HWI has broad experience developing embedded firmware and applications software across a wide range of processors and systems, including DSP chips. They have expertise with programming tools for microcontrollers from manufacturers such as Motorola, Texas Instruments, Microchip, Infineon, and Toshiba. HWI also has experience with real-time operating systems, compilers, debuggers, emulators, and other software tools to develop embedded applications from idea to finished product.
Craneboard, from Mistral, is a hardware development platform that enables customers to develop general purpose computing and other applications based on the Sitara AM3517 ARM Cortex - A8 microprocessor device. Craneboard is a low cost, open source reference platform to help the developer community leverage the benefits of the AM3517 processor while leveraging a host of exciting peripherals.
Find out more about Infineon on our Homepage: www.infineon.com/xmc
Find here all information about XMC4000 - Advanced Microcontrollers for Industrial Solutions - 32-bit Microcontroller Family based on ARM® Cortex(tm)-M4 from Infineon Technologies.
The XMC4000 is a family of 32-bit microcontrollers from Infineon based on the ARM Cortex-M4 core. It features powerful peripherals configurable for specific applications, high memory capacities up to 2.5MB flash and 512KB RAM, and a temperature range up to 125°C. The family provides solutions for industrial control with advanced communication and energy efficiency. It includes various models in a portfolio designed for compatibility and reuse across different performance and cost requirements.
Design and Development of Artix-7 FPGAbased Educational BoardIJERA Editor
This paper proposes a new approach that makes it possible for every student to perform experiments of developing and designing a board within limited time available for the course. An educational FPGA board and respective interface are also discussed. The board is a low-cost and high-performance Single Board Computer built around the Xilinx Artix-7 FPGA family XC7Z010 chip. This design provides a hardware implementation and algorithm verification platform for high-speed digital signal processing system.
The document provides information about Embest Info & Tech Co., Ltd., including their product offerings such as development boards, solutions, and design services. Specifically, it introduces several ARM-based boards, MID solutions, HMI solutions, and custom design services. Embest focuses on embedded system technology and provides hardware and software design services covering many processors and operating systems.
The document discusses examining networking devices like hubs, switches, and routers. It describes opening and analyzing different devices to identify components and understand their functions. Understanding the internal components gives insight into how each device works at a general level. Various specific devices are listed, including a Cisco switch and router, for analysis.
The document is a datasheet for the LAN91C111 10/100 Non-PCI Ethernet single chip MAC + PHY. It provides a general description and features of the chip including dual speed 10/100 Mbps Ethernet support, 8KB internal memory buffers, power management features, and support for multiple embedded processor interfaces. The datasheet also includes pin configurations, block diagrams, functional descriptions of the blocks including the clock generator, CSMA/CD, MMU, BIU, MAC-PHY interface, and serial EEPROM interface. It provides ordering information and technical details and specifications.
HWI has broad experience developing embedded firmware and applications software across a wide range of processors and systems, including DSP chips. They have expertise with programming tools for microcontrollers from manufacturers such as Motorola, Texas Instruments, Microchip, Infineon, and Toshiba. HWI also has experience with real-time operating systems, compilers, debuggers, emulators, and other software tools to develop embedded applications from idea to finished product.
Craneboard, from Mistral, is a hardware development platform that enables customers to develop general purpose computing and other applications based on the Sitara AM3517 ARM Cortex - A8 microprocessor device. Craneboard is a low cost, open source reference platform to help the developer community leverage the benefits of the AM3517 processor while leveraging a host of exciting peripherals.
Find out more about Infineon on our Homepage: www.infineon.com/xmc
Find here all information about XMC4000 - Advanced Microcontrollers for Industrial Solutions - 32-bit Microcontroller Family based on ARM® Cortex(tm)-M4 from Infineon Technologies.
The XMC4000 is a family of 32-bit microcontrollers from Infineon based on the ARM Cortex-M4 core. It features powerful peripherals configurable for specific applications, high memory capacities up to 2.5MB flash and 512KB RAM, and a temperature range up to 125°C. The family provides solutions for industrial control with advanced communication and energy efficiency. It includes various models in a portfolio designed for compatibility and reuse across different performance and cost requirements.
Design and Development of Artix-7 FPGAbased Educational BoardIJERA Editor
This paper proposes a new approach that makes it possible for every student to perform experiments of developing and designing a board within limited time available for the course. An educational FPGA board and respective interface are also discussed. The board is a low-cost and high-performance Single Board Computer built around the Xilinx Artix-7 FPGA family XC7Z010 chip. This design provides a hardware implementation and algorithm verification platform for high-speed digital signal processing system.
