Atmeag328 bootloading
•Download as PPTX, PDF•
0 likes•181 views
This slides describes the process involved in programming Arduino Bootloader on Atmega328 controller. A standalone Atmega328 chip can be programmed to function as an Arduino using this method. Can also be used to reflash bootloader on existing arduino.
Report
Share
Report
Share
Recommended
ATmega328p
atmega ,Here you can get the ATmega328p Microcontroller pin configuration how to use , what is the functionality difference with Arduino, about microchip and Atmel.
ATMEGA 328
The Atmega328 is a low-power 8-bit microcontroller based on AVR architecture that can achieve throughputs of 1 MIPS per MHz. It has 32KB of flash memory, 1KB of EEPROM, 2KB of SRAM, 3 I/O ports, 32 general purpose registers, and a 16-bit timer/counter that can generate delays of up to 262ms when running on a 16MHz oscillator.
Arduino maze solving robot
Arduino maze solving robot
1-Arduio uno
2-Dc motor
3-Ultrasonic Sensor
4-Servo motor
5-L293D Driver ic
MPU6050 IMU with Arduino
Class materials for teaching the use of the MPU-6050 with an Arduino Uno. These materials were originally used in Designathon 2016.
They were only created in a few hours notice so pardon my lower quality of this presentation compared to my other work.
The code is available here. https://github.com/SustainableLivingLab/imu-mpu6050-usage
I2 c and mpu6050 basics
basics of I2C communication, and how to interface MPU6050 sensor with AVR microcontroller using I2C communication protocol
Arduino uno
The document describes the major components of an Arduino Uno board. It explains that the board contains a microcontroller, analog and digital pins that can be used for inputs or outputs, a USB connector for programming and power, a power port for an external power source, and LEDs and chips to facilitate communication. The microcontroller is an Atmega328P that contains memory and a CPU to run loaded programs. The board converts sensor signals to digital values and allows control of connected components through its pins.
MPU-6050_RF24L01
This document provides a tutorial on using an Arduino board with an MPU-6050 inertial measurement unit (IMU) sensor and nRF24L01 wireless communication module. It describes the history and software of Arduino, details of IMUs and the specific MPU-6050 sensor, schematics and code for reading data from the MPU-6050 over I2C, and schematics and code for wireless data transmission with the nRF24L01 module. The goal is to integrate these components to create a functioning motion sensing and wireless data transmission project using the Arduino platform.
Introduction to Arduino Webinar
A webinar presented to the members of EUROAVIA Patras as an introduction to the Arduino microcontroller. It goes over the basics of the controllers features and capabilities, and guides the participant through their first steps of programming an Arduino using C++.
Recommended
ATmega328p
atmega ,Here you can get the ATmega328p Microcontroller pin configuration how to use , what is the functionality difference with Arduino, about microchip and Atmel.
ATMEGA 328
The Atmega328 is a low-power 8-bit microcontroller based on AVR architecture that can achieve throughputs of 1 MIPS per MHz. It has 32KB of flash memory, 1KB of EEPROM, 2KB of SRAM, 3 I/O ports, 32 general purpose registers, and a 16-bit timer/counter that can generate delays of up to 262ms when running on a 16MHz oscillator.
Arduino maze solving robot
Arduino maze solving robot
1-Arduio uno
2-Dc motor
3-Ultrasonic Sensor
4-Servo motor
5-L293D Driver ic
MPU6050 IMU with Arduino
Class materials for teaching the use of the MPU-6050 with an Arduino Uno. These materials were originally used in Designathon 2016.
They were only created in a few hours notice so pardon my lower quality of this presentation compared to my other work.
The code is available here. https://github.com/SustainableLivingLab/imu-mpu6050-usage
I2 c and mpu6050 basics
basics of I2C communication, and how to interface MPU6050 sensor with AVR microcontroller using I2C communication protocol
Arduino uno
The document describes the major components of an Arduino Uno board. It explains that the board contains a microcontroller, analog and digital pins that can be used for inputs or outputs, a USB connector for programming and power, a power port for an external power source, and LEDs and chips to facilitate communication. The microcontroller is an Atmega328P that contains memory and a CPU to run loaded programs. The board converts sensor signals to digital values and allows control of connected components through its pins.
