This CV summarizes Ananda Ram Prasath's experience and qualifications for the role of QA/QC Inspector. He has over 10 years of experience in inspection roles for major fabrication projects in oil, gas and petrochemical industries. His responsibilities have included material inspection, witnessing of tests and inspections, reviewing documentation, and ensuring quality standards are met. He holds relevant certifications in welding inspection and non-destructive testing.
Varied of 10 Years of Experience with various Projects in the field of Oil & Gas, Petrochemicals Refinery in Mechanical Construction(on-plot & off-plot), High sour facility construction, Fabrication, Erection, In-Service Inspection & shutdown Inspection carried out inspection of high pressure Piping, Pipeline laying , valves, Pressure Vessel, Storage Tanks, Heat Exchanger, Boiler, Column, Heater & structural as a QA/QC Engineer, QA/QC Multi discipline Inspector, Mechanical Inspector, Sr. Inspection Engineer, piping/pipeline Inspector, Welding Inspector, Plant Inspector & Field Inspector(vendor inspection).
Varied of 10 Years of Experience with various Projects in the field of Oil & Gas, Petrochemicals Refinery in Mechanical Construction(on-plot & off-plot), High sour facility construction, Fabrication, Erection, In-Service Inspection & shutdown Inspection carried out inspection of high pressure Piping, Pipeline laying , valves, Pressure Vessel, Storage Tanks, Heat Exchanger, Boiler, Column, Heater & structural as a QA/QC Engineer, QA/QC Multi discipline Inspector, Mechanical Inspector, Sr. Inspection Engineer, piping/pipeline Inspector, Welding Inspector, Plant Inspector & Field Inspector(vendor inspection).
Quality Control & Quality Assurance of MS pipelineIEI GSC
This presentation re. QC & QA of M S pipelines was made at Gujarat State Centre of the Institution of Engineers (India) at Ahmedabad by Er. Manoj Raghavan of SGS (India) Ltd.
Quality Control & Quality Assurance of MS pipelineIEI GSC
This presentation re. QC & QA of M S pipelines was made at Gujarat State Centre of the Institution of Engineers (India) at Ahmedabad by Er. Manoj Raghavan of SGS (India) Ltd.
I have over 11 years of work experience as QA/QC Inspector in Oil and Gas fields both offshore and onshore Construction and installations. focus on PQT/PQR, WQT, NDT, Destructive testing, Inspections of welding and Filed joint coating of Subsea Pipelines, Risers, Tie‐in spools, lateral joints, Jackets, Topside, and Pile pipes. Installation inspection of Pile driving, SPM, PLEMs, I&J tubes, Jackets & top sides.
Well intervention extends the life of producing wells by improving performance access to stranded or additional hydrocarbon reserves. Being challenged by the current oil price crisis, it is crucial to polish your intervention skills to avoid further asset loss and improve sustainability.
Sr. QA/QC Mechanical Engineer with 8 years experience in power plant, oil and gas.
Industrial Project QA/QC Mechanical Head professional with 8 years of experience from the well-recognized organizations in the field of Industrial Inspection, Quality assurance, Quality control, Welding inspection and conformity Assessment of products and services.
Expertise in conducting receiving, in process and final inspection for achieving enhanced Quality. Having good working experience as a Third party inspector for SGS industrial services.
Distinctively been a Internal auditor for ISO 9001:2008 Quality management systems. Self-directed, team-oriented, enthusiastic & possessing solid organizational skills.
1. CURRICULAM VITAE
QA/QC INSPECTOR
ANANDA RAM PRASATH.V
Mobile: +91 -9943544917
Email:ramqaqcinspector@gmail.com
OBJECTIVE
To work hard for the company’s growth and achieve a challenging position.
PROFILE
• ONSHORE – Fabrication Work shop for Pressure Vessels , Heat Exchangers , Tanks etc,
Shut Down Inspection Works , Testing Lab. Working experience of pressure vessels,
storage tanks, etc., for major oil/gas, petrochemical, fertilizer and power sector
companies.
OFFSHORE- Worked for Certification ,Inspection , Installation , Maintenance, Flare Platform
Island Refineries, shutdown , Bridges as well as Sub Sea Pipe line Laying and AUTO UT
Inspection on Pipe Lay Barge & Hook Up.
• Experienced in qualification of welding procedures, welder’s qualification, preparation of
procedure and qualification records, witnessing mechanical testing, material inspection,
welding inspection during fabrication, QA/QC activities, dimensional inspection, post
weld heat treatment, hardness testing, pneumatic testing etc. pertaining to international
codes such as ASME, AWS, API, BS etc. experienced in inspection of static equipment
in process plants such as pressure vessels, heat exchangers, storage tanks, process piping
etc, surveillance, weekly & monthly reports, onsite documentation, client liaison. Review
final documentation M.R.B (Manufacturer Record Book) of the project.
