Agriculture Engineering-chptr 10
•
4 likes•1,961 views
The document summarizes the basic functions and operations of a tractor's hydraulic system and 3 point linkage. The hydraulic system provides power for steering, brakes, transmission, implement control, remote cylinders, and hydraulic motors. It uses hydraulic fluid as the power transmitting medium and for lubrication and cooling. There are two types of implement control - power lift (rockshaft) used for mounted implements, and remote control for pull-type implements. The document explains how the control lever and automatic draft control can be used to raise implements like a plow that encounters hard ground.
Report
Share
Report
Share
Download to read offline
Recommended
Tractor hydraulics
This presentation will provide you with in insight of what is tractor hydraulics and what are the different parts of a tractor involved and how can it be controlled
Hydrostatic transmissions
Hydrostatic transmissions use a pump and motor connected in a hydraulic circuit to transmit power. They have four basic configurations: in-line, U-shaped, S-shaped, and split. Hydrostatic transmissions offer advantages like operating over a wide speed range without changing the prime mover speed and providing dynamic braking. They use either an open or closed hydraulic circuit and precisely control fluid flow and motor speed through variable displacement pumps and swash plates.
Hydrostatic transmission
1. The document discusses different types of hydrostatic transmissions, including open-circuit, closed-circuit, and reversible systems.
2. Key components of hydrostatic transmissions are described, including the charge pump, relief valves, motors, and pumps. The selection process for pumps and motors is also outlined.
3. Various pressure control valves used in hydrostatic systems are explained, such as relief valves, counterbalance valves, sequence valves, and pressure reducing valves. Shuttle valves are also introduced.
Hydraulic Pumps, Motors and Actuators
Hydraulic Pumps, Motors and Actuators:
Construction, working principle and operation of rotary & reciprocating pumps like Gear, Vane, Generated-Rotor, Screw, Axial Piston, Radial Piston, Pump characteristics, Linear and Rotary Actuators, Hydrostatic Transmission Systems. Selection of components for applications
Power Steering
The document provides an overview of power steering systems. It discusses the history of power steering from its invention in the early 1900s to its use in automobiles and agricultural vehicles. The key components of power steering systems are described including the reservoir, steering gearbox, rotary valve, and pump. The main types of power steering systems - hydraulic, electro-hydraulic, and electric - are outlined along with diagrams of how each system works. Advantages like reduced driver fatigue and continuous steering are balanced with potential disadvantages such as leakage and vibration.
Hydraulic Machines Fluid coupling, Fluid torque converter
This document discusses hydraulic machines, specifically fluid couplings and fluid torque converters. It describes how fluid couplings work by using a pump impeller and turbine runner to transfer rotational energy between two shafts without a direct mechanical connection. The driven shaft speed is typically 2-4% lower than the driving shaft due to losses. Fluid couplings are 98% efficient and isolate vibrations. Fluid torque converters build on this design by adding a stationary reaction member, allowing variable torque transfer between shafts. They are commonly used in automatic transmissions for vehicles, marine propulsion, industrial machinery, and locomotives.
2015 02-05 emet 135 week 1 presentation
This document provides an overview of fluid power systems. It defines fluid power as any system that converts, transmits, or controls power through pressurized liquids or gases. The key components of fluid power systems include a prime mover, pump or compressor, transmission lines, and actuators. Fluid power systems are generally classified as hydraulic (using liquid) or pneumatic (using gas). The document then discusses the basic layout, functions, components and operation of hydraulic and pneumatic systems.
Design and development of hst transmission system @tafe
The document describes the design and development of a hydrostatic transmission system for an agricultural tractor. It includes:
1) An overview of the objectives which are to design and develop a hydrostatic transmission and evaluate its performance under laboratory conditions.
2) Details of the design process which includes sizing the transmission based on tractor specifications, selecting hydraulic components like the pump and motor, and designing the hydraulic circuit.
3) Additional sections that describe the theoretical workings of a hydrostatic transmission, advantages, component selection criteria like for hoses and fluid, and the performance evaluation test plan.
Recommended
Tractor hydraulics
This presentation will provide you with in insight of what is tractor hydraulics and what are the different parts of a tractor involved and how can it be controlled
Hydrostatic transmissions
Hydrostatic transmissions use a pump and motor connected in a hydraulic circuit to transmit power. They have four basic configurations: in-line, U-shaped, S-shaped, and split. Hydrostatic transmissions offer advantages like operating over a wide speed range without changing the prime mover speed and providing dynamic braking. They use either an open or closed hydraulic circuit and precisely control fluid flow and motor speed through variable displacement pumps and swash plates.
Hydrostatic transmission
1. The document discusses different types of hydrostatic transmissions, including open-circuit, closed-circuit, and reversible systems.
2. Key components of hydrostatic transmissions are described, including the charge pump, relief valves, motors, and pumps. The selection process for pumps and motors is also outlined.
3. Various pressure control valves used in hydrostatic systems are explained, such as relief valves, counterbalance valves, sequence valves, and pressure reducing valves. Shuttle valves are also introduced.
Hydraulic Pumps, Motors and Actuators
Hydraulic Pumps, Motors and Actuators:
Construction, working principle and operation of rotary & reciprocating pumps like Gear, Vane, Generated-Rotor, Screw, Axial Piston, Radial Piston, Pump characteristics, Linear and Rotary Actuators, Hydrostatic Transmission Systems. Selection of components for applications
Power Steering
The document provides an overview of power steering systems. It discusses the history of power steering from its invention in the early 1900s to its use in automobiles and agricultural vehicles. The key components of power steering systems are described including the reservoir, steering gearbox, rotary valve, and pump. The main types of power steering systems - hydraulic, electro-hydraulic, and electric - are outlined along with diagrams of how each system works. Advantages like reduced driver fatigue and continuous steering are balanced with potential disadvantages such as leakage and vibration.
Hydraulic Machines Fluid coupling, Fluid torque converter
This document discusses hydraulic machines, specifically fluid couplings and fluid torque converters. It describes how fluid couplings work by using a pump impeller and turbine runner to transfer rotational energy between two shafts without a direct mechanical connection. The driven shaft speed is typically 2-4% lower than the driving shaft due to losses. Fluid couplings are 98% efficient and isolate vibrations. Fluid torque converters build on this design by adding a stationary reaction member, allowing variable torque transfer between shafts. They are commonly used in automatic transmissions for vehicles, marine propulsion, industrial machinery, and locomotives.
2015 02-05 emet 135 week 1 presentation
This document provides an overview of fluid power systems. It defines fluid power as any system that converts, transmits, or controls power through pressurized liquids or gases. The key components of fluid power systems include a prime mover, pump or compressor, transmission lines, and actuators. Fluid power systems are generally classified as hydraulic (using liquid) or pneumatic (using gas). The document then discusses the basic layout, functions, components and operation of hydraulic and pneumatic systems.
Design and development of hst transmission system @tafe
The document describes the design and development of a hydrostatic transmission system for an agricultural tractor. It includes:
1) An overview of the objectives which are to design and develop a hydrostatic transmission and evaluate its performance under laboratory conditions.
2) Details of the design process which includes sizing the transmission based on tractor specifications, selecting hydraulic components like the pump and motor, and designing the hydraulic circuit.
3) Additional sections that describe the theoretical workings of a hydrostatic transmission, advantages, component selection criteria like for hoses and fluid, and the performance evaluation test plan.
