AAVOS International bvba has a wide range of online process instrumentation for many applications in chemical, petrochemical, oil, gas, food, beverage and pharmaceutical industry.
We will advise you to find the right equipment for your analysis of fluids, gasses and solids.
Process on-line analysers are offered as a solution to the efficiency of plant operation and offer huge paybacks. Our analysers are also applied for monitoring emissions and as safety measurement. http://aavos.be
Viserion raman spectroscopy for biotechnnology and chemistery (2)Remy Carbonnel 🤖
http://indatech.eu/?utm_source=slideshare Viserion® Raman Analyser will improve financial performance with faster process
development times and enhanced process understanding using a QbD approach. It enables a significant reduction of laboratory analyses, fast in-situ analysis of critical process parameters and attributes, and yield optimisation.
Indatech Beyond Spectroscopy is an innovative company, with expertise in optical measurements for on-line monitoring and controlling industrial processes. Raman NIR UV Spectroscopy; Hyperspectral imaging; Spatialy Resolved Spectroscopy
No single liquid chromatography (LC) detector delivers ideal results. Often with LC detectors one analyte responds more strongly than another, or may not respond at all. What is most desired is the ability to accurately measure a wide range of analytes with consistent response simultaneously.
Charged Aerosol detection (CAD) is a mass sensitive technique for determining levels of any non-volatile and many semi-volatile analytes after separation by liquid chromatography. This technique provides consistent analyte response independent of chemical characteristics and gives greater sensitivity over a wider dynamic range. An analytes response does not depend on optical properties, like with UV-vis absorbance, or the ability to ionize, as with mass spectrometry (MS). The presence of chromophoric groups, radiolabels, ionizable moieties, or chemical derivatization is needed for detection.
AAVOS International bvba has a wide range of online process instrumentation for many applications in chemical, petrochemical, oil, gas, food, beverage and pharmaceutical industry.
We will advise you to find the right equipment for your analysis of fluids, gasses and solids.
Process on-line analysers are offered as a solution to the efficiency of plant operation and offer huge paybacks. Our analysers are also applied for monitoring emissions and as safety measurement. http://aavos.be
Viserion raman spectroscopy for biotechnnology and chemistery (2)Remy Carbonnel 🤖
http://indatech.eu/?utm_source=slideshare Viserion® Raman Analyser will improve financial performance with faster process
development times and enhanced process understanding using a QbD approach. It enables a significant reduction of laboratory analyses, fast in-situ analysis of critical process parameters and attributes, and yield optimisation.
Indatech Beyond Spectroscopy is an innovative company, with expertise in optical measurements for on-line monitoring and controlling industrial processes. Raman NIR UV Spectroscopy; Hyperspectral imaging; Spatialy Resolved Spectroscopy
No single liquid chromatography (LC) detector delivers ideal results. Often with LC detectors one analyte responds more strongly than another, or may not respond at all. What is most desired is the ability to accurately measure a wide range of analytes with consistent response simultaneously.
Charged Aerosol detection (CAD) is a mass sensitive technique for determining levels of any non-volatile and many semi-volatile analytes after separation by liquid chromatography. This technique provides consistent analyte response independent of chemical characteristics and gives greater sensitivity over a wider dynamic range. An analytes response does not depend on optical properties, like with UV-vis absorbance, or the ability to ionize, as with mass spectrometry (MS). The presence of chromophoric groups, radiolabels, ionizable moieties, or chemical derivatization is needed for detection.
Varion plus 700 iq nh4 no3 sensor - WTW - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
There is an increasing demand for sensitive, selective, fast and portable detectors for trace components in gases and liquids, e.g. due to increasing concerns about atmospheric pollutants, and a need for improved medical screening capabilities for early detection of diseases and drug abuse. In that context, the project IrSens aims at building a versatile platform based on optical spectroscopy in the near and midinfrared range. Indeed, techniques based on optical absorption offer the possibility to realize a non-invasive and highly sensitive detection platform. It allows to probe the vibrational frequencies of the targeted molecules - most of which are located in the near and mid-infrared range, and to obtain an unambiguous signature of the investigated gas or liquid.
The idea is to create a photonic sensor platform with high performance and reliability which will leverage on the new source, detector and interaction cell technologies to create a new sensor element with vastly improved performance and lowered cost. These improvements will be demonstrated further by the incorporation into two pilot applications, the first one aiming at the demonstration of sensing in the gas phase, the second one in the liquid phase.
Measurement specific to H₂S
No interference from other components
Wide range capability
Measures between 0-50ppb to 0-600ppm
Low volume humidifier
Response times as low as 10 seconds
Electronics temperature compensated
Improves stability
The principle of operation is as follows. A reel of paper tape impregnated with lead acetate is exposed to the gaseous process sample in the sample chamber. Hydrogen sulphide (H2S) in the process sample reacts with the lead acetate, after acidification, to form lead sulphide (PbS), a brown compound that stains the tape.
