The AM437x Application Board is a four layer Add-on Module for the AM437x PoM from Mistral built for the ARM-Cortex A9 Sitara AM437x SoC fromTexas Instruments.
A look at the types of tools and their development followed by a live demonstration of PROFIBUS and PROFINET device configuration using an open platform and web browser option.
PROFIBUS is a bi-directional digital communication
network for field devices.
Multi-drop network, many devices on one cable
communicates not only process values but also diagnostics,
device parameters, calibration and performance data etc.
The data can represent analogue values and/or
discrete (on/off) values.
But all data is digitally encoded and transmitted.
PROFIBUS is extensively specified.
All PROFIBUS devices are interoperable.
• Multi vendor systems are easily constructed.
• Best of breed devices can be selected.
• Common set of tools for maintenance and engineering.
This document provides an overview of PROFIBUS basics, including:
- PROFIBUS allows for high-speed data exchange between active stations like PLCs and passive stations like field devices using the same cable and components.
- It supports functions like parameterization, I/O configuration, data exchange, and diagnostics between a master and slave devices in a cyclic manner.
- The configuration tool allows users to select parameters and I/O for devices with electronic data sheets to enable plug-and-play functionality.
1) The document discusses device configuration tools and standards including EDDL, FDT, and FDI.
2) It provides a history of device configuration and the roadmap that led to cooperation between groups to develop a single common standard.
3) The goals of the cooperation were to develop a solution that is applicable to all device communication technologies, network topologies, and is compatible with existing device descriptions while becoming an international standard.
The document discusses the Crusoe processor developed by Transmeta Corporation. It has a hybrid hardware-software architecture that uses code morphing software to dynamically translate x86 instructions into VLIW instructions, allowing low power consumption. The Crusoe used this approach to execute up to four instructions per cycle on a VLIW engine while appearing like an x86 chip to software. It was well suited for mobile applications due to its efficient design and dynamic power management capabilities.
User Friendly
Flexible Installation
Best Diagnostics
Safety Integrated
Synchronicity for Motion integrated
High Availability
Secure IT-integration
Energy Efficiency
IO-Link integration
Huge Organisation and Support Structure
Profinet is one of “Industrial Ethernet” protocols. It is the most popular automation networking solution currently. PROFINET can be fully operational on a single network cable alongside other Industrial Ethernet’s including EtherNet/IP and Modbus/TCP.
ICP DAS USA provides a variety of Profinet gateways for data communication between Profinet and other protocols as well as Profinet I/O modules for your data acquisition and automation needs.
In this Free Webinar You Will Learn About
Introduction to Profinet
Profinet Components
Interfacing with Profinet
Profinet Gateways
I/O Addressing
Profinet with SCADA Software and OPC server
Learn more: www.icpdas-usa.com?r=slideshare
The number of installed PROFINET nodes is growing and growing. In this presentation we will discuss the use of PROFINET in process industry applications and compare its use to PROFIBUS which is a strong performer in the process industry.
A look at the types of tools and their development followed by a live demonstration of PROFIBUS and PROFINET device configuration using an open platform and web browser option.
PROFIBUS is a bi-directional digital communication
network for field devices.
Multi-drop network, many devices on one cable
communicates not only process values but also diagnostics,
device parameters, calibration and performance data etc.
The data can represent analogue values and/or
discrete (on/off) values.
But all data is digitally encoded and transmitted.
PROFIBUS is extensively specified.
All PROFIBUS devices are interoperable.
• Multi vendor systems are easily constructed.
• Best of breed devices can be selected.
• Common set of tools for maintenance and engineering.
This document provides an overview of PROFIBUS basics, including:
- PROFIBUS allows for high-speed data exchange between active stations like PLCs and passive stations like field devices using the same cable and components.
- It supports functions like parameterization, I/O configuration, data exchange, and diagnostics between a master and slave devices in a cyclic manner.
- The configuration tool allows users to select parameters and I/O for devices with electronic data sheets to enable plug-and-play functionality.
1) The document discusses device configuration tools and standards including EDDL, FDT, and FDI.
2) It provides a history of device configuration and the roadmap that led to cooperation between groups to develop a single common standard.
3) The goals of the cooperation were to develop a solution that is applicable to all device communication technologies, network topologies, and is compatible with existing device descriptions while becoming an international standard.
The document discusses the Crusoe processor developed by Transmeta Corporation. It has a hybrid hardware-software architecture that uses code morphing software to dynamically translate x86 instructions into VLIW instructions, allowing low power consumption. The Crusoe used this approach to execute up to four instructions per cycle on a VLIW engine while appearing like an x86 chip to software. It was well suited for mobile applications due to its efficient design and dynamic power management capabilities.
