Week #12 article #3
•
0 likes•215 views
The document discusses the Pacific Ring of Fire, an area in the Pacific Ocean known for earthquakes and volcanic eruptions. It notes that the Ring of Fire is influenced by plate tectonics as the movement and collisions of plates directly influence the region. Approximately 90% of the world's earthquakes occur in this area, including the world's largest, due to the subduction and movement of tectonic plates along plate boundaries.
Report
Share
Report
Share
Download to read offline
Recommended
Earthquakes powerpoint
The document discusses earthquakes, including their causes, measurement, effects, and preparedness. Earthquakes occur due to the sudden release of built-up stress along fault lines in the earth's crust, causing seismic waves. Their magnitude is measured using scales like the Richter scale or moment magnitude scale. Earthquakes can damage infrastructure and the environment through ground shaking and secondary events like tsunamis or landslides. While earthquakes cannot be prevented, preparation through emergency planning and building design can reduce risks.
Class j shon the ring of fire
The Ring of Fire is an area around the Pacific Ocean where many earthquakes and volcanic eruptions occur due to tectonic plates meeting. It is shaped like a horseshoe and contains over 75% of the world's active volcanoes, stretching from South America to Japan. Most active volcanoes are located on the western edge of the Ring of Fire, from Russia to New Zealand, due to seismic activity where continental plates meet oceanic plates.
The ring of fire jyoti mazumder
This document discusses natural disasters and provides information about them. It defines a natural disaster as a major adverse event caused by natural hazards that can result in loss of life, injury, economic loss, and environmental damage. It also discusses the Ring of Fire, which is an area in the Pacific Ocean basin with many earthquakes and volcanic eruptions due to tectonic plate movement. Several organizations that help respond to natural disasters are also mentioned, including the National Disaster Management Authority of India and International Federation of Red Cross and Red Crescent Societies.
Earthquake powerpoint
An earthquake occurs when two blocks of the earth's crust slip past one another, causing the ground to shake. Most earthquakes happen along the edges of tectonic plates that slowly move and bump against each other deep underground. Earthquakes can cause massive damage and loss of life, such as the 1556 Shaanxi earthquake in China that killed over 800,000 people. Modern solutions aim to better predict, withstand, and prepare for earthquakes to minimize harm.
Tsunami
Earthquakes, landslides, volcanic eruptions and other disturbances can cause tsunamis by displacing large amounts of water. Tsunamis are a series of long sea waves that can travel across entire oceans within hours. Three-quarters of tsunamis occur in the Pacific Ocean due to high seismic activity along subduction zones that make up the Pacific Ring of Fire. When tsunamis reach land, they can devastate coastal areas by destroying homes and infrastructure and endangering human life. On average, two tsunamis occur globally each year, with about 80% originating in the Pacific Ocean.
Revisons 1
The document discusses plate tectonics and volcanoes. It explains that plates move in three ways - converging towards each other, diverging away from each other, or sliding past each other. Volcanoes form at plate boundaries, especially at convergent boundaries where one plate subducts beneath another. This causes melting and upwelling of magma, resulting in volcanism. The Ring of Fire in the Pacific is an example of concentrated volcanism along plate boundaries.
what would happen if the earth stopped spinning
If the Earth stopped spinning:
- Gravity would disappear and everything on Earth would be launched into space at thousands of miles per hour.
- Massive winds at the equator would cause erosion and drought as oceans moved to the poles, destroying life.
- Days would take 365 days to complete as it took a year to rotate once on its axis.
- The moon would crash into Earth without the spin generating gravity, and the magnetic field protecting life would disappear.
- GPS systems would fail, resulting in plane crashes and other issues.
Pacific ring of fire
The Pacific Ring of Fire is a horseshoe shaped area surrounding the Pacific Ocean that experiences significant seismic and volcanic activity due to tectonic plate movement. Major plate boundaries like the subduction of the Pacific plate cause volcanoes and earthquakes that have impacted billions and cost billions. The Ring of Fire is responsible for events like the 1991 Mt. Pinatubo eruption and the 2011 Japan earthquake and tsunami that killed over 10,000 people annually and cost billions.
Recommended
Earthquakes powerpoint
The document discusses earthquakes, including their causes, measurement, effects, and preparedness. Earthquakes occur due to the sudden release of built-up stress along fault lines in the earth's crust, causing seismic waves. Their magnitude is measured using scales like the Richter scale or moment magnitude scale. Earthquakes can damage infrastructure and the environment through ground shaking and secondary events like tsunamis or landslides. While earthquakes cannot be prevented, preparation through emergency planning and building design can reduce risks.
Class j shon the ring of fire
The Ring of Fire is an area around the Pacific Ocean where many earthquakes and volcanic eruptions occur due to tectonic plates meeting. It is shaped like a horseshoe and contains over 75% of the world's active volcanoes, stretching from South America to Japan. Most active volcanoes are located on the western edge of the Ring of Fire, from Russia to New Zealand, due to seismic activity where continental plates meet oceanic plates.
The ring of fire jyoti mazumder
This document discusses natural disasters and provides information about them. It defines a natural disaster as a major adverse event caused by natural hazards that can result in loss of life, injury, economic loss, and environmental damage. It also discusses the Ring of Fire, which is an area in the Pacific Ocean basin with many earthquakes and volcanic eruptions due to tectonic plate movement. Several organizations that help respond to natural disasters are also mentioned, including the National Disaster Management Authority of India and International Federation of Red Cross and Red Crescent Societies.
