Assignment - Building Services 1
•
1 like•942 views
This document provides an assignment brief for a group project on building services systems. Students will be assigned to one of 10 topics related to sustainable building services and prepare a documentation report and presentation. The report must include an introduction, description of the installation process and management system, advantages and disadvantages, a case study analysis, potential problems and recommendations. Students will be assessed based on their understanding of the brief, quality of documentation, richness of content, clear communication, and appropriate use of drawings/photos. The goal is to extend students' knowledge of building services technology and applications in the construction industry.
Report
Share
Report
Share
Download to read offline
![SCHOOL OF ARCHITECTURE. BUILDING. DESIGN
Centre for Modern Architecture Studies in Southeast Asia
Bachelor of Quantity Surveying (Honours)
BUILDING SERVICES 1 [BLD 60403]
____________________________________________________________
Assignment (Group Project)
Submission date: Week 12 (21st June 2016)
__________________________________________________________________
Assessment brief
Objectives
• To extend and refine knowledge relating to the building services technology and the management system.
• To develop students understanding of course materials and the current application in construction industry.
• Developing higher-order intellectual skills – evaluating skills and critical thinking skills
• Encourage knowledge sharing about subject taught
Learning Outcomes
Upon successful completion of the subject, students will be able to:
• Understand and explain relevant information related to the selected case study.
• Identify the application, system, installation, process, benefits, problems and anything relevant to support the
documentation.
Project:
• This project is a study on building services system with the selected topics such as ventilation system,
telecommunication, storm water system, cold water supply and hot water supply.
• Students are required to carry out own research study based on given topic supported by at least one case
study either in local or oversea.
In group of students, you are required to prepare one of the topics within the existing topic below:
1. Sustainable Wastewater Treatment
2. Energy Efficient Ventilation System
3. Building Integration of Solar Energy](https://image.slidesharecdn.com/bs1assignment-march2016-160706071031/85/Assignment-Building-Services-1-1-320.jpg)
Recommended
Bs1 assignment semester 2016 august
This document provides an assignment brief for a group project on building services systems. Students will be assigned to one of 10 topics and required to research and document the selected topic. They must explain the application, installation process, benefits, problems and include a case study. The 5,500 word report must follow a specified format and will be assessed based on demonstrated understanding, quality of documentation, richness of content, clear communication and appropriate use of drawings/photographs. Upon completion, students will understand and explain relevant information, identify applications and installations, and make recommendations for future improvements related to their assigned topic.
Storm water management
1. The document outlines a group project for students to study and report on various building services systems.
2. Students will be assigned to one of 10 topics and must prepare a 3500+ word report and visual documentation explaining their selected topic, including the application, installation process, benefits, problems, and recommendations.
3. Reports must follow a specified format and will be evaluated based on demonstrated understanding, quality of documentation, content richness, and clear communication.
Group project bs1
1. The document provides details for a group project assignment on building services systems for a Quantity Surveying course.
2. Students will be assigned to groups of up to 6 people and each group will analyze one of 10 topics related to sustainable building services.
3. The final deliverables are an A4 bound report of at least 3500 words analyzing the assigned topic, including visuals, installation processes, advantages/disadvantages, a case study, and recommendations. Groups will also do a 7-10 minute presentation on their topic.
Ash edu 695 week 2 assignment 21st century skills and standards new
Ash edu 695 new,Ash edu 695 new,Ash edu 695 new complete course,Ash edu 695 new entire course,Ash edu 695 new week 1,Ash edu 695 new week2,Ash edu 695 new week 3,Ash edu 695 new week 4,Ash edu 695 new week 5,Ash edu 695 new tutorials, Ash edu 695 newassignments, Ash edu 695 newhelp,Ash edu 695 new final exam
BS 2 Individual assignment brief question august 2016
The document provides guidelines for an individual assignment on building services. It states that students must attempt a building services problem question and write an essay on a specified topic. The essay must adhere to minimum and maximum word limits and include footnotes, a bibliography, and references. It must be submitted as a softcopy by the given deadline of October 12, 2016. Any deviations from the guidelines will result in penalties to the student's score. The topic requires students to critically analyze and discuss various ways that air conditioning systems can enhance green technology in line with Malaysia's National Green Technology Policy.
Ash edu-695-week-1-assignment-21st-century-framework-revision-new
This document provides guidelines for an assignment to redesign a prior coursework assignment to incorporate 21st century skills. Students are instructed to select a previous lesson plan or teaching unit and revise it to include at least one component each of 21st century student outcomes and support systems. The redesign must also demonstrate mastery of the program learning outcomes. Students are to write a summary explaining the revisions made and reflecting on challenges encountered in the redesign process. The summary is to be 2-4 pages following APA style guidelines and referencing at least three additional scholarly sources.
Addie model
The document outlines the ADDIE model, a general purpose instructional design model consisting of 5 phases - Analysis, Design, Development, Implementation, and Evaluation. In the Analysis phase, needs are assessed through learner profiles and problem/task analysis. Design specifies learning objectives and instructional strategies. Development produces materials like storyboards and exercises. Implementation installs the product through training and field testing. Evaluation determines adequacy through surveys, test data, and revisions.
TuHS Technology Use Plan- McManamon
This document outlines a technology use plan for a school. It discusses forming a planning team to direct technology integration and conduct needs assessments. The vision is to equip students with 21st century skills and provide access to technology for learning. Goals include inventorying equipment, integrating technology into lessons, providing staff training, and gaining community involvement. The plan describes assessing technology needs, establishing a staff development calendar, and evaluating progress toward the vision.
Recommended
Bs1 assignment semester 2016 august
This document provides an assignment brief for a group project on building services systems. Students will be assigned to one of 10 topics and required to research and document the selected topic. They must explain the application, installation process, benefits, problems and include a case study. The 5,500 word report must follow a specified format and will be assessed based on demonstrated understanding, quality of documentation, richness of content, clear communication and appropriate use of drawings/photographs. Upon completion, students will understand and explain relevant information, identify applications and installations, and make recommendations for future improvements related to their assigned topic.
Storm water management
1. The document outlines a group project for students to study and report on various building services systems.
2. Students will be assigned to one of 10 topics and must prepare a 3500+ word report and visual documentation explaining their selected topic, including the application, installation process, benefits, problems, and recommendations.
3. Reports must follow a specified format and will be evaluated based on demonstrated understanding, quality of documentation, content richness, and clear communication.
Group project bs1
1. The document provides details for a group project assignment on building services systems for a Quantity Surveying course.
2. Students will be assigned to groups of up to 6 people and each group will analyze one of 10 topics related to sustainable building services.
3. The final deliverables are an A4 bound report of at least 3500 words analyzing the assigned topic, including visuals, installation processes, advantages/disadvantages, a case study, and recommendations. Groups will also do a 7-10 minute presentation on their topic.
Ash edu 695 week 2 assignment 21st century skills and standards new
Ash edu 695 new,Ash edu 695 new,Ash edu 695 new complete course,Ash edu 695 new entire course,Ash edu 695 new week 1,Ash edu 695 new week2,Ash edu 695 new week 3,Ash edu 695 new week 4,Ash edu 695 new week 5,Ash edu 695 new tutorials, Ash edu 695 newassignments, Ash edu 695 newhelp,Ash edu 695 new final exam
BS 2 Individual assignment brief question august 2016
The document provides guidelines for an individual assignment on building services. It states that students must attempt a building services problem question and write an essay on a specified topic. The essay must adhere to minimum and maximum word limits and include footnotes, a bibliography, and references. It must be submitted as a softcopy by the given deadline of October 12, 2016. Any deviations from the guidelines will result in penalties to the student's score. The topic requires students to critically analyze and discuss various ways that air conditioning systems can enhance green technology in line with Malaysia's National Green Technology Policy.