Oxygen do measurement - WTW - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Process monitoring – feedback for water treatment may improve the efficiency of the treatment process – use fewer chemicals to achieve require effluent emission limits
Measurement of Se, As for compliance with Steam Electric Generating Effluent Guidelines
Monitoring of treatment of wastewater by biological based treatment systems
Measurement of Corrosion Products (e.g. Fe, Ni, Cr and Mn) to improve operating efficiency
Measurement of Elements in Nuclear Power Plant Applications (e.g. Pb, Cu, Fe)
Reduce laboratory analysis costs
Incepted in 1988 by Dr. Lalit Kumar, Laser Science is India's premier distributor of Lasers and Spectroscopy instruments. Our range of products covers scientific and industrial laser systems, spectroscopy, microscopy & imaging systems. We distribute major brands that are reputable global market leaders in their respective fields. These names include Coherent Inc (USA), Femtolasers (Austria), Optronis GmbH, PCO AG (Germany), Beneq (Finland) and many others.
In this recent conference presentation, TRC's Tom Dunder compared various emissions testing strategies to provide the most accurate and useful data to coal-fired facilities undertaking dry sorbent injection studies.
The RA802 Pharmaceutical Analyser combines Renishaw's proprietary LiveTrackTM and StreamLineTM technologies to generate chemical images up to 150 times faster than conventional methods, whilst maintaining focus ? ensuring high quality pharmaceutical tablet imaging.
Spectrolytic has become the pioneer in the supply of cost effective, mid-infrared spectroscopy solutions, offering the lowest cost per measurement point. Spectrolytic’s product portfolio moves the powerful analytical technology of mid-infrared spectroscopy (FTIR) out of the laboratory into the field, providing real time analysis anywhere, anytime.
Varion plus 700 iq nh4 no3 sensor - WTW - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
There is an increasing demand for sensitive, selective, fast and portable detectors for trace components in gases and liquids, e.g. due to increasing concerns about atmospheric pollutants, and a need for improved medical screening capabilities for early detection of diseases and drug abuse. In that context, the project IrSens aims at building a versatile platform based on optical spectroscopy in the near and midinfrared range. Indeed, techniques based on optical absorption offer the possibility to realize a non-invasive and highly sensitive detection platform. It allows to probe the vibrational frequencies of the targeted molecules - most of which are located in the near and mid-infrared range, and to obtain an unambiguous signature of the investigated gas or liquid.
The idea is to create a photonic sensor platform with high performance and reliability which will leverage on the new source, detector and interaction cell technologies to create a new sensor element with vastly improved performance and lowered cost. These improvements will be demonstrated further by the incorporation into two pilot applications, the first one aiming at the demonstration of sensing in the gas phase, the second one in the liquid phase.
Measurement specific to H₂S
No interference from other components
Wide range capability
Measures between 0-50ppb to 0-600ppm
Low volume humidifier
Response times as low as 10 seconds
Electronics temperature compensated
Improves stability
The principle of operation is as follows. A reel of paper tape impregnated with lead acetate is exposed to the gaseous process sample in the sample chamber. Hydrogen sulphide (H2S) in the process sample reacts with the lead acetate, after acidification, to form lead sulphide (PbS), a brown compound that stains the tape.
Oxygen do measurement - WTW - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Process monitoring – feedback for water treatment may improve the efficiency of the treatment process – use fewer chemicals to achieve require effluent emission limits
Measurement of Se, As for compliance with Steam Electric Generating Effluent Guidelines
Monitoring of treatment of wastewater by biological based treatment systems
Measurement of Corrosion Products (e.g. Fe, Ni, Cr and Mn) to improve operating efficiency
Measurement of Elements in Nuclear Power Plant Applications (e.g. Pb, Cu, Fe)
Reduce laboratory analysis costs
Incepted in 1988 by Dr. Lalit Kumar, Laser Science is India's premier distributor of Lasers and Spectroscopy instruments. Our range of products covers scientific and industrial laser systems, spectroscopy, microscopy & imaging systems. We distribute major brands that are reputable global market leaders in their respective fields. These names include Coherent Inc (USA), Femtolasers (Austria), Optronis GmbH, PCO AG (Germany), Beneq (Finland) and many others.
In this recent conference presentation, TRC's Tom Dunder compared various emissions testing strategies to provide the most accurate and useful data to coal-fired facilities undertaking dry sorbent injection studies.
The RA802 Pharmaceutical Analyser combines Renishaw's proprietary LiveTrackTM and StreamLineTM technologies to generate chemical images up to 150 times faster than conventional methods, whilst maintaining focus ? ensuring high quality pharmaceutical tablet imaging.
Spectrolytic has become the pioneer in the supply of cost effective, mid-infrared spectroscopy solutions, offering the lowest cost per measurement point. Spectrolytic’s product portfolio moves the powerful analytical technology of mid-infrared spectroscopy (FTIR) out of the laboratory into the field, providing real time analysis anywhere, anytime.
Photosynthesis active radiation, often abbreviated PAR, designates the spectral range (wave band) of solar
radiation from 400 to 700 nanometers that photosynthetic organisms are able to use in the process of
photosynthesis.
Fischer X-ray Fluorescence (XRF) measuring devices are continuously optimized to achieve higher precision in shorter
measurement times. That is why we have developed our new digital pulse processor DPP+ completely in-house.
The DPP+ is one of the central elements of an X-ray fluorescence spectromete.
www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.
Fluorometer is a benchtop dual-channel fluorometry meticulously crafted to ensure the accurate detection of highly sensitive fluorescence signals while allowing
the quantification of DNA, RNA, and proteins. With precision excitation filters at 460 ± 20 nm and 525 ± 20 nm, it boasts an impressive sensitivity, detecting DNA
at levels as low as 0.5 ng/ul. Provides dual-channel fluorescence capabilities, featuring both blue and green channels for measuring the concentration of the sample.
www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường. Chuyên cung cấp vật tư cho dự án xử lý nước sạch, nước thải và môi trường. Envimart luôn đồng hành, tin cậy với đối tác nhà thầu, nhà tích hợp và người sử dụng.