MPU-6050_RF24L01
This document provides a tutorial on using an Arduino board with an MPU-6050 inertial measurement unit (IMU) sensor and nRF24L01 wireless communication module. It describes the history and software of Arduino, details of IMUs and the specific MPU-6050 sensor, schematics and code for reading data from the MPU-6050 over I2C, and schematics and code for wireless data transmission with the nRF24L01 module. The goal is to integrate these components to create a functioning motion sensing and wireless data transmission project using the Arduino platform.
Introduction to Arduino Webinar
A webinar presented to the members of EUROAVIA Patras as an introduction to the Arduino microcontroller. It goes over the basics of the controllers features and capabilities, and guides the participant through their first steps of programming an Arduino using C++.
Hardware Hacking
The document provides an overview of the Arduino microcontroller, including its specifications such as a 16MHz clock speed, 2KB SRAM, 32KB flash memory, and 13 digital input/outputs. It notes that the Arduino runs on all operating systems, has a basic IDE for compiling, uploading and debugging code, and is perfect for beginners interested in hardware hacking. However, more advanced users may find the IDE limited.
Atmega 32
Atmega 32LITS IT Ltd,LASRC.SPACE,SAWDAGOR BD,FREELANCE BD,iREV,BD LAW ACADEMY,SMART AVI,HEA,HFSAC LTD.
This document describes the features and specifications of the Atmel AVR ATmega32 8-bit microcontroller. It includes details about the microcontroller's architecture such as its instruction set, registers, memory, and peripherals. The document also provides information on the microcontroller's packaging, pinout, power consumption, and development tools support.Capabilities of Arduino (including Due)
This document summarizes the capabilities and specifications of various Arduino boards. It describes the different types of Arduino boards including the Uno, Leonardo, Due, Mega, Arduino BT, LilyPad, Arduino Pro, and ADK. It provides details on the microcontrollers, operating voltages, memory, and input/output pins of the Uno/Leonardo and Due. It also outlines the pin mappings, external interfaces, ways to interface with external boards, and examples of projects the author has implemented with Arduino boards.
Microcontroller kit
Microcontroller kit contains AVR Controller Board, AVR/8051 USB Programmer, 16X2 LCD, EEPROM 24C08 (IC), Temperature Sensor, F/F Jumper Wire etc.
Buy arduino locally by Robomart
This ppt is about Arduino Uno Board, its features and applications in real life. This ppt is by Robomart. Robomart is an organization who is providing products in these kind of categories and in other related categories also. Here are the product link for Arduino Board at Robomart-
URL: https://www.robomart.com/arduino-uno-online-india
DIY UNO Play Breadboard ATMEGA328P with FT232 Breakout Board
This document describes a DIY UNO Play Breadboard that uses an ATmega328p microcontroller. It includes an FT232 breakout board to program the ATmega328p via USB without an onboard USB interface. The breadboard has 14 digital I/O pins, 6 analog inputs, and 6 PWM outputs. An example Arduino code is provided to blink 4 LEDs connected to different digital pins. The breadboard allows prototyping with the common ATmega328p in a similar way to an Arduino UNO board.
Avr microcontroller
An embedded system is a combination of hardware and software designed for a specific task. It contains a microcontroller or microprocessor that executes programmed instructions. A microcontroller contains a CPU, memory, and programmable input/output peripherals on a single chip. The Atmega8 is an 8-bit AVR microcontroller developed by Atmel with 8KB of flash memory. It has ports that can be configured as inputs or outputs using data direction registers to interface with external devices like LEDs for blinking. Programming the microcontroller involves writing code, compiling it, and flashing the hex file onto the chip.
Arduino Microcontroller
In these slides we have disused about AVR Micro controllers, AVR Architecture and Program Memory Map and Packages.