User Friendly
Flexible Installation
Best Diagnostics
Safety Integrated
Synchronicity for Motion integrated
High Availability
Secure IT-integration
Energy Efficiency
IO-Link integration
Huge Organisation and Support Structure
Profinet is one of “Industrial Ethernet” protocols. It is the most popular automation networking solution currently. PROFINET can be fully operational on a single network cable alongside other Industrial Ethernet’s including EtherNet/IP and Modbus/TCP.
ICP DAS USA provides a variety of Profinet gateways for data communication between Profinet and other protocols as well as Profinet I/O modules for your data acquisition and automation needs.
In this Free Webinar You Will Learn About
Introduction to Profinet
Profinet Components
Interfacing with Profinet
Profinet Gateways
I/O Addressing
Profinet with SCADA Software and OPC server
Learn more: www.icpdas-usa.com?r=slideshare
The number of installed PROFINET nodes is growing and growing. In this presentation we will discuss the use of PROFINET in process industry applications and compare its use to PROFIBUS which is a strong performer in the process industry.
PROFIBUS and PROFINET are fieldbus communication protocols, with PROFIBUS being the older standard developed over 25 years ago for industrial automation applications. PROFIBUS is suited for high-speed synchronized applications like robotics, while PROFINET is an newer standardized Industrial Ethernet protocol that provides high-speed deterministic networking capabilities. Both support masters and slaves to control data exchange, with PROFIBUS having variants like DP, PA, and FMS and PROFINET using IO and CBA function classes to distribute devices and applications.
The document introduces the new Saia PCD2.M4x60 CPU. It has a flat housing shape for space-saving applications and is a modular CPU that is freely programmable for small to large applications. It has 4 slots for PCD2 I/O modules and can support up to 64 I/O locally or up to 1024 I/O when extended. The CPU is compatible with other PCD controller programs and is powerful, compact, modular and extendable.
Ethercat.org industrial ethernet technologiesKen Ott
This document provides an overview of various industrial ethernet technologies. It divides the technologies into three classes - Class A uses standard ethernet hardware and TCP/IP, Class B uses standard hardware but a dedicated process data protocol, and Class C uses dedicated hardware for high performance. The document then summarizes key aspects of several industrial ethernet technologies, including PROFINET, comparing their performance, capabilities and limitations.
The successful application of industrial networks depends on good planning and robust design. We’ll look at some of the considerations around PROFIBUS DP/PA network design, networking components, network drawings and the tools available to assist you. As ethernet based networks become more popular, can the existing plant networks continue to be utilised?
A look at the available device configuration tools and their development including the move to unify the different types into one format – FDI. This will be followed by a live demonstration of PROFIBUS and PROFINET device configuration using an existing open platform and web browser option.
The document discusses Actuator Sensor Interface (ASI), an open bus system that connects actuators and sensors to a controller via a 2-wire cable for simultaneous power and data transfer. Key benefits of ASI include easy installation, replacement of modules without interrupting power, and comprehensive diagnostic options. The system components include a master, power supply, cables, slaves, and accessories like repeaters and addressing units.
Practical steps for a successful project, Xiu Ji. PROFIBUS Seminar at MTC, Coventry, 2013.
Basics of PROFIBUS
Considerations at the design stage
Installation
Visual Checks
Fieldbus is a digital communication network that replaces the existing 4-20 mA analog standard. It uses a bi-directional, multi-drop, serial-bus network to connect field devices like sensors, actuators, and controllers. Foundation fieldbus is an open architecture that uses digital communication over two wire pairs to connect intelligent field devices and distribute control applications across the network. It provides benefits like reduced wiring, self-diagnostics, improved control capability, and integration with information systems. While fieldbus offers advantages in cost savings and performance, it also has some disadvantages like increased complexity, higher component costs, and risks around standards.
An overview of the Group’s structure and global representation, taking a look at the protocol basics and their differences, plus showing the progress of the number of installed devices from the group’s supported technologies and relating these figures to their market share.
The document provides an overview of commissioning and maintaining PROFIBUS networks. It discusses typical faults that may occur, such as devices failing to reply due to cable damage. It emphasizes the importance of having the proper tools, such as a PROFIBUS analyzer, and expertise to diagnose issues. The document uses examples from the ProfiTrace analyzer to demonstrate how it can be used to check network performance, device communication, and waveforms. It also discusses how the analyzer can be used for commissioning new networks or sections of networks before a PLC is connected.
The HART (Highway Addressable Remote Transducer) is a master/slave communication protocol which provides for up to two masters. The secondary master can be used to monitor/control the information of the HART bus. HART can be used in various modes such as point-to-point or multi-drop for communicating information to/from smart field instruments and central control or monitoring systems.
Learn more: http://www.icpdas-usa.com/hart_gateways.html?r=slideshare
This document discusses wide area networks and their requirements. It covers various wide area network facilities including point-to-point analog and digital circuits. It describes IBM's Systems Network Architecture (SNA) which was an early mainframe-based network architecture. The document also mentions very small aperture terminals (VSAT) and T1/E1 and fractional T3/E3 circuits. It concludes that wide area networks are widely used globally to connect countries.
