Applied Broadband TM Forum IPDR deployment update
•
0 likes•777 views
This document summarizes the current state and future of IPDR technology in cable broadband networks. It discusses the large footprint of IPDR deployment across major cable companies and CMTS vendors. Popular current uses of IPDR data include capacity management and subscriber analytics. Future potential uses include metered billing and service assurance. The large volume of machine data generated by IPDR implementations from tens of millions of cable modems is highlighted. Ongoing development of IPDR standards and enhancements requested by cable operators around security, rate limiting and other areas are also outlined. In summary, the presentation conveys that IPDR has become widely adopted with many potential use cases, and continued evolution is needed to address the growing scale of IPDR big data
Report
Share
Report
Share
Download to read offline
Recommended
Internet Protocol Detail Record
IPDR provides information about IP-based service usage and performance. It is created by networking devices like cable modems and set-top boxes. IPDR data is used by operations and business support systems and follows a defined schema for documents. IPDR has been adopted by standards bodies and the telecommunications industry for accounting and billing of services like voice over IP. Different accounting models exist such as paying per time period, data volume, or flat rates. The IPDR approach defines the service, data model, encoding, and transport.
Gi - Fi Technology
This document summarizes a presentation about Gi-Fi networking technology. It lists Tapesh V. Chalisgaonkar and Suraj D. Sirsat as presenters guided by Miss. R.S. Lande and Mr. A. S. Dhakade. The contents section lists topics like the technologies used, why Gi-Fi, a comparison of Bluetooth and Wi-Fi, an introduction to Gi-Fi, its features, applications, and conclusions. Key points about Gi-Fi are that it provides high-speed data transfer, low power consumption, high security, and is cost-effective with small device size. Gi-Fi could potentially bring wireless broadband connectivity to enterprises.
Ppt presentation
The document discusses light-based Wi-Fi (Li-Fi) which uses visible light communication and LED lamps to transmit data wirelessly. It notes that Li-Fi has significantly higher capacity than radio-based Wi-Fi as the light spectrum is much larger. It also describes how Li-Fi has advantages over Wi-Fi such as better security since light cannot pass through walls to intercept signals. The document outlines some of the key components used in a Li-Fi system like LED lamps that can transmit data by varying in intensity and a photodetector that receives the signals.
Gifi technology full seminar report
GI-FI (Gigabit Fidelity) or Giga bit wireless refers to wireless communication at a data rate of more than one billion bits (gigabits) per second. GI-FI offers some advantages over WI-FI, a similar wireless technology. In that it offers faster information rate in GBPS, less power consumption and low cost for short range transmission as compare to current technology. GI-FI consists of a chip which has facility to deliver short-range multi gigabit data transfer in a local environment and compared to other technologies in the market it is ten times faster. GI-FI has the data transfer speed up to 5 GBPS within a short-range of 10 metres. It operates in 60 GHZ frequency band. GI-FI is developed on an integrated wireless transceiver chip. It has both transmitter and receiver, integrated on a single chip which is fabricated using the CMOS (complementary metal oxide semiconductor) process and it also consists of a small antenna. GI-FI allows transferring large videos, audio files, data files etc. within few seconds.
Gi Fi - Fastest Wireless Transfer Technology
Gi-Fi is a next generation wireless technology that allows data transfer speeds up to 5 gigabits per second within a 10 meter range. It aims to overcome the slow transfer speeds and high power consumption of existing technologies like Bluetooth and Wi-Fi. Gi-Fi operates using 60GHz frequency and supports the IEEE 802.15.3C standard. It is expected to become the dominant wireless networking technology within 5 years, enabling wirelessly connected homes and offices with fast, low-cost broadband access.
Gi fi technology
Gi-Fi is a next generation wireless technology that allows data transfer speeds up to 5 gigabits per second using a single-chip 60GHz transceiver. This is over 10 times faster than current wireless speeds and operates within a 10 meter range. Gi-Fi aims to provide high-speed wireless data transfer with low power consumption. It uses millimeter wave spectrum and supports the IEEE 802.15.3c standard. Potential applications include high-definition media streaming between devices and wireless transmission of large files. Gi-Fi is expected to become the dominant wireless technology within 5 years by providing low-cost, high-speed wireless connectivity for both home and enterprise use.
GI - FI
Gi-Fi is a wireless technology that provides data transfer rates of over 1 billion bits (1 gigabit) per second. It was developed by Professor Stan Skafidas in Australia to allow high-speed transfer of audio and video wirelessly up to 5 gigabits per second. Gi-Fi uses an ultra wide band architecture with integrated transceiver chips to transmit multiple signals simultaneously across separate frequencies for interference avoidance and faster data transmission rates than existing wireless technologies like Bluetooth and Wi-Fi, while achieving lower power consumption. Potential applications of Gi-Fi include wireless transfer for household appliances, office devices, video broadcasting, and inter-vehicle communication systems.
gi-fi :the next generation wireless technology
Gigabit Wireless is the world‟s first transceiver integrated on a single chip which operates at 60GHz
on the CMOS process. Wireless transfer of large files, audio and video data upto
5 gigabits per second is
possible with this chip. The cost of wireless transfer rate is one
-
tenth and it provides ten times faster speed
within a range of 10 meters. It uses a 5mm square chip and a 1mm wide antenna burning less than 2milli
w
atts of power to transmit data wirelessly over short distances, similar to Bluetooth. Gi
-
Fi technology
provides
various different features like
High speed of data transfer, Low power consumption, High security,
Cost effective, Small size, Quick
deployment, Highly portable, high mobility etc.
Recommended
Internet Protocol Detail Record
IPDR provides information about IP-based service usage and performance. It is created by networking devices like cable modems and set-top boxes. IPDR data is used by operations and business support systems and follows a defined schema for documents. IPDR has been adopted by standards bodies and the telecommunications industry for accounting and billing of services like voice over IP. Different accounting models exist such as paying per time period, data volume, or flat rates. The IPDR approach defines the service, data model, encoding, and transport.
Gi - Fi Technology
This document summarizes a presentation about Gi-Fi networking technology. It lists Tapesh V. Chalisgaonkar and Suraj D. Sirsat as presenters guided by Miss. R.S. Lande and Mr. A. S. Dhakade. The contents section lists topics like the technologies used, why Gi-Fi, a comparison of Bluetooth and Wi-Fi, an introduction to Gi-Fi, its features, applications, and conclusions. Key points about Gi-Fi are that it provides high-speed data transfer, low power consumption, high security, and is cost-effective with small device size. Gi-Fi could potentially bring wireless broadband connectivity to enterprises.
