High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal Iso-Finishing is a high-speed, high-quality and hands-free method for deburring, smoothing, surface-0finishing, burnishing and polishing of work-pieces and parts. Contact Dave Davidson for additional technical information and assistance with getting your parts sample finished. Contact me at ddavidson@deburring-tech-group.com See also dryfinish.wordpress.com
Technical article reprint on the high-speed and high-intensity and high-quality Centrifugal iso-Finishing method.. The methods used widely on aerospace, motorsports, automotive, medical, dental, orthodontic and jewelry manufactured parts. For additional information contact Dave Davidson at ddavidson@deburring-tech-group.com. Ask about the free sample part finishing program.
See also the technical blog at https://dryfinish.wordpress.com
Modern machine-shop-apr-18 centrifugal isofinishing crnakshaftsDave Davidson
See the technical article on Centrifugal Iso-Finishing on surface finish and it's effect on engine components in the Motorsports Industry terms of performance improvement.
Contact D. A. (Dave) Davidson at ddavidson@deburring-tech-group.com for additional information or help with free sample finishing.
Centrifugal Iso-Finishing Technical article as seen in Products Finishing mag...Dave Davidson
This high-speed, high-intensity mass finishing
method can improve part performance. Centrifugal iso-finishing can be used not only for deburring and edge-contour, but also to
develop surface finish attributes that improve the performance,
surface integrity and service life of components.
A High-Speed, High-Energy Alternative
Centrifugal iso-finishing is a high-speed and high-intensity
mass finishing method in which abrasive or polishing materials are caused to interact with part edges and surfaces
with 10 times the surface pressure of low-energy finishing
methods. What this means, in practical terms, is that it is
possible to produce very refined surface finishes in abbreviated process cycle times. It also means that parts with
complex and detailed geometries can be deburred with a
minimum of manual intervention.
Iso-Finishing sample part finishing application formDave Davidson
Free sample part processing and quotations for deburring, finishing or polishing of your production parts.
(1) Download the Word document form into your computer.
(2) Complete the form and include a paper copy with your sample parts to being shipped to the Isofinishing address shown on the form
MFI full finishing product catalog with technical assistance infoDave Davidson
Mass Finishing Equipment and Supply Catalog includes equipment, finishing media, supplies and accessories. Features Centrifugal Iso-Finishing equipment for high-speed and hands-free deburring, finishing and polishing. For technical assistance and help with arranging for free sample finishing of your parts contact Dave Dagvidson at ddavidson@deburring-tech-group.com
It's the Finish that Counts. Technical Magazine article reprint.Dave Davidson
A conventionally produced surface (turned, milled,
ground, EDM) is typically Gaussian in nature, that is,
the peak and valley distribution is pretty much equal
in height. This type of surface can be very unstable and
unpredictable when wear and load bearing are considered. The images in Figure 1 demonstrate this type of
surface.
There are many ways to produce plateaued surfaces.
They are varied in approach but all have the ability to
control the surface peak characteristics separately for
the valley characteristics. Methods that are used to improve surfaces for performance and increased service life include centrifugal barrel finishing, turbo-abrasive machining (aka Turbo-Finish) and isotropic micro-finishing with vibratory finishing equipment. For additional technical information and/or elp with free sample part processing contact Dave Davidson at ddavidson@deburring-tech-group.om
Modern machine shop interviews Dave Davidson about Gear finishing processes. For additional technical information and assistance with sample part finishing contact Dave Davidson | ddavidson@deburring-tech-group.com # #machining #polishing #finish #cnc #manufacturingengineering #automotiveindustry #finishing #deburring #leanmanufacturing #aerospace #massfinishing #grinding #automotive #leanmaufacturing #gears
BV PRODUCTS - Bowl and Tub Vibratory Finishing SystemsDave Davidson
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV PRODUCTS VIBRATORY FINISHING SYSTEMS FOR DEBURRING AND FINISHINGDave Davidson
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV Products - Vibratory Finishing machinery for deburring and polishingDave Davidson
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
Vibratory finishing machines designed, engineered and built in Australia that out-perform and out-last vibratory finishing machines costing much more. Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
Centrifugal Iso-Finishing for Additive Manufactured PartsDave Davidson
Centrifugal Iso-Finishing Technology is used on 3D Printed and conventional CNC precision machined components for deburring, finishing and polishing. It is a high-speed, high-quality hands-free finishing method that produces highly refined surface finishes in a fraction of the time required by other equipment (10 times faster, in many cases) Free sample finishing of your parts is available, contact Dave Davidson at ddavidson@deburring-tech-group.com
Centrifugal iso finishing sample processingDave Davidson
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso finishing - part dividersDave Davidson
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Final vibratory iso-finishing processesDave Davidson
High-Speed iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso finishing - Equipment descriptionDave Davidson
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish
https://lnkd.in/gFjetZk
Centrifugal iso finishing - how it worksDave Davidson
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Centrifugal Iso-Finishing is a high-speed, high-quality and hands-free method for deburring, smoothing, surface-0finishing, burnishing and polishing of work-pieces and parts. Contact Dave Davidson for additional technical information and assistance with getting your parts sample finished. Contact me at ddavidson@deburring-tech-group.com See also dryfinish.wordpress.com
Technical article reprint on the high-speed and high-intensity and high-quality Centrifugal iso-Finishing method.. The methods used widely on aerospace, motorsports, automotive, medical, dental, orthodontic and jewelry manufactured parts. For additional information contact Dave Davidson at ddavidson@deburring-tech-group.com. Ask about the free sample part finishing program.
