CBS provides a solution to problems in home construction by using composite building materials and panelization. Their process replaces traditional materials with disaster-resistant composites and assembles buildings like automobiles in a factory setting. This allows high-speed production of housing units at lower costs while reducing environmental impacts and solving deficits in affordable housing worldwide.
Building your own home means different things to each and every one of us. Identifying a few key factors is a good place to start when considering a building system choice.
First Commercial CLT Project in the USADarryl Byle
This case study describes the first commercial building project in the US to use cross-laminated timber (CLT) for its structure. The building is located in Whitefish, Montana and replaces an old Quonset hut. Key advantages of using CLT included its structural properties, acoustic performance, fire resistance, environmental benefits, speed of construction, and ability to regulate interior moisture and temperature. The project required approval from the local building official, which was obtained by demonstrating CLT met or exceeded code requirements for quality, strength, fire resistance, and safety. CLT construction proceeded rapidly through prefabrication of panels off-site and raising of the structure.
The document discusses design considerations for cross-laminated timber (CLT) buildings. It covers optimal CLT designs and applications, material properties, design resources, suitable projects, finishes, floor, wall and lateral designs. It also addresses vibration, fire, acoustic performance, connections, termite control, variations between manufacturers, design software, balancing strength with other factors, importation, and the CLT design and construction process when working with a supplier like SmartStruct.
This document summarizes a passive house built in Brittany, France for a retired farming couple using local materials. The 120 sqm house was built from 2014 using wood from their property for the frame and insulated with recycled newspapers. It has no conventional heating system, relying instead on passive solar gain and occupants. The build utilized local tradesmen and faced some challenges around regulations and sourcing specialized passive components, but was completed for under £1,000 per square meter.
The document summarizes the ambitious project of Kevin McCabe to build Dingle Dell, which is being called Europe's most significant cob building. McCabe aims to build a 10,000 square foot family home using low-impact materials like cob to achieve high energy efficiency standards. The multi-year project has faced challenges from weather delays and funding issues, but McCabe's expertise and innovative use of materials like cob pillars is pushing design boundaries to create a showcase for sustainable architecture.
A new building technology for one and two floors houses of various configurations. Energy efficient, rapid to build, inexpensive. Suitable for any kind of sustainable projects worldwide, including social and community housing schemes, residential estates, reacreation and holiday projects.
CBS provides a solution to problems in home construction by using composite building materials and panelization. Their process replaces traditional materials with disaster-resistant composites and assembles buildings like automobiles in a factory setting. This allows high-speed production of housing units at lower costs while reducing environmental impacts and solving deficits in affordable housing worldwide.
Building your own home means different things to each and every one of us. Identifying a few key factors is a good place to start when considering a building system choice.
First Commercial CLT Project in the USADarryl Byle
This case study describes the first commercial building project in the US to use cross-laminated timber (CLT) for its structure. The building is located in Whitefish, Montana and replaces an old Quonset hut. Key advantages of using CLT included its structural properties, acoustic performance, fire resistance, environmental benefits, speed of construction, and ability to regulate interior moisture and temperature. The project required approval from the local building official, which was obtained by demonstrating CLT met or exceeded code requirements for quality, strength, fire resistance, and safety. CLT construction proceeded rapidly through prefabrication of panels off-site and raising of the structure.
The document discusses design considerations for cross-laminated timber (CLT) buildings. It covers optimal CLT designs and applications, material properties, design resources, suitable projects, finishes, floor, wall and lateral designs. It also addresses vibration, fire, acoustic performance, connections, termite control, variations between manufacturers, design software, balancing strength with other factors, importation, and the CLT design and construction process when working with a supplier like SmartStruct.
This document summarizes a passive house built in Brittany, France for a retired farming couple using local materials. The 120 sqm house was built from 2014 using wood from their property for the frame and insulated with recycled newspapers. It has no conventional heating system, relying instead on passive solar gain and occupants. The build utilized local tradesmen and faced some challenges around regulations and sourcing specialized passive components, but was completed for under £1,000 per square meter.
The document summarizes the ambitious project of Kevin McCabe to build Dingle Dell, which is being called Europe's most significant cob building. McCabe aims to build a 10,000 square foot family home using low-impact materials like cob to achieve high energy efficiency standards. The multi-year project has faced challenges from weather delays and funding issues, but McCabe's expertise and innovative use of materials like cob pillars is pushing design boundaries to create a showcase for sustainable architecture.
A new building technology for one and two floors houses of various configurations. Energy efficient, rapid to build, inexpensive. Suitable for any kind of sustainable projects worldwide, including social and community housing schemes, residential estates, reacreation and holiday projects.
The study by the University of Michigan examined the impact of masonry ordinances in four suburban Chicago communities from 1990 to present. It found that communities with masonry ordinances (Orland Park and Tinley Park) had higher property values, larger tax bases, continued population growth, and similar housing affordability compared to those without such ordinances (Hoffman Estates and Streamwood). The adoption of masonry ordinances appeared to enhance community sustainability through increased property values, tax revenue, and quality of growth over time.
The document provides an overview of several architectural projects that feature Ibstock bricks. It includes summaries of Elmfield Court, a residential development in London by CF Moller featuring Ibstock Bradgate Light Buff bricks; the Courtyard House in London by Dallas Pierce Quintero featuring vertically laid Ibstock Staffordshire Slate Blue bricks; and the Foundry, an industrial development in Salford by Sixtwo Architects featuring brick facades. It also mentions Ibstock brick successes at the 40th Brick Awards and profiles new shades of grey bricks introduced by Ibstock.
Greenbuild EXPO 2012 presentation by EcoVert Solutionsecovertsol
The document discusses the challenges of achieving zero carbon emissions in historic urban areas with conservation restrictions. It notes that 9.3 million homes in the UK are hard to treat energetically, with many located in conservation areas. Retrofitting heritage buildings to improve energy efficiency is complicated by the need to preserve architectural heritage. Various strategies are proposed to significantly improve energy performance while respecting conservation priorities, such as using sustainable materials, improving air tightness and installing secondary glazing. More research is still needed to better understand how older buildings actually perform and find solutions that reduce costs while meeting conservation and sustainability goals.