Ppt presentation
The document discusses light-based Wi-Fi (Li-Fi) which uses visible light communication and LED lamps to transmit data wirelessly. It notes that Li-Fi has significantly higher capacity than radio-based Wi-Fi as the light spectrum is much larger. It also describes how Li-Fi has advantages over Wi-Fi such as better security since light cannot pass through walls to intercept signals. The document outlines some of the key components used in a Li-Fi system like LED lamps that can transmit data by varying in intensity and a photodetector that receives the signals.
Gifi technology full seminar report
GI-FI (Gigabit Fidelity) or Giga bit wireless refers to wireless communication at a data rate of more than one billion bits (gigabits) per second. GI-FI offers some advantages over WI-FI, a similar wireless technology. In that it offers faster information rate in GBPS, less power consumption and low cost for short range transmission as compare to current technology. GI-FI consists of a chip which has facility to deliver short-range multi gigabit data transfer in a local environment and compared to other technologies in the market it is ten times faster. GI-FI has the data transfer speed up to 5 GBPS within a short-range of 10 metres. It operates in 60 GHZ frequency band. GI-FI is developed on an integrated wireless transceiver chip. It has both transmitter and receiver, integrated on a single chip which is fabricated using the CMOS (complementary metal oxide semiconductor) process and it also consists of a small antenna. GI-FI allows transferring large videos, audio files, data files etc. within few seconds.
Gi Fi - Fastest Wireless Transfer Technology
Gi-Fi is a next generation wireless technology that allows data transfer speeds up to 5 gigabits per second within a 10 meter range. It aims to overcome the slow transfer speeds and high power consumption of existing technologies like Bluetooth and Wi-Fi. Gi-Fi operates using 60GHz frequency and supports the IEEE 802.15.3C standard. It is expected to become the dominant wireless networking technology within 5 years, enabling wirelessly connected homes and offices with fast, low-cost broadband access.
Gi fi technology
Gi-Fi is a next generation wireless technology that allows data transfer speeds up to 5 gigabits per second using a single-chip 60GHz transceiver. This is over 10 times faster than current wireless speeds and operates within a 10 meter range. Gi-Fi aims to provide high-speed wireless data transfer with low power consumption. It uses millimeter wave spectrum and supports the IEEE 802.15.3c standard. Potential applications include high-definition media streaming between devices and wireless transmission of large files. Gi-Fi is expected to become the dominant wireless technology within 5 years by providing low-cost, high-speed wireless connectivity for both home and enterprise use.
GI - FI
Gi-Fi is a wireless technology that provides data transfer rates of over 1 billion bits (1 gigabit) per second. It was developed by Professor Stan Skafidas in Australia to allow high-speed transfer of audio and video wirelessly up to 5 gigabits per second. Gi-Fi uses an ultra wide band architecture with integrated transceiver chips to transmit multiple signals simultaneously across separate frequencies for interference avoidance and faster data transmission rates than existing wireless technologies like Bluetooth and Wi-Fi, while achieving lower power consumption. Potential applications of Gi-Fi include wireless transfer for household appliances, office devices, video broadcasting, and inter-vehicle communication systems.
gi-fi :the next generation wireless technology
Gigabit Wireless is the world‟s first transceiver integrated on a single chip which operates at 60GHz
on the CMOS process. Wireless transfer of large files, audio and video data upto
5 gigabits per second is
possible with this chip. The cost of wireless transfer rate is one
-
tenth and it provides ten times faster speed
within a range of 10 meters. It uses a 5mm square chip and a 1mm wide antenna burning less than 2milli
w
atts of power to transmit data wirelessly over short distances, similar to Bluetooth. Gi
-
Fi technology
provides
various different features like
High speed of data transfer, Low power consumption, High security,
Cost effective, Small size, Quick
deployment, Highly portable, high mobility etc.
Gi-Fi Technology Report
The document discusses Gi-Fi technology, which allows wireless transfer of audio and video data up to 5 gigabits per second using a chip that is 5mm square and consumes only 2 milliwatts of power. Gi-Fi provides many benefits such as high speed data transfer 10 times faster than Wi-Fi, low power consumption, small form factor, ease of deployment, and high security. It is predicted that Gi-Fi will revolutionize wireless networking in homes and offices and become the dominant wireless technology within 5 years.
Zeitgeist.2007
Gi-Fi is a new wireless technology that provides data transfer speeds of 5 gigabits per second within a 10 meter range using 2 watts of power. It uses the 60GHz millimeter wave spectrum and IEEE 802.15.3c standards. Gi-Fi has several advantages over existing technologies like Wi-Fi and WiMax such as higher speeds, lower power consumption, and smaller chip size. Potential applications include high speed data transfer between devices in the home or office for applications like streaming video wirelessly. Gi-Fi is expected to become a prominent wireless technology within the next five years as costs decrease and more companies develop Gi-Fi compatible devices.
Gi fi
Gi-Fi technology allows for wireless transfer of audio and video data at up to 5 GB per second, which is 10 times faster than current maximum wireless transfer rates. It operates using a single-chip transceiver at 60 GHz, achieving gigabit speeds within a 10 meter range. Compared to existing technologies like Bluetooth and Wi-Fi, Gi-Fi provides higher data transfer rates at lower power consumption. Its applications include wireless personal area networks, inter-vehicle communication, and high-speed transfer of video information.
Word format gi fi documentation
This document is a dissertation submitted by A. Linga Reddy and E. Vikram in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. It discusses the emerging wireless technology known as GI-FI (Gigabit Fidelity), which allows for wireless transfer of data at speeds up to 5 gigabits per second over short ranges of about 10 meters, using integrated transceivers operating at 60GHz. This new technology promises wireless connectivity in homes and offices without wires and at a lower cost than existing technologies such as Wi-Fi.
Gifi
GiFi is a new wireless technology that operates at 60 GHz frequency band to allow wireless transfer of audio and video data at speeds up to 5 Gbps. It was developed by Professor Stan Skafidas to have higher data transfer rates than Bluetooth and WiFi while using lower power. GiFi uses time-division duplex and its 60 GHz frequency band allows for high integration on a single chip and immunity from interference. It is well-suited for applications in wireless homes, offices, video transfer and more due to its high speeds, security, and small/low-cost devices. GiFi is expected to become the dominant wireless technology within five years.
gi-fi technology
This document summarizes a seminar on GI-FI (Gigabit Wireless) technology. It discusses how GI-FI uses 60GHz wireless signals to transmit data at gigabit speeds over short distances. The core components include subscriber stations that connect to multiple access points using the IEEE 802.15.3c standard. Applications include wireless connectivity in homes, offices, between devices and vehicles. Advantages are high speeds, security, low power and cost, while the main disadvantage is short range of transmission.
