D. Selvam has over 12 years of experience in quality control and assurance roles. He holds a Diploma in Mechanical Engineering and certifications in welding inspection. Selvam has worked as a welding inspector and quality control inspector for companies in Saudi Arabia and India, overseeing welding operations and ensuring work meets standards. He is proficient in welding codes and uses computer software like MS Office. Selvam seeks a challenging position utilizing his expertise in quality assurance.

1. CURRICULUM VITAE
D.SELVAM (+12 years Experience)
CAREER OBJECTIVES
To continue as a versatile personnel in the field of Quality Control & Quality Assurance in a well
reputed and developed organization where challenging and demanding task can be administered with
total ease, expertise and efficiency gained out of personal experience
ACADEMIC QUALIFICATION:
 Diploma in mechanical engineering at Govt polytechnic college, Krishnagiri.
TECHNICAL BACKGROUND & CERTIFICATIONS:
 CSWIP3.1 (Certificate Number: 66983)
 MT, PT, RT & UT, RTFI – ASNT Level – II.
KNOWLEDGE OF FOLLOWING CODES:
1. ASME Section IX
2. AWS D1.1
3. API 650
COMPUTER SKILL:
1. MS Office 2013 Computer Skills
WORK EXPERIENCES
1. Company : M/S.HIDADA CONTRACTING LTD,SAUDI.
Position : QC-WELDING INSPECTOR
Duration : Aug 2013 to Oct 2015
2. Company : M/S.QUEST,BANGALORE,INDIA .
Position : QC-SENIOR INSPECTOR
Duration : Mar 2005 to Dec 2012
3. Company : M/S.BHEL,RANIPET,INDIA
Position : QC- INSPECTOR(APPRENTICE)
Duration : Mar 2004 to Feb 2005
4.Company : M/S.S.M.TOOLS,RANIPET,INDIA.
Position : QC- INSPECTOR
Duration : Jun 2003 to Feb 2004

2. ORGANIZATION: M/S HIDADA CONTRACTING LTD, SAUDI.
Designation: QC-WELDING INSPECTOR
Responsibilities:
 Monitor welder’s performance and welding activities to ensure that work is carried out in accordance
with approved welding procedures and standards.
 Monitor welding activities such as(pre-welding, in-process inspection & post welding activities)
 Check and record welding parameters and verify compliance with approved WPS.
 Carry out Post-Welding Visual inspections to ensure that finished welds are free of defects and
discontinuities.
 Receiving Inspection carry out incoming welding consumables .
 Inspection of floating roof, dome roof and cone roof tanks.
 Inspection of orientation of shell and roof nozzles.
 Visual Inspection of tank shell and nozzles fit up and welds.
 Coordinate with Client Inspector and Radiographic Crews and Technicians for the selection and
Radiographic Testing of RT Spots.
 Monitor the repair of welds in accordance with company procedures and client requirements.
 Monitor and ensure proper storage and handling of welding electrodes.
 Conducts tool box meetings with welders, welder foremen, and supervisors as necessary to enhance
quality welding and minimize welding defects.
 Coordinate with clients project inspection unit for various project inspection activities and issues
RFI(Request For Inspection) for witness/hold points etc.
 Organize and conduct welder’s qualification test as per ASME Section IX and client specifications.
 Issue non-conformity reports against non-complying conditions.
 Documentation maintenance for ISO records
Major projects involved in Saudi Arabia:
Storage Tanks Projects:
• Riyadh Power Plant12 Combined Cycle Project,Riyadh,Saudi Arabia: Bemco-GS JV/SEC. Procurement,
Design, Fabrication & Site Construction of 16 No’s Storage Tanks
• Rabigh Phase II Petrochemical Project, Saudi Aramco/ Sumitomo/ Petrofac Project, Procurement, design,
fabrication, and erection of 10 No’s Stainless Steel Storage Tanks.(SA240 TP304L,TP316L)

