sniper on identifying volatility funnels and common trading mistakes, including details on dates, locations, and registration prices.
American Sniper
The document provides information about the film American Sniper including trailers released to promote the film, the storyline about Chris Kyle joining the Navy SEALS and tours in Iraq, the film's budget and box office figures, details about it being directed by Clint Eastwood and starring Bradley Cooper, and background on the production companies Warner Brothers and Clint Eastwood as a director.
Delta force
This document lists several firearms including the M4+M203 assault rifle, M40A1 sniper rifle, Barrett Light .50 caliber sniper rifle, H&K MP5 submachine gun, M249 SAW light machine gun, 2 LAW anti-tank rocket launchers, Spec Ops .45 caliber pistol, and HS .22 caliber suppressed pistol.
The Sniper by Liam O Flaherty
1) A Republican sniper lies on a rooftop in Dublin during a civil war, observing the fighting between Republicans and Free Staters through his field glasses.
2) He comes under fire from an enemy sniper across the street and engages in a gunfight, during which he is wounded in the forearm.
3) That night, he devises a plan to trick the enemy sniper into exposing himself, and successfully shoots and kills his opponent with his revolver. However, the experience leaves him shaken and remorseful about the violence of war.
The Sniper
The summary provides the key details of the short story "The Sniper" by Liam O'Flaherty in 3 sentences:
An IRA sniper posts himself on a rooftop in Dublin during the Irish Civil War and kills an enemy turret gunner and an old woman, but is then shot in the arm by an opposing sniper across the way. Using a plan to trick the other sniper, he fakes his death and shoots his enemy when he lets his guard down, only to discover that the other sniper was actually his brother.
Sniper rifles
1) Sniper rifles are long-range precision rifles used to attack targets from concealed positions.
2) Common sniper rifles discussed include the M40 and Mosin-Nagant rifles, which use 7.62mm ammunition.
3) Sniper rifles often have adjustable scopes in the 2.5-3x range for accurate shooting at long distances.
Airplane Impact Examples Using ANSYS Explicit Dynamics
This presentation shows examples of the impact of a bird strike on the nose and wing of an airplane.
Usmc Snipers
The USMC has used snipers since its formation, though the role has evolved over time. This document profiles several famous Marine Corps snipers, including Carlos Hathcock, considered the most successful sniper in history. Hathcock had over 93 confirmed kills during two tours in Vietnam between 1967-1969. He was known for feats like shooting an enemy sniper through his scope at long range. Marine snipers undergo extensive training to develop precision shooting skills and are critical assets in combat operations.
Sniper fx mm presentation (5m) oct.2012
The document discusses compensation that includes a 40% commission plus additional performance-based shares. It refers to a monthly calculation of this compensation structure for a particular trade period in October 2012.
Viewers also liked (15)
The Market Sniper - Francis Hunt - Cantos Charts 10th Jan 2011
The Market Sniper - Francis Hunt - Cantos Charts 10th Jan 2011
Airplane Impact Examples Using ANSYS Explicit Dynamics
Airplane Impact Examples Using ANSYS Explicit Dynamics
Aralin 23 - Ang Salapi at Ang Bangko Sentral ng Pilipinas
Aralin 23 - Ang Salapi at Ang Bangko Sentral ng Pilipinas
Recently uploaded
Suzanne Lagerweij - Influence Without Power - Why Empathy is Your Best Friend...
This is a workshop about communication and collaboration. We will experience how we can analyze the reasons for resistance to change (exercise 1) and practice how to improve our conversation style and be more in control and effective in the way we communicate (exercise 2).
This session will use Dave Gray’s Empathy Mapping, Argyris’ Ladder of Inference and The Four Rs from Agile Conversations (Squirrel and Fredrick).
Abstract:
Let’s talk about powerful conversations! We all know how to lead a constructive conversation, right? Then why is it so difficult to have those conversations with people at work, especially those in powerful positions that show resistance to change?
Learning to control and direct conversations takes understanding and practice.
We can combine our innate empathy with our analytical skills to gain a deeper understanding of complex situations at work. Join this session to learn how to prepare for difficult conversations and how to improve our agile conversations in order to be more influential without power. We will use Dave Gray’s Empathy Mapping, Argyris’ Ladder of Inference and The Four Rs from Agile Conversations (Squirrel and Fredrick).
In the session you will experience how preparing and reflecting on your conversation can help you be more influential at work. You will learn how to communicate more effectively with the people needed to achieve positive change. You will leave with a self-revised version of a difficult conversation and a practical model to use when you get back to work.
Come learn more on how to become a real influencer!
Competition and Regulation in Professions and Occupations – ROBSON – June 202...
Competition and Regulation in Professions and Occupations – ROBSON – June 202...OECD Directorate for Financial and Enterprise Affairs
This presentation by Professor Alex Robson, Deputy Chair of Australia’s Productivity Commission, was made during the discussion “Competition and Regulation in Professions and Occupations” held at the 77th meeting of the OECD Working Party No. 2 on Competition and Regulation on 10 June 2024. More papers and presentations on the topic can be found at oe.cd/crps.