The Claus process is the industry standard and so the most
significant gas desulfurizing process, recovering elemental sulfur
from gaseous hydrogen sulfide.
The process is commonly referred to as a sulfur recovery unit
(SRU) and is very widely used to produce sulfur from the
hydrogen sulfide found in raw natural gas and from the by-product
sour gases containing hydrogen sulfide derived from refining
petroleum crude oil and other industrial facilities.
There are many hundreds of Claus sulfur recovery units in
operation worldwide.
In fact, the vast majority of the 68,000,000 metric tons of sulfur
produced worldwide in one year is by-product sulfur from
petroleum refining and natural gas processing plants.
The Oxymitter™ 4000 In Situ Oxygen Transmitter is the world's first in situ, zirconium oxide-based oxygen transmitter for flue gas measurement with an explosion-proof rating. These oxygen measurements can be used in a control system or by a boiler operator to fine tune burner fuel/air ratios for maximum efficiency.
Similar to Aavos international - process analysis (20)
We fotograferen, scannen woningen, gebouwen, constructies voor vastgoedmakelaars, architecten, projectontwikkelaars, aannemers,...
Daarnaast maken we 360° scans, virtual tours, grondplannen, luchtfoto's met
drones, mapping en nog veel meer.
Diensten voor vastgoed
Standaard fotografie
3d scans
Virtual tours
2d vloerplannen
Drone foto -en videografie
Virtual staging
Nabewerken foto's
Vastgoed teaser videos
Diensten voor
constructies
Foto en video
3d scans
E57 files
Vloerplannen
Puntenwolken
Mesh bestanden
Trueplan
Luchtfoto's
en meer
XRF Based &Multi-Metals & Continuous Water Analyzer Xact920European Tech Serv
Process monitoring – feedback for water treatment may improve the efficiency of the treatment process – use fewer chemicals to achieve require effluent emission limits
Measurement of Se, As for compliance with Steam Electric Generating Effluent Guidelines
Monitoring of treatment of wastewater by biological based treatment systems
Measurement of Corrosion Products (e.g. Fe, Ni, Cr and Mn) to improve operating efficiency
Measurement of Elements in Nuclear Power Plant Applications (e.g. Pb, Cu, Fe)
Reduce laboratory analysis costs
On-line, in-situ, and at-line monitoring of batch and continuous processes
Displays up to 15 properties at once and measures up to 30 properties per stream
Optical multiplexing capabilities provide analysis of up to 16 process streams using fiber optic or extractive stream switching
Utilizes process-proven ANALECT® Diamond 20™ Transept™ optical head
SpectraRTS™ software engineered exclusively for on-line monitoring, allowing use by engineers, maintenance personnel, and chemists
All ANALECT® lab and on-line systems share core optical technology, allowing instrument-to-instrument calibration transfers
The FROG-5000™ is a portable gas chromatograph (GC) that identifies multiple target volatile organic compounds (VOC) in water, soil, and air. The FROG-5000™ detects chemicals as volatile as vinyl chloride to semi-volatile organics such as naphthalene with lab quality results.
Featuring a MEMS (micro electro-mechanical systems), the FROG-5000™ has an integrated heater for temperature ramp chromatography – ramping the temperature reduces the analysis time and aids in the separation of late eluting compounds. These components combined with an internal PID identify VOCs in ambient air at concentrations as low as 1 part per billion.
Continuous analysis:
Continuous analysis of aerosols on filters for optical and thermal analysis
OC/EC determination:
Real time/online TC/BC/EC/OC and Brc analysis in combination with our Aethalometer AE33
Ease of Use:
No fragile glassware, no catalyst, no gas supplies needed
Rugged, Reliable, automatic:
35 years of published performance, rugged, all-steel construction, unattended operation – 1 month minimum
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
THE GAS CHROMATOGRAPHIC REVOLUTION
FOR ENVIRONMENTAL MONITORING
PyxisGC BTEX is the first and unique gaschromatograph "carrier gas free" for remote BTEX monitoring
in ambient air. PyxisGC BTEX is manufactured by Pollution Analytical Equipment in compliance with
EN14662-3:2015.
"BTEX ambient air analysis: sources, regulations, technologies for controls"European Tech Serv
"BTEX ambient air analysis: sources, regulations, technologies for
controls"
In collaboration with The Council for Research and Experimentation in Agriculture at the Puglia
Regional Environmental Protection Agency (ARPA)
The M1000 operates according to the diffusion principle. The monitor is mounted on a flange which is located at the top of the silo or bin. The gas in the atmosphere of the silo diffuses into the oxygen sensor. Since there is no positive movement of chemical powder to the sensor the sampling gas will not block filters and tubing. The right design and choice of components ensures a long term maintenance free operation.
H2scan’s HY-ALERTA™ 600 Fixed Area Hydrogen Monitor will provide hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit
H2scan’s HY-ALERTA™ 600 Fixed Area Hydrogen Monitor will provide hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit
H2scan’s HY-ALERTA™ 1600 Intrinsically Safe Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit.
