3 d metal parts-isotropic finish
•
1 like•1,224 views
This document discusses an SME MMR research project on centrifugal isotropic finishing of 3D printed metal parts. It includes 3D optical maps of unfinished and finished part surfaces, showing that centrifugal ball finishing processing reduced the surface roughness from 159 microinches to 4.9 microinches. The project is led by Dave Davidson and Jack Clark and aims to develop a hands-free finishing process for 3D printed scrap metal parts.
Report
Share
Report
Share
Download to read offline
Recommended
Jack clark resume
Jack R. Clark is an experienced manager, lecturer, consultant and engineer with over 30 years of experience in systems development, surface finishing, and mechanical design. He holds a BS in Electrical Engineering from New York University and has taught at Colorado State University. He has extensive professional affiliations and has published several articles on surface metrology topics. His career includes experience as a consultant, engineering manager, and director of surface technology divisions for various companies.
3497458.ppt
The document summarizes key concepts related to failure of materials including the three main failure modes: fracture, fatigue, and creep. It defines fracture as failure due to crack propagation, fatigue as failure under cyclic loading even when maximum stresses are below the material's strength, and creep as progressive deformation under constant stress at elevated temperatures. The summary provides examples of each failure mode and discusses testing techniques like impact, fatigue, and creep tests used to characterize failure behavior. Fracture mechanics concepts like stress concentration and fracture toughness are also introduced for understanding crack propagation and designing against failure.
CAD/CAM & 3D printing
This document provides an overview of CAD/CAM systems and 3D printing in dentistry. It discusses the CAD/CAM process which involves scanning, designing, and milling phases to create restorations. CAD/CAM systems are classified as laboratory or chairside systems. The main components are scanners, CAD software, and CAM milling devices. Scanners can be intraoral, extraoral, optical, or mechanical. CAM includes subtractive milling and additive 3D printing. Milling is classified by axis and environment. 3D printing involves layer-by-layer additive manufacturing. Applications of CAD/CAM and 3D printing in dentistry include crowns, bridges, implants, dentures, and models.
Centrifugal isotropic micro finishing bearing surfaces
This document discusses developing isotropic micro-finishes using centrifugal iso-finishing. It explains that centrifugal iso-finishing is the only method that produces a truly random surface pattern compared to other finishing methods that leave parallel ridges and grooves. Electron microscopy images show how centrifugal iso-finishing blends ridges and grooves into an isotropic surface. Before and after comparisons demonstrate how centrifugal iso-finishing transforms surfaces from an as-ground finish into a neutral to negatively skewed isotropic surface that provides a more efficient bearing surface. The document promotes contacting the author for free sample processing or contract deburring and finishing services.
Experimental Study Using Different Tools/Electrodes E.G. Copper, Graphite on...
This document presents research on comparing the performance of copper and graphite electrodes in an electrical discharge machining (EDM) process. Experiments were conducted to determine the effect of process parameters like current, impulse duration, and spark gap on the material removal rate (MRR) of mild steel. Regression analysis was used to develop a model relating the process parameters to MRR. The results showed that at lower parameter levels, graphite electrodes produced a higher MRR. However, as the parameter levels increased, copper electrodes provided a higher MRR. It was concluded that graphite electrodes are best for lower parameter levels and finishing work due to lower MRR, while copper electrodes are suitable for high material removal processes with less emphasis on surface finish
1 s2.0-s2212827114000377-main
This document discusses an experiment that investigated the influence of different clamping systems on drilling carbon fiber reinforced plastics. The researchers tested 3-point, 4-point, and ring clamping systems with varying distances between the drill axis and clamping points. They measured process forces during drilling and analyzed resulting delamination and fiber pullouts. The results showed that increasing the distance between the drill axis and clamping points significantly increased process forces and surface damage. Damage was generally greater on the bottom surface of workpieces compared to the top. Ring clamping produced less damage than 3-point or 4-point systems as distance increased.
Mp 1-unit - iv - sheet metal processes
This document discusses various sheet metal processes and forming operations. It describes common sheet metal materials and characteristics. Various presses and cutting dies are discussed for operations like blanking, piercing, and bending. Specific forming processes like drawing, stretching, spinning, hydroforming and magnetic pulse forming are explained. Tests for assessing formability of sheet metals are also summarized.
Kachlakev_RC Control Beam MSC-Marc_wAppendix
This document analyzes a reinforced concrete control beam tested by Kachlakev using nonlinear finite element techniques in MSC/Marc, Ansys, and Abaqus. It summarizes the geometry and material properties of the control beam, presents the finite element model idealization and boundary conditions, and compares the load-deflection curves from the finite element analysis to experimental test data. The analysis aims to predict the beam's load capacity and cracking behavior using different modeling approaches.
Recommended
Jack clark resume
Jack R. Clark is an experienced manager, lecturer, consultant and engineer with over 30 years of experience in systems development, surface finishing, and mechanical design. He holds a BS in Electrical Engineering from New York University and has taught at Colorado State University. He has extensive professional affiliations and has published several articles on surface metrology topics. His career includes experience as a consultant, engineering manager, and director of surface technology divisions for various companies.