Ash edu-695-week-1-assignment-21st-century-framework-revision-new
This document provides guidelines for an assignment to redesign a prior coursework assignment to incorporate 21st century skills. Students are instructed to select a previous lesson plan or teaching unit and revise it to include at least one component each of 21st century student outcomes and support systems. The redesign must also demonstrate mastery of the program learning outcomes. Students are to write a summary explaining the revisions made and reflecting on challenges encountered in the redesign process. The summary is to be 2-4 pages following APA style guidelines and referencing at least three additional scholarly sources.
Addie model
The document outlines the ADDIE model, a general purpose instructional design model consisting of 5 phases - Analysis, Design, Development, Implementation, and Evaluation. In the Analysis phase, needs are assessed through learner profiles and problem/task analysis. Design specifies learning objectives and instructional strategies. Development produces materials like storyboards and exercises. Implementation installs the product through training and field testing. Evaluation determines adequacy through surveys, test data, and revisions.
TuHS Technology Use Plan- McManamon
This document outlines a technology use plan for a school. It discusses forming a planning team to direct technology integration and conduct needs assessments. The vision is to equip students with 21st century skills and provide access to technology for learning. Goals include inventorying equipment, integrating technology into lessons, providing staff training, and gaining community involvement. The plan describes assessing technology needs, establishing a staff development calendar, and evaluating progress toward the vision.
Instructional Design
This presentation introduces ADDIE model and tries to suggest actions and outputs for each stage of the model.
Ash edu 695 week 1 assignment 21st century framework revision new
Ash edu 695 new,Ash edu 695 new,Ash edu 695 new complete course,Ash edu 695 new entire course,Ash edu 695 new week 1,Ash edu 695 new week2,Ash edu 695 new week 3,Ash edu 695 new week 4,Ash edu 695 new week 5,Ash edu 695 new tutorials, Ash edu 695 newassignments, Ash edu 695 newhelp,Ash edu 695 new final exam
MS Qsb 2413 group project 2016
The document outlines a group project for a management science class. Students are to imagine starting a construction company with RM 1 million in capital along with 4 friends. They must:
1) Create a vision, mission statement, and goals for the short, mid, and long-term along with an organizational chart and job descriptions.
2) Develop selection criteria for 3 management trainee positions and propose at least 3 interview activities to test candidates against the criteria.
3) Suggest how the company will utilize information technology and management to gain a competitive advantage.
Guidelines for internal assessment corporate law
The document provides guidelines for an internal assessment consisting of a PowerPoint presentation and word document. It specifies that the presentation is worth 20 marks and the word document 10 marks. Students must have a minimum 75% attendance to be eligible. The PowerPoint presentation should be 30-35 minutes with no more than 25 slides and include 4 randomly selected group members presenting. The word document should be 50 pages following a specified format and include case studies, recommendations, and primary research. Formal business attire is required for presentations.
EDLD 5352 Texas STaR Chart
The document discusses using the STaR Chart to assess technology readiness at Johnson Elementary School. It provides an agenda for a meeting including an introduction to the STaR Chart, a review of campus STaR data, and a discussion of strengths and new areas of focus. The school's strength is its infrastructure for technology like a computer lab and student laptops. The identified focus is improving educator preparation and development by providing more technology training for teachers through staff development and online modules.
Salford Assessment
The document discusses assessment practices at Salford Business School. It provides examples of innovative assessment methods including paperless assessment where assignments and exams are submitted online. It also describes automated individual feedback sheets generated from assessment criteria and student marks. Finally, it discusses some issues around assessment such as the effort required from staff, linkages between different assessment components, and ensuring student benefit from feedback.
Cypress Star Chart
The document summarizes the results of Cypress Elementary Campus's STaR Chart assessment for 2006-2008. The STaR Chart evaluates schools' technology use and readiness based on four key areas: teaching and learning, educator preparation, leadership and administration, and infrastructure. Strengths identified were a robust network, efficient tech support, and new classroom technologies. Areas of focus were improving teacher adoption of student data tracking, including STaR goals in campus plans, encouraging teacher training, and educating teachers on technology standards. An action plan was proposed to share results, form a technology committee, gather feedback, and include technology in the campus plan to help Cypress progress to higher levels of technology use.
Concurso
The workshop 'Statistics Support Group' will be held from July 11-15, 2016 in an undetermined location, facilitated by Dr. Andrew Taylor, and will allow up to 25 graduate students in biology to gain statistical knowledge and competence by working together to design studies, analyze data, and communicate about statistics using problems presented by students. Participants needing help with study design or data analysis should provide clear descriptions and shareable data or computer software to work on problems during the workshop.
Building Services Assignment 1
The document discusses building services systems at PJ Trade Centre, including air conditioning, electrical supply, fire protection, and mechanical ventilation/transportation systems. It provides an introduction and literature review on each system, as well as case studies detailing the components, functions, regulations, and diagrams of the air conditioning, electrical, and fire protection systems implemented at the building. The document is a case study report authored by six students analyzing and documenting the various building services systems.
Building services 2 assignment
The document provides an acknowledgement and thanks to various individuals who helped with completing a case study assignment on building services in the PKNS Complex. It thanks the group members, group leader, the person in charge of PKNS Complex who approved the visit, and the lecturer who provided guidance. It then provides an abstract stating that the case study examined the fire protection, mechanical, vertical transportation, and electrical systems in the complex and looked at existing systems, problems, and recommendations for improvement.
BUILDING SERVICE GROUP ASSIGNMENT
Task
We are required to select a building as a case study project.
Observe the building services systems taught in this module.
The case study building - PKNS Complex, Shah Alam
Building Services assignment 1
The document provides an overview of the SMART Tunnel in Kuala Lumpur, Malaysia. Some key points:
1) The SMART Tunnel was constructed to manage stormwater and reduce flooding in Kuala Lumpur following massive floods.
2) It is 9.7km long and runs from Kampung Berembang Lake to Taman Desa Lake, making it the longest stormwater tunnel in Southeast Asia.
3) The tunnel has three sections - a lower channel to receive stormwater and upper/middle decks for motor vehicles. During severe storms, water is diverted into the lower channel and traffic is evacuated from the motorway section.
4) The tunnel was
BS 2 Group assignment example Building services-bangsar-village-1
This document provides an overview of the mechanical ventilation and air conditioning system at Bangsar Village 1. It begins with an introduction to mechanical ventilation and air conditioning. It then discusses the literature review on these topics. The remainder of the document describes the various components of the HVAC system at Bangsar Village 1, including the central plant system, chillers, cooling towers, air handling units, fan coil units, and more. It provides case studies and diagrams of the refrigeration system at Bangsar Village 1.
Software assignment
The document provides an overview of 5 BIM software programs used for quantity surveying: Nomitech CostOS, Exactal Cost X, Vico Takeoff Manager, Glodon TAS, and Buildsoft Cubit. It describes the key functions and limitations of each software. CostOS, Cost X, and TAS allow generating quantities and cost estimates directly from 3D models. They provide accurate measurement and integrated cost databases. However, some like Cost X require users to self-prepare bills of quantities. Overall, the software programs aim to improve efficiency, accuracy, and collaboration for quantity surveying tasks through model-based measurement and reporting.
Bs presentation slides
In a direct DHW system, precipitation of limescale can occur when water is heated, clogging pipes and boilers. This system is only suitable for soft water areas and can damage equipment. An indirect DHW system uses a heat exchanger to prevent this issue, making it more common and allowing boiler use for central heating. It requires a secondary circulation to avoid dead legs in pipes.
Sem 2 Bs assignment ppt
Ventilation is important in heritage buildings to provide fresh air and remove contaminants. Historically, natural ventilation methods like operable windows and stack effect were used. However, with global warming, heritage buildings now face issues like excessive heat without proper ventilation. The document suggests increasing the efficiency of ventilation systems through mechanical ventilation or passive methods like solar chimneys that utilize natural elements like stack effect while addressing current climate challenges.
Intro, bab 1 bab 2
Dokumen tersebut membahas tentang penilaian berkelanjutan dalam suatu mata pelajaran yang terdiri dari penilaian berkelanjutan sebesar 70% (termasuk 2 ujian tengah semester dan tugas) dan ujian akhir sebesar 30%.