Chap 3 auto transmission
Maaf saya tidak dapat menyediakan ringkasan dalam bahasa Melayu atau tulisan tangan seperti yang diminta. Saya hanyalah sebuah asisten virtual yang dapat berinteraksi dalam bahasa Inggeris. Untuk memenuhi permintaan anda, saya sarankan anda meminta bantuan daripada seorang individu yang dapat menyediakan ringkasan dalam bahasa dan format yang diminta. Saya bersedia membantu dalam bahasa Inggeris jika diperlukan. Terima
Fluid couplin gppt
This document discusses fluid couplings and hydraulic torque converters. It describes their construction, working principles, efficiencies, uses, and differences. A fluid coupling transmits power between shafts using an liquid medium, with no direct contact. A hydraulic torque converter also uses liquid to transmit variable torque without gears or clutches, and can multiply torque up to 5 times. Both are used in automotive and industrial applications where smooth starting torque is required.
Farm tractor
The agricultural tractor is one of the class of mobile machines that involves the ‘traction’ process.
The tractor is also in the class of machines that involves operation under what are known as 'off- road' conditions.
Others in this class include machines used in earth moving, mining and military work.
The word tractor appeared first on record in a patent issued on a tractor or traction engine invented by George H. Harris of ChicagO
1 hydraulic actuators cylinders
Hydraulic cylinders are linear actuators that convert hydraulic pressure into mechanical force and motion. There are several types of cylinders including single-acting, double-acting, and telescopic cylinders. Single-acting cylinders produce force in one direction only, while double-acting cylinders can produce force in both extension and retraction using ports on both sides of the piston. Telescopic cylinders extend in stages to provide a long stroke length and short retracted length. Cushioning devices are often used on cylinders to control the rate of deceleration and prevent shock at the end of the piston stroke.
Hydraulic System of Aircrafts
Hydraulics is the study of pressurized liquids in mechanical systems. It involves transmitting force from one area to another using an incompressible fluid like oil. Pascal's law states that pressure exerted anywhere in a confined fluid is transmitted equally throughout. A basic hydraulic system includes a reservoir, pump, actuator, and directional control valve. The pump converts mechanical energy to hydraulic energy by pressurizing the fluid. This pressure is then used by actuators like cylinders and motors to do physical work. Filters are used to keep the fluid clean for long component life. Common applications include aircraft landing gears, fuel systems, and flight control surfaces.
Agricultural engineering
The document provides information about various components of agricultural machinery systems. It discusses the functions of components in cooling, lubrication, electrical, transmission, and other systems. It also describes maintenance procedures for diesel, transmission, PTO, lubrication, and cooling systems to maintain engine performance. Safety procedures for working in a farm workshop are listed, including proper use of tools, precautions for electric shock, compressed air, welding, and jacking up tractors.
Hydrostatic Continuous Variable Power Transmission Drive for Two wheelers usi...
Power transmission is an extremely important factor for the automotive industry today. In vehicles, the power transmission system is the major source of energy losses. This is an intentionally compact review for a module addressing basic Fluid Mechanics for incompressible fluids within the context of Applied Energy Systems. Rather than attempting to cover Fluid Mechanics in a very broad and general way, two practical areas are selected in the use of fluids, hydrostatic power transmission systems and the flow of fluids through pipes and fittings. Thus readers are prepared for applying the same and similar principles to a much broader range of practical applications in the future. The present review work relates to a rotary pump and motor transmission system, which permits a change in ratio between the speed of the driver and driven shafts from direct drive to neutral position. This transmission, which may be adopted for many uses, such as vehicles and machine tools, is endowed with the utmost ease of operation even under load, is of a simple and rugged construction and offers safety of operation even after an extended use.
Hydraulic pump and motor by hamza nawaz
This document discusses hydraulic pumps and motors. It defines fluid machines and classifies them as positive displacement or dynamic, and as turbines/motors or pumps/blowers based on direction of energy conversion. Common types of hydraulic pumps include plunger pumps, axial piston pumps, and peristaltic pumps. Examples of hydraulic motors provided are radial piston motors, vane motors, and gear motors. Formulas for evaluating hydraulic pumps and motors' flow, power, mechanical efficiency, and hydraulic efficiency are also presented. Applications mentioned include various industries like manufacturing, mining, construction, and transportation.
Hydrostatic transmission as an alternative to conventional gearbox
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Basic hydraulic systems
The document discusses aircraft hydraulic systems. It describes how a basic hydraulic system works by using valves and pistons to move control surfaces. It then notes that hydraulic systems are used for flight control and moving structures like flaps, landing gear, and weapons bays by providing extra force. The document lists common hydraulic fluid specifications and pressure ranges. It identifies problems with hydraulic systems like their weight, maintenance costs, and space requirements. Finally, it discusses potential improvements like electric actuators and electro-mechanical actuators that could address these issues.
Hydraulic Actuation of Valve
This document presents a hydraulic actuation of valve (HAV) system as an alternative to existing mechanical valve actuation systems for two-wheeler engines. The HAV system uses hydraulic principles to operate the valves via camshaft cylinders and valve cylinders connected by oil lines, eliminating the need for components like pushrods and rocker arms. It offers advantages like reduced engine size, weight, and number of parts. The HAV system is compared to typical mechanical systems like SOHC and DOHC, showing its benefits. Future applications to four-valve engines are also discussed. In conclusion, the HAV system provides a lighter and simpler valve actuation design for two-wheelers compared to conventional mechanical systems.
3.1 turbine and governing
This document provides guidance for selecting hydraulic turbines and governing systems for hydroelectric projects up to 25 MW. It discusses key site data needed for selection, including net head values. It then classifies and describes the main turbine types - Francis, propeller, Kaplan, and impulse turbines. Selection criteria are outlined based on site parameters like head and flow. Guidelines are provided for selecting turbines for different size ranges from micro-hydro to larger mini and small hydro projects. Performance parameters like efficiency, operating ranges, and cavitation characteristics are also covered. The document concludes with sections on governing systems and examples.
Lecture 8Cylinders & open and closed circuit
The document describes open and closed loop hydraulic systems used to raise and lower loads using hydraulic cylinders. It explains how a pressure regulating valve is used to prevent excessive pressure build up when the pump is deadheaded. It provides details on the components and operation of hydraulic cylinders, including the cylinder barrel, piston, piston rod, seals, and different cylinder designs like tie rod and welded body cylinders. The pressure regulating valve helps maintain a safe pressure level between its cracking and full flow pressures.
Hydraulic actuator 2003
An actuator is a motor that converts energy into motion. Hydraulic actuators use pressurized fluid to move a piston inside a cylinder. This provides precise linear motion. Common types include single-acting cylinders, which move in one direction, and double-acting cylinders, which can move in both directions. Hydraulic actuators are used widely in industrial and vehicular applications due to their strength, precision of movement, and ability to produce high torque.
Tractor PTO
This document summarizes information about power take-off (PTO) systems on tractors and the hazards associated with them. It notes that PTOs transfer power from tractors to farm implements like augers, spreaders, and mowers. The document then discusses how PTOs operate at high speeds and can be dangerous if not properly shielded. It provides statistics showing that most PTO incidents involve stationary equipment and occur when the PTO is left engaged without the equipment moving.
AIRCRAFT HYDRAULIC SYSTEMS
This document provides an overview of hydraulic systems used in aircraft. It describes how hydraulic systems use incompressible liquids and pumps to transmit energy and power various aircraft components. It then lists some common uses of hydraulic systems in aircraft, such as for gun turrets, auto pilots, shock absorption, brakes, doors and landing gear. The document proceeds to explain the basic principles and components of hydraulic systems, including reservoirs, accumulators, filters, pumps, valves and actuating cylinders.