See also the technical blog at https://dryfinish.wordpress.com
Modern machine-shop-apr-18 centrifugal isofinishing crnakshaftsDave Davidson
See the technical article on Centrifugal Iso-Finishing on surface finish and it's effect on engine components in the Motorsports Industry terms of performance improvement.
Contact D. A. (Dave) Davidson at ddavidson@deburring-tech-group.com for additional information or help with free sample finishing.
Centrifugal Iso-Finishing Technical article as seen in Products Finishing mag...Dave Davidson
This high-speed, high-intensity mass finishing
method can improve part performance. Centrifugal iso-finishing can be used not only for deburring and edge-contour, but also to
develop surface finish attributes that improve the performance,
surface integrity and service life of components.
A High-Speed, High-Energy Alternative
Centrifugal iso-finishing is a high-speed and high-intensity
mass finishing method in which abrasive or polishing materials are caused to interact with part edges and surfaces
with 10 times the surface pressure of low-energy finishing
methods. What this means, in practical terms, is that it is
possible to produce very refined surface finishes in abbreviated process cycle times. It also means that parts with
complex and detailed geometries can be deburred with a
minimum of manual intervention.
Iso-Finishing sample part finishing application formDave Davidson
Free sample part processing and quotations for deburring, finishing or polishing of your production parts.
(1) Download the Word document form into your computer.
(2) Complete the form and include a paper copy with your sample parts to being shipped to the Isofinishing address shown on the form
MFI full finishing product catalog with technical assistance infoDave Davidson
Mass Finishing Equipment and Supply Catalog includes equipment, finishing media, supplies and accessories. Features Centrifugal Iso-Finishing equipment for high-speed and hands-free deburring, finishing and polishing. For technical assistance and help with arranging for free sample finishing of your parts contact Dave Dagvidson at ddavidson@deburring-tech-group.com
It's the Finish that Counts. Technical Magazine article reprint.Dave Davidson
A conventionally produced surface (turned, milled,
ground, EDM) is typically Gaussian in nature, that is,
the peak and valley distribution is pretty much equal
in height. This type of surface can be very unstable and
unpredictable when wear and load bearing are considered. The images in Figure 1 demonstrate this type of
surface.
There are many ways to produce plateaued surfaces.
They are varied in approach but all have the ability to
control the surface peak characteristics separately for
the valley characteristics. Methods that are used to improve surfaces for performance and increased service life include centrifugal barrel finishing, turbo-abrasive machining (aka Turbo-Finish) and isotropic micro-finishing with vibratory finishing equipment. For additional technical information and/or elp with free sample part processing contact Dave Davidson at ddavidson@deburring-tech-group.om
Modern machine shop interviews Dave Davidson about Gear finishing processes. For additional technical information and assistance with sample part finishing contact Dave Davidson | ddavidson@deburring-tech-group.com # #machining #polishing #finish #cnc #manufacturingengineering #automotiveindustry #finishing #deburring #leanmanufacturing #aerospace #massfinishing #grinding #automotive #leanmaufacturing #gears
BV PRODUCTS - Bowl and Tub Vibratory Finishing SystemsDave Davidson
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV PRODUCTS VIBRATORY FINISHING SYSTEMS FOR DEBURRING AND FINISHINGDave Davidson
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
BV Products - Vibratory Finishing machinery for deburring and polishingDave Davidson
Vibratory finishing machines designed, engineered and built-in Australia that out-perform and out-last vibratory finishing machines costing much more.
Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
Vibratory finishing machines designed, engineered and built in Australia that out-perform and out-last vibratory finishing machines costing much more. Robust design with direct-drive motor and integrated parts/media separation for economical vibratory finishing of metal parts. BV Products has been perfecting its unique all cast polyurethane vibratory finishing machines with direct-drive motion generators for almost 40 years to make them the most innovative and most cost-effective surface finishing solution in the industry. Contact Dave Davidson: ddavidson@deburring-tech-group.com
Centrifugal Iso-Finishing for Additive Manufactured PartsDave Davidson
Centrifugal Iso-Finishing Technology is used on 3D Printed and conventional CNC precision machined components for deburring, finishing and polishing. It is a high-speed, high-quality hands-free finishing method that produces highly refined surface finishes in a fraction of the time required by other equipment (10 times faster, in many cases) Free sample finishing of your parts is available, contact Dave Davidson at ddavidson@deburring-tech-group.com
Centrifugal iso finishing sample processingDave Davidson
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso finishing - part dividersDave Davidson
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Final vibratory iso-finishing processesDave Davidson
High-Speed iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Centrifugal iso finishing - Equipment descriptionDave Davidson
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish
https://lnkd.in/gFjetZk
Centrifugal iso finishing - how it worksDave Davidson
High-Speed, Hands-free deburring, iso-finishing and polishing of manufactured and 3D printed parts. Contact Dave Davidson for free sample finishing, technical assistance and contract deburring and iso-finish polishing at dryfinish@gmail.com | https://dryfinish.wixsite.com/iso-finish https://lnkd.in/gFjetZk
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
1. Centrifugal Iso-Finish
Contract Services
LEFT: Al Norby, Quality Assurance
Engineer prepares parts for iso-finish
processing in a Model HZ-220 Centrif-
ugal Iso-Finishing Machine
_______________________________
FREE Sample Finishing and Contract
Finish Quotations for deburring and iso-
finishing manufactured or 3D printed
parts. Contact Dave Davidson at dryfin-
ish@gmail.com to make arrangements.
Send Parts to:
ISOFINISHING (Process Engineering)
Attn: M. Klein and D. A. Davidson
50 South Medina Street
Loretta, MN 55357
CONTACT: