Assembler numericals by aniket bhute
•Download as PPTX, PDF•
0 likes•596 views
The program makes a symbol table, literal table, and base table for the given assembly language statements. It then shows the generated machine code instructions with their locations. The symbol table contains symbols and their values. The literal table contains literals and their values. The base table shows the base register contents after key statements.
Report
Share
Report
Share
Recommended
Macro Processor
The document discusses macro language and macro processors. It defines macros as single line abbreviations for blocks of code that allow programmers to avoid repetitively writing the same code. It describes key aspects of macro processors including macro definition, macro calls, macro expansion, macro arguments, and conditional macro expansion. Implementation of macro processors involves recognizing macro definitions, saving the definitions, recognizing macro calls, and replacing the calls with the corresponding macro body.
System Programming- Unit I
The document discusses machine structure and system programming. It begins with an overview of system software components like assemblers, loaders, macros, compilers and formal systems. It then describes the general machine structure including CPU, memory and I/O channels. Specific details are provided about the IBM 360 machine structure including its memory, registers, data, instructions and special features. Machine language and different approaches to writing machine language programs are also summarized.
MACRO PROCESSOR
This document discusses macros and macro processing. It defines macros as units of code abbreviation that are expanded during compilation. The macro processor performs two passes: pass 1 reads macros and stores them in a table, pass 2 expands macros by substituting actual parameters. Advanced features like conditional expansion and looping are enabled using statements like AIF, AGO, and ANOP. Nested macro calls follow a LIFO expansion order.
Assembler Numerical in system programming
This document discusses assembler programming and 2-pass assembler algorithms. It provides example assembly language code and uses a 2-pass assembler approach to generate the symbol table, literal table, base table, and machine code for each example. Five questions are included with example AL code and the full solution showing the tables and machine code generated by the 2-pass assembler.
System Programming Unit II
A macro processor allows programmers to define macros, which are single line abbreviations for blocks of code. The macro processor performs macro expansion by replacing macro calls with the corresponding block of instructions defined in the macro. It uses a two pass approach, where the first pass identifies macro definitions and saves them to a table, and the second pass identifies macro calls and replaces them with the defined code, substituting any arguments.
System Programming :: Assembler
Introduction to System Programming. Various Components of System Software. Design of 2 Pass Assembler.
Assemblers
This document discusses assembly language and assemblers. It begins by explaining that assembly language provides a more readable and convenient way to program compared to machine language. It then describes how an assembler works, translating assembly language programs into machine code. The elements of assembly language are defined, including mnemonic operation codes, symbolic operands, and data declarations. The document also covers instruction formats, sample assembly language programs, and the processing an assembler performs to generate machine code from assembly code.
Two pass Assembler
Its an complete presentation of how two pass assembler works,two pass assembler program,comparison between one pass and two pass.
Recommended
Macro Processor
The document discusses macro language and macro processors. It defines macros as single line abbreviations for blocks of code that allow programmers to avoid repetitively writing the same code. It describes key aspects of macro processors including macro definition, macro calls, macro expansion, macro arguments, and conditional macro expansion. Implementation of macro processors involves recognizing macro definitions, saving the definitions, recognizing macro calls, and replacing the calls with the corresponding macro body.
System Programming- Unit I
The document discusses machine structure and system programming. It begins with an overview of system software components like assemblers, loaders, macros, compilers and formal systems. It then describes the general machine structure including CPU, memory and I/O channels. Specific details are provided about the IBM 360 machine structure including its memory, registers, data, instructions and special features. Machine language and different approaches to writing machine language programs are also summarized.
MACRO PROCESSOR
This document discusses macros and macro processing. It defines macros as units of code abbreviation that are expanded during compilation. The macro processor performs two passes: pass 1 reads macros and stores them in a table, pass 2 expands macros by substituting actual parameters. Advanced features like conditional expansion and looping are enabled using statements like AIF, AGO, and ANOP. Nested macro calls follow a LIFO expansion order.
Assembler Numerical in system programming
This document discusses assembler programming and 2-pass assembler algorithms. It provides example assembly language code and uses a 2-pass assembler approach to generate the symbol table, literal table, base table, and machine code for each example. Five questions are included with example AL code and the full solution showing the tables and machine code generated by the 2-pass assembler.
System Programming Unit II
A macro processor allows programmers to define macros, which are single line abbreviations for blocks of code. The macro processor performs macro expansion by replacing macro calls with the corresponding block of instructions defined in the macro. It uses a two pass approach, where the first pass identifies macro definitions and saves them to a table, and the second pass identifies macro calls and replaces them with the defined code, substituting any arguments.
System Programming :: Assembler
Introduction to System Programming. Various Components of System Software. Design of 2 Pass Assembler.
Assemblers
This document discusses assembly language and assemblers. It begins by explaining that assembly language provides a more readable and convenient way to program compared to machine language. It then describes how an assembler works, translating assembly language programs into machine code. The elements of assembly language are defined, including mnemonic operation codes, symbolic operands, and data declarations. The document also covers instruction formats, sample assembly language programs, and the processing an assembler performs to generate machine code from assembly code.
Two pass Assembler
Its an complete presentation of how two pass assembler works,two pass assembler program,comparison between one pass and two pass.
Compiler Design Unit 4
This document discusses runtime environments and storage allocation strategies. It covers:
- How procedure activations are represented at runtime using activation records, control stacks, and activation trees. Activation records store local variables, parameters, return values, and more.
- Different strategies for allocating storage at runtime, including static allocation where sizes are known at compile time, stack allocation for procedure activations and recursion, and heap allocation for dynamic memory.
- How names are bound to values at compile time through environments and at runtime through states. The scope and lifetime of bindings are also discussed.
- Issues related to mapping names to storage locations and values at runtime, including how assignments change the state but not the environment.
-
Unit 3
The document discusses linkers, loaders, and software tools. It defines loaders as programs that accept object codes and prepare them for execution by performing tasks like allocation, linking, relocation, and loading. There are different types of loaders discussed, including absolute loaders, relocating loaders, and direct linking loaders. The direct linking loader uses a two-pass process and object modules divided into external symbol directory, assembled program, relocation directory, and end sections. The document also describes the object record formats used by the MS-DOS linker.
Assemblers: Ch03
The document discusses the design of an assembler. It begins by outlining the general design procedure, which includes specifying the problem, defining data structures like symbol tables and opcode tables, specifying data formats, and specifying algorithms. It then discusses the specific design of an assembler, including stating the problem, defining data structures like symbol tables and opcode tables, specifying table formats, and looking for modularity. Finally, it provides an example assembly language program and discusses how the assembler would process it using the defined data structures and tables during its first and second passes.
Unit 3 sp assembler
Assemblers Elements of Assembly Language Programming, Design of the Assembler, Assembler Design Criteria, Types of Assemblers, Two-Pass Assemblers, One-Pass Assemblers, Single pass Assembler for Intel x86 , Algorithm of Single Pass Assembler, Multi-Pass Assemblers, Advanced Assembly Process, Variants of Assemblers Design of two pass assembler
Unit 4 sp macro
Introduction, Macro Definition and Call, Macro Expansion, Nested Macro Calls, Advanced Macro Facilities, Design Of a Macro Preprocessor, Design of a Macro Assembler, Functions of a Macro Processor, Basic Tasks of a Macro Processor, Design Issues of Macro Processors, Features, Macro Processor Design Options, Two-Pass Macro Processors, One-Pass Macro Processors
Examinable Question and answer system programming
This document provides information about systems programming and assembly language concepts. It contains definitions of systems software and application programs. It also describes the basic components of a computer including the microprocessor, memory, I/O devices, and system bus. Finally, it explains concepts related to assembly language programming such as addressing modes, directives, and the control unit of the CPU.
Direct linking loaders
The document summarizes the key aspects of direct linking loaders. A direct linking loader allows for multiple procedure and data segments and flexible intersegment referencing. It provides assembler output with the length and symbol tables (USE and DEFINITION) to the loader. The loader performs two passes, building a Global External Symbol Table in Pass 1 and performing relocation and linking in Pass 2 using the object decks with External Symbol Dictionary, instructions/data, and relocation/linkage sections. This allows combining and executing object code from separate object programs.
Loaders
A loader is a system program that loads programs into memory for execution. It performs functions like allocation of memory space, loading code and data into memory, relocation of code to adjust for different memory locations, and linking of subprograms. Loaders can be of different types like absolute, relocating, and direct linking loaders. A bootstrap loader is needed to initially load the operating system after self-tests.
Ch 3 Assembler in System programming
This presentation is about 1-pass and 2-pass assembler.This is helps to find out working of assembler. It have very good graphics.
Ch8 (1) morris mano
This document discusses the organization of registers and stacks in a CPU. It describes how a CPU contains a register set that is used to store intermediate values and pointers to improve efficiency over memory access. A general register organization is shown using multiplexers and decoders to select registers for arithmetic operations. The document also introduces the concept of a stack, which uses a last-in, first-out data structure and stack pointer register to efficiently insert and delete items for functions.
Macro-processor
A macro processor is a system software. Macro is that the Section of code that the programmer writes (defines) once, and then can use or invokes many times.
