AAVOS International bvba has a wide range of online process instrumentation for many applications in chemical, petrochemical, oil, gas, food, beverage and pharmaceutical industry.
We will advise you to find the right equipment for your analysis of fluids, gasses and solids.
Process on-line analysers are offered as a solution to the efficiency of plant operation and offer huge paybacks. Our analysers are also applied for monitoring emissions and as safety measurement. http://aavos.be
Viserion raman spectroscopy for biotechnnology and chemistery (2)Remy Carbonnel 🤖
http://indatech.eu/?utm_source=slideshare Viserion® Raman Analyser will improve financial performance with faster process
development times and enhanced process understanding using a QbD approach. It enables a significant reduction of laboratory analyses, fast in-situ analysis of critical process parameters and attributes, and yield optimisation.
Indatech Beyond Spectroscopy is an innovative company, with expertise in optical measurements for on-line monitoring and controlling industrial processes. Raman NIR UV Spectroscopy; Hyperspectral imaging; Spatialy Resolved Spectroscopy
Viserion raman spectroscopy for biotechnnology and chemistery (2)Remy Carbonnel 🤖
http://indatech.eu/?utm_source=slideshare Viserion® Raman Analyser will improve financial performance with faster process
development times and enhanced process understanding using a QbD approach. It enables a significant reduction of laboratory analyses, fast in-situ analysis of critical process parameters and attributes, and yield optimisation.
Indatech Beyond Spectroscopy is an innovative company, with expertise in optical measurements for on-line monitoring and controlling industrial processes. Raman NIR UV Spectroscopy; Hyperspectral imaging; Spatialy Resolved Spectroscopy
No single liquid chromatography (LC) detector delivers ideal results. Often with LC detectors one analyte responds more strongly than another, or may not respond at all. What is most desired is the ability to accurately measure a wide range of analytes with consistent response simultaneously.
Charged Aerosol detection (CAD) is a mass sensitive technique for determining levels of any non-volatile and many semi-volatile analytes after separation by liquid chromatography. This technique provides consistent analyte response independent of chemical characteristics and gives greater sensitivity over a wider dynamic range. An analytes response does not depend on optical properties, like with UV-vis absorbance, or the ability to ionize, as with mass spectrometry (MS). The presence of chromophoric groups, radiolabels, ionizable moieties, or chemical derivatization is needed for detection.
Picarro - A Revolution in Food Safety and Food Fraud DetectionPicarro
Picarro makes the worlds highest performing and easiest to use gas analyzers. Picarro analyzers are revolutionizing the way the farmers, grocers, distributors, and regulators trace where food comes from, identify point of origin, and screen for food fraud and adulteration. Visibility into the authenticity and origin of the food we eat is becoming increasingly important in an era of globalized food distribution.
The Spirant™ BAM automatically measures
and records airborne particulate
concentrations using the beta ray
attenuation method. It is designated by the
US EPA as Federal Equivalent Method for
PM10 and PM2.5 monitoring.
Varion plus 700 iq nh4 no3 sensor - WTW - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Katalog aeroqual uv 1 ozone photometer, jual ozone photometer aeroqual, beli, info, harga, spesifikasi dan review
untuk informasi lebih lanjut kunjungi
www.tridinamika.com
untuk pemesanan dan pertanyaan hubungi via email
sales@tridinamika.com
There is an increasing demand for sensitive, selective, fast and portable detectors for trace components in gases and liquids, e.g. due to increasing concerns about atmospheric pollutants, and a need for improved medical screening capabilities for early detection of diseases and drug abuse. In that context, the project IrSens aims at building a versatile platform based on optical spectroscopy in the near and midinfrared range. Indeed, techniques based on optical absorption offer the possibility to realize a non-invasive and highly sensitive detection platform. It allows to probe the vibrational frequencies of the targeted molecules - most of which are located in the near and mid-infrared range, and to obtain an unambiguous signature of the investigated gas or liquid.
The idea is to create a photonic sensor platform with high performance and reliability which will leverage on the new source, detector and interaction cell technologies to create a new sensor element with vastly improved performance and lowered cost. These improvements will be demonstrated further by the incorporation into two pilot applications, the first one aiming at the demonstration of sensing in the gas phase, the second one in the liquid phase.
MMEA (The Measurement, Monitoring and Environmental Efficiency Assessment) research program final seminar presentation by Assoc. Prof. Juha Toivonen, Tampere University of Technology
The RA802 Pharmaceutical Analyser combines Renishaw's proprietary LiveTrackTM and StreamLineTM technologies to generate chemical images up to 150 times faster than conventional methods, whilst maintaining focus ? ensuring high quality pharmaceutical tablet imaging.
No single liquid chromatography (LC) detector delivers ideal results. Often with LC detectors one analyte responds more strongly than another, or may not respond at all. What is most desired is the ability to accurately measure a wide range of analytes with consistent response simultaneously.
Charged Aerosol detection (CAD) is a mass sensitive technique for determining levels of any non-volatile and many semi-volatile analytes after separation by liquid chromatography. This technique provides consistent analyte response independent of chemical characteristics and gives greater sensitivity over a wider dynamic range. An analytes response does not depend on optical properties, like with UV-vis absorbance, or the ability to ionize, as with mass spectrometry (MS). The presence of chromophoric groups, radiolabels, ionizable moieties, or chemical derivatization is needed for detection.
Picarro - A Revolution in Food Safety and Food Fraud DetectionPicarro
Picarro makes the worlds highest performing and easiest to use gas analyzers. Picarro analyzers are revolutionizing the way the farmers, grocers, distributors, and regulators trace where food comes from, identify point of origin, and screen for food fraud and adulteration. Visibility into the authenticity and origin of the food we eat is becoming increasingly important in an era of globalized food distribution.
The Spirant™ BAM automatically measures
and records airborne particulate
concentrations using the beta ray
attenuation method. It is designated by the
US EPA as Federal Equivalent Method for
PM10 and PM2.5 monitoring.
Varion plus 700 iq nh4 no3 sensor - WTW - Envimart JSC - www.envimart.vn - ĐT: 028 77727979 - sales@envimart.vn - Nền tảng cung cấp thiết bị, vật tư ngành nước và môi trường.
Katalog aeroqual uv 1 ozone photometer, jual ozone photometer aeroqual, beli, info, harga, spesifikasi dan review
untuk informasi lebih lanjut kunjungi
www.tridinamika.com
untuk pemesanan dan pertanyaan hubungi via email
sales@tridinamika.com
There is an increasing demand for sensitive, selective, fast and portable detectors for trace components in gases and liquids, e.g. due to increasing concerns about atmospheric pollutants, and a need for improved medical screening capabilities for early detection of diseases and drug abuse. In that context, the project IrSens aims at building a versatile platform based on optical spectroscopy in the near and midinfrared range. Indeed, techniques based on optical absorption offer the possibility to realize a non-invasive and highly sensitive detection platform. It allows to probe the vibrational frequencies of the targeted molecules - most of which are located in the near and mid-infrared range, and to obtain an unambiguous signature of the investigated gas or liquid.
The idea is to create a photonic sensor platform with high performance and reliability which will leverage on the new source, detector and interaction cell technologies to create a new sensor element with vastly improved performance and lowered cost. These improvements will be demonstrated further by the incorporation into two pilot applications, the first one aiming at the demonstration of sensing in the gas phase, the second one in the liquid phase.
MMEA (The Measurement, Monitoring and Environmental Efficiency Assessment) research program final seminar presentation by Assoc. Prof. Juha Toivonen, Tampere University of Technology
The RA802 Pharmaceutical Analyser combines Renishaw's proprietary LiveTrackTM and StreamLineTM technologies to generate chemical images up to 150 times faster than conventional methods, whilst maintaining focus ? ensuring high quality pharmaceutical tablet imaging.
Spectrolytic has become the pioneer in the supply of cost effective, mid-infrared spectroscopy solutions, offering the lowest cost per measurement point. Spectrolytic’s product portfolio moves the powerful analytical technology of mid-infrared spectroscopy (FTIR) out of the laboratory into the field, providing real time analysis anywhere, anytime.
Photosynthesis active radiation, often abbreviated PAR, designates the spectral range (wave band) of solar
radiation from 400 to 700 nanometers that photosynthetic organisms are able to use in the process of
photosynthesis.
Tornado’s HyperFlux PRO Plus is a complete Raman spectroscopy
system including a proprietary HTVS-enabled spectrometer, a
high-quality stabilized laser, multiple laser safety interlocks,
temperature monitoring and dynamic re-calibration, and
automated system health monitoring and fault detection. This
powerful, reliable, and easy-to-use instrument is contained in
a small, lightweight, cost-effective package which is readily
deployed in both in-line process and laboratory settings.
The PRO Plus is compatible with a broad range of probes,
chemometric software packages, and hazardous environment
confgurations. All these features combine to provide unequaled
Raman sensitivity, quality, and convenience for process and
laboratory applications.
http://www.aavos.be
Winner2308A dry& wet intelligent laser particle size analyzer, adopt the most advanced particle size analysis technology in China, measuring range: liquid 0.01um-2000um, dry 0.1um-2000um, apply to test particle size distribution of powders, emulsion and suspension
Winner Particle Instrument Stock Co.,Ltd. which have been specialized in laser particle size analyzer since 1985, and manufacturer of 1st set laser particle size analyzer in China!
Winner2308A intelligent full automatic wet&dry laser particle size analyzer adopt full MIE scattering principle, measure size is from 0.01um to 2000um(dry 0.1um-2000um), Which offer reliable and repeatable particle size analysis for a diverse range of applications.It use dual-beam& multiple spectral detection systems and side light scatter test technology to significantly improve precision and performance of test, It’s the prior choice for industrial production quality control departments and research institutions.
Fischer X-ray Fluorescence (XRF) measuring devices are continuously optimized to achieve higher precision in shorter
measurement times. That is why we have developed our new digital pulse processor DPP+ completely in-house.
The DPP+ is one of the central elements of an X-ray fluorescence spectromete.
As an leading supplier of Scientific Instruments, Angstrom Advanced has extensive experiences in designing, manufacturing, building and installing a variety of Scientific Instruments; especially Ellipsometer, AA2000 Atomic Force Microscope, AA5000 Multi-function SPM Systems, AA8000 Multi-function SEM System, Gas Generators, X-ray Diffractometer, etc
Winner2000 zde intelligent laser particle size analyzer presentation Cathy Feng
Winner2000ZDE is an intelligent laser particle size analyzer, measure particle size distribution from 0.1-300um, perform auto test, auto alignment, auto water supply, auto drainage, auto bubble removing, auto ultrasonic dispersion, auto cleaning etc., really realize one-key operation. It adopt full built-in sampling system, effectively prevents large particles sedimentation problems in the circulation pipeline, ensure good accuracy. It adopts comprehensive Laser diffraction particle size measurement principle with highly sensitive ring photoelectric detector improving the test accuracy greatly, Original designed unconstrained free fitting software technology, a true reflection of the particle size distribution, to ensure truth and accuracy of the test results. Therefore especially suits the laboratories of enterprises, colleges and universities and research institutes to use.