Earthquake powerpoint
An earthquake occurs when two blocks of the earth's crust slip past one another, causing the ground to shake. Most earthquakes happen along the edges of tectonic plates that slowly move and bump against each other deep underground. Earthquakes can cause massive damage and loss of life, such as the 1556 Shaanxi earthquake in China that killed over 800,000 people. Modern solutions aim to better predict, withstand, and prepare for earthquakes to minimize harm.
Tsunami
Earthquakes, landslides, volcanic eruptions and other disturbances can cause tsunamis by displacing large amounts of water. Tsunamis are a series of long sea waves that can travel across entire oceans within hours. Three-quarters of tsunamis occur in the Pacific Ocean due to high seismic activity along subduction zones that make up the Pacific Ring of Fire. When tsunamis reach land, they can devastate coastal areas by destroying homes and infrastructure and endangering human life. On average, two tsunamis occur globally each year, with about 80% originating in the Pacific Ocean.
Revisons 1
The document discusses plate tectonics and volcanoes. It explains that plates move in three ways - converging towards each other, diverging away from each other, or sliding past each other. Volcanoes form at plate boundaries, especially at convergent boundaries where one plate subducts beneath another. This causes melting and upwelling of magma, resulting in volcanism. The Ring of Fire in the Pacific is an example of concentrated volcanism along plate boundaries.
what would happen if the earth stopped spinning
If the Earth stopped spinning:
- Gravity would disappear and everything on Earth would be launched into space at thousands of miles per hour.
- Massive winds at the equator would cause erosion and drought as oceans moved to the poles, destroying life.
- Days would take 365 days to complete as it took a year to rotate once on its axis.
- The moon would crash into Earth without the spin generating gravity, and the magnetic field protecting life would disappear.
- GPS systems would fail, resulting in plane crashes and other issues.
Pacific ring of fire
The Pacific Ring of Fire is a horseshoe shaped area surrounding the Pacific Ocean that experiences significant seismic and volcanic activity due to tectonic plate movement. Major plate boundaries like the subduction of the Pacific plate cause volcanoes and earthquakes that have impacted billions and cost billions. The Ring of Fire is responsible for events like the 1991 Mt. Pinatubo eruption and the 2011 Japan earthquake and tsunami that killed over 10,000 people annually and cost billions.
Earthquakes
Earthquakes are caused by the sudden release of built-up stress within rocks along geologic faults or by volcanic activity. Seismic waves originate at the focus and travel outward, including primary (P) waves, secondary (S) waves, and surface waves. Earthquakes are measured on the Richter scale, and can cause damage through ground shaking, infrastructure collapse, fires, flooding, and tsunamis. Bangladesh experiences earthquakes due to its location within the Himalayan seismic zone, with preventive design measures including reinforced construction and following building codes.
Ring of fire
The Ring of Fire is a ring of volcanoes around the Pacific Ocean that results from tectonic plates subducting under each other. It is located around the edges of the Pacific Ocean and features a string of volcanoes and sites of seismic activity. Its importance is that volcanic activity occurs there rather than in other parts of the Earth where it could cause more damage.
When the earth shook
The document discusses earthquakes, including what causes them, the Richter scale for measuring their strength, and safety tips. It notes that earthquakes occur when tectonic plates suddenly slip, releasing energy in the form of shock waves. The Richter scale is used to describe the magnitude of earthquakes on a logarithmic scale. Larger numbers indicate stronger quakes that can cause greater damage to structures. The document advises that during an earthquake, one should drop, cover, and hold on to protect oneself.
Earthquakes by hayleigh and bodelle
Over 15,000 earthquakes have occurred in New Zealand. When two parts of the Earth's surface move suddenly along a fault line due to tectonic forces, an earthquake occurs. Earthquakes can cause massive damage through shaking and collapsing buildings, which then must be rebuilt. Most earthquakes happen along the boundaries of tectonic plates, which move due to convection currents in the Earth's mantle.
A ppt on earthquake & management umang
1) Earthquakes are caused by the sudden release of energy in the Earth's crust from the slow movement of tectonic plates. They generate shock waves that radiate out from the epicenter.
2) Most earthquakes occur along plate boundaries and are measured on the Richter scale. Earthquakes above magnitude 7 can cause widespread damage depending on their depth and location.
3) Different types of seismic waves like P, S, R and L waves are generated by earthquakes and travel through the Earth causing shaking at the surface. Surface waves tend to be more destructive to buildings and infrastructure.
What are Earthquakes?
Earthquakes are caused by the buildup and sudden release of energy along fault lines in the earth's crust. The crust consists of massive tectonic plates that are slowly moving and building up tension over time. When the pressure between plates grows too great, the fault lines suddenly slip, causing the plates to shift. This movement releases seismic waves that radiate outward, shaking the ground and structures on the surface and causing earthquakes.
Tsunamis charlie & jay
Tsunamis are mostly caused by large earthquakes on the seafloor when slabs of rock move past each other suddenly, causing the overlying water to move. While 80% occur in the Pacific Ocean's "Ring of Fire" due to tectonic activity, they can also be triggered by underwater landslides or volcanic eruptions. Tsunamis initially appear as small waves but grow dramatically in size and can cause huge destruction when hitting coastlines, destroying property, infrastructure, and leaving over 200,000 people dead across 14 countries according to records.