System Programing Unit 1
System programming involves designing and implementing system programs like operating systems, compilers, linkers, and loaders that allow user programs to run efficiently on a computer system. A key part of system programming is developing system software like operating systems, assemblers, compilers, and debuggers. An operating system acts as an interface between the user and computer hardware, managing processes, memory, devices, and files. Assemblers and compilers translate programs into machine-readable code. Loaders place object code into memory for execution. System programming optimizes computer system performance and resource utilization.
Instruction cycle with interrupts
An instruction tells the CPU to perform an operation by storing bits of code in memory that are read into the instruction register. Instructions are executed in three phases: fetching the instruction from memory, decoding what operation it specifies, and then executing it, which may involve reading an effective address or performing an input/output operation. Memory reference, register reference, and input/output instructions allow the CPU to access different parts of the computer's architecture during the instruction cycle.
Register organization, stack
In these slides the registration organization and stack organization have discussed in detail. Stack organization is discussed with the aid of animation to let the user understand it in a better and easy way.
Fuzzy Logic
The slides help you to get information about FUZZY LOGIC its advantages uses and all those types of things...
Addressing modes
The document discusses different addressing modes used in microprocessors, including the 8086. It describes five main addressing modes: immediate, register, direct, register indirect, and implicit. Immediate addressing uses data contained in the instruction itself. Register addressing uses operands in registers. Direct addressing directly specifies a memory location. Register indirect addressing uses a memory location pointed to by a register pair. Implicit addressing hides the operand in the instruction. The document provides examples of instructions that use each addressing mode.
First order logic
This document provides an overview of first-order logic in artificial intelligence:
- First-order logic extends propositional logic by adding objects, relations, and functions to represent knowledge. Objects can include people and numbers, while relations include concepts like "brother of" and functions like "father of".
- A sentence in first-order logic contains a predicate and a subject, represented by a variable. For example, "tall(John)" asserts that John is tall. Quantifiers like "forall" and "exists" are used to structure sentences.
- First-order logic contains constants, variables, predicates, functions, connectives, equality, and quantifiers as its basic elements.
05 instruction set design and architecture
This document summarizes key aspects of instruction set architecture (ISA) design. It discusses different classifications of ISAs such as accumulator, stack-based, memory-memory, register-memory, and load-store architectures. It also covers operand locations, types of addressing modes, operations, and evolution of instruction sets. The document concludes by previewing that the next topic will cover the MIPS instruction set as a case study.
Pass 1 flowchart
1) Pass 1 processes macro definitions by reading source code cards and entering macro names, parameters, and lines into a Macro Definition Table (MDT).
2) Pass 2 processes macro calls by searching for macro names in source code, expanding the macros by retrieving lines from the MDT and substituting arguments, and writing the expanded source code to a new file.
3) The process repeats until all macros are expanded.
Compiler Design Unit 5
The document discusses code optimization and code generation in compilers. It covers the position of a code generator in the compiler model, code generation, the target machine architecture, instruction selection, register allocation, basic blocks, control flow graphs, common subexpression elimination, dead code elimination, and next-use information. The target machine has registers, instructions with opcodes and addressing modes, and a simple cost model. Code optimization aims to efficiently map source code to the target instruction set architecture.
Basic computer organization design
This document discusses the basic organization and design of computers. It covers topics such as instruction codes, computer registers, instructions, timing and control, memory reference instructions, and input-output and interrupt handling. The key aspects covered are:
- Instruction codes specify operations through opcode fields and addressing modes like immediate, direct, and indirect.
- The basic computer contains registers like the accumulator, address register, instruction register, and program counter.
- Memory reference instructions include load, store, branch, and increment instructions that access operands from memory.
- Timing and control circuits use a sequence counter and decoder to generate control signals for instruction fetch and execution cycles.
- Input-output instructions allow transferring data
1.pdf
This document provides an appendix with information about the 8085 instruction set, including a table that lists each instruction opcode and a brief description. It includes sections on data transfer instructions, arithmetic instructions, logical instructions, branching instructions, I/O instructions, stack and machine control instructions, and interrupt control and processor control instructions. Tables are also provided that list the instruction set grouped by opcode and clock cycles.
More Related Content
What's hot
Compiler Design Unit 4
This document discusses runtime environments and storage allocation strategies. It covers:
- How procedure activations are represented at runtime using activation records, control stacks, and activation trees. Activation records store local variables, parameters, return values, and more.
- Different strategies for allocating storage at runtime, including static allocation where sizes are known at compile time, stack allocation for procedure activations and recursion, and heap allocation for dynamic memory.
- How names are bound to values at compile time through environments and at runtime through states. The scope and lifetime of bindings are also discussed.
- Issues related to mapping names to storage locations and values at runtime, including how assignments change the state but not the environment.