Similar to Aavos international - process analysis (20)
We fotograferen, scannen woningen, gebouwen, constructies voor vastgoedmakelaars, architecten, projectontwikkelaars, aannemers,...
Daarnaast maken we 360° scans, virtual tours, grondplannen, luchtfoto's met
drones, mapping en nog veel meer.
Diensten voor vastgoed
Standaard fotografie
3d scans
Virtual tours
2d vloerplannen
Drone foto -en videografie
Virtual staging
Nabewerken foto's
Vastgoed teaser videos
Diensten voor
constructies
Foto en video
3d scans
E57 files
Vloerplannen
Puntenwolken
Mesh bestanden
Trueplan
Luchtfoto's
en meer
XRF Based &Multi-Metals & Continuous Water Analyzer Xact920European Tech Serv
Process monitoring – feedback for water treatment may improve the efficiency of the treatment process – use fewer chemicals to achieve require effluent emission limits
Measurement of Se, As for compliance with Steam Electric Generating Effluent Guidelines
Monitoring of treatment of wastewater by biological based treatment systems
Measurement of Corrosion Products (e.g. Fe, Ni, Cr and Mn) to improve operating efficiency
Measurement of Elements in Nuclear Power Plant Applications (e.g. Pb, Cu, Fe)
Reduce laboratory analysis costs
On-line, in-situ, and at-line monitoring of batch and continuous processes
Displays up to 15 properties at once and measures up to 30 properties per stream
Optical multiplexing capabilities provide analysis of up to 16 process streams using fiber optic or extractive stream switching
Utilizes process-proven ANALECT® Diamond 20™ Transept™ optical head
SpectraRTS™ software engineered exclusively for on-line monitoring, allowing use by engineers, maintenance personnel, and chemists
All ANALECT® lab and on-line systems share core optical technology, allowing instrument-to-instrument calibration transfers
The FROG-5000™ is a portable gas chromatograph (GC) that identifies multiple target volatile organic compounds (VOC) in water, soil, and air. The FROG-5000™ detects chemicals as volatile as vinyl chloride to semi-volatile organics such as naphthalene with lab quality results.
Featuring a MEMS (micro electro-mechanical systems), the FROG-5000™ has an integrated heater for temperature ramp chromatography – ramping the temperature reduces the analysis time and aids in the separation of late eluting compounds. These components combined with an internal PID identify VOCs in ambient air at concentrations as low as 1 part per billion.
Continuous analysis:
Continuous analysis of aerosols on filters for optical and thermal analysis
OC/EC determination:
Real time/online TC/BC/EC/OC and Brc analysis in combination with our Aethalometer AE33
Ease of Use:
No fragile glassware, no catalyst, no gas supplies needed
Rugged, Reliable, automatic:
35 years of published performance, rugged, all-steel construction, unattended operation – 1 month minimum
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
At the core of our technology are our next‑generation air quality monitors - the Clarity Node and Node-S. These nimble monitors are configured on our web-based deployment tool and installed in a matter of minutes. Hundreds to thousands of devices work together to form a scalable network of high density air quality measurement points.
THE GAS CHROMATOGRAPHIC REVOLUTION
FOR ENVIRONMENTAL MONITORING
PyxisGC BTEX is the first and unique gaschromatograph "carrier gas free" for remote BTEX monitoring
in ambient air. PyxisGC BTEX is manufactured by Pollution Analytical Equipment in compliance with
EN14662-3:2015.
"BTEX ambient air analysis: sources, regulations, technologies for controls"European Tech Serv
"BTEX ambient air analysis: sources, regulations, technologies for
controls"
In collaboration with The Council for Research and Experimentation in Agriculture at the Puglia
Regional Environmental Protection Agency (ARPA)
The M1000 operates according to the diffusion principle. The monitor is mounted on a flange which is located at the top of the silo or bin. The gas in the atmosphere of the silo diffuses into the oxygen sensor. Since there is no positive movement of chemical powder to the sensor the sampling gas will not block filters and tubing. The right design and choice of components ensures a long term maintenance free operation.
H2scan’s HY-ALERTA™ 600 Fixed Area Hydrogen Monitor will provide hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit
H2scan’s HY-ALERTA™ 600 Fixed Area Hydrogen Monitor will provide hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit
H2scan’s HY-ALERTA™ 1600 Intrinsically Safe Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit.
H2scan’s HY-ALERTA™ 1600 Intrinsically Safe Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s low flammability limit.
H2scan’s HY-ALERTA™ 2600 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s lower flammability limit.
Technology background HY-ALERTA SAFETY SYSTEMS – HY-ALERTA 2600European Tech Serv
H2scan’s HY-ALERTA™ 2600 Explosion Proof Area Hydrogen Monitor provides hydrogen-specific leak detection and measurement for hydrogen concentrations as low as 4000 ppm and can be scaled to any concentration up to 5% hydrogen by volume, a range representing 10% to 125% of hydrogen’s lower flammability limit.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Student information management system project report ii.pdf
Aavos international - process analysis
1. WWW.AAVOS.BE
Your partner in process analysis GAS - LiQUID - SOLIDS
Process analysis | CEMS | CAMS | Environmental | Chemometric Modeling Software
Sample Conditioning Systems | Shelters | Advice | Sales | Integration | Commissioning | Service
your partner in process analysis
2. Industries:
3AAVOS INT.2 AAVOS INT.
