This study experimentally investigates the strength properties of concrete with partial replacements of cement by wood ash and fine aggregate by copper slag. Wood ash and copper slag are industrial byproducts that are often disposed of as waste. Here, cement is replaced with wood ash at rates from 6-36% and fine aggregate is replaced with copper slag at rates from 9-54%. The compressive strength, flexural strength, and split tensile strength of the concrete mixtures are then tested at various curing periods. The results show that up to a certain threshold, the wood ash and copper slag replacements can improve the strength properties of the concrete while also providing an environmentally-friendly use for industrial waste materials.
Natural resources are vanishing universal while at the similar time the generated wastes from the industry are
growing substantially. The sustainable development for construction requires the use of nonconventional and
innovative materials, and recycling of demolished and waste materials so to compensate the lack of natural
resources and to find alternative ways of conserving the environment. So, this paper presents the consequences
of an experimental study carried out to evaluate the power-driven properties of concrete mixtures in which fine
aggregate (sand) was swapped with Copper Slag (CS) while coarse aggregates were swapped by used and
recycled concrete coarse aggregate (RCA) from demolished structure or building. Both the coarse and fine
aggregate were replaced with percentages 0% (for the control mixture), 10%, 20%, 30%, of Copper Slag by
weight ratio. Tests were performed for properties of new concrete and toughened Concrete simultaneously.
Slump test was conducted to regulate the workability of the several design concrete mix. Compressive strength
and split tensile strength were determined at 7, 28 days of curing completely.
The results show that workability shrinkages slightly with rise in Copper Slag ratio, however workability for
the illustrations were within the prearranged boundary for M25 concrete. Test results shown substantial
enhancement in the strength assets of simple concrete by the insertion of CS alone whereas a reverse tendency
in observed for growing proportion of RCA in the illustration. The result of this study work displayed that
Copper slag in addition recycled concrete aggregate can be efficiently used in physical concrete as a standby of
coarse aggregate and fine aggregate (sand) respectively.
Experimental Study of using Pond Ash as Partial Replacement for Fine Aggregat...YogeshIJTSRD
Production of one ton of Portland cement emits one ton of CO2 and different greenhouse gases main to atmospheric pollution. Hence the want arises to exchange cement with some different cementitious material. Disposal of Pond ash which is combination of Fly ash andamp Bottom ash into massive lakes reasons land air pollution and different environmental effects. The cause of this find out about is to locate the suitability of silica fume as a alternative cloth for cement and pond ash as a alternative fabric for first rate combination in concrete except compromising the power andamp sturdiness of traditional concrete. The bodily and chemical property of silica fume and pond ash is to be studied and each the industrial wastes are used to substitute the cement and great aggregate. Pond ash is in part changed for fantastic mixture with the aid of various percentages 10 to 30 , additionally silica fume is introduced by way of 10 to 20 by way of the weight of cement. The specimens will be examined for its mechanical houses such as compressive strength, cut up tensile energy and flexural electricity on 7, 28 andamp 56 days. After identifying the houses of the concrete mixes, the foremost share of alternative tiers of silica fume and pond ash will be carried out and Reinforced Concrete Beams had been forged to decide the flexural behaviour for the optimized concrete Mix. Mr. K. Soundirarajan | Telem Shidartha "Experimental Study of using Pond Ash as Partial Replacement for Fine Aggregate in a Silica Fume Based Concrete" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45048.pdf Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/45048/experimental-study-of-using-pond-ash-as-partial-replacement-for-fine-aggregate-in-a-silica-fume-based-concrete/mr-k-soundirarajan
Natural resources are vanishing universal while at the similar time the generated wastes from the industry are
growing substantially. The sustainable development for construction requires the use of nonconventional and
innovative materials, and recycling of demolished and waste materials so to compensate the lack of natural
resources and to find alternative ways of conserving the environment. So, this paper presents the consequences
of an experimental study carried out to evaluate the power-driven properties of concrete mixtures in which fine
aggregate (sand) was swapped with Copper Slag (CS) while coarse aggregates were swapped by used and
recycled concrete coarse aggregate (RCA) from demolished structure or building. Both the coarse and fine
aggregate were replaced with percentages 0% (for the control mixture), 10%, 20%, 30%, of Copper Slag by
weight ratio. Tests were performed for properties of new concrete and toughened Concrete simultaneously.
Slump test was conducted to regulate the workability of the several design concrete mix. Compressive strength
and split tensile strength were determined at 7, 28 days of curing completely.
The results show that workability shrinkages slightly with rise in Copper Slag ratio, however workability for
the illustrations were within the prearranged boundary for M25 concrete. Test results shown substantial
enhancement in the strength assets of simple concrete by the insertion of CS alone whereas a reverse tendency
in observed for growing proportion of RCA in the illustration. The result of this study work displayed that
Copper slag in addition recycled concrete aggregate can be efficiently used in physical concrete as a standby of
coarse aggregate and fine aggregate (sand) respectively.
Experimental Study of using Pond Ash as Partial Replacement for Fine Aggregat...YogeshIJTSRD
Production of one ton of Portland cement emits one ton of CO2 and different greenhouse gases main to atmospheric pollution. Hence the want arises to exchange cement with some different cementitious material. Disposal of Pond ash which is combination of Fly ash andamp Bottom ash into massive lakes reasons land air pollution and different environmental effects. The cause of this find out about is to locate the suitability of silica fume as a alternative cloth for cement and pond ash as a alternative fabric for first rate combination in concrete except compromising the power andamp sturdiness of traditional concrete. The bodily and chemical property of silica fume and pond ash is to be studied and each the industrial wastes are used to substitute the cement and great aggregate. Pond ash is in part changed for fantastic mixture with the aid of various percentages 10 to 30 , additionally silica fume is introduced by way of 10 to 20 by way of the weight of cement. The specimens will be examined for its mechanical houses such as compressive strength, cut up tensile energy and flexural electricity on 7, 28 andamp 56 days. After identifying the houses of the concrete mixes, the foremost share of alternative tiers of silica fume and pond ash will be carried out and Reinforced Concrete Beams had been forged to decide the flexural behaviour for the optimized concrete Mix. Mr. K. Soundirarajan | Telem Shidartha "Experimental Study of using Pond Ash as Partial Replacement for Fine Aggregate in a Silica Fume Based Concrete" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45048.pdf Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/45048/experimental-study-of-using-pond-ash-as-partial-replacement-for-fine-aggregate-in-a-silica-fume-based-concrete/mr-k-soundirarajan
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.