3497458.ppt
The document summarizes key concepts related to failure of materials including the three main failure modes: fracture, fatigue, and creep. It defines fracture as failure due to crack propagation, fatigue as failure under cyclic loading even when maximum stresses are below the material's strength, and creep as progressive deformation under constant stress at elevated temperatures. The summary provides examples of each failure mode and discusses testing techniques like impact, fatigue, and creep tests used to characterize failure behavior. Fracture mechanics concepts like stress concentration and fracture toughness are also introduced for understanding crack propagation and designing against failure.
CAD/CAM & 3D printing
This document provides an overview of CAD/CAM systems and 3D printing in dentistry. It discusses the CAD/CAM process which involves scanning, designing, and milling phases to create restorations. CAD/CAM systems are classified as laboratory or chairside systems. The main components are scanners, CAD software, and CAM milling devices. Scanners can be intraoral, extraoral, optical, or mechanical. CAM includes subtractive milling and additive 3D printing. Milling is classified by axis and environment. 3D printing involves layer-by-layer additive manufacturing. Applications of CAD/CAM and 3D printing in dentistry include crowns, bridges, implants, dentures, and models.
Centrifugal isotropic micro finishing bearing surfaces
This document discusses developing isotropic micro-finishes using centrifugal iso-finishing. It explains that centrifugal iso-finishing is the only method that produces a truly random surface pattern compared to other finishing methods that leave parallel ridges and grooves. Electron microscopy images show how centrifugal iso-finishing blends ridges and grooves into an isotropic surface. Before and after comparisons demonstrate how centrifugal iso-finishing transforms surfaces from an as-ground finish into a neutral to negatively skewed isotropic surface that provides a more efficient bearing surface. The document promotes contacting the author for free sample processing or contract deburring and finishing services.
Experimental Study Using Different Tools/Electrodes E.G. Copper, Graphite on...
This document presents research on comparing the performance of copper and graphite electrodes in an electrical discharge machining (EDM) process. Experiments were conducted to determine the effect of process parameters like current, impulse duration, and spark gap on the material removal rate (MRR) of mild steel. Regression analysis was used to develop a model relating the process parameters to MRR. The results showed that at lower parameter levels, graphite electrodes produced a higher MRR. However, as the parameter levels increased, copper electrodes provided a higher MRR. It was concluded that graphite electrodes are best for lower parameter levels and finishing work due to lower MRR, while copper electrodes are suitable for high material removal processes with less emphasis on surface finish
1 s2.0-s2212827114000377-main
This document discusses an experiment that investigated the influence of different clamping systems on drilling carbon fiber reinforced plastics. The researchers tested 3-point, 4-point, and ring clamping systems with varying distances between the drill axis and clamping points. They measured process forces during drilling and analyzed resulting delamination and fiber pullouts. The results showed that increasing the distance between the drill axis and clamping points significantly increased process forces and surface damage. Damage was generally greater on the bottom surface of workpieces compared to the top. Ring clamping produced less damage than 3-point or 4-point systems as distance increased.
Mp 1-unit - iv - sheet metal processes
This document discusses various sheet metal processes and forming operations. It describes common sheet metal materials and characteristics. Various presses and cutting dies are discussed for operations like blanking, piercing, and bending. Specific forming processes like drawing, stretching, spinning, hydroforming and magnetic pulse forming are explained. Tests for assessing formability of sheet metals are also summarized.
Kachlakev_RC Control Beam MSC-Marc_wAppendix
This document analyzes a reinforced concrete control beam tested by Kachlakev using nonlinear finite element techniques in MSC/Marc, Ansys, and Abaqus. It summarizes the geometry and material properties of the control beam, presents the finite element model idealization and boundary conditions, and compares the load-deflection curves from the finite element analysis to experimental test data. The analysis aims to predict the beam's load capacity and cracking behavior using different modeling approaches.
Metal 3d printing services in mumbai ppt
3D Printing Service Improves your business strategy and speeds up your innovation. It starts manufacturing high-quality products to cutting edge 3D printing technologies. The popularity of Metal 3D Printing goes to the variety of its materials.
REU_poster_CynthiaYu-v.8.p
1) The document describes research into fabricating 3D self-rolled thin-film structures for use in high density energy storage devices like lithium-ion batteries.
2) Using techniques like angled e-beam deposition and selective etching, the researchers were able to form rolled-up nanotube structures with diameters controlled down to the micrometer scale from thin films of materials like silicon, gold, and titanium.
3) Preliminary results show the 3D nanotube architecture allows for a small volume footprint with a large surface area, which could provide advantages for lithium-ion batteries by accommodating high volume expansion during charging and discharging over many cycles.
Optimization of MRR in EDM Process with Different Job Material i.e Stainless ...