The document provides information about Embest Info & Tech Co., Ltd., including their product offerings such as development boards, solutions, and design services. Specifically, it introduces several ARM-based boards, MID solutions, HMI solutions, and custom design services. Embest focuses on embedded system technology and provides hardware and software design services covering many processors and operating systems.
The document discusses examining networking devices like hubs, switches, and routers. It describes opening and analyzing different devices to identify components and understand their functions. Understanding the internal components gives insight into how each device works at a general level. Various specific devices are listed, including a Cisco switch and router, for analysis.
The document is a datasheet for the LAN91C111 10/100 Non-PCI Ethernet single chip MAC + PHY. It provides a general description and features of the chip including dual speed 10/100 Mbps Ethernet support, 8KB internal memory buffers, power management features, and support for multiple embedded processor interfaces. The datasheet also includes pin configurations, block diagrams, functional descriptions of the blocks including the clock generator, CSMA/CD, MMU, BIU, MAC-PHY interface, and serial EEPROM interface. It provides ordering information and technical details and specifications.
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog MicroSmart PLC Idec đầy đủ và mới nhất.
Là dòng điều khiển lập trình chất lượng cao với tốc độ xử lý đẳng cấp thế giới. Thân máy nhỏ gọn nhưng chứa các tính năng nổi bật. Mô-đun CPU mỏng với chức năng làm máy chủ web, lý tưởng cho điều khiển từ xa
The document describes Microchip's PIC18F2455/2550/4455/4550 microcontrollers. It provides details on their features such as USB support, peripheral modules, oscillator structure, memory size, and pinout diagrams for various packages. The microcontrollers integrate enhanced flash program memory, SRAM, analog and digital peripherals for general embedded control applications.
A microcontroller is a computer on a single integrated chip that contains a processor, memory, and input/output ports. Common microcontroller families include Intel, Atmel, Microchip, and ARM. Microcontrollers are used in devices like cellphones, toys, appliances, cars, and cameras. The Arduino is a popular open-source hardware and software platform for building prototypes and interactive objects. It uses a simple programming language based on C/C++ and is inexpensive and easy to use.
This document provides an overview of Semitech Innovations and its flagship SIMAC power line communication technology. SIMAC uses existing power lines to transmit data, eliminating the need for additional communications infrastructure. It is well-suited for applications like automatic meter reading, home automation, streetlight control, and traffic light control. Semitech sees significant market potential for SIMAC in these areas by reducing costs, improving efficiency, and giving consumers access to energy usage data in real-time. The document outlines the specifications and features of the SIMAC chip and provides examples of pilot projects demonstrating its capabilities.
This document provides a tour of an Acer Aspire notebook, identifying 15 major external features on the front of the notebook like the screen, keyboard, touchpad, speakers, camera, and buttons; it also lists the functions of the status indicators and easy-launch buttons on the front of the notebook.
The industrial grade 4G wireless router provides high-speed 4G LTE network access for industrial IoT applications through WiFi or network ports. It supports both FDD and TDD 4G LTE standards as well as 2G, 3G, and serial data transmission. The router is widely used for applications such as smart grids, transportation, buildings, and more through its VPN, firewall, QoS, and other network functions.
The document discusses next generation 8-bit microcontrollers from manufacturers like Atmel and Microchip, outlining their advance features such as larger code memory, lower power consumption, and integrated peripherals. It provides an overview of the AVR and PIC architectures as well as the programming skills needed to work with these microcontrollers, including knowledge of languages like C/C++ and debugging techniques. Selection of a microcontroller depends on requirements and manufacturers offer options across memory sizes, peripherals, and price points.
The document discusses hardware requirements for a project, focusing on the Node MCU and related components. It provides an overview of the ESP-12E Wi-Fi module and Node MCU board, describing their features, pinouts, and applications. It also discusses the power supply requirements, including a step-down transformer, rectifier, filter capacitor, and 7805 voltage regulator. Finally, it briefly introduces the DHT-11 temperature and humidity sensor.
This document provides an overview of a teleconference training on the Signa Infinity MRI system with EXCITE technology. It discusses the system components, safety procedures, hardware options, installation, operation, diagnostics, and troubleshooting. Modules cover installation, operation, and troubleshooting/diagnostics. Safety topics include lockout/tagout procedures and magnet safety. Hardware includes the array processor, receiver boards, and driver modules. Diagnostic tools evaluate components like the crosspoint switch and receiver channels.
This document summarizes a presentation about a company that provides telematics services and devices. The company offers:
1) A range of devices called C4 and Dreevo for fleet management, insurance telematics, and driver assistance that run on the Morpheus3 operating system.