• UV Spectroscopy
• Photoacoustic Spectroscopy
• (Near) Infrared - FT (N)IR Spectroscopy
• VIS/NIR Photometers
• Mass Spectroscopy
• Raman Photometry and Spectroscopy
• Gas Chromatography
• Tunable laser diode
• Density measurements
• Paper tape analyses
• H2 Detection
• Physical Properties
• Ultrasonic Concentration
• Refractive index
• ...
Copyright (c) 2017. All Rights Reserved.
AAVOS International
www.aavos.be | info@aavos.be
Tel: +32 (0) 51 69 78 15
Fax: +32 (0) 51 69 78 17
Aavos International
Sparkevaardekenstraat 3
B-8600 Diksmuide
Aavos International has 25 years of
experience in the world of process
instrumentation.
We offer a complete package of service and
support:
• analysis and advice, we look for the
most efficient and economical solution
• consulting and engineering
• adaption of analysers
• integration (scs, shelters,...)
• commissioning of the equipment
• instructions and data, training and tech-
nical support
• spare parts, repairs and preventive
maintenance
• calibration and validation
We sell and supply according the agreed
contract.
We distribute state of the art systems in
the Benelux, Scandinavian countries and
for some brands we distribute all over
Europe and beyond.
Our trained and experienced technical
staff commissions and services all over
Europe.
We have many references in mid-size bu-
sinesses and multinationals.
Petroleum
Petrochemical
Chemical
Pharmaceutical
Food & Beverage
Polymer
Power Plants
Water treatment
Environmental
Semi-conductor
Steel Plants
Fermentation
Sterilization
Bio energy
...
Our products:
your partner in process analysis
3. 4 CINGO INC. 5CINGO INC.
Analect Lab
RefinIR HT
+ accessories
On-line and at-line FT-NIR and FT-IR process
analyzers provide real time multi component
measurements for physical and chemical
properties of liquids, solids and gases. Based
on the rugged Transept interferometer, these
systems have years of proven capability in
harsh process environments.
High pressure and high temperature applica-
tions. Optical multiplexing capabilities: up to
16 streams. Extractive stream switching: >50
channels. Spectral range: Mid-IR 7400 to 450
cm-1, Near-IR 12000 to 2500 cm-1 with fibre
optics, 12000 to 1200 cm-1without fiber op-
tics. Max. res.: 1.5cm-1.
Applications: Reaction monitoring, polymers,
stack gas analysis, environmental protection,
composition, RON, MON, Cetane, Cetaneboost-
er, Benzene, Aromatics, Crude oil, Catfeed,
Lube oil, Additives,...
The new ANALECT ®RefinIR™ is a fully
integrated laboratory autosampler and FTIR
instrument. It is designed to measure liquid
hydrocarbons including gasoline, diesel and
crude oils in a single autosampler. Determina-
tion of physical properties and chemical com-
position with the touch of a button.
Uses the same interferometer as the process
instrument. Ideal for developing on-line appli-
cations and calibrations. Seamless calibration
transfer with Analect FT(N)IR process analyz-
er.
Multiple accessories available: gas cells, Hot-
shot for edible oils and polyols, windows (kBr,
CaF, BaF, ZnS,ZnSe,...), probes, multiplexer, op-
tical fibers,...
Applications: Grignard formation, fermenta-
tion, raw materials QC, polymers, composi-
tion,...
Process Mass
Spectrometer
FTIR Analyzer
continuous air
monitoring
Multiple gases in multiple streams analyser.
Magnetic sector based technology.
MGA1200: Installed in Space Lab and nuclear
submarines. Fast mass spec: response in less
than 1sec for all components. Mass range:
1-130 AMU, 300ppm - 100% I-scan: up to 50
components. Result in 10-40sec. Mass-range:
1-200AMU (300AMU optional). Low PPB-100%
Applications: EtOx, steel plants, fermentation,
leak detection, naphtha cracker, air separation
plants, environmental protection, ammonia
plants, fuel cells,...
The EVM monitor provides round-the-clock
multi-point continuous air monitoring for a
variety of applications. • Proven, reliable FTIR
technology yields real-time analysis of both or-
ganic and inorganic compounds. • Measures
ambient toxic and pollutant gases with ppb to
% level detection.
A variety of user-configurable alarms for in-
stant warnings of toxic gas levels and system
control. • Capable of monitoring 28 compo-
nents with up to 32 sampling points over a dis-
tance of 300 meters from the monitor. • Rapid
response time – typically 20-200 seconds per
stream.
Hyperflux
Lab and
Online Raman
spectroscopy
Analysers
This spectroscopy instrument delivers rapid real-time discrimination across a wide range of chemical
analysis and process control applications.
The patented solution eliminate the trade-off between resolution and throughput to deliver maximum
light to your focal plane. Stokes and anti-Stokes coverage for typical laser excitation wavelengths (532,
633, 785 and others) with spectral resolution up to 4 cm-1.
No fixed configuration, we build to your requirements across UV/VIS/NIR. Detect weak signals quickly:
fluorescene-free ani-Stokes, low-power illumination.
