- The candidate has over 9 years of experience as a Senior Welding Engineer with expertise in welding inspection, quality control, and assurance for various materials and industries. - Key responsibilities include qualifying welding procedures, establishing welding and inspection plans, conducting audits, managing quality personnel, and ensuring compliance with standards. - Notable accomplishments include supporting certification renewals and audits for ASME, ISO, API, and other standards at previous employers.

1. Key Skills Profile Summary
• Currently working as Senior Welding Engineer (QA/QC Superintendent)
with Ramsis Engineering, W.L.L. Bahrain; gained over 9 years of
experience in Welding
• PQRS specialist for CS, SS, Duplex, Super/Hyper Duplex, Low allow, Cu
Alloy, Ni Alloy, Inconel, Titanium and so on. as per ASME SEC IX, API1104
and Structural PQR for CS as per BS EN
• Established PQR, WPS, WPQ, Mock-up, Weld Test Plan and Weld Map
• Guided the control of repair welding, review & interpretation and witness
of other NDT for piping and structural work
• Performed inspection of welding consumables, in process welding, visual
weld check, and so on
• Conducted material inspection in compliance with purchase order, review
& verification of material test certificates for various materials
• Prioritized quality assurance responsibilities based on the integration of
new designs and products into current production schedule
• Experience in inspecting and testing the products at various stages in the
production process
• Provided administrative and technical direction to all quality control
personnel encompassing personnel administration, resolution of technical
problems, development / approval of in-house training, and so on
• Provided technical support for writing Quality Management System
Standards as per ISO and other international codes.
• Conducting internal quality audit as per company QMS and ISO 9001
requirements, prepared audit reports, handling NCRs.
• Took part in external quality audits for ISO, ASME, API certifications.
Career Timeline
Welding Management
Quality Control & Analysis
Inspection & Testing
Design Engineering
Project Management
Documentation
Liaison & Coordination
Training & Development
Team Building & Leadership
7
Months
1.3 Years 4.9 Years
2.2 Years 1.5 Years
AMIT C. BAMANYA
Welding Management
Proficient in Process Piping Construction, Pressure vessels, Heat Exchangers, Ground
Storage Tanks, Stacks, Cross Country Pipe lines, Station Piping, Piping Components,
various Process Equipment such as Coolers, Coils, Components of Process Equipment
and Special parts.
2006-07
Jhagadia Copper Limited,
GIDC Jhagadia, Bharuch as
Project Engineer Trainee
2009-10
JVS Engineers, GIDC,
Vadodara as Design
Engineer
2011 till date
Ramsis Engineering,
W.L.L. Bahrain as
Welding Engineer
2007-09
Babaria Institute of
Technology Varnama,
Vadodara as Lecturer -
Mechanical Engineering
Department
2010-11
The Anup Engineering
Ltd., Ahmedabad as
Welding Engineer
+97336207714 bamania.me@gmail.com/ amit.kumar@ramsis.com.bh