When Ochapowace's 1980s-era hockey arena burned down, the community mourned the loss of the old arena. But, the fire created the opportunity to replace the outdated facility with one providing extraordinary amenities for the community -- Wright Construction Western, Inc., a Butler Builder®, built the new 56,700-square-foot Chief Denton George Memorial Multiplex.
A home in North Minneapolis was damaged by a 2012 tornado. The home underwent repairs that included removing asbestos siding, adding foam insulation, and installing new exterior materials like Hardy Lap siding and wood shakes to provide energy efficiency and restore the home's classic look.
This document provides biographical information on James P. Antonic, the President and CEO of Composite Building Structures. It details his educational background and over 50 years of experience in international business development, setting up foreign market penetration strategies and operations for over 50 American companies. It outlines his roles establishing manufacturing plants, joint ventures, distribution networks and sales organizations in over 40 countries. The document also lists his publications, patents, appointments, education and memberships.
This document provides information about butterflies and moths. It discusses how butterflies are beneficial to ecosystems and different from moths. Key differences include antenna shape, whether they are diurnal or nocturnal, body shape, and how they rest. The document also covers butterfly classification, life cycle, morphology, mimicry, habitats, sexual dimorphism, migration, identification keys, common species in Bangalore, and tips for creating a butterfly park.
This document presents a proposal from Composite Building Structures (CBS) to address housing deficits in Africa using an assembly-line construction method. CBS argues that housing deficits contribute to systemic poverty and inhibit meeting growth rates with current methods. CBS proposes establishing Construction Technology Centers that would use composite materials and high-production assembly lines to build affordable, durable housing and commercial buildings. The centers would train local workers and develop self-sustaining communities providing housing, jobs, clinics, schools, and sustainable food and energy production. CBS seeks partnerships with countries to conduct feasibility studies, provide training and supervision, and monitor quality and efficiency to fulfill housing and development needs sustainably and profitably.
The document provides information about the course module on business marketing. It outlines the main texts to be studied, the assessment plan which includes a case analysis, project, and end term assessment. It describes the project requirements which involve analyzing business selling by different types of companies and trade shows. It lists the sub-topics to be covered in the project report such as company background, objectives, marketing challenges, and future scenario. It also provides characteristics of business marketing such as derived demand, close buyer relationships, and multiple buying influences. Finally, it asks whether Google is more focused on B2B or B2C and lists top performing B2B CEOs.
The document discusses the classification of animals into chordates and non-chordates based on the presence or absence of a notochord. It notes that some animals like Balanoglossus have a notochord that is not present throughout their lifecycle, so they are classified separately as Protochordata. It then describes the two sub-phyla of Protochordata: Urochordata, characterized by tadpole larvae that undergo retrogressive metamorphosis, and Cephalochordata, where the notochord persists throughout life.
Falkon provides social media monitoring and inbound marketing solutions to help companies listen to conversations on social media, measure engagement, and effectively engage customers. It monitors hundreds of millions of social media posts daily across various platforms and metrics to help companies understand brand sentiment, monitor competitors, improve marketing strategies and increase sales. Falkon's services include social media monitoring, online strategy development, search engine optimization, and helping companies effectively engage customers through social media.
Buildings used to suffer great losses from natural disasters every day, with homes being destroyed by winds, earthquakes, floods, and fires around the world. People realized that most buildings were not resilient enough and started working to find solutions by rethinking alternative materials, different systems, and better construction methods. This led builders, developers, insurers, governments, and owners to apply better solutions that reduced costs while making people and properties safer by increasing the resiliency of homes to withstand nature's forces.
A man visited a waxworks museum and had an unsettling experience. While looking at the wax figures, one figure of a man seemed more realistic than the others and appeared to move which greatly disturbed the visitor. He quickly left the museum shaken by what he thought he saw from the seemingly lifelike wax figure.
1. The document contains several pie charts and questions related to the charts including calculating percentages, angles of sectors, differences between values, and ratios.
2. Many questions involve using information from the pie charts to find unknown values like number of students with a particular hobby or type of car sold.
3. There are a variety of math word problems across multiple topics like percentages, ratios, differences, and using chart data to find unknown values.
The document discusses the results of a study on the effects of a new drug on memory and cognitive function in older adults. The double-blind study involved 100 participants aged 65-80 who were given either the drug or a placebo daily for 6 months. Researchers found that those who received the drug performed significantly better on memory and problem-solving tests at the end of the study compared to those who received the placebo.
Digiperiaatteiden toimeenpanon palvelumuotoiluosuus tuotti yhteensä viisi alustavaa käyttäjäpersoonaa.
Persoona on käyttäjätutkimuksen tiedon perusteella luotu, fiktiivinen henkilöhahmo, jossa kiteytyy käyttäjäryhmän keskeisimmät ominaisuudet.
Persoonien avulla palvelukonseptissa ja sen kehittämisessä on helpompi varmistaa eri käyttäjäryhmien tarpeiden toteutuminen.
PEB Steel Buildings Brochure in Korean (2012)Alvis Duy
PEB Steel Buildings specializes in the Design, Fabrication and Erection of Pre-engineered steel buildings (PEBs), steel structures for factories, warehouses, showrooms, commercial/ trade centers, supermarkets, sport stadiums, exhibition halls, aircraft hangars, etc.
For downloading this brochure, please go to site http://www.pebsteel.com
PEB Steel Buildings Brochure in english, nhà thép tiền chế PEB SteelAlvis Duy
PEB Steel provides pre-engineered buildings and structural steel products. It has multiple factories across Vietnam and India with modern production technology. PEB Steel is a regional leader in Asia known for its product quality, engineering excellence, and best customer service in the industry.
PEB Steel Buildings luôn là lựa chọn số 1 trong lĩnh vực thiết kế và lắp dựng nhà thép tiền chế, khung nhà thép, nhà kho nhà xưởng, khung nhà thép của trung tâm thương mại.
Thông tin chi tiết, vui lòng đến website http://www.pebsteel.com hay http://www.pebsteel.com.vn
The study by the University of Michigan examined the impact of masonry ordinances in four suburban Chicago communities from 1990 to present. It found that communities with masonry ordinances (Orland Park and Tinley Park) had higher property values, larger tax bases, continued population growth, and similar housing affordability compared to those without such ordinances (Hoffman Estates and Streamwood). The adoption of masonry ordinances appeared to enhance community sustainability through increased property values, tax revenue, and quality of growth over time.
The document provides an overview of several architectural projects that feature Ibstock bricks. It includes summaries of Elmfield Court, a residential development in London by CF Moller featuring Ibstock Bradgate Light Buff bricks; the Courtyard House in London by Dallas Pierce Quintero featuring vertically laid Ibstock Staffordshire Slate Blue bricks; and the Foundry, an industrial development in Salford by Sixtwo Architects featuring brick facades. It also mentions Ibstock brick successes at the 40th Brick Awards and profiles new shades of grey bricks introduced by Ibstock.
Greenbuild EXPO 2012 presentation by EcoVert Solutionsecovertsol
The document discusses the challenges of achieving zero carbon emissions in historic urban areas with conservation restrictions. It notes that 9.3 million homes in the UK are hard to treat energetically, with many located in conservation areas. Retrofitting heritage buildings to improve energy efficiency is complicated by the need to preserve architectural heritage. Various strategies are proposed to significantly improve energy performance while respecting conservation priorities, such as using sustainable materials, improving air tightness and installing secondary glazing. More research is still needed to better understand how older buildings actually perform and find solutions that reduce costs while meeting conservation and sustainability goals.
When Ochapowace's 1980s-era hockey arena burned down, the community mourned the loss of the old arena. But, the fire created the opportunity to replace the outdated facility with one providing extraordinary amenities for the community -- Wright Construction Western, Inc., a Butler Builder®, built the new 56,700-square-foot Chief Denton George Memorial Multiplex.
A home in North Minneapolis was damaged by a 2012 tornado. The home underwent repairs that included removing asbestos siding, adding foam insulation, and installing new exterior materials like Hardy Lap siding and wood shakes to provide energy efficiency and restore the home's classic look.
This document provides biographical information on James P. Antonic, the President and CEO of Composite Building Structures. It details his educational background and over 50 years of experience in international business development, setting up foreign market penetration strategies and operations for over 50 American companies. It outlines his roles establishing manufacturing plants, joint ventures, distribution networks and sales organizations in over 40 countries. The document also lists his publications, patents, appointments, education and memberships.
This document provides information about butterflies and moths. It discusses how butterflies are beneficial to ecosystems and different from moths. Key differences include antenna shape, whether they are diurnal or nocturnal, body shape, and how they rest. The document also covers butterfly classification, life cycle, morphology, mimicry, habitats, sexual dimorphism, migration, identification keys, common species in Bangalore, and tips for creating a butterfly park.
This document presents a proposal from Composite Building Structures (CBS) to address housing deficits in Africa using an assembly-line construction method. CBS argues that housing deficits contribute to systemic poverty and inhibit meeting growth rates with current methods. CBS proposes establishing Construction Technology Centers that would use composite materials and high-production assembly lines to build affordable, durable housing and commercial buildings. The centers would train local workers and develop self-sustaining communities providing housing, jobs, clinics, schools, and sustainable food and energy production. CBS seeks partnerships with countries to conduct feasibility studies, provide training and supervision, and monitor quality and efficiency to fulfill housing and development needs sustainably and profitably.
The document provides information about the course module on business marketing. It outlines the main texts to be studied, the assessment plan which includes a case analysis, project, and end term assessment. It describes the project requirements which involve analyzing business selling by different types of companies and trade shows. It lists the sub-topics to be covered in the project report such as company background, objectives, marketing challenges, and future scenario. It also provides characteristics of business marketing such as derived demand, close buyer relationships, and multiple buying influences. Finally, it asks whether Google is more focused on B2B or B2C and lists top performing B2B CEOs.
The document discusses the classification of animals into chordates and non-chordates based on the presence or absence of a notochord. It notes that some animals like Balanoglossus have a notochord that is not present throughout their lifecycle, so they are classified separately as Protochordata. It then describes the two sub-phyla of Protochordata: Urochordata, characterized by tadpole larvae that undergo retrogressive metamorphosis, and Cephalochordata, where the notochord persists throughout life.
Falkon provides social media monitoring and inbound marketing solutions to help companies listen to conversations on social media, measure engagement, and effectively engage customers. It monitors hundreds of millions of social media posts daily across various platforms and metrics to help companies understand brand sentiment, monitor competitors, improve marketing strategies and increase sales. Falkon's services include social media monitoring, online strategy development, search engine optimization, and helping companies effectively engage customers through social media.
Buildings used to suffer great losses from natural disasters every day, with homes being destroyed by winds, earthquakes, floods, and fires around the world. People realized that most buildings were not resilient enough and started working to find solutions by rethinking alternative materials, different systems, and better construction methods. This led builders, developers, insurers, governments, and owners to apply better solutions that reduced costs while making people and properties safer by increasing the resiliency of homes to withstand nature's forces.
A man visited a waxworks museum and had an unsettling experience. While looking at the wax figures, one figure of a man seemed more realistic than the others and appeared to move which greatly disturbed the visitor. He quickly left the museum shaken by what he thought he saw from the seemingly lifelike wax figure.
1. The document contains several pie charts and questions related to the charts including calculating percentages, angles of sectors, differences between values, and ratios.
2. Many questions involve using information from the pie charts to find unknown values like number of students with a particular hobby or type of car sold.
3. There are a variety of math word problems across multiple topics like percentages, ratios, differences, and using chart data to find unknown values.
The document discusses the results of a study on the effects of a new drug on memory and cognitive function in older adults. The double-blind study involved 100 participants aged 65-80 who were given either the drug or a placebo daily for 6 months. Researchers found that those who received the drug performed significantly better on memory and problem-solving tests at the end of the study compared to those who received the placebo.
Digiperiaatteiden toimeenpanon palvelumuotoiluosuus tuotti yhteensä viisi alustavaa käyttäjäpersoonaa.
Persoona on käyttäjätutkimuksen tiedon perusteella luotu, fiktiivinen henkilöhahmo, jossa kiteytyy käyttäjäryhmän keskeisimmät ominaisuudet.