The hyperflux Pro plus spectrometer configured for process measurements is the highest performing
Raman process device on the market (10* better performances). This analyser uses a proprietary pat-
ented invention called a high-throughput virtual slit (HTVS). A virtual slit is able to achieve the same
high-resolution benefits of an actual slit aperture but maintains nearly 100% light throughput,
eliminating the classic trade-off between throughput and resolution. HTVS technology allows the best
Raman analysis currently achieveable anywhere.
Applications: Pharma, petrochemicals, chemical, polymer, food, semiconductor, others,...
Examples: monitoring of polymer curing processes, following crystallization processes, monitoring ex-
trusion processes, optimization of chemical reactions in manufacturing, real-time detection of process
anomalies and excursions, analysis of fuel mixtures, pigments, paints, measurements of H2S,...
3D chemical
imaging of
solid dosage
formulations
The industry’s only solution for full 3D chemical imaging of solid dosage formulations
The H2Optx mPAT LAB integrates Raman spectroscopy, UV & VIS light spectroscopy, microscopy,
hi-res optical imaging with automated X-Y-Z surface scanning. This seamless integration, combined
with H2Optx robotics & native sampling accessories, enables novel capabilities for the 3D charac-
terization of powders, tablets, cells, vials, liquids, and emulsions.
The H2Optx Pillerator interfaces with the mPAT LAB to provide automated sectioning (5–500µm
layer thickness) of solid dosage formulations. Hyperspectral scans of each layer are used to con-
struct a 3D chemical map and structural analysis of a tablet or solid analyte.
The H2Optx Platerator interfaces with the mPAT LAB to enable fast, multi-axis Raman, UV and hi-res
optical scans of complex powders, solids, and emulsions.
Applications: Ideal for pharmaceutical and chemical industry.
Analect
Process
FT(N)IR
MASS
SPECTROMETER
FTIR
AIR
FTIR RAMAN
RAMAN UV-VIS
MICROSCOPY
NEW
NEW
FT(N)IR
NEW
4. 6 CINGO INC. 7CINGO INC.
Concentration
Measurement
with Ultrasonic
Probe
Liquid and Gas
Density & flow
Meter
Determination of the concentration in reflec-
tion of transmission using ultrasonic sound.
Different types of connection available in Eex-
d-IIC-T6, sanitary version,...
Used in combination with conductivity meas-
urement for concentration, curves with chang-
ing slope direction. Also used for TDS/TSS,
Alcohol, Plato, Brix. Measuring in clear/turbid
liquids and slurries.
Applications: Building Materials, Chemicals,
Dredging, Food and Beverages, Mining and
Mineral Processing, Oil and Gas, Pulp and Pa-
per, Semiconductor and Flat Panel, Wastewa-
ter Management.
The world’s first MicroCoriolis liquid/gas den-
sity meter. Density is determined by measuring
the frequency shift of a small silicon resonat-
ing structure. The high frequency resonance
inherent in such a lightweight structure makes
it immune to normal vibrations typically found
in a plant.
Highest accuracy available on the market:
down to 0.000001 gram/cc for gas, high pre-
cision, small size, ultra-fast response time
(<1sec), ATEX systems integration, lower
costs,...
Applications: automotive, consumer, medical,
pharmaceuticals, chemicals, energy, water
treatment, high technology and biotech,...
FTLS UV Gas
and Liquid
Analyser
This uniquely rugged and simple design utilizes a high resolution spectroscopy analyser which uses
ultraviolet energy in different ranges for the determination of the concentrations and the character-
ization of the gases and liquids. The measuring principle FTLS (Fourier Transform Least Squares)
is based on light absorption according to Beer-Lambert’s law.
High resolution spectrograph | Xenon lamp | UV spectroscopy by FTLS 180nm (160nm) -380nm
Features: Ranges vary from ppb to 100% | +/-1% accuracy, +/-1% repeatability | Modbus serial com-
munications | Dual isolated 4-20mA outputs | Fast response 2 seconds | Low detection limits | No
chemicals required | No consumables required | Multiple gasses measurable
Applications: Natural gas, LNG/LPG, Upstream, Downstream, Chemical production, Biogas, Reform-
er gas, Recycle gas, Fuel gas monitoring, Pipeline protection, Food/Beverage applications, Steel
applications, Pharmaceutical applications, Safety applications,... The AETHER gas analyser can
measure H2S, COS, CO, CO2, CH4, SO2, CS2, Mercaptans, H2S, NH3, NO, NO2, BTEX, CI2, NCI3, for-
maldehyde and phenol in process streams. The NAIADE liquids analyser can measure H2S, NH4+,
HC, VOC, TOC, O2, CI2, PH, and much more in process streams.
Gas Analysis
by
Photoacoustic
Spectroscopy
The QCNose and QCBox Photoacoustic analyzers are designed to detect and monitor all key gases
relevant to your research or industrial process. Based on our patented revolutionary photoacoustic
spectroscopy technology, our instruments are designed to combine performances and ease-of-use:
Latest digital electronics to improve the signal quality
Full range linear calibration (ppb – % range)
Optimized photoacoustic cell according to the applications
User-friendly software
No mechanical moving parts
No high precision optics and mirrors
Not sensitive to vibrations
Not sensitive to temperature changes
On-site calibration without need for returns to manufacturer
Maintenance-free equipment
Based on the Helmholtz resonant cell principle, the Photoacoustic cell expands and pushes the bound-
aries of low concentration detection. Based on a simple and robust principle, this technology is appli-
cable to all fields of trace gas detection.