This presentation was uploaded with the author’s consent.Tom tresser burning issue.pptx My Burning issue
Addressing the status of black home ownership in America. and what actions are taken to impact these trends.
Collapsing Narratives: Exploring Non-Linearity • a micro report by Rosie Wells
Insight: In a landscape where traditional narrative structures are giving way to fragmented and non-linear forms of storytelling, there lies immense potential for creativity and exploration.
'Collapsing Narratives: Exploring Non-Linearity' is a micro report from Rosie Wells.
Rosie Wells is an Arts & Cultural Strategist uniquely positioned at the intersection of grassroots and mainstream storytelling.
Their work is focused on developing meaningful and lasting connections that can drive social change.
Please download this presentation to enjoy the hyperlinks!
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...OECD Directorate for Financial and Enterprise Affairs
This presentation by OECD, OECD Secretariat, was made during the discussion “Competition and Regulation in Professions and Occupations” held at the 77th meeting of the OECD Working Party No. 2 on Competition and Regulation on 10 June 2024. More papers and presentations on the topic can be found at oe.cd/crps.
This presentation was uploaded with the author’s consent.
2024-05-30_meetup_devops_aix-marseille.pdf
Slides de notre meetup DevOps AixMarseille du 30 mai 2024 chez SmarTribune
Sujets: platform engineering / terragrunt / test containers
Mẫu PPT kế hoạch làm việc sáng tạo cho nửa cuối năm PowerPoint
Mẫu PPT kế hoạch làm việc sáng tạo cho nửa cuối năm PowerPoint
Carrer goals.pptx and their importance in real life
Career goals serve as a roadmap for individuals, guiding them toward achieving long-term professional aspirations and personal fulfillment. Establishing clear career goals enables professionals to focus their efforts on developing specific skills, gaining relevant experience, and making strategic decisions that align with their desired career trajectory. By setting both short-term and long-term objectives, individuals can systematically track their progress, make necessary adjustments, and stay motivated. Short-term goals often include acquiring new qualifications, mastering particular competencies, or securing a specific role, while long-term goals might encompass reaching executive positions, becoming industry experts, or launching entrepreneurial ventures.
Moreover, having well-defined career goals fosters a sense of purpose and direction, enhancing job satisfaction and overall productivity. It encourages continuous learning and adaptation, as professionals remain attuned to industry trends and evolving job market demands. Career goals also facilitate better time management and resource allocation, as individuals prioritize tasks and opportunities that advance their professional growth. In addition, articulating career goals can aid in networking and mentorship, as it allows individuals to communicate their aspirations clearly to potential mentors, colleagues, and employers, thereby opening doors to valuable guidance and support. Ultimately, career goals are integral to personal and professional development, driving individuals toward sustained success and fulfillment in their chosen fields.
XP 2024 presentation: A New Look to Leadership
Presentation slides from XP2024 conference, Bolzano IT. The slides describe a new view to leadership and combines it with anthro-complexity (aka cynefin).
Mastering the Concepts Tested in the Databricks Certified Data Engineer Assoc...
• For a full set of 760+ questions. Go to
https://skillcertpro.com/product/databricks-certified-data-engineer-associate-exam-questions/
• SkillCertPro offers detailed explanations to each question which helps to understand the concepts better.
• It is recommended to score above 85% in SkillCertPro exams before attempting a real exam.
• SkillCertPro updates exam questions every 2 weeks.
• You will get life time access and life time free updates
• SkillCertPro assures 100% pass guarantee in first attempt.
Presentatie 8. Joost van der Linde & Daniel Anderton - Eliq 28 mei 2024
Dutch Power Event
“AI – Navigeren naar de toekomst?”
Op 28 mei 2024 bij Info Support.
Presentatie 4. Jochen Cremer - TU Delft 28 mei 2024
Dutch Power Event
“AI – Navigeren naar de toekomst?”
Op 28 mei 2024 bij Info Support.
Supercharge your AI - SSP Industry Breakout Session 2024-v2_1.pdf
During the May 2024 SSP Conference in Boston, MA, Margie Hlava gave this presentation during the Industry Breakout Session on May 29, 2024.
ASONAM2023_presection_slide_track-recommendation.pdf
Presented at the 2023 IEEE/ACM International Conference on
Advances in Social Networks Analysis and Mining.
Media as a Mind Controlling Strategy In Old and Modern Era
This presentation, created by Syed Faiz ul Hassan, explores the profound influence of media on public perception and behavior. It delves into the evolution of media from oral traditions to modern digital and social media platforms. Key topics include the role of media in information propagation, socialization, crisis awareness, globalization, and education. The presentation also examines media influence through agenda setting, propaganda, and manipulative techniques used by advertisers and marketers. Furthermore, it highlights the impact of surveillance enabled by media technologies on personal behavior and preferences. Through this comprehensive overview, the presentation aims to shed light on how media shapes collective consciousness and public opinion.
