Aircraft Structure Presentation.pptx
•Download as PPTX, PDF•
0 likes•101 views
The document discusses the construction of the Airbus A380 aircraft. It describes that the A380 uses a combination of materials for its structure, including 61% aluminum alloys, 22% composites, 10% titanium and steel, and 3% fiber metal laminate. It provides details on the fuselage, wings, and landing gear of the A380. The fuselage is made of composite materials and has a length of 73 meters. The wings have a span of 79.8 meters and use carbon fiber composite for the central wing box. The A380's landing gear system contains a total of 22 wheels to support the large aircraft.
Report
Share
Report
Share
Recommended
Raj
The Airbus A380 is a double-deck, four-engine airliner developed by Airbus. It is the world's largest passenger airliner, with over 600 square meters of cabin space and seating for up to 853 passengers. The A380 development began in 2000 to fill a market need for a large ultra-high-capacity airliner. It conducted its maiden flight in 2005 and entered commercial service in 2007. The A380 has received orders from several major airlines due to its increased passenger and cargo capacity compared to other large airliners.
Structural Weight Optimization of Aircraft Wing Component Using FEM Approach.
One of the main challenges for the civil aviation industry is the reduction of its environmental impact by better fuel efficiency by virtue of Structural optimization. Over the past years, improvements in performance and fuel efficiency have been achieved by simplifying the design of the structural components and usage of composite materials to reduce the overall weight of the structure. This paper deals with the weight optimization of transport aircraft with low wing configuration. The Linear static and Normal Mode analysis were carried out using MSc Nastran & Msc Patran under different pressure conditions and the results were verified with the help of classical approach. The Stress and displacement results were found and verified and hence arrived to the conclusion about the optimization of the wing structure.
Ppt on aviation
The document discusses two Airbus aircraft - the A300 and A380. The A300 was launched in 1972 as the first twin-engined widebody aircraft and had a passenger capacity of 250-300. The A380 was introduced in 2005 and is a double-deck four-engine airliner that can carry up to 853 people, providing 50% more floor space than other large airliners. Safety equipment on the aircraft includes life vests, oxygen masks, and fire extinguishers on the A300 and asbestos gloves, smoke goggles, and megaphones on the A380.
Article JEC magazine- carbon fabrics help e-go aircraft to save 53% on weight
- UK aircraft manufacturer e-Go is launching a Single Seat De-Regulated aircraft and needed to reduce weight to meet requirements.
- They used Spread Tow carbon fabrics, which helped save 53% on weight compared to conventional carbon fiber reinforcements on certain parts.
- The low areal weight of the carbon fiber reinforcements, including TeXtreme Spread Tow fabrics, allowed for an optimized lightweight design while meeting structural requirements of the aircraft.
frankfinn Aviation Merit & Disctinction ppt by TAHER SALIM (INDORE)
The document provides information about Frankfinn Institute Of Airhostess Training and a student's research project on the current aviation industry scenario. It discusses sources used like the aviation faculty, newspapers, magazines and the internet. It describes Airbus aircraft models from A300 to A380 and their features. It highlights the growth prospects of the Indian aviation sector and ongoing trends. The student gains knowledge about the industry through this research project.
Airbus a380 details 9939393
The Airbus A380 is the world's largest passenger airliner. It has a double-deck design with space for over 500 passengers. The upper deck extends the entire length of the aircraft. Airbus began developing the A380 in 2000 to compete with the Boeing 747. Major structural sections are built across Europe and assembled in France. The A380 completed its first flight in 2005 and entered commercial service with Singapore Airlines in 2007. Several airlines now use the A380, with Emirates having the most on order.
Static and Dynamic Analysis of Floor Beam (Cross beam) of Aircraft
This document summarizes a study analyzing the static and dynamic behavior of floor beams used in aircraft. Floor beams experience bending stresses and support the weight of the aircraft. The researchers modeled a floor beam in CATIA and analyzed it in ANSYS to study stresses under different loads. They also analyzed a carbon fiber reinforced plastic floor beam. Modal analysis determined the beam's natural frequencies under vibration to ensure it can withstand operating conditions. The study aims to optimize floor beam design and materials to reduce weight while maintaining strength.