A cable harness can also be known as a cable assembly, wire harness, wiring loom or a wiring assembly, and is best described as a string of wires or cables that are capable of transmitting informational signals or operating currents. Data Patterns has built high reliability Cable Harness Test Systems for large installations. These are primarily used in launch vehicle aircraft and missile level cable harness test validation.
Keynote address: Latest developments in Time Sensitive Networking (TSN), PROFINET in Process applications, Advanced Physical Layer (APL), OPC-UA and Industry 4.0
The GET-1032BD controller is a flexible platform for control applications using a Rabbit 4000 processor. It has 512KB of flash memory, 512KB of fast RAM, and 512KB of battery-backed RAM. It includes 8 digital inputs, 8 analog inputs, 8 digital outputs, and 8 analog outputs. Communication interfaces include 2 RS485 ports, 1 RS232 port, USB, and Ethernet. The controller is housed in a DIN rail mountable enclosure and is programmable using Dynamic C.
A look at the available device configuration tools and their development including the move to unify the different types into one format – FDI. This will be followed by a live demonstration of PROFIBUS and PROFINET device configuration using an existing open platform and web browser option.
The SIPROTEC Compact 7SJ81 provides 4 low-power current transformer inputs and optionally 3 low-power voltage transformer inputs. With the same low-power current transformer (LPCT) a wide range of primary rated line currents can be covered. Objects with rated currents in the range from 20 A to 2500 A can be protected when using low-power current transformers.
The document discusses netIOT, an industrial cloud communication solution from Hilscher Gesellschaft. It provides an interface between industrial field devices and cloud/IoT applications. The netIOT family includes an interface that can be embedded in field devices, edge gateways that bridge devices and clouds, and services for creating value from cloud data. It allows accessing existing field data infrastructure for uses like predictive maintenance, remote device configuration, and improving overall equipment effectiveness. Standards like OPC UA and MQTT enable communication from the field to the cloud.
Interroll DC Platform From standard applications to systems with Industry 4.0...Interroll Group
Smart: Interroll DC Platform
From standard applications to systems with Industry 4.0 functionality
The new DC Platform has the perfect solution to any request.
Many system integrators and plant constructors face the challenge of how to
cost-effectively create a tailored system with plug-and-play solutions. The new DC Platform from Interroll is a high-performance technology platform that does just that. It offers – from a single supplier – an innovative, coordinated range of technological solutions, all based on years of development and testing.
Application Note on Building a Smart Energy Gateway solutionMistral Solutions
Energy gateways connect smart devices in the home and allow control and monitoring of energy usage. They form the center of a home area network. When designing an energy gateway, considerations include interfaces for smart meters and standards-based communication, as well as a user interface. An energy gateway solution can be built using the AM437x system-on-module, which provides processing power, wireless connectivity, interfaces, and software support for building a smart energy gateway and home automation system.
This issue of AXIOM is dedicated to processing and power and in these pages we bring together a team of industry experts to talk about what you need to know in these areas. Avnet’s advanced architechtures expert Jim Carver gets to the heart of the ARM processor cores – explaining the history of ARM’s first offering through the current ecosystem of products, as well as and their functionality. And because no one likes to be in the dark, Chris Ammann explains why it is so critical for FPGA designers to plan for their board power at the beginning of the design process. Doug Geisler looks at how industrial OEMs have started to act like consumer electronics companies, or the “consumerization” of the market, and outlines the benefits and challenges to this new experience.
PROFIBUS and PROFINET are fieldbus communication protocols, with PROFIBUS being the older standard developed over 25 years ago for industrial automation applications. PROFIBUS is suited for high-speed synchronized applications like robotics, while PROFINET is an newer standardized Industrial Ethernet protocol that provides high-speed deterministic networking capabilities. Both support masters and slaves to control data exchange, with PROFIBUS having variants like DP, PA, and FMS and PROFINET using IO and CBA function classes to distribute devices and applications.
The document introduces the new Saia PCD2.M4x60 CPU. It has a flat housing shape for space-saving applications and is a modular CPU that is freely programmable for small to large applications. It has 4 slots for PCD2 I/O modules and can support up to 64 I/O locally or up to 1024 I/O when extended. The CPU is compatible with other PCD controller programs and is powerful, compact, modular and extendable.
Ethercat.org industrial ethernet technologiesKen Ott
This document provides an overview of various industrial ethernet technologies. It divides the technologies into three classes - Class A uses standard ethernet hardware and TCP/IP, Class B uses standard hardware but a dedicated process data protocol, and Class C uses dedicated hardware for high performance. The document then summarizes key aspects of several industrial ethernet technologies, including PROFINET, comparing their performance, capabilities and limitations.