Persoonien avulla palvelukonseptissa ja sen kehittämisessä on helpompi varmistaa eri käyttäjäryhmien tarpeiden toteutuminen.
PEB Steel Buildings Brochure in Korean (2012)Alvis Duy
PEB Steel Buildings specializes in the Design, Fabrication and Erection of Pre-engineered steel buildings (PEBs), steel structures for factories, warehouses, showrooms, commercial/ trade centers, supermarkets, sport stadiums, exhibition halls, aircraft hangars, etc.
For downloading this brochure, please go to site http://www.pebsteel.com
PEB Steel Buildings Brochure in english, nhà thép tiền chế PEB SteelAlvis Duy
PEB Steel provides pre-engineered buildings and structural steel products. It has multiple factories across Vietnam and India with modern production technology. PEB Steel is a regional leader in Asia known for its product quality, engineering excellence, and best customer service in the industry.
PEB Steel Buildings luôn là lựa chọn số 1 trong lĩnh vực thiết kế và lắp dựng nhà thép tiền chế, khung nhà thép, nhà kho nhà xưởng, khung nhà thép của trung tâm thương mại.
Thông tin chi tiết, vui lòng đến website http://www.pebsteel.com hay http://www.pebsteel.com.vn
New-era of materials, systems, & methods exist that solve most problems in housing: Cost, Quality, Disaster-resistance, and Environmental Responsibility
Composite materials have advantages over traditional materials like wood and concrete when used in construction. Composites are a combination of materials that achieve enhanced performance. They are now used in many applications including buildings, bridges, railings and more. Composite framing systems offer benefits like strength, durability, sustainability, disaster resistance, and energy efficiency. Prefabricated wall panels can be produced using composites to provide a complete building shell that is fast to assemble.
The document discusses a company called Composite Building Structures (CBS) that aims to replace traditional building materials with composite materials. CBS's objectives are to build disaster resistant and social housing using composites that can be assembled like automobiles in a factory setting. The document summarizes that composites are a combination of materials that achieve higher characteristics than individual materials. It provides examples of composite applications and markets. It outlines CBS's plans to mass produce composite building panels through automation to make housing more affordable and competitive globally.
Western Forms provides aluminum forming systems for cast-in-place concrete construction. Their systems allow builders to construct concrete homes, apartments, and other structures quickly and affordably. Their lightweight, modular forms can be used to construct exterior walls, interior walls, floors, and other elements. Builders can reportedly construct an entire house in a single day using Western Forms systems. The systems have been used on projects in over 40 countries.
The American Brick Company provides the EZ WallTM Engineered Thin Brick Cladding System. It has been installed on various commercial, retail, and remodeling projects across the US and worldwide. The system offers advantages like design flexibility, structural flexibility, speed of installation, compatibility with other materials, positive mechanical attachment, and durability. It uses lightweight galvanized steel panels and requires less material and energy to produce than traditional brick.
This document discusses housing challenges in developing countries and proposes solutions using locally available and cost-effective materials. It focuses on bamboo as a building material and provides details on its properties, uses in construction, treatment methods to improve durability, and new technologies developed to produce bamboo-based building components. The document also describes an interlocking compressed stabilized earth block system that provides a sustainable approach to low-cost housing construction through its use of locally sourced materials, energy efficiency, structural strength, and resistance to natural hazards.
The EZ Wall™ Thin Brick Cladding System has been installed across the country and around the world on a wide range of commercial and retail projects, as well as reface and remodel projects.
Composite Building Structures develops a composite framing material as an alternative to wood and concrete for building structures. The composite material is stronger than steel, lighter than wood, and can be manufactured quickly in an automated factory process. It provides benefits such as strength in high winds and earthquakes, fire resistance, and sustainability. The document proposes that using the composite material could help address various problems and challenges facing the construction industry while earning points for green building certification standards.
This document outlines a vision for more sustainable and eco-friendly construction materials and processes. It proposes using foam concrete technology to create blocks from fly ash and other wastes that are locally available, energy efficient, and reduce environmental impacts. The blocks offer benefits like strength, insulation, moisture resistance, and economy compared to traditional clay bricks. Using these blocks helps preserve soil, forests, and resources while providing affordable sustainable construction options.
The document proposes a triage approach to addressing homelessness using rapidly assembled prefabricated shelter units made of cross-laminated timber panels. The 16ft x 16ft units are designed to provide security, comfort, sanitation and a sense of place for those experiencing homelessness in a fast, affordable, and sustainable manner using mass timber construction. The units meet building code standards and can be assembled in a fraction of the time of traditional construction through precision manufacturing and assembly of pre-cut panels.
This document describes CBS Enterprise Companies which produce composite building materials as an alternative to wood, steel, and concrete. Their CBS Egis System uses lightweight composite panels, studs, and parts that assemble quickly into structures that are stronger, more durable, and more disaster resistant than traditional materials. The system aims to provide higher quality, safer, and more energy efficient buildings that can be constructed faster and at lower costs than conventional methods.
The document discusses a new method of light gauge steel frame building that provides advantages over traditional brick and mortar construction. It is used extensively worldwide and offers benefits like quick assembly, cost efficiency, improved thermal properties, and quality schools. The document then presents configurations for potential school buildings and outlines the building process step-by-step. Key advantages are that every school is built to the same high quality, they can be built very quickly, and offer durability, strength, and energy efficiency comparable to traditional construction.
The document discusses the advantages of modular construction over conventional construction methods. It states that modular construction allows for pre-engineering and prefabrication in a controlled factory environment, providing greater value through reduced costs, improved quality control, and faster installation compared to conventional on-site construction which faces challenges from weather, theft, and coordination of workers and supplies.
The document describes Imison, a construction system that uses expanded polystyrene (EPS), light gauge steel, and a plaster called Fibrecote. Key points:
- Imison walls can be constructed in less than 3 hours and provide better insulation than brick, keeping houses 6C warmer in winter and 2C cooler in summer.
- Fibrecote plaster gives the walls higher strength than conventional plaster and reduces damp and condensation.
- Imison structures are engineered to withstand extreme loads like hurricanes and heavy snow and remain crack-free.
- The system is accredited by several international standards organizations and has been used to construct buildings from homes to hotels since 1997.