MicroView
portable and
online
hygrometer
The MicroView On-Line or portable Hygrometer can sample inert and non-reactive gases. It is ideal
for applications where fast speed of response and reliable data collection are important and the
ability to provide audit records is of benefit.
Temperature Controlled Silicon Sensor transfers laboratory accuracy in to the field, offering a Trans-
fer Standard instrument with unrivalled speed of response. Automatic Push-Purge Sensor drydown
for rapid response and elimination of hysteresis. Graphical display for detailed sample information
and audit capability. Internal datalog feature stores measurements in the instrument memory for
review at a later time. Atex certified model available.
Applications: Natural Gas and LNG- Refinery recycle gas, HDP production, injection moulding, Sem-
iconductor industry- Nuclear reactors, Vacuum evacuation & gad refill on oil filled transformers,
Permeability testing, Food packaging,...
ELECTRO
CHEMICAL
ULTRA
SONIC
MEMS
CORIOLIS
PHOTO
ACOUSTIC
UV
FTLS
NEW
NEW
5. 9AAVOS INT.8 AAVOS INT.
Clearview db
VIS/NIR
Photometer
The db photometer is the first commercially available through dual-beam filter photometer. A primary
attraction of any photometric analyser is it’s low cost. The compromise is usually performance. By
adding the dual-beam feature, the performance drop in comparison to scanning spectrometers is
lessened. Though inexpensive, this photometer has a flexible configuration that meets many online
analysis requirements for liquid and gas process streams.
Benefits: Stable dual-beam design decreases drift due to lampaging -yielding long-term performance.
Several enclosure options means lowest installation costs. Six filter positions make
multi-parameter analysis a possibility. Optional second sample channel for lower cost per sample
point. Compatible with a wide range of flow cells and insertion probes. Low maintenance. 5000 hour
lamp (~7 months). Dual-beam performance lengthens time between required probe cleanings.
Applications: Color - ASTM or saybolt in fuels. OH number for polymer reaction end point. Water con-
tent in solvents. Haze in diesel fuel. NaOH in water. Monitoring sterilization with H2O2
Tunable Laser
Online H2S/
H2O Analyser
Process Paper
Tape Gas
Analyser
The laser moisture in natural gas analyser
or hydrogen sulphide in natural gas analyser
uses the stability for accurate low level moni-
toring. The use of a sophisticated laser based
measurement allows long intervals between
calibration, excellent noise performance and
intrinsic linearity, coupled to long operation
life and low maintenance requirements.
Applications: Natural gas monitoring, Refinery
products, Petrochemical processes, Gas pro-
cessing plants.
Future aplications: CO2 / O2 TDL Gas Analyser
(2018)
High sensitivity, exceptionally low-level imput-
ity detection ranges (ppb).
Gas analyser using Chemocasette detection.
Interference free reading.
Fast response.
Can be used for liquids with optional combus-
tion unit.
Applications: Total sulphur, Total NOX or or-
ganic chlorides in gas and hydrocarbons,
Arsine, HCI, Ammonia, Phosgene, HCN, Phos-
phine, H2S,...
Also available for lab-applications
FGA 1000 Flare
Gas Analyser
for Total Sulfur
We offer the most versatile Total Sulphur analysers available. The Atom FGA-1000 has the highest
dynamic measurement range of any commercially available analyser without the need for additional
sample valves, calibration gases or system hardware. In addition, the Atom FGA-1000 does not require
installation in a shelter.
The Atom FGA-1000 is an online process analyser utilizing patented Excimer UV Fluorescence (EUVF)
technology to measure Total Sulfur in a variety of applications such as monitoring refinery flare gas and
subsequent sulphur dioxide (SO2) emissions as mandated by the EPA Rule 40 CFR 60,
Subpart Ja.
Single Calibration Range/Lowest cost of operation
Speed of analysis and response time (60-100sec)
Most compact Footprint
Rugged versatile design - No shelter required
Applications: Process Streams, Flare Gas, Stack Gas, Refined Fuels, LPG, Natural,...
Gas Detection
The SXI and SX IR / EX series gas detector / transmitter is a robust detector in an industrial and /
or ATEX housing for detection of different gases.
The housing is made of aluminum, splash proof, HF-shielded (and explosion proof).
These gas detector transmitters have a 24 VDC 3-wire, 4 ... 20mA output signal, allowing them to
be easily connected to standard types of control units such as the M500 Series, M600 Series and
M2000 Series Gas Monitors
We have a complete and clear range of gas detection equipment.
gas detection at production companies, laboratories, gas detection at tanker, gas detection in the
(petro) chemistry ,gas detection at biogas plants, gas detection at power plants, gas detection at
windmills, gas detection in wastewater treatment,...
Applications: O2, CO, CL2, H2S, H2, HCL, NO, NO2, SO2, HF, F2, NH3, CxHx,...
VIS NIR
PHOTOMETER
TDL PAPER
TAPE
IR -
ELEKTROCHEMICAL
UV
FLUORESCENCE
NEW
6. 10 CINGO INC. 11CINGO INC.
The Viscometer: we have a range of on-line viscosity analysers for various applications. They corre-
late with the corresponding ASTM laboratory standard measurements. As well as measuring New-
tonian fluids we also have special capillaries that enable us to handle non-Newtonian samples.
Models are also available to handle high pour point streams.