Mt st helens
The document summarizes information about the 1980 eruption of Mount St. Helens volcano in Washington state. It describes the location and formation of the volcano. It outlines signs of increased activity prior to the eruption on May 18, 1980, when an earthquake triggered a massive landslide and eruption column. The eruption devastated the surrounding area through pyroclastic flows and ashfall, killing 57 people and countless animals and damaging billions of dollars' worth of timber and infrastructure. The volcano remained active after the 1980 eruption.
The Tectonic Plates And Volcanoes
1) Tectonic plates slowly move across the Earth's surface over the course of a year, occasionally crashing into each other. When they crash, it can cause natural disasters like volcanic eruptions and earthquakes.
2) Volcanoes form as magma cools and piles up from cracks in the Earth's crust caused by the movement of tectonic plates and resulting earthquakes.
3) Tectonic plate collisions, though slow, continually form new landforms like mountains and volcanoes as the plates interact within the limited space available.
Plate tectonics
This document provides information about plate tectonics through 5 sections:
1) It defines plate tectonics and provides diagrams of Earth's layers.
2) It describes where plate tectonics is occurring globally and locally through examples.
3) It discusses how plate tectonics has affected life on Earth through changing environments and fossil evidence.
4) It notes there are still issues and debates around fully understanding the mechanisms driving plate tectonics and predicting impacts.
5) It argues more research across scientific fields is needed to better comprehend plate tectonics and issues like its relationship to volcanism and climate change.
Photographic evidence Joanne
This document provides information about different types of plate boundaries including convergent, divergent, and transform boundaries. It describes how each boundary forms different geological features like mountains, trenches, and faults. It also discusses earthquakes, seismic waves, tsunamis, volcanoes, and the structure of the Earth's interior.
Tides
This presentation is for my Geography 110 class. Just an FYI if you are curious, the second to last slide that is captioned "Problems?" is about Red Tides
Holy smokes its a volcano
Volcanoes form at plate boundaries and hot spots. The type of eruption depends on the magma composition and amount of trapped gases. Shield volcanoes have basaltic lava and gentle slopes. Cinder cone volcanoes have steep sides built from explosive eruptions. Composite volcanoes have characteristics of both and can be very explosive, like Mount St. Helens. Scientists monitor volcanoes for warning signs like earthquakes. Volcanic eruptions release gases and ash that affect global climate and release materials that shape the land, water, and air.
The Ring of Fire
The Ring of Fire is composed of many volcanoes and tectonic structures surrounding the Pacific Ocean. It is located around the Pacific Ocean and is important because the volcanoes produce volcanic ash which acts as a natural fertilizer. Key features of the Ring of Fire include its numerous volcanoes.
Earthquakes- environmental management studies
An earthquake occurs due to a sudden release of energy in the Earth's crust that creates seismic waves. Earthquakes can cause widespread damage through ground shaking, landslides, liquefaction and tsunamis. The 2010 Haiti earthquake, caused by tectonic plates sliding past each other, measured 7.0 on the Richter scale and resulted in over 300,000 deaths as well as severe damage to infrastructure and buildings. The effects were exacerbated by challenges in distributing aid and secondary issues like disease outbreaks and homelessness.
Plate Tectonics Photographic Evidence - QiHua
1) There are several types of plate boundaries including convergent boundaries where plates collide and form mountains, divergent boundaries where plates separate and form rift valleys, and transform boundaries where plates slide past each other causing earthquakes.
2) Earthquakes occur when rocks underground suddenly break along a fault line. Major earthquakes can cause extensive damage to infrastructure and loss of life. They also sometimes trigger tsunamis.
3) Tsunamis are large sea waves caused by earthquakes or other seismic events under the sea. The 2011 tsunami in Japan was triggered by a powerful earthquake and resulted in over 3,000 deaths as well as nuclear radiation leaks.
Earthquake
1) An earthquake is caused by a sudden release of energy in the earth's crust that creates seismic waves. 2) There are different types of seismic waves including P waves, S waves, Love waves, and Rayleigh waves that move in different motions. 3) The epicenter of an earthquake can be located using data from at least 3 seismic stations to determine where the P and S waves intersect. 4) Major earthquakes can cause widespread destruction and loss of life depending on their magnitude and proximity to populated areas. 5) Common effects of earthquakes include damage to infrastructure, disruption of basic services, loss of life and property, and economic impacts.
Untitled presentation
The document discusses the four main types of plate boundaries:
1) Convergent boundaries, where plates collide, can form mountains, trenches, or volcanic islands depending if the plates are continental or oceanic. Examples given are the Himalayas and Mauna Loa volcano in Hawaii.
2) Transform boundaries, where plates slide past each other, can cause earthquakes like the 1906 San Andreas quake or tsunamis like the 2011 Japan event.
3) Divergent boundaries, where plates move apart, form rift valleys like in East Africa or mid-ocean ridges like the Juan de Fuca Ridge.