-
Unit 3
The document discusses linkers, loaders, and software tools. It defines loaders as programs that accept object codes and prepare them for execution by performing tasks like allocation, linking, relocation, and loading. There are different types of loaders discussed, including absolute loaders, relocating loaders, and direct linking loaders. The direct linking loader uses a two-pass process and object modules divided into external symbol directory, assembled program, relocation directory, and end sections. The document also describes the object record formats used by the MS-DOS linker.
Assemblers: Ch03
The document discusses the design of an assembler. It begins by outlining the general design procedure, which includes specifying the problem, defining data structures like symbol tables and opcode tables, specifying data formats, and specifying algorithms. It then discusses the specific design of an assembler, including stating the problem, defining data structures like symbol tables and opcode tables, specifying table formats, and looking for modularity. Finally, it provides an example assembly language program and discusses how the assembler would process it using the defined data structures and tables during its first and second passes.
Unit 3 sp assembler
Assemblers Elements of Assembly Language Programming, Design of the Assembler, Assembler Design Criteria, Types of Assemblers, Two-Pass Assemblers, One-Pass Assemblers, Single pass Assembler for Intel x86 , Algorithm of Single Pass Assembler, Multi-Pass Assemblers, Advanced Assembly Process, Variants of Assemblers Design of two pass assembler
Unit 4 sp macro
Introduction, Macro Definition and Call, Macro Expansion, Nested Macro Calls, Advanced Macro Facilities, Design Of a Macro Preprocessor, Design of a Macro Assembler, Functions of a Macro Processor, Basic Tasks of a Macro Processor, Design Issues of Macro Processors, Features, Macro Processor Design Options, Two-Pass Macro Processors, One-Pass Macro Processors
Examinable Question and answer system programming
This document provides information about systems programming and assembly language concepts. It contains definitions of systems software and application programs. It also describes the basic components of a computer including the microprocessor, memory, I/O devices, and system bus. Finally, it explains concepts related to assembly language programming such as addressing modes, directives, and the control unit of the CPU.
Direct linking loaders
The document summarizes the key aspects of direct linking loaders. A direct linking loader allows for multiple procedure and data segments and flexible intersegment referencing. It provides assembler output with the length and symbol tables (USE and DEFINITION) to the loader. The loader performs two passes, building a Global External Symbol Table in Pass 1 and performing relocation and linking in Pass 2 using the object decks with External Symbol Dictionary, instructions/data, and relocation/linkage sections. This allows combining and executing object code from separate object programs.
Loaders
A loader is a system program that loads programs into memory for execution. It performs functions like allocation of memory space, loading code and data into memory, relocation of code to adjust for different memory locations, and linking of subprograms. Loaders can be of different types like absolute, relocating, and direct linking loaders. A bootstrap loader is needed to initially load the operating system after self-tests.
Ch 3 Assembler in System programming
This presentation is about 1-pass and 2-pass assembler.This is helps to find out working of assembler. It have very good graphics.
Ch8 (1) morris mano
This document discusses the organization of registers and stacks in a CPU. It describes how a CPU contains a register set that is used to store intermediate values and pointers to improve efficiency over memory access. A general register organization is shown using multiplexers and decoders to select registers for arithmetic operations. The document also introduces the concept of a stack, which uses a last-in, first-out data structure and stack pointer register to efficiently insert and delete items for functions.
Macro-processor
A macro processor is a system software. Macro is that the Section of code that the programmer writes (defines) once, and then can use or invokes many times.
System Programing Unit 1
System programming involves designing and implementing system programs like operating systems, compilers, linkers, and loaders that allow user programs to run efficiently on a computer system. A key part of system programming is developing system software like operating systems, assemblers, compilers, and debuggers. An operating system acts as an interface between the user and computer hardware, managing processes, memory, devices, and files. Assemblers and compilers translate programs into machine-readable code. Loaders place object code into memory for execution. System programming optimizes computer system performance and resource utilization.
Instruction cycle with interrupts
An instruction tells the CPU to perform an operation by storing bits of code in memory that are read into the instruction register. Instructions are executed in three phases: fetching the instruction from memory, decoding what operation it specifies, and then executing it, which may involve reading an effective address or performing an input/output operation. Memory reference, register reference, and input/output instructions allow the CPU to access different parts of the computer's architecture during the instruction cycle.
Register organization, stack
In these slides the registration organization and stack organization have discussed in detail. Stack organization is discussed with the aid of animation to let the user understand it in a better and easy way.
Fuzzy Logic
The slides help you to get information about FUZZY LOGIC its advantages uses and all those types of things...