Updated diagnosis. Cause and treatment of hypothyroidism
Types, classification, causes, diagnosis and treatment of hypothyroidism
Recently uploaded (19)
Suzanne Lagerweij - Influence Without Power - Why Empathy is Your Best Friend...
Suzanne Lagerweij - Influence Without Power - Why Empathy is Your Best Friend...
Competition and Regulation in Professions and Occupations – ROBSON – June 202...
Competition and Regulation in Professions and Occupations – ROBSON – June 202...
Collapsing Narratives: Exploring Non-Linearity • a micro report by Rosie Wells
Collapsing Narratives: Exploring Non-Linearity • a micro report by Rosie Wells
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...
Competition and Regulation in Professions and Occupations – OECD – June 2024 ...
Mẫu PPT kế hoạch làm việc sáng tạo cho nửa cuối năm PowerPoint
Mẫu PPT kế hoạch làm việc sáng tạo cho nửa cuối năm PowerPoint
Carrer goals.pptx and their importance in real life
Carrer goals.pptx and their importance in real life
Mastering the Concepts Tested in the Databricks Certified Data Engineer Assoc...
Mastering the Concepts Tested in the Databricks Certified Data Engineer Assoc...
Presentatie 8. Joost van der Linde & Daniel Anderton - Eliq 28 mei 2024
Presentatie 8. Joost van der Linde & Daniel Anderton - Eliq 28 mei 2024
Presentatie 4. Jochen Cremer - TU Delft 28 mei 2024
Presentatie 4. Jochen Cremer - TU Delft 28 mei 2024
Supercharge your AI - SSP Industry Breakout Session 2024-v2_1.pdf
Supercharge your AI - SSP Industry Breakout Session 2024-v2_1.pdf
ASONAM2023_presection_slide_track-recommendation.pdf
ASONAM2023_presection_slide_track-recommendation.pdf
Media as a Mind Controlling Strategy In Old and Modern Era
Media as a Mind Controlling Strategy In Old and Modern Era
Updated diagnosis. Cause and treatment of hypothyroidism
Updated diagnosis. Cause and treatment of hypothyroidism
Barrett M107 .50 CAL SNIPER RIFLE
- 2. The M82/107 is a recoil-operated, semi- automatic anti-materiel rifle developed by the American Barrett Firearms Manufacturing company. A heavy SASR (Special Application Scoped Rifle), it is used by many units and armies around the world. It is also called the "Light Fifty" for its .50 BMG (12.7×99mm NATO) chambering. Barrett M82/107
- 3. M107 •Caliber: .50 BMG (12.7x99 mm) •Length: 1,448 mm (57.0 in) •Barrel length: 737 mm (29.0 in) •Weight (unloaded w/ scope): 12.9 kg (28.4 lb) •Magazine capacity: 10 rounds •Weight of magazine: 1.87 kg (4.1 lb) •Accuracy: 3 Minutes of Arc (MOA) •Muzzle velocity: 853 m/s (2,800 ft/s) •Effective Range: 1,829 m (2,000 yd)
- 4. MUZZLE 1. Effectively spreading smoke and light 2. Remarkably reducing recoil 3. Suppressing instant high intensity flash 4. Durable port for suppressor
- 5. BARREL 1. 508 mm length 2. 0.50 inches diameter 3. Chromium coated from inside 4. 1:10 ratio
- 7. UPPER RECEIVER 1. Made up of gun metal (red brass) 2. 88% copper ,10% tin, 2% zinc 3. Stamp made 4. Easy to replace 5. Slots for quick detachment+atta chment of accesaries 6. High durability as well as fluxebility
- 8. RIFLE SCOPE Features 1. Couples with multiple systems’ elevation knobs 2. Soft touch, water resistant keypad 3. 1.71” (4.44 cm) x .625” (1.58 cm) illuminated LCD display 4. USB connectivity to transfer user programmable custom loads 5. Allows custom cartridge loads
- 9. BOLT 1. Effectively catching ammunation 2. Having tensile strength of 225 MPa to 310 Mpa 3. Effective till its life time of working(approx 4000 shots) 4. Titanium firing pin
- 11. BUTT STOCK 1. Extension of anti recoil spring 2. Soft frame for shoulder 3. 8.1 inches in length 4. Light weight 5. Availability of vertical height extension
- 12. AMMUNATION 1. 3.4 gram of gun powder 2. Available in 8 different heads
- 13. MAGAZINE 1. Stamp made 2. Can carry 10 rounds 3. 5 turn spring 4. High durable metal is used 5. Easily detachable with extended guiding port
- 14. SUPPRESSOR FEATURES 1. Quick deploy attachment method 2. Lock-ring coupler that clicks into ratchet grooves for a secure fit 3. Removable auxiliary muzzle brake for recoil management 4. Made of durable 4130 steel
- 16. THANK YOU