The process of preparing combustible air fuel mixture in the petrol engine is called carburetion.
A device which does this process is called carburetor (Is a mixing device).
hi, I am sujon I just completed graduate at International University of Business Agriculture and Technology in Bangladesh Department of Mechanical Engineering
hi, I am sujon I just completed graduate at International University of Business Agriculture and Technology in Bangladesh Department of Mechanical Engineering
Mech4u presents Lecture Slides
Subject: IC Engine and Gas Turbine
Topics Include :
Carburation, Injection and supercharging
Simple carburettor
Essential Parts of a Carburettor
Introduction, MPFI system.
Injection system of C.I. engines,
Functional Divisions of MPFI System
Introduction of supercharging,
Types Of Super charging
Methods Of Super Charging
a) fuel strainer
b) float chamber
c) main fuel metering and idling nozzles
d) choke and throttle
Different types of MPFI systems are, namely
Port injection
Throttle body injection
D-MPFI system
L-MPFI system
Electronic control system,
Fuel system, and
Air induction system
Air injection systems
Solid injection systems
Individual pump and nozzle system
Unit injector system
Common rail system
Distributor system
Centrifugal type
Root's type
Vane type
Independently driven compressor or blower, usually driven by an electric motor.
Ram effect.
Underpiston supercharging.
Kadenacy system (applied to two stroke engines).
Engine driven compressor or blower.
The presentation is discussing
1-Fuel Cycle when Car starts working
2-Design of fuel system (components)
3-Types of fuel System
4-Carburetor working at different Engine speeds
5-injection working at different Engine speeds
6-Which is preferable of fuel systems (advantage and disadvantage of different system)
hi, I am sujon I just completed graduate at International University of Business Agriculture and Technology in Bangladesh Department of Mechanical Engineering
hi, I am sujon I just completed graduate at International University of Business Agriculture and Technology in Bangladesh Department of Mechanical Engineering
Mech4u presents Lecture Slides
Subject: IC Engine and Gas Turbine
Topics Include :
Carburation, Injection and supercharging
Simple carburettor
Essential Parts of a Carburettor
Introduction, MPFI system.
Injection system of C.I. engines,
Functional Divisions of MPFI System
Introduction of supercharging,
Types Of Super charging
Methods Of Super Charging
a) fuel strainer
b) float chamber
c) main fuel metering and idling nozzles
d) choke and throttle
Different types of MPFI systems are, namely
Port injection
Throttle body injection
D-MPFI system
L-MPFI system
Electronic control system,
Fuel system, and
Air induction system
Air injection systems
Solid injection systems
Individual pump and nozzle system
Unit injector system
Common rail system
Distributor system
Centrifugal type
Root's type
Vane type
Independently driven compressor or blower, usually driven by an electric motor.
Ram effect.
Underpiston supercharging.
Kadenacy system (applied to two stroke engines).
Engine driven compressor or blower.
The presentation is discussing
1-Fuel Cycle when Car starts working
2-Design of fuel system (components)
3-Types of fuel System
4-Carburetor working at different Engine speeds
5-injection working at different Engine speeds
6-Which is preferable of fuel systems (advantage and disadvantage of different system)
Automobile Engineering Unit 2 - Anna universitysuresh n
The 2nd unit of automobile engineering describe about carburetor, types of carburetor, ignition system such as coil ignition, magneto ignition and electric ignition system. And also it describe about supercharger and turbocharger
Automobile Engineering Unit 2 - Anna universitysuresh n
The 2nd unit of automobile engineering describe about carburetor, types of carburetor, ignition system such as coil ignition, magneto ignition and electric ignition system. And also it describe about supercharger and turbocharger
Description of the types of Fuel Dispensers, internal components, and principle of operation.
Measures adopted to ensure best safety and environmentally friendly practices when dispensing fuel at the fuel station such as ensuring low to no nozzle dripping as well as vapor recovery mechanism.
IC Engines Fuel Systems PRINCIPLE AND WORKINGhodmesvce
In a fuel supply system for a spark-ignition internal combustion engine having a blow-in valve for each cylinder for blowing an easily ignitable mixture of a liquid fuel and a combustion gas via a blow-in nozzle into a combustion chamber of the internal combustion engine,
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
2. Carburetion & Carburetor
The process of preparing combustible air fuel
mixture in the petrol engine is called carburetion.
A device which does this process is called
carburetor (Is a mixing device).
The carburetor atomizes the fuel and mixes it with
air in correct proportions according to the engine
operating conditions.
MULUALEM YIMER
2
3. Atomization
Atomization is the process of breaking up a liquid
into tiny particles or droplets.
When a liquid is atomized, the droplets are all
exposed individually to the air.
For this reason, atomization greatly increases
evaporation by increasing the exposed surface area
of the liquid.
MULUALEM YIMER
3
4. Requirements of Carburetors
The requirements of a good carburetor as follows:
Easy engine starting, particularly under low
ambient conditions
Ability to give full power quickly after starting
the engine
Smooth engine operation at various loads
MULUALEM YIMER
4
5. …cont
Quick acceleration of the engine
Developing sufficient power at high engine
speeds
Good fuel economy
Ensuring full torque at low speeds
Simple and compact in construction
MULUALEM YIMER
5
6. Components of carburator
A Simple (or) Elementary Carburetor
It consists of a float chamber, venturi, discharge jet
or main nozzle, choke valve and throttle valve.
Float Chamber (or) Float Bowl:
It consists of a float and needle supply valve.