The successful application of industrial networks depends on good planning and robust design. We’ll look at some of the considerations around PROFIBUS DP/PA network design, networking components, network drawings and the tools available to assist you. As ethernet based networks become more popular, can the existing plant networks continue to be utilised?
A look at the available device configuration tools and their development including the move to unify the different types into one format – FDI. This will be followed by a live demonstration of PROFIBUS and PROFINET device configuration using an existing open platform and web browser option.
The document discusses Actuator Sensor Interface (ASI), an open bus system that connects actuators and sensors to a controller via a 2-wire cable for simultaneous power and data transfer. Key benefits of ASI include easy installation, replacement of modules without interrupting power, and comprehensive diagnostic options. The system components include a master, power supply, cables, slaves, and accessories like repeaters and addressing units.
Practical steps for a successful project, Xiu Ji. PROFIBUS Seminar at MTC, Coventry, 2013.
Basics of PROFIBUS
Considerations at the design stage
Installation
Visual Checks
Fieldbus is a digital communication network that replaces the existing 4-20 mA analog standard. It uses a bi-directional, multi-drop, serial-bus network to connect field devices like sensors, actuators, and controllers. Foundation fieldbus is an open architecture that uses digital communication over two wire pairs to connect intelligent field devices and distribute control applications across the network. It provides benefits like reduced wiring, self-diagnostics, improved control capability, and integration with information systems. While fieldbus offers advantages in cost savings and performance, it also has some disadvantages like increased complexity, higher component costs, and risks around standards.
An overview of the Group’s structure and global representation, taking a look at the protocol basics and their differences, plus showing the progress of the number of installed devices from the group’s supported technologies and relating these figures to their market share.
The document provides an overview of commissioning and maintaining PROFIBUS networks. It discusses typical faults that may occur, such as devices failing to reply due to cable damage. It emphasizes the importance of having the proper tools, such as a PROFIBUS analyzer, and expertise to diagnose issues. The document uses examples from the ProfiTrace analyzer to demonstrate how it can be used to check network performance, device communication, and waveforms. It also discusses how the analyzer can be used for commissioning new networks or sections of networks before a PLC is connected.
The HART (Highway Addressable Remote Transducer) is a master/slave communication protocol which provides for up to two masters. The secondary master can be used to monitor/control the information of the HART bus. HART can be used in various modes such as point-to-point or multi-drop for communicating information to/from smart field instruments and central control or monitoring systems.
Learn more: http://www.icpdas-usa.com/hart_gateways.html?r=slideshare
This document discusses wide area networks and their requirements. It covers various wide area network facilities including point-to-point analog and digital circuits. It describes IBM's Systems Network Architecture (SNA) which was an early mainframe-based network architecture. The document also mentions very small aperture terminals (VSAT) and T1/E1 and fractional T3/E3 circuits. It concludes that wide area networks are widely used globally to connect countries.
A cable harness can also be known as a cable assembly, wire harness, wiring loom or a wiring assembly, and is best described as a string of wires or cables that are capable of transmitting informational signals or operating currents. Data Patterns has built high reliability Cable Harness Test Systems for large installations. These are primarily used in launch vehicle aircraft and missile level cable harness test validation.
Keynote address: Latest developments in Time Sensitive Networking (TSN), PROFINET in Process applications, Advanced Physical Layer (APL), OPC-UA and Industry 4.0
The GET-1032BD controller is a flexible platform for control applications using a Rabbit 4000 processor. It has 512KB of flash memory, 512KB of fast RAM, and 512KB of battery-backed RAM. It includes 8 digital inputs, 8 analog inputs, 8 digital outputs, and 8 analog outputs. Communication interfaces include 2 RS485 ports, 1 RS232 port, USB, and Ethernet. The controller is housed in a DIN rail mountable enclosure and is programmable using Dynamic C.
A look at the available device configuration tools and their development including the move to unify the different types into one format – FDI. This will be followed by a live demonstration of PROFIBUS and PROFINET device configuration using an existing open platform and web browser option.
The SIPROTEC Compact 7SJ81 provides 4 low-power current transformer inputs and optionally 3 low-power voltage transformer inputs. With the same low-power current transformer (LPCT) a wide range of primary rated line currents can be covered. Objects with rated currents in the range from 20 A to 2500 A can be protected when using low-power current transformers.
The document discusses netIOT, an industrial cloud communication solution from Hilscher Gesellschaft. It provides an interface between industrial field devices and cloud/IoT applications. The netIOT family includes an interface that can be embedded in field devices, edge gateways that bridge devices and clouds, and services for creating value from cloud data. It allows accessing existing field data infrastructure for uses like predictive maintenance, remote device configuration, and improving overall equipment effectiveness. Standards like OPC UA and MQTT enable communication from the field to the cloud.
Interroll DC Platform From standard applications to systems with Industry 4.0...Interroll Group
Smart: Interroll DC Platform
From standard applications to systems with Industry 4.0 functionality
The new DC Platform has the perfect solution to any request.