A tmega16A Microcontroller Data Sheet
The ATmega16A is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC
architecture. By executing powerful instructions in a single clock cycle, the ATmega16A
achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize
power consumption versus processing speed.
Arduino UNO R3 Projects - Robomart
Arduino uno r3 is easy to utilize board which you can use to make different tasks. Various Arduino uno r3 is available in market. We cater online facilities for buy arduino uno starter kit, arduino uno r3 projects india from Robomart. https://goo.gl/ASLbok
Untitled 1
1. The document discusses configuring the fuse bytes and clock settings of a microcontroller before first use.
2. It provides examples of commands to program the high and low fuse bytes for a 1MHz internal clock or 16MHz external crystal on an ATmega16 microcontroller.
3. Setting the wrong fuse values could render the microcontroller unusable.
Meta88full
This document summarizes the features and specifications of an 8-bit Atmel microcontroller. It has advanced RISC architecture with powerful instructions that execute in single clock cycles. It features in-system self-programmable flash memory from 4-32KB, EEPROM from 256-1KB, and internal SRAM from 512-2KB. It has various peripheral features including timers, PWM, ADC, serial interfaces, and more. It is available in PDIP, TQFP, and other packages and operates from 1.8-5.5V over commercial and industrial temperature ranges.
Arduino atmega328
This document provides an unofficial pinout diagram of the ATMEGA328 microcontroller found on Arduino boards. It labels each pin on the microcontroller chip and indicates the corresponding Arduino digital pin number, as well as the pin's functions such as power, ground, analog input, pulse-width modulation (PWM) output, serial communication, and interrupts. The diagram is intended to help users understand how the microcontroller pins map to the Arduino pin headers.
A tmega8 basics
The document provides an overview of the ATmega8 microcontroller, which is an 8-bit microcontroller based on the AVR RISC architecture. It can achieve throughput of up to 1 MIPS per MHz. The ATmega8 uses a Harvard architecture that separates program and data memories and buses. It has features such as 8K bytes of flash memory, 512 bytes of EEPROM, 1K byte of RAM, and three 8-bit I/O ports (Ports B, C, and D).
Ii avr-basics(1)
The Atmega8 microcontroller has a Harvard architecture with separate program and data memories. It features 8K of flash memory, 512 bytes of EEPROM, and 1K of SRAM. It has various digital and analog I/O ports that can be configured for input, output, and alternate functions. The Atmega8 uses an internal or external clock and has features like timers, interrupts, and PWM that make it suitable for biomedical applications.
Arduino IDE
The document discusses the Arduino integrated development environment and essential functions. It explains that the void setup() function is used to declare pin modes and that void loop() is used for repetitive tasks. It also describes functions for configuring pin modes as inputs or outputs with pinMode(), reading digital and analog pin values with digitalRead(), analogRead(), and writing values to pins with digitalWrite() and analogWrite().
ATmega32
This document discusses the ATmega32 microcontroller. It provides details about the microcontroller, including that it is a small computer on a single integrated circuit containing a processor core, memory, and programmable I/O. It notes features of the ATmega32 such as its processing power, memory, programming capabilities, and peripherals. Example code is provided to control a stepper motor using the ATmega32 by setting the data direction registers and outputting different values to PORTB to rotate the motor in both directions.
Lcd with arduino uno
LCD Keypad shield for Arduino includes a 16x2 LCD module and a 5 push button keypad for menu selection and user interface programming .All types of arduino boards,lcd with arduino board,diy robotics kits are available on robomart in cheap price and best quality.the link is given below https://www.robomart.com/robomart-arduino-uno-r3-1602-lcd-starter-kit-with-17-basic-arduino-projects
VCCDP
This document summarizes work performed on a software and hardware project. It implemented speech recognition using an Easy VR module to control hardware with Arduino Uno and ULN 2803. The Arduino Uno is a microcontroller board that can be programmed with the Arduino software and contains everything needed to support the microcontroller. Easy VR is a speech recognition module that can be trained to recognize commands in any language. ULN 2803 contains eight transistors that can interface low logic circuits to drive loads like lamps or relays. The tasks achieved included software simulation, coding, and hardware implementation of the speech recognition system.