This system maintains a constant petrol level in the
float chamber.
MULUALEM YIMER
6
7. …cont
Venturi (or) Choke Tube:
Venturi is a tube of decreasing cross section which
reaches a minimum at the throat (restricted section).
During suction stroke air is drawn through the venturi.
The air passing through the venturi increasing in velocity
and the pressure in the venturi throat decreases.
Main Nozzle (or) Discharge Jet:
This is a part that directs fuel from the carburetor bowl to
the throat of the venturi.
MULUALEM YIMER
7
8. …cont
Throttle Valve:
The throttle valve is a round disc located between the
venturi and the engine inlet of the induction system.
The throttle is connected to the accelerator pedal by
a flexible cable.
Depressing the accelerator pedal opens the throttle
valve and permits an increased amount of air fuel
mixture to reach the engine cylinders.
This will increase the power output of the engine and
hence the vehicles speed.
MULUALEM YIMER
8
9. …cont
Choke Valve:
It is a valve which is used for controlling the
amount of air passing to the venturi when starting a
cold engine
MULUALEM YIMER
9
11. Types of Carburetors (reading assignment)
MULUALEM YIMER
11
Based on the direction of air flow
Based on the venturi & depression
Number of Barrel
12. Carburetor Systems
The fixed venturi carburetor has six systems and
several devices that provide the correct air-fuel
mixture for different operating conditions. These
include:
1. Float System
2. Idle and Low speed System
3. Main-Metering System
4. Power System
5. Accelerator Pump System
6. Choke System
MULUALEM YIMER
12
13. …cont
MULUALEM YIMER
13
1. Float System
The float system acts as a fuel reservoir to meet
engine demand.
The float is pivoted on a pin in the float boss. It rises and
falls with the fuel level in the float bowl. The small metal
tang integrated in the plastic float supports the
float valve, aka float needle.
As the fuel in the float bowl rises, the float valve is
pushed into the valve seat, until it's high enough to shut
off the fuel flow to the bowl.
The level in the bowl drops lowering the float which pulls
the float valve from it's seat, and fills again.
14. …cont
MULUALEM YIMER
14
2. Idle and Low Speed System
a. Idle System
When the throttle valve is closed or only slightly open, only a
small amount of air can pass through the air horn. With low
air speed, there is very little vacuum in the venture. No fuel
will feed from the fuel nozzle. To supply fuel during idle, an
idling system is built into the carburetor. This system has an
opening in the side of the carburetor below the throttle valve.
This hole is called idle port.
The port is connected by a passage to the float bowl or float
chamber. In addition to the idle port, there is an idle-mixture
screw located behind the idle port to control the amount of
mixture discharge through it.
15. …cont
MULUALEM YIMER
15
b. Low Speed System
If the throttle valve is open just a little for low speed,
the edge of the throttle valve moves past the idle
port. More air can flow past the throttle valve now,
reducing the vacuum in the intake manifold. So less
fuel flows from the idle port. However, the low
speed port now comes into action. The throttle valve
has moved past and above the low speed port.
16. …cont
MULUALEM YIMER
16
The vacuum in the intake manifold can act on the
low speed port as well as on the idle port. Both ports
discharge fuel to maintain required amount of air-
fuel mixture for low speed.
17. …cont
MULUALEM YIMER
17
3. Main-Metering System
If the throttle valve is opened farther, more air will
flow through. This means that there will be less
vacuum in the intake manifold. As a result, the idle
and low speed ports stop discharging fuel.
However, with more air flow, there is a vacuum in
the venturi. This causes the main nozzle or discharge
jet to discharge fuel. Therefore, fuel gets mixed with
the air passing through.
18. …cont
MULUALEM YIMER
18
4. Power System
When a driver wants full power, the accelerator
pedal is pushed to the floor (i.e. to the maximum
position). This causes the throttle valve to open wide.
Another system in the carburetor comes into action
to additional fuel. This system is called power
system. It can be a piston type or metering rod type.
19. …cont
MULUALEM YIMER
19
5, Acceleration Pump System
There is another operating condition that needs a rich
mixture. This condition occurs when the accelerator
pedal is pushed down suddenly to increase the
speed.
When the throttle valve is suddenly opened, although the
amount of air drawn into the carburetor immediately
increases, more gasoline is not immediately delivered by
the main nozzle (because gasoline is heavier than air).
For this reason, the air-fuel mixture will become
temporarily lean during acceleration unless this is
prevented by the implementation of an acceleration
circuit.
20. cont
MULUALEM YIMER
20
When the accelerator pedal is stepped on, the
gasoline in the pump cylinder is put under pressure
by the pump plunger. This causes the gasoline to
push up outlet steel ball and to be sprayed into
venturi by the pump jet.
When the accelerator pedal is released, the pump
plunger rises, and the outlet steel ball blocks the
outlet. The inlet steel ball then unblocks the inlet,
allowing gasoline to be drawn up into the pump
cylinder from the float chamber.
21. cont
MULUALEM YIMER
21
6. CHOKE SYSTEM
When the engine is cold, the fuel tends to condense into
large drops in the manifold, rather than vaporizing.
By supplying a richer mixture (8:1 to 9:1), there will be
enough vapor to assure complete combustion.
The carburetor is fitted with a choke system to provide
this richer mixture.
The choke system provides a very rich mixture to start
the engine and to make the mixture less rich gradually,
as the engine reaches operating temperature. The two
types of choke systems are the manual and automatic