IRJET- Static and Fracture Analysis for Aircraft Fuselage and Wing Joint with...
This document discusses static and fracture analysis of aircraft fuselage and wing joints using composite materials. Finite element analysis software ANSYS and a post-processing program called 3MBSIF are used to determine stress intensity factors for cracks in longitudinal and circumferential fuselage joints under internal pressure loading. Residual strength is predicted using strain energy density theory of fracture. Fatigue life is represented using the Goodman curve. The structural component is designed and analyzed in CREO and ANSYS to calculate stresses and determine fatigue life for different loading conditions.
Recommended
Raj
The Airbus A380 is a double-deck, four-engine airliner developed by Airbus. It is the world's largest passenger airliner, with over 600 square meters of cabin space and seating for up to 853 passengers. The A380 development began in 2000 to fill a market need for a large ultra-high-capacity airliner. It conducted its maiden flight in 2005 and entered commercial service in 2007. The A380 has received orders from several major airlines due to its increased passenger and cargo capacity compared to other large airliners.
Structural Weight Optimization of Aircraft Wing Component Using FEM Approach.
One of the main challenges for the civil aviation industry is the reduction of its environmental impact by better fuel efficiency by virtue of Structural optimization. Over the past years, improvements in performance and fuel efficiency have been achieved by simplifying the design of the structural components and usage of composite materials to reduce the overall weight of the structure. This paper deals with the weight optimization of transport aircraft with low wing configuration. The Linear static and Normal Mode analysis were carried out using MSc Nastran & Msc Patran under different pressure conditions and the results were verified with the help of classical approach. The Stress and displacement results were found and verified and hence arrived to the conclusion about the optimization of the wing structure.
Ppt on aviation
The document discusses two Airbus aircraft - the A300 and A380. The A300 was launched in 1972 as the first twin-engined widebody aircraft and had a passenger capacity of 250-300. The A380 was introduced in 2005 and is a double-deck four-engine airliner that can carry up to 853 people, providing 50% more floor space than other large airliners. Safety equipment on the aircraft includes life vests, oxygen masks, and fire extinguishers on the A300 and asbestos gloves, smoke goggles, and megaphones on the A380.
Article JEC magazine- carbon fabrics help e-go aircraft to save 53% on weight
- UK aircraft manufacturer e-Go is launching a Single Seat De-Regulated aircraft and needed to reduce weight to meet requirements.
- They used Spread Tow carbon fabrics, which helped save 53% on weight compared to conventional carbon fiber reinforcements on certain parts.
- The low areal weight of the carbon fiber reinforcements, including TeXtreme Spread Tow fabrics, allowed for an optimized lightweight design while meeting structural requirements of the aircraft.
frankfinn Aviation Merit & Disctinction ppt by TAHER SALIM (INDORE)
The document provides information about Frankfinn Institute Of Airhostess Training and a student's research project on the current aviation industry scenario. It discusses sources used like the aviation faculty, newspapers, magazines and the internet. It describes Airbus aircraft models from A300 to A380 and their features. It highlights the growth prospects of the Indian aviation sector and ongoing trends. The student gains knowledge about the industry through this research project.
Airbus a380 details 9939393
The Airbus A380 is the world's largest passenger airliner. It has a double-deck design with space for over 500 passengers. The upper deck extends the entire length of the aircraft. Airbus began developing the A380 in 2000 to compete with the Boeing 747. Major structural sections are built across Europe and assembled in France. The A380 completed its first flight in 2005 and entered commercial service with Singapore Airlines in 2007. Several airlines now use the A380, with Emirates having the most on order.