EDUCATIONAL & TECHNICAL QUALIFICATIONS
April 2008 Completed diploma in automobile engineering (DAE)from kongu polytechnic
College, Erode
Certifications:
• CSWIP 3.1 [certificate no-99376](Data of Expiry-11-june-2020)
• IRATA ROPE ACCESS LEVEL-1
2. • PCN LEVEL-IIRFI[PCN NO-321202]
• ASNT Level– II in RT, UT, MT, PT,RTFI
• I.T SKILLS: MS Office, Auto CAD, PRO/E & Internet Applications.
PROFESSIONAL EXPERIENCE
1.March 8th to May 2 -QCON( ADGAS LNG TRAIN2 AND BOILER 3&4 SHUT
DOWN PROJECT) DAS ISLANDAbu-Dhabi
POSITION-QA/QC INSPECTOR
Responsibilities:
• Carrying out the inspection for the incoming materials and review of MTC as per the
project recruitments.
• Conducting the following:
• Review of the drawings and assessing the dimensions in fabrications.
• Fit-up inspection of fabricated spools involving all aspects such as orientation, material
identity, Traceability, dimensional accuracy and ensuring use of latest revision of
approved drawings.
• Witnessing of welder qualifications testing, procedures qualification testing and
mechanical test.
• Witnessing welding visual inspection, repair, preheat, PWHT & Hardness Testing.
• Witnessing MPI, PT of welded Joints.
• Coordination with the field subcontractors and the Third Party NDT Inspection Company
• Monitoring the welding repair rate & carrying out the repair analysis to bringing down
the repair rate.
• Reviewing final documents required for Test packs, pipe work punch listing and pressure
testing.
• Conducting the Internal Audits and follow-up for corrective actions.
PROFESSIONAL EXPERIENCE
2.JAN 30th to March 4th 2016 -QCON( ADGAS OAG SHUT DOWN PROJECT) DAS
ISLAND Abu-Dhabi
POSITION-QA/QC INSPECTOR
Responsibilities:
• Stage-wise & final inspection of Pressure Vessels, Heat Exchangers, valves, pipes & pipe
fittings, forgings and castings at vendors shop-floor / construction sites.
3. • Material inspection in compliance with purchase order, Review & verification of Material
test certificates (MTC) for various materials.
• Review and approval vendor QA/QC Plans, procedures and ITP.
• Witness for NDT, DT, Hydrostatic/pneumatic tests and having the required inspection
performed during such tests.
• Performing visual and dimensional inspections to ensure that following are within
tolerances specified in drawings & client specifications.
• Monitor all inspection activities regarding equipments installations, starting from the
warehouse inspection, each stage of erection and up to final documents hand-over.
• Documentation of all inspected/witness activities, final stamping & issue of inspection
release note upon
• Acceptance of the equipment
3. July 1st to Aug 10th 2015 - Daeoo[project-sadara]saudi arabia
Position - WELDING INSPECTOR
Responsibilities:
• Checking drawings, WPS, and type of electrodes.
• Conducts and evaluates welder qualification test.
• Coordinates with welding supervisor on all welding activities& Prepared welding
schedules
• Prepared and submit daily welding progress and evaluated within Scheduled.
• Conducts inspection on finished weld joints and prepare visual inspection Reports.
• Monitors baking and keeping of electrodes at distribution centre. Prepared traceability
records data or weld history.
• NDT Activities & Co-ordination with client. Radiography film Interpretation and
evaluation as per ASME Sec V, ASME & ANSI B31.1, 31.3.
• Carry out and evaluate weld metal discontinuities by PT, MT&UT. Co-ordination of
various NDT activities at shop at site.
• Post welds Heat-Treatment co-ordination and chart reviewing as per codes and Inspection
Testing Procedure.
• Hardness & PMI Inspection. Report preparation through computer.
• Materials handled: Low temperature carbon steel (A333 Gr.6, A671 Gr.cc 60), Carbon
steel (API 5LGRx60), Nickel Alloy steel (B444 N06625,B423 N08825), Stainless steel
(A312 TP316L,A312 S32154).
• Attending RT repairs.
• Witnessing Hydro test, Pneumatic test, Tie in points, PWHT & Hardness test.
• Visual inspection of pigging and testing equipment
• Preview and endorse instrument calibration certificates
4. • Preparation of QA/QC documents, Line history sheet, Test pack and final submission to
client.
• Receive final clearance fromclient&submitdossierfile.
4.Mar 7th to 15th Apr 2015 - FLOUR [project-sipchem jac shut down project] saudi
POSITION-QA/QC INSPECTOR
Responsibilities:
• Stage-wise & final inspection of Pressure Vessels, Heat Exchangers, storage tanks,
valves, pipes & pipe fittings, forgings and castings at vendors shop-floor / construction
sites.
• Material inspection in compliance with purchase order, Review & verification of Material
test certificates (MTC) for various materials.
• Review and approval vendor QA/QC Plans, procedures and ITP.
• Witness for NDT, DT, Hydrostatic/pneumatic tests and having the required inspection
performed during such tests.
• Performing visual and dimensional inspections to ensure that following are within
tolerances specified in drawings & client specifications.
• Monitor all inspection activities regarding equipments installations, starting from the
warehouse inspection, each stage of erection and up to final documents hand-over.