Cold water supply
This document discusses the cold water supply for a plumbing unit. It begins with an overview of the hydrology cycle, including the processes of evaporation, transpiration, condensation, precipitation, and runoff. It then discusses sources of water supply such as lakes, streams, rivers, and reservoirs for surface water and wells and springs for underground water. The document also covers examining water samples using acid and alkali litmus paper and defines water hardness in terms of calcium and magnesium ion content, and methods for softening hard water.
Sabd undergraduate pg draft v3
This document provides a history of the School of Architecture, Building and Design (SABD) at Taylor's University. It details the establishment and evolution of SABD and its programmes over time, including achieving accreditation from various professional bodies. Key developments include launching diploma programmes in 1998, establishing partnerships with overseas universities, receiving full accreditation for programmes, renaming and expanding the scope of SABD, and introducing degree programmes culminating in a Master of Architecture programme in 2013. The history shows SABD's growth from initially offering diploma courses to becoming a school providing a full suite of built environment programmes up to postgraduate level.
Sem 2 bs1 cold water supply 1
The lecture overview summarizes the water supply process from source to residential buildings. It discusses water sources like surface water and groundwater. It then explains the multi-step water treatment process including coagulation, flocculation, sedimentation, filtration, disinfection and storage. It also discusses external and internal water distributions as well as direct and indirect water supply systems to residential buildings.
Hot Water Supply Report BS1
This document discusses the installation of hot water supply systems for hotels and corporate buildings. It covers various types of centralized and localized hot water systems, factors to consider when choosing a system, and describes how centralized hot water distribution systems work. Centralized systems use a central storage tank and piping to distribute hot water, while localized systems heat water near the point of use. Key decisions for designing a system include the energy source, storage method, layout, and capacity. Safety, efficiency, and meeting user demand are also important considerations.
Sem 2 bs1 Hot water supply system 2
This document discusses hot water supply systems for buildings, including materials, piping, and system designs for large buildings and high-rise buildings. It covers acceptable pipe materials like copper, polybutylene, and cross-linked polyethylene. For large buildings, it describes a centralized system with zoning valves to isolate floors for repairs. For high-rises, it explains zoning floors, using a head tank to improve water flow to upper floors, and maintaining pressure throughout the system.
More Related Content
What's hot
Instructional Design
This presentation introduces ADDIE model and tries to suggest actions and outputs for each stage of the model.
Ash edu 695 week 1 assignment 21st century framework revision new
Ash edu 695 new,Ash edu 695 new,Ash edu 695 new complete course,Ash edu 695 new entire course,Ash edu 695 new week 1,Ash edu 695 new week2,Ash edu 695 new week 3,Ash edu 695 new week 4,Ash edu 695 new week 5,Ash edu 695 new tutorials, Ash edu 695 newassignments, Ash edu 695 newhelp,Ash edu 695 new final exam
MS Qsb 2413 group project 2016
The document outlines a group project for a management science class. Students are to imagine starting a construction company with RM 1 million in capital along with 4 friends. They must:
1) Create a vision, mission statement, and goals for the short, mid, and long-term along with an organizational chart and job descriptions.
2) Develop selection criteria for 3 management trainee positions and propose at least 3 interview activities to test candidates against the criteria.
3) Suggest how the company will utilize information technology and management to gain a competitive advantage.
Guidelines for internal assessment corporate law
The document provides guidelines for an internal assessment consisting of a PowerPoint presentation and word document. It specifies that the presentation is worth 20 marks and the word document 10 marks. Students must have a minimum 75% attendance to be eligible. The PowerPoint presentation should be 30-35 minutes with no more than 25 slides and include 4 randomly selected group members presenting. The word document should be 50 pages following a specified format and include case studies, recommendations, and primary research. Formal business attire is required for presentations.
EDLD 5352 Texas STaR Chart
The document discusses using the STaR Chart to assess technology readiness at Johnson Elementary School. It provides an agenda for a meeting including an introduction to the STaR Chart, a review of campus STaR data, and a discussion of strengths and new areas of focus. The school's strength is its infrastructure for technology like a computer lab and student laptops. The identified focus is improving educator preparation and development by providing more technology training for teachers through staff development and online modules.
Salford Assessment
The document discusses assessment practices at Salford Business School. It provides examples of innovative assessment methods including paperless assessment where assignments and exams are submitted online. It also describes automated individual feedback sheets generated from assessment criteria and student marks. Finally, it discusses some issues around assessment such as the effort required from staff, linkages between different assessment components, and ensuring student benefit from feedback.
Cypress Star Chart
The document summarizes the results of Cypress Elementary Campus's STaR Chart assessment for 2006-2008. The STaR Chart evaluates schools' technology use and readiness based on four key areas: teaching and learning, educator preparation, leadership and administration, and infrastructure. Strengths identified were a robust network, efficient tech support, and new classroom technologies. Areas of focus were improving teacher adoption of student data tracking, including STaR goals in campus plans, encouraging teacher training, and educating teachers on technology standards. An action plan was proposed to share results, form a technology committee, gather feedback, and include technology in the campus plan to help Cypress progress to higher levels of technology use.
Concurso
The workshop 'Statistics Support Group' will be held from July 11-15, 2016 in an undetermined location, facilitated by Dr. Andrew Taylor, and will allow up to 25 graduate students in biology to gain statistical knowledge and competence by working together to design studies, analyze data, and communicate about statistics using problems presented by students. Participants needing help with study design or data analysis should provide clear descriptions and shareable data or computer software to work on problems during the workshop.
What's hot (8)
Ash edu 695 week 1 assignment 21st century framework revision new
Ash edu 695 week 1 assignment 21st century framework revision new
Viewers also liked
Building Services Assignment 1
The document discusses building services systems at PJ Trade Centre, including air conditioning, electrical supply, fire protection, and mechanical ventilation/transportation systems. It provides an introduction and literature review on each system, as well as case studies detailing the components, functions, regulations, and diagrams of the air conditioning, electrical, and fire protection systems implemented at the building. The document is a case study report authored by six students analyzing and documenting the various building services systems.
Building services 2 assignment
The document provides an acknowledgement and thanks to various individuals who helped with completing a case study assignment on building services in the PKNS Complex. It thanks the group members, group leader, the person in charge of PKNS Complex who approved the visit, and the lecturer who provided guidance. It then provides an abstract stating that the case study examined the fire protection, mechanical, vertical transportation, and electrical systems in the complex and looked at existing systems, problems, and recommendations for improvement.
BUILDING SERVICE GROUP ASSIGNMENT
Task
We are required to select a building as a case study project.
Observe the building services systems taught in this module.
The case study building - PKNS Complex, Shah Alam
Building Services assignment 1
The document provides an overview of the SMART Tunnel in Kuala Lumpur, Malaysia. Some key points:
1) The SMART Tunnel was constructed to manage stormwater and reduce flooding in Kuala Lumpur following massive floods.
2) It is 9.7km long and runs from Kampung Berembang Lake to Taman Desa Lake, making it the longest stormwater tunnel in Southeast Asia.
3) The tunnel has three sections - a lower channel to receive stormwater and upper/middle decks for motor vehicles. During severe storms, water is diverted into the lower channel and traffic is evacuated from the motorway section.
4) The tunnel was
BS 2 Group assignment example Building services-bangsar-village-1
This document provides an overview of the mechanical ventilation and air conditioning system at Bangsar Village 1. It begins with an introduction to mechanical ventilation and air conditioning. It then discusses the literature review on these topics. The remainder of the document describes the various components of the HVAC system at Bangsar Village 1, including the central plant system, chillers, cooling towers, air handling units, fan coil units, and more. It provides case studies and diagrams of the refrigeration system at Bangsar Village 1.