Getting started with arduino workshop
Slides from my "Getting started with Arduino" workshop. Details at
http://hardwarefun.com/news/slides-from-getting-started-with-arduino-workshop
Arduino-101-Workshop (Introduction to Arduino and motor driver)
A comprehensive workshop power point presentation on Arduino basics focusing RC car. It's basically an one day workshop presentation used for the new students in Independent University Bangladesh to encourage them to participate in various hardware based projects, competition etc.
ATmega 16
The document provides an overview of AVR microcontrollers, including their history, architecture, types, and common peripherals. AVR microcontrollers were developed by Atmel beginning in 1996 and use on-chip flash memory for program storage. They are available in three categories - Tiny, Mega, and Xmega - with the Mega being the most popular. The AVR architecture employs 32 general purpose registers, static RAM, EEPROM, flash memory, timers/counters, and I/O ports. Common peripherals that can be interfaced include LEDs, 7-segment displays, switches, DC motors, and LCDs. Timers and interrupts are also discussed.
More Related Content
What's hot
Hardware Hacking
The document provides an overview of the Arduino microcontroller, including its specifications such as a 16MHz clock speed, 2KB SRAM, 32KB flash memory, and 13 digital input/outputs. It notes that the Arduino runs on all operating systems, has a basic IDE for compiling, uploading and debugging code, and is perfect for beginners interested in hardware hacking. However, more advanced users may find the IDE limited.
Atmega 32
Atmega 32LITS IT Ltd,LASRC.SPACE,SAWDAGOR BD,FREELANCE BD,iREV,BD LAW ACADEMY,SMART AVI,HEA,HFSAC LTD.
This document describes the features and specifications of the Atmel AVR ATmega32 8-bit microcontroller. It includes details about the microcontroller's architecture such as its instruction set, registers, memory, and peripherals. The document also provides information on the microcontroller's packaging, pinout, power consumption, and development tools support.Capabilities of Arduino (including Due)
This document summarizes the capabilities and specifications of various Arduino boards. It describes the different types of Arduino boards including the Uno, Leonardo, Due, Mega, Arduino BT, LilyPad, Arduino Pro, and ADK. It provides details on the microcontrollers, operating voltages, memory, and input/output pins of the Uno/Leonardo and Due. It also outlines the pin mappings, external interfaces, ways to interface with external boards, and examples of projects the author has implemented with Arduino boards.
Microcontroller kit
Microcontroller kit contains AVR Controller Board, AVR/8051 USB Programmer, 16X2 LCD, EEPROM 24C08 (IC), Temperature Sensor, F/F Jumper Wire etc.
Buy arduino locally by Robomart
This ppt is about Arduino Uno Board, its features and applications in real life. This ppt is by Robomart. Robomart is an organization who is providing products in these kind of categories and in other related categories also. Here are the product link for Arduino Board at Robomart-
URL: https://www.robomart.com/arduino-uno-online-india
DIY UNO Play Breadboard ATMEGA328P with FT232 Breakout Board
This document describes a DIY UNO Play Breadboard that uses an ATmega328p microcontroller. It includes an FT232 breakout board to program the ATmega328p via USB without an onboard USB interface. The breadboard has 14 digital I/O pins, 6 analog inputs, and 6 PWM outputs. An example Arduino code is provided to blink 4 LEDs connected to different digital pins. The breadboard allows prototyping with the common ATmega328p in a similar way to an Arduino UNO board.
Avr microcontroller
An embedded system is a combination of hardware and software designed for a specific task. It contains a microcontroller or microprocessor that executes programmed instructions. A microcontroller contains a CPU, memory, and programmable input/output peripherals on a single chip. The Atmega8 is an 8-bit AVR microcontroller developed by Atmel with 8KB of flash memory. It has ports that can be configured as inputs or outputs using data direction registers to interface with external devices like LEDs for blinking. Programming the microcontroller involves writing code, compiling it, and flashing the hex file onto the chip.