This document discusses sustainability approaches for historic buildings. It argues that existing buildings will remain dominant and need upgrading, and that historic buildings make up a small percentage but face the same challenges. While conservation designations can be seen as restrictive, opportunities exist to improve sustainability through approaches that respect a building's history and character. Examples are provided of projects that enhanced sustainability through efficient and sensitive upgrades that enhanced viability of historic structures. The document advocates considering all aspects of sustainability and adapting solutions to a building's existing operation and significance.
This document summarizes restoration materials and techniques from several companies for anchoring, strengthening, and stabilizing structures. It discusses approaches that are minimally invasive and reversible such as stress reduction through increased bearing area. Various cement and epoxy-based anchoring systems, strengthening fabrics, and concrete repair materials are described. The document emphasizes that many of these technologies have been used for 15-30 years and have a proven track record in restoring historic and other structures.
The document discusses autoclaved aerated concrete (AAC), including its history, manufacturing process, physical properties, advantages, and other applications. AAC was discovered in 1914 when the Swedish found that adding aluminum powder to a mixture of cement, lime, water, and sand caused it to expand. It is manufactured by mixing cement, lime, sand, water, and aluminum then autoclaving the mixture, which causes it to expand and solidify into lightweight, insulated blocks. AAC offers benefits like lightweight construction, thermal and sound insulation, fire resistance, and durability.
This document provides information about affordable housing solutions from Green-Energy-Products.Com. It describes a panelized steel building system that provides durable, efficient housing that can be constructed quickly. Various product options are presented, including disaster relief housing ranging from high to medium density, a small clinic building, and affordable single-family homes from 300-550 square feet. The system aims to offer cost-effective, high-quality housing alternatives that are resistant to natural disasters and require low maintenance.
Similar to Americas appropriate fit using today's tech (20)
The document describes the services offered by Composite Building Structures, Ltd. It outlines amenities and facilities that would be included in efficient and sustainable community designs. These include recreational areas, medical clinics, schools, housing, and workspaces. The company also lists types of buildings it assists with planning including hospitals, fish farms, and incarceration facilities. It provides integrated designs that combine energy solutions, consider local needs assessments, and achieve cost-effective sustainability.
This document outlines a plan for developing self-sustaining village projects to address issues like population growth, resource depletion, and lack of access to necessities. The plan involves establishing villages that can provide housing, electricity, water, food, and jobs through sustainable methods like alternative energy, efficient infrastructure, hydroponic farming, and developing skills for maintenance and commerce. The goal is to create self-sufficient communities through a step-by-step process using appropriate technologies and materials.
The document summarizes IMD Group's work assisting various companies with new market entries and business startups over several decades. IMD provides initial market research, strategy planning, operations training, and helps businesses become profitable before gradually withdrawing support. Examples discussed include helping Safety-Kleen expand into Asia, qualifying suppliers for a new Toyota factory, and developing courseware that was adopted as a job training program in Mexico. IMD works hands-on to establish businesses, joint ventures, and distributor networks before companies are self-sufficient.
James has one of the top 5% most viewed LinkedIn profiles for 2012 and LinkedIn now has 200 million members. Deep Nishar, Senior Vice President of Products and User Experience at LinkedIn, thanks James for being part of LinkedIn's community and for helping connect the world's professionals.
The document describes a composite building structure system from CBS-Homes that uses simple framing, footers, windows, doors, and jigs to construct structural skeletons and panels for safer, lower cost housing. CBS-Homes offers solutions like insulated shear walls, floor panels, post and beam construction, and panelized studs that allow for rapid assembly of superior buildings.
Any Design Panelized Composite Building Structures, Ltd is a company that researches and manufactures composite building structures. The company name suggests they focus on developing panelized and composite building components. They hold a registered trademark on their business name.
The document repeatedly lists the name and website of Composite Building Structures, LTD (www.CBS-Homes.com). It provides no other text or context. The document functions as an advertisement to promote the company Composite Building Structures and direct readers to their website www.CBS-Homes.com.
The document describes Composite Building Systems' LightMeUp whole-house 12-volt illumination system. The system uses solar panels, wind generators, or hot roof energy converters to collect power, stores it in deep cycle batteries, and distributes it via low voltage wiring to LED lights, lamps, and appliances. The system provides lighting equivalent to incandescent bulbs while using much less energy. It allows homes to be fully lit with 12-volt fixtures powered by renewable energy sources for minimal cost.
How information systems are built or acquired puts information, which is what they should be about, in a secondary place. Our language adapted accordingly, and we no longer talk about information systems but applications. Applications evolved in a way to break data into diverse fragments, tightly coupled with applications and expensive to integrate. The result is technical debt, which is re-paid by taking even bigger "loans", resulting in an ever-increasing technical debt. Software engineering and procurement practices work in sync with market forces to maintain this trend. This talk demonstrates how natural this situation is. The question is: can something be done to reverse the trend?
From Natural Language to Structured Solr Queries using LLMsSease
This talk draws on experimentation to enable AI applications with Solr. One important use case is to use AI for better accessibility and discoverability of the data: while User eXperience techniques, lexical search improvements, and data harmonization can take organizations to a good level of accessibility, a structural (or “cognitive” gap) remains between the data user needs and the data producer constraints.
That is where AI – and most importantly, Natural Language Processing and Large Language Model techniques – could make a difference. This natural language, conversational engine could facilitate access and usage of the data leveraging the semantics of any data source.
The objective of the presentation is to propose a technical approach and a way forward to achieve this goal.
The key concept is to enable users to express their search queries in natural language, which the LLM then enriches, interprets, and translates into structured queries based on the Solr index’s metadata.
This approach leverages the LLM’s ability to understand the nuances of natural language and the structure of documents within Apache Solr.
The LLM acts as an intermediary agent, offering a transparent experience to users automatically and potentially uncovering relevant documents that conventional search methods might overlook. The presentation will include the results of this experimental work, lessons learned, best practices, and the scope of future work that should improve the approach and make it production-ready.
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation F...AlexanderRichford
QR Secure: A Hybrid Approach Using Machine Learning and Security Validation Functions to Prevent Interaction with Malicious QR Codes.