H2scan’s HY-ALERTA™ 1600 Intrinsically Safe Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit.
H2scan’s HY-ALERTA™ 2600 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s lower flammability limit.
Technology background HY-ALERTA SAFETY SYSTEMS – HY-ALERTA 2600European Tech Serv
H2scan’s HY-ALERTA™ 2600 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s lower flammability limit.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Fundamentals of Electric Drives and its applications.pptx
Aavos international - process analysis
1. WWW.AAVOS.BE
Your partner in process analysis GAS - LiQUID - SOLIDS
Process analysis | CEMS | CAMS | Environmental | Chemometric Modeling Software
Sample Conditioning Systems | Shelters | Advice | Sales | Integration | Commissioning | Service
AAVOS international
2. 3AAVOS INT.2 AAVOS INT.
Our products:
• UV Spectroscopy
• Photoacoustic Spectroscopy
• (Near) Infrared - FT (N)IR Spectroscopy
• VIS/NIR Photometers
• Mass Spectroscopy
• Raman Photometry and Spectroscopy
• Gas Chromatography
• Tunable laser diode
• Density measurements
• Paper tape analyse
• H2 Detection
• Physical Properties
• Ultrasonic Concentration
• Refractive index
Copyright (c) 2017. All Rights Reserved.
AAVOS International
www.aavos.be | info@aavos.be
Tel: +32 (0) 51 69 78 15
Fax: +32 (0) 51 69 78 17
Aavos International
Sparkevaardekenstraat 3
B-8600 Diksmuide
Aavos International has 25 years of
experience in the world of process
instrumentation.
We offer a complete package of service and
support:
• analysis and advice, we look for the
most efficient and economical solution
• consulting and engineering
• adaption of analysers
• integration (scs, shelters,...)
• commissioning of the equipment
• instructions and data, training and
technical support
• spare parts, repairs and preventive
maintenance
• calibration and validation
we sell and supply according the agreed
contract.
We distribute state of the art systems in
the Benelux, Scandinavian countries and
for some brands we distribute all over
Europe and beyond.
Our trained and experienced technical
staff commissions and services all over
Europe.
We have many references in mid size
businesses and multinationals.
Industries:
Petrochemical
Chemical
Pharmaceutical
Food & Beverage
Polymer
Power Plants
Water treatment
Environmental
Semi-conductor
Steel Plants
Fermentation
Sterilisation
Bio energy
...
AAVOS international
3. 4 CINGO INC. 5CINGO INC.
Analect
Process
FT(N)IR
Analect Lab
RefinIR HT
+ accessories
On-line and at-line FT-NIR and FT-IR process
analysers provide real time multi component
measurements for physical and chemical
properties of liquids, solids and gases. Based
on the rugged Transept interferometer, these
systems have years of proven capability in
harsh process environments.
High pressure and high temperature appli-
cations. Optical multiplexing capabilities: up
to 16 streams. Extractive stream switching:
>50 channels. Spectral range: Mid -IR 7000 to
450 cm-1, Near-IR 12000 to 2500 cm-1 with
fibre optics, 12000 to 1200 cm-1without fibre
optics.
Applications: Reaction monitoring, poly-
mers, stack gas analysis, environmental
protection, composition, RON, MON, Cetane,
Cetanebooster, Benzene, Aromatics, Crude oil,
Catfeed, Lube oil, Additives,...
Uses the same interferometer as the process
instrument. Ideal for developing on-line appli-
cations and calibrations. Seamless calibra-
tion transfer with Analect FT(N)IR process
analyser.
Multiple accessories available: gas cells, Hot-
shot for edible oils and polyols, windows (kBr,
CaF, BaF, ZnS,ZnSe,...), probes, multiplexer,
optical fibres,...
Applications: Reaction monitoring, Grignard
formation, fermentation, raw materials QC,
polymers, composition,...
Process Mass
Spectrometer
FTIR Analyser
continuous air
monitoring
Multiple gases in multiple streams analyser.
Magnetic sector based technology.
MGA1200: Installed in Space Lab and nuclear
submarines. Fast mass spec: response in
less than 1sec for all components. Mass
range: 1-130 AMU, 300ppm - 100% I-scan: up
to 50 components. Result in 10-40sec. Mass-
range: 1-200AMU (300AMU optional). Low
PPB-100%
Applications: EtOx, steel plants, fermentation,
leak detection, naphtha cracker, air separation
plants, environmental protection, ammonia
plants, fuel cells,...
The EVM monitor provides round-the-clock
multi-point continuous air monitoring for a
variety of applications. • Proven, reliable FTIR
technology yields real-time analysis of both
organic and inorganic compounds. • Meas-
ures ambient toxic and pollutant gases with
ppb to % level detection.
A variety of user-configurable alarms for in-
stant warnings of toxic gas levels and system
control. • Capable of monitoring 28 compo-
nents with up to 32 sampling points over a
distance of 300 meters from the monitor. •
Rapid response time – typically 20-200 sec-
onds per stream.
Hyperflux
Lab and
Online Raman
spectroscopy
Analysers
This spectroscopy instrument delivers rapid real-time discrimination across a wide range of chemical
analysis and process control applications.
The patented solution eliminate the trade-off between resolution and throughput to deliver maximum
light to your focal plane. Stokes and anti-Stokes coverage for typical laser excitation wavelenghts
(532, 633, 785 and others) with spectral resolution up to 4 cm-1.
