A) I will look for LP (limited partner) such as Yale Investment fund.pdf

•

0 likes•2 views

A) I will look for LP (limited partner) such as Yale Investment fund or pension funds or insurance companies. B) LP are technically are partners in the fund with limited rights and obligations. LP will fund the business for some fees and profit sharing but will not participate in day to day affairs leaving aside the managment part on promoters. This enables promotores to do what they are best at without worrying about what investors tells them to do. Solution A) I will look for LP (limited partner) such as Yale Investment fund or pension funds or insurance companies. B) LP are technically are partners in the fund with limited rights and obligations. LP will fund the business for some fees and profit sharing but will not participate in day to day affairs leaving aside the managment part on promoters. This enables promotores to do what they are best at without worrying about what investors tells them to do..

Education

Similar to A) I will look for LP (limited partner) such as Yale Investment fund.pdf

Chapter 1

NazminTandra

Chasing unicorns feb 2020

Kenneth Yeo

Chap005

Hang Dang

Finance Essays

Paper Writing Service Reviews

Rwj chapter 1

mackie10

Industry+and+Environmental+Analysis.pptx

LunaLedezma3

Goldman Sachs Imterview Tips

Augustin Bangalore

Goldman Sachs’ Interview Tips New

Augustin Bangalore

Part one financial management.ppt

MohamedAbdi347025

Introduction to private equity & venture capitalist fund

Manish Poddar

How a VC works behind the scenes

Osler, Hoskin & Harcourt LLP

Venture Financings 101 (SAFEs, Convertible Notes, Seed and Series A) | Bardia...

UCICove

Business organizations

Prof.(Dr.)Manoj Srivastava

Understanding Different Types of Organisations

Fred Freeman Okpala. BA, MBA,...

Tutorial on Investing I wrote. We're working on our own MVP Release and we also do a lot of work supporting startups. In my experience, there seems to be an lacking of education in the marketplace about VC/Angel/Seed/Investment and what investors look for. VC funding is highly popularized but it is not the only way to fund your business startup e.g. you can go organically or get a traditional loan and there are pros and cons to do each approach. I created this document for others to use as a tutorial or reference point of information, and hopefully help them in their own funding efforts. ***This is for example purposes only and proprietary information has been excluded or changed. ***

Investment strategy for mvp development and release

Paul Claxton

1 types of organizations

Prof.(Dr.)Manoj Srivastava

Are you searching on the internet for which types of business forms are suitable for you, and make it big internationally in the future? Well, you're in the right spot! Today, I'll help you understand all you need to know about setting up a new business. There are some important things to keep in mind when registering your business, and I'll break them down for you. Let's make this journey simple and exciting! In India, businesses can be of different types, each with its own good and not-so-good parts. There's the simplest one called sole proprietorship, great for small businesses. Then there are partnerships where a bunch of people share the good and bad stuff together. LLPs are cool because they give some protection to the partners, and private limited companies also do that for the people who own shares, but there are some rules. Public limited companies can get money from the public through the stock market. Each type has rules you need to follow, and these rules affect how businesses work and make decisions.

Types of business organization.pdf

SmartSkill97

The private equity fund

San Naing

Have you been following the growing trend in continuity funds? Listen to our 30-minute session with OurCrowd Investment Partner David Stark to learn how professional investors use preemptive rights to get further involved in winning companies. • Get an insider’s view of how to leverage preemptive rights in startup investing • Understand the basics of continuity funds and review case studies • Learn how to get involved at a time when companies are staying private longer

Everything You Need to Know about Preemptive Rights

OurCrowd

Hedge Fund Due Diligence: Resources to Help Investors Better Understand Their...

HedgeFundFundamentals

Similar to A) I will look for LP (limited partner) such as Yale Investment fund.pdf (20)

Chapter 1

Chasing unicorns feb 2020

Chap005

Finance Essays

Rwj chapter 1

Industry+and+Environmental+Analysis.pptx

Goldman Sachs Imterview Tips

Goldman Sachs’ Interview Tips New

Part one financial management.ppt

Introduction to private equity & venture capitalist fund

How a VC works behind the scenes

Venture Financings 101 (SAFEs, Convertible Notes, Seed and Series A) | Bardia...

Business organizations

Understanding Different Types of Organisations

Investment strategy for mvp development and release

1 types of organizations

Types of business organization.pdf

The private equity fund

Everything You Need to Know about Preemptive Rights

Hedge Fund Due Diligence: Resources to Help Investors Better Understand Their...

More from arwholesalelors

Algebra, branch of mathematics in which arithmetical operations and formal manipulations are applied to abstract symbols rather than specific numbers. The notion that there exists such a distinct discipline of mathematics, as well as the term algebra to denote it, resulted from a slow historical development. This article presents that history, tracing the evolution over time of the concept of the equation, number systems, symbols for conveying and manipulating mathematical statements, and the modern abstract structural view of algebra. Perhaps the most basic notion in mathematics is the equation, a formal statement that two sides of a mathematical expression are equal—as in the simple equation x + 3 = 5 and that both sides of the equation can be simultaneously manipulated (by adding, dividing, taking roots, and so on to both sides) in order to “solve” the equation. Yet, as simple and natural as such a notion may appear today, its acceptance first required the development of numerous mathematical ideas, each of which took time to mature. In fact, it took until the late 16th century to consolidate the modern concept of an equation as a single mathematical entity. Three main threads in the process leading to development of Algebra are Solution Algebra, branch of mathematics in which arithmetical operations and formal manipulations are applied to abstract symbols rather than specific numbers. The notion that there exists such a distinct discipline of mathematics, as well as the term algebra to denote it, resulted from a slow historical development. This article presents that history, tracing the evolution over time of the concept of the equation, number systems, symbols for conveying and manipulating mathematical statements, and the modern abstract structural view of algebra. Perhaps the most basic notion in mathematics is the equation, a formal statement that two sides of a mathematical expression are equal—as in the simple equation x + 3 = 5 and that both sides of the equation can be simultaneously manipulated (by adding, dividing, taking roots, and so on to both sides) in order to “solve” the equation. Yet, as simple and natural as such a notion may appear today, its acceptance first required the development of numerous mathematical ideas, each of which took time to mature. In fact, it took until the late 16th century to consolidate the modern concept of an equation as a single mathematical entity. Three main threads in the process leading to development of Algebra are.