Electro discharge machining (EDM) has been recognized as an efficient method of producing dies and machining of hard material such as ceramics and high strength metal matrix composites for the modern metal industry (1). In this process the metal are remove through melting or vaporization of job metal by high frequency spark discharge. Although in this process the metal removal rate is lower than the other non-conventional machining process. But the dimensional accuracy is higher than the other process and more complex shape can be produce generally composite material are fascinated as thy exhibit exceptional mechanical and physical properties such as high strength, high hardness, and high density at elevated temperature. For this extra ordinary behavior it has wide range of application on the metal industries like aerospace, dies or mould making industries, automobiles industries etc. The metal removal rate (M.R.R.) and surface smoothness not only depend on the selection of tool material also depend on the number of input parameter (such-input current, voltage, spindle speed, duty factor, dielectric medium), job metal property (conductivity ,hardness, strength, density etc.),machine condition and machining condition(machine performances, temperature, depth of cut or area of cut etc.). It is most difficult to select machining condition for optimal performances due to large number of parameters and inherent complexity of material removal mechanism taking place in EDM process. In the present work, the experiments were conducted using Taguchi L9 orthogonal approach, to ascertain the effect of EDM process parameters on material removal rate (MRR) of stain less steel and cast iron by using tool material such copper and graphite.
Final Report Functional Coatings for 3D Printed Parts_JONATHANAMBROSE
This report details the development of functional coatings for 3D printed parts through two techniques: creating a uniform conductive coating and electroplating homogenously. The stages of development included multiple techniques that were tested for value, simplicity, quality of coating, cost, material properties and safety. Testing found that combining conductive coating and electroplating onto 3D printed parts successfully enhanced properties like electrical conductivity, strength and hardness from the incorporated metal coating, with increased corrosion resistance. The report provides information on the techniques researched and tested as well as recommendations for further development.
Metal 3d printing services in mumbai ppt
3D Printing Service Improves your business strategy and speeds up your innovation. It starts manufacturing high-quality products to cutting edge 3D printing technologies. The popularity of Metal 3D Printing goes to the variety of its materials.
International Journal of Computational Engineering Research(IJCER)
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity
3D Profilometry of 17th Century Morison Copper Plates
This document discusses using 3D profilometry to analyze 17th century copper printing plates from Morison's Herbarium. It provides background on 3D profilometry and its uses. The document then details how 3D profilometry was used to clean and conserve Morison plates held at the Bodleian Library, allowing measurement of engraving depths and analysis of surface corrosion before and after cleaning. The analysis revealed cleaning did not damage the plates but helped restore and conserve them, while also showing the precision of the original engravings.
IMAPS - 2009 Mohammad Chowdhury
¬¬Mechanically Punched Micro Via Fabrication Process in LCP Substrate for RF-MEMS and Related Electronic Packaging Applications
23 steel 29
The International Institute for Science, Technology and Education (IISTE) , International Journals Call for papaers: http://www.iiste.org/Journals
A Review of Issues in Photochemical Machining
This document discusses photochemical machining (PCM), including a review of the background, process steps, experimental setup, selection of parameters, and conclusions. The key points are:
1) PCM is a non-conventional machining process that uses controlled chemical dissolution to produce burr-free, stress-free metal components. It employs chemical etching through a photoresist stencil.
2) The development of photoresists in the 1950s helped launch the commercial PCM industry. Research has focused on improving process technology, materials, and applications.
3) The PCM process involves preparing a phototool or stencil, applying photoresist, etching the material, and removing remaining
Experimental Study of Wear Rate Coefficient of Aluminium Hybrid Composites Ma...
In current decade, demand in material characteristics like light weight, superior strength to weight ratio, improved surface properties and enhanced wear resistance for complex engineering applications like automobile, aerospace and nuclear are researcher’s interest. However, performance of hybrid composites depends on right combination of reinforcements. Silicon carbide, silicon nitride, boron nitride and titanium carbide are few reinforcements available at present. In this work, Al356 is reinforced with SiC and B4C to enhance the mechanical properties, surface hardness and wear resistance. This hybrid composite is prepared by stir casting technique and the morphology of composite is studied using optical microscope to investigate the dispersion of reinforcements. In the present study, the wear and friction characteristics of hybrid composites are investigated using pin on disc dry wear tests by varying the load and speed and the results are tabulated for load vs mass loss, load vs wear rate and load vs wear coefficient. The results report that wear rate of hybrid composites are lower than that of binary composites. Mechanical properties, surface hardness and wear characteristics of aluminium hybrid composites are compared with that of aluminium binary composites available at present.
3341901 me ii-lab_manual_prepared by vipul hingu
This document provides instructions for experiments on a lathe machine. It includes:
1) An overview of the lathe machine and terminology used like cutting speed, depth of cut, feed rate, and metal removal rate.
2) Details of experiments that will study the effects of varying cutting parameters and material types on tool life, surface finish, and chip formation.
3) Instructions for a turning job on a lathe machine, which will involve operations like plain turning, tapering, threading, grooving, chamfering, and knurling.
4) Specifications of the lathe machine that will be used for the job.
Self Introduction Chao Lu Columbia University
Chao Lu is a Master of Science graduate in Mechanical Engineering from Columbia University. He has experience in manufacturing design, finite element analysis, and laser processing. His education background includes a focus on automotive engineering from Tongji University and non-traditional manufacturing and FEA from Columbia University. His project experience includes laser scribing, thermal-structure analysis, transmission analysis, and water distributor design. He has worked in internships focusing on testing, design, and product adaptation. His technical skills include FEA software, CAD, manufacturing processes, programming, and computer applications.