No fixed configuration, we build to your requirements across UV/VIS/NIR. Detect weak signals quick-
ly: fluorescene-free ani-Stokes, low-power illumination.
The hyperflux Pro plus spectrometer configured for process measurements is the highest performing
Raman process device on the market (10* better performances). This analyser uses a proprietary pat-
ented invention called a high-throughput virtual slit (HTVS). A virtual slit is able to achieve the same
high-resolution benefits of an actual slit aperture but maintains nearly 100% light throughput,
eliminating the classic trade-off between throughput and resolution. HTVS technology allows the best
Raman analysis currently acieveable anywhere.
Applications: Pharma, petrochemicals, chemical, polymer, food, semiconductor, others,...
Examples: monitoring of polymer curing processses, following crystallization processes, monitoring
extrusion processes, optimizationof chemical reactions in manufacturing, real-time detection of pro-
cess anomalies and excursions, analysis of fuel mixtures, pigments, paints, measurements of H2S,...
3D chemical
imaging of
solid dosage
formulations
The industry’s only solution for full 3D chemical imaging of solid dosage formulations
The H2Optx mPAT LAB integrates Raman spectroscopy, UV & VIS light spectroscopy, microscopy,
hi-res optical imaging with automated X-Y-Z surface scanning.
This seamless integration, combined with H2Optx robotics & native sampling accessories, enables
novel capabilities for the 3D characterization of powders, tablets, cells, vials, liquids, and emul-
sions.
The H2Optx Pillerator interfaces with the mPAT LAB to provide automated sectioning (5–500µm
layer thickness) of solid dosage formulations. Hyperspectral scans of each layer are used to con-
struct a 3D chemical map and structural analysis of a tablet or solid analyte.
The H2Optx Platerator interfaces with the mPAT LAB to enable fast, multi-axis Raman, UV and hi-
res optical scans of complex powders, solids, and emulsions.
FT(N)IR
MASS
SPECTROMETER
FTIR
AIR
FT(N)IR RAMAN
RAMAN UV-VIS
MICROSCOPY
NEW
NEW
4. 6 CINGO INC. 7CINGO INC.
Concentration
Measurement
with Ultrasonic
Probe
Liquid and Gas
Density & flow
Meter
Determination of the concentration in reflec-
tion of transmission using ultrasonic sound.
Different types of connection availablein Eex-
d-IIC-T6, sanitary version,...
Used in combination with conductivity
measurement for concentration, curves with
changing slope direction.
Applications: Food, polymers, solvents, sodi-
um, hydroxide, acids, HCI, HF,...
The world’s first MicroCoriolis liquid/gas
density meter. Density is determined by
measuring the frequency shift of a small sili-
con resonating structure. The high frequency
resonance inherent in such a lightweight
structure makes it immune to normal vibra-
tions typically found in a plant.
Highest accuracy available on the market:
down to 0.000001 gram/cc for gas, high
precision, small size, ultra fast response time
(<1sec), ATEX systems integration, lower
costs,...
Applications: automotive, consumer, medical,
pharmaceuticals, chemicals, energy, water
treatment, high technology and biotech,...
FTLS UV Gas
and Liquid
Analyser
This uniquely rugged and simple design utilizes a high resolution spectroscopy analyser which
uses ultraviolet energy in different ranges for the determination of the concentrations and the
characterization of the gases and liquids. The measuring principle FTLS (Forier Transform Least
Squares) is based on light absorption according to Beer-Lambert’s law.
High resolution spectrograph | Xenon lamp | UV spectroscopy by FTLS 180nm (160nm) -380nm
Features: Ranges vary from ppb to 100% | +/-1% accuracy, +/-1% repeatability | Modbus serial
communications | Dual isolated 4-20mA outputs | Fast response 2 seconds | Low detection limits
| No chemicals required | No consumables required | Multiple gasses measurable
Applications: Natural gas, LNG/LPG, Upstream, Downstream, Chemical production, Biogas, Re-
former gas, Recycle gas, Fuel gas monitoring, Pipeline protection, Food/Beverage applications,
Steel applications, Pharmaceutical applications, Safety applications,... The AETHER gas analyser
can measure H2S, COS, CO, CO2, CH4, SO2, CS2, Mercaptans, H2S, NH3, NO, NO2, BTEX, CI2, NCI3,
formaldehyde and phenol in process streams. The NAIADE liquids analyser can measure H2S,
NH4+, HC, VOC, TOC, O2, CI2, PH, and much more in process streams.
Gas Analysis
by
Photoacoustic
Spectroscopy
The QCNose and QCBox Photoacoustic analyzers are designed to detect and monitor all key gases
relevant to your research or industrial process. Based on our patented revolutionnary photoacoustic
spectroscopy technology, our instruments are designed to combine performances and ease-of-use:
Latest digital electronics to improve the signal quality
Full range linear calibration (ppb – % range)
Optimized photoacoustic cell according to the applications
User-friendly software
No mechanical moving parts
No high precision optics and mirrors
Not sensitive to vibrations
Not sensitive to temperature changes
On-site calibration without need for returns to manufacturer
Maintenance-free equipment
Based on the Helmholtz resonant cell principle, the Photoacoustic cell expands and pushes the
boundaries of low concentration detection. Based on a simple and robust principle, this technology is
applicable to all fields of trace gas detection.