Gi fi Technology (next generation wireless technology)
Gi-Fi is a new wireless technology that allows data transfer speeds up to 5 gigabits per second over short ranges of about 10 meters. It operates at 60GHz frequency using CMOS chip technology. Gi-Fi provides significantly faster speeds than existing wireless technologies like Bluetooth and Wi-Fi while using less power. It is well-suited for applications like wireless transfer of high-definition video between devices in homes and offices. The presenter predicted that within five years, Gi-Fi will become the dominant technology for wireless networking due to its high speeds, low power use, and lower equipment costs compared to other technologies.
Gi-Fi ppt
GI-FI (Gigabit Fidelity) or Giga bit wireless refers to wireless communication at a data rate of more than one billion bits (gigabits) per second. GI-FI offers some advantages over WI-FI, a similar wireless technology. In that it offers faster information rate in GBPS, less power consumption and low cost for short range transmission as compare to current technology. GI-FI consists of a chip which has facility to deliver short-range multi gigabit data transfer in a local environment and compared to other technologies in the market it is ten times faster. GI-FI has the data transfer speed up to 5 GBPS within a short-range of 10 metres. It operates in 60 GHZ frequency band. GI-FI is developed on an integrated wireless transceiver chip. It has both transmitter and receiver, integrated on a single chip which is fabricated using the CMOS (complementary metal oxide semiconductor) process and it also consists of a small antenna. GI-FI allows transferring large videos, audio files, data files etc. within few seconds.
GiFi
Gi-Fi is a new wireless technology that offers faster data transfer speeds than Wi-Fi. It uses integrated transceiver chips and small antennas to transmit data at 5 Gbps within seconds. Gi-Fi operates at 60GHz which enables high-speed data rates and transfer of large files. It has advantages over Wi-Fi such as lower power consumption and cost for short-range communication. Gi-Fi is expected to become the dominant wireless technology within 5 years, enabling wireless homes and offices of the future with easy transfer of videos and files.
GIFI TECHNOLOGY
Gi-Fi is a new wireless technology that operates at 60GHz and allows data transfer rates up to 5 gigabits per second, which is 10 times faster than current wireless technologies. It uses a single-chip transceiver and small antennas to integrate transmitting and receiving capabilities. Gi-Fi works within short ranges of about 10 meters but provides high data security due to oxygen absorption at 60GHz. It is expected to be commercially available next year and become the dominant wireless technology within 5 years due to its high speeds, low power consumption, security, and low cost.
Gigabit Fidelity: The next generation wireless technology
This document discusses gigabit wireless (Gi-Fi) technology, a next generation wireless technology developed at the National ICT Research Centre in Australia. Gi-Fi uses a single-chip transceiver operating at 57-64 GHz to provide wireless transfer of audio and video data at speeds up to 5 Gbps over short ranges of 10 meters with low power consumption of under 2 mW. The technology offers higher data rates and lower power usage than existing wireless technologies like Bluetooth and Wi-Fi. Gi-Fi has applications for wireless transfer between devices in homes and offices and is expected to become the dominant wireless networking technology within five years.
gifi technology ppt
what is gifi?
GIFI stands for General Index of Financial Information.
The GIFI is a system that assigns a unique code to a list of items commonly found on income statements, balance sheets, and statements of earnings.
The purpose of the GIFI is to allow the CRA (Canada Revenue Agency) to collect and process financial information more efficiently. For instance, the GIFI lets the CRA validate tax table information electronically rather than manually.
Gifi
Gi-Fi is a new wireless technology that offers faster data transfer rates of up to 5 gigabits per second, ten times faster than current WiFi speeds. It utilizes a small chip and antenna to transmit data wirelessly over short distances of around 10 meters, with lower power consumption than WiFi. Gi-Fi integrated the transmitter and receiver onto a single chip using CMOS technology to allow for wireless transfer of large files like videos within seconds. It could enable wireless home networks of the future with high-speed broadband connections and the transfer of large files.
Gifi wireless Technology
Gi-Fi is a new wireless technology that operates at 60GHz and allows data transfer rates up to 5 gigabits per second over short ranges of around 10 meters. It is integrated onto a single chip using CMOS technology. Gi-Fi provides faster transfer speeds than existing technologies like Bluetooth and Wi-Fi while using less power. Potential applications include wireless transfer between household appliances, office devices, and high-definition video and audio content. Gi-Fi is expected to become the dominant wireless networking technology within the next five years.
Gi Fi technology
Gi-Fi is a new wireless technology that provides data transfer speeds of 5 gigabits per second over short ranges of 10 meters using low power consumption of 2 watts. It uses the 60Ghz millimeter wave spectrum and has several advantages over existing wireless technologies like Wi-Fi and Wi-Max, including higher speeds, lower power usage, and smaller device sizes. Gi-Fi is expected to become prominent within the next five years and enable applications like high-speed wireless LAN, wireless streaming, and wireless transfer of video and other large files.
Gi fi ppt final
This document discusses gigabit wireless (Gi-Fi) technology, which uses 60GHz frequency bands to provide wireless data transfer speeds up to 5Gbps, around 10 times faster than existing Wi-Fi technologies. It explains the working principles and components of Gi-Fi transmitters and receivers. Some key advantages are its small chip size, low power consumption, and high data security. Potential applications include wireless video and audio transfer for devices, offices, sports stadiums, and vehicle communication systems. The integrated Gi-Fi transceiver chip is expected to be commercially available by the end of the year.
Gifi
Gi-Fi is a new wireless technology that operates at 60GHz using a single-chip transceiver. It allows data transfer at up to 5 gigabits per second within 10 meters, 10 times faster than current wireless speeds. The small 5mm chip uses CMOS technology, making it inexpensive to produce and low power. Gi-Fi is expected to revolutionize wireless connectivity between devices in homes and offices by enabling truly wireless transfers of audio and video files.
Gi fi technology
The document discusses Gi-Fi technology, a wireless networking technology that operates in the 60GHz spectrum and is capable of multi-gigabit data transfer speeds. It provides a brief history of Gi-Fi development, outlines currently used wireless technologies, and describes Gi-Fi's potential advantages over Bluetooth and Wi-Fi in terms of speed, power consumption, and security. The document also covers Gi-Fi's architecture, features, applications for wireless homes and enterprises, and expectations for it to become the dominant wireless technology within five years.
Gi_Fi - The Wireless Tehcnology
This document discusses the next generation wireless technology called Gi-Fi. Gi-Fi allows wireless transfer of audio and video data at speeds up to 5 gigabits per second, which is 10 times faster than existing technologies like Wi-Fi. Researchers at Melbourne University developed a Gi-Fi chip that can transmit complex 60GHz signals at high speeds while being small enough to fit on a single silicon chip. Compared to Wi-Fi and Bluetooth, Gi-Fi provides higher data transfer rates, longer ranges, lower power consumption, lower costs, better security, and more flexibility without needing complex connections. The document outlines several applications for Gi-Fi in wireless networks, vehicle communication systems, households, and video information transfer.
Gi-Fi
Gi-Fi is a new wireless technology that allows data transfer speeds up to 5 gigabits per second within a 10 meter range, which is 10 times faster than current wireless speeds. It was developed in Australia and operates at 60GHz on a single-chip transceiver. Gi-Fi is expected to become the dominant wireless technology in the near future, bringing wireless broadband to homes and offices through uses like connecting appliances and transferring video/audio files quickly. It has advantages over existing wireless technologies like Bluetooth and Wi-Fi through higher speeds, lower power consumption, and small chip size.
DOCSIS 3.0 Broadband Intelligence using IPDR
When combined with DOCSIS 3.0, IPDR creates a powerful tool for Cable Service Providers. It is the most effective way to observe and manage networks, subscribers and traffic in an application agnostic manner. Providers can apply enhanced visibility to address new used cases in capacity management, service assurance and subscriber usage control. Further, IPDR enables broadband business intelligence - allowing new metrics and insights into business performance and overall subscriber experience.
Presented in this whitepaper is an overview of the enhanced DOCSIS 3.0 management capabilities introduced by IPDR. This includes an overview of IPDR's advanced Service Definitions and protocol modes along with a description of new use-cases in service and network management.
An investigation of how service providers can leverage Pipeline's unique capabilities to fully benefit from the rich intelligence data embedded in their DOCSIS 3.0 CMTS devices is also included.
Hadoop World 2011: Replacing RDB/DW with Hadoop and Hive for Telco Big Data -...
The document discusses migrating KT's CDR analysis system from a relational database to NexR's Hadoop-based Data Analytics Platform (NDAP). NDAP provides tools to help with the migration, including converting Oracle data and SQL queries to the Hive query language. The conversion process involves mapping data types, functions, and SQL syntax between Oracle and Hive. NDAP also includes performance monitoring and query optimization tools to help enterprise data engineers adapt to the new system.
More Related Content
What's hot
Gi-Fi Technology Report
The document discusses Gi-Fi technology, which allows wireless transfer of audio and video data up to 5 gigabits per second using a chip that is 5mm square and consumes only 2 milliwatts of power. Gi-Fi provides many benefits such as high speed data transfer 10 times faster than Wi-Fi, low power consumption, small form factor, ease of deployment, and high security. It is predicted that Gi-Fi will revolutionize wireless networking in homes and offices and become the dominant wireless technology within 5 years.
Zeitgeist.2007
Gi-Fi is a new wireless technology that provides data transfer speeds of 5 gigabits per second within a 10 meter range using 2 watts of power. It uses the 60GHz millimeter wave spectrum and IEEE 802.15.3c standards. Gi-Fi has several advantages over existing technologies like Wi-Fi and WiMax such as higher speeds, lower power consumption, and smaller chip size. Potential applications include high speed data transfer between devices in the home or office for applications like streaming video wirelessly. Gi-Fi is expected to become a prominent wireless technology within the next five years as costs decrease and more companies develop Gi-Fi compatible devices.
Gi fi
Gi-Fi technology allows for wireless transfer of audio and video data at up to 5 GB per second, which is 10 times faster than current maximum wireless transfer rates. It operates using a single-chip transceiver at 60 GHz, achieving gigabit speeds within a 10 meter range. Compared to existing technologies like Bluetooth and Wi-Fi, Gi-Fi provides higher data transfer rates at lower power consumption. Its applications include wireless personal area networks, inter-vehicle communication, and high-speed transfer of video information.
Word format gi fi documentation
This document is a dissertation submitted by A. Linga Reddy and E. Vikram in partial fulfillment of the requirements for a Bachelor of Technology degree in Electronics and Communication Engineering. It discusses the emerging wireless technology known as GI-FI (Gigabit Fidelity), which allows for wireless transfer of data at speeds up to 5 gigabits per second over short ranges of about 10 meters, using integrated transceivers operating at 60GHz. This new technology promises wireless connectivity in homes and offices without wires and at a lower cost than existing technologies such as Wi-Fi.
Gifi
GiFi is a new wireless technology that operates at 60 GHz frequency band to allow wireless transfer of audio and video data at speeds up to 5 Gbps. It was developed by Professor Stan Skafidas to have higher data transfer rates than Bluetooth and WiFi while using lower power. GiFi uses time-division duplex and its 60 GHz frequency band allows for high integration on a single chip and immunity from interference. It is well-suited for applications in wireless homes, offices, video transfer and more due to its high speeds, security, and small/low-cost devices. GiFi is expected to become the dominant wireless technology within five years.
gi-fi technology
This document summarizes a seminar on GI-FI (Gigabit Wireless) technology. It discusses how GI-FI uses 60GHz wireless signals to transmit data at gigabit speeds over short distances. The core components include subscriber stations that connect to multiple access points using the IEEE 802.15.3c standard. Applications include wireless connectivity in homes, offices, between devices and vehicles. Advantages are high speeds, security, low power and cost, while the main disadvantage is short range of transmission.
Gi fi Technology (next generation wireless technology)
Gi-Fi is a new wireless technology that allows data transfer speeds up to 5 gigabits per second over short ranges of about 10 meters. It operates at 60GHz frequency using CMOS chip technology. Gi-Fi provides significantly faster speeds than existing wireless technologies like Bluetooth and Wi-Fi while using less power. It is well-suited for applications like wireless transfer of high-definition video between devices in homes and offices. The presenter predicted that within five years, Gi-Fi will become the dominant technology for wireless networking due to its high speeds, low power use, and lower equipment costs compared to other technologies.