Static and Dynamic Analysis of Floor Beam (Cross beam) of Aircraft
This document summarizes a study analyzing the static and dynamic behavior of floor beams used in aircraft. Floor beams experience bending stresses and support the weight of the aircraft. The researchers modeled a floor beam in CATIA and analyzed it in ANSYS to study stresses under different loads. They also analyzed a carbon fiber reinforced plastic floor beam. Modal analysis determined the beam's natural frequencies under vibration to ensure it can withstand operating conditions. The study aims to optimize floor beam design and materials to reduce weight while maintaining strength.
IRJET- Static and Fracture Analysis for Aircraft Fuselage and Wing Joint with...
This document discusses static and fracture analysis of aircraft fuselage and wing joints using composite materials. Finite element analysis software ANSYS and a post-processing program called 3MBSIF are used to determine stress intensity factors for cracks in longitudinal and circumferential fuselage joints under internal pressure loading. Residual strength is predicted using strain energy density theory of fracture. Fatigue life is represented using the Goodman curve. The structural component is designed and analyzed in CREO and ANSYS to calculate stresses and determine fatigue life for different loading conditions.
Ab 321 dimensions
The document provides specifications for the Airbus A321 aircraft. It describes the A321 as the largest member of the A320 family, which can carry 185 passengers in a two-class configuration or up to 220 passengers. Key dimensions listed include an overall length of 146 feet, maximum take-off weight of 197.1 tons, and maximum range of 3,200 nautical miles with Sharklet wingtip devices. Performance specifications and engine options are also provided.
Materials for aircrafts a market study
A look into historical evolution of materials used for aircraft manufacturing by 5 aircraft manufacturers with consideration to material selection aspects of it.
cv
Neil Brodie has over 30 years of experience in the aircraft industry as a manufacturing engineer, designer, and technician. He has extensive experience designing aircraft structures, systems, electrical, and interiors using CAD systems like CATIA. Recent roles include senior design engineer positions at Airbus developing the A350 wing flaps and fuel systems. He has also held design roles on projects like the A380, A400M, Eurofighter, and Embraer aircraft.
Structural idealisation 1-2019
Structural idealisation of aircraft structures with finite element analysis validation of the hand calculation for the idealised structure.
Structural idealisation.pptx
This document discusses the structural idealization of aircraft wings for stress analysis purposes. It begins by describing the various structural components of a wing, including spars, ribs, skins, and stringers. It then explains that real wing structures are complex, so they must be simplified for analysis by idealizing them as direct stress-carrying booms and shear stress-carrying panels. The document provides examples of constructing idealized wing box sections and calculating the areas of stress-carrying booms based on equilibrium of bending stresses. It also discusses modeling idealized wing structures in a global finite element model using bar and shell elements.
ATDA Commercial Transport Airframe Part 2.pdf
This document provides an overview of Mr. Geoffrey Allen Wardle's airframe design study from 2012-2020 for the ATDA aircraft. It discusses the selection of the wing planform and aerofoil geometry for the ATDA, including parameters like aspect ratio, sweep angle, taper ratio, and thickness-to-chord ratio. It also outlines the process used to determine values for the mean aerodynamic chord length, wing area, root and tip chords, aerodynamic center, and center of gravity.
Presentation the history of aircraft
The document summarizes the history of Boeing and Airbus, describes several of their aircraft models, and analyzes the trend from aluminum to composite structures on the Boeing 787 and Airbus 380. It notes that Boeing established in 1916 and produced aircraft like the B-17 and B-29 during World War II. Airbus was established in 1970. The document then describes zones of aircraft structures and the materials typically used, including aluminum, composites, and corrosion treatment methods. It provides examples of accidents investigated by Boeing and analyzes Airbus' manufacturing process and composite usage on the A380.
Design your flight 2013 guru gobind singh indraprastha university-team leo (2)
The document summarizes the design process for an aircraft. It describes how various design options were analyzed using software before selecting a monoplane design with a NACA 2417 airfoil made of balsa wood. Prototypes were constructed and tested before the final manufacturing process. Electrical components like motors and batteries were chosen based on calculations. Diagrams show the aircraft design, manufacturing steps, and analysis of components like the wings and landing gear to ensure the design meets requirements.