Addressing modes
The document discusses different addressing modes used in microprocessors, including the 8086. It describes five main addressing modes: immediate, register, direct, register indirect, and implicit. Immediate addressing uses data contained in the instruction itself. Register addressing uses operands in registers. Direct addressing directly specifies a memory location. Register indirect addressing uses a memory location pointed to by a register pair. Implicit addressing hides the operand in the instruction. The document provides examples of instructions that use each addressing mode.
First order logic
This document provides an overview of first-order logic in artificial intelligence:
- First-order logic extends propositional logic by adding objects, relations, and functions to represent knowledge. Objects can include people and numbers, while relations include concepts like "brother of" and functions like "father of".
- A sentence in first-order logic contains a predicate and a subject, represented by a variable. For example, "tall(John)" asserts that John is tall. Quantifiers like "forall" and "exists" are used to structure sentences.
- First-order logic contains constants, variables, predicates, functions, connectives, equality, and quantifiers as its basic elements.
05 instruction set design and architecture
This document summarizes key aspects of instruction set architecture (ISA) design. It discusses different classifications of ISAs such as accumulator, stack-based, memory-memory, register-memory, and load-store architectures. It also covers operand locations, types of addressing modes, operations, and evolution of instruction sets. The document concludes by previewing that the next topic will cover the MIPS instruction set as a case study.
Pass 1 flowchart
1) Pass 1 processes macro definitions by reading source code cards and entering macro names, parameters, and lines into a Macro Definition Table (MDT).
2) Pass 2 processes macro calls by searching for macro names in source code, expanding the macros by retrieving lines from the MDT and substituting arguments, and writing the expanded source code to a new file.
3) The process repeats until all macros are expanded.
Compiler Design Unit 5
The document discusses code optimization and code generation in compilers. It covers the position of a code generator in the compiler model, code generation, the target machine architecture, instruction selection, register allocation, basic blocks, control flow graphs, common subexpression elimination, dead code elimination, and next-use information. The target machine has registers, instructions with opcodes and addressing modes, and a simple cost model. Code optimization aims to efficiently map source code to the target instruction set architecture.
What's hot (20)
Similar to Assembler numericals by aniket bhute
Basic computer organization design
This document discusses the basic organization and design of computers. It covers topics such as instruction codes, computer registers, instructions, timing and control, memory reference instructions, and input-output and interrupt handling. The key aspects covered are:
- Instruction codes specify operations through opcode fields and addressing modes like immediate, direct, and indirect.
- The basic computer contains registers like the accumulator, address register, instruction register, and program counter.
- Memory reference instructions include load, store, branch, and increment instructions that access operands from memory.
- Timing and control circuits use a sequence counter and decoder to generate control signals for instruction fetch and execution cycles.
- Input-output instructions allow transferring data
1.pdf
This document provides an appendix with information about the 8085 instruction set, including a table that lists each instruction opcode and a brief description. It includes sections on data transfer instructions, arithmetic instructions, logical instructions, branching instructions, I/O instructions, stack and machine control instructions, and interrupt control and processor control instructions. Tables are also provided that list the instruction set grouped by opcode and clock cycles.
8085_MicroelectronicAndMicroprocess.pdf
This document provides an appendix with information about the 8085 instruction set, including a table that lists each instruction opcode and a brief description. It includes sections on data transfer instructions, arithmetic instructions, logical instructions, branching instructions, I/O instructions, stack and machine control instructions, and interrupt control and processor control instructions. Tables are also provided that list the instruction set grouped by opcode and clock cycles.
3.ASSEMBLERS.pptx
An assembler is a program that translates assembly language code into machine language code that can be executed by a computer. It performs this translation in two passes. In the first pass, it identifies symbols and calculates addresses. It builds symbol tables to track symbol values and locations. In the second pass, it uses the symbol tables to replace symbols with values or addresses and generate the machine code instructions and data. The summarizes the key components and processes of an assembler, including its data structures like symbol tables, and how it performs tasks like symbol resolution and machine code generation through its two passes.
Memory Reference instruction
The document describes the instruction set and control unit design of a basic computer. It includes:
- Memory reference instructions like AND, ADD, LDA, STA, BUN, BSA, ISZ for arithmetic, data transfer, and control flow.
- Register reference instructions like CLA, CLE, CMA for operations using the accumulator and extended accumulator.
- Input/output instructions like INP, OUT for device I/O.
The control unit implements an instruction cycle of fetch, decode, execute through a hardwired design using a program counter, instruction register, decoders and timing signals from a sequence counter. The instruction format and timing of each instruction type is also explained.
MPMC Architecture of 8085 Microprocessor and Programming.pptx
This document provides information about microprocessors and microcontrollers including:
- A table showing the evolution of microprocessors from the 4004 in 1971 to modern Intel processors with increasing data bus widths and capabilities.