Many system integrators and plant constructors face the challenge of how to
cost-effectively create a tailored system with plug-and-play solutions. The new DC Platform from Interroll is a high-performance technology platform that does just that. It offers – from a single supplier – an innovative, coordinated range of technological solutions, all based on years of development and testing.
Application Note on Building a Smart Energy Gateway solutionMistral Solutions
Energy gateways connect smart devices in the home and allow control and monitoring of energy usage. They form the center of a home area network. When designing an energy gateway, considerations include interfaces for smart meters and standards-based communication, as well as a user interface. An energy gateway solution can be built using the AM437x system-on-module, which provides processing power, wireless connectivity, interfaces, and software support for building a smart energy gateway and home automation system.
This issue of AXIOM is dedicated to processing and power and in these pages we bring together a team of industry experts to talk about what you need to know in these areas. Avnet’s advanced architechtures expert Jim Carver gets to the heart of the ARM processor cores – explaining the history of ARM’s first offering through the current ecosystem of products, as well as and their functionality. And because no one likes to be in the dark, Chris Ammann explains why it is so critical for FPGA designers to plan for their board power at the beginning of the design process. Doug Geisler looks at how industrial OEMs have started to act like consumer electronics companies, or the “consumerization” of the market, and outlines the benefits and challenges to this new experience.
This document provides information on various industrial communication solutions from Molex for Rockwell Automation's Encompass program, including:
- Communication modules that connect Rockwell ControlLogix and CompactLogix PLCs to networks like Modbus, PROFIBUS, AS-Interface, and DeviceNet.
- Network interface cards, remote I/O modules, and diagnostic tools that enable communication over industrial Ethernet and fieldbus protocols.
- Software development kits and drivers that facilitate communication between industrial devices and Windows-based applications over Ethernet TCP/IP and serial networks.
Découvrez le large éventail de solutions technologiques avancées, de composants électroniques et de services personnalisés que nous proposons aux concepteurs et aux fabricants de tous types de systèmes militaires sur terre, mer et air.
PHYTEC Quick Intro
A 30+ Years German OEM company manufacturing Industrial grade Embedded System On Modules based on ARM processors from Semiconductor companies like Texas Instruments, NXP, Qualcomm, Microchip, Rockchip.
Pioneer in Enabling Industrial IoT with Gateway, Sensor Nodes with ease of cloud integration with Amazon AWS, Microsoft Azure, Google Cloud, IBM Watson IoT Platform.
Powerful processors modules are ready to build custom Edge Gateway devices.
The Rear-transition Module – Break-out Card (RTM-BOC)
from Mistral is an eight layer plug-in module. In addition, the RTM BOC contains four Gigabit Ethernet ports with PHY to support the SGMII lanes on the RTM connector.
Building Industrial IoT Gateway using ARM SBCVasu Dev
This document discusses industrial IoT gateways and embedded systems. It provides an overview of PHYTEC's products and services for building IoT gateways. These include system on modules with various ARM processors, single board computers, and development services. It also discusses different types of IoT gateways based on the microcontroller, microprocessor, or system on chip used. Various operating systems, hardware interfaces, and wireless connectivity options are outlined. Potential applications mentioned include industrial automation, healthcare, transportation, and smart agriculture.
iWave Systems Technologies, established in 1999, focuses on Product outlook Engineering Services involving Embedded Hardware, FPGA and Software. iWave’s Hardware expertise spans complex board design up to 30 layers; Analog , Digital & RF Designs; FPGA Development up to 3+ million gates and VHDL / Verilog RTL Development & Verification. Our Software expertise ranges from OS Porting, Firmware & Device Drivers Development and Wireless & Protocol Stacks to Embedded Application Development
The company designs and develops cutting edge products and solutions. iWave has been an innovator in developing highly integrated, high performance, low power and low cost System-On-Modules(SOM) and Development Platforms. iWave has been able to develop advanced products for its customers using its SOMs in the shortest possible time at the most optimized design cost.
AXONIM Devices - expert in design and development of the embedded electronics on RTOS, complex/single board computers, digital signal processing algorithms, electronics processor devices, PCBA, digital circuits, hardware, firmware development, enterprise hardware & software solutions, distributing systems.
Electronic embedded systems development, electronic devices design, algorithms and software are the main areas of activity of the AXONIM.
The development process starts with an assessment of the customer's technical requirements of the project that is done by our expert group, if required they perform research and write technical specification, then project team prepares working project plan.
The immediate development of a technical system - device, embedded electronic system, or electronic module consists of the design of the hardware platform, software development, device body design, further prototyping - manufacturing of prototypes and the subsequent technical support throughout the life cycle of the device.
Our competences include, but are not limited with the following types of engineering tasks: algorithms for digital signal processing (filtering, processing of audio and video streams, encoding / decoding, compression / decompression), data collection systems, electronic optical devices, porting BSP embedded OS (Windows Embedded, Linux, Android, eCos, freeRTOS) and others. The result of our service is a full-featured prototype device and a set of design documentation, which allows to start production of the final product.