2) Cloud and mobile services including a cloud platform called CloudConnect that integrates with telematics devices and provides APIs, live tracking, and data services.
3) An open wireless telematics protocol for optimized data transfer between devices and the cloud platform over cellular networks.
The document provides an overview of the STM32 MCU family from STMicroelectronics. It discusses the key features such as an ARM Cortex-M3 core, Flash memory up to 512KB, SRAM up to 64KB, low power modes, timers, and communication peripherals. It also outlines the applications for industrial equipment, appliances, low power devices, and consumer electronics. Finally, it gives a high-level description of the system architecture and various peripherals including DMA, ADC, DAC, communication interfaces, and watchdogs.
BlackHat 2009 - Hacking Zigbee Chips (slides)Michael Smith
This document discusses a 16-bit rootkit and second generation Zigbee chips. It describes how the rootkit works by proxying a microcontroller's interrupt vector table to gain control of incoming packets. It also examines vulnerabilities in early Zigbee chips like the EM250 and CC2430 that exposed cryptographic keys due to debug interfaces and memory layout issues. Later generations of chips aim to address these security flaws.
1) The document discusses Message Signaled Interrupts (MSI), an improvement over the traditional interrupt handling method. MSI allows interrupt information to be delivered in one step from a device directly to the CPU.
2) MSI was introduced in PCI 2.2 and improved in PCI 3.0 with MSI-X, which supports more interrupts per device. MSI uses a memory write to trigger an interrupt, while traditional interrupts use dedicated pins.
3) The benefits of MSI include faster response, less hardware requirements, guarantee of unique interrupts, and ability to send data with the interrupt. MSI also avoids ordering issues with traditional interrupts.
Service manual-acer-aspire-5710-5710 g-5310-5310gmumbutu
This document provides a service guide for the Acer Aspire 5710/5710G/5310/5310G series laptops. It includes specifications for components like the processor, memory, display, graphics, audio, storage, input devices, communication features, I/O ports, and environment tolerances. Diagrams show the system block and board layout. The guide also outlines the copyright, conventions, and preface information.
FPGA Based IP Core Initialization for Ps2-Vga Peripherals Using Microblaze Pr...IJERA Editor
The MICROBLAZE processor is a soft core microprocessor that is used in FPGA with Xilinx EDK (embedded
development kit) tool. Embedded Development Kit (EDK) is a suite of tools and Intellectual Property (IP) that
enables you to design a complete embedded processor system for implementation in a Xilinx Field
Programmable Gate Array (FPGA) device. Xilinx Platform Studio (XPS) is the development environment used
for designing the hardware portion of your embedded processor system based on MICROBLAZE.
In this paper the ps2-vga peripherals IP cores are initialized and provided an embedded environment under
MICROBLAZE processor using Xilinx Platform Studio (XPS).
GA 5000- High Computing Gambling PC for mulit-playerAEWIN
This document summarizes the key features and specifications of the GA-5000 gaming motherboard. It supports AMD Phenom and Athlon processors on the AM2+ socket, has dual PCI-E x16 slots, integrated graphics with ATI Radeon HD3200, and various security features like TPM and an authenticate chip. It provides multiple COM ports, USB ports, audio capabilities, LAN ports, and expansion slots for gaming and amusement applications. Environmental monitoring and approvals ensure reliable operation.
The DeltaV digital automation system from Emerson helps improve plant operations through predictive technologies in an intuitive interface. The system offers I/O on demand for flexible integration of field devices, ultimate scalability from small to large plants, and embedded intelligent control using advanced control technologies. It is inherently integrated across different applications and functions. The system is built for purpose using a combination of commercial off-the-shelf and custom technologies.
The document describes the PIC16F627A/628A/648A microcontrollers, which are 8-bit flash-based microcontrollers with low power nanoWatt technology. They operate at speeds from DC to 20 MHz and include features such as a RISC CPU, interrupts, analog comparators, timers, I/O pins, and In-Circuit Serial Programming. The microcontrollers also offer low power consumption down to 100 nA in standby mode.
The Codian MCU 4200 Series is a powerful multimedia conferencing bridge that delivers high quality voice and video. It provides up to 40 video ports and 40 additional voice ports. It uses Universal Port technology to maintain full capacity regardless of codec, resolution, or layout. It also supports streaming video, audio, and content to web browsers without additional software. The MCU 4200 Series offers investment protection through compatibility with all major vendors and supports standards-based IP and ISDN networks.
The document discusses several embedded application development platforms including Arduino, Raspberry Pi, Tiva C Series, and MSP430. It provides overview information on each platform, including key components, features, programming languages supported, and examples of applications. For Arduino, it describes the Arduino Uno board in detail. For Raspberry Pi, it outlines the basic specifications and components. For Tiva C Series and MSP430, it summarizes the development boards and features of the microcontrollers.