HYDRAULIC AND PNEUMATIC ACTUATOR
This document discusses different types of actuation systems used in control systems, focusing on pneumatic and hydraulic systems. It describes how directional control valves are used to direct fluid flow through pneumatic and hydraulic systems. Common types of directional control valves include spool valves, rotary spool valves, and poppet valves. Process control valves are also discussed, along with how diaphragm actuators are used to control fluid flow rates. Finally, the document briefly covers single-acting and double-acting cylinders used in pneumatic and hydraulic systems.
Basic hydraulic systems_and_components
This lesson discusses hydraulic reservoirs, filters, pumps, accumulators, and motors. Reservoirs store hydraulic fluid and minimize contamination. Filters remove contaminants from the fluid. Pumps convert mechanical energy to hydraulic energy and are either hand-operated or powered. Common powered pumps are constant delivery piston pumps and variable delivery piston or vane pumps. Accumulators store hydraulic energy as compressed gas. Motors convert hydraulic pressure to mechanical rotation.
9900-4412_00_electric-vs-hydraulic-actuators-wp
Electric rod actuators provide superior motion control capabilities compared to hydraulic cylinders, allowing for precise control of position, velocity, acceleration, deceleration, and force. While hydraulic cylinders can produce extremely high forces, electric actuator systems are capable of achieving high forces as well and provide automated current regulation for on-demand force output. Electric systems also have significantly fewer components, take up less space, and are better able to manage heat compared to hydraulic systems.
Future valve system in engine
This document presents an overview of camless valve systems in engines. It discusses the limitations of traditional camshaft-based systems and introduces two main types of camless systems - electro-mechanical and electro-hydraulic. Electro-mechanical systems use electromagnetic actuators like solenoids to directly open and close valves, allowing for variable valve timing and lift. Electro-hydraulic systems use pressurized hydraulic fluid and actuators controlled by solenoid valves to provide continuously variable control of valve parameters. Camless systems offer benefits like increased fuel efficiency and power but are more complex and expensive than traditional camshaft designs.
Tractor ppt
This document discusses tractor safety hazards and how to operate tractors safely. The five key mechanical hazards are roll-overs, run-overs, PTO hazards, mounting/dismounting, and noise. The five human factors that contribute to hazardous operation are risk taking behavior, insufficient training, physical limitations, impaired functions, and psychological limitations. The three main environmental hazards are broken ground, sloping ground, and climatic influences. The document provides guidance on controlling risks from each of these hazards.
Three point hitch components of tractor
The 3-point hitch system is used on farming tractors to attach implements like plows and cultivators. It consists of a center link and two lift arms or links that connect to the implement. Category II implements should have their mast holes located 610 mm above the lower pins. The rockshaft position control lever raises and lowers the hitch to adjust the implement height, while the draft control lever controls the hitch position under load. Proper adjustment of the hitch links is needed to level the front-to-back and side-to-side position of the attached implement.
More Related Content
What's hot
Chap 3 auto transmission
Maaf saya tidak dapat menyediakan ringkasan dalam bahasa Melayu atau tulisan tangan seperti yang diminta. Saya hanyalah sebuah asisten virtual yang dapat berinteraksi dalam bahasa Inggeris. Untuk memenuhi permintaan anda, saya sarankan anda meminta bantuan daripada seorang individu yang dapat menyediakan ringkasan dalam bahasa dan format yang diminta. Saya bersedia membantu dalam bahasa Inggeris jika diperlukan. Terima
Fluid couplin gppt
This document discusses fluid couplings and hydraulic torque converters. It describes their construction, working principles, efficiencies, uses, and differences. A fluid coupling transmits power between shafts using an liquid medium, with no direct contact. A hydraulic torque converter also uses liquid to transmit variable torque without gears or clutches, and can multiply torque up to 5 times. Both are used in automotive and industrial applications where smooth starting torque is required.
Farm tractor
The agricultural tractor is one of the class of mobile machines that involves the ‘traction’ process.
The tractor is also in the class of machines that involves operation under what are known as 'off- road' conditions.
Others in this class include machines used in earth moving, mining and military work.
The word tractor appeared first on record in a patent issued on a tractor or traction engine invented by George H. Harris of ChicagO
1 hydraulic actuators cylinders
Hydraulic cylinders are linear actuators that convert hydraulic pressure into mechanical force and motion. There are several types of cylinders including single-acting, double-acting, and telescopic cylinders. Single-acting cylinders produce force in one direction only, while double-acting cylinders can produce force in both extension and retraction using ports on both sides of the piston. Telescopic cylinders extend in stages to provide a long stroke length and short retracted length. Cushioning devices are often used on cylinders to control the rate of deceleration and prevent shock at the end of the piston stroke.
Hydraulic System of Aircrafts
Hydraulics is the study of pressurized liquids in mechanical systems. It involves transmitting force from one area to another using an incompressible fluid like oil. Pascal's law states that pressure exerted anywhere in a confined fluid is transmitted equally throughout. A basic hydraulic system includes a reservoir, pump, actuator, and directional control valve. The pump converts mechanical energy to hydraulic energy by pressurizing the fluid. This pressure is then used by actuators like cylinders and motors to do physical work. Filters are used to keep the fluid clean for long component life. Common applications include aircraft landing gears, fuel systems, and flight control surfaces.
Agricultural engineering
The document provides information about various components of agricultural machinery systems. It discusses the functions of components in cooling, lubrication, electrical, transmission, and other systems. It also describes maintenance procedures for diesel, transmission, PTO, lubrication, and cooling systems to maintain engine performance. Safety procedures for working in a farm workshop are listed, including proper use of tools, precautions for electric shock, compressed air, welding, and jacking up tractors.
Hydrostatic Continuous Variable Power Transmission Drive for Two wheelers usi...
Power transmission is an extremely important factor for the automotive industry today. In vehicles, the power transmission system is the major source of energy losses. This is an intentionally compact review for a module addressing basic Fluid Mechanics for incompressible fluids within the context of Applied Energy Systems. Rather than attempting to cover Fluid Mechanics in a very broad and general way, two practical areas are selected in the use of fluids, hydrostatic power transmission systems and the flow of fluids through pipes and fittings. Thus readers are prepared for applying the same and similar principles to a much broader range of practical applications in the future. The present review work relates to a rotary pump and motor transmission system, which permits a change in ratio between the speed of the driver and driven shafts from direct drive to neutral position. This transmission, which may be adopted for many uses, such as vehicles and machine tools, is endowed with the utmost ease of operation even under load, is of a simple and rugged construction and offers safety of operation even after an extended use.
Hydraulic pump and motor by hamza nawaz
This document discusses hydraulic pumps and motors. It defines fluid machines and classifies them as positive displacement or dynamic, and as turbines/motors or pumps/blowers based on direction of energy conversion. Common types of hydraulic pumps include plunger pumps, axial piston pumps, and peristaltic pumps. Examples of hydraulic motors provided are radial piston motors, vane motors, and gear motors. Formulas for evaluating hydraulic pumps and motors' flow, power, mechanical efficiency, and hydraulic efficiency are also presented. Applications mentioned include various industries like manufacturing, mining, construction, and transportation.
Hydrostatic transmission as an alternative to conventional gearbox
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Basic hydraulic systems
The document discusses aircraft hydraulic systems. It describes how a basic hydraulic system works by using valves and pistons to move control surfaces. It then notes that hydraulic systems are used for flight control and moving structures like flaps, landing gear, and weapons bays by providing extra force. The document lists common hydraulic fluid specifications and pressure ranges. It identifies problems with hydraulic systems like their weight, maintenance costs, and space requirements. Finally, it discusses potential improvements like electric actuators and electro-mechanical actuators that could address these issues.
Hydraulic Actuation of Valve
This document presents a hydraulic actuation of valve (HAV) system as an alternative to existing mechanical valve actuation systems for two-wheeler engines. The HAV system uses hydraulic principles to operate the valves via camshaft cylinders and valve cylinders connected by oil lines, eliminating the need for components like pushrods and rocker arms. It offers advantages like reduced engine size, weight, and number of parts. The HAV system is compared to typical mechanical systems like SOHC and DOHC, showing its benefits. Future applications to four-valve engines are also discussed. In conclusion, the HAV system provides a lighter and simpler valve actuation design for two-wheelers compared to conventional mechanical systems.
3.1 turbine and governing
This document provides guidance for selecting hydraulic turbines and governing systems for hydroelectric projects up to 25 MW. It discusses key site data needed for selection, including net head values. It then classifies and describes the main turbine types - Francis, propeller, Kaplan, and impulse turbines. Selection criteria are outlined based on site parameters like head and flow. Guidelines are provided for selecting turbines for different size ranges from micro-hydro to larger mini and small hydro projects. Performance parameters like efficiency, operating ranges, and cavitation characteristics are also covered. The document concludes with sections on governing systems and examples.
Lecture 8Cylinders & open and closed circuit
The document describes open and closed loop hydraulic systems used to raise and lower loads using hydraulic cylinders. It explains how a pressure regulating valve is used to prevent excessive pressure build up when the pump is deadheaded. It provides details on the components and operation of hydraulic cylinders, including the cylinder barrel, piston, piston rod, seals, and different cylinder designs like tie rod and welded body cylinders. The pressure regulating valve helps maintain a safe pressure level between its cracking and full flow pressures.
Hydraulic actuator 2003
An actuator is a motor that converts energy into motion. Hydraulic actuators use pressurized fluid to move a piston inside a cylinder. This provides precise linear motion. Common types include single-acting cylinders, which move in one direction, and double-acting cylinders, which can move in both directions. Hydraulic actuators are used widely in industrial and vehicular applications due to their strength, precision of movement, and ability to produce high torque.
Tractor PTO
This document summarizes information about power take-off (PTO) systems on tractors and the hazards associated with them. It notes that PTOs transfer power from tractors to farm implements like augers, spreaders, and mowers. The document then discusses how PTOs operate at high speeds and can be dangerous if not properly shielded. It provides statistics showing that most PTO incidents involve stationary equipment and occur when the PTO is left engaged without the equipment moving.
AIRCRAFT HYDRAULIC SYSTEMS
This document provides an overview of hydraulic systems used in aircraft. It describes how hydraulic systems use incompressible liquids and pumps to transmit energy and power various aircraft components. It then lists some common uses of hydraulic systems in aircraft, such as for gun turrets, auto pilots, shock absorption, brakes, doors and landing gear. The document proceeds to explain the basic principles and components of hydraulic systems, including reservoirs, accumulators, filters, pumps, valves and actuating cylinders.
HYDRAULIC AND PNEUMATIC ACTUATOR
This document discusses different types of actuation systems used in control systems, focusing on pneumatic and hydraulic systems. It describes how directional control valves are used to direct fluid flow through pneumatic and hydraulic systems. Common types of directional control valves include spool valves, rotary spool valves, and poppet valves. Process control valves are also discussed, along with how diaphragm actuators are used to control fluid flow rates. Finally, the document briefly covers single-acting and double-acting cylinders used in pneumatic and hydraulic systems.
Basic hydraulic systems_and_components
This lesson discusses hydraulic reservoirs, filters, pumps, accumulators, and motors. Reservoirs store hydraulic fluid and minimize contamination. Filters remove contaminants from the fluid. Pumps convert mechanical energy to hydraulic energy and are either hand-operated or powered. Common powered pumps are constant delivery piston pumps and variable delivery piston or vane pumps. Accumulators store hydraulic energy as compressed gas. Motors convert hydraulic pressure to mechanical rotation.
9900-4412_00_electric-vs-hydraulic-actuators-wp
Electric rod actuators provide superior motion control capabilities compared to hydraulic cylinders, allowing for precise control of position, velocity, acceleration, deceleration, and force. While hydraulic cylinders can produce extremely high forces, electric actuator systems are capable of achieving high forces as well and provide automated current regulation for on-demand force output. Electric systems also have significantly fewer components, take up less space, and are better able to manage heat compared to hydraulic systems.
Future valve system in engine
This document presents an overview of camless valve systems in engines. It discusses the limitations of traditional camshaft-based systems and introduces two main types of camless systems - electro-mechanical and electro-hydraulic. Electro-mechanical systems use electromagnetic actuators like solenoids to directly open and close valves, allowing for variable valve timing and lift. Electro-hydraulic systems use pressurized hydraulic fluid and actuators controlled by solenoid valves to provide continuously variable control of valve parameters. Camless systems offer benefits like increased fuel efficiency and power but are more complex and expensive than traditional camshaft designs.
What's hot (20)
Hydrostatic Continuous Variable Power Transmission Drive for Two wheelers usi...
Hydrostatic Continuous Variable Power Transmission Drive for Two wheelers usi...
Hydrostatic transmission as an alternative to conventional gearbox
Hydrostatic transmission as an alternative to conventional gearbox
Viewers also liked
Tractor ppt
This document discusses tractor safety hazards and how to operate tractors safely. The five key mechanical hazards are roll-overs, run-overs, PTO hazards, mounting/dismounting, and noise. The five human factors that contribute to hazardous operation are risk taking behavior, insufficient training, physical limitations, impaired functions, and psychological limitations. The three main environmental hazards are broken ground, sloping ground, and climatic influences. The document provides guidance on controlling risks from each of these hazards.
Three point hitch components of tractor
The 3-point hitch system is used on farming tractors to attach implements like plows and cultivators. It consists of a center link and two lift arms or links that connect to the implement. Category II implements should have their mast holes located 610 mm above the lower pins. The rockshaft position control lever raises and lowers the hitch to adjust the implement height, while the draft control lever controls the hitch position under load. Proper adjustment of the hitch links is needed to level the front-to-back and side-to-side position of the attached implement.
Maintenance and repairs of tractor
The document discusses maintenance and repairs for tractors. It recommends checking the owner's manual for maintenance schedules, obtaining the proper tools, protecting the tractor from weather, checking fluids regularly, and monitoring tire pressure. Common tractor issues covered include engines that won't start, produce black smoke, or take heavy loads. Solutions provided include cleaning air filters, adjusting valves, checking fuel systems, and repairing or replacing worn parts. Troubleshooting tips are also given for clutch, brake, hydraulic, and electrical systems. The document emphasizes following maintenance schedules and using the correct tools, fluids, and parts to keep tractors running properly.
Class2
The mouldboard plough has main components including a share, mouldboard, land side, frog, and tail piece. There are different types of shares and mouldboards. Plough accessories include a jointer to turn over a small furrow slice and a coulter to cut the furrow vertically ahead of the plough bottom. Other accessories are gauge wheels, land wheels, and furrow wheels. The mouldboard plough has adjustments for vertical and horizontal suction clearance as well as throat clearance. Plough size refers to the width of the soil cut.
Agriculture Engineering-chptr 11
Tillage and cultivation are important mechanical soil processes for crop growth. Primary tillage, like plowing, is more aggressive and leaves the soil rough, while secondary tillage works the soil shallowly to level, firm, and control weeds. Common primary tillage implements include moldboard plows and chisel plows, while common secondary tillage implements are disc harrows and cultivators. Tillage machines can be mounted, semi-mounted, or trailed depending on how they attach to tractors.