Aircraft Design Project 1
This document is an aircraft design project report for a twin engine business jet. It includes dimensions, weight configurations, and performance parameters for 20 existing medium business jets analyzed to determine ideal specifications for the new design. Weight estimation was conducted and various design elements were researched and selected, including a cantilever low wing with tapered airfoils. Performance calculations and graphs were included to analyze the 17-seater twin turbofan jet, which will have a maximum speed of 750mph. The report concludes with future work plans and references.
The Airbus A-310
The Airbus A-310 was developed as a shorter-fuselage version of the A-300 to allow it to operate on routes with lower passenger capacity needs. It featured a 12-frame shorter fuselage than the A-300 for 245 passengers. The wing design was modified from the A-300 with a smaller span and area, reducing weight by over 3 tons. Initial orders came from launch customers Lufthansa, Swissair, and KLM who were interested in its shorter range capabilities and lower operating costs relative to larger aircraft.
ATDA Commecial Transport Airframe Part 1.pdf
This is Part 1 of work for my Advanced Technology Demonstration Aircraft project, to inspire interest in aerospace engineering for the RAeS and AIAA.
Group Project Final
This document provides an overview of a group project on the Boeing 737-800 aircraft. The group members are listed and the due date is January 21, 2016. The report contains details on the history, design, and aspects of the 737-800, including mass and center of gravity, engines, fuselage, undercarriage, wings, and tail. Simulations were conducted using a flight simulator to analyze changes made to aspects like wing dihedral angle and sweep. It was concluded that the ideal wing dihedral is 60 degrees and the current wing sweep of 25.02 degrees is sufficient, though a higher sweep could allow for higher speeds.
Light combact aircraft tejas tms
The document summarizes the Light Combat Aircraft Tejas, India's indigenous fourth-generation fighter aircraft. It describes the Tejas as a tailless delta wing aircraft developed as part of India's Light Combat Aircraft program to replace aging MiG-21 fighters. Key aspects summarized include the Tejas' design prioritizing light weight and high maneuverability, its composite material airframe, advanced avionics and systems developed domestically, and use of an American GE engine providing supersonic speed and long range.
Airbusa3 Xx, P F Case Final
The document summarizes information about the Airbus A380 aircraft:
1. The A380 is a double-deck airliner manufactured by Airbus that can carry 555 passengers. It has the largest cabin space and passenger capacity of any commercial airliner.
2. Key features include its twin-deck design, spacious cabins on the upper and lower decks, and three class configurations for seating.
3. Compared to the Boeing 747, the A380 has more seats, larger windows, more headroom, and wider seats that provide more space per passenger.
Strategic Management - Airbus A-380
The document provides information about the Airbus A380 aircraft, including its key specifications and features. It summarizes that the A380 is a double-deck, four-engine airliner manufactured by Airbus that can carry 555 passengers in standard configuration. Some of its key aspects include its large 79.8 meter wingspan, 73 meter length, 24.1 meter height and maximum takeoff weight of over 1.2 million pounds. It has a longer range than the Boeing 747 and provides passengers with more space and amenities due to its double-deck design. The arrival of the A380 in India made aviation history as it landed at the New Delhi airport despite runway width limitations.
Airbus A380
The Airbus A380 is a double-deck airliner manufactured by Airbus that can carry 555 passengers. It has a maximum speed of Mach 0.88 and a maximum altitude of 43,000 feet. The A380 provides 50% more floor space than other airliners and has a lower operating cost per seat than the Boeing 747.
Blended Wing Body (BWB) - Future Of Aviation
What is Blended Wing Body, History, Advantages And Disadvantages, Design and Structure, How airplanes Fly, Conventional airplanes vs. BWB, Future Scope And Challenges.