Software assignment
The document provides an overview of 5 BIM software programs used for quantity surveying: Nomitech CostOS, Exactal Cost X, Vico Takeoff Manager, Glodon TAS, and Buildsoft Cubit. It describes the key functions and limitations of each software. CostOS, Cost X, and TAS allow generating quantities and cost estimates directly from 3D models. They provide accurate measurement and integrated cost databases. However, some like Cost X require users to self-prepare bills of quantities. Overall, the software programs aim to improve efficiency, accuracy, and collaboration for quantity surveying tasks through model-based measurement and reporting.
Bs presentation slides
In a direct DHW system, precipitation of limescale can occur when water is heated, clogging pipes and boilers. This system is only suitable for soft water areas and can damage equipment. An indirect DHW system uses a heat exchanger to prevent this issue, making it more common and allowing boiler use for central heating. It requires a secondary circulation to avoid dead legs in pipes.
Sem 2 Bs assignment ppt
Ventilation is important in heritage buildings to provide fresh air and remove contaminants. Historically, natural ventilation methods like operable windows and stack effect were used. However, with global warming, heritage buildings now face issues like excessive heat without proper ventilation. The document suggests increasing the efficiency of ventilation systems through mechanical ventilation or passive methods like solar chimneys that utilize natural elements like stack effect while addressing current climate challenges.
Intro, bab 1 bab 2
Dokumen tersebut membahas tentang penilaian berkelanjutan dalam suatu mata pelajaran yang terdiri dari penilaian berkelanjutan sebesar 70% (termasuk 2 ujian tengah semester dan tugas) dan ujian akhir sebesar 30%.
Cold water supply
This document discusses the cold water supply for a plumbing unit. It begins with an overview of the hydrology cycle, including the processes of evaporation, transpiration, condensation, precipitation, and runoff. It then discusses sources of water supply such as lakes, streams, rivers, and reservoirs for surface water and wells and springs for underground water. The document also covers examining water samples using acid and alkali litmus paper and defines water hardness in terms of calcium and magnesium ion content, and methods for softening hard water.
Sabd undergraduate pg draft v3
This document provides a history of the School of Architecture, Building and Design (SABD) at Taylor's University. It details the establishment and evolution of SABD and its programmes over time, including achieving accreditation from various professional bodies. Key developments include launching diploma programmes in 1998, establishing partnerships with overseas universities, receiving full accreditation for programmes, renaming and expanding the scope of SABD, and introducing degree programmes culminating in a Master of Architecture programme in 2013. The history shows SABD's growth from initially offering diploma courses to becoming a school providing a full suite of built environment programmes up to postgraduate level.
Sem 2 bs1 cold water supply 1
The lecture overview summarizes the water supply process from source to residential buildings. It discusses water sources like surface water and groundwater. It then explains the multi-step water treatment process including coagulation, flocculation, sedimentation, filtration, disinfection and storage. It also discusses external and internal water distributions as well as direct and indirect water supply systems to residential buildings.
Hot Water Supply Report BS1
This document discusses the installation of hot water supply systems for hotels and corporate buildings. It covers various types of centralized and localized hot water systems, factors to consider when choosing a system, and describes how centralized hot water distribution systems work. Centralized systems use a central storage tank and piping to distribute hot water, while localized systems heat water near the point of use. Key decisions for designing a system include the energy source, storage method, layout, and capacity. Safety, efficiency, and meeting user demand are also important considerations.
Sem 2 bs1 Hot water supply system 2
This document discusses hot water supply systems for buildings, including materials, piping, and system designs for large buildings and high-rise buildings. It covers acceptable pipe materials like copper, polybutylene, and cross-linked polyethylene. For large buildings, it describes a centralized system with zoning valves to isolate floors for repairs. For high-rises, it explains zoning floors, using a head tank to improve water flow to upper floors, and maintaining pressure throughout the system.
Sem 2 bs1 cold water supply 2
The document provides information on cold water supply systems for high-rise buildings. It discusses pneumatic cylinder systems that use compressed air to pump water to upper floors. It also covers common pipe materials like copper, plastic, cast iron and their properties. Finally, it discusses sizing of cold water pipes, sanitary appliances, and accessibility features for disabled people like grab bars and lever taps.
Sem 2 bs1 drainage, sewerage disposal and treatment
The document provides information about drainage, sewerage disposal, and sewage treatment systems. It discusses the components of drainage systems including pipes, sanitary appliances, traps, and main sewer pipes. It explains design considerations for drainage systems and the purpose of traps. The document also defines sewage and sewage sludge. It describes primary, secondary, and tertiary sewage treatment methods and various treatment systems used including aerated lagoons, oxidation ditches, and trickling filters. Finally, it discusses the two main types of sewerage systems in Malaysia - individual septic tanks and connected sewage systems linked to treatment plants.
Cold water system
The document describes the domestic water system for a building with multiple pumps and water tanks. There are pumps in the basement and on the roof to transfer water between tanks and circulate the water. Float switches and pressure sensors control the pumps to maintain water levels and pressure. The building management system monitors pump status and will alarm for tank water level issues.
Sem 2 bs1 storm water system
This document discusses stormwater systems and management. It begins by defining stormwater as rain and snowmelt running off surfaces into storm drains and waterways. As stormwater flows, it can pick up pollution. Large impervious surfaces from urban development increase runoff quantities and cause issues like flooding, erosion, and habitat loss. The document outlines how stormwater can impact human health, drinking water, and aquatic life if untreated. It then describes components of stormwater drainage systems like storm drains, catch basins, and pipes. Stormwater management aims to control runoff quantities and treat pollution using structural methods like retention ponds and green infrastructure before discharge. Factors like impervious surfaces and development practices affect stormwater and need
Sem 2 bs1 hot water supply system 1
This document provides an overview of hot water supply systems, including electrical and solar heating systems. It discusses the types of hot water systems, focusing on electrical tank-less and storage water heaters as well as solar water heating systems. The key advantages and disadvantages of each system are outlined. Solar water heating is highlighted as a clean energy alternative that is well-suited for Malaysia's climate.
Viewers also liked (20)
BS 2 Group assignment example Building services-bangsar-village-1
BS 2 Group assignment example Building services-bangsar-village-1
Sem 2 bs1 drainage, sewerage disposal and treatment
Sem 2 bs1 drainage, sewerage disposal and treatment
Similar to Assignment - Building Services 1
Group project bs1
1. The document provides details for a group project assignment on building services systems for a Quantity Surveying course.
2. Students will be assigned to groups of up to 6 people and tasked with preparing a report on one of 10 topics related to sustainable building services.
3. The 3500-word report must include documentation of the selected system, an explanation of the installation process, benefits and problems, at least one case study, and recommendations for future improvements. Reports will be assessed based on demonstrated understanding, quality of documentation, and clear communication.
Handbook Points to Know
This PowerPoint covers the most important Handbook information that you need to be aware of for this course.
Ash edu 675 week 6 final project action research formal presentation of findi...
edu 675 week 6 dq 1 impact reflection new,edu/675 week 6,ash edu 675 week 6 dq 1edu/675,ash edu/675,ash edu 675 week 6 assignment,edu 675 entire course,edu 675 week 6 assignment,edu 675 new,edu 675 week 6 help,edu 675 week 6 tutorials
Course Expectations/Important Handbook Information
This presentation outlines the course expectations, and other important information from the Handbook to help you successfully complete this course.
SEM 6 : PORTFOLIO PROJECT BRIEF
This document outlines the requirements and assignments for an Architectural Portfolio module. It includes two assignments: 1) a portfolio draft focusing on curating and presenting 4 projects, and 2) a 400-word personal design statement. Students must select projects from their academic program to represent their design direction and approach. They will create a layout for the projects in a customized format between A5-A3 size. They must also sketch an initial packaging concept. The final portfolio will be a bound compilation of the projects and design statement, completed with the latest studio work. It will be graded based on personal design statement, curation, composition, completion, and packaging.
Ash edu 675 week 6 final project action research formal presentation of findi...
edu 675,edu 675 entire course,edu 675 ash,ash edu 675,edu 675 new,ash edu 675 assignments,ash edu 675 week 6 final,edu 675 week 1,edu 675 week 2,edu 675 week 3,edu 675 week 4,edu 675 week 5,edu 675 week 6
Ash edu 675 week 6 final project action research formal presentation of findi...
edu 675 week 6 final project action research formal presentation of findings new,edu/675 week 6,ash edu 675 week 6 dq 1,edu/675,ash edu/675,ash edu 675 week 6 assignment,edu 675 entire course,edu 675 week 6 assignment,edu 675 new,edu 675 week 6 help,edu 6
The Preliminary Project Report
The Preliminary Project Report
Reporting your Project work
The Format of the Preliminary Project Report
Format of the Project Report
Citing your references
the reference list
Referencing other parts of your report −
cross-referencing
Quoting, summarising, avoiding plagiarism
Faults in reports
Chapter Capstone Project Ideas 2024-1.pptx
This document provides an outline for a capstone project on technopreneurship. It begins by explaining the objectives of the capstone project, which are to explain benefits, formulate a research concept, and share current research in one's field. Next, it defines what a capstone project is and compares it to a thesis. The document then provides guidance on how to write a capstone paper, including choosing a topic, drafting a proposal, and structuring the paper. It also provides examples of capstone titles. The remainder of the document outlines the sections and contents of a capstone project, including preliminaries, introduction, purpose/description, objectives, and scope/limitations. The introduction section in particular is
How to make a project report for schools, colleges, universities, researchers...
This ppt gives you an idea about frequently made project report. Do checkout my other ppt based on research proposal, review paper, internship report etc.
Dissertation Structure GuidelinesIt will be important to set
Dissertation Structure Guidelines
It will be important to set some broad guidelines and ground rules as well as highlighting the dissertation structure that your supervisors would like their students to adhere to. Suffice to say these issues have already been highlighted and discussed with you in detail in your PRISM unit.
In summary, when you start working on your dissertation and develop your thinking and findings a bit more, you may wish to have a chat with your supervisor; a call or Skype or using some other online tool. Also a good idea to send your supervisor your chapters as you complete them so that they can provide their comments as you make progress on other chapters. However please consult your supervisor if he/she wishes to consider an alternative approach.
There is a document called Assessment Guidelines on this Moodle site that gives a very brief outline of the suggested chapters involved in your dissertation and an idea of the number of words that are usually expected in each chapter.
In the meantime, as far as your dissertation structure is concerned, let us just remind you that as a general rule, we would suggest the following chapters and sections for your thesis.
-Title: A clear, concise statement of the topic.
-Abstract: The abstract is a summary of the whole dissertation. It presents all the major elements of your work in a highly condensed form. Maximum of 500 words.
- Contents page: clearly describing chapters and any sub-sections and related page numbers.
- Acknowledgement- Chapter 1 - Introduction: You need to set the scene for your dissertation, tell a story by providing some background to the importance of your chosen subject. You should also make your aims and objectives of the report very clear, by for example providing half a dozen bullets clearly describing what you have in mind and what you wish to explore. You should clearly state your "Research Question (s)" and state why your research is important, what is the research gap, how it contributes to the body of knowledge and potentially it’s significance to the practitioner’s world, and, what benefit will be achieved in carrying out your chosen piece of work.
- Chapter 2 - Literature Survey (LR): This is a very important part of your dissertation (particularly if you only rely on acquiring secondary data and body of knowledge). The aim will be for you to provide robust and credible literature relating to the subject matter. Use of some models/frameworks is encouraged. You will also get a better mark by providing a sound critic in your LR, i.e. what you agree with and what you don't, and, the reasons behind your argument/rationale.
- Chapter 3 - Research Methodology: Here you should describe the methodology used in gathering the data and information. You should make reference to both the primary, if any, (interviews, questionnaire, case study ...) and, secondary research methods (literature review and library based work...). You should also describe an ...
1 London School of Business & Management QCF L.docx
1
London School of Business & Management
QCF Level 5- HND
Unit Outcomes Covered:
LO1 Understand how to formulate a research specification
LO2 Be able to implement the research project within agreed procedures and
to specification
LO3 Be able to evaluate the research outcomes
LO4 Be able to present the research outcomes
GRADING OPPORTUNITIES AVAILABLE
Outcomes/ Grade
Descriptors
AC
1.1
AC
1.2
AC
1.3
AC
1.4
AC
1.5
AC
2.1
AC
2.2
AC
2.3
AC
3.1
AC
3.2
AC
3.3
AC
4.1
V V V V V V V V V V V V
Outcomes/ Grade
Descriptors
M1 M2 M3 D1 D2 D3
V V V V V V
Assessor: Signature: ______________ Date: ___/___/___
Centre No 79829
Unit No & Unit Title Unit 8: Research Project
Assessor’s Name Dr Knowledge Mpofu
Assignment Title & Type RP Individual Assignment
Date Set 17th January 2017
Due Date 10th April 2017
Semester / Academic
Year
January 2017 Semester
2
Assignment Brief
Introduction:
Relevant For All Tasks 1- 4
Research is a process of inquiry about problems that do not have immediate solutions. The world is full
of problems that require research-informed solutions. The purpose of research in business and
management contexts is to inform action and decision-making, while enhancing knowledge on how best
to address problems emerging in organisations. A systematic investigation is required through
qualitative and/or quantitative methodology in order to generate results (primary or secondary data) that
can help to inform actions and decision-making. The choice of appropriate methods for data collection
(e.g interviews and questionnaires) and data analysis is critical in order to produce useful information
and knowledge which is applicable for the organisation and other settings. High quality research
findings have implications for policy, practice and further research. Publishing results from research
studies in secondary sources such as books, journal articles business reports and on-line based
sources make it easier for the global community to access useful information and knowledge needed for
decision-making in business and management contexts (Saunders, Lewis and Thornhill, 2009).
.
Pursuing a research project will be a challenging and rewarding experience. This opportunity enables
you to carry out an in-depth original study on a topic of interest.
In this module, you are expected to develop skills of independent inquiry and critical analysis by
undertaking a research investigation on topic of interest within a business, management or
organisational context. You will be required to think about a problematic issue or problem in an
organisation that you want to investigate and conduct primary and secondary research accordingly, in
order to produce findings that should be analysed and clearly presented using appropriate methods.
The TASKS will include the following ::
Firstly: you will learn h ...
KNOWLEDGE ASSESSMENT SELF REVIEW.docx
This document provides instructions for applicants completing a Knowledge Assessment Self Review form to assess equivalence to a Washington Accord engineering degree. It describes the requirements for three sections: 1) demonstrating knowledge of complex engineering problems, 2) summarizing knowledge in key areas like mathematics and natural sciences, and 3) providing examples of engineering project experience and applying knowledge to solve problems. Applicants must certify their academic history, professional experience, and continuing professional development to show how their knowledge matches the expectations for a professionally licensed engineer.
KNOWLEDGE ASSESSMENT SELF REVIEW.docx
This document provides instructions for completing a Knowledge Assessment Self Review form to demonstrate equivalence to a Washington Accord engineering degree. It outlines 8 elements of engineering knowledge that must be addressed, with performance indicators for each. The applicant is asked to summarize their knowledge in each area, developed through study, work and continuing education. They must also describe 3-4 engineering projects they have worked on that demonstrate application of complex problem-solving skills. Supplementary evidence like transcripts and work samples must be provided to support the assessment.
Handbook Highlights Presentation
This presentation highlights the important points of the module Handbook you will need to know for successful completion of the module.
EEECSE 120 Answer SheetCapstone Design Project .docx
EEE/CSE 120
Answer Sheet
Capstone Design Project
Name:__________________________
Instructor:__________________________
Class Time:________________________
Date:________________________
Task 4-1: Design of Synchronous Sequential Machines
Design #1 (Mealy machine)
: What assumptions did you make in the design of this machine?
Create a state definition table here that describes in plain English what each state in your machine means and what binary values you have assigned to represent each state.