Gi-Fi ppt
GI-FI (Gigabit Fidelity) or Giga bit wireless refers to wireless communication at a data rate of more than one billion bits (gigabits) per second. GI-FI offers some advantages over WI-FI, a similar wireless technology. In that it offers faster information rate in GBPS, less power consumption and low cost for short range transmission as compare to current technology. GI-FI consists of a chip which has facility to deliver short-range multi gigabit data transfer in a local environment and compared to other technologies in the market it is ten times faster. GI-FI has the data transfer speed up to 5 GBPS within a short-range of 10 metres. It operates in 60 GHZ frequency band. GI-FI is developed on an integrated wireless transceiver chip. It has both transmitter and receiver, integrated on a single chip which is fabricated using the CMOS (complementary metal oxide semiconductor) process and it also consists of a small antenna. GI-FI allows transferring large videos, audio files, data files etc. within few seconds.
GiFi
Gi-Fi is a new wireless technology that offers faster data transfer speeds than Wi-Fi. It uses integrated transceiver chips and small antennas to transmit data at 5 Gbps within seconds. Gi-Fi operates at 60GHz which enables high-speed data rates and transfer of large files. It has advantages over Wi-Fi such as lower power consumption and cost for short-range communication. Gi-Fi is expected to become the dominant wireless technology within 5 years, enabling wireless homes and offices of the future with easy transfer of videos and files.
GIFI TECHNOLOGY
Gi-Fi is a new wireless technology that operates at 60GHz and allows data transfer rates up to 5 gigabits per second, which is 10 times faster than current wireless technologies. It uses a single-chip transceiver and small antennas to integrate transmitting and receiving capabilities. Gi-Fi works within short ranges of about 10 meters but provides high data security due to oxygen absorption at 60GHz. It is expected to be commercially available next year and become the dominant wireless technology within 5 years due to its high speeds, low power consumption, security, and low cost.
Gigabit Fidelity: The next generation wireless technology
This document discusses gigabit wireless (Gi-Fi) technology, a next generation wireless technology developed at the National ICT Research Centre in Australia. Gi-Fi uses a single-chip transceiver operating at 57-64 GHz to provide wireless transfer of audio and video data at speeds up to 5 Gbps over short ranges of 10 meters with low power consumption of under 2 mW. The technology offers higher data rates and lower power usage than existing wireless technologies like Bluetooth and Wi-Fi. Gi-Fi has applications for wireless transfer between devices in homes and offices and is expected to become the dominant wireless networking technology within five years.
gifi technology ppt
what is gifi?
GIFI stands for General Index of Financial Information.
The GIFI is a system that assigns a unique code to a list of items commonly found on income statements, balance sheets, and statements of earnings.
The purpose of the GIFI is to allow the CRA (Canada Revenue Agency) to collect and process financial information more efficiently. For instance, the GIFI lets the CRA validate tax table information electronically rather than manually.
Gifi
Gi-Fi is a new wireless technology that offers faster data transfer rates of up to 5 gigabits per second, ten times faster than current WiFi speeds. It utilizes a small chip and antenna to transmit data wirelessly over short distances of around 10 meters, with lower power consumption than WiFi. Gi-Fi integrated the transmitter and receiver onto a single chip using CMOS technology to allow for wireless transfer of large files like videos within seconds. It could enable wireless home networks of the future with high-speed broadband connections and the transfer of large files.
Gifi wireless Technology
Gi-Fi is a new wireless technology that operates at 60GHz and allows data transfer rates up to 5 gigabits per second over short ranges of around 10 meters. It is integrated onto a single chip using CMOS technology. Gi-Fi provides faster transfer speeds than existing technologies like Bluetooth and Wi-Fi while using less power. Potential applications include wireless transfer between household appliances, office devices, and high-definition video and audio content. Gi-Fi is expected to become the dominant wireless networking technology within the next five years.
Gi Fi technology
Gi-Fi is a new wireless technology that provides data transfer speeds of 5 gigabits per second over short ranges of 10 meters using low power consumption of 2 watts. It uses the 60Ghz millimeter wave spectrum and has several advantages over existing wireless technologies like Wi-Fi and Wi-Max, including higher speeds, lower power usage, and smaller device sizes. Gi-Fi is expected to become prominent within the next five years and enable applications like high-speed wireless LAN, wireless streaming, and wireless transfer of video and other large files.
Gi fi ppt final
This document discusses gigabit wireless (Gi-Fi) technology, which uses 60GHz frequency bands to provide wireless data transfer speeds up to 5Gbps, around 10 times faster than existing Wi-Fi technologies. It explains the working principles and components of Gi-Fi transmitters and receivers. Some key advantages are its small chip size, low power consumption, and high data security. Potential applications include wireless video and audio transfer for devices, offices, sports stadiums, and vehicle communication systems. The integrated Gi-Fi transceiver chip is expected to be commercially available by the end of the year.
Gifi
Gi-Fi is a new wireless technology that operates at 60GHz using a single-chip transceiver. It allows data transfer at up to 5 gigabits per second within 10 meters, 10 times faster than current wireless speeds. The small 5mm chip uses CMOS technology, making it inexpensive to produce and low power. Gi-Fi is expected to revolutionize wireless connectivity between devices in homes and offices by enabling truly wireless transfers of audio and video files.
Gi fi technology
The document discusses Gi-Fi technology, a wireless networking technology that operates in the 60GHz spectrum and is capable of multi-gigabit data transfer speeds. It provides a brief history of Gi-Fi development, outlines currently used wireless technologies, and describes Gi-Fi's potential advantages over Bluetooth and Wi-Fi in terms of speed, power consumption, and security. The document also covers Gi-Fi's architecture, features, applications for wireless homes and enterprises, and expectations for it to become the dominant wireless technology within five years.
Gi_Fi - The Wireless Tehcnology
This document discusses the next generation wireless technology called Gi-Fi. Gi-Fi allows wireless transfer of audio and video data at speeds up to 5 gigabits per second, which is 10 times faster than existing technologies like Wi-Fi. Researchers at Melbourne University developed a Gi-Fi chip that can transmit complex 60GHz signals at high speeds while being small enough to fit on a single silicon chip. Compared to Wi-Fi and Bluetooth, Gi-Fi provides higher data transfer rates, longer ranges, lower power consumption, lower costs, better security, and more flexibility without needing complex connections. The document outlines several applications for Gi-Fi in wireless networks, vehicle communication systems, households, and video information transfer.