Arduino Microcontroller
In these slides we have disused about AVR Micro controllers, AVR Architecture and Program Memory Map and Packages.
A tmega16A Microcontroller Data Sheet
The ATmega16A is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC
architecture. By executing powerful instructions in a single clock cycle, the ATmega16A
achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize
power consumption versus processing speed.
Arduino UNO R3 Projects - Robomart
Arduino uno r3 is easy to utilize board which you can use to make different tasks. Various Arduino uno r3 is available in market. We cater online facilities for buy arduino uno starter kit, arduino uno r3 projects india from Robomart. https://goo.gl/ASLbok
Untitled 1
1. The document discusses configuring the fuse bytes and clock settings of a microcontroller before first use.
2. It provides examples of commands to program the high and low fuse bytes for a 1MHz internal clock or 16MHz external crystal on an ATmega16 microcontroller.
3. Setting the wrong fuse values could render the microcontroller unusable.
Meta88full
This document summarizes the features and specifications of an 8-bit Atmel microcontroller. It has advanced RISC architecture with powerful instructions that execute in single clock cycles. It features in-system self-programmable flash memory from 4-32KB, EEPROM from 256-1KB, and internal SRAM from 512-2KB. It has various peripheral features including timers, PWM, ADC, serial interfaces, and more. It is available in PDIP, TQFP, and other packages and operates from 1.8-5.5V over commercial and industrial temperature ranges.
Arduino atmega328
This document provides an unofficial pinout diagram of the ATMEGA328 microcontroller found on Arduino boards. It labels each pin on the microcontroller chip and indicates the corresponding Arduino digital pin number, as well as the pin's functions such as power, ground, analog input, pulse-width modulation (PWM) output, serial communication, and interrupts. The diagram is intended to help users understand how the microcontroller pins map to the Arduino pin headers.
A tmega8 basics
The document provides an overview of the ATmega8 microcontroller, which is an 8-bit microcontroller based on the AVR RISC architecture. It can achieve throughput of up to 1 MIPS per MHz. The ATmega8 uses a Harvard architecture that separates program and data memories and buses. It has features such as 8K bytes of flash memory, 512 bytes of EEPROM, 1K byte of RAM, and three 8-bit I/O ports (Ports B, C, and D).
Ii avr-basics(1)
The Atmega8 microcontroller has a Harvard architecture with separate program and data memories. It features 8K of flash memory, 512 bytes of EEPROM, and 1K of SRAM. It has various digital and analog I/O ports that can be configured for input, output, and alternate functions. The Atmega8 uses an internal or external clock and has features like timers, interrupts, and PWM that make it suitable for biomedical applications.
Arduino IDE
The document discusses the Arduino integrated development environment and essential functions. It explains that the void setup() function is used to declare pin modes and that void loop() is used for repetitive tasks. It also describes functions for configuring pin modes as inputs or outputs with pinMode(), reading digital and analog pin values with digitalRead(), analogRead(), and writing values to pins with digitalWrite() and analogWrite().
ATmega32
This document discusses the ATmega32 microcontroller. It provides details about the microcontroller, including that it is a small computer on a single integrated circuit containing a processor core, memory, and programmable I/O. It notes features of the ATmega32 such as its processing power, memory, programming capabilities, and peripherals. Example code is provided to control a stepper motor using the ATmega32 by setting the data direction registers and outputting different values to PORTB to rotate the motor in both directions.
Lcd with arduino uno
LCD Keypad shield for Arduino includes a 16x2 LCD module and a 5 push button keypad for menu selection and user interface programming .All types of arduino boards,lcd with arduino board,diy robotics kits are available on robomart in cheap price and best quality.the link is given below https://www.robomart.com/robomart-arduino-uno-r3-1602-lcd-starter-kit-with-17-basic-arduino-projects
VCCDP
This document summarizes work performed on a software and hardware project. It implemented speech recognition using an Easy VR module to control hardware with Arduino Uno and ULN 2803. The Arduino Uno is a microcontroller board that can be programmed with the Arduino software and contains everything needed to support the microcontroller. Easy VR is a speech recognition module that can be trained to recognize commands in any language. ULN 2803 contains eight transistors that can interface low logic circuits to drive loads like lamps or relays. The tasks achieved included software simulation, coding, and hardware implementation of the speech recognition system.