Algebra, branch of mathematics in which arithmetical operations and .pdf

arwholesalelors

Accuracy: Data accuracy mentions to the degree with which data properly represents the ‘real-life’ objects they are intended to model. In several cases, accuracy is measured by how the morals agree with an identified source of right information. There are different sources of right information: a database of record, a similar corroborative set of data values from another table, enthusiastically computed values, or perhaps the result of a manual process. An example of an accuracy rule might specify that for healthcare workers, the Registering Status attribute must have a value that is accurate according to the regional authorization board. If that data is available as a reference data set, and automated process can be put in place to verify the accuracy, but if not, a manual process may be introduced to contact that local board to verify the accuracy of that attribute. Completeness: A hope of completeness indicates that certain attributes should be allocated values in a data set. Completeness rules can be assigned to a data set in three levels of constraints: 1. Mandatory points that require a value, 2. Optional points, which may have a value based on some set of conditions, and 3. Inapplicable points, which may not have a value Completeness may also be seen as encompassing usability and appropriateness of data values. Consistency: In its most basic form, consistency mentions to data values in one data set being consistent with standards in another data set. A strict meaning of consistency specifies that two data values drawn from distinct data sets must not fight with each other, while consistency does not essentially imply correctness. Even more complicated is the notion of consistency with a set of predefined constraints. More formal consistency restrictions can be encapsulated as a set of rules that specify consistency contacts between values of attributes, either across a record or message, or along all values of a single attribute. However, be careful not to confuse consistency with accuracy or correctness. Consistency may be defined within different contexts: • Between one set of point values and another point set within the same record • Between one set of point values and another point set in different records • Between one set of point values and the same point set within the same record at different points in time • Consistency may also take into account the concept of ‘reasonableness’ in which some range of acceptability is imposed on the values of a set of points. Solution Accuracy: Data accuracy mentions to the degree with which data properly represents the ‘real-life’ objects they are intended to model. In several cases, accuracy is measured by how the morals agree with an identified source of right information. There are different sources of right information: a database of record, a similar corroborative set of data values from another table, enthusiastically computed values, or perhaps the result of a manual process. An examp.

AccuracyData accuracy mentions to the degree with which data prop.pdf

arwholesalelors

#include #include #include using namespace std; template //For Template void bogosort(std::vector& array) //For bogosort { while (! is_sorted(array)) { std::random_shuffle(array.begin(), array.end()); } } template bool is_sorted(const std::vector& array) //Conforming for display { for (typename std::vector::size_type i = 1; i < array.size(); ++i) { if (array[i] < array[i-1]) { return false; } } return true; } std::vector a (10); //Creates a vector of size 10 int arr[10]; template void accept(std::vector& array) //Accepts data to a vector { int c; for(c = 0; c < 10; c++) cin>>arr[c]; a.assign (arr,arr+10); //Assign array data to the vector } template void display(std::vector& array) //Display the vector contents { for (std::vector::iterator it = array.begin(); it != array.end(); ++it) std::cout << \' \' << *it; } template void selection(std::vector& arr) //Selection soring operation { int mini, loc, temp, x, y; mini = arr[0]; for(x = 0; x <= arr.size()-1; x++) { mini = arr[x]; //x position value of array is considered as minimum value loc = x; //Stores the location of the minimum value for(y = x + 1; y <= arr.size()-1; y++) { if(arr[y] < mini) //Checks the already minimum value with the array contents { mini = arr[y]; //Stores the new minimum value loc = y; //Stores the location of the minimum value } } if(loc != x) //If it is not the same location { temp = arr[x]; arr[x] = arr[loc]; arr[loc] = temp; } } } template void bubble(std::vector &ar) //Bubble sort operation { bool swapp = true; while(swapp) { swapp = false; for (int i = 0; i < ar.size()-1; i++) { if (ar[i]>ar[i+1] ) { ar[i] += ar[i+1]; ar[i+1] = ar[i] - ar[i+1]; ar[i] -=ar[i+1]; swapp = true; } } } } int main() { char ch; do { cout<<\"\ MENU\"; cout<<\"\ a Fill the array with user input\"; cout<<\"\ b Display the array\"; cout<<\"\ c Suffel the array element randomly\"; cout<<\"\ d Sort the array using bubble sort\"; cout<<\"\ e Sort the array using Selection Sort\"; cout<<\"\ f Exit Program\"; cout<<\"\ Enter your choice: \"; cin>>ch; switch(ch) { case \'a\': case \'A\': accept(a); cout<<\"\ Accept data operation completed \ \"; break; case \'b\': case \'B\': display(a); cout<<\"\ Display data operation completed \ \"; break; case \'c\': case \'C\': bogosort(a); bool b = is_sorted(a); if(b == true) display(a); cout<<\"\ Bugg Sorting operation completed \ \"; break; case \'d\': case \'D\': bubble(a); display(a); cout<<\"\ Bubble Sort operation completed \ \"; break; case \'e\': case \'E\': selection(a); display(a); cout<<\"\ Selection Sort operation completed \ \"; break; case \'f\': case \'F\': exit(0); default: cout<<\"\ Wrong Choice\"; } }while(1); //Loop will continue infinitely till F or f is pressed } Output MENU a Fill the array with user input b Display the array c Suffel the array element randomly d Sort the array using bubble sort e Sort the array using Selection Sort f Exit Program Enter your choice: a 10 5 4 78 9 65 3 1 45 66 Accept data operation completed MENU a Fill th.