Create tables here to display your state diagrams, state transition tables and Karnaugh maps used in your design process. (You can do this by hand if you wish.)
Cut and paste your Quartus schematic and timing diagram simulation for design #1 (Mealy machine) here:
Design #2 (Moore machine): What assumptions did you make in the design of this machine?
Create a state definition table here that describes in plain English what each state in your machine means and what binary values you have assigned to represent each state.
Create tables here to display your state diagrams, state transition tables and Karnaugh maps used in your design process. (You can do this by hand if you wish.)
Cut and paste your Quartus schematic and timing diagram simulation for design #2 (Moore machine) here:
Task 4-2: Simulate Both Designs in the Lab in Presence of the TA
Demonstrate that both of your circuits meet the completed design specification to the laboratory assistants and have the TAs apply a grade here.
Grade: 1st Design ____/15 Grade: 2nd Design____/15
Task 4-3: Determine Criteria and Weighting for Judging Your Designs
Using the guidelines in the laboratory manual, list your criteria and associated weights here:
Criteria
Weight
Task 4-4: Apply the Criteria to Pick the Best Design
Describe how you applied the criteria and weighting system in the above task to pick the best design.
Which design is better based on your criteria and weighting system?
Task 4-5: Upload One Design to the FPGA Board in the Laboratory
Demonstrate to a laboratory assistant that one of your designs works according to your completed specification.
Laboratory assistant evaluation:
Capstone Design Project: Lab Report Grade Sheet
Name:
Instructor Assessment:
Grading Criteria
Max Points
Points lost
Template
Neatness, Clarity, and Concision
5
Description of Assigned Tasks, Work Performed & Outcomes Met
Task 4-1: Design of Synchronous Sequential Machines
22
Task 4-2: Simulate Both Designs
30
Task 4-3: Determine Criteria and Weighting for Judging Your Designs
5
Task 4-4: Apply the Criteria to Pick the Best Design
8
Task 4-5: Upload One Design to the FPGA Board in the Laboratory
30
Self-Assessment Worksheet (The content of the self-assessment worksheet will not be graded. Full credit is given for including the completed worksheet.)
(2 extra points)
Points .
INFS4887 Business Research Methods S1 2013.pdf
This document provides the course outline for INFS4887 Business Research Methods. It includes information on the course staff, units of credit, aims and learning outcomes. The course involves lectures, workshops and assignments to develop skills in research instrument design, data analysis and research methodology. Students will complete individual assignments on data analysis, quantitative instrument design and qualitative instrument design, and must participate actively in workshops. The course aims to prepare students to conduct independent research projects and theses.
Management Information System Practice Orientations abou.docx
Management Information System Practice
Orientations about the Final Project
Introduction
The present project is a practice exercise where students will apply the concepts studied
in class analyzing an organization or firm, in this case the organization will be the firm
where each student works or Polytechnic University (Orlando-Miami Campuses) if the
student does not work.
Objective
Propose a new system or improve and existent system of an organization applying the
knowledge learned in the different courses of Business Administration Program.
Reference
C. V. Brown, D. W. DeHayes et al. Managing Information Technology, Seventh Edition,
Pearson Prentice Hall, 2012.
Students are encouraged to add their own reading list as appropriate.
Development
The development of the project requires the following analysis:
1. Current structure and behavioral view of the organization.
2. The structural characteristics cover a clear dividing of labor (managers and staff),
hierarchy, explicit rules and procedures, impartial judgments, technical
qualifications for positions, and maximum organizational efficiency.
3. Classify what type of organizational structure is It, and it differences respect other
types of organizations similar to. Unique characteristics of this organization
respect to other high educational center such as organizational type,
environments, goals, power, constituencies, function, leadership, tasks,
technology, and business process. It principal strengths and weakness.
4. Current information technology and current information systems. How these
resources are used (or not).
5. Experiences of other competitors which use information systems. How these ISs
could affect the organization.
6. Analysis of Information systems more implemented in this type of organizations
and which the team will recommend and why?
7. Develop a proposal redesigned the organization with information systems. The
role of a network and Internet in this proposal.
8. Information systems security and control.
9. Assessing the cost of the proposal.
10. Writing of the final project in MS Word. Parts of report: (Title, author and
professor, Index, Introduction, Goals, Development, Conclusion and
Recommendations, and References, Some diagrams and pictures could be
included. These must have numbers and titles.
11. PowerPoint presentation.
Deadline
The project will have six phases or cuts, which end with a report.
First phase (09/23/2013 - 09/29/2013): In this phase, the student must specify what will
be the organization or firm selected. It could be the organization where each student
works or any other selected by him. You can select a division, a department, a section of
a production process, etc.
Note: It is a six-week course, so you should analyze, design, complete, and write the final
report and PowerPoint presentation in six weeks in order to obtain the c ...
Final projects
The document outlines guidelines for an end semester examination on working capital management. It includes 5 questions - the first two questions ask about credit policy and its elements, and the different
asi-er-template.pdf
This document provides instructions and a template for Exploratory Research proposals at Los Alamos National Laboratory, with the exception of Engineering proposals. It details the required sections and formatting, including page limits and fonts. Key sections are Research Goals, Background & Significance, R&D Approach, Expected Results, Schedule and Milestones, and Mission Relevance & Program Development Plan. Graphics are encouraged to illustrate concepts. Strict adherence to the template is required, and contact information is provided for questions.
Similar to Assignment - Building Services 1 (20)
Ash edu 675 week 6 final project action research formal presentation of findi...
Ash edu 675 week 6 final project action research formal presentation of findi...
Course Expectations/Important Handbook Information
Course Expectations/Important Handbook Information
Ash edu 675 week 6 final project action research formal presentation of findi...
Ash edu 675 week 6 final project action research formal presentation of findi...
Ash edu 675 week 6 final project action research formal presentation of findi...
Ash edu 675 week 6 final project action research formal presentation of findi...
How to make a project report for schools, colleges, universities, researchers...
How to make a project report for schools, colleges, universities, researchers...
Dissertation Structure GuidelinesIt will be important to set
Dissertation Structure GuidelinesIt will be important to set
1 London School of Business & Management QCF L.docx
1 London School of Business & Management QCF L.docx
EEECSE 120 Answer SheetCapstone Design Project .docx
EEECSE 120 Answer SheetCapstone Design Project .docx
Management Information System Practice Orientations abou.docx
Management Information System Practice Orientations abou.docx
More from Kai Yun Pang
Assignment 2 - Resort Proposal at Pulau Langkawi
The document provides details of a proposed resort project at Pulau Langkawi, Malaysia. It includes a group of 6 students who prepared the report, the table of contents, and an introduction that gives background on the project site and land. Sections cover the proposed design, procurement management, time management, cost estimation, quality management, risk management, and environmental protection management for the resort project.
Assignment 2 - Report
This document outlines a group project for a Bachelor of Quantity Surveying course. Students will visit Pulau Langkawi or the alternative site of Pulau Ketam to observe and analyze the islands. They must then prepare a business proposal as an investor seeking to build a resort, covering items such as project background, design, time and cost estimates, quality and risk management, and environmental protection. Upon completion, students will submit a written report and presentation, gaining hands-on experience assessing a project site and understanding an investor's role and responsibilities. The goal is for students to research and propose suggestions for improving any resort development plans.
Assignment 1 - Water Pump Station
The document outlines the tasks, durations, and schedule for constructing a water pump station over 279 days. Key steps include:
1. Applying for permits over 27 days and clearing/preparing the site over 7 days.
2. Installing sheet piles over 18 days to prevent soil collapse during the 90-day excavation period.
3. Pouring the concrete mat foundation and inverse slab over 43 days after erecting formwork and reinforcement bars over 10 days. The foundation will cure for 7 days before dismantling forms over 8 days.
4. Constructing the heavy wall from elevation 72 to 95 feet over 28 days, including forming, reinforcing, pouring, and curing concrete sections.