Aim of the Study: The goal of this research was to develop a robust hybrid approach for identifying malicious and insecure URLs derived from QR codes, ensuring safe interactions.
This is achieved through:
Machine Learning Model: Predicts the likelihood of a URL being malicious.
Security Validation Functions: Ensures the derived URL has a valid certificate and proper URL format.
This innovative blend of technology aims to enhance cybersecurity measures and protect users from potential threats hidden within QR codes 🖥 🔒
This study was my first introduction to using ML which has shown me the immense potential of ML in creating more secure digital environments!
[OReilly Superstream] Occupy the Space: A grassroots guide to engineering (an...Jason Yip
The typical problem in product engineering is not bad strategy, so much as “no strategy”. This leads to confusion, lack of motivation, and incoherent action. The next time you look for a strategy and find an empty space, instead of waiting for it to be filled, I will show you how to fill it in yourself. If you’re wrong, it forces a correction. If you’re right, it helps create focus. I’ll share how I’ve approached this in the past, both what works and lessons for what didn’t work so well.
LF Energy Webinar: Carbon Data Specifications: Mechanisms to Improve Data Acc...DanBrown980551
This LF Energy webinar took place June 20, 2024. It featured:
-Alex Thornton, LF Energy
-Hallie Cramer, Google
-Daniel Roesler, UtilityAPI
-Henry Richardson, WattTime
In response to the urgency and scale required to effectively address climate change, open source solutions offer significant potential for driving innovation and progress. Currently, there is a growing demand for standardization and interoperability in energy data and modeling. Open source standards and specifications within the energy sector can also alleviate challenges associated with data fragmentation, transparency, and accessibility. At the same time, it is crucial to consider privacy and security concerns throughout the development of open source platforms.
This webinar will delve into the motivations behind establishing LF Energy’s Carbon Data Specification Consortium. It will provide an overview of the draft specifications and the ongoing progress made by the respective working groups.
Three primary specifications will be discussed:
-Discovery and client registration, emphasizing transparent processes and secure and private access
-Customer data, centering around customer tariffs, bills, energy usage, and full consumption disclosure
-Power systems data, focusing on grid data, inclusive of transmission and distribution networks, generation, intergrid power flows, and market settlement data
Dandelion Hashtable: beyond billion requests per second on a commodity serverAntonios Katsarakis
This slide deck presents DLHT, a concurrent in-memory hashtable. Despite efforts to optimize hashtables, that go as far as sacrificing core functionality, state-of-the-art designs still incur multiple memory accesses per request and block request processing in three cases. First, most hashtables block while waiting for data to be retrieved from memory. Second, open-addressing designs, which represent the current state-of-the-art, either cannot free index slots on deletes or must block all requests to do so. Third, index resizes block every request until all objects are copied to the new index. Defying folklore wisdom, DLHT forgoes open-addressing and adopts a fully-featured and memory-aware closed-addressing design based on bounded cache-line-chaining. This design offers lock-free index operations and deletes that free slots instantly, (2) completes most requests with a single memory access, (3) utilizes software prefetching to hide memory latencies, and (4) employs a novel non-blocking and parallel resizing. In a commodity server and a memory-resident workload, DLHT surpasses 1.6B requests per second and provides 3.5x (12x) the throughput of the state-of-the-art closed-addressing (open-addressing) resizable hashtable on Gets (Deletes).
Northern Engraving | Modern Metal Trim, Nameplates and Appliance PanelsNorthern Engraving
What began over 115 years ago as a supplier of precision gauges to the automotive industry has evolved into being an industry leader in the manufacture of product branding, automotive cockpit trim and decorative appliance trim. Value-added services include in-house Design, Engineering, Program Management, Test Lab and Tool Shops.
Conversational agents, or chatbots, are increasingly used to access all sorts of services using natural language. While open-domain chatbots - like ChatGPT - can converse on any topic, task-oriented chatbots - the focus of this paper - are designed for specific tasks, like booking a flight, obtaining customer support, or setting an appointment. Like any other software, task-oriented chatbots need to be properly tested, usually by defining and executing test scenarios (i.e., sequences of user-chatbot interactions). However, there is currently a lack of methods to quantify the completeness and strength of such test scenarios, which can lead to low-quality tests, and hence to buggy chatbots.
To fill this gap, we propose adapting mutation testing (MuT) for task-oriented chatbots. To this end, we introduce a set of mutation operators that emulate faults in chatbot designs, an architecture that enables MuT on chatbots built using heterogeneous technologies, and a practical realisation as an Eclipse plugin. Moreover, we evaluate the applicability, effectiveness and efficiency of our approach on open-source chatbots, with promising results.
Connector Corner: Seamlessly power UiPath Apps, GenAI with prebuilt connectorsDianaGray10
Join us to learn how UiPath Apps can directly and easily interact with prebuilt connectors via Integration Service--including Salesforce, ServiceNow, Open GenAI, and more.
The best part is you can achieve this without building a custom workflow! Say goodbye to the hassle of using separate automations to call APIs. By seamlessly integrating within App Studio, you can now easily streamline your workflow, while gaining direct access to our Connector Catalog of popular applications.
We’ll discuss and demo the benefits of UiPath Apps and connectors including:
Creating a compelling user experience for any software, without the limitations of APIs.
Accelerating the app creation process, saving time and effort
Enjoying high-performance CRUD (create, read, update, delete) operations, for
seamless data management.
Speakers:
Russell Alfeche, Technology Leader, RPA at qBotic and UiPath MVP
Charlie Greenberg, host
In the realm of cybersecurity, offensive security practices act as a critical shield. By simulating real-world attacks in a controlled environment, these techniques expose vulnerabilities before malicious actors can exploit them. This proactive approach allows manufacturers to identify and fix weaknesses, significantly enhancing system security.
This presentation delves into the development of a system designed to mimic Galileo's Open Service signal using software-defined radio (SDR) technology. We'll begin with a foundational overview of both Global Navigation Satellite Systems (GNSS) and the intricacies of digital signal processing.
The presentation culminates in a live demonstration. We'll showcase the manipulation of Galileo's Open Service pilot signal, simulating an attack on various software and hardware systems. This practical demonstration serves to highlight the potential consequences of unaddressed vulnerabilities, emphasizing the importance of offensive security practices in safeguarding critical infrastructure.