4) Examples of each boundary type are analyzed in more detail, explaining how the
Eliot's slide
Volcanoes are mountains that open downward into magma below the Earth's surface. When pressure builds, an eruption occurs where gases and rock shoot out of the opening. Eruptions can cause lateral blasts, lava flows, ash flows, mudslides, falling ash, and floods. During an eruption, volcanoes can knock down forests and trigger tsunamis, earthquakes, mudflows and rockfalls. The largest volcano in the solar system is Olympus Mons on Mars, which is 600km wide and 21km high, while Io, one of Jupiter's moons, has the most volcanic activity due to its constantly changing surface. Volcanic eruptions can endanger people through ashfall that
Earthquakes
An earthquake is caused by the sudden movement of tectonic plates along fault lines in the earth's crust. This movement sends out shock waves that can damage structures and alter the earth's surface by causing landslides, tsunamis, and volcanic eruptions. The location below the surface where the earthquake starts is called the hypocenter, while the epicenter is the location directly above on the surface. Earthquakes occur when built-up pressure causes rocks along fault lines to suddenly break. The most devastating earthquakes in history include the 1556 Shaanxi earthquake in China that killed over 830,000 people and the 1976 Tangshan earthquake in China that killed between 240,000 and 655,000 people.
Sw2 3
The Pacific Ring of Fire is an area in the basin of the Pacific Ocean where large numbers of earthquakes and volcanic eruptions occur. About 90% of the world's earthquakes and 80% of the largest earthquakes happen along this Ring of Fire due to the movement of tectonic plates underneath the Earth's surface. Some of the largest earthquakes that have occurred along the Ring of Fire include the 2004 Sumatra earthquake that was magnitude 9.1 and caused over 200,000 casualties and the 2011 Tohoku earthquake off the coast of Japan which was magnitude 9.0 and resulted in over 15,000 casualties.
Sw2 3(2)
The Pacific Ring of Fire is an area in the basin of the Pacific Ocean where large numbers of earthquakes and volcanic eruptions occur. About 90% of the world's earthquakes and 80% of the largest earthquakes happen along this Ring of Fire due to the movement of tectonic plates underneath the Earth's surface. Some of the largest earthquakes that have occurred along the Ring of Fire include the 2004 Sumatra earthquake that was magnitude 9.1 and caused over 200,000 casualties and the 2011 Tohoku earthquake off the coast of Japan which was magnitude 9.0 and resulted in over 15,000 casualties.
More Related Content
What's hot
Earthquakes
Earthquakes are caused by the sudden release of built-up stress within rocks along geologic faults or by volcanic activity. Seismic waves originate at the focus and travel outward, including primary (P) waves, secondary (S) waves, and surface waves. Earthquakes are measured on the Richter scale, and can cause damage through ground shaking, infrastructure collapse, fires, flooding, and tsunamis. Bangladesh experiences earthquakes due to its location within the Himalayan seismic zone, with preventive design measures including reinforced construction and following building codes.
Ring of fire
The Ring of Fire is a ring of volcanoes around the Pacific Ocean that results from tectonic plates subducting under each other. It is located around the edges of the Pacific Ocean and features a string of volcanoes and sites of seismic activity. Its importance is that volcanic activity occurs there rather than in other parts of the Earth where it could cause more damage.
When the earth shook
The document discusses earthquakes, including what causes them, the Richter scale for measuring their strength, and safety tips. It notes that earthquakes occur when tectonic plates suddenly slip, releasing energy in the form of shock waves. The Richter scale is used to describe the magnitude of earthquakes on a logarithmic scale. Larger numbers indicate stronger quakes that can cause greater damage to structures. The document advises that during an earthquake, one should drop, cover, and hold on to protect oneself.
Earthquakes by hayleigh and bodelle
Over 15,000 earthquakes have occurred in New Zealand. When two parts of the Earth's surface move suddenly along a fault line due to tectonic forces, an earthquake occurs. Earthquakes can cause massive damage through shaking and collapsing buildings, which then must be rebuilt. Most earthquakes happen along the boundaries of tectonic plates, which move due to convection currents in the Earth's mantle.
A ppt on earthquake & management umang
1) Earthquakes are caused by the sudden release of energy in the Earth's crust from the slow movement of tectonic plates. They generate shock waves that radiate out from the epicenter.
2) Most earthquakes occur along plate boundaries and are measured on the Richter scale. Earthquakes above magnitude 7 can cause widespread damage depending on their depth and location.
3) Different types of seismic waves like P, S, R and L waves are generated by earthquakes and travel through the Earth causing shaking at the surface. Surface waves tend to be more destructive to buildings and infrastructure.
What are Earthquakes?
Earthquakes are caused by the buildup and sudden release of energy along fault lines in the earth's crust. The crust consists of massive tectonic plates that are slowly moving and building up tension over time. When the pressure between plates grows too great, the fault lines suddenly slip, causing the plates to shift. This movement releases seismic waves that radiate outward, shaking the ground and structures on the surface and causing earthquakes.
Tsunamis charlie & jay
Tsunamis are mostly caused by large earthquakes on the seafloor when slabs of rock move past each other suddenly, causing the overlying water to move. While 80% occur in the Pacific Ocean's "Ring of Fire" due to tectonic activity, they can also be triggered by underwater landslides or volcanic eruptions. Tsunamis initially appear as small waves but grow dramatically in size and can cause huge destruction when hitting coastlines, destroying property, infrastructure, and leaving over 200,000 people dead across 14 countries according to records.