- Descriptions of the differences between microprocessors which are the central components of computers, and microcontrollers which integrate CPU and peripherals into a single chip for embedded systems.
- Examples of assembly language instructions for the 8085 microprocessor and their opcodes, addressing modes, and effects on status flags.
Anup2
This document is a project report on a temperature controller and display circuit created by students at Ganpat University. The circuit uses an AT89S52 microcontroller to interface with an ADC0804 analog-to-digital converter and LCD display to measure temperature from a LM35 sensor, display the current temperature, and control a relay and buzzer based on a setpoint temperature entered by the user. The circuit and programming allow the user to increment and decrement the setpoint temperature using switches and trigger an alarm if the current temperature exceeds the setpoint.
Keypad interfacing 8051 -NANOCDAC
Searching for Embedded Systems,VLSI,Matlab, PLC scada Training Institute in Hyderabad-Get the Best Embedded Systems,VLSI,Matlab, PLC scada Training with Real time Projects from Nanocdac. Register now for new batches Call Us-040 -23754144,+91- 9640648777
Performance e Produtividade: 2 Habilidades para Transformar seu Relacionament...
Acesso ao banco é crítico nos projetos. É fácil derrubar a performance com consultas pesadas. E tudo fica pior se o banco de dados tem muita informação, ou se por uma consulta mal feita!
Um agravante neste situação: como testar em cenários próximos ao real e de forma produtiva? Nesta palestra você vai melhorar seu relacionamento com o banco de dados aprendendo um poderoso recurso pouco utilizado pelos desenvolvedores e também como testar suas consultas em um ambiente totalmente isolado, com apenas um comando.
PIC16F877A C Programming.ppt
The document discusses the PIC16F877 microcontroller. It provides details about its memory, packaging options, I/O pins and their special functions. Examples are given to illustrate using the microcontroller for an LED flasher, lockout system, musical tone generator, stepper motor controller and PWM motor speed control using interrupts. The examples cover digital I/O, timers, interrupts, ADC and USART communication.
Rina Wahyuni ~ Jual Harga & Detail Total Station Pentax R422 (Single Face) 08...
TRANS SURVEY
Alamat : Jalan .Joglo Raya No.27A (11640) Jakarta Barat
Contact Person : Rina Wahyuni
Telp Kantor : (021) 22544580
No Ponsel :
Simpati : 081297551995/WA
XL : 087714476290/WA
Pin BB : 5BADB3CF
email : rinawahyuni260@gmail.com
website : http://www.transsurvey.net
Kami disini sebagai Perusahaan supplier alat survey tanah atau bangunan, alat survey telekomunikasi, alat survey geologi atau mining, dan alat survey lainnya diantaranya Total Station, Digital Theodolite, Automatic Level, GPS, Kompas, Binoculars, Monocullars, Laser Rangefinder, Teropong Malam, Digital Altimeter, Clinometer, Tandem, Digital Planimeter, Distometer Speed Gun, Measuring Wheel, Measuring Tape, Grounding Tester, HT Handy Talky, Sound Level Meter, dan alat alat Geologi.
Ditunjang dengan merk merk yang sudah terkenal dan telah diakui keberadaanya di dunia survey diantaranya Topcon,Nikon,Sokkia, Garmin, Trimble, Magellan, Suunto, Horizon, Bushnell, Bruunton
Leica, Bosch, South, Yamayo, Tajima, Icom, Kyoritsu,
Semoga keberadan kami dapat menjawab sekaligus memenuhi kebutuhan alat survey yang keberadaannya sangat dibutuhkan pada era perkembangan pembangunan dan tekhnologi pada saat ini.
KAMI MELAYANI PEMESANAN KESELURUH KOTA-KOTA DI INDONESIA,
Surabaya, Bali, Sidoarjo, Malang, Semarang, Yogyakarta, Pekalongan, Cirebon, Tangerang, Jakarta, Bandung, Sumatra, Aceh, Lampung, Medan, Riau, Batam, Jambi, Padang, Kalimantan, Samarinda, Pekanbaru, Bengkulu, Makasar, Menado, Sulawesi, Irian jaya,Papua, Ambon, Bangka Belitung, Banten, Jabar, Jateng, Jatim, Ntt, Ntb, Gorontalo, maluku DLL
Pengiriman Untuk Kota Jakarta Gratis. Luar Jakarta dengan layanan JNE,TIKI, KARGO, dan Exspedisi lainnya.
2. 8085-Microprocessor.pptx
The 8085 microprocessor is an 8-bit CPU with 40 pins that requires a +5V power supply. It has an 8-bit data bus and 16-bit address bus that can access up to 64KB of memory. The 8085 architecture includes six 8-bit registers (BC, DE, HL), an 8-bit accumulator, 16-bit program counter, 16-bit stack pointer, and 5-bit flag register. The multiplexed address/data bus is used to transfer both addresses and data. Control signals include RD, WR, ALE and status signals S1 and S0 are used to indicate read, write and other operations to memory or I/O devices.