#include algorithm #include vector #include iostream usi.pdf

arwholesalelors

1. The Kepler space telescope detects planets and planet candidates by measuring dips in the brightness of stars to search for planets. The two new planets, named Kepler-34b and Kepler-35b are both gaseous Saturn-like planets. Kepler-34b orbits its two Sun-like stars every 289 days, and the stars orbit one another every 28 days. Located in the constellation Cygnus, Kepler-34b and Kepler-35b are discovered at 4,900 and 5,400 light-years from Earth.Kepler-35b orbits its smaller and cooler hot stars every 131 days. 2. The milky way galaxy may be home to at least two billion earthlike planets. Up to 2.7% of a sunlike stars in the milky way are Earth analogs.However, the number is actually far lower than many scientists anticipated. The Keplar telescope has been scanning a patch of sky near Cygnus constellation and analyzed the light from the 156,000 stars in its field of view. The published data showed that 1.4% of sunlike stars should have Earth analogs in the Goldllocks zone. The Goldilocks zone is dependent on the star\'s luminosity - brighter, hotter stars have habitable zones with a larger radius. The possibility of liquid water is the main criterion for whether a planet is suitable for life. The detection of water around a planet is detected via spectroscopy. Solution 1. The Kepler space telescope detects planets and planet candidates by measuring dips in the brightness of stars to search for planets. The two new planets, named Kepler-34b and Kepler-35b are both gaseous Saturn-like planets. Kepler-34b orbits its two Sun-like stars every 289 days, and the stars orbit one another every 28 days. Located in the constellation Cygnus, Kepler-34b and Kepler-35b are discovered at 4,900 and 5,400 light-years from Earth.Kepler-35b orbits its smaller and cooler hot stars every 131 days. 2. The milky way galaxy may be home to at least two billion earthlike planets. Up to 2.7% of a sunlike stars in the milky way are Earth analogs.However, the number is actually far lower than many scientists anticipated. The Keplar telescope has been scanning a patch of sky near Cygnus constellation and analyzed the light from the 156,000 stars in its field of view. The published data showed that 1.4% of sunlike stars should have Earth analogs in the Goldllocks zone. The Goldilocks zone is dependent on the star\'s luminosity - brighter, hotter stars have habitable zones with a larger radius. The possibility of liquid water is the main criterion for whether a planet is suitable for life. The detection of water around a planet is detected via spectroscopy..

1. The Kepler space telescope detects planets and planet candidates .pdf

arwholesalelors

1. When cell in S phase is fused with cell in G1 phase, the cell of G1 phase is stimulated to proceed back to S pahse. Stage 1 matches with 2nd cell\'s nucleus is activated to go prematurely, into DNA synthesis. This is because G1 is premature stage and enter back to S pahse to continue the synthesis of DNA. 2. When cell in S phase is fused with cell in G2 phase, the cell of G2 phase has no effect of S pahse on it. Stage 2 matches with 2nd cell\'s nucleus does not respond. This is because G2 cell contains all things provided by S phase. 3. When cell in M phase is fused with cell in S phase, the cell of S phase undergo chromatin condensation and chromosomes are visible with single chromatid. Stage 3 matches with 2n cell\'s nucleus undergoes chromatin condensation, giving visible chromosomes with single chromatid. This is because, S pahse is synthesis phase and the synthesized DNA is condensed and only one chromatid of each chromosome is visible. 4. When cell in M phase is fused with cell in G1 phase, The cell of G1 phase undergo chromosome condensation and chromatin damage. Stage 4 matches with, 2nd cell nucleus undergo chromosome condensation causing massive chromatin damage. This is because, the G1 pahse is preparatory phase of cell division and M phase is mitotic phase containing disassembly of chromatids and deacetylation of histone proteins. Solution 1. When cell in S phase is fused with cell in G1 phase, the cell of G1 phase is stimulated to proceed back to S pahse. Stage 1 matches with 2nd cell\'s nucleus is activated to go prematurely, into DNA synthesis. This is because G1 is premature stage and enter back to S pahse to continue the synthesis of DNA. 2. When cell in S phase is fused with cell in G2 phase, the cell of G2 phase has no effect of S pahse on it. Stage 2 matches with 2nd cell\'s nucleus does not respond. This is because G2 cell contains all things provided by S phase. 3. When cell in M phase is fused with cell in S phase, the cell of S phase undergo chromatin condensation and chromosomes are visible with single chromatid. Stage 3 matches with 2n cell\'s nucleus undergoes chromatin condensation, giving visible chromosomes with single chromatid. This is because, S pahse is synthesis phase and the synthesized DNA is condensed and only one chromatid of each chromosome is visible. 4. When cell in M phase is fused with cell in G1 phase, The cell of G1 phase undergo chromosome condensation and chromatin damage. Stage 4 matches with, 2nd cell nucleus undergo chromosome condensation causing massive chromatin damage. This is because, the G1 pahse is preparatory phase of cell division and M phase is mitotic phase containing disassembly of chromatids and deacetylation of histone proteins..

1. When cell in S phase is fused with cell in G1 phase, the cell of .pdf

arwholesalelors

1. A Holds individuals accountable for their actions. 2. E. A,B and C HIV Retroviruses have an enzyme, called reverse transcriptase is a retrovirus meaning that it is an RNA virus . Retroviruses have an enzyme, called reverse transcriptase which gives them the property to transcribe their RNA into DNA when they enter the host cell.THe binding of the virus is to the B cells of the immune system and prevent their proliferation and it integrates at specific site of the host genome. 3.A. Scientists have identified a single gene on chr 22 that, when deleted produces schizophernia phenotype. 4.E.Williams syndrome is a neurodevelopmental disorder caused due to the deletion of 26 genes from the long arm of chromosome number 7.The children affected have elfin charcetrs, strong social and verbal skills but ghave severe heart defects and low muscle tone. Solution 1. A Holds individuals accountable for their actions. 2. E. A,B and C HIV Retroviruses have an enzyme, called reverse transcriptase is a retrovirus meaning that it is an RNA virus . Retroviruses have an enzyme, called reverse transcriptase which gives them the property to transcribe their RNA into DNA when they enter the host cell.THe binding of the virus is to the B cells of the immune system and prevent their proliferation and it integrates at specific site of the host genome. 3.A. Scientists have identified a single gene on chr 22 that, when deleted produces schizophernia phenotype. 4.E.Williams syndrome is a neurodevelopmental disorder caused due to the deletion of 26 genes from the long arm of chromosome number 7.The children affected have elfin charcetrs, strong social and verbal skills but ghave severe heart defects and low muscle tone..