Simpleware and Abaqus
Generate very high-quality models for Abaqus using Simpleware software's 3D image data (MRI, CT, micro-CT...) to model solutions.
Nondestructive Approach to Evaluate Defects in Elements of Agricultural Machi...
Nondestructive Approach to Evaluate Defects in Elements of Agricultural Machi...Engr. Md. Nur-A-Alam
The document describes developing a nondestructive testing method to detect defects in agricultural machinery parts. A four-point probe potential drop technique was used to measure voltage changes caused by internal cracks or defects. Tests were conducted on mild steel, stainless steel, and carbon steel samples with varying crack depths. The results showed that voltage drop increased with resistance and differed by material composition. A computer program was created to calculate resistivity and voltage drop from the experimental data, allowing defects to be detected nondestructively.Modeling of Morphology and Deflection Analysis of Copper Alloys
This document discusses modeling the morphology and deflection analysis of copper alloys during thin wall machining. It presents an experimental investigation to determine optimal cutting conditions for machining thin walls of copper plates. The experiments used Taguchi methods to analyze the impact of cutting speed, feed rate, and depth of cut on surface roughness and part deflection. Analysis of variance (ANOVA) was then used to determine the correlation between these output responses and the cutting parameters, identifying the optimum conditions for thin wall machining of copper. The results showed that with appropriate process parameters, it is possible to end mill thin walls in copper as thin as 0.5mm with an aspect ratio of 48 and achieve a good surface finish and minimal deflection.
Compdyn po
This document summarizes Pierluigi Olmati's presentation on using Monte Carlo analysis to develop fragility curves for assessing blast resistance of reinforced concrete walls. The presentation includes: an introduction, definitions of component damage levels and response parameters, description of the blast scenario and target wall, an explanation of how fragility curves are developed through Monte Carlo simulation, and planned conclusions. Fragility curves show the probability of a component exceeding a damage state given a certain intensity measure, and are used to evaluate blast resistance of the concrete wall.
Experimental Study on Flexural Behaviour of Steel Beam at Diverse Loading
This study experimentally analyzed the flexural behavior of steel channel sections (ISMC75) under different loading conditions. The channel section was tested as a simply supported beam under two-point loading applied at either the web or flange. When loaded at the flange, the channel section carried 47% higher loads than when loaded at the web, reaching its plastic moment capacity. Deflections were also higher under flange loading. The results provide data on the flexural behavior and load-carrying capacity of channel sections based on the point of load application.
IRJET- Cold Formed Steel Lipped Zed Section with and without Web Holes –Web C...
1. The study investigated the web crippling behavior of cold-formed steel lipped zed sections with and without circular web holes through theoretical analysis, experimental testing, and finite element analysis using ANSYS.
2. Theoretical analysis was conducted based on IS 801-1975 and BS 5950-1998 design codes, experimental testing involved flexural testing of sections under uniformly distributed loading with and without web holes, and finite element models were developed to analyze web crippling behavior.
3. The results found that the ratio of the web hole depth to the web depth and the distance from the edge of the bearing divided by the flat depth of the web influenced web crippling. Theoretical values were higher than
PATIL_ABHISHEK
This document summarizes research into a novel 3D printing technique called Projection-based Electro-Stereolithography (PES). PES uses electrostatic deposition and in-situ photopolymerization to 3D print polymer-particle composites with controlled dispersion patterns at microscopic resolutions of 0.5mm. The research goal is to expand the range of printable materials. The document outlines the PES process and hardware, presents test cases demonstrating control of vertical, horizontal, and lateral particle distribution patterns, and concludes the technique was validated and can embed particles in polymer in three-dimensional patterns layer-by-layer.
MFI Mass Finishing Equipment and Media
Centrifugal Iso-Finishing is a high-speed, high-quality and hands-free method for deburring, smoothing, surface-0finishing, burnishing and polishing of work-pieces and parts. Contact Dave Davidson for additional technical information and assistance with getting your parts sample finished. Contact me at ddavidson@deburring-tech-group.com See also dryfinish.wordpress.com
Centrifugal Iso-Finishing
Technical article reprint on the high-speed and high-intensity and high-quality Centrifugal iso-Finishing method.. The methods used widely on aerospace, motorsports, automotive, medical, dental, orthodontic and jewelry manufactured parts. For additional information contact Dave Davidson at ddavidson@deburring-tech-group.com. Ask about the free sample part finishing program.
See also the technical blog at https://dryfinish.wordpress.com
More Related Content
Similar to 3 d metal parts-isotropic finish
Metal 3d printing services in mumbai ppt
3D Printing Service Improves your business strategy and speeds up your innovation. It starts manufacturing high-quality products to cutting edge 3D printing technologies. The popularity of Metal 3D Printing goes to the variety of its materials.
REU_poster_CynthiaYu-v.8.p
1) The document describes research into fabricating 3D self-rolled thin-film structures for use in high density energy storage devices like lithium-ion batteries.
2) Using techniques like angled e-beam deposition and selective etching, the researchers were able to form rolled-up nanotube structures with diameters controlled down to the micrometer scale from thin films of materials like silicon, gold, and titanium.