8085 microprocessor(1)
The document describes the 8085 microprocessor. It provides details on the architecture of the 8085 microprocessor including its pin configuration, address and data buses, control signals, interrupts, and block diagram. It also discusses the instruction set of the 8085 which includes data transfer, arithmetic, logical, and branching instructions. Programming models involving registers, flags, stacks, counters, and delays are explained. An example of a traffic light control system using the 8085 is also provided.
5asm the stackandsubroutines
The document discusses the stack and subroutines in assembly language programming. Some key points:
- The stack pointer (SP or A7) points to the top of the stack, which grows downward in memory. Values are pushed onto the stack using predecrement mode and popped using postincrement mode.
- The stack is used for temporary variable storage, passing parameters to subroutines, and storing the return address when making subroutine calls with JSR.
- To call a subroutine, parameters are pushed to the stack, JSR jumps to the subroutine, and RTS pops the return address back to PC. Transparent subroutines save and restore any modified registers.
- Parameters
2013 1 arduino_datalogger
The document summarizes how to create a data logger using an Arduino board. It describes connecting sensors like a barometric pressure sensor and LCD display to log weather data over time to an SD card. Libraries are used to interface with the sensors and SD card. Code examples show how to record time-stamped sensor readings every 6 minutes to the SD card in CSV format.
Chp7 pic 16 f84 interfacing - copy
The document discusses interfacing I/O ports on the PIC16F84 microcontroller. It describes how to configure the ports as inputs or outputs using the TRIS registers and how to read from and write to the pins. It also covers interrupts, timers, serial communication, analog to digital conversion, and provides an example of a water temperature alarm system using these concepts.
OptimizingARM
This document discusses optimizing code for ARM architectures. It provides information on various ARM platforms used in devices like the GameBoy Advance, Nintendo DS, Nintendo DSi, Nintendo 3DS, PlayStation Vita, Apple devices and Android. It outlines key features of ARM architectures like multiple instruction sets, variable cycle execution, load/store multiple instructions and DSP/SIMD extensions. It also provides tips for optimizing code like using 32-bit data types, avoiding pointer aliasing, improving loop unrolling and counting down in loops where possible.
Lec2.ppt
The document discusses topics related to embedded systems programming including I/O, logic and shift operations, addressing modes, memory operations, and subroutines. It begins by outlining the agenda and then goes on to explain I/O ports and control registers on the TM4C123 microcontroller. It also covers logic, shift, and memory access instructions in ARM assembly language as well as different addressing modes. Examples are provided to illustrate how to use these instructions to perform operations like setting and toggling bits on I/O ports.
Architecture of 8085
The document describes the architecture of the 8085 microprocessor. It introduces the 8085 and its key specifications. It then describes the main parts of the 8085 including the arithmetic/logical group, register group, interrupt controller, serial I/O control, and instruction register/decoder/timing and control group. It provides details on the general purpose registers, accumulator, flags register, and special purpose registers used in the 8085 architecture.
Similar to Assembler numericals by aniket bhute (20)
MPMC Architecture of 8085 Microprocessor and Programming.pptx
MPMC Architecture of 8085 Microprocessor and Programming.pptx
Performance e Produtividade: 2 Habilidades para Transformar seu Relacionament...
Performance e Produtividade: 2 Habilidades para Transformar seu Relacionament...
8087 MICROPROCESSOR and diagram with definition.pdf
8087 MICROPROCESSOR and diagram with definition.pdf
Rina Wahyuni ~ Jual Harga & Detail Total Station Pentax R422 (Single Face) 08...
Rina Wahyuni ~ Jual Harga & Detail Total Station Pentax R422 (Single Face) 08...
More from Aniket Bhute
Cn transmission media by aniket bhute
This document summarizes different types of transmission media used for computer networks. It discusses two main types: guided and unguided media. Guided media includes twisted pair cables, coaxial cables, and optical fibers which guide the data signals along a transmission path. Unguided or wireless media transmits data without a physical connection and includes radio waves, microwaves, and infrared signals. The document provides details on each of these transmission media types, their characteristics, and common applications.
Basic structure of computers by aniket bhute
The document summarizes the basic structure and functional units of computers. It discusses how computers handle information through instructions and data. The main functional units that process information are the memory unit, arithmetic and logic unit (ALU), and control unit. It also describes the number representation systems used in computers, focusing on the two's complement system for signed integers. Addition and subtraction are performed through two's complement arithmetic.