Mt st helens
The document summarizes information about the 1980 eruption of Mount St. Helens volcano in Washington state. It describes the location and formation of the volcano. It outlines signs of increased activity prior to the eruption on May 18, 1980, when an earthquake triggered a massive landslide and eruption column. The eruption devastated the surrounding area through pyroclastic flows and ashfall, killing 57 people and countless animals and damaging billions of dollars' worth of timber and infrastructure. The volcano remained active after the 1980 eruption.
The Tectonic Plates And Volcanoes
1) Tectonic plates slowly move across the Earth's surface over the course of a year, occasionally crashing into each other. When they crash, it can cause natural disasters like volcanic eruptions and earthquakes.
2) Volcanoes form as magma cools and piles up from cracks in the Earth's crust caused by the movement of tectonic plates and resulting earthquakes.
3) Tectonic plate collisions, though slow, continually form new landforms like mountains and volcanoes as the plates interact within the limited space available.
Plate tectonics
This document provides information about plate tectonics through 5 sections:
1) It defines plate tectonics and provides diagrams of Earth's layers.
2) It describes where plate tectonics is occurring globally and locally through examples.
3) It discusses how plate tectonics has affected life on Earth through changing environments and fossil evidence.
4) It notes there are still issues and debates around fully understanding the mechanisms driving plate tectonics and predicting impacts.
5) It argues more research across scientific fields is needed to better comprehend plate tectonics and issues like its relationship to volcanism and climate change.
Photographic evidence Joanne
This document provides information about different types of plate boundaries including convergent, divergent, and transform boundaries. It describes how each boundary forms different geological features like mountains, trenches, and faults. It also discusses earthquakes, seismic waves, tsunamis, volcanoes, and the structure of the Earth's interior.
Tides
This presentation is for my Geography 110 class. Just an FYI if you are curious, the second to last slide that is captioned "Problems?" is about Red Tides
Holy smokes its a volcano
Volcanoes form at plate boundaries and hot spots. The type of eruption depends on the magma composition and amount of trapped gases. Shield volcanoes have basaltic lava and gentle slopes. Cinder cone volcanoes have steep sides built from explosive eruptions. Composite volcanoes have characteristics of both and can be very explosive, like Mount St. Helens. Scientists monitor volcanoes for warning signs like earthquakes. Volcanic eruptions release gases and ash that affect global climate and release materials that shape the land, water, and air.
The Ring of Fire
The Ring of Fire is composed of many volcanoes and tectonic structures surrounding the Pacific Ocean. It is located around the Pacific Ocean and is important because the volcanoes produce volcanic ash which acts as a natural fertilizer. Key features of the Ring of Fire include its numerous volcanoes.
Earthquakes- environmental management studies
An earthquake occurs due to a sudden release of energy in the Earth's crust that creates seismic waves. Earthquakes can cause widespread damage through ground shaking, landslides, liquefaction and tsunamis. The 2010 Haiti earthquake, caused by tectonic plates sliding past each other, measured 7.0 on the Richter scale and resulted in over 300,000 deaths as well as severe damage to infrastructure and buildings. The effects were exacerbated by challenges in distributing aid and secondary issues like disease outbreaks and homelessness.
Plate Tectonics Photographic Evidence - QiHua
1) There are several types of plate boundaries including convergent boundaries where plates collide and form mountains, divergent boundaries where plates separate and form rift valleys, and transform boundaries where plates slide past each other causing earthquakes.
2) Earthquakes occur when rocks underground suddenly break along a fault line. Major earthquakes can cause extensive damage to infrastructure and loss of life. They also sometimes trigger tsunamis.
3) Tsunamis are large sea waves caused by earthquakes or other seismic events under the sea. The 2011 tsunami in Japan was triggered by a powerful earthquake and resulted in over 3,000 deaths as well as nuclear radiation leaks.
Earthquake
1) An earthquake is caused by a sudden release of energy in the earth's crust that creates seismic waves. 2) There are different types of seismic waves including P waves, S waves, Love waves, and Rayleigh waves that move in different motions. 3) The epicenter of an earthquake can be located using data from at least 3 seismic stations to determine where the P and S waves intersect. 4) Major earthquakes can cause widespread destruction and loss of life depending on their magnitude and proximity to populated areas. 5) Common effects of earthquakes include damage to infrastructure, disruption of basic services, loss of life and property, and economic impacts.
Untitled presentation
The document discusses the four main types of plate boundaries:
1) Convergent boundaries, where plates collide, can form mountains, trenches, or volcanic islands depending if the plates are continental or oceanic. Examples given are the Himalayas and Mauna Loa volcano in Hawaii.
2) Transform boundaries, where plates slide past each other, can cause earthquakes like the 1906 San Andreas quake or tsunamis like the 2011 Japan event.
3) Divergent boundaries, where plates move apart, form rift valleys like in East Africa or mid-ocean ridges like the Juan de Fuca Ridge.
4) Examples of each boundary type are analyzed in more detail, explaining how the
Eliot's slide
Volcanoes are mountains that open downward into magma below the Earth's surface. When pressure builds, an eruption occurs where gases and rock shoot out of the opening. Eruptions can cause lateral blasts, lava flows, ash flows, mudslides, falling ash, and floods. During an eruption, volcanoes can knock down forests and trigger tsunamis, earthquakes, mudflows and rockfalls. The largest volcano in the solar system is Olympus Mons on Mars, which is 600km wide and 21km high, while Io, one of Jupiter's moons, has the most volcanic activity due to its constantly changing surface. Volcanic eruptions can endanger people through ashfall that
Earthquakes
An earthquake is caused by the sudden movement of tectonic plates along fault lines in the earth's crust. This movement sends out shock waves that can damage structures and alter the earth's surface by causing landslides, tsunamis, and volcanic eruptions. The location below the surface where the earthquake starts is called the hypocenter, while the epicenter is the location directly above on the surface. Earthquakes occur when built-up pressure causes rocks along fault lines to suddenly break. The most devastating earthquakes in history include the 1556 Shaanxi earthquake in China that killed over 830,000 people and the 1976 Tangshan earthquake in China that killed between 240,000 and 655,000 people.
What's hot (20)
Similar to Week #12 article #3
Sw2 3
The Pacific Ring of Fire is an area in the basin of the Pacific Ocean where large numbers of earthquakes and volcanic eruptions occur. About 90% of the world's earthquakes and 80% of the largest earthquakes happen along this Ring of Fire due to the movement of tectonic plates underneath the Earth's surface. Some of the largest earthquakes that have occurred along the Ring of Fire include the 2004 Sumatra earthquake that was magnitude 9.1 and caused over 200,000 casualties and the 2011 Tohoku earthquake off the coast of Japan which was magnitude 9.0 and resulted in over 15,000 casualties.
Sw2 3(2)
The Pacific Ring of Fire is an area in the basin of the Pacific Ocean where large numbers of earthquakes and volcanic eruptions occur. About 90% of the world's earthquakes and 80% of the largest earthquakes happen along this Ring of Fire due to the movement of tectonic plates underneath the Earth's surface. Some of the largest earthquakes that have occurred along the Ring of Fire include the 2004 Sumatra earthquake that was magnitude 9.1 and caused over 200,000 casualties and the 2011 Tohoku earthquake off the coast of Japan which was magnitude 9.0 and resulted in over 15,000 casualties.
What is ring_of_fire_
The Ring of Fire is an area in the Pacific Ocean that experiences frequent earthquakes and volcanic eruptions. It contains over 75% of the world's active and dormant volcanoes and is home to approximately 90% of the world's earthquakes. The Ring of Fire forms a path around the Pacific Ocean basin due to the subduction and collision of tectonic plates in the region. Countries like Japan that fall within the Ring of Fire are susceptible to volcanic and seismic activity.
focus and epicenter.pptx
The document provides information about earthquakes, including key terms and concepts:
- The focal point or hypocenter is the area inside the Earth where an earthquake starts. The epicenter is the point at the Earth's surface directly above the hypocenter.
- Intensity measures earthquake damage and is measured using the Mercalli scale, while magnitude measures the energy released and is quantified using the Richter scale.
- There are two main types of faults - active faults where displacement currently occurs and inactive faults where movement has not been observed in millions of years. The five major active fault lines in the Philippines are also listed.
CAMBRIDGE GEOGRAPHY A2 REVISION - HAZARDOUS ENVIRONMENTS RESULTING FROM TECTO...
CAMBRIDGE GEOGRAPHY A2 REVISION - HAZARDOUS ENVIRONMENTS: HAZARDOUS ENVIRONMENTS RESULTING FROM TECTONIC MOVEMENT. Presentation suitable for Cambridge A2 students. It contains: key terms and definitions, topic summary, additional work and suggested websites.
PPT - Ring of Fire
This powerpoint presentation provides information about volcanoes and volcanic disasters. It begins with an introduction explaining the purpose is to discuss preparedness for volcanic eruptions. It then covers various topics related to volcanoes including the Ring of Fire, different types of volcanoes, historic eruptions, and safety tips. Examples are given of famous volcanoes from around the world that are located within the Ring of Fire. The presentation concludes with emphasizing the destructive power of volcanoes and importance of being prepared if an eruption occurs in your area.
Chapter 1 gateway 1
The document discusses tectonic hazards from living in areas prone to natural disasters. It describes a deadly 2010 eruption of Mount Merapi in Indonesia that killed over 350 people and forced 300,000 from their homes, despite warnings. Some remained to care for cattle. It also discusses over 600,000 people living near the dangerous Mount Vesuvius volcano in Italy, which last erupted catastrophically in 79 CE. The chapter explores why some areas are more prone to tectonic hazards, landforms at plate boundaries, and earthquake preparedness and response.
Geological disasters
The document discusses different types of geological disasters including avalanches, landslides, earthquakes, and volcanic eruptions. It provides descriptions of what causes each type of disaster, examples of where they occur, their damaging effects, and safety tips. For each disaster type, the document outlines key factors like the mechanisms that trigger them, methods for predicting events, and international or local responses to past incidents. The overall document serves as an informative guide to common geological hazards and considerations for minimizing risks.
Geological disasters
The document discusses different types of geological disasters including avalanches, landslides, earthquakes, and volcanic eruptions. It provides details on the causes and characteristics of each type of disaster. For avalanches, it describes how they are created from heavy snowfall and their damage such as destroying buildings and forests. For landslides, it lists causes like earthquakes, heavy rainfall, and mining and provides prevention tips. The document also explains earthquake prediction methods and effects on infrastructure. Finally, it discusses volcanic eruptions being caused by rising magma and provides safety guidelines during and after an eruption.