Tillage pattern vs fuel consumption
This presentation containing fuel consumption VS field tillage pattern of a SIFANG(12.6hp) power tiller. The operation took place in research field of HSTU, Dinajpur-5200, Bangladesh
Equipment for soil preparation
Farm tractors provide mechanical power to tillage implements for soil preparation. Common tillage implements include moldboard plows, which cut and invert soil layers; disk plows and harrows, which laterally displace soil using concave steel disks; and chisel plows and field cultivators, which break up soil clods without inverting layers. Tractor size is measured by PTO horsepower and can range from under 40 HP to over 400 HP, with large modern tractors costing over $200,000. These implements are used for primary and secondary tillage operations like seedbed preparation and weed control.
Ploughing pattern
This document discusses different plowing patterns that can be used when tilling agricultural fields. It describes the circuitous pattern, which begins at the field edge and works toward the center, throwing soil outward. It also outlines several headland patterns - one-way, gathering, and casting - which involve plowing runs parallel to each other with turns made on the edges. Additionally, it mentions continuous plowing, round and round plowing, and one-way plowing methods. The optimal pattern aims to minimize non-productive work and maximize efficient plowing runs while considering the field shape and plowing implements used.
Agriculture Engineering-chptr14
The document discusses factors that determine machine capacity, including speed, width, and efficiency. It defines theoretical field capacity as the maximum capacity at a given speed using the machine's full width. Effective field capacity is the actual capacity achievable over time and brings in the efficiency factor to represent real-world performance below the theoretical maximum. Understanding machine capacities allows farm managers to appropriately plan equipment purchases and ensure field operations can be completed on schedule.
Agriculture Insurance and Its Importance to Farmers
In USA, agriculture plays an important role in economy. Understanding the problem of farmers, The USA government came up with several insurance schemes for the farmers in Fresno to protect them from any damage or loss.
Agriculture Engineering-chptr15
1) The document discusses factors to consider when selecting a power unit, such as a tractor, to match the size and type of machines used for field operations.
2) Key factors include the engine type, power ratings, soil resistance, tractor and implement sizes, and matching implements to the tractor's power output to avoid overloading.
3) Power is measured in horsepower or kilowatts, with drawbar, PTO, and brake power representing the tractor's pulling, power take-off, and maximum engine power respectively. The document provides formulas to calculate power needs based on implement size, soil conditions, and operating speed.
cc tn aed aetc am&e p&p 2 tractors, farm equipments., ...
Tamil Nadu, Agricultural Engineering Department, Agricultural Machinery Training Centre, Tiruchirapalli,Training on Newly Developed Agricultural Machinery & Equipments,(Past & Present) - An 'U' Turn Look by Coomarasamy. C, Formerly EE, AED
Farm tractors and their management
Er. Uttam Raj Timilsina(MSc.Engineering,IIT Roorkee)
Professor of Agricultural Engineering,Agriculture and Forestry University (AFU), Rampur, Chitwan, Nepal
uttamrajtimilsina@gmail.com
*All Right Reserved**
Uploaded and Shared by AgriYouthNepal
Best Farm Tractors in the World
Find the List of Best Farm Tractors in the World at Tractor Agriculture. We are single point destination for all your Tractor Research related tasks.
http://www.tractoragriculture.com/best-farm-tractors-in-the-world/
If you need to find particular information regarding a specific Tractor Brand, then you can get all the related information here.
http://www.tractoragriculture.com/
Robotics: 2-Link Planar Manipulator
1. The document describes a 2 link planar manipulator with 2 rotational joints and specifies the link lengths and coordinate frames.
2. It covers the forward kinematics to find the endpoint using homogeneous transformations by composing individual coordinate transforms between frames.
3. As an example, it shows the coordinate transforms between Frame 0 to Frame 1 which is a rotation of 30 degrees and translation of (1,1) and between Frame 1 to Frame 2 which is a rotation of 60 degrees and translation of (1/2,√3/2).
project report on mahindra tractors....
Mahindra Tractors is the largest tractor manufacturer in India and has been the market leader since 1983. It has several assembly plants located across India. The report describes the various production processes at Mahindra Tractors' Muzaffarnagar plant, including the light machine shop, heavy machine shop, assembly shop, paint shop, and tool room. It provides details on the key components manufactured and machinery used in each shop. The assembly shop assembles components into tractors through various loops like the differential loop, engine loop, and others before and after painting. The report concludes with an overview of the dismounting stage to disassemble tractors.
Hydraulic system
-topics: 1)fluid power.
2)types of hydraulic fluids.
3)components of hydraulic system.
4)application on hydraulic system.
Viewers also liked (17)
Agriculture Insurance and Its Importance to Farmers
Agriculture Insurance and Its Importance to Farmers
cc tn aed aetc am&e p&p 2 tractors, farm equipments., ...
cc tn aed aetc am&e p&p 2 tractors, farm equipments., ...
Similar to Agriculture Engineering-chptr 10
8.Hydraulic system.pptx
The document summarizes the key components and operation of a tractor's hydraulic system. It discusses:
1) The main components of a hydraulic system including the hydraulic pump, cylinder, tank, control valve, and safety valve. The most common type of pump used is a gear pump.
2) How hydraulic systems use pressurized fluid to raise, lower, and operate implements through a hydraulic cylinder based on the principle of Pascal's law.
3) The different types of control valves like pressure relief valves and directional valves that regulate the fluid flow, pressure, and direction.
4) The methods of hydraulic control including position control, draft control, and mixed control for different agricultural operations.
FARM TRACTORS UNIT 4
The document discusses the components and operation of hydraulic systems used in tractors. Key components of hydraulic systems include a pump to pressurize the fluid, valves to control fluid flow, a hydraulic cylinder to do work by pushing or pulling, and a tank to store the fluid. The system works by pressurizing fluid from the pump which is directed by valves to the cylinder, causing the cylinder to extend or retract and performing work like raising or lowering implements.
Understanding the Components and Working of Hydraulic Scissor Lifts.pdf
If you're searching for a hydraulic scissor lift manufacturer in India, look at Vtech Hydraulics. As a premier hydraulic lift manufacturer in India, we offer a variety of scissor lifts, including automotive scissor lifts, car scissor lifts, aerial scissor lifts, and more. Please visit our website today for further information about our hydraulic scissor offerings.
Automatic Transmission
An automatic transmission uses a torque converter, gear train, and hydraulic system to shift gears automatically based on engine load and vehicle speed. The torque converter connects the engine to the transmission and transfers power through fluid. It multiplies torque for better acceleration. The gear train includes planetary gear sets that provide multiple gear ratios. Hydraulic pressure acts through the transmission fluid to engage clutches and bands, producing gear shifts without driver input as the vehicle speed increases.
FARM TRACTORS UNIT 2
This document describes the different valve mechanisms used in engines, including side valve, overhead valve, and overhead inlet with side exhaust mechanisms. It explains the key components of the valve train, including the camshaft, tappet, pushrod, rocker arm, and valves. The camshaft is used to actuate the valves to open and close according to the engine cycle. The rotating motion of the camshaft is converted to reciprocating motion by these components to precisely time the opening and closing of the intake and exhaust valves.
Hydraulic systems report
Hydraulics is a branch of science which deals with hydraulic fluid. It is used in places where cleanliness is not a priority but requires huge power to perform tasks.
application:
1. Industrial: Plastic processing machineries, steel making and primary metal extraction applications, automated production lines, machine tool industries, paper industries, loaders, crushes, textile machineries, R & D equipment and robotic systems etc.
2 Mobile hydraulics: Tractors, irrigation system, earthmoving equipment, material handling equipment, commercial vehicles, tunnel boring equipment, rail equipment, building and construction machineries and drilling rigs etc.
3 Automobiles: It is used in the systems like breaks, shock absorbers, steering system, wind shield, lift and cleaning etc.