Basic processing unit by aniket bhute
The document describes the basic processing unit of a computer system. It discusses key components like the instruction set processor, central processing unit, program counter, instruction register, and arithmetic logic unit. It explains how a typical computing task is executed through a sequence of machine instructions. The fundamental concepts covered include fetching and executing instructions one at a time, and keeping track of the next instruction address using the program counter.
Arithmetic by aniket bhute
This document provides an overview of arithmetic and multiplication algorithms. It discusses n-bit addition using a ripple carry adder and carry lookahead adder. It also covers unsigned and signed multiplication, including using a combinatorial array multiplier and sequential multiplier. The Booth algorithm for signed multiplication is also introduced.
Address translation-mechanism-of-80386 by aniket bhute
The 80386 CPU uses a two-level address translation mechanism to map logical addresses to physical addresses. It first uses segmentation to translate logical addresses to linear addresses, then uses paging to translate linear addresses to physical addresses. Paging involves using the page directory and page tables, which are stored in memory and map 4KB pages to physical addresses. The TLB cache is used to improve performance by storing recently used page table entries to avoid having to access memory for translation.
8251 usart programmable communication interface by aniket bhute
This document provides an overview of the 8251A USART chip, including:
- It is a programmable peripheral designed for serial communication that converts parallel data from the CPU to serial and vice versa.
- It has sections for the data bus buffer, read/write control logic, modem control, transmitter and receiver.
- The transmitter accepts parallel data and converts it to serial, while the receiver accepts serial data and converts it to parallel for the CPU.
- It has control, status and data registers that are accessed via various control signals to read/write data and control the chip's operation.
More from Aniket Bhute (6)
Address translation-mechanism-of-80386 by aniket bhute
Address translation-mechanism-of-80386 by aniket bhute
8251 usart programmable communication interface by aniket bhute
8251 usart programmable communication interface by aniket bhute
Recently uploaded
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
DfMAy 2024 - key insights and contributions
We have compiled the most important slides from each speaker's presentation. This year’s compilation, available for free, captures the key insights and contributions shared during the DfMAy 2024 conference.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
Recently uploaded (20)
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
Assembler numericals by aniket bhute
- 1. For the program given below , make SYMBOL TABLE,LITERAL TABLE,BASE TABLE & show generated machine code. Statement 1 PRGAM2 START 0 0 2 USING *,15 0 3 LA 15, SETUP 0 4 SR TOTAL,TOTAL 4 5 AC EQU 2 2 6 INDEX EQU 3 3 7 TOTAL EQU 4 4 8 DATABASE EQU 13 13 9 SETUP EQU * 6 10 USING SETUP,15 6 11 L DATABASE,=A(DATA1) 6 12 USING DATAAREA,DATABASE 6 13 SR INDEX,INDEX 10 14 LOOP L AC,DATA1(INDEX) 12 15 AR TOTAL,AC 16 16 A AC,=F’5’ 20 17 ST AC,SAVE(INDEX) 24 18 A INDEX,=F’4’ 28
- 2. Statement 19 C INDEX,=F’8000’ 32 20 BNE LOOP 36 21 LR 1,TOTAL 40 22 BR 14 44 23 LTORG 48 24 SAVE DS 2000F 64 25 DATAAREA EQU * 8064 26 DATA1 DC F’25,26,97,101…….’ 8064 2000 NUMBERS END
- 3. SYMBOL TABLE SYMBOL VALUE LENGTH RELOCATION PRGAM2 0 1 R AC 2 1 A INDEX 3 1 A TOTAL 4 1 A DATABASE 13 1 A SETUP 6 1 R LOOP 12 4 R SAVE 64 4 R DATAAREA 8064 1 R DATA1 8064 4 R
- 4. LITERAL TABLE LITERAL VALUE LENGTH RELOCATION A(DATA1) 48 4 R F’5’ 52 4 R F’4’ 56 4 R F’8000’ 30 4 R
- 5. BASE TABLE AFTER STATEMENT 2 BASE CONTENT 15 0 AFTER STATEMENT 10 BASE CONTENT 15 6 AFTER STATEMENT 10 BASE CONTENT 13 8064 15 6
- 6. Statement LOCATION INSTRUCTION 3 0 LA 15,6(0,15) 4 4 SR 4,4 11 6 L 13,42(0,15) 13 10 SR 3,3 14 12 L 2,0(3,13) 15 16 AR 4,2 16 18 A 2,46(0,15) 17 22 ST 2,58(3,15) 18 26 A 3,50(0,15) 19 30 C 3,54(0,15) 20 34 BC 7,6(0,15) 21 38 LR 1,4 22 40 BCR 15,14 23 48 8064 52 X’00000005’ 56 X’00000004’ 60 8000