1. A Holds individuals accountable for their actions.2. E. A,B and.pdf

arwholesalelors

EtSH is the strongest acid, so EtS- is the weakest conjugate base. Two trends operate - electronegativity increases as you move to the right in the periodic table (thus O and S are more electronegative than N and P). Thus these atoms are better able to stabilize (-) charge. The other trend is that atomic size increases moving down in the table, so S is biggest than O. The larger an atom is, the more it is able to \"spread out\" the negative charge, stabilizing it (in other words, a charge of (-) is much smaller in relation to the total number of charges present, and the electron cloud can better accomodate the imbalance). Solution EtSH is the strongest acid, so EtS- is the weakest conjugate base. Two trends operate - electronegativity increases as you move to the right in the periodic table (thus O and S are more electronegative than N and P). Thus these atoms are better able to stabilize (-) charge. The other trend is that atomic size increases moving down in the table, so S is biggest than O. The larger an atom is, the more it is able to \"spread out\" the negative charge, stabilizing it (in other words, a charge of (-) is much smaller in relation to the total number of charges present, and the electron cloud can better accomodate the imbalance)..

EtSH is the strongest acid, so EtS- is the weakest conjugate base. .pdf

arwholesalelors

Particulars Amount $ Share Holders Funds Common Stock : Equity share capital as on 01.01.2013 500000 Issued During the Year 50000 550000 Retained Earnings : Previous Years 100000 Current Period Profit/ Loss: Revenue 150000 Expense (90000) 60000 160000 Less: Dividends declared -10000 Total 700000 Solution Particulars Amount $ Share Holders Funds Common Stock : Equity share capital as on 01.01.2013 500000 Issued During the Year 50000 550000 Retained Earnings : Previous Years 100000 Current Period Profit/ Loss: Revenue 150000 Expense (90000) 60000 160000 Less: Dividends declared -10000 Total 700000.

Particulars Amount $ Share Holders Funds Com.pdf

arwholesalelors

The Nitro group is electron withdrawing, and therefore enhances the reactivity of the carbonyl group in the ester function towards nucleophiles, such as amines and hydrazine. The Nitro group ensures that any derived compounds will be crystalline solids. The Nitro group itself can be converted to a variety of other functional groups, such as hydroxylamine (RNHOH) and amine (RNH2) which can be used as building blocks for more complicated structures: anilines (derived from reducing NO2 to NH2) can be converted easily to quinolones with antibiotic properties generally. Solution The Nitro group is electron withdrawing, and therefore enhances the reactivity of the carbonyl group in the ester function towards nucleophiles, such as amines and hydrazine. The Nitro group ensures that any derived compounds will be crystalline solids. The Nitro group itself can be converted to a variety of other functional groups, such as hydroxylamine (RNHOH) and amine (RNH2) which can be used as building blocks for more complicated structures: anilines (derived from reducing NO2 to NH2) can be converted easily to quinolones with antibiotic properties generally..

The Nitro group is electron withdrawing, and ther.pdf

arwholesalelors

The Systems Development Life Cycle Moderate and large firms with unique information needs often develop information systems in-house. That is to say that information technology (IT) professional within the firm design and program the systems. A greater number of smaller companies and large firms with relatively standardized information needs opt to purchase information systems from software vendors. Both approaches represent significant financial and operational risks. a model for reducing this risk through careful planning, execution, control, and documentation of key activities. The five phases of this model are: 1) Business Needs and Strategy Systems Strategy –Assess Strategic Information Needs –Develop a Strategic Systems Plan –Create an Action Plan 2) Project Initiation – Systems Analysis –Conceptualization of Alternative Designs –Systems Evaluation and Selection 3.) In-House Systems Development –Construct the System –Deliver the System 4). Commercial Packages –Trends in Commercial Packages –Choosing a Package 5) Maintenance and Support The participants in systems development can be classified into three broad groups: systems professionals, end users, and stakeholders. Systems professionals are systems analysts, systems designers, and programmers. These individuals actually build the system. They gather facts about problems with the current system, analyze these facts, and formulate a solution to solve the problems. The product of their efforts is a new system. End users are those for whom the system is built. Many users exist at all levels in an organization. These include managers, operations personnel, accountants, and internal auditors. In some organizations, it is difficult to find someone who is not a user. During systems development, systems professionals work with the primary users to obtain an understanding of the users’ problems and a clear statement of their needs. As defined in Chapter 1, stakeholders are individuals either within or outside the organization who have an interest in the system but are not end users. These include accountants, internal auditors, external auditors, and the internal steering committee that oversees systems development. Cost/Time Analysis: As stated before, the cost/time analysis is an attempt to calculate to what degree the project and system will meet the objectives. The SDLC must address two topics in its support of this area: the scope of the analysis and the algorithm for doing it. Cost/Benefit Scope The benefit side of the analysis should be expressed in quantitative terms wherever possible. Qualitative or intangible benefits usually are reflections of poorly analyzed tangible benefits. The SDLC should support the process of quantifying all benefits. On the costs side, the SDLC must address development costs, installation costs and ongoing operational costs. In doing these calculations it should differentiate between capital costs and expense costs. Cost/Benefit Algorithm The method of calcu.