2. • Soft Skills
Notable Accomplishments Across The Tenure
• Credit of accompanying:
o ASME certification renewal audit (Surveillance Audit, Pre Joint Review & Joint Review) for U, U2, A, PP, S, R & NB
Stamps in 2015 and 2012 at Ramsis Engineering (single handed welding and NDT)
o ISO 9001-2015 audits in 2016, ISO9001-2008 renewal audit in 2013, ISO/TS29001 audit in 2012 at Ramsis
Engineering
o ISO 14001:2004 & OHSAS: 18001:2007 surveillance audits in 2014 at Ramsis Engineering
o NBBI VR certification audits in 2013 at Ramsis Engineering
Work Experience
Achievements
Aug’11 till date: Ramsis Engineering, W.L.L. Bahrain as Welding Engineer
Role:
• Administering a team of 10 members of QC professionals at Ramsis Shop and
sites and trained them to increase the efficiency
• Attending the project construction and QC weekly meeting with client and owner
• Pivotal in qualifying new PQR, WPS and Welder in accordance with International
standards and client specifications
• Preparing and reviewing:
o WPS, PQR, WPQ, Mock-up (Tube to tube sheet)
o Weld NDT summary, Weld and Test plan
o Weld repair percentage status for welder wise and total project according to
different service classes and construction material approval status
• Performing material receiving inspection and reviewing certificates of Plats,
Pipes, Fittings, electrodes and other industrial materials
• Contributing in reviewing the radiography films and supervising welding
processes on the shop floor
• Calculating welding consumables required for jobs and maintaining stock of
welding consumables, raise the Indent as per requirement of consumables
• Preparing internal audit plans and conducting internal audit as per Ramsis QMS
as well as internal audit reports
• Raised NCRs for relevant discrepancy and take follow-up for NCR closing
• Reviewing Inspection and test Plans(ITP),
• Providing support to develop NDT procedures, Project quality plan, Hydro test
procedure, Heat Treatment procedure, Panting procedure, Pickling and
passivation,
• Guiding to prepare samples for mechanical and chemical analysis testing.
• Witnessed testing of samples at testing laboratories such as Tensile, Bend, Impact,
chemical analysis, Hardness, IGC (inter granular corrosion) testing.
• Conducting Kick of meeting (KOM), Pre Inspection meeting(PIM) with clients and
TPI.
• Dealing with clients, TPI and AI (ASME authorised Inspector)
Apr’10 – Aug’11: The Anup Engineering Ltd., Ahmedabad as Welding Engineer
Role:
Change Agent
Collaborator
Communicator
Motivator
Planner
ASME
certification
renewal audit
ISO 9001-
2015 audits
ISO 14001:2004
& OHSAS:
18001:2007
surveillance
audits
ISO9001-2008
renewal audit

3. • Managed the qualifying procedure for CS, SS, Duplex, Low alloy steel and I.S.
materials as per code and clients requirements
• Qualified PQR for different materials, thickness ranging from 1.5 mm to 200mm.
• Skilled at welding processes like SMAW, GTAW, SAW, FCAW, MIG and ESW
• Prepared Welding Procedure Specification (WPS) for different welding variables
as per ASME Sec. IX along with Welder performance qualification
specification(WPQs) as per ASME Sec.IX
• Significantly conducted qualification test for new Welders and old welders for
change in essential variables
• Prepared qualifying mock-up procedure for tube-to-tube sheet joints in Heat
exchanger
• Formulated weld test plan and weld map as per job’s drawings and clients
specifications
• Supervised and performed inspection on welding processes on the shop floor
• Calculated welding consumables required for jobs and maintaining stock of
welding consumables, raise the Indent as per requirement of consumables
• Maintained records of welding defects and controlled welding defects by welding
defect analysis
• Dealt with the third party Inspector of TUV, LRA, AGS, BV, IBR, EIL and CEIL
Previous Experience
Feb’09 – Apr’10: JVS Engineers, GIDC, Vadodara as Design Engineer
Jan’07 – Feb’09: Babaria Institute of Technology Varnama, Vadodara as Lecturer
- Mechanical Engineering Department
Dissertion
Jul’06 – Jan’07: Jhagadia Copper Limited, GIDC Jhagadia, Bharuch as Project
Engineer Trainee
Certifications
• ASNT Level II in LPT & MPT
• Bureau Veritas IRCA Internal QMS Auditor Training Course
• Internal Auditor Certified for ISO 9001/2008, ISO 14001-2004 and OSHAS 18001-
2007
• Lead Auditor Certified for ISO 9001
Education
• Masters in Materials Technology (Metallurgy) from The Maharaja Sayajirao,
University, Vadodara 2007
• B.E / B.Tech. (Mechanical Engineering) from L.E. College, Morbi, Saurastra
University 2005
IT Skills
• MS-Office, AutoCAD and Internet Applications
Date of Birth: 11th
February 1981
Nationality: Indian
Address: Current – East Riffa-905 Bahrain. Permanent – Dahod-389151, Gujarat, India.
Driving License Details: Valid Driving License of Kingdom of Bahrain
Passport Details: No. J6168031(Dt. of expiry 05.05.2021)
Visa Details: Working Visa of Bahrain
Marital Status: Married
No. of Dependents: 03
Languages Known: English, Hindi, and Gujarati