The Rico Board is an excellent high-performance Single Board Computer using the newest TI’s AM437x Sitara ARM Cortex-A9 based solution. It has 512MB DDR3, 4GB eMMC Flash, 16MB QSPI Flash and 32KB EEPROM on board, featuring various peripherals like Debug Serial, USB, Gigabit Ethernet, Dual-Camera, TF, HDMI, LCD and etc. It is preloaded with Linux and supplied with optional 7-inch LCD Module including capacitive touch screen. More information can be found at MYIR's website: http://www.myirtech.com/list.asp?id=510
Case Study: Porting Qt for Embedded Linux on Embedded Processorsaccount inactive
Qt has been crucial for Texas Instruments to develop attractive applications as system demonstrations including appealing graphics and communication features within a defined time space and resource environment. This session will discuss porting and using Qt for Embedded Linux on several embedded processors. Walzer will present TI's experience and the current status of configuring Qt for ARM based platforms running Linux as the operating system, as well as have a look at the current state of integrating hardware accelerators such as DSP and graphics cores into Qt4.
Presentation by Frank Walzer held during Qt Developer Days 2009.
http://qt.nokia.com/developer/learning/elearning
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog MicroSmart PLC Idec đầy đủ và mới nhất.
Là dòng điều khiển lập trình chất lượng cao với tốc độ xử lý đẳng cấp thế giới. Thân máy nhỏ gọn nhưng chứa các tính năng nổi bật. Mô-đun CPU mỏng với chức năng làm máy chủ web, lý tưởng cho điều khiển từ xa
The document describes Microchip's PIC18F2455/2550/4455/4550 microcontrollers. It provides details on their features such as USB support, peripheral modules, oscillator structure, memory size, and pinout diagrams for various packages. The microcontrollers integrate enhanced flash program memory, SRAM, analog and digital peripherals for general embedded control applications.
A microcontroller is a computer on a single integrated chip that contains a processor, memory, and input/output ports. Common microcontroller families include Intel, Atmel, Microchip, and ARM. Microcontrollers are used in devices like cellphones, toys, appliances, cars, and cameras. The Arduino is a popular open-source hardware and software platform for building prototypes and interactive objects. It uses a simple programming language based on C/C++ and is inexpensive and easy to use.
This document provides an overview of Semitech Innovations and its flagship SIMAC power line communication technology. SIMAC uses existing power lines to transmit data, eliminating the need for additional communications infrastructure. It is well-suited for applications like automatic meter reading, home automation, streetlight control, and traffic light control. Semitech sees significant market potential for SIMAC in these areas by reducing costs, improving efficiency, and giving consumers access to energy usage data in real-time. The document outlines the specifications and features of the SIMAC chip and provides examples of pilot projects demonstrating its capabilities.
This document provides a tour of an Acer Aspire notebook, identifying 15 major external features on the front of the notebook like the screen, keyboard, touchpad, speakers, camera, and buttons; it also lists the functions of the status indicators and easy-launch buttons on the front of the notebook.
The industrial grade 4G wireless router provides high-speed 4G LTE network access for industrial IoT applications through WiFi or network ports. It supports both FDD and TDD 4G LTE standards as well as 2G, 3G, and serial data transmission. The router is widely used for applications such as smart grids, transportation, buildings, and more through its VPN, firewall, QoS, and other network functions.
The document discusses next generation 8-bit microcontrollers from manufacturers like Atmel and Microchip, outlining their advance features such as larger code memory, lower power consumption, and integrated peripherals. It provides an overview of the AVR and PIC architectures as well as the programming skills needed to work with these microcontrollers, including knowledge of languages like C/C++ and debugging techniques. Selection of a microcontroller depends on requirements and manufacturers offer options across memory sizes, peripherals, and price points.
The document discusses hardware requirements for a project, focusing on the Node MCU and related components. It provides an overview of the ESP-12E Wi-Fi module and Node MCU board, describing their features, pinouts, and applications. It also discusses the power supply requirements, including a step-down transformer, rectifier, filter capacitor, and 7805 voltage regulator. Finally, it briefly introduces the DHT-11 temperature and humidity sensor.
This document provides an overview of a teleconference training on the Signa Infinity MRI system with EXCITE technology. It discusses the system components, safety procedures, hardware options, installation, operation, diagnostics, and troubleshooting. Modules cover installation, operation, and troubleshooting/diagnostics. Safety topics include lockout/tagout procedures and magnet safety. Hardware includes the array processor, receiver boards, and driver modules. Diagnostic tools evaluate components like the crosspoint switch and receiver channels.
This document summarizes a presentation about a company that provides telematics services and devices. The company offers:
1) A range of devices called C4 and Dreevo for fleet management, insurance telematics, and driver assistance that run on the Morpheus3 operating system.
2) Cloud and mobile services including a cloud platform called CloudConnect that integrates with telematics devices and provides APIs, live tracking, and data services.
3) An open wireless telematics protocol for optimized data transfer between devices and the cloud platform over cellular networks.
The document provides an overview of the STM32 MCU family from STMicroelectronics. It discusses the key features such as an ARM Cortex-M3 core, Flash memory up to 512KB, SRAM up to 64KB, low power modes, timers, and communication peripherals. It also outlines the applications for industrial equipment, appliances, low power devices, and consumer electronics. Finally, it gives a high-level description of the system architecture and various peripherals including DMA, ADC, DAC, communication interfaces, and watchdogs.
BlackHat 2009 - Hacking Zigbee Chips (slides)Michael Smith
This document discusses a 16-bit rootkit and second generation Zigbee chips. It describes how the rootkit works by proxying a microcontroller's interrupt vector table to gain control of incoming packets. It also examines vulnerabilities in early Zigbee chips like the EM250 and CC2430 that exposed cryptographic keys due to debug interfaces and memory layout issues. Later generations of chips aim to address these security flaws.
1) The document discusses Message Signaled Interrupts (MSI), an improvement over the traditional interrupt handling method. MSI allows interrupt information to be delivered in one step from a device directly to the CPU.
2) MSI was introduced in PCI 2.2 and improved in PCI 3.0 with MSI-X, which supports more interrupts per device. MSI uses a memory write to trigger an interrupt, while traditional interrupts use dedicated pins.
3) The benefits of MSI include faster response, less hardware requirements, guarantee of unique interrupts, and ability to send data with the interrupt. MSI also avoids ordering issues with traditional interrupts.
Service manual-acer-aspire-5710-5710 g-5310-5310gmumbutu
This document provides a service guide for the Acer Aspire 5710/5710G/5310/5310G series laptops. It includes specifications for components like the processor, memory, display, graphics, audio, storage, input devices, communication features, I/O ports, and environment tolerances. Diagrams show the system block and board layout. The guide also outlines the copyright, conventions, and preface information.
FPGA Based IP Core Initialization for Ps2-Vga Peripherals Using Microblaze Pr...IJERA Editor
The MICROBLAZE processor is a soft core microprocessor that is used in FPGA with Xilinx EDK (embedded
development kit) tool. Embedded Development Kit (EDK) is a suite of tools and Intellectual Property (IP) that
enables you to design a complete embedded processor system for implementation in a Xilinx Field
Programmable Gate Array (FPGA) device. Xilinx Platform Studio (XPS) is the development environment used
for designing the hardware portion of your embedded processor system based on MICROBLAZE.
In this paper the ps2-vga peripherals IP cores are initialized and provided an embedded environment under
MICROBLAZE processor using Xilinx Platform Studio (XPS).
GA 5000- High Computing Gambling PC for mulit-playerAEWIN
This document summarizes the key features and specifications of the GA-5000 gaming motherboard. It supports AMD Phenom and Athlon processors on the AM2+ socket, has dual PCI-E x16 slots, integrated graphics with ATI Radeon HD3200, and various security features like TPM and an authenticate chip. It provides multiple COM ports, USB ports, audio capabilities, LAN ports, and expansion slots for gaming and amusement applications. Environmental monitoring and approvals ensure reliable operation.
The DeltaV digital automation system from Emerson helps improve plant operations through predictive technologies in an intuitive interface. The system offers I/O on demand for flexible integration of field devices, ultimate scalability from small to large plants, and embedded intelligent control using advanced control technologies. It is inherently integrated across different applications and functions. The system is built for purpose using a combination of commercial off-the-shelf and custom technologies.
The document describes the PIC16F627A/628A/648A microcontrollers, which are 8-bit flash-based microcontrollers with low power nanoWatt technology. They operate at speeds from DC to 20 MHz and include features such as a RISC CPU, interrupts, analog comparators, timers, I/O pins, and In-Circuit Serial Programming. The microcontrollers also offer low power consumption down to 100 nA in standby mode.
The Codian MCU 4200 Series is a powerful multimedia conferencing bridge that delivers high quality voice and video. It provides up to 40 video ports and 40 additional voice ports. It uses Universal Port technology to maintain full capacity regardless of codec, resolution, or layout. It also supports streaming video, audio, and content to web browsers without additional software. The MCU 4200 Series offers investment protection through compatibility with all major vendors and supports standards-based IP and ISDN networks.