3) Preliminary results show the 3D nanotube architecture allows for a small volume footprint with a large surface area, which could provide advantages for lithium-ion batteries by accommodating high volume expansion during charging and discharging over many cycles.
Optimization of MRR in EDM Process with Different Job Material i.e Stainless ...
Electro discharge machining (EDM) has been recognized as an efficient method of producing dies and machining of hard material such as ceramics and high strength metal matrix composites for the modern metal industry (1). In this process the metal are remove through melting or vaporization of job metal by high frequency spark discharge. Although in this process the metal removal rate is lower than the other non-conventional machining process. But the dimensional accuracy is higher than the other process and more complex shape can be produce generally composite material are fascinated as thy exhibit exceptional mechanical and physical properties such as high strength, high hardness, and high density at elevated temperature. For this extra ordinary behavior it has wide range of application on the metal industries like aerospace, dies or mould making industries, automobiles industries etc. The metal removal rate (M.R.R.) and surface smoothness not only depend on the selection of tool material also depend on the number of input parameter (such-input current, voltage, spindle speed, duty factor, dielectric medium), job metal property (conductivity ,hardness, strength, density etc.),machine condition and machining condition(machine performances, temperature, depth of cut or area of cut etc.). It is most difficult to select machining condition for optimal performances due to large number of parameters and inherent complexity of material removal mechanism taking place in EDM process. In the present work, the experiments were conducted using Taguchi L9 orthogonal approach, to ascertain the effect of EDM process parameters on material removal rate (MRR) of stain less steel and cast iron by using tool material such copper and graphite.
Final Report Functional Coatings for 3D Printed Parts_JONATHANAMBROSE
This report details the development of functional coatings for 3D printed parts through two techniques: creating a uniform conductive coating and electroplating homogenously. The stages of development included multiple techniques that were tested for value, simplicity, quality of coating, cost, material properties and safety. Testing found that combining conductive coating and electroplating onto 3D printed parts successfully enhanced properties like electrical conductivity, strength and hardness from the incorporated metal coating, with increased corrosion resistance. The report provides information on the techniques researched and tested as well as recommendations for further development.
Metal 3d printing services in mumbai ppt
3D Printing Service Improves your business strategy and speeds up your innovation. It starts manufacturing high-quality products to cutting edge 3D printing technologies. The popularity of Metal 3D Printing goes to the variety of its materials.
International Journal of Computational Engineering Research(IJCER)
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity
3D Profilometry of 17th Century Morison Copper Plates
This document discusses using 3D profilometry to analyze 17th century copper printing plates from Morison's Herbarium. It provides background on 3D profilometry and its uses. The document then details how 3D profilometry was used to clean and conserve Morison plates held at the Bodleian Library, allowing measurement of engraving depths and analysis of surface corrosion before and after cleaning. The analysis revealed cleaning did not damage the plates but helped restore and conserve them, while also showing the precision of the original engravings.
IMAPS - 2009 Mohammad Chowdhury
¬¬Mechanically Punched Micro Via Fabrication Process in LCP Substrate for RF-MEMS and Related Electronic Packaging Applications
23 steel 29
The International Institute for Science, Technology and Education (IISTE) , International Journals Call for papaers: http://www.iiste.org/Journals
A Review of Issues in Photochemical Machining
This document discusses photochemical machining (PCM), including a review of the background, process steps, experimental setup, selection of parameters, and conclusions. The key points are:
1) PCM is a non-conventional machining process that uses controlled chemical dissolution to produce burr-free, stress-free metal components. It employs chemical etching through a photoresist stencil.
2) The development of photoresists in the 1950s helped launch the commercial PCM industry. Research has focused on improving process technology, materials, and applications.
3) The PCM process involves preparing a phototool or stencil, applying photoresist, etching the material, and removing remaining
Experimental Study of Wear Rate Coefficient of Aluminium Hybrid Composites Ma...
In current decade, demand in material characteristics like light weight, superior strength to weight ratio, improved surface properties and enhanced wear resistance for complex engineering applications like automobile, aerospace and nuclear are researcher’s interest. However, performance of hybrid composites depends on right combination of reinforcements. Silicon carbide, silicon nitride, boron nitride and titanium carbide are few reinforcements available at present. In this work, Al356 is reinforced with SiC and B4C to enhance the mechanical properties, surface hardness and wear resistance. This hybrid composite is prepared by stir casting technique and the morphology of composite is studied using optical microscope to investigate the dispersion of reinforcements. In the present study, the wear and friction characteristics of hybrid composites are investigated using pin on disc dry wear tests by varying the load and speed and the results are tabulated for load vs mass loss, load vs wear rate and load vs wear coefficient. The results report that wear rate of hybrid composites are lower than that of binary composites. Mechanical properties, surface hardness and wear characteristics of aluminium hybrid composites are compared with that of aluminium binary composites available at present.
3341901 me ii-lab_manual_prepared by vipul hingu
This document provides instructions for experiments on a lathe machine. It includes:
1) An overview of the lathe machine and terminology used like cutting speed, depth of cut, feed rate, and metal removal rate.