4 Marine applications: It mostly covers ocean going vessels, fishing boats and navel equipment.
5 Aerospace equipment: There are equipment and systems used for rudder control, landing gear, breaks, flight control and transmission etc. which are used in airplanes, rockets and spaceships.
Auto trans
The document discusses automatic transmission systems and components. It covers the history of automatic transmissions from early models to modern designs. It also summarizes the key components and functions of transmission hydraulics, including pumps, valves, fluid pressure, and torque converters. Planetary gear sets and the various control devices like clutches, bands, and one-way clutches that are used to shift gears are also outlined.
7 power brakes
Power assisted brakes use either hydraulic or vacuum pressure to reduce the amount of force needed to press the brake pedal. Hydraulic systems use pressure from the power steering pump or an air compressor, while vacuum systems use pressure from the intake manifold. Both types work by creating pressure on one side of a booster piston to multiply the force applied through the brake pedal to the master cylinder. When the pedal is pressed, it closes off the pressure source and applies hydraulic pressure to the brakes. Releasing the pedal vents the booster pressure and allows the pedal to return freely. Servo brakes provide additional braking power needed for heavier vehicles through mechanical, hydraulic, or vacuum assisted systems.
1.5 ActuatorsSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS.ppt
The document discusses different types of hydraulic actuators, including piston cylinders and rotary motors. It describes single acting and double acting cylinders, and how telescopic cylinders provide a longer extension. It also covers cylinder force and velocity equations, cushioning systems using piston valves and metering pins, components of hydraulic cylinders like rods, pistons, seals, and motors. In summary, it provides an overview of common hydraulic actuators and their operating principles.
Shuttle car
The document summarizes the key components and functions of a shuttle car used in underground coal mining. The shuttle car collects coal from continuous miners at the mining face and transports it to conveyors or other loading equipment. It has four-wheel drive and hydraulic steering for maneuverability. Hydraulic and electric systems power functions like steering, braking, cable reeling and conveyor operation. Traction motors provide power to wheels via gearboxes. The shuttle car has controls and instrumentation to monitor operations.
MEKATRONIKA Aktuator.pptx
This document discusses different types of actuators used in mechatronics systems. It describes three main types of actuators: mechanical, electrical, and fluid (pneumatic and hydraulic). For each type, it provides examples and explanations of common varieties. Mechanical actuators convert one type of motion to another using components like screws, wheels, cams, and gears. Electrical actuators include motors that convert electrical energy to motion, such as AC, DC, servo, and stepper motors. Fluid actuators use compressed air or liquid to power cylinders and other devices that perform work through linear or rotary motion. The document also examines components like valves that are used to control fluid flow and pressure in pneumatic and hydraulic
Governing of francis turbine
The document summarizes the governing mechanism of a Francis water turbine. It describes the major components which include an oil pump, relay valve, servomotor cylinder, centrifugal governor, regulating ring, and regulating rod. It explains how these components work together in a closed loop control system to regulate the supply of water through partial opening and closing of the guide vanes based on the load. When the load is low, the governor senses the higher speed and causes the relay valve to direct oil to push the servomotor piston forward, partially closing the guide vanes.
Aircraft hydraulics
This document provides an overview of aircraft hydraulic systems. It discusses how hydraulic pumps convert mechanical power to hydraulic power, which is then used by actuating cylinders to provide mechanical actuation. The key components of hydraulic systems include reservoirs, filters, pumps, accumulators, relief valves, pressure regulators, and actuating cylinders. Hydraulic power allows for strong, responsive actuation and is well-suited for aircraft applications due to advantages like weight and reliability. Pressure regulated power systems are also summarized, which use a pressure regulator to control system pressure.
Project report on Hydraulic steering system.
This project report summarizes a student group's research on hydraulic steering systems. The group members are Tariq aziz, Azeem waqar, and Saud zaman. The report provides an overview of how hydraulic steering systems work, including the key components like the reservoir, pump, relief valve, control valve, and power cylinder. It also discusses the principles of how pressure differences in the hydraulic fluid allow for steering assistance as well as the advantages of hydraulic power steering over mechanical systems.
Automatic transmission
This document discusses the components and operation of automatic transmissions. It describes that automatic transmissions contain a torque converter, planetary gear set, and hydraulic control unit instead of a clutch. The torque converter uses transmission fluid to transfer power from the engine to the transmission without direct mechanical contact. Planetary gears enable different speed ratios by holding different elements stationary. The hydraulic control unit uses pressurized fluid to operate clutches and bands to switch between gears. Automatic transmissions provide conveniences over manual transmissions but can be less fuel efficient.
Hydraulic actuator presentation
This document discusses different types of hydraulic linear actuators. It describes single-acting actuators which can extend in one direction via hydraulic pressure and retract via gravity or a spring. Double-acting actuators can extend and retract via hydraulic pressure supplied to either end of the cylinder. Common types include cylinders with piston rods on one or both sides. The document also outlines the basic components of a hydraulic system including a pump to pressurize hydraulic fluid, valves to control fluid flow, piping to transport fluid, and a cylinder where fluid pressure is converted to linear motion.
chter 3 actuators.pdffejvrvfdvkceckevsvd
- Hydraulic actuators like cylinders are used to convert fluid pressure into mechanical motion or force. Single-acting cylinders produce force in one direction while double-acting cylinders can produce force in both directions.
- Directional control valves include check valves, two/four-way valves, and shuttle valves. They control the direction of fluid flow. Pressure control valves like relief valves limit system pressure while flow control valves regulate fluid flow rate and actuator speed.
- Properly selecting and using hydraulic components like actuators, valves, and linkages allows fluid power systems to efficiently control mechanical processes.
Module 2 Hydraulic Actuators and Motors
Hydraulic actuators and motors convert fluid energy into mechanical energy or motion. There are two main types of hydraulic actuators: linear actuators (cylinders) which provide force to drive a load in a straight line, and rotary actuators (motors) which provide torque to drive a load in a circular motion. Actuators are used in applications like forklifts, aircraft control surfaces, and industrial machinery to perform tasks that require force, movement, lifting, or other mechanical work.
Section 3 adv 12
1. The document discusses the components and functions of a light aircraft hydraulic system, including an engine-driven pump, accumulator, unloading valve, selector valves, pressure relief valves, and filter.
2. An advanced hydraulic system contains more components than a basic system and is used in aircraft to power functions that require higher power and efficiency.
3. The key components and their functions are described: the pump provides pressure and flow, the accumulator stores hydraulic pressure, the unloading valve relieves pressure when not needed, and filters remove small particles from the fluid to protect components.
Project report on ship rudder
This document describes a study of a rudder, rudderstock, and steering gear mechanism. It includes descriptions of the components of a steering system, including an actuator, pump unit, control valve, lock valve, and safety valve. It provides details on the functioning of these components in normal and emergency operating conditions. It also outlines procedures for installation, maintenance, and hydraulic mounting/dismounting of the rudder actuator. The document appears to be a project report submitted by students to fulfill degree requirements related to the study of ship steering systems and their components.