Gi-Fi
Gi-Fi is a new wireless technology that allows data transfer speeds up to 5 gigabits per second within a 10 meter range, which is 10 times faster than current wireless speeds. It was developed in Australia and operates at 60GHz on a single-chip transceiver. Gi-Fi is expected to become the dominant wireless technology in the near future, bringing wireless broadband to homes and offices through uses like connecting appliances and transferring video/audio files quickly. It has advantages over existing wireless technologies like Bluetooth and Wi-Fi through higher speeds, lower power consumption, and small chip size.
What's hot (20)
Gi fi Technology (next generation wireless technology)
Gi fi Technology (next generation wireless technology)
Gigabit Fidelity: The next generation wireless technology
Gigabit Fidelity: The next generation wireless technology
Similar to Applied Broadband TM Forum IPDR deployment update
DOCSIS 3.0 Broadband Intelligence using IPDR
When combined with DOCSIS 3.0, IPDR creates a powerful tool for Cable Service Providers. It is the most effective way to observe and manage networks, subscribers and traffic in an application agnostic manner. Providers can apply enhanced visibility to address new used cases in capacity management, service assurance and subscriber usage control. Further, IPDR enables broadband business intelligence - allowing new metrics and insights into business performance and overall subscriber experience.
Presented in this whitepaper is an overview of the enhanced DOCSIS 3.0 management capabilities introduced by IPDR. This includes an overview of IPDR's advanced Service Definitions and protocol modes along with a description of new use-cases in service and network management.
An investigation of how service providers can leverage Pipeline's unique capabilities to fully benefit from the rich intelligence data embedded in their DOCSIS 3.0 CMTS devices is also included.
Hadoop World 2011: Replacing RDB/DW with Hadoop and Hive for Telco Big Data -...
The document discusses migrating KT's CDR analysis system from a relational database to NexR's Hadoop-based Data Analytics Platform (NDAP). NDAP provides tools to help with the migration, including converting Oracle data and SQL queries to the Hive query language. The conversion process involves mapping data types, functions, and SQL syntax between Oracle and Hive. NDAP also includes performance monitoring and query optimization tools to help enterprise data engineers adapt to the new system.
Is Your Network Ready?
Fibre channel is on the rise, and the data center transformation is upon us! Join Brocade's Technical Development Manager, Mike Naylor as he explains how Brocade Gen5 Fabric can simplify your network infrastructure, reduce costs and maximize uptime.
B4 connecting your non profit in the digital age hand out - connecting your...
B4 connecting your non profit in the digital age hand out - connecting your...Housing Assistance Council
This document discusses connecting nonprofits in the digital age through broadband access. It defines broadband and explains its importance for education, healthcare, and commerce. Rural broadband deployment faces challenges due to higher costs and lower revenues over longer distances with fewer customers. The document recommends that rural housing providers advocate for broadband, install wired infrastructure when possible, and discuss connectivity options with local providers.Move your Data Center to the Cloud
The document discusses moving a data center to the cloud. It outlines an agenda for analyzing such a transition, including considering cloud security, understanding the current environment, and comparing costs and contracts. The analysis section lists many line items to compare between the current data center and cloud providers, such as infrastructure, licensing costs, disaster recovery, and support. Conducting a thorough analysis of needs, strengths, and weaknesses is important to understand if cloud computing is suitable.
Dwdm cisco
This document introduces dense wavelength division multiplexing (DWDM) technology. It discusses how DWDM addresses the need for increased bandwidth in metropolitan area networks (MANs) driven by economic forces such as the exponential growth of data traffic and bandwidth demand. DWDM provides advantages over traditional time-division multiplexing (TDM) by allowing multiple optical carrier signals to be transmitted simultaneously over the same fiber. This significantly increases fiber capacity and enhances performance and reliability for MAN applications.
Smart power grid
The document discusses the need for and vision of smart power grids. It notes that increasing population and energy demand, exhausting non-renewable resources, and the negative environmental impacts of current power generation require more reliable, efficient, and sustainable energy infrastructure. A smart grid aims to optimize grid use, improve efficiency and security, better align supply and demand, enable distributed renewable generation, and empower customers. It will feature more flexible, accessible, and reliable systems based on open standards to facilitate innovation.
Interop 2006: Evolution of the Networking Industry
This was a presentation from 2006 where (starting on slide 30) I described how the way consumer networking vendors built their products would ultimately upend the way enterprise vendors built products. Today, the hype around SDN, commodity switching products, and linux based network operating systems is making much of this come true.
This presentation was first given in May 2006 at the Interop trade show.
Slide 30, is where I talked about how the networking market would split from vertically organized vendors to horizontally specialized vendors. I predicted this transition would take 10 years.
At the time, the use of merchant silicon in datacenter and enterprise switching products was a rarity. Today, it is common. Then linux derivative network OSes were limited to consumer products, today they are taking over large scale cloud datacenters.
The networking market hasn’t come as far as I expected in 10 years, but it’s pretty cool much of this either came true or is on the cusp of coming true. Much more change is under way.
How Data Center Traffic is Changing Your Network by KC Lim
This document discusses how data center traffic is changing networks and outlines key trends driving growth in the data center interconnect market. It notes that global data center IP traffic and storage capacity are growing significantly each year. It also discusses the various participants in the data center ecosystem like cloud/internet providers, carriers, and data center operators. The document advocates for disaggregated, open line systems that use multi-vendor components to provide more flexibility and reduce costs compared to traditional integrated DWDM network solutions. It provides examples of how an open line system could be deployed over existing ROADM networks from vendors like Ciena, Cyan, Juniper and BTI.
Background scenario drivers and critical issues with a focus on technology ...
This document discusses technology trends driving changes in systems architecture. It notes rapid growth in computation, bandwidth, storage, and display capabilities (supply), creating demand from various stakeholders including corporations, individuals, and mobile users. This is making systems more complex, distributed, and community-oriented. It advocates for loosely coupled, service-oriented architectures and agile development processes to build scalable, interoperable, and manageable systems. Key roles discussed include web developers, utility providers, software providers, and virtual communities.
Building the Next Generation Data Center
Salient has developed one of the most advanced and secure datacenter concepts in the world. MN-NAP is strategically located outside of the Minneapolis / St. Paul area, making it the only datacenter of its type in the North-Central region. Its groundbreaking design and unmatched product offerings make it the premium selection for large publuc and private entities, that require the most extreme of today's power, space and bandwidth-intensive applications.