MicroView
portable and
online
hygrometer
The MicroView On-Line or portable Hygrometer can sample inert and non-reactive gases. It is ideal
for applications where fast speed of response and reliable data collection are important and the
ability to provide audit records is of benefit.
Temperature Controlled Silicon Sensor transfers laboratory accuracy in to the field, offering a
Transfer Standard instrument with unrivalled speed of response. Automatic Push-Purge Sensor
drydown for rapid response and elimination of hysteresis. Graphical display for detailed sample
information and audit capablity. Internal datalog feature stores measurements in the instrument
memory for review at a later time. Atex certified model available.
Applications: Natural Gas and LNG- Refinery recycle gas, HDP production, injection moulding,
Semiconductor industry- Nuclear reactors, Vacuum evacuation & gad refill on oil filled transform-
ers, Permeability testing, Food packaging,...
ELECTRO
CHEMICAL
ULTRA
SONIC
MEMS
CORIOLIS
PHOTO
ACOUSTIC
UV
FTLS
NEW
5. 9CINGO INC.8 AAVOS INT.
Clearview db
VIS/NIR
Photometer
The db photometer is the first commercially available trough dual-beam filter photometer. A primary
attraction of any photometric analyser is it’s low cost. The compromise is usually performance. By
adding the dual-beam feature, the performance drop in comparison to scanning spectrometers is
lessened. Though inexpensive, this photometer has a flexible configuration that meets many online
analysis requirements for liquid and gas process streams.
Benefits: Stable dual-beam design decreases drift due to lampaging -yielding long-term perfor-
mance. Several enclosure options means lowest installation costs. Six filter positions make
multi-parameter analysis a possibility. Optional second sample channel for lower cost per sample
point. Compatible with a wide range of flow cells and insertion probes. Low maintenance. 5000 hour
lamp (~7 months). Dual-beam performance lenghtens time between required probe cleanings.
Applications: Color - ASTM or saybolt in fuels. OH number for polymer reaction end point. Water
content in solvents. Haze in diesel fuel. NaOH in water. Monitoring sterilization with H2O2
Tunable Laser
Online H2S/
H2O Analyser
Process Paper
Tape Gas
Analyser
The laser moisture in natural gas analyser
or hydrogen sulphide in natural gas analyser
uses the stability for accurate low level moni-
toring. The use of a sophisticated laser based
measurement allows long intervals between
calibration, excellent noise performance and
intrinsic linearity, coupled to long operation
life and low maintenance requirements.
Applications: Natural gas monitoring, Refin-
ery products, Petrochemical processes, Gas
processing plants
High sensitivity, exceptionally low-level imput-
ity detection ranges (ppb).
Gas analyser using Chemocasette detection.
Interference free reading.
Fast response.
Can be used for liquids with optional combus-
tion unit.
Applications: Total sulphur, Total NOX or
organic chlorides in gas and hydrocarbons,
Arsine, HCI, Ammonia, Phosgene, HCN, Phos-
phine, H2S,...
FGA 1000 Flare
Gas Analyser
for Total Sulfur
We offer the most versatile Total Sulphur analysers available. The Atom FGA-1000 has the highest
dynamic measurement range of any commercially available analyser without the need for additional
sample valves, calibration gases or system hardware. In addition, the Atom FGA-1000 does not require
installation in a shelter.
The Atom FGA-1000 is an online process analyser utilizing patented Excimer UV Fluorescence (EUVF)
technology to measure Total Sulfur in a variety of applications such as monitoring refinery flare gas
and subsequent sulphur dioxide (SO2) emissions as mandated by the EPA Rule 40 CFR 60,
Subpart Ja.
Single Calibration Range/Lowest cost of operation
Speed of analysis and response time (60-100sec)
Most compact Footprint
Rugged versatile design - No shelter required
Applications: Process Streams, Flare Gas, Stack Gas, Refined Fuels, LPG, Natural,...
Gas Detection
The SXI and SX IR / EX series gas detector / transmitter is a robust detector in an industrial and /
or ATEX housing for detection of different gases.
The housing is made of aluminum, splash proof, HF-shielded (and explosion proof).
These gas detector transmitters have a 24 VDC 3-wire, 4 ... 20mA output signal, allowing them to
be easily connected to standard types of control units such as the M500 Series, M600 Series and
M2000 Series Gas Monitors
We have a complete and clear range of gas detection equipment.
gas detection at production companies, laboratories, gas detection at tanker, gas detection in the
(petro) chemistry ,gas detection at biogas plants, gas detection at power plants, gas detection at
windmills, gas detection in wastewater treatment,...
Applications: O2, CO, CL2, H2S, H2, HCL, NO, NO2, SO2, HF, F2, NH3, CxHx,...
VIS NIR
PHOTOMETER
TDL PAPER
TAPE
ELEKTRO
CHEMICAL/IR
UV
FLUORESCENCE
6. 10 CINGO INC. 11CINGO INC.
Physical
Property
Analysers
The Viscometer: we have a range of on-line viscosity analysers for various applications. They
correlate with the corresponding ASTM laboratory standard measurements. As well as measuring
Newtonian fluids we also have special capillaries that enable us to handle non-Newtonian sam-
ples. Models are also available to handle high pour point streams.
Option: Viscosity index (dual bath) - continuous viscosity measurements at dual temperatures
(typically 40°c & 100°c)
Colour and Opacity Monitor: The Hallikainen colour analyser can measure in accordance with
ASTM, Saybolt and other scales. An opacity version is also available.
