The document discusses Harry Docwra's process for editing audio clips for a project. It describes how he used the trim tool to cut audio pieces and censor swear words. It explains how to drag and drop audio clips onto the timeline, being careful not to let go in the wrong place. It also discusses using the volume line to control audio volume and a YouTube MP3 downloader to obtain music clips that could not be recorded. Finally, it mentions using an audio recorder to easily record clear dialogue for the project.

1. Production Reflection
Harry .T. Docwra

2. Process
• To cut the audio pieces I
used the trim tool. By
doing this I am also able
to censor the swear
words which is very much
needed for the project.
This was my favourite tool
because it was the easiest
of all of them to use.

3. Process
• To insert the audio clips
into the timeline you
have to drag them from
documents and drop
them on the timeline. You
have to be careful when
you do this because if you
let go of the mouse by
mistake it can end up in
the wrong place and you
will have to drag it to
where it needs to be.

4. Process
• On the bottom right of
the screenshot you will
be able to see a line that
says volume. This is very
helpful as it is one of the
ways I can control the
volume of the audio clips.

5. Process
• I used a YouTube Mp3
downloader to download
audio clips I needed for
the project that I couldn’t
record myself. This was
very helpful as I could use
any music I wanted to.

6. Process
This is an audio
recorder. It is what I
used to record
dialogue in the
project. It was very
helpful and I found it
easy to use. The audio
was clear and is
probably the best type
of recorder there is.