The document discusses several embedded application development platforms including Arduino, Raspberry Pi, Tiva C Series, and MSP430. It provides overview information on each platform, including key components, features, programming languages supported, and examples of applications. For Arduino, it describes the Arduino Uno board in detail. For Raspberry Pi, it outlines the basic specifications and components. For Tiva C Series and MSP430, it summarizes the development boards and features of the microcontrollers.
The Rico Board is an excellent high-performance Single Board Computer using the newest TI’s AM437x Sitara ARM Cortex-A9 based solution. It has 512MB DDR3, 4GB eMMC Flash, 16MB QSPI Flash and 32KB EEPROM on board, featuring various peripherals like Debug Serial, USB, Gigabit Ethernet, Dual-Camera, TF, HDMI, LCD and etc. It is preloaded with Linux and supplied with optional 7-inch LCD Module including capacitive touch screen. More information can be found at MYIR's website: http://www.myirtech.com/list.asp?id=510
Case Study: Porting Qt for Embedded Linux on Embedded Processorsaccount inactive
Qt has been crucial for Texas Instruments to develop attractive applications as system demonstrations including appealing graphics and communication features within a defined time space and resource environment. This session will discuss porting and using Qt for Embedded Linux on several embedded processors. Walzer will present TI's experience and the current status of configuring Qt for ARM based platforms running Linux as the operating system, as well as have a look at the current state of integrating hardware accelerators such as DSP and graphics cores into Qt4.
Presentation by Frank Walzer held during Qt Developer Days 2009.
http://qt.nokia.com/developer/learning/elearning
AXONIM Devices offers services of embedded systems development. Highly skilled engineering teams perform whole development projects starting from scratch suggested by our customer and future devices architecture, functional and structural models design.
Having strong background in embedded systems design our developers execute all required tasks within development cycle: circuit design, design of PCB, firmware development and design, FPGA, porting and adapting operating systems on a given platform, BSP and driver development, application development, and operator interface or user application development, digital signal processing, algorithms design, prototyping, manufacture support.
SBC6020 SAM9G20 based Single Board Computeryclinda666
The Embest SBC6020 Single Board Computer is based on the 400MHz Atmel AT91SAM9G20 ARM926EJ-STM microcontroller. It has interfaces like 7 serial ports, 2 Ethernet ports, USB, CAN, CF card slot, and ADC. It runs the Linux 2.6.30 operating system and is ready to use for embedded applications.
The document provides an overview of current trends in embedded systems. It defines embedded systems as computing systems used in electronic devices for specific purposes other than desktop PCs. The document notes that embedded systems make up 99% of all processors used and discusses their characteristics like single function, real-time performance, limited resources and safety critical applications. It also covers the microcontroller market trends over time from the 1970s to present day and popular microcontroller families like 8051, ARM, PIC and AVR. Development tools and programming languages for embedded systems are discussed as well as commonly used real-time operating systems.
AXONIM Devices - expert in design and development of the embedded electronics on RTOS, complex/single board computers, digital signal processing algorithms, electronics processor devices, PCBA, digital circuits, hardware, firmware development, enterprise hardware & software solutions, distributing systems.
Electronic embedded systems development, electronic devices design, algorithms and software are the main areas of activity of the AXONIM.
The development process starts with an assessment of the customer's technical requirements of the project that is done by our expert group, if required they perform research and write technical specification, then project team prepares working project plan.
The immediate development of a technical system - device, embedded electronic system, or electronic module consists of the design of the hardware platform, software development, device body design, further prototyping - manufacturing of prototypes and the subsequent technical support throughout the life cycle of the device.
Our competences include, but are not limited with the following types of engineering tasks: algorithms for digital signal processing (filtering, processing of audio and video streams, encoding / decoding, compression / decompression), data collection systems, electronic optical devices, porting BSP embedded OS (Windows Embedded, Linux, Android, eCos, freeRTOS) and others. The result of our service is a full-featured prototype device and a set of design documentation, which allows to start production of the final product.
The MYS-8MMX Single Board Computer has a compact design with only 95mm by 65mm form factor. It is powered by NXP’s first embedded multicore applications processor i.MX 8M Mini which features up to 1.8GHz quad-core ARM Cortex-A53 plus 400MHz Cortex-M4 processor. The tiny board takes full features of the processor and is equipped with 2GB DDR4, 8GB eMMC and 32MB QSPI Flash. It has explored rich peripheral interfaces through headers and connectors including two USB 2.0 Host, one USB OTG, one Gigabit Ethernet, TF card, M.2 interface, LVDS LCD interface, MIPI CSI interface, HDMI output, IO expansion interface and more others. The AP6256 WiFi/BT module on the board also allows wireless communications with other devices. It is capable of running Linux operating system based on the Yocto 3.0 or Ubuntu 18.04 .
The document provides a summary of a job applicant's career experience and qualifications. It outlines their objective of seeking a senior hardware engineering role, education as an electronics and communications graduate with 5.5 years of experience in defense, aerospace and medical industries. It details technical skills in circuit design, debugging tools, and programming languages. It also lists work experience at various companies and highlights roles and responsibilities on several hardware design projects involving medical devices, processors, DSPs and networking modules.
Pactron is an electronics manufacturing services provider that offers end-to-end design and manufacturing services. They have expertise in board-level design, engineering, and manufacturing. Pactron can compress time to market for customers through their integrated approach from design to manufacturing. They have experience serving industries such as semiconductor, medical devices, telecom, aerospace, and defense.
The Rear-transition Module – Break-out Card (RTM-BOC)
from Mistral is an eight layer plug-in module. In addition, the RTM BOC contains four Gigabit Ethernet ports with PHY to support the SGMII lanes on the RTM connector.
The document discusses embedded operating systems and Linux as an option. It provides an overview of embedded operating systems, real-time operating systems, key players in the embedded OS market, commercial and open source Linux distributions for embedded systems, hardware platforms, development tools, applications, and the growth of Linux in the embedded market.
The RZ/G1E SMARC module developed by Mistral is a small form-factor, high performance module built around the 1GHz Renesas RZ/G1E dual ARM Cortex-A7
microprocessor (MPU).
Ti k2 e for mission critical applicationsHitesh Jani
The document discusses the TI-K2E for mission critical applications. It introduces the Keystone II family of processors, specifically the 66AK2Ex and AM5K2Ex variants. These variants provide powerful ARM and DSP cores, high performance at low power, security and reliability features. Example application areas discussed include aerospace, medical, and industrial automation. Specific use cases in areas like medical robotics and industrial imaging are also described.
Building Industrial IoT Gateway using ARM SBCVasu Dev
This document discusses industrial IoT gateways and embedded systems. It provides an overview of PHYTEC's products and services for building IoT gateways. These include system on modules with various ARM processors, single board computers, and development services. It also discusses different types of IoT gateways based on the microcontroller, microprocessor, or system on chip used. Various operating systems, hardware interfaces, and wireless connectivity options are outlined. Potential applications mentioned include industrial automation, healthcare, transportation, and smart agriculture.
Webinar: NVIDIA JETSON – A Inteligência Artificial na palma de sua mãoEmbarcados
Objetivo do Webinar: Venha saber como a plataforma NVIDIA Jetson e suas ferramentas habilitam você a desenvolver e implantar robôs, drones, aplicativos de IVA e outras máquinas autônomas com tecnologia AI que pensam por conta própria.
Apoio: Arrow e NVIDIA.
Convidado: Marcel Saraiva
Gerente de Contas Enterprise da NVIDIA, executivo com 20 anos de expereincia no mercado de TI, teve na sua carreia passagens pela SGI (Silicon Graphics), Intel e Scansource. Engenheiro eletrico formado pela FEI, com pós-graduação em Marketing pela FAAP e MBA em Gestão Empresarial pela FGV.
Link para o Webinar: https://www.embarcados.com.br/webinars/nvidia-jetson-a-inteligencia-artificial-na-palma-de-sua-mao/
How to Select Hardware for Internet of Things Systems?Hannes Tschofenig
With the increasing commercial interest in Internet of Things (IoT) the question about a reasonable hardware configuration surfaces again and again.
Peter Aldworth, a hardware engineer with more than 19 years of experience, discusses this topic in a presentation given to the IETF community.
Aspire provides embedded product engineering design and manufacturing services. It has over 300 customers and has developed over 1000 products. It focuses on hardware design, embedded software development, and offers services across various industries like automotive, consumer electronics, and networking. It has capabilities in areas like board design, firmware development, testing, and certification.
This document provides a product catalog for WM Systems LLC's industrial IoT routers, gateways, and data concentrators. It describes several different models of routers and data concentrators that offer cellular and Ethernet connectivity, data acquisition capabilities through protocols like Modbus and MBus, and secure remote management software. The devices are designed for industrial applications like smart grids, factory automation, and fleet management.