Blended Wing Body (BWB) - Future Of Aviation
What Is Blended Wing Body, History of BWB, How Airplanes Fly, Aircraft Control Surfaces, Design and Structure of BWB, Advantages and Disadvantages, Conventional aircraft vs. BWB, Future Scope and Challenges
737
The document provides airplane characteristics data for the Boeing 737 family of airplanes to assist with airport planning. It describes the various 737 models, including their lengths, engines, interior configurations, and optional equipment. The 737 models range from the 737-100 to the 737-900ER. The document is intended to help airport planners, airlines, engineers, and other aviation organizations with facility design and operations involving 737 airplanes.
At a glance COMPOSITE INDUSTRIE repair presentation Vers 8 26-1-2017
This document provides an overview of Composite Industrie, an MRO service centre that specializes in composite repairs for aircraft structures and engines. It summarizes Composite Industrie's main customers which include over 100 airlines and MRO centres globally. It also lists Composite Industrie's quality certifications and capabilities including equipment, facilities for composite repairs, engineering services, and capabilities to repair aircraft structures like radomes, nacelles, flight controls and composites on engines.
Pro.pptx
The document discusses the Cessna 425 aircraft, including its specifications and construction. It provides details on the aircraft's dimensions, capacity, weight, engine, and performance specifications. It also describes the aerodynamics of propellers, explaining that thrust results from propeller shape and angle of attack, and is equal to the mass of air handled multiplied by the difference between slipstream velocity and aircraft velocity. Finally, it explains the working principle of a propeller governor, which adjusts propeller pitch to keep the engine speed constant during climbs and dives.
Turbocharging of the Piston Engine.pdf
The document discusses turbocharging of piston engines. It provides a brief history of the turbocharger, invented in 1905. A turbocharger uses the engine's exhaust gases to drive a turbine which spins an air compressor, forcing more air into the combustion chamber and allowing the engine to produce more power. It describes the key parts of a turbocharger and how it works to increase air density and engine power. Advantages include improved fuel efficiency and power, while disadvantages include increased noise and cost.
More Related Content
Similar to Aircraft Structure Presentation.pptx
Ab 321 dimensions
The document provides specifications for the Airbus A321 aircraft. It describes the A321 as the largest member of the A320 family, which can carry 185 passengers in a two-class configuration or up to 220 passengers. Key dimensions listed include an overall length of 146 feet, maximum take-off weight of 197.1 tons, and maximum range of 3,200 nautical miles with Sharklet wingtip devices. Performance specifications and engine options are also provided.
Materials for aircrafts a market study
A look into historical evolution of materials used for aircraft manufacturing by 5 aircraft manufacturers with consideration to material selection aspects of it.
cv
Neil Brodie has over 30 years of experience in the aircraft industry as a manufacturing engineer, designer, and technician. He has extensive experience designing aircraft structures, systems, electrical, and interiors using CAD systems like CATIA. Recent roles include senior design engineer positions at Airbus developing the A350 wing flaps and fuel systems. He has also held design roles on projects like the A380, A400M, Eurofighter, and Embraer aircraft.
Structural idealisation 1-2019
Structural idealisation of aircraft structures with finite element analysis validation of the hand calculation for the idealised structure.
Structural idealisation.pptx
This document discusses the structural idealization of aircraft wings for stress analysis purposes. It begins by describing the various structural components of a wing, including spars, ribs, skins, and stringers. It then explains that real wing structures are complex, so they must be simplified for analysis by idealizing them as direct stress-carrying booms and shear stress-carrying panels. The document provides examples of constructing idealized wing box sections and calculating the areas of stress-carrying booms based on equilibrium of bending stresses. It also discusses modeling idealized wing structures in a global finite element model using bar and shell elements.
ATDA Commercial Transport Airframe Part 2.pdf
This document provides an overview of Mr. Geoffrey Allen Wardle's airframe design study from 2012-2020 for the ATDA aircraft. It discusses the selection of the wing planform and aerofoil geometry for the ATDA, including parameters like aspect ratio, sweep angle, taper ratio, and thickness-to-chord ratio. It also outlines the process used to determine values for the mean aerodynamic chord length, wing area, root and tip chords, aerodynamic center, and center of gravity.