Lee Barnes - Path to Becoming an Effective Test Automation Engineer.pdfleebarnesutopia
So… you want to become a Test Automation Engineer (or hire and develop one)? While there’s quite a bit of information available about important technical and tool skills to master, there’s not enough discussion around the path to becoming an effective Test Automation Engineer that knows how to add VALUE. In my experience this had led to a proliferation of engineers who are proficient with tools and building frameworks but have skill and knowledge gaps, especially in software testing, that reduce the value they deliver with test automation.
In this talk, Lee will share his lessons learned from over 30 years of working with, and mentoring, hundreds of Test Automation Engineers. Whether you’re looking to get started in test automation or just want to improve your trade, this talk will give you a solid foundation and roadmap for ensuring your test automation efforts continuously add value. This talk is equally valuable for both aspiring Test Automation Engineers and those managing them! All attendees will take away a set of key foundational knowledge and a high-level learning path for leveling up test automation skills and ensuring they add value to their organizations.
Must Know Postgres Extension for DBA and Developer during MigrationMydbops
Mydbops Opensource Database Meetup 16
Topic: Must-Know PostgreSQL Extensions for Developers and DBAs During Migration
Speaker: Deepak Mahto, Founder of DataCloudGaze Consulting
Date & Time: 8th June | 10 AM - 1 PM IST
Venue: Bangalore International Centre, Bangalore
Abstract: Discover how PostgreSQL extensions can be your secret weapon! This talk explores how key extensions enhance database capabilities and streamline the migration process for users moving from other relational databases like Oracle.
Key Takeaways:
* Learn about crucial extensions like oracle_fdw, pgtt, and pg_audit that ease migration complexities.
* Gain valuable strategies for implementing these extensions in PostgreSQL to achieve license freedom.
* Discover how these key extensions can empower both developers and DBAs during the migration process.
* Don't miss this chance to gain practical knowledge from an industry expert and stay updated on the latest open-source database trends.
Mydbops Managed Services specializes in taking the pain out of database management while optimizing performance. Since 2015, we have been providing top-notch support and assistance for the top three open-source databases: MySQL, MongoDB, and PostgreSQL.
Our team offers a wide range of services, including assistance, support, consulting, 24/7 operations, and expertise in all relevant technologies. We help organizations improve their database's performance, scalability, efficiency, and availability.
Contact us: info@mydbops.com
Visit: https://www.mydbops.com/
Follow us on LinkedIn: https://in.linkedin.com/company/mydbops
For more details and updates, please follow up the below links.
Meetup Page : https://www.meetup.com/mydbops-databa...
Twitter: https://twitter.com/mydbopsofficial
Blogs: https://www.mydbops.com/blog/
Facebook(Meta): https://www.facebook.com/mydbops/
"Choosing proper type of scaling", Olena SyrotaFwdays
Imagine an IoT processing system that is already quite mature and production-ready and for which client coverage is growing and scaling and performance aspects are life and death questions. The system has Redis, MongoDB, and stream processing based on ksqldb. In this talk, firstly, we will analyze scaling approaches and then select the proper ones for our system.
Introducing BoxLang : A new JVM language for productivity and modularity!Ortus Solutions, Corp
Just like life, our code must adapt to the ever changing world we live in. From one day coding for the web, to the next for our tablets or APIs or for running serverless applications. Multi-runtime development is the future of coding, the future is to be dynamic. Let us introduce you to BoxLang.
Dynamic. Modular. Productive.
BoxLang redefines development with its dynamic nature, empowering developers to craft expressive and functional code effortlessly. Its modular architecture prioritizes flexibility, allowing for seamless integration into existing ecosystems.
Interoperability at its Core
With 100% interoperability with Java, BoxLang seamlessly bridges the gap between traditional and modern development paradigms, unlocking new possibilities for innovation and collaboration.
Multi-Runtime
From the tiny 2m operating system binary to running on our pure Java web server, CommandBox, Jakarta EE, AWS Lambda, Microsoft Functions, Web Assembly, Android and more. BoxLang has been designed to enhance and adapt according to it's runnable runtime.
The Fusion of Modernity and Tradition
Experience the fusion of modern features inspired by CFML, Node, Ruby, Kotlin, Java, and Clojure, combined with the familiarity of Java bytecode compilation, making BoxLang a language of choice for forward-thinking developers.
Empowering Transition with Transpiler Support
Transitioning from CFML to BoxLang is seamless with our JIT transpiler, facilitating smooth migration and preserving existing code investments.
Unlocking Creativity with IDE Tools
Unleash your creativity with powerful IDE tools tailored for BoxLang, providing an intuitive development experience and streamlining your workflow. Join us as we embark on a journey to redefine JVM development. Welcome to the era of BoxLang.
AppSec PNW: Android and iOS Application Security with MobSFAjin Abraham
Mobile Security Framework - MobSF is a free and open source automated mobile application security testing environment designed to help security engineers, researchers, developers, and penetration testers to identify security vulnerabilities, malicious behaviours and privacy concerns in mobile applications using static and dynamic analysis. It supports all the popular mobile application binaries and source code formats built for Android and iOS devices. In addition to automated security assessment, it also offers an interactive testing environment to build and execute scenario based test/fuzz cases against the application.
This talk covers:
Using MobSF for static analysis of mobile applications.
Interactive dynamic security assessment of Android and iOS applications.
Solving Mobile app CTF challenges.
Reverse engineering and runtime analysis of Mobile malware.
How to shift left and integrate MobSF/mobsfscan SAST and DAST in your build pipeline.
Essentials of Automations: Exploring Attributes & Automation ParametersSafe Software
Building automations in FME Flow can save time, money, and help businesses scale by eliminating data silos and providing data to stakeholders in real-time. One essential component to orchestrating complex automations is the use of attributes & automation parameters (both formerly known as “keys”). In fact, it’s unlikely you’ll ever build an Automation without using these components, but what exactly are they?