Aspire provides embedded product engineering design and manufacturing services. It has over 300 customers and has developed over 1000 products. It focuses on hardware design, embedded software development, and offers services across various industries like automotive, consumer electronics, and networking. It has capabilities in areas like board design, firmware development, testing, and certification.
IAR Systems and Atmel have extended their partnership to include over 1,400 new example projects in IAR Systems' development tools to support Atmel's entire portfolio of microcontrollers and microprocessors. The integration of Atmel's reference application examples into IAR Embedded Workbench will significantly increase developers' productivity and reduce time-to-market for bringing products to market. IAR Systems is committed to providing world-class development tools across Atmel's range of microcontroller architectures to help designers develop complex embedded systems.
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2022/06/arm-cortex-m-series-processors-spark-a-new-era-of-use-cases-enabling-low-cost-low-power-computer-vision-and-machine-learning-a-presentation-from-arm/
Stephen Su, Senior Product Manager at Arm, presents the “Arm Cortex-M Series Processors Spark a New Era of Use Cases, Enabling Low-cost, Low-power Computer Vision and Machine Learning” tutorial at the May 2022 Embedded Vision Summit.
The Arm Cortex-M processor family of microcontrollers is designed and optimized for cost- and energy-efficient devices, and can be found in a variety of applications such as the internet of things devices, industrial equipment and consumer electronics. As awareness has grown about the benefits of incorporating visual intelligence into systems, there’s increased interest in implementing both classical computer vision and machine learning in cost- and energy-constrained devices such as video doorbells.
In this talk, Su explores the computer vision and machine learning capabilities of Arm’s ultra-low power Cortex-M0+, Cortex-M4 and Cortex-M7 processors with DSP instruction set extensions, as well as the latest Cortex-M55, which delivers tremendous performance and efficiency via the M-profile vector instruction set extensions based on Arm Helium technology. He also showcases how Arm is empowering the entire CV/ML ecosystem—including silicon partners, ISVs, OSVs, developers and OEMs—with reference software and development tools.
Considerations on usage of Computer on Modules for Applications inside Emerge...Toradex
This document discusses considerations for using computer modules in emergency response vehicles. It describes a project where an Italian municipality needed a rugged, scalable computing platform for its emergency vehicles. A solution was developed using Diamond Systems' Eaglet carrier board coupled with Toradex Apalis computer-on-modules. This provided a flexible, long-life system that met the client's needs within budget. The modular design allows easy processor upgrades or replacements to extend the product lifetime.
- Ankit Sarin has over 7 years of experience in embedded firmware development, hardware design, and integration testing. He has worked on projects in various domains including industrial automation, SCADA, rail, oil and gas, and consumer products.
- His skills include embedded C/C++, assembly language, various protocols and interfaces. He has experience with development tools and environments on 8/16/32 bit platforms.
- His most recent role is as a senior software engineer at Larsen & Toubro where he works on firmware development for solar inverters and railway products. Previously he has worked on projects for Invensys, Cognizant, and Philips.
The RZ/G1E SMARC module developed by Mistral is a small form-factor, high performance module built around the 1GHz Renesas RZ/G1E dual ARM Cortex-A7
microprocessor (MPU).
LINKSTAR TECHNOLOGIES LIMITED, based in the USA, with Worldwide Distribution and Sales office in Hongkong is a synergy in Communications Technology, with Design, Development & EMS Facilities (Electronics & Telecommunications) in India. Linkstar provides solutions and value to Manufacturers and System Integrators. LINKSTAR has expertise and resources to design, develop & manufacture “Electronics & Communication” products from concept for System Integrators and OEMs.
Our areas of expertise range from Services in the “Design and Development” (Electronics and Telecommunication”), and EMS (Electronics Manufacturing Services) for OEMs.
We invite Regional Distributors & Channel Partners for our products and services.
Since our commencement in the year 1984, we, “Electro Engineering Enterprises”, are an ISO 9001:2008 certified firm, which is one of the leading manufacturers, suppliers and exporters of Data Acquisition Systems, Industrial Communication, Networking & Power system Products. Offered products are Industrial Computer Chassis, Embedded Box Computers, Programmable Automation Controller, Industrial Ethernet Switches, Wireless Communication System, CCTV Cameras, Digital Signage System, DC to DC Converter and Industrial Media Converter, to name a few. Also, we offer RS485/Ethernet Based DAQ Modules, USB Modules (Data Acquisition Systems), PCI Cards, Data Acquisition Module using premium grade components. The Power Supplies in power electronics division are sourced from reputed names such as Meanwell Taiwan, Digitronics and Spectron.
We want to wish you all Industries Happy Closing of Business Year 2020-2021 after having world LOCKDOWN due to Pandemic CORONA.