Similar to Agriculture Engineering-chptr 10 (20)
Understanding the Components and Working of Hydraulic Scissor Lifts.pdf
Understanding the Components and Working of Hydraulic Scissor Lifts.pdf
1.5 ActuatorsSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS.ppt
1.5 ActuatorsSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS.ppt
More from watak manga pilu
Soil Management-Calculation of fertilizer
1,000 kg of carbonaceous materials with a C:N ratio of 12:1 are applied to soil. 25% of the 400 kg of carbon in the materials is assimilated by microorganisms, reducing the C:N ratio to 8:1. This leaves 20.8 kg of nitrogen available for crops. An additional 39.2 kg of nitrogen is needed. Applying 85.2 kg of urea fertilizer which is 46% nitrogen would provide this amount. Fertilizer A, with 15% nitrogen content and costing RM8/kg of nitrogen, is a better buy than Fertilizer B at RM11.25/kg of nitrogen. One liter of liquid fertilizer containing 20
Agriculture Engineering-chptr13
This document summarizes different types of planting and fertilizer application equipment. It describes row crop planters, drills, broadcast seeders, and transplanting equipment that can be mounted on tractors or used independently. It provides details on key parts of seed drills like the seed box, furrow openers, metering devices, and land wheels. The document also outlines three common machines used for dry fertilizer application - drop spreaders, spin spreaders, and airplanes - and notes their capacities, spread widths/patterns, and typical application rates.
Agriculture Engineering-chptr12 irrigation
Irrigation is important for increasing crop yields and making production more reliable. It provides moisture to allow plant growth where it otherwise would not occur, protects against drought, allows for nutrient transport, and controls the growing environment. However, irrigation can cause issues like salinity, waterlogging, erosion, and damage to soil structure if not implemented properly. Sprinkler irrigation allows for varied land but has high costs, while drip irrigation conserves water and fertilizer but requires filters to prevent emitter clogging. Proper system design considers soil, crop, and weather factors.
Agriculture Engineering-chptr 9 power transmission
The document summarizes key components and functions of power transmission systems. It discusses the basic functions like selecting speed ratios, reversing travel, connecting/disconnecting power, and equalizing power for turning. The five basic components are identified as the clutch, gearbox system, differential, final drive, and drive wheels. The clutch connects and disconnects power. The gearbox selects speed and direction. The differential equalizes power for turning. The final drive reduces speed and increases torque. The drive wheels propel the machine. The document then provides more details on the clutch, mechanical transmission, differential, final drive, power take-off systems, tractor wheels, and tires.
Agriculture Engineering-chptr 8
The starting circuit converts electrical energy from the battery into mechanical energy to start the engine. It has four main parts: the battery, starter switch, motor switch, and starting motor. The starting motor drives the flywheel to start the engine and disengages once the engine starts. The ignition circuit uses the ignition coil to transform the battery's low voltage into high voltage sparks to ignite the fuel-air mixture in spark ignition engines. It includes the ignition coil, condenser, distributor, and spark plugs.
Agriculture Engineering-chptr 6
The document discusses two-stroke engines that are commonly used to power small machines for farming and landscaping. It describes the basic cycle of a two-stroke engine, including the intake, compression, power, and exhaust strokes. Key aspects like the inlet, transfer, and exhaust ports are explained. The governor device is also summarized, which automatically controls and regulates the engine speed under varying loads.
Agriculture Engineering-chptr 5
This document summarizes the key components and operation of petrol and diesel fuel systems. It discusses that petrol engines mix fuel and air outside the cylinder, using a spark plug to ignite the mixture. Diesel engines directly inject fuel into the compressed hot air in the cylinder for ignition. The key parts of both systems include the fuel tank, fuel pump, filters and carburetor/injection system. Proper maintenance like cleaning and adjusting these components is important to ensure efficient combustion and engine performance.
Agriculture Engineering-chptr 3
1) Proper engine lubrication is important to prevent friction and wear between moving parts. It is essential to use the correct type and weight of oil and regularly change it as recommended.
2) There are three main types of engine lubrication systems - circulating splash, internal force feed and splash, and full internal force feed. Modern engines primarily use the full internal force feed system.
3) Engine oil serves several critical functions including reducing friction, sealing cylinders, removing heat, cleansing the engine, and absorbing shocks. Proper lubrication helps engines run smoothly and prolongs their lifespan.
Agriculture Engineering-chptr 2
The document provides information about the basic parts of an internal combustion engine. It lists and describes the main components including the cylinder head, valves, camshaft, cylinder block, cylinders, piston, connecting rods, crankshaft, main bearings, flywheel, and timing drives. It explains their functions and how they work together in the engine combustion cycle.
Agriculture Engineering-chpter 1
The document discusses the history and development of farm tractors and mechanization in agriculture. It notes that early farming relied on human and animal muscle, but the development of steel plows and the internal combustion engine led to the invention of the farm tractor in the late 19th century. This mechanization greatly increased farm productivity by reducing labor needs and allowing higher crop yields. The document outlines the benefits of farm mechanization and different types of tractors, including wheeled and track vehicles suited to various crops and field conditions.
Agriculture Marketing (Mkt165) chapter 5-marginal cost & mktg efficiencies
This document discusses marketing costs and efficiencies. It begins by defining marketing costs and listing the various types of costs involved in marketing functions. Population growth, rising input costs, and consumer demand for additional services have contributed to increasing marketing costs. Marketing margin is the portion of what consumers pay for food that goes to marketing firms, and is influenced by factors like time, form, location, and competition. Marketing efficiencies can be improved through operational efficiency to reduce costs and pricing efficiency to allocate resources efficiently. Total marketing costs are calculated by subtracting the farm price from the retail price. Price discrimination allows sellers to set different prices for different customer groups.
Agriculture Marketing (Mkt165) chapter 4-approach to mktg problem
This document discusses approaches to agricultural marketing problems. It identifies several dimensions of the farm marketing problem including difficulties adjusting production to meet changing markets and estimating future prices. It also discusses barriers in the marketing process like separation of location, time and information between producers and consumers. The document then covers functional approaches to marketing like exchange, physical and facilitating functions. It defines concepts like concentration, equalization and dispersion in the exchange process as well as factors enabling decentralized markets. Storage is discussed as interrelated with transportation, processing and risk bearing in food marketing systems.
Agriculture Marketing (Mkt165) chapter 2-problem & characteristic of agri mar...
This document discusses the characteristics and problems of agricultural marketing. It outlines several key differences between agricultural and industrial products, including financial strength, point of production, storage, management efficiencies, promotion, acceptance, and volatility. It then describes several problems in agricultural marketing, such as difficulties adjusting production to changing demand, lack of orientation towards consumers, and high costs of marketing and distribution. Finally, it examines how agricultural marketing responds to consumer goals through understanding tastes and preferences, providing variety, ensuring safety and nutrition, special displays and promotions, and time-saving services.
Agriculture Marketing (Mkt165) chapter 6-involvement ofgovernagencyinagrmktg
The document discusses the roles and involvement of various Malaysian government agencies in agricultural production and marketing. It outlines 6 key roles: [1] Several agencies coordinate the export/import and marketing of various crops; [2] Some provide technical assistance and research to develop the agricultural sector; [3] The government sets minimum support prices for certain crops; [4] It intervenes when prices fall below support limits; [5] Agencies oversee the storage of commodities; [6] Transportation of goods is facilitated through various infrastructure development projects. The major issues addressed include farm prices/incomes, food security, market failures, conflicting policies, and consumer protections.
Agriculture Marketing (Mkt165) chapter 7-mktg of agricultural commodities
The document discusses commodity exchanges and futures markets. It provides definitions for key terms like physical markets, futures markets, commodity exchanges, spot prices, futures prices, bull and bear markets. It describes the functions of the Kuala Lumpur Commodities Exchange in Malaysia and how it facilitates trading of commodities like crude palm oil, tin, and rubber. It also outlines different types of traders in futures markets like speculators and hedgers, and how hedging can help manage price risk for agricultural commodities.
Agriculture Marketing (Mkt165) chapter 8-international marketing
This document discusses several key aspects of international marketing:
1) It defines international marketing and explains that the main difference from domestic marketing is operating in more than one country.