Attributes & automation parameters enable the automation author to pass data values from one automation component to the next. During this webinar, our FME Flow Specialists will cover leveraging the three types of these output attributes & parameters in FME Flow: Event, Custom, and Automation. As a bonus, they’ll also be making use of the Split-Merge Block functionality.
You’ll leave this webinar with a better understanding of how to maximize the potential of automations by making use of attributes & automation parameters, with the ultimate goal of setting your enterprise integration workflows up on autopilot.
Essentials of Automations: Exploring Attributes & Automation Parameters
Americas appropriate fit using today's tech
1. Appropriate Fit
Using Today’s
Technologies
to
Overcome Common
Building Problems
www.CBS-Homes.com
2. Current Conditions
• Labor intensive systems
– High cost skill trades, shortage of trained workers, poor workmanship,
inadequate supervision, inconsistent quality, energy inefficient, unmet
current needs, growing housing deficits - worldwide
• Building methods unchanged
– Escalating environmental damage, severe raw material cost cycles,
intermittent shortages, recurring disaster damage – resistance to change
• Constant pressure to build fast and cheap
– Overlooks innovation, relies on cheapest materials
– Little industry effort to improve construction methods
– No concern for long term costs of building ownership
Traditional Complacency Maintains status quo
“I only do what I know” mentality
www.CBS-Homes.com
3. Implication - “No-changes in Sight”
• Labor Intensive – Old Methods – Low Cost Materials
– Means
• No immediate universal fix of deficits
– Implications
• No evolving large scale solution “We have always done it this
way”
– Consequences
• A continuing series of band aid solutions rising deficits & no
solutions
– Until the CBS Egis® Home
• Automated Assembly with Construction Optimized Composites
www.CBS-Homes.com
4. High Speed - High Quality - Buildings
Egis®-Systems fight disasters and overcome deficits
www.CBS-Homes.com
5. A Simple Solution from CBS
• Replace traditional building materials with
– Disaster resistant composites
• Replace old building methods with
– Factory panelized buildings
• Use automotive assembly line production methods
– For rapid production
• Erect protective building shells for builders to finish
– Existing workers finish & deliver buildings
– No change in their tools, materials, or methods
– No retraining
www.CBS-Homes.com
6. Purpose
• Establish Manufacturing Base
– Generate jobs, income, & taxes
• Set up Construction Technology Centers
– Local population rebuilds country
– With rapid assembly & erection
– Trained on production line
• Overall strategy
– Adapt the products and methods to exactly fit needs
– Use local architects and engineers to adapt the system
for local preferences
8. CBS Stewardship Solution
Protect against losing natural resources
1 CBS assembly plant saves 15,000 acres (6,071 ha) of trees each year
3 CBS plants save 70 square miles (181 sq km) of trees each year
Where do we get our oxygen now?
Where are we going to get it later?
www.CBS-Homes.com
9. One Solution to Major Problems
• Hurricanes & Tornados Tons
• Earthquakes 45 41
• Insurance
40
• Termites
• Water 35
• Mold 30
• Fire 25
One Solution to Global Waste 20 17
1 ton of composite replaces* 15
17 tons of wood* (including waste)
10
41 tons of concrete block*
(mortar, steel, tie beams) 5 1
Environmentally friendly to the world 0
* In a 2,000 sq ft (186 sq m)
disaster resistant home
www.CBS-Homes.com
10. Any Building can be Panelized
Each Panel is Quick to Assemble, Simple to Automate,
Low cost to Transport, Easy to Erect, and Traditional to Finish
www.CBS-Homes.com
11. Years in Research & Development
• The Process
– Construction Optimized Pultruded Composite
• The Products
– 38 Patents Issued
– 3 Registered Trademarks
– Domestic & International Patents Pending
• The Methods
– Unique assembly line
– Modular jigs
www.CBS-Homes.com
12. Semi-complete Delivered and Erected
Foundation made by others,
Interiors and Exteriors finished by others
Any design, size, or style by local architects & engineers
www.CBS-Homes.com
13. Superior Longevity
Structure Now 300 +
Years
The Structural Frame is the most important part of every building
www.CBS-Homes.com
15. Automotive Progress
100
Years
1910
To
2010
Spectacular Progress !
www.CBS-Homes.com
16. Building Progress
400
Years
1600 1610
1941
to
2010
1913
No Significant Progress ! 2005
www.CBS-Homes.com
17. Composites are here and growing
Ladders Bridges
Seawalls Industrial Parts
www.CBS-Homes.com
18. Multiple Applications Rebar
Seawalls
Car Bodies
Now Composite Framing
Railing
Bridges
Ladders
www.CBS-Homes.com
19. Composites
have been
Optimized
for
Construction
Light & Strong
Environmentally Resistant
Assembles like Lego blocks
www.CBS-Homes.com
20. CBS Egis® - Studs
Stronger than Steel :: Lighter than wood :: Low cost to ship
www.CBS-Homes.com
21. CBS Egis®-walls
Stick
First of Built
2 floors
each
45m x 9m
5 Man
Crew
1 Day
www.CBS-Homes.com
22. CBS Egis® - Active Panel Roof
Low Cost
House Cooling
&
Alternative
Energy
Production
www.CBS-Homes.com
23. Optimum Resistance
Egis®-Wall
Maximum Engineered Resistance to
Earthquakes and Hurricanes
www.CBS-Homes.com
24. Use in Single & Multi Family Homes
• Replace
– Exterior block walls
– Infill walls
• Replace
– Aluminum, steel,
wood, & plastic
– With composite railing
– Decks, & Lanais
25. CBS Trains
&
Oversees
until
Self-sufficiency
is
Achieved
www.CBS-Homes.com
26. Community’s
Builder Academy
Trains & Assembles
Successful Housing Projects
CBS Construction Technology Centers™
are opportunities to instill pride and self-sufficiency
www.CBS-Homes.com
27. Panel Plants are Profitable
CBS Profit Comparison
$10,000
$8,000
Price
$6,000
Cost
$4,000
Profit
$2,000
$0
100 Sticks Kits Panels Modules
Sales Method
Profitability leads to business growth, expansion,
& growing corporate and private taxable incomes
www.CBS-Homes.com
28. Govern a Prosperous Economy
Use Composite Building Structures
to Overcome Deficits
www.CBS-Homes.com