Option: Viscosity index (dual bath) - continuous viscosity measurements at dual temperatures (typ-
ically 40°c & 100°c)
Colour and Opacity Monitor: The Hallikainen colour analyser can measure in accordance with ASTM,
Saybolt and other scales. An opacity version is also available.
Cloud Point Analyser: The cloud point refers to a fuel’s temperature as it begins to thicken and
“cloud” as the temperature drops due to some of the heavier “waxy” components beginning to
precipitate out.
The i-Cloud utilizes a measuring cell which minimizes the effects of any dissolved water in the
stream and also features a touch-screen intuitive colour display. As with all our on-line physical
property analysers, it correlates well with the corresponding ASTM laboratory standard measure-
ments.
Viscosity
Analyser
The VISCO-VP is a new generation of in-line viscosity meter. The VISCO-VP is a torque -oscillating vis-
cosity meter, which measures the drag of a fluid at the surface of the sensor. The sensor oscillates at
its resonance frequency, and the amplitude of the vibration is muted as the viscosity increases. The
viscosity can be calculated out of the energy required to keep the amplitude constant.
Depending on the process fluid and application, there are various models VISCO-VP for the required
measurement range and accuracy.
We also have the VISCO-FT: this is a flow-through model, in which the process fluid flows through a
straight tube with no bend restrictions The sensor can be produced in a variety of materials such as
polycoated for aggressive fluids. Advantages: proven in many applications and installations, no moving
parts (torque-oscillating), robust, no maintenance required, fast and accurate measurement, suitable
for low and very high viscosity.
Applications: Chemical, petrochemical, pharmaceutical, food industry. Other applications are possible
with fluids such as: acrylic fibres, textile fibres, black liquor, condensed milk, darcon, lycra, gelatine, PET,
resins poly-isobutyls and printing ink.
Process
Refractometer
The in or online refractometer is a process refractometer and measures concentrations based on
the refractive index of an infrared light beam going from a sapphire prism into the process liquid.
The unique optical principle of the refractometers is patented.
The refractometer has a sensitivity of up to one thousendth of a per cent and is highly stable.
An optional continuous ultrasonic cleaning systems prevents any coating of product on the surface
of the measuring prism not adding water, steam or any chemicals into the process liquid.
Advantages: the analyser can measure very low concentration variations at high precisions. The
measurement is not influenced by temperature variations or fixed particles in the process liquid,
by pressure variations, opacity or other interferences. An unique and patented ultrasonic cleaning
system prevents coating of the measuring prism.
Applications: Food and Beverage: measuring soft drinks and juices, beer, applesauce, syrups, al-
cohol-distillation processes, etc. Chemical and Petrochemical: Teflon plunge bath, PVA, ammonia,
cooling- and lubrication liquids, gelatines, urea, DMAC, etc.
Distillator
Vapour
Pressure
Flash point
H2S/TS
measurement
The vapour pressure analyser utilize the jet or-
ifice measuring principle which enables a con-
tinuous measurement and which correlates
well with the corresponding ASTM laboratory
standard measurements.
The Hone 4400 continuous flash point analys-
er is very well field proven and uses a univer-
sally accepted catalytic detector. Correlates to
ASTM D93 or D56 test methods.
Distillation: the new microprocessor con-
trolled D86 Boilar utilizes the latest designs
to incorporate ultrasonic level detection, au-
tomatic barometric compensation and a multi
stream capability which can further meet your
continuous boiling point needs.
The only solution for low ppm/ppb H2S
meassurements. The principle of operation is
as follows. A reel of paper tape impregnated
with lead acetate is exposed to the gaseous
process sample in the sample chamber. Hy-
drogen sulphide (H2S) in the process sam-
ple reacts with the lead acetate, after acidifi-
cation, to form lead sulphide (PbS), a brown
compound that stains the tape.
The higher the concentration of H2S the dark-
er the stain. A focused LED and single photo
detector system continuously measures the
darkening stain and the analyser reports this
as a 4-20mA output of the concentration of
H2S.
Applications: gas, liquids & oil
PAPER
TAPE
PHYSICAL
PROPERTIES
Physical
Property
Analysers
VISCOMETER
IRFT
REFRACTOMETER PHYSICAL
PROPERTIES
NEW
NEW
7. 13AAVOS INT.12 AAVOS INT.
Monitoring
water and
process water
On line analyser for the automatic monitoring of water quality and process water.
• High reliability achieved with a new measuring vessel and its associated fiber optics system
• Low cost of ownership : reduced reagents’ consumption, simple and efficient maintenance
• New peristaltic pump : increased accuracy and quick tubing renewal
• Ergonomic design
• Analyser easily configurable
• HI-LO thresholds and sample failure alarms per stream
• Smart and easy to use Windows CE interface
• JBUS RS232 communication protocole (RS485 on option) : measures, end of cycle stop, stream
selection (others on request)
• Journal of events and integrated data logger
• Data retrieval via USB key : text files with Excel spreadsheet compatibility
Applications: Aluminium, ammonium, free chlorine, total chlorine, chlorides, chromium VI, hydrazine,
iron, manganese, morpoline, peracetic acid, phenols, phosphates, silica, sulfates, hardness, TH, etc…
Chemometrix
Modelling
Software
Pirouette, our most comprehensive chemometrics package, is designed specially for Windows
2000/XP/Vista/7/8/10. Modelling and prediction tools for data exploration, pattern recognition,
property correlation and mixture analysis methods are implemented in a single program.
Applications: Chemometrics modelling: PLS, PCR, PCA,...