ARTICLE REPORTING.pptx
WE ARE OFF TO DAANBANTAYAN!
Catch our Special Recruitment Activity on November 25 - 27 at the Lamberto R. Te Cultural Center, Poblacion, Daanbantayan, Cebu from 8AM - 5PM and get a chance to win awesome PRIZES + CASH REWARDS*!
Enjoy 30K* Joining Reward when you start on November 28 under our Premium Account!
JUST BRING A VALID ID!
What are you waiting for? SEE YOU THERE!
Minimum Requirements:
-Atleast 18 years old-Full time availability
-Amenable to work onsite (IT Park, Cebu City)
-Atleast HS Grad (old curriculum) or SHS Grad (new curriculum)
-Can start ASAP
*Terms & Conditions Apply
*Valid until supplies last
Earthquake
Earthquakes are the shaking, rolling or sudden shock of the earth’s surface. They are the Earth's natural means of releasing stress. Earthquakes can be felt over large areas.
Earthquakes cannot be predicted, although scientists are working on it.
EARTHQUAKE (25 to 30).pdf
Regarding Earthquake, remote sensing , GIS , Geography , Education . Geomorphism , earth activity , tectonic plates . daily problems , Occurance and effect
WEEK 1.pdf
This document provides an overview of the course content for a class on geological hazards. The course will cover various natural hazards including earthquakes, tsunamis, volcanoes, landslides, storms, wildfires, and floods. It will examine the causes and impacts of these hazards as well as mitigation strategies. Case studies of specific geological hazard events will also be discussed. The course aims to provide an understanding of natural processes and how to assess and reduce risks from natural hazards.
Final earthquake ppt.ppt
There are three main types of seismic waves that travel through the Earth during an earthquake:
1. P-waves are compressional body waves that move through solid rock and fluids.
2. S-waves are slower shear body waves that only move through solid rock.
3. Surface waves like Rayleigh and Love waves move along the Earth's surface and can cause significant damage.
Seismographs are used to measure and record these seismic waves to determine the location and magnitude of earthquakes.
Great East Japan Earthquake and Tsunami March 11, 2011
Great East Japan Earthquake and Tsunami March 11, 2011Professor Eric K. Noji, M.D., MPH, DTMH(Lon), FRCP(UK)hon
This is Chapter 1 in a newly published textbook entitled "Case Studies in Public Health Preparedness and Response to Disasters" -- "The Great East Japan Earthquake of March 11, 2011. This chapter describes what is probably the best example historically of what has come to be known as a "cascading crisis": earthquake, tsunami, with secondary nuclear reactor damage. http://www.jblearning.com/catalog/9781449645199/Â
earthquake
Earthquakes are caused by the sudden release of energy in the earth's crust that generates seismic waves. The location within the earth where rupture first occurs is known as the focus or hypocenter, while the point on the surface directly above is called the epicenter. Different types of seismic waves travel through the earth's interior or along its surface, causing shaking and damage. By measuring the arrival times of these waves at multiple seismograph stations, scientists can determine the epicenter location. Earthquakes are measured on the Richter scale by magnitude or the Mercalli scale by observed intensity. India experiences frequent earthquakes and is divided into different seismic zones based on risk levels. Major quakes have caused widespread destruction and loss of life in
Cyclone and Earthquake and different types of Cyclone and Earthquake
This document discusses cyclones and earthquakes. It provides information on the formation and classification of cyclones such as hurricanes, typhoons and cyclones. It describes the damage caused by tropical cyclones of varying wind speeds. It also discusses the formation of earthquakes, the different types of seismic waves, and ways of measuring the magnitude and intensity of earthquakes. Measurement tools for earthquakes like seismometers and changes observed prior to earthquakes are also mentioned.
Earthquake horrible
Most earthquakes occur along fault lines in the earth's crust due to the buildup and sudden release of strain energy. There are approximately 500,000 earthquakes detected around the world each year, with about 100,000 able to be felt. Major quakes of magnitude 7.0 or greater occur on average 18 times per year. The circum-Pacific seismic belt sees 90% of the world's quakes due to tectonic plate movement. Human activities such as dam building and fluid injection can also induce seismic activity in rare cases.
Design Steps for Earthquake Resistant Structures
This document provides information about earthquakes and their causes. It discusses what earthquakes are, how they are caused by the movement of tectonic plates along faults, and defines key terms like epicenter. It describes the interior structure of the Earth and plate tectonics. Safety procedures during earthquakes are outlined. The types of earthquake waves and how they are measured on seismographs is explained. Finally, it discusses earthquake magnitude scales and seismic zoning in India.
Report6
The Pacific Ring of Fire is a volcanic belt that surrounds the Pacific Ocean. Around 80% of the world's largest earthquakes occur in this region due to tectonic plate subduction, where one plate sinks beneath another. Japan, located on the Ring of Fire, experiences frequent earthquakes and volcanic eruptions from over 130 active volcanoes, such as Mount Fuji, which could cause devastating damage if it were to erupt again.