The Systems Development Life Cycle Moderate and large firms with uni.pdf

arwholesalelors

You are asked to determine DNA content of a liver tissue. Describe how you will porceed in finding amount of DNA in the sample Take a piece of live tissue and subject it to detergent solution i.e. SDS (sodiumdodecyl sulfate) so that the cell membrane of the cells will be removed out through micelle formation & then alcohol is added as DNA soluble in water. This is followed by the formation of aqueous phase with DNA, precipitate layer with protein and bottom organic layer. Now the purity of DNA sample is calculated to know the “total amount of DNA in the sample as ng DNA / µg dry weight”. There are various processes applicable to determine total DNA content using either cloning, qPCR, sequencing. However, initial purity of DNA can be calculated by measuring absorbance or OD260/OD280 ratio at 280nm using “spectrophotomemeter” (UV-Visible). The range of OD with absorption of UV light between 1.8 to 2.0 denotes the presence of DNA. Lower than this OD ratio, denotes the presence of proteins. The another method of examining the sample is through & this method is useful to deterimine total DNA concentration by use of the fluorochrome Hoechst 33258 & filters, & scanning fluorescence spectrophotometer at emission at 458 nm. Solution You are asked to determine DNA content of a liver tissue. Describe how you will porceed in finding amount of DNA in the sample Take a piece of live tissue and subject it to detergent solution i.e. SDS (sodiumdodecyl sulfate) so that the cell membrane of the cells will be removed out through micelle formation & then alcohol is added as DNA soluble in water. This is followed by the formation of aqueous phase with DNA, precipitate layer with protein and bottom organic layer. Now the purity of DNA sample is calculated to know the “total amount of DNA in the sample as ng DNA / µg dry weight”. There are various processes applicable to determine total DNA content using either cloning, qPCR, sequencing. However, initial purity of DNA can be calculated by measuring absorbance or OD260/OD280 ratio at 280nm using “spectrophotomemeter” (UV-Visible). The range of OD with absorption of UV light between 1.8 to 2.0 denotes the presence of DNA. Lower than this OD ratio, denotes the presence of proteins. The another method of examining the sample is through & this method is useful to deterimine total DNA concentration by use of the fluorochrome Hoechst 33258 & filters, & scanning fluorescence spectrophotometer at emission at 458 nm..

You are asked to determine DNA content of a liver tissue. Describe h.pdf

arwholesalelors

when we draw a vertical line it will cross the graph twice(that is m.pdf

arwholesalelors

We Know that Baking powder and Baking soda isused as a leave.pdf

arwholesalelors

The fallowing program shows the simple transformation #define GLEW_STATIC #include #include #include #include #include #include #include const GLchar* vertexSource = \"#version 150 core\ \" \"in vec2 position;\" \"in vec3 color;\" \"in vec2 texcoord;\" \"out vec3 Color;\" \"out vec2 Texcoord;\" \"uniform mat4 trans;\" \"void main()\" \"{\" \" Color = color;\" \" Texcoord = texcoord;\" \" gl_Position = trans * vec4(position, 0.0, 1.0);\" \"}\"; const GLchar* fragmentSource = \"#version 150 core\ \" \"in vec3 Color;\" \"in vec2 Texcoord;\" \"out vec4 outColor;\" \"uniform sampler2D texKitten;\" \"uniform sampler2D texPuppy;\" \"void main()\" \"{\" \" outColor = mix(texture(texKitten, Texcoord), texture(texPuppy, Texcoord), 0.5);\" \"}\"; int main() { auto t_start = std::chrono::high_resolution_clock::now(); sf::ContextSettings settings; settings.depthBits = 24; settings.stencilBits = 8; sf::Window window(sf::VideoMode(800, 600, 32), \"OpenGL\", sf::Style::Titlebar | sf::Style::Close, settings); glewExperimental = GL_TRUE; glewInit(); GLuint vao; glGenVertexArrays(1, &vao); glBindVertexArray(vao); GLuint vbo; glGenBuffers(1, &vbo); GLfloat vertices[] = { -0.5f, 0.5f, 1.0f, 0.0f, 0.0f, 0.0f, 0.0f, 0.5f, 0.5f, 0.0f, 1.0f, 0.0f, 1.0f, 0.0f, 0.5f, -0.5f, 0.0f, 0.0f, 1.0f, 1.0f, 1.0f, -0.5f, -0.5f, 1.0f, 1.0f, 1.0f, 0.0f, 1.0f }; glBindBuffer(GL_ARRAY_BUFFER, vbo); glBufferData(GL_ARRAY_BUFFER, sizeof(vertices), vertices, GL_STATIC_DRAW); GLuint ebo; glGenBuffers(1, &ebo); GLuint elements[] = { 0, 1, 2, 2, 3, 0 }; glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, ebo); glBufferData(GL_ELEMENT_ARRAY_BUFFER, sizeof(elements), elements, GL_STATIC_DRAW); GLuint vertexShader = glCreateShader(GL_VERTEX_SHADER); glShaderSource(vertexShader, 1, &vertexSource, NULL); glCompileShader(vertexShader); GLuint fragmentShader = glCreateShader(GL_FRAGMENT_SHADER); glShaderSource(fragmentShader, 1, &fragmentSource, NULL); glCompileShader(fragmentShader); GLuint shaderProgram = glCreateProgram(); glAttachShader(shaderProgram, vertexShader); glAttachShader(shaderProgram, fragmentShader); glBindFragDataLocation(shaderProgram, 0, \"outColor\"); glLinkProgram(shaderProgram); glUseProgram(shaderProgram); GLint posAttrib = glGetAttribLocation(shaderProgram, \"position\"); glEnableVertexAttribArray(posAttrib); glVertexAttribPointer(posAttrib, 2, GL_FLOAT, GL_FALSE, 7 * sizeof(GLfloat), 0); GLint colAttrib = glGetAttribLocation(shaderProgram, \"color\"); glEnableVertexAttribArray(colAttrib); glVertexAttribPointer(colAttrib, 3, GL_FLOAT, GL_FALSE, 7 * sizeof(GLfloat), (void*)(2 * sizeof(GLfloat))); GLint texAttrib = glGetAttribLocation(shaderProgram, \"texcoord\"); glEnableVertexAttribArray(texAttrib); glVertexAttribPointer(texAttrib, 2, GL_FLOAT, GL_FALSE, 7 * sizeof(GLfloat), (void*)(5 * sizeof(GLfloat))); GLuint textures[2]; glGenTextures(2, textures); int width, height; unsigned char* image; glActiveTexture(GL_TEXTURE0); glBindTexture(GL_TEXTURE_2D, textures[0]); image = SOIL_load_imag.