This Year we all has to change our Working Culture and Adopt System to understand how we can evolve with Industries without Physical meeting ,develop our Communication Skill and Product Knowledge.
Let's Work Human and Technologies to Gather and Link Vue System will offer Product &Support End 2 End Solutions from Concept Design Engineering ,BOQ , Installation
Electrical Safety Earthing ,lightning ,Surge Protection , Automation ,Protocol Converter, Networking LAN ,Fiber, Wireless, CCTV, Fire Alarm, Access Controls,Security System, PIDS, Street Light LED ,Industrial Plug&Socket , Freedom Connectors for Building Wiring, MC 4 Connectors ,Cable&Connectors for Electric Vehicle,
We invite Architect, Electrical Consultant , MEP Consultant, Electrical Vehicle Charging Infra, Solar PV Power ,High Energy Battery Storage, Substation Automation, RT-DAS Projects, Oil &Gas ,Tunnel Rail Road, Rail Transportation, Airport Infra, Building Infra, Telecom Infra ,Smart City
EPC Companies, Electrical Project Contractors ,Project Engineering Departments.
We are also Inviting for Distribution and Dealer Network of our products in India, Bangladesh, Australia and Singapore
Pactron is an electronics manufacturing services provider that offers end-to-end design and manufacturing services. They have expertise in board-level design, engineering, and manufacturing. Pactron can compress time to market for customers through their integrated approach from design to manufacturing. They have experience serving industries such as semiconductor, medical devices, telecom, aerospace, and defense.
This paper proposes an algorithm to determine the top and bottom field order in interlaced video when that information is not provided by the video decoder. Knowing the field order is important for de-interlacing algorithms to reconstruct frames with minimal artifacts. The algorithm works by interpolating lines in assumed top fields and comparing pixel values to bottom lines, calculating confidence values for each field assumption. It then determines if the field order is correct or swapped based on the confidence values. The algorithm needs to run periodically to re-check the field order if the video input is disconnected and reconnected.
In this article, we will demonstrate how a sample thermal printer can be interfaced with Mistral’s AM437x Product on Module. The AM437x POM is an ideal platform to build Point-of-Sale Terminal Devices with Thermal Printing Capability.
IoT based Industrial Gateway (IoT-SDK) built around Sitara™ AM437x processors...Mistral Solutions
Internet of Things (IoT) is a lot more than just connected devices and seamless communication. The emerging IoT is having a sweeping effect on the way goods are produced, triggering another industrial revolution – Industry 4.0.
Designing a Product on Module for Health and Wellness ApplicationsMistral Solutions
Mistral designed a small, battery-operated product on module (PoM) for a customer to detect and monitor vital health statistics like temperature, blood pressure, heart rate, and more. The PoM uses an ARM Cortex M3 microcontroller with sensors, memory, Bluetooth, and an Android app to display readings. It achieves long battery life and accurate sensor readings comparable to leading brands. The modular design allows customizing the application board for other medical and industrial uses.
The customer, a leader in robotics, wanted to develop a new drone controlled by smartphone. They approached Mistral to develop an iOS app for the drone with photo/video capture, editing, transfer, and sharing features. Mistral designed the app to have a similar user experience to the iOS camera app. They developed the app using Swift and helped the customer finalize requirements. The solution enabled the customer to test drone hardware and improve media capture features ahead of schedule.
This White Paper talks of different aspects of Hardware and Software co-design with respect to embedded product design and the need need for co-design along side many more aspects.
Power Spikes Isolation to avoid corruption within sensitive ICs SolutionsMistral Solutions
The document describes a case study of resolving a power spike issue in a system. The power spikes were occurring during insertion of the power supply and corrupting an ASIC chip designed for tamper detection. Various attempts were made to filter the spike such as using capacitors, chokes, and diodes, but these did not work due to the high frequency of the spike. Finally, the issue was resolved by completely isolating the power and ground of the ASIC section using DC-DC isolation, as well as isolating interface signals, which prevented the spike from reaching the ASIC.
In this technical article, we present a Novel algorithm for the lossy compression method, where the performance and storage has been proscribed with hardware descriptive language (HDL).
In this Case Study read about Mistral’s expertise in designing a flexible and easily upgrade-able Video recording & processing solution with high resolution and frame rate for defense and aerospace applications.
Customized Silicon /System-on-Chip (SoC) from Mistral address the scalability and lesser turn-around time for product development in the Industrial automation domain.
In the age of seamless connectivity, standalone, single function media devices have converged into feature rich, complex, up-gradable, connected infotainment devices. Have a look at the Infographic designed by Mistral explaining the amazing world of Infotainment!
SONAR subsystems consist of underwater transducers, data recorders, controllers, signal processing and display systems. Have a look at the Infographic designed by Mistral explaining what SONAR is all about!