3. ORGANIZATION: M/S QUALITY EVALUATION & SYSTEM TEAM
PVT.LTD-BANGALORE, INDIA.
Designation: QA/QC SENIOR INSPECTOR
Responsibilities:
 Review of ITP, Drawings, WPS, PQR & WQT and RT Films, welding parameters.
 Incoming material inspections, MTC/MTR review and ensure correct materials are utilized in project.
 In-Process inspection such as material identification, fit up, welding, dimensional checks and pressure
Test.
 Online inspection of all preparatory items at regular intervals to avoid rework & rejections.
 Prepared WPS, conducting PQR & welder qualification at both in house and at vendor premises.
 Prepared QAP, QCP & Rework procedures.
 Before welding, during welding and after welding doing the final visual inspection and offering for NDT
as required
 Dimensional inspection, performance testing and final inspection of fabricates welded assemblies,
 Designing & inspection of welding fixtures for fabrication & inspection of components.
 Witnessing surface preparation, sand blasting of piping and pipelines.
 Painting/Coating inspection of DFT check and recording the results.
 Working experience in profile projector, Rockwell hardness testing machines etc
 Handling of all types of measuring instruments & calibration monitoring & documentation
 Issuing NCR on contractors in case of deviation from project specification and implementing corrective
action to close NCR
 Yearly process rework, rejections analysis & documentation communicating with top management then
root cause analysis, corrective & preventive action implementation.
 Attending daily review meeting for process rework & rejections.
 Preparation & issuance inspection reports.
Major projects involved in India:
• NTPC-THERMAL POWER PLANT VIDHYACHAL 2x500 MW
• NTPC- THERMAL POWER PLANT SIPAT 3x660 MW
• KOBRA WEST- THERMAL POWER PLANT 1x500 MW

4. • FLSmidth / FFE Minerals – Cement Industries Machineries Fabrication
ORGANIZATION: M/S BHEL, RANIPET, INDIA.
Designation: QC INSPECTIOR TRAINEE (APPRENTICE)
Activities:
 Inspection engineer – Fabrication &Surface preparation unit.
 In process inspection like raw material preparation, bending, marking, drilling etc.
 Inspection of Boiler supporting structures such as columns, beams, boxes, bracings, Ducts, hoppers,
air pre heater etc as per BHEL specifications
 Review of QAP, Drawings, WPS
 Instruments Handled like Micro meter, Bore dial, Vernier Height gauge, Vernier caliper, Coat meter.
ORGANIZATION: M/S S.M.TOOLS, RANIPET, TAMIL NADU, INDIA.
Designation: QC INSPECTIOR
Duration : JUN-2003 TO FEB-2004
Responsibilities:
 Production planning and control activities, Manpower management, scheduling and co-ordination of
inspection activities with client’s inspection team
 Carried out Pre-welding, In-process and post-welding inspection
 Monitoring welding equipments validation.
 Monitoring welding consumables storage, handling, conditioning and issuance.
 Establish welding procedure specification (WPS).
 Organize &Witness welder qualification tests.
 Reviewing welding operator’s qualification reports.
 Review mill test certificates for materials and consumables.
 Final inspection /Test report preparation and co-ordination with client Representatives from BHEL, TPL,
NTPC, Reliance and Third party inspection agencies.

5. PERSONAL STRENGTHS
• Enthusiastic, Energetic, People-Centric and Team Player
• Diligent to accomplish Tasks, Positive attitude towards commitment
PERSONAL PROFILEPERSONAL PROFILE::
Father’s Name : Mr.R.Devaraj
Date of Birth : 01-01-1983
Gender : Male
Nationality : Indian
Marital status : Single
Languages Known : Tamil, English
Driving License No : F/TN/23Z/006288/2006 –MCWG
Birth Place : Gudiyatham, Tamil nadu
Contacts Information :
Phone # : 00919790086687
Email Address : selvam.guna@yahoo.com
selvamd83@gmail.com
Skype ID : selvamd83
Address : S/o.R.Devaraj
25/11A, Kasthuribai Street,
Gudiyatham,
Vellore-Dist
Tamil nadu-632602
India.
PASSPORT DETAILS
Passport Number : J6629658
Passport Expiry : 03-07-2021
DECLARATION:
Here by, I declare that all of the statements furnished here are true and correct to the best of my
Knowledge & Belief.
PLACE :
DATE :

6. Yours Truly
(D.SELVAM)

7. Yours Truly
(D.SELVAM)