The fallowing program shows the simple transformation #define GLEW.pdf

arwholesalelors

Two types of malware :- 1. Virus: A virus is a contagious program or code that attaches itself to another piece of software, and then reproduces itself when that software is run. Most often this is spread by sharing software or files between computers. Virus cannot be spread without a human action. So when you share infected files or send email with viruses as attachment in email, virus spread in another system also. If you have turned off your anti-virus protection your system is vulnerable to virus and other threats. 2. Trojan: This is the most dangerous Malware. Trojans are written with the purpose of discovering your financial information, taking over your computer’s system resources, and in larger systems creating a “denial-of-service attack ”. Denial-of-service attack: an attempt to make a machine or network resource unavailable to those attempting to reach it. Example: AOL, Yahoo or your business network becoming unavailable. 70% malware are trojan horse. When you open a file that have trojan horse or other kind of unscrupulous virus program then it replicate in your system and your system is also get infected. Solution Two types of malware :- 1. Virus: A virus is a contagious program or code that attaches itself to another piece of software, and then reproduces itself when that software is run. Most often this is spread by sharing software or files between computers. Virus cannot be spread without a human action. So when you share infected files or send email with viruses as attachment in email, virus spread in another system also. If you have turned off your anti-virus protection your system is vulnerable to virus and other threats. 2. Trojan: This is the most dangerous Malware. Trojans are written with the purpose of discovering your financial information, taking over your computer’s system resources, and in larger systems creating a “denial-of-service attack ”. Denial-of-service attack: an attempt to make a machine or network resource unavailable to those attempting to reach it. Example: AOL, Yahoo or your business network becoming unavailable. 70% malware are trojan horse. When you open a file that have trojan horse or other kind of unscrupulous virus program then it replicate in your system and your system is also get infected..

Two types of malware -1. Virus A virus is a contagious program o.pdf

arwholesalelors

TlI -- Tl+ + I- Ksp = 8.9E-8 = [Tl+][I-] (eqn. 1) PbI2 .pdf

arwholesalelors

The cells of the reproductive organs (Eg: ovaries ad testes) undergo meiosis. Meiosis is a type of nuclear division, which produces four haploid cells from a single diploid cell. Meiosis is divided into two phases, meiosis I (one diploid nucleus to two haploid nuclei) and meiosis II (two haploid nuclei to four haploid nuclei). Meiosis I and meiosis II are subdivided into four phases again namely, prophase, metaphase, anaphase and telophase. Thus, meiosis is divided into a total of eight phases. The phases of meiosis I are prohase-i, metaphase-I, anaphase-I and telophase-I. Similarly, the phases of meiosis-II are prohase-II, metaphase-II, anaphase-II and telophase-II. Prophase is the first phase of cell division in both mitosis and meiosis. During this phase, cohesion that is present throughout the length of the chromatids is removed except at the centromere. The chromatids become more visible during this phase. In meiosis, the substages of prophase-I include, leptonema, zygonema, pachynema, diplonema, diakinesis. During the metaphase, two chromatids are formed from each chromosome by longitudinal splitting. These chromatids form the chromosomes of daughter cells. During anaphase, centromeres are pulled and the chromatids become separated and move towards the opposite poles. These chromatids now are the chromosomes of the daughter cells, and are pulled towards the centrioles by means of spindle fibres. During “metaphase I and II” the chromosomes align at the midway between the two opposite spindle poles. In the stage of telophase, cytoplasmic division of the cell takes place (cytokinesis) during which each of the daughter cell receives one of the daughter nuclei. The interval between each division is called interphase. During meiosis, the homologous chromosomes align during the prophase. These chromosomes crossover at some point and rejoin to form recombinant chromatids, and move towards the opposite poles during anaphase. The chromosomal crossover ocurs during metaphase-I of the meiosis, In meiosis, Alignment of homologous chromosomes at Mid-Prophase –I is characteristic of meiosis. The two chromosomes sharing the same quality are called “homologous chromosomes.” These chromosomes crossover at some point and rejoin to form recombinant chromatids. Now, these chromosomes are separated at Anaphase-I and move to their opposite poles. During anaphase of mitosis, the sister chromatids get separated and move to the opposite poles. In contrast to mitosis, the “homologues chromosomes” (but not sister chromatids) move to the opposite poles in anaphase –I of meiosis. In meiosis, the separation of sister chromatids occur in anaphase –II. Solution The cells of the reproductive organs (Eg: ovaries ad testes) undergo meiosis. Meiosis is a type of nuclear division, which produces four haploid cells from a single diploid cell. Meiosis is divided into two phases, meiosis I (one diploid nucleus to two haploid nuclei) and meiosis II (two haploid nuclei to four h.

The cells of the reproductive organs (Eg ovaries ad testes) undergo.pdf

arwholesalelors

Scientific evidences I would give in support of evolution: 1. Paleontological evidence: Fossils are those remains of plants and animals that could not be degraded. Some of them bear resemblances to present day animals and serve as connecting links, eg. Duck billed platypus is connecting link between reptiles and mammals. Some of them represent extinct organisms, eg. dinosaurs. Cross sections of the earth\'s crust from where the fossils have been isolated determines the geological time scale during which the organism existed. 2. Comparative anatomy/physiology: Homologous organs of animals such as forelimb bones of humans, tigers, whales and bats share similar type of arrangement and indicates common ancestry. Such type of evolution is called \"divergent\". Analogous organs are opposite to homologous organs, such as wings of butterfly and birds. Although they perform the same function, they are not anatomically similar. Thus, these are results of \"convergent \"evolution. 3. Similarities in genes and proteins among genetically different organisms also support for the existence of common ancestry. 4. Natural selection/Industrial melanism: The dominance of dark coloured moths in industrial areas compared to the white forms is an example of industrial melanism. This type of selection resulted in the dark coloured moths from becoming a prey of birds compared to the paler ones as the darker forms camouflage in the dark coloured soots. Another example of natural selection is antibiotic resistance in bacteria. The resistant bacteria can be isolated by plating the organisms in a LB agar plate containing the corresponding antibiotic. 5. Adaptive radiation: Darwin\'s finches in Galapagos island is an example of adaptive radiation. It was found that the different species of finches (with different beak structure) arose from an initial seed eating finch, enabling them to become vegetarian and insectivorous finches. Solution Scientific evidences I would give in support of evolution: 1. Paleontological evidence: Fossils are those remains of plants and animals that could not be degraded. Some of them bear resemblances to present day animals and serve as connecting links, eg. Duck billed platypus is connecting link between reptiles and mammals. Some of them represent extinct organisms, eg. dinosaurs. Cross sections of the earth\'s crust from where the fossils have been isolated determines the geological time scale during which the organism existed. 2. Comparative anatomy/physiology: Homologous organs of animals such as forelimb bones of humans, tigers, whales and bats share similar type of arrangement and indicates common ancestry. Such type of evolution is called \"divergent\". Analogous organs are opposite to homologous organs, such as wings of butterfly and birds. Although they perform the same function, they are not anatomically similar. Thus, these are results of \"convergent \"evolution. 3. Similarities in genes and proteins among genetically different o.