2) It outlines various factors to consider in international marketing, including demographic, economic, natural, technological, political/legal, and social/cultural factors.
3) It discusses market penetration strategy and various methods for entering international markets such as exporting, licensing, franchising, foreign direct investment, and specialized entry modes.
4) It lists questions a company should consider about their ability and readiness before expanding internationally.
Agriculture Marketing (Mkt165) chapter 1-introduction
The document provides an overview of agricultural marketing concepts. It discusses key topics such as the definition of agricultural marketing, farm marketing, the agricultural marketing circle, agribusiness marketing, marketing utilities, marketing concepts, the importance of marketing, the food and fiber system, the development and role of agricultural marketing, and the structure of agricultural products and production. The main purpose is to introduce foundational concepts in agricultural marketing.
More from watak manga pilu (17)
Agriculture Engineering-chptr 9 power transmission
Agriculture Engineering-chptr 9 power transmission
Agriculture Marketing (Mkt165) chapter 5-marginal cost & mktg efficiencies
Agriculture Marketing (Mkt165) chapter 5-marginal cost & mktg efficiencies
Agriculture Marketing (Mkt165) chapter 4-approach to mktg problem
Agriculture Marketing (Mkt165) chapter 4-approach to mktg problem
Agriculture Marketing (Mkt165) chapter 2-problem & characteristic of agri mar...
Agriculture Marketing (Mkt165) chapter 2-problem & characteristic of agri mar...
Agriculture Marketing (Mkt165) chapter 6-involvement ofgovernagencyinagrmktg
Agriculture Marketing (Mkt165) chapter 6-involvement ofgovernagencyinagrmktg
Agriculture Marketing (Mkt165) chapter 7-mktg of agricultural commodities
Agriculture Marketing (Mkt165) chapter 7-mktg of agricultural commodities
Agriculture Marketing (Mkt165) chapter 8-international marketing
Agriculture Marketing (Mkt165) chapter 8-international marketing
Agriculture Marketing (Mkt165) chapter 1-introduction
Agriculture Marketing (Mkt165) chapter 1-introduction
Recently uploaded
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership at Agile Tour Geneve 2024
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-inspired to the data-driven praxis (UA)
Kyiv PMDay 2024 Summer
Website – www.pmday.org
Youtube – https://www.youtube.com/startuplviv
FB – https://www.facebook.com/pmdayconference
Company Valuation webinar series - Tuesday, 4 June 2024
This session provided an update as to the latest valuation data in the UK and then delved into a discussion on the upcoming election and the impacts on valuation. We finished, as always with a Q&A
2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Structural Design Process: Step-by-Step Guide for Buildings
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
一比一原版新西兰奥塔哥大学毕业证（otago毕业证）如何办理
一模一样【微信：A575476】【新西兰奥塔哥大学毕业证（otago毕业证）成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
The Tata Group, a titan of Indian industry, is making waves with its advanced talks with Taiwanese chipmakers Powerchip Semiconductor Manufacturing Corporation (PSMC) and UMC Group. The goal? Establishing a cutting-edge semiconductor fabrication unit (fab) in Dholera, Gujarat. This isn’t just any project; it’s a potential game changer for India’s chipmaking aspirations and a boon for investors seeking promising residential projects in dholera sir.
Visit : https://www.avirahi.com/blog/tata-group-dials-taiwan-for-its-chipmaking-ambition-in-gujarats-dholera/
ModelingMarketingStrategiesMKS.CollumbiaUniversitypdf
Implicitly or explicitly all competing businesses employ a strategy to select a mix
of marketing resources. Formulating such competitive strategies fundamentally
involves recognizing relationships between elements of the marketing mix (e.g.,
price and product quality), as well as assessing competitive and market conditions
(i.e., industry structure in the language of economics).
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka Indian satta Matka Dpboss Matka Kalyan Chart Matka Boss otg matka Guessing Satta 3 Simple Steps To Buy Verified Payoneer Account In 2024
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
Best practices for project execution and delivery
A select set of project management best practices to keep your project on-track, on-cost and aligned to scope. Many firms have don't have the necessary skills, diligence, methods and oversight of their projects; this leads to slippage, higher costs and longer timeframes. Often firms have a history of projects that simply failed to move the needle. These best practices will help your firm avoid these pitfalls but they require fortitude to apply.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
Industrial Tech SW: Category Renewal and Creation
Every industrial revolution has created a new set of categories and a new set of players.
Multiple new technologies have emerged, but Samsara and C3.ai are only two companies which have gone public so far.
Manufacturing startups constitute the largest pipeline share of unicorns and IPO candidates in the SF Bay Area, and software startups dominate in Germany.
Recently uploaded (20)
Organizational Change Leadership Agile Tour Geneve 2024
Organizational Change Leadership Agile Tour Geneve 2024
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.
The Influence of Marketing Strategy and Market Competition on Business Perfor...
The Influence of Marketing Strategy and Market Competition on Business Perfor...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Evgen Osmak: Methods of key project parameters estimation: from the shaman-in...
Company Valuation webinar series - Tuesday, 4 June 2024
Company Valuation webinar series - Tuesday, 4 June 2024
Structural Design Process: Step-by-Step Guide for Buildings
Structural Design Process: Step-by-Step Guide for Buildings
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
Tata Group Dials Taiwan for Its Chipmaking Ambition in Gujarat’s Dholera
ModelingMarketingStrategiesMKS.CollumbiaUniversitypdf
ModelingMarketingStrategiesMKS.CollumbiaUniversitypdf
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Satta Matka
Training my puppy and implementation in this story
Training my puppy and implementation in this story
3 Simple Steps To Buy Verified Payoneer Account In 2024
3 Simple Steps To Buy Verified Payoneer Account In 2024
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Agriculture Engineering-chptr 10
- 1. TRACTOR HYDRAULICS AND 3 POINT LINKAGE
- 3. Operation of a basic hydraulic system The hydraulic system provides the “muscle” for controlling various operations. Hydraulic functions are : a. Steering * b. Brakes * c. Transmission d. Implement control * e. Remote cylinders f. Hydraulic motors Hydraulic fluid serves as power transmitting medium and also the system’s lubricant and coolant
- 4. Hydraulic Steering Hydraulic valve controlled by the steering wheel and hydraulic pistons which assist the steering mechanism in turning the wheels
- 5. Power Brakes Mean that hydraulic force completely controls the braking of the machine
- 6. Implement Control Two types used on tractor : 1.Power lift (Rockshaft) Used in control mounted implements Is controlled either manually using a control lever or automatically by load sensing 2.Remote control Usually placed on a pull type implement to control a function such as raising the plow bottoms
- 7. Raising Plow Using Control Lever The plow hit hard ground and the operator wants to raise it slightly Moves the control lever to the front (1) This pivot the cam follower (2) forward and presses it against rod (3) which opens valve (4) Pressure oil is now admitted to the cylinder, forcing piston (5) to the rear The piston pushes against the shaft arm (6), rotating rockshaft (7) and lift arm (8) upward The lift arm is attached to the plow and so the plow is raised slightly to help it pass through the hard ground
- 8. Automatic Draft Control Raises The Plow The plow hit the hard ground (1) and load control shaft (3) is pulled rearward by draft links (2) As a result, load control arm (12) is pivoted against cam follower (4) The cam follower pushes on the rod (5) which open valve (6) and admits pressure to cylinder (7) The cylinder piston pushes against the arm (8), rotating rockshaft (9) and lift arm (10) upward The lift arm is attached to the plow and so raises the plow slightly to help it pass through the hard ground The regular depth of the plow can be set at the control lever. The plow will stay at this depth unless a signal is given by the load sensing device
- 9. THANK YOU