OMG DDS: The Data Distribution Service for Real-Time Systems
These slides were presented at the CANOE Summer School in OSLO (http://bit.ly/pYSD2) and provide an introduction to the OMG DDS Pub/Sub Standard.
Disaster Recovery Trends In India - Future Outlook
Ctrls explains the present situation to the future trends which are to hit datacenters in India shortly. The PPT also gives information on the Indian, Asian and World Reports on the present situation and the future prediction with regards to the Datacenter landscape.
Sustainability, the all fiber future
This document summarizes an event for the Infrastructure Society discussing sustainability and fiber networks. The event will take place at the University of Phoenix and feature panelists from ADVA Optical Networking, FiberLight, IP UtiliNET, and Sunesys. The Society's mission is to be an expert resource on Georgia's infrastructure like roads, power, water, real estate, and fiber to help attract high-tech businesses. The board members are listed. Upcoming 2011 events are also summarized on topics like wireless technology, public safety, transportation, airports, energy industry, network hardware, and future office parks.
Open Access Networks 20121128
a2b Fiber is a builder of next generation open access fibre optic networks providing dark fibre to communications service providers and private network operators in BC. a2b Fiber aims to address barriers to entry in the telecom market by building an open access fibre network and leasing dark fibre to service providers. This reduces costs for providers and increases competition compared to each provider building their own network infrastructure.
Data Centre Interconnect (DCI) with X86’s DCI Solution by Raja Akmal, X86 Net...
1. Data centre interconnect (DCI) technology connects multiple data centres using high-speed connectivity to allow sharing of resources. DCI adoption is growing rapidly to support increased bandwidth consumption from cloud computing and distributed infrastructure.
2. X86 Network provides DCI solutions in Malaysia, Singapore, and globally to over 100 data centres. Their solutions include dedicated connectivity, internet exchange extensions, and disaster recovery capabilities.
3. X86's DCI offerings are supported by their 24/7 network operations centre and next business day activations. Their global network utilizes coherent and DWDM technology to provide highly reliable, high-capacity connectivity between customer data centres.
Ieee pimrc 2011 M2M challenges - WWRF - exalted
- Energy monitoring
- Load management
- Fault detection
- Security
- Comfort
- Efficiency
- Remote access
- Interoperability
12/09/2011 Wireless World Research Forum 42
Smart Building:
Key Technologies
- Building Management System (BMS)
- Energy Management System (EMS)
- Heating, Ventilation and Air Conditioning (HVAC)
- Lighting Control
- Access Control & Security
- Elevators & Escalators
- Fire Detection & Suppression
- CCTV Surveillance
- Plug & Play Sensors
- Standards: BACnet, LonWorks, KNX, Modbus, OPC
-
Asymmetric digital subscriber line
ADSL technology allows existing twisted-pair telephone lines to transmit high-speed data, up to 6 Mbps downstream and 640 kbps upstream, providing over 50 times more bandwidth capacity without new cabling infrastructure. ADSL does this through asymmetric digital subscriber line technology, allocating more bandwidth downstream for high-bandwidth activities like video streaming while maintaining traditional telephone services. By bringing high-speed internet and multimedia to homes and businesses over existing phone lines, ADSL plays a crucial role in expanding access and enabling new services.
IoT from beyond the edge final, by Scott A. Nelson
The Internet of Things from beyond the edge
A semiconductor manufacturer’s view
Scott A Nelson
SkyWater Technology Foundry designs and manufactures a wide range of novel technologies for consumer, industrial, military, and automotive applications including:
CMOS semiconductors
Mixed signal and RF devices
MEMs
Sensing and imaging
Silicon Photonics
Superconducting/Quantum computing
Launched March 1, 2017
Formerly Cypress Minnesota Inc.
my seminar in aits on mobile computing
This document provides an overview of mobile computing and CDPD technology. It discusses the existing cellular network architecture including circuit switching and packet switching. It then describes CDPD technology, how it utilizes idle time between voice signals on cellular networks. The CDPD network hierarchy is explained including mobile end users, data base stations, intermediate systems, and the backbone. Applications of mobile computing are listed. Limitations and the future of mobile computing are also discussed.
Similar to Applied Broadband TM Forum IPDR deployment update (20)
Hadoop World 2011: Replacing RDB/DW with Hadoop and Hive for Telco Big Data -...
Hadoop World 2011: Replacing RDB/DW with Hadoop and Hive for Telco Big Data -...
B4 connecting your non profit in the digital age hand out - connecting your...
B4 connecting your non profit in the digital age hand out - connecting your...
Interop 2006: Evolution of the Networking Industry
Interop 2006: Evolution of the Networking Industry
How Data Center Traffic is Changing Your Network by KC Lim
How Data Center Traffic is Changing Your Network by KC Lim
Background scenario drivers and critical issues with a focus on technology ...
Background scenario drivers and critical issues with a focus on technology ...
OMG DDS: The Data Distribution Service for Real-Time Systems
OMG DDS: The Data Distribution Service for Real-Time Systems
Disaster Recovery Trends In India - Future Outlook
Disaster Recovery Trends In India - Future Outlook
Data Centre Interconnect (DCI) with X86’s DCI Solution by Raja Akmal, X86 Net...
Data Centre Interconnect (DCI) with X86’s DCI Solution by Raja Akmal, X86 Net...
IoT from beyond the edge final, by Scott A. Nelson
IoT from beyond the edge final, by Scott A. Nelson
Recently uploaded
Programming Foundation Models with DSPy - Meetup Slides
Prompting language models is hard, while programming language models is easy. In this talk, I will discuss the state-of-the-art framework DSPy for programming foundation models with its powerful optimizers and runtime constraint system.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Project Management Semester Long Project - Acuity
Acuity is an innovative learning app designed to transform the way you engage with knowledge. Powered by AI technology, Acuity takes complex topics and distills them into concise, interactive summaries that are easy to read & understand. Whether you're exploring the depths of quantum mechanics or seeking insight into historical events, Acuity provides the key information you need without the burden of lengthy texts.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
How to Get CNIC Information System with Paksim Ga.pptx
Pakdata Cf is a groundbreaking system designed to streamline and facilitate access to CNIC information. This innovative platform leverages advanced technology to provide users with efficient and secure access to their CNIC details.