Similar to Week #12 article #3 (20)
CAMBRIDGE GEOGRAPHY A2 REVISION - HAZARDOUS ENVIRONMENTS RESULTING FROM TECTO...
CAMBRIDGE GEOGRAPHY A2 REVISION - HAZARDOUS ENVIRONMENTS RESULTING FROM TECTO...
Â
Great East Japan Earthquake and Tsunami March 11, 2011
Great East Japan Earthquake and Tsunami March 11, 2011
Â
Cyclone and Earthquake and different types of Cyclone and Earthquake
Cyclone and Earthquake and different types of Cyclone and Earthquake
Â
Recently uploaded
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S4 HANA to Public cloud data object differences
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
dbms calicut university B. sc Cs 4th sem.pdf
Its a seminar ppt on database management system using sql
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und ĂĽberflĂĽssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Trusted Execution Environment for Decentralized Process Mining
Presentation of the paper "Trusted Execution Environment for Decentralized Process Mining" given during the CAiSE 2024 Conference in Cyprus on June 7, 2024.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/temporal-event-neural-networks-a-more-efficient-alternative-to-the-transformer-a-presentation-from-brainchip/
Chris Jones, Director of Product Management at BrainChip , presents the “Temporal Event Neural Networks: A More Efficient Alternative to the Transformer” tutorial at the May 2024 Embedded Vision Summit.
The expansion of AI services necessitates enhanced computational capabilities on edge devices. Temporal Event Neural Networks (TENNs), developed by BrainChip, represent a novel and highly efficient state-space network. TENNs demonstrate exceptional proficiency in handling multi-dimensional streaming data, facilitating advancements in object detection, action recognition, speech enhancement and language model/sequence generation. Through the utilization of polynomial-based continuous convolutions, TENNs streamline models, expedite training processes and significantly diminish memory requirements, achieving notable reductions of up to 50x in parameters and 5,000x in energy consumption compared to prevailing methodologies like transformers.
Integration with BrainChip’s Akida neuromorphic hardware IP further enhances TENNs’ capabilities, enabling the realization of highly capable, portable and passively cooled edge devices. This presentation delves into the technical innovations underlying TENNs, presents real-world benchmarks, and elucidates how this cutting-edge approach is positioned to revolutionize edge AI across diverse applications.Â
JavaLand 2024: Application Development Green Masterplan
My presentation slides I used at JavaLand 2024
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on integration of Salesforce with Bonterra Impact Management.
Interested in deploying an integration with Salesforce for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Free A4 downloadable and printable Cyber Security, Social Engineering Safety and security Training Posters . Promote security awareness in the home or workplace. Lock them Out From training providers datahops.com
AWS Cloud Cost Optimization Presentation.pptx
This presentation provides valuable insights into effective cost-saving techniques on AWS. Learn how to optimize your AWS resources by rightsizing, increasing elasticity, picking the right storage class, and choosing the best pricing model. Additionally, discover essential governance mechanisms to ensure continuous cost efficiency. Whether you are new to AWS or an experienced user, this presentation provides clear and practical tips to help you reduce your cloud costs and get the most out of your budget.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Recently uploaded (20)
SAP S/4 HANA sourcing and procurement to Public cloud
SAP S/4 HANA sourcing and procurement to Public cloud
Â
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
Â
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Â
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
Â
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Â
Trusted Execution Environment for Decentralized Process Mining
Trusted Execution Environment for Decentralized Process Mining
Â
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Â
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Â
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
“Temporal Event Neural Networks: A More Efficient Alternative to the Transfor...
Â
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Â
JavaLand 2024: Application Development Green Masterplan
JavaLand 2024: Application Development Green Masterplan
Â
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Â
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Salesforce Integration for Bonterra Impact Management (fka Social Solutions A...
Â
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Â
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Â
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Â
Week #12 article #3
- 1. Pacific Ring of Fire and earthquakes
- 2. Introduction On the earth, there Pacific Ring of Fire, also it is called an earthquake belt, large earthquakes occurred there.
- 3. Features of Pacific Ring of Fire 1 â—Ź Pacific Ring of Fire is a large basin of the Pacific Ocean, in this area, large earthquakes and volcanic eruptions occur. â—Ź Pacific Ring of Fire is influenced by volcanic arc, volcanic belts and plate movement.
- 4. Features of Pacific Ring of Fire 2 â—Ź Pacific Ring of Fire has 425 volcanoes and make over 75% of the active and dormant volcanoes that there are all over the world. â—Ź It is called the circum-Pacific belt or the circum-Pacific seismic belt.
- 5. What happen on Pacific Ring of Fire? â—Ź About 90%of the world's earthquakes and 80% of the world's largest earthquakes occur along this zone. â—Ź The movement of plate tectonics and collisions of lithospheric plate direct influence Pacific Ring of Fire.
- 6. Why large earthquakes occur? â—Ź Various plates that cover surface of the earth like a puzzle are always moving and subduct under other plates. â—Ź Result of this reason, there are large earthquakes at this boundary.
- 7. Nuclear power plant and Pacific Ring of Fire â—Ź If there are nuclear power plants in countries that on boundaries of plates, it is high risk. â—Ź Those countries should other generation system except for atomic enegy.
- 8. Conclusion The way of generation differ from other countries, but if we don't consider effect by earthquakes in countries on boundaries of plates, there will be serious damages.