• To explore patterns of association in data
• To track properties of materials on a continuous basis
• To track and use multivariate classification models
Solid Sate
Spectrometer
Irmadillo
The IRmadillo™ FTIR spectrometer is a solid-state instrument certified for use in hazardous and
explosive environments. Mounted directly on, or in-line with, manufacturing vessels, the instrument
excels at continuous monitoring of industrial liquids and slurries.
Faster Results as They Happen
No need to wait for your results. With an in situ sensor to monitor your reactions live, the IRmadillo™
tells you what your reactions are doing as they happen, rather than after they happen — and where
ever they happen! No more need to wait for your analysis results to return from remote sampling
techniques such as with HPLC or GC.
Key Qualities & Rugged Components
• Mid-infrared spectrum analysis
• Inert Hastelloy probe
• ATR probe (Diamond available) pH 0-9
• Certified safe for use in hazardous and potentially explosive environments
• Compact and rugged. Body dimensions: 200 x 281 x 310 mm (approx. 8 x 11 x 12 in). Weight
16.5 kg (36.4 lb)
Innovation in Process Monitoring & Control
Standard FTIR analytical instruments are highly sensitive to vibration and ambient temperature—
making them a challenge to use outside or on the manufacturing floor. Keit offers an innovative
solution for continuous monitoring of your processes in real-time over a variety of industrial applica-
tions – from detecting the quantity of water in glycol at a petro-chemical plant to measuring sugars
and alcohol in a fermentation vat.
FTIR for Manufacturing Applications
It opens up new horizons for when and where spectroscopy can be applied.
Fourier Transfer Infrared (FTIR) spectroscopy is a well-established analytical technique in the la-
boratory, but conventional instruments are bulky and fragile: susceptible to vibration, temperature
changes, and requiring flexible, lossy interconnects to the reaction vessel making the use of them
in the manufacturing floor impractical.
Unlike standard systems, Keit uses a novel optical design with no moving parts. It is impervious
to vibration, weather, and rough operating environments. The dependable IRmadillo™ FTIR spectro-
meter performs with no remote sampling or long fibre-optic cables making it ideal for manufactur-
ing environments for process monitoring and control.
The IRmadillo™ FTIR spectrometer tells production and chemical engineers about their processes
at the time of reaction by being mounted directly onto their production equipment rather than
conventional analysis techniques that requires continual sampling and analysis in a remote stable
environment.
The application of FTIR spectroscopy can be successfully used across a variety of manufacturing
industries.
SOLID FTIR
SENSOR
COLOMETRY
TITRIMETRY
CHEMOMETRIX
NEW
NEW
8. European Tech Serv NV
Sparkevaardekenstraat 3
8600 Diksmuide
Belgium
Tel. +32 (0)51 81 00 10
Fax +32 (0)51 69 78 17
info@etserv.be
sales@etserv.be
www.etserv.be
COOL RENT SERVICES
Sparkevaardekenstraat 3
8600 DIKSMUIDE
Belgium
Tel: +32 (0)51 50 21 04
Fax : +32 (0)51 50 39 35
info@coolrentservices.be
www.coolrentservices.be
CEM/EXM400
CEM/EXM500
These analysers are extractive online gas analysers dedicated to continuous emission monitoring
(CEM). It covers applications like DeNOx systems on power plants, generators, chemical plants,
petro-chemical plants, or biogas reactors.
They are based on UV spectroscopy that brings a higher sensitivity and stability than infra-red
systems and also gives the possibility to measure several gases simultaneously, example: NH3,
SO2, NO.
A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all
the gases having a periodic structure like NH3, SO2, CS2 and others.
All the internal gas circuit is heated at 190°C to admit directly hot and humid combustion gas.
No risk of interference with H2O, CO, CO2 or CH4 as all theses gases have no absorbance
on the UV range.
Applications: Liquified petroleum gas, Gasoline, Napthgas/Kerosene’s, Crude oil, Fuel oil,...
NH3, SO2, NO, NO2, H2S, CS2, NCL3, benzene, toluene, xylene, acetylene
UV300
UV400
UV500
EL300
ONLINE WATER ANALYSERS
The WATER ANALYSERS, based on a modular concept, allows to monitor simultaneously many
different parameters (up to 16) for waste water or drinking water treatment plants as well as river
monitoring stations. Each parameter corresponds to a specific optical module that can be selected
by the user while ordering the analyser, depending on the application.
Mainly based on UV spectroscopy, well known for its stability and low operating cost, the
analysers can measure parameters like COD, organic matter, ammonia, aromatics hydrocarbons
(PAH),
nitrate, colour, hydrogen sulphide and chlorophyll A. Complementary modules allows the measure-
ment of phosphate by colorimetric method and turbidity by a laser diode.
External probes can be added for physicochemical parameters like pH, ORP, dissolved oxygen and
conductivity.
Thanks to its automatic cleaning system and its extremely long life time lamp, the maintenance is
roughly limited to the periodic refill of the inexpensive cleaning solution.
A new web-based interface allows the control and the troubleshooting from internet on laptop,
tablet or i-phone.
AIR QUALITY MONITORING
We are a specialist / distributor in En-
vironmental equipment like particulate
monitors for ambient and stack applica-
tions, particulate samplers for both indu-
strial and occupational hygiene market,
passive sampler for ambient studies.
COOL RENT SERVICES
We are specialized in refrigeration
technology rentals. We offer you the
solution for your cooling problem.
CRS
ONLINE GAS ANALYSERS
NEW
NEW