2) Details of experiments that will study the effects of varying cutting parameters and material types on tool life, surface finish, and chip formation.
3) Instructions for a turning job on a lathe machine, which will involve operations like plain turning, tapering, threading, grooving, chamfering, and knurling.
4) Specifications of the lathe machine that will be used for the job.
Self Introduction Chao Lu Columbia University
Chao Lu is a Master of Science graduate in Mechanical Engineering from Columbia University. He has experience in manufacturing design, finite element analysis, and laser processing. His education background includes a focus on automotive engineering from Tongji University and non-traditional manufacturing and FEA from Columbia University. His project experience includes laser scribing, thermal-structure analysis, transmission analysis, and water distributor design. He has worked in internships focusing on testing, design, and product adaptation. His technical skills include FEA software, CAD, manufacturing processes, programming, and computer applications.
Simpleware and Abaqus
Generate very high-quality models for Abaqus using Simpleware software's 3D image data (MRI, CT, micro-CT...) to model solutions.
Nondestructive Approach to Evaluate Defects in Elements of Agricultural Machi...
Nondestructive Approach to Evaluate Defects in Elements of Agricultural Machi...Engr. Md. Nur-A-Alam
The document describes developing a nondestructive testing method to detect defects in agricultural machinery parts. A four-point probe potential drop technique was used to measure voltage changes caused by internal cracks or defects. Tests were conducted on mild steel, stainless steel, and carbon steel samples with varying crack depths. The results showed that voltage drop increased with resistance and differed by material composition. A computer program was created to calculate resistivity and voltage drop from the experimental data, allowing defects to be detected nondestructively.Modeling of Morphology and Deflection Analysis of Copper Alloys
This document discusses modeling the morphology and deflection analysis of copper alloys during thin wall machining. It presents an experimental investigation to determine optimal cutting conditions for machining thin walls of copper plates. The experiments used Taguchi methods to analyze the impact of cutting speed, feed rate, and depth of cut on surface roughness and part deflection. Analysis of variance (ANOVA) was then used to determine the correlation between these output responses and the cutting parameters, identifying the optimum conditions for thin wall machining of copper. The results showed that with appropriate process parameters, it is possible to end mill thin walls in copper as thin as 0.5mm with an aspect ratio of 48 and achieve a good surface finish and minimal deflection.
Compdyn po
This document summarizes Pierluigi Olmati's presentation on using Monte Carlo analysis to develop fragility curves for assessing blast resistance of reinforced concrete walls. The presentation includes: an introduction, definitions of component damage levels and response parameters, description of the blast scenario and target wall, an explanation of how fragility curves are developed through Monte Carlo simulation, and planned conclusions. Fragility curves show the probability of a component exceeding a damage state given a certain intensity measure, and are used to evaluate blast resistance of the concrete wall.
Experimental Study on Flexural Behaviour of Steel Beam at Diverse Loading
This study experimentally analyzed the flexural behavior of steel channel sections (ISMC75) under different loading conditions. The channel section was tested as a simply supported beam under two-point loading applied at either the web or flange. When loaded at the flange, the channel section carried 47% higher loads than when loaded at the web, reaching its plastic moment capacity. Deflections were also higher under flange loading. The results provide data on the flexural behavior and load-carrying capacity of channel sections based on the point of load application.
IRJET- Cold Formed Steel Lipped Zed Section with and without Web Holes –Web C...
1. The study investigated the web crippling behavior of cold-formed steel lipped zed sections with and without circular web holes through theoretical analysis, experimental testing, and finite element analysis using ANSYS.
2. Theoretical analysis was conducted based on IS 801-1975 and BS 5950-1998 design codes, experimental testing involved flexural testing of sections under uniformly distributed loading with and without web holes, and finite element models were developed to analyze web crippling behavior.
3. The results found that the ratio of the web hole depth to the web depth and the distance from the edge of the bearing divided by the flat depth of the web influenced web crippling. Theoretical values were higher than
PATIL_ABHISHEK
This document summarizes research into a novel 3D printing technique called Projection-based Electro-Stereolithography (PES). PES uses electrostatic deposition and in-situ photopolymerization to 3D print polymer-particle composites with controlled dispersion patterns at microscopic resolutions of 0.5mm. The research goal is to expand the range of printable materials. The document outlines the PES process and hardware, presents test cases demonstrating control of vertical, horizontal, and lateral particle distribution patterns, and concludes the technique was validated and can embed particles in polymer in three-dimensional patterns layer-by-layer.
Similar to 3 d metal parts-isotropic finish (20)
Optimization of MRR in EDM Process with Different Job Material i.e Stainless ...
Optimization of MRR in EDM Process with Different Job Material i.e Stainless ...
Final Report Functional Coatings for 3D Printed Parts_JONATHANAMBROSE
Final Report Functional Coatings for 3D Printed Parts_JONATHANAMBROSE
International Journal of Computational Engineering Research(IJCER)
International Journal of Computational Engineering Research(IJCER)
3D Profilometry of 17th Century Morison Copper Plates
3D Profilometry of 17th Century Morison Copper Plates
Experimental Study of Wear Rate Coefficient of Aluminium Hybrid Composites Ma...