Assignment 1 - Microsoft Project
The document outlines the schedule and dependencies for tasks in building a water pump station project. Key tasks include obtaining permits, installing utilities, driving sheet piles, excavation and tiebacks over 90 days, pouring the foundation and slab over 43 days, and constructing and waterproofing the walls. The individual is asked to build a precedence table and solve the initial network in MS Project, listing assumptions and identifying the critical path and Gantt chart.
Assignment - Financial Appraisal
This document outlines a group assignment for a development economics course. It includes details of the proposed development such as land size, number and type of units, and a financial appraisal. The development will include shop/office, terrace, and low-cost housing units totaling 164 units. The financial appraisal estimates construction costs, administrative costs, financing costs, and gross profit. Cash flow projections are provided for a "sell-then-build" approach, with monthly sales and construction progress outlined over a 12 month period.
Assignment - Financial Appraisal
The document provides information about a proposed mixed development project in Rawang, Selangor. It will consist of 26' x 80' double-storey shop/office lots, 22' x 75' double-storey terrace houses, and 20' x 60' double-storey low cost houses. Thirty percent of the development must be low cost houses, and fifteen percent must be shop/office lots. The developer obtained a loan to purchase the land three years ago and has since received development approvals. As the cost consultant, you must analyze the development, provide a financial appraisal using the residue method, and cash flow analysis under sell-then-build and build-then-sell concepts.
Assignment - FIDIC Contract
This document provides a group assignment analyzing the appropriate form of FIDIC contract for a construction project. It recommends using the FIDIC Red Book based on the client's requirements, including having full control of design and ability to make changes. Payment will be based on bills of quantities. The Red Book best fits the traditional procurement method preferred by the client and covers conditions regarding payment, contractual programming, termination, and dispute resolution relevant for the project.
Assignment - Report
The Vice-Chancellor of the Construction Management University is planning a RM400 million construction project to build a new Postgraduate Student Accommodation and Outreach Centre. A group of students has been assigned a project to advise the Vice-Chancellor on various legal and contractual issues regarding the project. Specifically, the students must propose an appropriate FIDIC form of contract for the project, analyze payment conditions, contractual programming, termination conditions, and dispute resolution methods in the chosen FIDIC contract. The students must also compare their analysis of the chosen FIDIC contract to either the PAM or JKR standard forms of contract. The report should not exceed 3000 words and is due by November 21st, 2018 for a grade worth
Seminar - CIPAA 2012
This document provides an overview of the Construction Industry Payment and Adjudication Act 2012 (CIPAA) in Malaysia. It discusses what CIPAA is, its main objectives to provide timely payment and dispute resolution in the construction industry, and the adjudication process for resolving payment disputes. Key points covered include that adjudication decisions are temporarily binding pending final resolution by arbitration or courts, KLRCA oversees the adjudication process and determines adjudicator standards and fees, and possible impacts of CIPAA include its long time frames compromising timely payment and respondents sometimes being disadvantaged.
Assignment - S Hotel (Presentation Slide)
Value management was conducted on an 11-storey hotel project that was 35% through the design stage. The 5-day workshop identified unnecessary costs and proposed alternative design solutions to improve value without affecting performance. Tools like fast diagrams, compound approaches, and cost reduction approaches were used. Space function analysis identified potential changes like enlarging the dining area. A priority matrix assessed options like changing to sound insulated doors and using precast hollow core slabs. Cost analysis found potential savings from proposals such as eliminating skylights and changing to LED lights. The value management study concluded identifying client requirements early improves value and is highly recommended.
Assignment - S Hotel
The value management study identified three key objectives: consider life cycle costs, increase building efficiency, and eliminate unnecessary functions. Various value management tools were used, including FAST diagrams and space functional analysis. This led to proposals like changing to precast hollow core slabs to reduce costs and solid wood doors in guest rooms to improve sound insulation. The study aimed to increase value for money for the hotel project while meeting budget constraints.
Assignment - Case Study Report
This document provides an assignment brief for a case study report on implementing value management in a construction project. Students are to prepare a value management study report on a chosen project. The report should include: an introduction outlining the primary purpose of the value management study, an executive summary of the project under study including a brief description and problem summary and the type of value management study undertaken. It also requires the results of any functional analysis or value management tools used, sketches showing proposed design changes, supporting technical data for alternatives, a cost plan or analysis, and an action plan to implement recommendations along with a conclusion and recommendations. The completed case study report and presentation are due by November 19th and will account for 30% of the total exam
Assignment - Journal
The document provides details of a student's community service project at an orphanage. It includes an introduction to the project, organization charts, timelines, meeting minutes, and descriptions of pre-event planning activities. The student and their peers visited Good Samaritan Homes orphanage in Klang, Malaysia to organize activities for the children living there. They divided responsibilities among teams and fundraised donations. The high-level purpose was for the students to conduct a meaningful community service activity and gain experience through engaging with the orphanage.
Assignment - Community Service
This document outlines a community service initiative for architecture students. It involves splitting 70 students into two groups to volunteer at an orphanage home or participate in experiential activities. Students will take on roles to plan and run role-playing games and career exposure activities for children ages 7-15. The 12-week project timeline includes selecting a beneficiary group, planning activities and games, preparing materials, the service visit, and presentations reflecting on the experience. Suggestions include preparing questionnaires and career information for the children.
Assignment - Final Account
This document contains a group assignment for a course on professional practice. It provides background on the group members and instructor. It then lists 4 questions for the assignment. Question 1 asks students to prepare a report explaining adjustments needed for the final account of a construction project. Question 2 asks about contractual implications of omitting an item from the tender document. Question 3 requires students to assess a contractor's final account application and prepare the final account based on provided valuations and adjustments. Question 4 asks students to explain how various variations would be finalized and priced in a final account.
Assignment - Report
This document contains information for a coursework assignment on preparing a final account for an apartment construction project. It provides background on the contract sum and nominated subcontractors' accounts. It also lists 4 questions for the assignment:
1) Explain adjustments needed for the final account;
2) Discuss implications of omitting an entrance porch from tender documents;
3) Complete the final account based on provided valuations and adjustments;
4) Explain how various variations would be finalized, including issues with insurance, computer equipment, a wash trough, and excavation rates.
Seminar - Partial Possession by Employer
Here are the key differences between Sectional Completion and Partial Possession:
Sectional Completion:
- Refers to completing different sections or phases of the overall works separately based on pre-agreed sectional completion dates.
- Allows the contractor to achieve practical completion for different sections at different times.
- Each section is treated as a separate contract with its own DLP, retention sums, etc.
Partial Possession:
- Refers to the employer taking possession of part of the completed works before overall practical completion.
- Can be done with or without the contractor's consent under certain conditions.
- The occupied part is deemed practically complete but the overall works contract remains.
- Effects like reduced
Seminar - Question
This document outlines the requirements for a group presentation assignment in a professional practice course. It will make up 15% of the final grade. Students will be assigned to groups of 3 and each group must do a 15 minute presentation on one of six topics related to quantity surveying, followed by a discussion of questions. Topics include construction disputes, delays and disputes, construction claims, partial possession by the employer, rights of setting off by the employer, and practical completion and penultimate certificate. The presentation will be assessed based on content, teamwork, organization, presentation skills, and handling of questions.
Assignment - MK Land
MK Land Holdings Berhad operates in multiple business segments including property development, leisure, education, and investment holding. It has developed various residential and commercial properties across Selangor, Perak, and Kedah. The company's leisure properties include hotels, resorts, and golf courses catering to domestic and international tourists. MK Land has also expanded into the education sector by establishing Lake View College, which offers diploma programs in nursing, occupational safety and health, and environment health. Property development remains the largest contributor to the company's revenue, with affordable housing comprising 65% of developed units. The company aims to continue growing its business across segments.
Assignment - Financial Analysis
The document provides guidelines for a group assignment to analyze the financial strength of MK Land Holdings Berhad, a property development company listed on Bursa Malaysia. Students are required to write a report not exceeding 3,000 words that includes: (1) a background of MK Land and its business segments, (2) an industry analysis, (3) an evaluation of MK Land's financial performance over the past three years using 17 financial ratios, and (4) conclusions and recommendations.