Digital Marketing Trends in 2024 | Guide for Staying Ahead
https://www.wask.co/ebooks/digital-marketing-trends-in-2024
Feeling lost in the digital marketing whirlwind of 2024? Technology is changing, consumer habits are evolving, and staying ahead of the curve feels like a never-ending pursuit. This e-book is your compass. Dive into actionable insights to handle the complexities of modern marketing. From hyper-personalization to the power of user-generated content, learn how to build long-term relationships with your audience and unlock the secrets to success in the ever-shifting digital landscape.
Webinar: Designing a schema for a Data Warehouse
Are you new to data warehouses (DWH)? Do you need to check whether your data warehouse follows the best practices for a good design? In both cases, this webinar is for you.
A data warehouse is a central relational database that contains all measurements about a business or an organisation. This data comes from a variety of heterogeneous data sources, which includes databases of any type that back the applications used by the company, data files exported by some applications, or APIs provided by internal or external services.
But designing a data warehouse correctly is a hard task, which requires gathering information about the business processes that need to be analysed in the first place. These processes must be translated into so-called star schemas, which means, denormalised databases where each table represents a dimension or facts.
We will discuss these topics:
- How to gather information about a business;
- Understanding dictionaries and how to identify business entities;
- Dimensions and facts;
- Setting a table granularity;
- Types of facts;
- Types of dimensions;
- Snowflakes and how to avoid them;
- Expanding existing dimensions and facts.
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
ここ3000字までしか入らないけどタイトルの方がたくさん文字入ると思います。
UiPath Test Automation using UiPath Test Suite series, part 6
Welcome to UiPath Test Automation using UiPath Test Suite series part 6. In this session, we will cover Test Automation with generative AI and Open AI.
UiPath Test Automation with generative AI and Open AI webinar offers an in-depth exploration of leveraging cutting-edge technologies for test automation within the UiPath platform. Attendees will delve into the integration of generative AI, a test automation solution, with Open AI advanced natural language processing capabilities.
Throughout the session, participants will discover how this synergy empowers testers to automate repetitive tasks, enhance testing accuracy, and expedite the software testing life cycle. Topics covered include the seamless integration process, practical use cases, and the benefits of harnessing AI-driven automation for UiPath testing initiatives. By attending this webinar, testers, and automation professionals can gain valuable insights into harnessing the power of AI to optimize their test automation workflows within the UiPath ecosystem, ultimately driving efficiency and quality in software development processes.
What will you get from this session?
1. Insights into integrating generative AI.
2. Understanding how this integration enhances test automation within the UiPath platform
3. Practical demonstrations
4. Exploration of real-world use cases illustrating the benefits of AI-driven test automation for UiPath
Topics covered:
What is generative AI
Test Automation with generative AI and Open AI.
UiPath integration with generative AI
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Recently uploaded (20)
Programming Foundation Models with DSPy - Meetup Slides
Programming Foundation Models with DSPy - Meetup Slides
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdf
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
How to Get CNIC Information System with Paksim Ga.pptx
How to Get CNIC Information System with Paksim Ga.pptx
Digital Marketing Trends in 2024 | Guide for Staying Ahead
Digital Marketing Trends in 2024 | Guide for Staying Ahead
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
みなさんこんにちはこれ何文字まで入るの？40文字以下不可とか本当に意味わからないけどこれ限界文字数書いてないからマジでやばい文字数いけるんじゃないの？えこ...
UiPath Test Automation using UiPath Test Suite series, part 6
UiPath Test Automation using UiPath Test Suite series, part 6
Applied Broadband TM Forum IPDR deployment update
- 1. IPDR Technology Readout Jason K. Schnitzer Founder & Principal © 2011 Applied Broadband, Inc.
- 2. In the next 20 minutes … » Current US cable market IPDR footprint » Hot IPDR use cases for 2011 » IPDR machine data deluge » DOCSIS™ 3.0 IPDR Engineering Changes » Other IPDR MSO enhancement requests » Questions? 2/12/12 2
- 3. US cable market IPDR footprint 44.4 Million HSI Subscribers + 23.9 Million VoIP Subscribers 68.3 Million DOCSIS CM devices online today * Sources: NCTA, SNL Kagan 2/12/12 3
- 4. US Cable’s IPDR footprint 2011 BROAD ADOPTION ACROSS ALL MAJOR DOCSIS™ CMTS VENDORS Majority of top 10 USA MSOs deploying IPDR today – up to a 54 Million CM device IPDR footprint* • Sources: NCTA, SNL Kagan, public statements, annual reports, & corporate filings • DOCSIS™ is a registered trademark of CableLabs 2/12/12 4
- 5. Motivation driving IPDR use cases DOCSIS DOCSIS downstream upstream 2/12/12 5
- 6. Hot IPDR use cases in Cable » Today Service aware capacity management DOCSIS aware subscriber usage monitoring Policy-based congestion mitigation (aka. ‘fair use’) DOCSIS network intelligence & subscriber analytics » Tomorrow Node aware capacity management Metered billing Service assurance & proactive network maintenance 2/12/12 6
- 7. IPDR Machine Data Deluge Continuing with our example: 54 Million CM devices in 2011 Total M2M IPDR data* 2.20 TB/day Oxford Encyclopedic ~1 PB/year Dictionary 540 MB • Based on two statically provisioned service flows per CM and a 10% call probability per MTA 2/12/12 7
- 8. DOCSIS 3.0 IPDR Engineering Changes Engineering Status Change OSSIv3.0-N-10.0968-2 Spectrum measurement, CM US, US/DS utilization and logging service changes OSSIv3.0-N-10.0970-2 Update minimum intervals for IPDR Time Interval Session types OSSIv3.0-N-10.0972-2 Correct references to SAMIS Session behavior OSSIv3.0-R-10.0971-1 SAMIS update for Multicast traffic accounting 2/12/12 8
- 9. Other MSO IPDR enhancement requests » Security Current ACL approach in connect message Address securing connection between CMTS exporter and collector Leverage standard TLS toolkit » Class based rate limiting Large numbers of embedded CM devices Some Service Flows more interesting than others (eg. CM vs. ASTB) Desire method to configure time based record export intervals on a per Service Class (Name) basis 2/12/12 9
- 10. In Summary » IPDR has arrived » Use cases are many » ‘Big Data’ is getting bigger » Continued IPDR enhancement desired 2/12/12 10
- 11. Jason K. Schnitzer Applied Broadband, Inc. 1881 9th street | suite 125 Thank you! Boulder, Colorado 80302, USA p | 303.449.2033 f | 303.449.0119 e | jason@appliedbroadband.com w | www.appliedbroadband.com