The document provides information on various DSP companies and their products. It discusses Analog Devices' ADSP-218xN and EZ-KIT Lite evaluation boards, as well as its ADSP-2191, ADSP-21535, ADSP-BF561, ADSP 21mod980, ADSP-TS201/202/203, and ADSP-TS201S processors. It also summarizes Texas Instruments' OMAP1510 application processor and TMS320C54CST client-side telephony DSP, among other TI products. Hitachi Semiconductor of America's SH7727 microprocessor is also mentioned. The document concludes with information on DSP products from various other companies.
EdgeQ provides a unified 5G platform spanning infrastructure, enterprise/telco, and automotive applications. The platform includes a RISC-V based system-on-a-chip with integrated 4G/5G PHY layer 1 software implemented as customizable libraries. It also includes a turnkey L2/L3 interface compliant with nFAPI standards and partners for additional L2/L3 software stacks. The chip features an 8-core ARM CPU cluster, specialized baseband processor, signal processing complex, and acceleration engines to provide a fully programmable and integrated 5G, AI, and networking solution.
7. Shresta eTechnologies Pvt Ltd, - Innovate-Integrate-Implement
VPX (VITA 46) System
1 High Performance 3U VPX Rugged PC
2 3U VPX PowerPC SBC
RF Tuners
1 Wideband Microwave Tuner
2 Tuners and Upconverters
3 24-48-Channel Digital Downconverters with Integrated Analog Input
4 Low Phase Noise AD Clock Generator
5 Wideband, Virtex-4-Based Digital Receivers
6 Wideband Remote Fiber Transceiver
Industrial & Embedded PC
1 Embedded Computer System
2 Industrial Chassis
3 Industrial Workstation
4 Backplane
5 Peripheral & Power Supply
6 MicroTCA Chassis
7 Industrial PC - Rackmount
8 Embedded Box PCs
9 Embedded IPC - ThinkIO
10 Rugged GETAC Notebooks and Laptops
11 Kiosks
12 Sensor Stream Computing Platform
13 Dual Cell Based Blade 2 Systems
Page 7 of 10
8. Shresta eTechnologies Pvt Ltd, - Innovate-Integrate-Implement
Rugged PCs and Laptops
1 RuggedPad
2 Rugged Portable PC
3 Rugged Micro PC
4 Rugged Rackmount Computer
5 Rugged Monitor
Data Acquisition and Control
1 Data Acquisition Boards
* PC104 bus
* PCI bus
* 104plus bus
* CPCI bus
* USB bus
* PCIe bus (coming soon)
2 Data Acquisition Modules
* Protocol converting module
* 485 bus module
* Ethernet bus module
Page 8 of 10
9. Shresta eTechnologies Pvt Ltd, - Innovate-Integrate-Implement
Industrial Storage Solution
1 Micro Disk Module (MDM)
2 Serial-ATA Module (SATA)
3 Compact Flash Card (CF)
4 PCI Express Card
5 Industrial USB Disk
6 PCMCIA-ATA Card
7 Solid State Disk (SSD)
8 IDE Flash Disk 2.5inch
9 IDE Flash Disk 1.8inch
10 SATA Flash Disk 2.5inch
11 SATA Flash Disk 1.8inch
Display and Signage Products
Digital Signage
1 Digital Signage Player
2 Software - Content and Device Management
3 Wide Screen All-in One Multimedia PC for Digital Signage
Personalized Content delivery on connected devices and Information
4
Appliances
5 Signage on Digital Wireless Photoframes
Thin Client and POS Terminal
1 Mobile Tablet POS
2 Rugged Handheld POS Solution
3 Thin Client/ Embedded Systems
Page 9 of 10
10. Shresta eTechnologies Pvt Ltd, - Innovate-Integrate-Implement
Display Solution
1 56' ULTRA High Resolution All-in-One LCD with Integrated PC
2 19" to 57" All-in-One LCD/PC
3 Vehicle/ Fixed-mount Computer
4 Integrated LCD Systems
5 Industrial IR Touch Monitor
6 Digital Whiteboard / Multimedia Whiteboard
7 19" to 57" Touch Screens
8 IP65 Grade LCD PC
9 Interactive Whiteboards (Touch Driven / Pen Driven)
10 Interactive Pen Display
11 Wireless Tablet
LED Display Solution
1 Exhibition & Entertainment (E&E)
2 Commercial & Advertisement (C&A)
3 Professional Sports Display (PSD)
4 Custom Design
5 LED Video Walls
6 Digital Billboards
Mobile Signage Solution
1 Bluetooth / Wi-Fi Access Point for distribution of multimedia content
Interactive touch screen that allows the distribution of several
2
multimedia contents to mobile phones via Bluetooth® and Wi-Fi.
3 Software for mobile marketing campaigns
4 Web to Mobile software
Page 10 of 10