Presentation the history of aircraft
The document summarizes the history of Boeing and Airbus, describes several of their aircraft models, and analyzes the trend from aluminum to composite structures on the Boeing 787 and Airbus 380. It notes that Boeing established in 1916 and produced aircraft like the B-17 and B-29 during World War II. Airbus was established in 1970. The document then describes zones of aircraft structures and the materials typically used, including aluminum, composites, and corrosion treatment methods. It provides examples of accidents investigated by Boeing and analyzes Airbus' manufacturing process and composite usage on the A380.
Design your flight 2013 guru gobind singh indraprastha university-team leo (2)
The document summarizes the design process for an aircraft. It describes how various design options were analyzed using software before selecting a monoplane design with a NACA 2417 airfoil made of balsa wood. Prototypes were constructed and tested before the final manufacturing process. Electrical components like motors and batteries were chosen based on calculations. Diagrams show the aircraft design, manufacturing steps, and analysis of components like the wings and landing gear to ensure the design meets requirements.
Aircraft Design Project 1
This document is an aircraft design project report for a twin engine business jet. It includes dimensions, weight configurations, and performance parameters for 20 existing medium business jets analyzed to determine ideal specifications for the new design. Weight estimation was conducted and various design elements were researched and selected, including a cantilever low wing with tapered airfoils. Performance calculations and graphs were included to analyze the 17-seater twin turbofan jet, which will have a maximum speed of 750mph. The report concludes with future work plans and references.
The Airbus A-310
The Airbus A-310 was developed as a shorter-fuselage version of the A-300 to allow it to operate on routes with lower passenger capacity needs. It featured a 12-frame shorter fuselage than the A-300 for 245 passengers. The wing design was modified from the A-300 with a smaller span and area, reducing weight by over 3 tons. Initial orders came from launch customers Lufthansa, Swissair, and KLM who were interested in its shorter range capabilities and lower operating costs relative to larger aircraft.
ATDA Commecial Transport Airframe Part 1.pdf
This is Part 1 of work for my Advanced Technology Demonstration Aircraft project, to inspire interest in aerospace engineering for the RAeS and AIAA.
Group Project Final
This document provides an overview of a group project on the Boeing 737-800 aircraft. The group members are listed and the due date is January 21, 2016. The report contains details on the history, design, and aspects of the 737-800, including mass and center of gravity, engines, fuselage, undercarriage, wings, and tail. Simulations were conducted using a flight simulator to analyze changes made to aspects like wing dihedral angle and sweep. It was concluded that the ideal wing dihedral is 60 degrees and the current wing sweep of 25.02 degrees is sufficient, though a higher sweep could allow for higher speeds.
Light combact aircraft tejas tms
The document summarizes the Light Combat Aircraft Tejas, India's indigenous fourth-generation fighter aircraft. It describes the Tejas as a tailless delta wing aircraft developed as part of India's Light Combat Aircraft program to replace aging MiG-21 fighters. Key aspects summarized include the Tejas' design prioritizing light weight and high maneuverability, its composite material airframe, advanced avionics and systems developed domestically, and use of an American GE engine providing supersonic speed and long range.
Airbusa3 Xx, P F Case Final
The document summarizes information about the Airbus A380 aircraft:
1. The A380 is a double-deck airliner manufactured by Airbus that can carry 555 passengers. It has the largest cabin space and passenger capacity of any commercial airliner.
2. Key features include its twin-deck design, spacious cabins on the upper and lower decks, and three class configurations for seating.
3. Compared to the Boeing 747, the A380 has more seats, larger windows, more headroom, and wider seats that provide more space per passenger.
Strategic Management - Airbus A-380
The document provides information about the Airbus A380 aircraft, including its key specifications and features. It summarizes that the A380 is a double-deck, four-engine airliner manufactured by Airbus that can carry 555 passengers in standard configuration. Some of its key aspects include its large 79.8 meter wingspan, 73 meter length, 24.1 meter height and maximum takeoff weight of over 1.2 million pounds. It has a longer range than the Boeing 747 and provides passengers with more space and amenities due to its double-deck design. The arrival of the A380 in India made aviation history as it landed at the New Delhi airport despite runway width limitations.