Scientific evidences I would give in support of evolution1. Paleo.pdf

arwholesalelors

Package scopeis the range of visibility for aparticular element or construct contained in apackage.–“range of visibility” describe whether a packageitem (such as function) can be accessed fromoutside the package or only from other programunits within the same package.–Any elements declared in a package specificationare consideredpublic.–The elements are considered private if they can be called from other program units within the samepackage. Solution Package scopeis the range of visibility for aparticular element or construct contained in apackage.–“range of visibility” describe whether a packageitem (such as function) can be accessed fromoutside the package or only from other programunits within the same package.–Any elements declared in a package specificationare consideredpublic.–The elements are considered private if they can be called from other program units within the samepackage..

Package scopeis the range of visibility for aparticular element or c.pdf

arwholesalelors

Point of zero charge related to the adsorption phenomenon I surface chemistry. Here it is the point if achievement of zero charge density on a surface. If pHzpc is 8.5 that means at this pH solid submerged in electrolyte will show zero electrical charge on the surface. P sorption refers to binding of phosphates in other forms to soil particles. At high pH, P availability is low because of reaction of phosphates to calcium which result in formation of apatite. At low pH, phosphate reacts with aluminum, iron etc and results in formation of various other minerals. Solution Point of zero charge related to the adsorption phenomenon I surface chemistry. Here it is the point if achievement of zero charge density on a surface. If pHzpc is 8.5 that means at this pH solid submerged in electrolyte will show zero electrical charge on the surface. P sorption refers to binding of phosphates in other forms to soil particles. At high pH, P availability is low because of reaction of phosphates to calcium which result in formation of apatite. At low pH, phosphate reacts with aluminum, iron etc and results in formation of various other minerals..

Point of zero charge related to the adsorption phenomenon I surface .pdf

arwholesalelors

More from arwholesalelors (20)

Algebra, branch of mathematics in which arithmetical operations and .pdf

AccuracyData accuracy mentions to the degree with which data prop.pdf

#include algorithm #include vector #include iostream usi.pdf

1. The Kepler space telescope detects planets and planet candidates .pdf

1. When cell in S phase is fused with cell in G1 phase, the cell of .pdf

1. A Holds individuals accountable for their actions.2. E. A,B and.pdf

EtSH is the strongest acid, so EtS- is the weakest conjugate base. .pdf

Particulars Amount $ Share Holders Funds Com.pdf

The Nitro group is electron withdrawing, and ther.pdf

The Systems Development Life Cycle Moderate and large firms with uni.pdf

You are asked to determine DNA content of a liver tissue. Describe h.pdf

when we draw a vertical line it will cross the graph twice(that is m.pdf

We Know that Baking powder and Baking soda isused as a leave.pdf

The fallowing program shows the simple transformation #define GLEW.pdf

Two types of malware -1. Virus A virus is a contagious program o.pdf

TlI -- Tl+ + I- Ksp = 8.9E-8 = [Tl+][I-] (eqn. 1) PbI2 .pdf

The cells of the reproductive organs (Eg ovaries ad testes) undergo.pdf

Scientific evidences I would give in support of evolution1. Paleo.pdf

Package scopeis the range of visibility for aparticular element or c.pdf

Point of zero charge related to the adsorption phenomenon I surface .pdf

Recently uploaded

Graduate Outcomes Presentation Slides - English

neillewis46

TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...

Nguyen Thanh Tu Collection

This presentation covers the essential parameters of Unit 2 Operations Processes of the subject Operations & Supply Chain Management. Topics Covered: Volume Variety and Flow. Types of Processes and Operations Systems - Continuous Flow system and intermittent flow systems.Job Production, Batch Production, Assembly line and Continuous Flow, Process and Product Layout. Design of Service Systems, Service Blueprinting.

OSCM Unit 2_Operations Processes & Systems

Sandeep D Chaudhary

A procedure when multiple vendors are asked to submit proposals for a supply contract or project. It helps businesses to assess offers and select the best vendor based on factors like cost, quality, and other relevant factors. In Odoo 17, the Call for Tenders feature has undergone significant improvements, making procurement process management more efficient and seamless. Accessing and managing this feature can still be done through the same interface as Blanket Orders, with the addition of creating an exclusive agreement type for Call for Tenders.

How to Manage Call for Tendor in Odoo 17

Celine George

Orientation Canvas Course Presentation.pdf

Elizabeth Walsh

HMCS Max Bernays Pre-Deployment Brief (May 2024).pptx

Esquimalt MFRC

21st_Century_Skills_Framework_Final_Presentation_2.pptx

JoelynRubio1

Program code examples (known also as worked examples) play a crucial role in learning how to program. Instructors use examples extensively to demonstrate the semantics of the programming language being taught and to highlight the fundamental coding patterns. Programming textbooks allocate considerable space to present and explain code examples. To make the process of studying code examples more interactive, CS education researchers developed a range of tools to engage students in the study of code examples. These tools include codecasts (codemotion,codecast,elicasts), interactive example explorers (WebEx, PCEX), and tutoring systems (DeepTutor). An important component in all types of worked examples is code explanations associated with specific code lines or code chunks of an example. The explanations connect examples with general programming knowledge explaining the role and function of code fragments or their behavior. In textbooks, these explanations are usually presented as comments in the code or as explanations on the margins. The example explorer tools allow students to examine these explanations interactively. Tutoring systems, which engage students in explaining the code, use these model explanations to check student responses and provide scaffolding. In all these cases, to make a worked example re-usable beyond its presentation in a lecture, the explanations have to be authored by instructors or domain experts i.e., produced and integrated into a specific system. As the experience of the last 10 years demonstrated, these explanations are hard to obtain. Those already collected are usually “locked” in a specific example-focused system and can’t be reused. The purpose of this working group is to support broader re-used of worked examples augmented with explanations. Our current plan is to develop а standard approach to represent explained examples. This approach will enable an example created for any of the existing systems to be explored in a standard format and imported into any other example-focused system. We plan to follow a successful experience of the PEML working group focused on re-using programming exercises.