Experimental Study of Wear Rate Coefficient of Aluminium Hybrid Composites Ma...
Nondestructive Approach to Evaluate Defects in Elements of Agricultural Machi...
Nondestructive Approach to Evaluate Defects in Elements of Agricultural Machi...
Modeling of Morphology and Deflection Analysis of Copper Alloys
Modeling of Morphology and Deflection Analysis of Copper Alloys
Experimental Study on Flexural Behaviour of Steel Beam at Diverse Loading
Experimental Study on Flexural Behaviour of Steel Beam at Diverse Loading
IRJET- Cold Formed Steel Lipped Zed Section with and without Web Holes –Web C...
IRJET- Cold Formed Steel Lipped Zed Section with and without Web Holes –Web C...
More from Dave Davidson
MFI Mass Finishing Equipment and Media
Centrifugal Iso-Finishing is a high-speed, high-quality and hands-free method for deburring, smoothing, surface-0finishing, burnishing and polishing of work-pieces and parts. Contact Dave Davidson for additional technical information and assistance with getting your parts sample finished. Contact me at ddavidson@deburring-tech-group.com See also dryfinish.wordpress.com
Centrifugal Iso-Finishing
Technical article reprint on the high-speed and high-intensity and high-quality Centrifugal iso-Finishing method.. The methods used widely on aerospace, motorsports, automotive, medical, dental, orthodontic and jewelry manufactured parts. For additional information contact Dave Davidson at ddavidson@deburring-tech-group.com. Ask about the free sample part finishing program.
See also the technical blog at https://dryfinish.wordpress.com
Modern machine-shop-apr-18 centrifugal isofinishing crnakshafts
See the technical article on Centrifugal Iso-Finishing on surface finish and it's effect on engine components in the Motorsports Industry terms of performance improvement.
Contact D. A. (Dave) Davidson at ddavidson@deburring-tech-group.com for additional information or help with free sample finishing.
Centrifugal Iso-Finishing Technical article as seen in Products Finishing mag...
Centrifugal iso-finishing is a high-speed mass finishing method that can produce very refined surface finishes on parts in short cycle times. It can be used for deburring, contouring edges, and developing surface finishes that improve part performance, integrity, and lifespan. Centrifugal iso-finishing involves processing parts with abrasives or polishing materials under high surface pressure to truncate peaks and create uniformly compressed stresses in the surface. This improves part wear resistance, fatigue resistance, and ability to withstand repeated stresses compared to surfaces finished by conventional methods.
Iso-Finishing sample part finishing application form
Free sample part processing and quotations for deburring, finishing or polishing of your production parts.
(1) Download the Word document form into your computer.
(2) Complete the form and include a paper copy with your sample parts to being shipped to the Isofinishing address shown on the form
MFI full finishing product catalog with technical assistance info
Mass Finishing Equipment and Supply Catalog includes equipment, finishing media, supplies and accessories. Features Centrifugal Iso-Finishing equipment for high-speed and hands-free deburring, finishing and polishing. For technical assistance and help with arranging for free sample finishing of your parts contact Dave Dagvidson at ddavidson@deburring-tech-group.com
It's the Finish that Counts. Technical Magazine article reprint.
A conventionally produced surface (turned, milled,
ground, EDM) is typically Gaussian in nature, that is,
the peak and valley distribution is pretty much equal
in height. This type of surface can be very unstable and
unpredictable when wear and load bearing are considered. The images in Figure 1 demonstrate this type of
surface.
There are many ways to produce plateaued surfaces.
They are varied in approach but all have the ability to
control the surface peak characteristics separately for
the valley characteristics. Methods that are used to improve surfaces for performance and increased service life include centrifugal barrel finishing, turbo-abrasive machining (aka Turbo-Finish) and isotropic micro-finishing with vibratory finishing equipment. For additional technical information and/or elp with free sample part processing contact Dave Davidson at ddavidson@deburring-tech-group.om
Gear Finishing Technical Intewrview
Modern machine shop interviews Dave Davidson about Gear finishing processes. For additional technical information and assistance with sample part finishing contact Dave Davidson | ddavidson@deburring-tech-group.com # #machining #polishing #finish #cnc #manufacturingengineering #automotiveindustry #finishing #deburring #leanmanufacturing #aerospace #massfinishing #grinding #automotive #leanmaufacturing #gears
BV PRODUCTS - Bowl and Tub Vibratory Finishing Systems
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV PRODUCTS VIBRATORY FINISHING SYSTEMS FOR DEBURRING AND FINISHING
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV Products - Vibratory Finishing machinery for deburring and polishing
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV Products TECHNOVIBE Series
Vibratory finishing machines designed, engineered and built in Australia that out-perform and out-last vibratory finishing machines costing much more. Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
Centrifugal Iso-Finishing for Additive Manufactured Parts
Centrifugal Iso-Finishing Technology is used on 3D Printed and conventional CNC precision machined components for deburring, finishing and polishing. It is a high-speed, high-quality hands-free finishing method that produces highly refined surface finishes in a fraction of the time required by other equipment (10 times faster, in many cases) Free sample finishing of your parts is available, contact Dave Davidson at ddavidson@deburring-tech-group.com
Centrifugal iso finishing sample processing
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso finishing contract services
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso-Finishing 3D parts
This document discusses high-speed post-processing of 3D printed parts using centrifugal iso-finishing to speed up workflows and reduce bottlenecks. It invites contacting the sender to arrange running sample parts through their free surface finishing program to see how it improves the process.