Airbus A380
The Airbus A380 is a double-deck airliner manufactured by Airbus that can carry 555 passengers. It has a maximum speed of Mach 0.88 and a maximum altitude of 43,000 feet. The A380 provides 50% more floor space than other airliners and has a lower operating cost per seat than the Boeing 747.
Blended Wing Body (BWB) - Future Of Aviation
What is Blended Wing Body, History, Advantages And Disadvantages, Design and Structure, How airplanes Fly, Conventional airplanes vs. BWB, Future Scope And Challenges.
Blended Wing Body (BWB) - Future Of Aviation
What Is Blended Wing Body, History of BWB, How Airplanes Fly, Aircraft Control Surfaces, Design and Structure of BWB, Advantages and Disadvantages, Conventional aircraft vs. BWB, Future Scope and Challenges
737
The document provides airplane characteristics data for the Boeing 737 family of airplanes to assist with airport planning. It describes the various 737 models, including their lengths, engines, interior configurations, and optional equipment. The 737 models range from the 737-100 to the 737-900ER. The document is intended to help airport planners, airlines, engineers, and other aviation organizations with facility design and operations involving 737 airplanes.
At a glance COMPOSITE INDUSTRIE repair presentation Vers 8 26-1-2017
This document provides an overview of Composite Industrie, an MRO service centre that specializes in composite repairs for aircraft structures and engines. It summarizes Composite Industrie's main customers which include over 100 airlines and MRO centres globally. It also lists Composite Industrie's quality certifications and capabilities including equipment, facilities for composite repairs, engineering services, and capabilities to repair aircraft structures like radomes, nacelles, flight controls and composites on engines.
Similar to Aircraft Structure Presentation.pptx (20)
Design your flight 2013 guru gobind singh indraprastha university-team leo (2)
Design your flight 2013 guru gobind singh indraprastha university-team leo (2)
At a glance COMPOSITE INDUSTRIE repair presentation Vers 8 26-1-2017
At a glance COMPOSITE INDUSTRIE repair presentation Vers 8 26-1-2017
More from The University of Lahore
Pro.pptx
The document discusses the Cessna 425 aircraft, including its specifications and construction. It provides details on the aircraft's dimensions, capacity, weight, engine, and performance specifications. It also describes the aerodynamics of propellers, explaining that thrust results from propeller shape and angle of attack, and is equal to the mass of air handled multiplied by the difference between slipstream velocity and aircraft velocity. Finally, it explains the working principle of a propeller governor, which adjusts propeller pitch to keep the engine speed constant during climbs and dives.
Turbocharging of the Piston Engine.pdf
The document discusses turbocharging of piston engines. It provides a brief history of the turbocharger, invented in 1905. A turbocharger uses the engine's exhaust gases to drive a turbine which spins an air compressor, forcing more air into the combustion chamber and allowing the engine to produce more power. It describes the key parts of a turbocharger and how it works to increase air density and engine power. Advantages include improved fuel efficiency and power, while disadvantages include increased noise and cost.
Aviation Legislation JAR OPS.pptx
JAR OPS Commercial Air Transportation (Aeroplanes). This PPT file will help you in understanding about JAR OPS. It includes different aspects of JAR OPS.
Encoder and decoder
An encoder converts an analog signal to a digital signal or encodes information from multiple inputs into an output code. A decoder performs the reverse operation by converting a digital signal to analog or decoding an input code into multiple outputs. Encoders and decoders are used in applications like motor synchronization, robotic vehicles, home automation, and health monitoring where information needs to be encoded for transmission and then decoded at the receiving end.