Getting started with arduino workshop
Slides from my "Getting started with Arduino" workshop. Details at
http://hardwarefun.com/news/slides-from-getting-started-with-arduino-workshop
What's hot (20)
DIY UNO Play Breadboard ATMEGA328P with FT232 Breakout Board
DIY UNO Play Breadboard ATMEGA328P with FT232 Breakout Board
Similar to Atmeag328 bootloading
Arduino-101-Workshop (Introduction to Arduino and motor driver)
A comprehensive workshop power point presentation on Arduino basics focusing RC car. It's basically an one day workshop presentation used for the new students in Independent University Bangladesh to encourage them to participate in various hardware based projects, competition etc.
ATmega 16
The document provides an overview of AVR microcontrollers, including their history, architecture, types, and common peripherals. AVR microcontrollers were developed by Atmel beginning in 1996 and use on-chip flash memory for program storage. They are available in three categories - Tiny, Mega, and Xmega - with the Mega being the most popular. The AVR architecture employs 32 general purpose registers, static RAM, EEPROM, flash memory, timers/counters, and I/O ports. Common peripherals that can be interfaced include LEDs, 7-segment displays, switches, DC motors, and LCDs. Timers and interrupts are also discussed.
Lab2ppt
This document provides an overview of a lab on using Arduino. The schedule includes lectures on Arduino, installing drivers, and using an ultrasonic sensor. It defines Arduino as a hardware and software platform and describes the Arduino UNO board. It explains how to install the Arduino IDE and write programs with a setup and loop structure. Lab 1 demonstrates controlling an LED, and Lab 2 uses an ultrasonic sensor to measure distance. Lab 3 builds a minimum system using just an AVR chip.
IOT ARDUINO UNO.pptx
The document discusses the Arduino UNO board. It describes the components of the board including the ATmega328 microcontroller and digital and analog pins. It explains how to program the board using the Arduino IDE and connect it to a computer via USB. The steps to get started with the board are outlined, including installing drivers and uploading code to control digital pins using functions like pinMode(), digitalWrite(), and delay().
Different Arduino Boards
The document discusses several Arduino boards - Arduino Uno, Mega, Nano, Mini, Micro and Lilypad. Arduino is an open-source prototyping platform that allows users to create interactive electronic objects by providing hardware and software. The boards can read inputs from sensors and turn them into outputs to control motors, LEDs or publish data online. Each board is based on a microcontroller and has digital and analog pins, memory and other specifications outlined in the document.
Arduino01.pptx
This document introduces Arduino, an open-source electronics platform consisting of a programmable circuit board and software IDE. Arduino boards can be programmed using a USB cable without additional hardware. The document describes several types of Arduino boards including the Arduino Uno, Micro, and Mega. It provides details on the microcontrollers, memory, input/output pins of each board type.
digital clock atmega16
This document describes an embedded systems project involving an Atmega16 microcontroller to create a stopwatch. It includes sections on the microcontroller, analog to digital conversion, timers, interfacing with an LCD display, and the stopwatch program code. The program uses buttons on ports A and D to start, stop, reset, and increment the stopwatch which displays hours, minutes, seconds, and tenths of seconds on the LCD. The document provides explanations of the microcontroller features and registers used in the project.
5. Features of the LPC214X Family.pptx
The LPC214X family contains ARM7TDMI-S microcontrollers with features including 8-64KB RAM, 32-512KB flash memory, USB 2.0, 10-bit ADCs, 10-bit DAC, timers, RTC, serial interfaces, external interrupts, 60MHz clock, and power saving modes. It has a 32-bit ARM instruction set and 16-bit Thumb set. The microcontrollers come in an LQFP64 package and pins include ports, reset, oscillators, power, and analog references.