• Documentation of all inspected/witness activities, final stamping & issue of inspection
release note upon
• Acceptance of the equipment
5.Now 5th to dec 15th 2014-CHEMANOL methanol chemicals company shut down project]
saudi
POSITION-QA/QC INSPECTOR
Responsibilities:
• Carrying out the inspection of the incoming materials as per the project recruitments.
• Witnessing of Welder Qualification Test and Procedure Qualification Test
• Review of WPS & PQR for carbon steel, stainless steel & Allow steel.
• Witnessing of fit-up & welding visual inspection
• Witnessing Dimensional check
• Witnessing of all NDT activity including review radiographic film
• Test packs review, witnessing hardness test and Leak Test.
6.Aug 10th to sep 15th 2014 -SAMSUNG ENGINEERING (IBN ZAHR OLEFINS
CONVERSION)
5. TECHNOLOGY (OCT) shut down project] saudi arabia
POSITION-QC INSPECTOR PIPING
Responsibilities:
• Carrying out the inspection for the incoming materials and review of MTC as per the
project recruitments.
• Conducting the following:
• Review of the drawings and assessing the dimensions in fabrications.
• Fit-up inspection of fabricated spools involving all aspects such as orientation, material
identity, Traceability, dimensional accuracy and ensuring use of latest revision of
approved drawings.
• Witnessing of welder qualifications testing, procedures qualification testing and
mechanical test.
• Witnessing welding visual inspection, repair, preheat, PWHT & Hardness Testing.
• Witnessing MPI, PT of welded Joints.
• Coordination with the field subcontractors and the Third Party NDT Inspection Company
• Monitoring the welding repair rate & carrying out the repair analysis to bringing down
the repair rate.
• Reviewing final documents required for Test packs, pipe work punch listing and pressure
testing.
• Conducting the Internal Audits and follow-up for corrective actions.
• Review of the radiographic film and all NDT reports on a daily basis
• Checking the hydrostatic test packages for NDT compliance prior to testing
• Monitor the control and issue of welding electrodes
• Controlled Sub-con welding inspectors at site
• Actively monitor site radiation safety
• Reinstatement inspection of system / packages.
• Coordinate the issue of nonconformance reports through the site QC manager
• Compete site quality instructions to sub contractors when required
7.May 2nd to june 16th 2014 - Sabic shut down project saudi arabia
POSITION-QC INSPECTOR PIPING
Responsibilities:
• Carrying out the inspection for the incoming materials and review of MTC as per the
project recruitments.
• Conducting the following:
6. • Review of the drawings and assessing the dimensions in fabrications.
• Fit-up inspection of fabricated spools involving all aspects such as orientation, material
identity, Traceability, dimensional accuracy and ensuring use of latest revision of
approved drawings.
• Witnessing of welder qualifications testing, procedures qualification testing and
mechanical test.
• Witnessing welding visual inspection, repair, preheat, PWHT & Hardness Testing.
• Witnessing MPI, PT of welded Joints.
• Coordination with the field subcontractors and the Third Party NDT Inspection Company
• Monitoring the welding repair rate & carrying out the repair analysis to bringing down
the repair rate.
• Reviewing final documents required for Test packs, pipe work punch listing and pressure
testing.
• Conducting the Internal Audits and follow-up for corrective actions.
8.June 2011 to Nov 2014 - ASCENT NDTServices (LNG project) Cochin India
POSITION- NDT coordinator& Film Interpretation
Responsibilities:
•
• Carry out radiographyorvarioussize piping(ø1/2”to 20”) of on streamand off streampiping.
• Coordinating with third party NDT companies for Newly welded &repair welding are
covered in radiography using various technologies.
• Experience gathered by taken the radiography of socket welds & small bore fitting in
elliptical & super impose techniques.
• Carried out RT, UT, MT, PT, for all boiler components, UT scanning for all pipelines,
vessels and columns etc, Ultrasonic lamination check for piping. Prepare the isometric
drawings of piping modification works. Carried out visual inspection.
• Familiar in single wall – single image, Double well – single image, Double wall – Double
image, Elliptical, panoramic & super impose. (Die range form – 1 inch to 56 inch)
• Radiographic Film processing and film interpretation.
• Preparation and submission of reports & coordination with clients.
9.April 2008 to April 2011 -C.PREMIER NDTservices, (BHEL PROJECTS)Trichy india
POSITION- NDT coordinator& Film Interpretation,
Responsibilities:
7. • CarriedoutRT, UT, MT, PT,for all boilercomponents,UTscanningforall pipelines,vesselsand
columnsetc,Ultrasoniclaminationcheckforpiping.Preparethe isometricdrawingsof piping
modificationworks.Carriedoutvisual inspection.
• Radiographic Film processing and film interpretation.
• Preparation and submission of reports & coordination with clients.
Date of Birth: 15TH APRIL1989
Passport Number: j8824263
Nationality: Indian
Languages Known: English, Tamil
References:Available on request
[ANANDA RAM PRASATH.V]