Democracy and Dictatorship in Pakistan
This document provides an overview of democracy and dictatorship in Pakistan. It discusses the forms and history of democracy in Pakistan, including periods of democratic and dictatorial rule. It outlines the basic principles and merits of democracy, as well as drawbacks such as corruption. Periods of dictatorship in Pakistan under various military leaders are also summarized. The document concludes by suggesting that education is key to strengthening democracy in Pakistan.
Islam and Social Media
It will help to know about negative and impact of media on Islam. It contains enough data for understanding. I am always passionate about new learning. I can write assignments for anyone.
More from The University of Lahore (6)
Recently uploaded
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
For International shipping and maritime laws all wood must contain the ISPM 15 Stamp. Here is how and why.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
Recently uploaded (20)
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
gray level transformation unit 3(image processing))
gray level transformation unit 3(image processing))
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
ISPM 15 Heat Treated Wood Stamps and why your shipping must have one
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Aircraft Structure Presentation.pptx
- 1. Sunday, December 25, 2022 1
- 2. AIRBUSA380MODERN AIRCRAFT Program: BS-AMT Semester: 6th Course: Aircraft Structures Instructor: Dr Saqib Hameed Batch: 8 Name: Omer Ishfaq Reg. No: 70074041 CONSTRUCTION Sunday, December 25, 2022 2
- 3. Sunday, December 25, 2022 3
- 4. Contents History Old vs New Structure Construction Fuselage of AirbusA380 Wings of AirbusA380 Landing Gear of AirbusA380 Sunday, December 25, 2022 4
- 5. History The fuselage is the main structure or body of the fixed-wing aircraft. It provides space for cargo, controls, accessories, passengers, and other equipment. In single-engine aircraft, the fuselage houses the powerplant. In multiengine aircraft, the engines may be either in the fuselage, attached to the fuselage, or suspended from the wing structure. There are two general types of fuselage construction. Truss Monocoque Monocoque Semimonocoque Sunday, December 25, 2022 5
- 6. Sunday, December 25, 2022 6
- 7. Construction Modern airplane, such as the A380 have seen a switch to composite materials for fuselage construction. This seems set to stay as the way forward for new aircraft designs. There are challenges, but the lower weight offering significant improvements in efficiency and operating cost. Sunday, December 25, 2022 7
- 8. Sunday, December 25, 2022 8 The example on the A380 super sized aircraft shows that 61% of the structure is made of aluminum alloys, 22% in composites, 10% in titanium and steel and 3% in fiber metal laminate.
- 9. Sunday, December 25, 2022 9
- 10. Fuselage of Airbus A380 Sunday, December 25, 2022 10 The example on the A380 super sized aircraft shows that 61% of the structure is made of aluminum alloys, 22% in composites, 10% in titanium and steel and 3% in fiber metal laminate.
- 11. Fuselage of AirbusA380 Sunday, December 25, 2022 11 General Typical Seating 555 passengers Length 73 Metres (239 Feet 6 Inches) Height 24.1 Metres (79 Feet) Fuselage Diameter 7.14 Metres (23 Feet 5 Inches)
- 12. Wings of AirbusA380 Sunday, December 25, 2022 12 The A380 is the first commercial airliner to have a central wing box made of carbon–fibre reinforced plastic. It is also the first to have a smoothly contoured wing cross–section
- 13. Sunday, December 25, 2022 13
- 14. Sunday, December 25, 2022 14 Track 14.3 Metres (46 Feet 11 Inches) Wing Area 843 Square Metres (9,096 Square Feet) Wing Span 79.8m (261 Feet 10 Inches) Wings of AirbusA380
- 15. Sunday, December 25, 2022 15
- 16. Landing Gear of AirbusA380 Sunday, December 25, 2022 16 Landing gear has to support the entire weight of the aircraft, so it has to be incredibly sturdy. This is why the landing gear is usually made of steel, which is robust, but heavy (which is why it is not used on other parts of the plane). Some parts are also made of titanium alloys. Every Emirates Airbus A380 aircraft has a landing gear system with a total of 22 landing wheels
- 17. Sunday, December 25, 2022 17