Cloud Point Analyser: The cloud point refers to a fuel’s temperature as it begins to thicken and
“cloud” as the temperature drops due to some of the heavier “waxy” components beginning to
precipitate out.
The i-Cloud utilises a measuring cell which minimizes the effects of any dissolved water in the
stream and also features a touch-screen intuitive colour display. As with all our on-linephysical
property analysers, it correlates well with the corresponding ASTM laboratory standard measure-
ments.
Viscosity
Analyser
The VISCO-VP is a new generation of in-line viscosity meter. The VISCO-VP is a torque -oscillating vis-
cosity meter, which measures the drag of a fluid at the surface of the sensor. The sensor oscillates at
its resonance frequency, and the amplitude of the vibration is muted as the viscosity increases. The
viscosity can be calculated out of the energy required to keep the amplitude constant.
Depending on the process fluid and application, there are various models VISCO-VP for the required
measurement range and accuracy.
We also have the VISCO-FT: this is a flow-through model, in which the process fluid flows through a
straight tube with no bend restrictions The sensor can be produced in a variety of materials such as
polycoated for agressive fluids. Advantages: proven in many applications and installations, no moving
parts (torque-oscillating), robust, no maintenance required, fast and accurate measurement, suitable
for low and very high viscosity.
Applications: Chemical, petrochemical, pharmaceutical, food industry. Other applications are possible
with fluids such as: acrilic fibres, textile fibres, black liquor, condensed milk, darcon, lycra, gelatine,
PET, resins poly-isobutyls and printing ink.
Process
Refractometer
The in or online refractometer is a process refractometer and measures concentrations based on
the refractive index of an infrared light beam going from a sapphire prism into the process liquid.
The unique optical principle of the refractometers is patented.
The refractometer has a sensitivity of up to one thousendth of a per cent and is highly stable.
An optional continuous ultrasonic cleaning systems prevents any coating of product on the sur-
face of the measuring prism not adding water, steam or any chemicals into the process liquid.
Advantages: the analyser can measure very low concentration variations at high precisions. The
measurement is not influenced by temperature variations or fixed particles in the process liquid,
by pressure variations, opacity or other interferences. An unique and patented ultrasonic cleaning
system prevents coating of the measuring prism.
Applications: Food and Beverage: measuring soft drinks and juices, beer, applesauce, syrups, al-
cohol-distillation processes, etc. Chemical and Petrochemical: Teflon plunge bath, PVA, ammonia,
cooling- and lubrication liquids, gelatines, urea, DMAC, etc.
Distillator
Vapour
Pressure
Flas point
H2S/TS
measurement
The vapour pressure analyser utilise the jet
orifice measuring principle which enables a
continuous measurement and which cor-
relates well with the corresponding ASTM
laboratory standard measurements.
The Hone 4400 continuous flash point
analyser is very well field proven and uses a
universally accepted catalytic detector. Corre-
lates to ASTM D93 or D56 test methods.
Distillation: the new microprocessor con-
trolled D86 Boilar utilises the latest designs
to incorporate ultrasonic level detection, au-
tomatic barometric compensation and a multi
stream capability which can further meet your
continuous boiling point needs.
The principle of operation is as follows. A reel
of paper tape impregnated with lead acetate
is exposed to the gaseous process sample
in the sample chamber. Hydrogen sulphide
(H2S) in the process sample reacts with
the lead acetate, after acidification, to form
lead sulphide (PbS), a brown compound that
stains the tape.
The higher the concentration of H2S the dark-
er the stain. A focused LED and single photo
detector system continuously measures the
darkening stain and the analyser reports this
as a 4-20mA output of the concentration of
H2S.
Applications: gas, liquids & oil
PHYSICAL
PROPERTIES
PAPER
TAPE
VISCOMETER
IRFT
REFRACTOMETER PHYSICAL
PROPERTIES
NEW
7. 13AAVOS INT.12 AAVOS INT.
Monitoring
water and
process water
On line analyser for the automatic monitoring of water quality and process water.
• High reliability achieved with a new measuring vessel and its associated fiber optics system
• Low cost of ownership : reduced reagents’ consumption, simple and efficient maintenance
• New peristaltic pump : increased accuracy and quick tubing renewal
• Ergonomic design
• Analyser easily configurable
• HI-LO thresholds and sample failure alarms per stream
• Smart and easy to use Windows CE interface
• JBUS RS232 communication protocole (RS485 on option) : measures, end of cycle stop,
stream selection (others on request)
• Journal of events and integrated data logger
• Data retrieval via USB key : text files with Excel spreadsheet compatibility
Applications: Aluminium, ammonium, free chlorine, total chlorine, chlorides, chromium VI, hydra-
zine, iron, manganese, morpoline, peracetic acid, phenols, phosphates, silica, sulfates, hardness,
TH, etc…
Chemometrix
Modelling
Software
Pirouette, our most comprehensive chemometrics package, is designed specially for Windows
2000/XP/Vista/7/8/10. Modelling and prediction tools for data exploration, pattern recognition,
property correlation and mixture analysis methods are implemented in a single program.
Applications: Chemometrics modelling: PLS, PCR, PCA,...