Centrifugal iso finishing - part dividers
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Final vibratory iso-finishing processes
High-Speed iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal Iso-Finishing Equipment
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso finishing - Equipment description
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish
https://lnkd.in/gFjetZk
More from Dave Davidson (20)
Modern machine-shop-apr-18 centrifugal isofinishing crnakshafts
Modern machine-shop-apr-18 centrifugal isofinishing crnakshafts
Centrifugal Iso-Finishing Technical article as seen in Products Finishing mag...
Centrifugal Iso-Finishing Technical article as seen in Products Finishing mag...
Iso-Finishing sample part finishing application form
Iso-Finishing sample part finishing application form
MFI full finishing product catalog with technical assistance info
MFI full finishing product catalog with technical assistance info
It's the Finish that Counts. Technical Magazine article reprint.
It's the Finish that Counts. Technical Magazine article reprint.
BV PRODUCTS - Bowl and Tub Vibratory Finishing Systems
BV PRODUCTS - Bowl and Tub Vibratory Finishing Systems
BV PRODUCTS VIBRATORY FINISHING SYSTEMS FOR DEBURRING AND FINISHING
BV PRODUCTS VIBRATORY FINISHING SYSTEMS FOR DEBURRING AND FINISHING
BV Products - Vibratory Finishing machinery for deburring and polishing
BV Products - Vibratory Finishing machinery for deburring and polishing
Centrifugal Iso-Finishing for Additive Manufactured Parts
Centrifugal Iso-Finishing for Additive Manufactured Parts
Recently uploaded
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.AI-Based Home Security System : Home security
Home security is of paramount importance in today's world, where we rely more on technology, home
security is crucial. Using technology to make homes safer and easier to control from anywhere is
important. Home security is important for the occupant’s safety. In this paper, we came up with a low cost,
AI based model home security system. The system has a user-friendly interface, allowing users to start
model training and face detection with simple keyboard commands. Our goal is to introduce an innovative
home security system using facial recognition technology. Unlike traditional systems, this system trains
and saves images of friends and family members. The system scans this folder to recognize familiar faces
and provides real-time monitoring. If an unfamiliar face is detected, it promptly sends an email alert,
ensuring a proactive response to potential security threats.
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
OOPS_Lab_Manual - programs using C++ programming language
This manual contains programs on object oriented programming concepts using C++ language.
Recently uploaded (20)
Zener Diode and its V-I Characteristics and Applications
Zener Diode and its V-I Characteristics and Applications
5G Radio Network Througput Problem Analysis HCIA.pdf
5G Radio Network Througput Problem Analysis HCIA.pdf
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
OOPS_Lab_Manual - programs using C++ programming language
OOPS_Lab_Manual - programs using C++ programming language
3 d metal parts-isotropic finish
- 1. Centrifugal Isotropic Hands-Free Finish on Scrap Metal 3-D Printed Parts -Documentation -- Slide 1 Raw part, as printed being characterized by optical interferometry SME MMR Isotropic Surface Finish Research Project: Dave Davidson, dryfinish@gmail.com | dryfinish.wordpress.com | http://www.sme.org/mmr/ Jack Clark, jclark@surfaceanalytics.com | Surface Analytics | http://www.sme.org/mmr
- 2. Centrifugal Isotropic Hands-Free Finish on Scrap Metal 3-D Printed Parts -Documentation -- Slide 2 3-D optical characterization of unfinished 3-D printed part surfaces SME MMR Isotropic Surface Finish Research Project: Dave Davidson, dryfinish@gmail.com | dryfinish.wordpress.com | http://www.sme.org/mmr/ Jack Clark, jclark@surfaceanalytics.com | Surface Analytics | http://www.sme.org/mmr
- 3. Centrifugal Isotropic Hands-Free Finish on Scrap Metal 3-D Printed Parts -Documentation -- Slide 3 SME MMR Isotropic Surface Finish Research Project: Dave Davidson, dryfinish@gmail.com | dryfinish.wordpress.com | http://www.sme.org/mmr/ Jack Clark, jclark@surfaceanalytics.com | Surface Analytics | http://www.sme.org/mmr Experimental CBF Finishing on 3-D Metal Printed Parts. SEE: Slide 2 and 4 for 3-D optical map of surface before and after processing Part shown here after CBF Isotropic processing. Starting surface: 159 µin. Ra Finished surface: 4.9 µin. Ra
- 4. Centrifugal Isotropic Hands-Free Finish on Scrap Metal 3-D Printed Parts -Documentation -- Slide 4 SME MMR Isotropic Surface Finish Research Project: Dave Davidson, dryfinish@gmail.com | dryfinish.wordpress.com | http://www.sme.org/mmr/ Jack Clark, jclark@surfaceanalytics.com | Surface Analytics | http://www.sme.org/mmr