Industrial training report of embedded system and robotics
It consists of all the necessary and important information regarding EMBEDDED SYSTEM AND ROBOTICS functionality and implementation
Arduino uno
The Arduino Uno is a microcontroller board based on the ATmega328P chip. It has 32KB of flash memory, 2KB of SRAM, and 1KB of EEPROM. The board has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter to get started.
Contactless digital tachometer using microcontroller
This document describes a contactless digital tachometer that uses an Arduino microcontroller, infrared sensor, and LCD display. The tachometer counts the number of rotations of a motor shaft using an IR transmitter and receiver without direct contact. It displays the revolutions per minute (RPM) measurement on an LCD screen. The Arduino microcontroller implements the RPM calculation from the IR sensor pulses and controls the LCD output. The tachometer provides contactless RPM measurement for motors in difficult to reach locations.
Embedded system application
The document provides information about interfacing an RF transmitter module with an Arduino board. It includes the technical specifications of the RF transmitter and receiver modules. The circuit diagram shows how to connect the RF transmitter module to an Arduino board. It also includes the Arduino code for the RF transmitter to send digital signals and the RF receiver code to receive the signals and control an LED accordingly.
Arduino intro.pptx
This document provides an introduction to Arduino, including:
- What Arduino is and its uses for artists, students, and hobbyists.
- That Arduino is a microcontroller board based on the ATmega328 chip, which has 32KB of flash memory, 2KB of SRAM, and 1KB of EEPROM.
- Different types of Arduino boards like Uno, Mega, LilyPad, and DIY boards.
- How to code for Arduino using the Arduino IDE software, by selecting the correct board and port and uploading programs.
- Key concepts like digital and analog I/O, if-statements, and serial communication.
Ardui no
This document provides an overview of microcontrollers and the Arduino platform. It discusses what a microcontroller is and some common types. It then introduces Arduino as an open-source prototyping platform using easy hardware and software. Several Arduino boards are described and the ATmega328p microcontroller chip is specified. The document outlines how to download the Arduino software and write programs. It provides examples of basic Arduino projects like blinking LEDs, reading sensors, and creating sounds.
arduinoworkshop-160204051621.pdf
This document provides an overview of microcontrollers and the Arduino platform. It discusses what a microcontroller is and some common types. It then introduces Arduino as an open-source prototyping platform using easy hardware and software. Several Arduino boards are described and the ATmega328p microcontroller chip is specified. The document outlines how to download the Arduino software and write programs. It provides examples of basic Arduino projects like blinking LEDs, reading sensors, and creating sounds.
Atmega32
This document describes the features and specifications of the ATmega32 8-bit microcontroller. It includes details on the microcontroller's architecture such as its AVR CPU core, 32K bytes of flash memory, 1024 bytes of EEPROM, 2K bytes of SRAM, and various peripherals. It also provides information on the microcontroller's pins and packages, operating voltages, speed grades, and power consumption. The document is intended to provide an overview of the capabilities and technical specifications of the ATmega32 microcontroller.
SMARTPHONE CONROL ROBOTIC CAR.pptx
This document describes a smartphone-controlled robotic car project using an Arduino Uno microcontroller board. The key components are the Arduino Uno, a Bluetooth module to enable wireless communication between a smartphone app and the Arduino, and an L293D motor driver IC to control the speed and direction of two motors to drive the car. An Android app allows gestural control of the car in real-time over Bluetooth from a phone.
Color Recognition with Matlab Image Processing and Matlab Interfacing with Ar...
This document discusses using Matlab and Arduino to recognize colors in an image. It describes hardware including an Arduino Uno microcontroller and LED lights. Software used includes the Arduino IDE, Matlab R2017a, and Fritzing. The process takes a picture, separates it into red, green, and blue layers, binarizes the layers, compares the areas, and sends signals to light the corresponding LED on the Arduino. Matlab code is provided to process the image layers and Arduino code controls the LEDs. Schematics illustrate the serial communication between the systems.