• To explore patterns of association in data
• To track properties of materials on a continuous basis
• To track and use multivariate classification models
Solid Sate
Spectrometer
Irmadillo
The IRmadillo™ FTIR spectrometer is a solid-state instrument certified for use in hazardous and
explosive environments. Mounted directly on, or in-line with, manufacturing vessels, the instru-
ment excels at continuous monitoring of industrial liquids and slurries.
Faster Results as They Happen
No need to wait for your results. With an in situ sensor to monitor your reactions live, the IRmadil-
lo™ tells you what your reactions are doing as they happen, rather than after they happen — and
where ever they happen! No more need to wait for your analysis results to return from remote
sampling techniques such as with HPLC or GC.
Key Qualities & Rugged Components
• Mid-infrared spectrum analysis
• Inert Hastelloy probe
• ATR probe (Diamond available) pH 0-9
• Certified safe for use in hazardous and potentially explosive environments
• Compact and rugged. Body dimensions: 200 x 281 x 310 mm (approx. 8 x 11 x 12 in). Weight
16.5 kg (36.4 lb)
Innovation in Process Monitoring & Control
Standard FTIR analytical instruments are highly sensitive to vibration and ambient temperature—
making them a challenge to use outside or on the manufacturing floor. Keit offers an innovative
solution for continuous monitoring of your processes in real-time over a variety of industrial ap-
plications – from detecting the quantity of water in glycol at a petro-chemical plant to measuring
sugars and alcohol in a fermentation vat.
FTIR for Manufacturing Applications
It opens up new horizons for when and where spectroscopy can be applied.
Fourier Transfer Infrared (FTIR) spectroscopy is a well-established analytical technique in the lab-
oratory, but conventional instruments are bulky and fragile: susceptible to vibration, temperature
changes, and requiring flexible, lossy interconnects to the reaction vessel making the use of them
in the manufacturing floor impractical.
Unlike standard systems, Keit uses a novel optical design with no moving parts. It is impervious to
vibration, weather, and rough operating environments. The dependable IRmadillo™ FTIR spectrom-
eter performs with no remote sampling or long fibre-optic cables making it ideal for manufacturing
environments for process monitoring and control.
The IRmadillo™ FTIR spectrometer tells production and chemical engineers about their processes
at the time of reaction by being mounted directly onto their production equipment rather than
conventional analysis techniques that requires continual sampling and analysis in a remote stable
environment.
The application of FTIR spectroscopy can be successfully used across a variety of manufacturing
industries.
SOLID FTIR
SENSOR
COLOMETRY
TITRIMETRY
CHEMOMETRIX
NEW
8. European Tech Serv NV
Sparkevaardekenstraat 3
8600 Diksmuide
Belgium
Tel. +32 (0)51 81 00 10
Fax +32 (0)51 69 78 17
info@etserv.be
sales@etserv.be
www.etserv.be
COOL RENT SERVICES
Sparkevaardekenstraat 3
8600 DIKSMUIDE
Belgium
Tel: +32 (0)51 50 21 04
Fax : +32 (0)51 50 39 35
info@coolrentservices.be
www.coolrentservices.be
CEM400
The CEM400 is an extractive online gas analysers dedicated to continuous emission monitoring
(CEM). It covers applications like DeNOx systems on power plants, generators, chemical plants,
petro-chemical plants, or biogas reactors.
The CEM400 is based on UV spectroscopy that brings a higher sensitivity and stability
than infra-red systems and also gives the possibility to measure several gases simultaneously,
example: NH3, SO2, NO.
A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all
the gases having a periodic structure like NH3, SO2, CS2 and others.
All the internal gas circuit is heated at 190°C to admit directly hot and humid combustion gas.
No risk of interference with H2O, CO, CO2 or CH4 as all theses gases have no absorbance
on the UV range.
Applications: Liquified petroleum gas, Gasoline, Napthgas/Kerosenes, Crude oil, Fuel oil,...
NH3, SO2, NO, NO2, H2S, CS2, NCL3, benzene, toluene, xylene, acetylene
UV400
ONLINE GAS ANALYSERS
The UV400 WATER ANALYSER, based on a modular concept, allows to monitor simultaneously
many different parameters for waste water or drinking water treatment plants as well as river
monitoring stations. Each parameter corresponds to a specific optical module that can be select-
ed by the user while ordering the analyser, depending on the application.
Mainly based on UV spectroscopy, well known for its stability and low operating cost, the
UV400 can measure parameters like organic matter, ammonia, aromatics hydrocarbons (PAH),
nitrate, colour, hydrogen sulphide and chlorophyll A. Complementary modules allows the measure-
ment of phosphate by colorimetric method and turbidity by a laser diode.
External probes can be added for physicochemical parameters like pH, ORP, dissolved oxygen and
conductivity.
Thanks to its automatic cleaning system and its extremely long life time lamp, the maintenance is
roughly limited to the periodic refill of the inexpensive cleaning solution.
A new web-based interface allows the control and the troubleshooting from internet on laptop,
tablet or i-phone.
AIR QUALITY MONITORING
We are a specialist / distributor in En-
vironmental equipment like particulate
monitors for ambient and stack applica-
tions, particulate samplers for both indu-
strial and occupational hygiene market,
passive sampler for ambient studies.
COOL RENT SERVICES
We are specialized in refrigeration
technology rentals. We offer you the
solution for your cooling problem.
CRS
ONLINE WATER ANALYSERS
NEW
NEW