More from Kai Yun Pang (20)
Recently uploaded
The Diamonds of 2023-2024 in the IGRA collection
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশের অর্থনৈতিক সমীক্ষা ২০২৪ [Bangladesh Economic Review 2024 Bangla.pdf] কম্পিউটার , ট্যাব ও স্মার্ট ফোন ভার্সন সহ সম্পূর্ণ বাংলা ই-বুক বা pdf বই " সুচিপত্র ...বুকমার্ক মেনু 🔖 ও হাইপার লিংক মেনু 📝👆 যুক্ত ..
আমাদের সবার জন্য খুব খুব গুরুত্বপূর্ণ একটি বই ..বিসিএস, ব্যাংক, ইউনিভার্সিটি ভর্তি ও যে কোন প্রতিযোগিতা মূলক পরীক্ষার জন্য এর খুব ইম্পরট্যান্ট একটি বিষয় ...তাছাড়া বাংলাদেশের সাম্প্রতিক যে কোন ডাটা বা তথ্য এই বইতে পাবেন ...
তাই একজন নাগরিক হিসাবে এই তথ্য গুলো আপনার জানা প্রয়োজন ...।
বিসিএস ও ব্যাংক এর লিখিত পরীক্ষা ...+এছাড়া মাধ্যমিক ও উচ্চমাধ্যমিকের স্টুডেন্টদের জন্য অনেক কাজে আসবে ...
How to Build a Module in Odoo 17 Using the Scaffold Method
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
This Dissertation explores the particular circumstances of Mirzapur, a region located in the
core of India. Mirzapur, with its varied terrains and abundant biodiversity, offers an optimal
environment for investigating the changes in vegetation cover dynamics. Our study utilizes
advanced technologies such as GIS (Geographic Information Systems) and Remote sensing to
analyze the transformations that have taken place over the course of a decade.
The complex relationship between human activities and the environment has been the focus
of extensive research and worry. As the global community grapples with swift urbanization,
population expansion, and economic progress, the effects on natural ecosystems are becoming
more evident. A crucial element of this impact is the alteration of vegetation cover, which plays a
significant role in maintaining the ecological equilibrium of our planet.Land serves as the foundation for all human activities and provides the necessary materials for
these activities. As the most crucial natural resource, its utilization by humans results in different
'Land uses,' which are determined by both human activities and the physical characteristics of the
land.
The utilization of land is impacted by human needs and environmental factors. In countries
like India, rapid population growth and the emphasis on extensive resource exploitation can lead
to significant land degradation, adversely affecting the region's land cover.
Therefore, human intervention has significantly influenced land use patterns over many
centuries, evolving its structure over time and space. In the present era, these changes have
accelerated due to factors such as agriculture and urbanization. Information regarding land use and
cover is essential for various planning and management tasks related to the Earth's surface,
providing crucial environmental data for scientific, resource management, policy purposes, and
diverse human activities.
Accurate understanding of land use and cover is imperative for the development planning
of any area. Consequently, a wide range of professionals, including earth system scientists, land
and water managers, and urban planners, are interested in obtaining data on land use and cover
changes, conversion trends, and other related patterns. The spatial dimensions of land use and
cover support policymakers and scientists in making well-informed decisions, as alterations in
these patterns indicate shifts in economic and social conditions. Monitoring such changes with the
help of Advanced technologies like Remote Sensing and Geographic Information Systems is
crucial for coordinated efforts across different administrative levels. Advanced technologies like
Remote Sensing and Geographic Information Systems
9
Changes in vegetation cover refer to variations in the distribution, composition, and overall
structure of plant communities across different temporal and spatial scales. These changes can
occur natural.
How to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Librarians are leading the way in creating future-ready citizens – now we need to update our spaces to match. In this session, attendees will get inspiration for transforming their library spaces. You’ll learn how to survey students and patrons, create a focus group, and use design thinking to brainstorm ideas for your space. We’ll discuss budget friendly ways to change your space as well as how to find funding. No matter where you’re at, you’ll find ideas for reimagining your space in this session.
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcExploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaChapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
PCOS corelations and management through Ayurveda.
This presentation includes basic of PCOS their pathology and treatment and also Ayurveda correlation of PCOS and Ayurvedic line of treatment mentioned in classics.
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneHow to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
Leveraging Generative AI to Drive Nonprofit Innovation
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
Recently uploaded (20)
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
বাংলাদেশ অর্থনৈতিক সমীক্ষা (Economic Review) ২০২৪ UJS App.pdf
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Build a Module in Odoo 17 Using the Scaffold Method
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
LAND USE LAND COVER AND NDVI OF MIRZAPUR DISTRICT, UP
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Reimagining Your Library Space: How to Increase the Vibes in Your Library No ...
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
Leveraging Generative AI to Drive Nonprofit Innovation
Leveraging Generative AI to Drive Nonprofit Innovation
Assignment - Building Services 1
- 1. SCHOOL OF ARCHITECTURE. BUILDING. DESIGN Centre for Modern Architecture Studies in Southeast Asia Bachelor of Quantity Surveying (Honours) BUILDING SERVICES 1 [BLD 60403] ____________________________________________________________ Assignment (Group Project) Submission date: Week 12 (21st June 2016) __________________________________________________________________ Assessment brief Objectives • To extend and refine knowledge relating to the building services technology and the management system. • To develop students understanding of course materials and the current application in construction industry. • Developing higher-order intellectual skills – evaluating skills and critical thinking skills • Encourage knowledge sharing about subject taught Learning Outcomes Upon successful completion of the subject, students will be able to: • Understand and explain relevant information related to the selected case study. • Identify the application, system, installation, process, benefits, problems and anything relevant to support the documentation. Project: • This project is a study on building services system with the selected topics such as ventilation system, telecommunication, storm water system, cold water supply and hot water supply. • Students are required to carry out own research study based on given topic supported by at least one case study either in local or oversea. In group of students, you are required to prepare one of the topics within the existing topic below: 1. Sustainable Wastewater Treatment 2. Energy Efficient Ventilation System 3. Building Integration of Solar Energy
- 2. 4. Water Treatment for Domestic Water Supplies 5. Ventilation Problem in Heritage Building 6. Energy Efficient in Heritage Building 7. Telecommunication Service for High Rise Building 8. Sustainable Storm-water Management 9. Indoor Environmental Quality in Healthcare/Office 10. The installation of Hot Water Supply for Hotel/Corporate Building • You are required to carry out survey on the selected topic, and prepare a documentation report. You are required to explain the application, system, installation process, benefits, problems and anything relevant to support the documentation. • You also encouraged highlighting the recommendations for future improvement. Submission Requirement: Documentation& Presentation • A4 bound report complete with visual and photographs inclusive of detailing and documentation of your project. • Word processed, font size 11, Arial, 1.5 spacing, justify and not less than 4500 words (excluding the cover page and appendices) • Visual/photographs used in the submission must be clear and well communicated. • Assumptions can be made through references from books/drawings are allowed. DO NOT PLAGIARISE. Application must be according to selected topic context. • Softcopy is required to be attached with the hardcopy. FORMAT of A4 report/Documentation 1. Cover page – Name and student ID number should be written clearly (TU logo) 2. Table of content 3. Introduction of selected topic 4. Installation process (if applicable) 5. Management system (if applicable) 6. The advantages and Disadvantages 7. Case study: Finding and Explanation 8. Possible problems to the system (if applicable) 9. Recommendations for future improvement 10. Learning from the group work project 11. References (alphabetical order) 12. Bibliography (alphabetical order) 13. Appendices Assessment Criteria The assessment for this project will be based on your:- • Demonstrated understanding of the project brief • Quality and clarity of the documented drawings/photographs and detailing of the system • Materiality and richness of contents • Clear visual and written communication of your understanding of the project • Appropriate use of drawings/photographs standard e.g. symbols/profiling, label and specifications.