SPLICE Working Group:Reusable Code Examples

Peter Brusilovsky

How to Add New Custom Addons Path in Odoo 17

Celine George

APM webinar hosted by the Scotland Network on 14 May 2024. Speakers: Chris Drysdale and Peter Huggett An interactive session discussing how Project Managers can identify mental health symptoms, provide tools to help themselves and others, plus also increase the capabilities of the Project Management function. This webinar was held on 14 May 2024. The covid-19 pandemic led to concerns about a worsening of mental health & wellbeing across the world and increased awareness in both society and the workplace. This webinar looks to advise the benefits of having a Mental Health First Aid function in the workplace whilst also providing tools and techniques that can be readily used and applied to yourself and colleagues. Additionally, there are wider benefits to Project Management which will be proposed and discussed.

Including Mental Health Support in Project Delivery, 14 May.pdf

Association for Project Management

Accessible Digital Futures project (20/03/2024)

Jisc

Transparency, Recognition and the role of eSealing - Ildiko Mazar and Koen No...

EADTU

When Quality Assurance Meets Innovation in Higher Education - Report launch w...

Gary Wood

Jamworks pilot and AI at Jisc (20/03/2024)

Jisc

MuleSoft Integration with AWS Textract | Calling AWS Textract API |AWS - Cloud Native Meetup #4 Event Link:- https://meetups.mulesoft.com/events/details/mulesoft-aws-cloud-native-presents-unveiling-the-heart-of-mulesoft-intelligent-document-processing-aws-textract/ Agenda ● Introduction to Textract ● Document Processing using AWS Textract ● AWS Textract UseCases ● AWS Textract API ● Calling AWS Textract API from Postman ● Demo - Textract Integration with MuleSoft ● QnA ◈ Important Links https://aws.amazon.com/textract/resources/ https://docs.aws.amazon.com/textract/latest/dg/API_AnalyzeDocument.html https://docs.aws.amazon.com/general/latest/gr/textract.html https://docs.aws.amazon.com/IAM/latest/UserGuide/reference_aws-signing.html https://ambassadorpatryk.com/2021/01/discover-how-to-sign-aws-api-request-using-dataweave/ https://github.com/djuang1/awsv4auth-extension For Upcoming Meetups Join AWS - Cloud Native Meetup Group - https://meetups.mulesoft.com/aws-cloud-native/ Youtube:- youtube.com/@mulesoftmysore Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N Speaker:- Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/ Priya Shaw - https://www.linkedin.com/in/priya-shaw Organizers:- Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/ Robin Sinha - https://www.linkedin.com/in/robin-sinha

MuleSoft Integration with AWS Textract | Calling AWS Textract API |AWS - Clou...

MysoreMuleSoftMeetup

Observing-Correct-Grammar-in-Making-Definitions.pptx

AdelaideRefugio

Wellbeing inclusion and digital dystopias.pptx

Jisc

Simple, Complex, and Compound Sentences Exercises.pdf

stareducators107

QUATER-1-PE-HEALTH-LC2- this is just a sample of unpacked lesson

httgc7rh9c

Towards a code of practice for AI in AT.pptx

Jisc

Recently uploaded (20)

Graduate Outcomes Presentation Slides - English

TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...

OSCM Unit 2_Operations Processes & Systems

How to Manage Call for Tendor in Odoo 17

Orientation Canvas Course Presentation.pdf

HMCS Max Bernays Pre-Deployment Brief (May 2024).pptx

21st_Century_Skills_Framework_Final_Presentation_2.pptx

SPLICE Working Group:Reusable Code Examples

How to Add New Custom Addons Path in Odoo 17

Including Mental Health Support in Project Delivery, 14 May.pdf

Accessible Digital Futures project (20/03/2024)

Transparency, Recognition and the role of eSealing - Ildiko Mazar and Koen No...

When Quality Assurance Meets Innovation in Higher Education - Report launch w...

Jamworks pilot and AI at Jisc (20/03/2024)

MuleSoft Integration with AWS Textract | Calling AWS Textract API |AWS - Clou...

Observing-Correct-Grammar-in-Making-Definitions.pptx

Wellbeing inclusion and digital dystopias.pptx

Simple, Complex, and Compound Sentences Exercises.pdf

QUATER-1-PE-HEALTH-LC2- this is just a sample of unpacked lesson

Towards a code of practice for AI in AT.pptx

A) I will look for LP (limited partner) such as Yale Investment fund.pdf

1. A) I will look for LP (limited partner) such as Yale Investment fund or pension funds or insurance companies. B) LP are technically are partners in the fund with limited rights and obligations. LP will fund the business for some fees and profit sharing but will not participate in day to day affairs leaving aside the managment part on promoters. This enables promotores to do what they are best at without worrying about what investors tells them to do. Solution A) I will look for LP (limited partner) such as Yale Investment fund or pension funds or insurance companies. B) LP are technically are partners in the fund with limited rights and obligations. LP will fund the business for some fees and profit sharing but will not participate in day to day affairs leaving aside the managment part on promoters. This enables promotores to do what they are best at without worrying about what investors tells them to do.

A) I will look for LP (limited partner) such as Yale Investment fund.pdf

Recommended

Recommended

More Related Content

Similar to A) I will look for LP (limited partner) such as Yale Investment fund.pdf

Similar to A) I will look for LP (limited partner) such as Yale Investment fund.pdf (20)

More from arwholesalelors

More from arwholesalelors (20)

Recently uploaded

Recently uploaded (20)

A) I will look for LP (limited partner) such as Yale Investment fund.pdf