Want to know more about Drones? Have a look at the Infographic by Mistral explaining what Drones are all about!
https://www.mistralsolutions.com/wp-content/uploads/2014/03/infographic_Drone.html
The Nano SOM from Mistral is an extremely small footprint (44mm * 26 mm) System-on-Module; weighing just 7gms; which can be used directly in your end product design.
Software Engineering and Project Management - Introduction, Modeling Concepts...Prakhyath Rai
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024Sinan KOZAK
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Null Bangalore | Pentesters Approach to AWS IAMDivyanshu
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Batteries -Introduction – Types of Batteries – discharging and charging of battery - characteristics of battery –battery rating- various tests on battery- – Primary battery: silver button cell- Secondary battery :Ni-Cd battery-modern battery: lithium ion battery-maintenance of batteries-choices of batteries for electric vehicle applications.
Fuel Cells: Introduction- importance and classification of fuel cells - description, principle, components, applications of fuel cells: H2-O2 fuel cell, alkaline fuel cell, molten carbonate fuel cell and direct methanol fuel cells.
Design and optimization of ion propulsion dronebjmsejournal
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Rainfall intensity duration frequency curve statistical analysis and modeling...bijceesjournal
Using data from 41 years in Patna’ India’ the study’s goal is to analyze the trends of how often it rains on a weekly, seasonal, and annual basis (1981−2020). First, utilizing the intensity-duration-frequency (IDF) curve and the relationship by statistically analyzing rainfall’ the historical rainfall data set for Patna’ India’ during a 41 year period (1981−2020), was evaluated for its quality. Changes in the hydrologic cycle as a result of increased greenhouse gas emissions are expected to induce variations in the intensity, length, and frequency of precipitation events. One strategy to lessen vulnerability is to quantify probable changes and adapt to them. Techniques such as log-normal, normal, and Gumbel are used (EV-I). Distributions were created with durations of 1, 2, 3, 6, and 24 h and return times of 2, 5, 10, 25, and 100 years. There were also mathematical correlations discovered between rainfall and recurrence interval.
Findings: Based on findings, the Gumbel approach produced the highest intensity values, whereas the other approaches produced values that were close to each other. The data indicates that 461.9 mm of rain fell during the monsoon season’s 301st week. However, it was found that the 29th week had the greatest average rainfall, 92.6 mm. With 952.6 mm on average, the monsoon season saw the highest rainfall. Calculations revealed that the yearly rainfall averaged 1171.1 mm. Using Weibull’s method, the study was subsequently expanded to examine rainfall distribution at different recurrence intervals of 2, 5, 10, and 25 years. Rainfall and recurrence interval mathematical correlations were also developed. Further regression analysis revealed that short wave irrigation, wind direction, wind speed, pressure, relative humidity, and temperature all had a substantial influence on rainfall.
Originality and value: The results of the rainfall IDF curves can provide useful information to policymakers in making appropriate decisions in managing and minimizing floods in the study area.
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
AM437x Application board
1. D A T A S H E E T
AM437x Application Board
AM437x Application Board is a four layer Add-on Module for AM437x PoM from Mistral built for the ARM-Cortex A9 Sitara AM437x SoC from
Texas Instruments. The AM437x Application Board interfaces with PoM through its expansion connectors and provides general purpose 7” LCD
withcapacitivetouchscreenalongwithkeypadandsensorslikeAmbientlight(ALS),Temperature,Accelerometer.
The AM437x Application Board supports Industrial interfaces such as RS485, CAN/Profibus, Ether CAT, Dual motor control, Endat/eQEP encoders
and ADC for motor current sensing. It also supports ZigBee communication using TI’s CC2530 ZigBee module interfaced externally via its
expansionconnectors.
The AM437x Application Board provides flexible powering options for both Industrial/Home Applications as well as other general purpose
interfaceswhichareavailableviatheAM437xPoM.
O v e r v i e w
Features
:
:
:
:
:
:
:
:
:
:
:
:
:
Four-layer PCB with FR-4 dielectric material, thickness
of about 1.6mm
User Interface
7” LCD with Capacitive Touch Controller
LED and KEYPAD buttons
Sensors
Ambient Light Sensor, Temperature Sensor
3- axis Accelerometer
Communication
RS-485/CAN/Profibus
EtherCAT
Supports TI’s CC2530 ZigBee module via additional
Expansion Connectors
Control
Dual Motor Control
Interfaces
ADC for Motor Current Sense
EnDAT/eQEP
Board Dimension
190mm x 165mm
Temperature
Commercial Grade
Power Input
+24V DC for AM437x Application Board and AM437x PoM RevB
(when industrial interfaces are used)
+5V DC for AM437x Application Board and AM437x PoM RevB
(when other general purpose interfaces are used)
Software
Android KitKat support
The AM437x Application Board when connected with AM437x PoM
can be used for building products for Industrial Automation, Home
Automation and Biometrics.
:
:
:
Applications