Arduino and its hw architecture
Arduino is an open-source microcontroller board and development environment that can sense the environment using inputs from sensors and affect its surroundings by controlling lights, motors, and other actuators. The document discusses the hardware architecture of Arduino, including the different types of Arduino boards, the components of an Arduino Uno board, and the architecture of the Atmega328 microcontroller chip used in Arduino boards. It describes the microcontroller's memory types including flash memory, SRAM, and EEPROM.
Embedded system design using arduino
The slide provides the comparative analysis of 8086, 8051 and other microprocessors, and why Arduino for embedded system design.
Similar to Atmeag328 bootloading (20)
Arduino-101-Workshop (Introduction to Arduino and motor driver)
Arduino-101-Workshop (Introduction to Arduino and motor driver)
Industrial training report of embedded system and robotics
Industrial training report of embedded system and robotics
Contactless digital tachometer using microcontroller
Contactless digital tachometer using microcontroller
Color Recognition with Matlab Image Processing and Matlab Interfacing with Ar...
Color Recognition with Matlab Image Processing and Matlab Interfacing with Ar...
Recently uploaded
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
cnn.pptx Convolutional neural network used for image classication
Convolutional Neural Network used for image classification
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Recently uploaded (20)
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Introduction to AI Safety (public presentation).pptx
Introduction to AI Safety (public presentation).pptx
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
cnn.pptx Convolutional neural network used for image classication
cnn.pptx Convolutional neural network used for image classication
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Atmeag328 bootloading
- 2. About ATMEGA 328 Atmega328 is the micro controller used on Arduino boards. • Specs • 28-pin AVR Microcontroller • Flash Program Memory: 32 kbytes • EEPROM Data Memory: 1 kbytes • SRAM Data Memory: 2 kbytes • I/O Pins: 23 • Timers: Two 8-bit / One 16-bit • A/D Converter: 10-bit Six Channel • PWM: Six Channels • RTC: Yes with Separate Oscillator • MSSP: SPI and I²C Master and Slave Support • USART: Yes • External Oscillator: up to 20MHz
- 4. What is Arduino Bootloader • The Bootloader is the program that runs when you power on the Atmega controller. • It waits for the Arduino software on your computer to send it a new program, which it then writes to the flash memory on the Atmega controller. • Normally, we need to use special device (ISP programmer) to program the Atmega chip using the SPI programming interface. Bootloader allows us to program the Atmega chip using the Arduino software and the USB cable. • The Bootloader is written to the Boot Flash section as described below.
- 5. Burning the Bootloader • Pre-requisite setup • Upload ArduinoISP sketch on the Arduino Uno board, this will turn Arduino board into an ISP programmer • Select “Arduino as ISP” from the Tools->Programmer menu. • Collect Components • 1 16 Mhz Crystal • 1 10K resistor • 2 22pf capacitors • Arduino Uno board
- 6. Breadboard Connections • Connect X1 and X2 to crystal • Connect 22PF capacitors to the two ends of crystal and other ends to ground. • Connect RESET to VCC via 10K resistor as pull up resistor. • Connect PIN 10 of the Arduino board to RESET pin of ATMEGA. • Connect pin 11,12,13 of the Arduino to the ATMEGA 11,12,13(MOSI, MISO, SCK) pins. You can also connect these pins from ICSP header specially if not using Arduino Uno. • Connect 5V and GND pins to the Breadboard 5V and GND. 1. MISO 3. SCK 5. RESET 2. VCC 4. MOSI 6. GND
- 7. Burn it!! • Select "Arduino Duemilanove or Nano and Processor as Atmega328 from the Tools > Board menu. • Run Tools > Burn Bootloader • If there are any failures re-check the connections. If all goes well Arduino IDE will show a successful message.
- 8. References • http://www.electronics-lab.com/project/arduinoatmega328p-on-a-breadboard/ • https://www.arduino.cc/en/Hacking/Bootloader?from=Tutorial.Bootloader • https://www.arduino.cc/en/Hacking/MiniBootloader • https://www.arduino.cc/en/Tutorial/ArduinoISP