2.1. Synthesis of unzipped graphene oxide1. MWCNTs with outer.docx
•Download as DOCX, PDF•
0 likes•2 views
2.1. Synthesis of unzipped graphene oxide: 1. MWCNTs with outer diameters of 110-170 nm (1.0 g) was reacted with potassium permanganate (10 g) (1:10 mass ratio MWCNT to potassium permanganate in a vigorously-stirred mixture of concentrated sulfuric acid (280 ml) and concentrated phosphoric acid (32 ml) (9:1 acid ratio) at 65 C for 4 h. 2. The reaction mixture was then cooled to room temperature and poured over ice water (800 ml) containing hydrogen peroxide (40 ml, 30 %). 3. The resulting mixture was congealed overnight then filtered (0.2 mm mesh PTFE from Millipore), and washed in succession with hydrochloric acid (30 %), ethanol (100 %), and diethyl ether (anhydrous). 4. The final black material was dried at low heat (65 C) in a vacuum oven overnight. 2.2. Synthesis of conducting polymers 1. The pyrrole (0.8mol, 1.67ml) was dissolved in 30 ml of water and ethanol mixture (1:1) and sonicate for30 min. 2. Then ferric chloride solution (0.8 mol ferric chloride in 20 Ml of water, 2.6g) was added dropwise to the pyrrole under vigorous stirring for 24 h. 3. The obtained material was washed several times with a mixture of water and ethanol until the solution became colorless, and dried in a vacuum at 75 oC for 24 h. 2.3. Synthesis of nanocomposites 1. First, graphite oxide was dispersed in 50 ML of water under ultrasonication for 30 min. 2. The pyrrole (0.08 mol) was dissolved in 30 ML of water and ethanol mixture (1:1). 3. The resultant solution was then added to the dispersion of GO solution under ultrasonication for another 30 min. 4. The ferric chloride solution (0.04 mol ferric chloride in 20 Ml of water) was added dropwise to the pyrrole and GO mixture under vigorous stirring for 24 h. 5. The weight ratio of pyrrole to graphite oxide was varied as 99.5:0.5,and the resulting composite were donated as 0.5PPyGO, 6. The PPy/GO composites obtained was washed several times with a mixture of water and ethanol until the solution became colorless, and dried in a vacuum at 75 oC for 24 h. For comparison, the neat PPy was also polymerized by similar method without the presence of GO suspension. 2.5. Characterizations: The synthesized materials were characterized using variety of techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and BET Surface Area and Pore Size Distribution Measurement Techniques, and electrochemical measurements. More information of these techniques is given below I need you after reading the experiment analysis the data please ...
Report
Share
Report
Share
Recommended
Spectroscopic methods in inorganic chemistry 2019 IR
This document provides an overview of spectroscopic methods in inorganic chemistry, focusing on infrared (IR) spectroscopy and Raman spectroscopy. It discusses the interactions of light with molecules, polarity and dipole moments, absorption of energy, and the differences between IR and Raman spectroscopy. Factors that influence bond vibrational wavenumbers are outlined. Various stretching and bending vibrational modes are defined. Examples of analyzing IR spectra of inorganic compounds like zinc oxide and metal carbonyls are provided.
Thiourea mediated regioselective synthesis of symmetrical and unsymmetrical d...
This document describes a method for the regioselective synthesis of symmetrical and unsymmetrical thioethers from chloroisoquinolines using thiourea. The reaction produces isoquinoline-1-thiols under optimized thiourea conditions, and varying the amount of thiourea allows for the selective formation of either symmetrical thioethers or unsymmetrical thioethers. A proposed mechanism indicates that thiourea acts as a sulfur source in an aromatic nucleophilic substitution reaction to form an isothiouronium salt intermediate, which then produces the thiol or thioether products. This method avoids byproduct formation and provides a simplified and environmentally friendly approach for synthesizing various organosulfur
Synthesis and Application of Direct Dyes Derived From Terephthalic and Isopht...
Abstract: The synthesis of direct dyes derived from terephthalic and isophthalic acid using J and H- acids was
undertaken with the view of replacing benzidine moiety in the production of direct dyes. The amide derivatives
of isophthalic and terephthalic acids were used as the coupling components while aniline and its derivatives
were used as the source of diazo components. The amide derivatives were characterized by Gas
Chromatography/Mass Spectrometry and Infra-red analysis. The spectroscopic properties of the dyes in various
solvents were also examined and most of the dyes showed bathochromic shifts when the solvent was changed to
more polar solvents. The dyes also showed positive and negative halochromism with the addition of few drops of
hydrochloric acid (HCl). The synthesized dyes were applied to cotton fabrics and their performance properties
evaluated. They have good exhaustion in the presence of electrolyte and have good wash fastness properties
upon application of after-treating agents of values of 3-4, 4 and 4-5. They also had good fastness properties to
light of values between 4-7. Their resistance to rubbing and perspiration had values between 3 and 4-5. The
toxicity of the synthesized coupling components was studied using the Dietrich Lorke (LD50) method on Albino
miceand they were found to be non-toxic.
Key words: Benzidine, direct dyes, exhaustion, electrolyte, cotton, fastness.
Analysis of pollutants
This document describes several methods for analyzing levels of pollutants like lead in samples. It discusses gravimetric analysis to determine lead chromate levels through precipitation and weighing. It also describes titration methods using EDTA to chelate lead and determine the endpoint potentiometrically. Finally, it discusses using spectrophotometry to measure lead-dithizone complexes and amperometric titration to determine chromium levels in a sample.
Dna zolasyon y_ûntemler__
The document provides three methods for extracting DNA from fungi. Method 1 uses lysis buffer, potassium acetate, phenol/chloroform/isoamyl alcohol, chloroform/isoamyl alcohol, NaCl, ethanol, PEG solution and TE buffer to isolate DNA. Method 2 uses extraction buffer, nuclei lysis buffer, sarkosyl, chloroform and sodium acetate to precipitate DNA overnight. Method 3 is a CTAB extraction method that uses extraction buffer, nuclei lysis buffer, sarkosyl, chloroform and ethanol wash steps to isolate fungal DNA.
Analysis of diuretics
based on these analysis of diuretics having an several methods to identifing thier analytical techniques
Thermal properties and size distribution of lignins precipitated with sulphur...
Dissolution and fractionation of lignocellulosic material is a critical step of valorisation of lignins. Precipitated lignin was isolated from black liquor by sulphuric acid at four levels of concentration (5, 25, 50 and 72 % wt). A comparison study was performed through thermal and size properties. Theacid concentration influences of thermal properties of precipitated lignin. The acid concentration has an effect on changes in particle size of precipitated lignin. The results of thermogravimetric analysis indicated that the highest degradation of lignins appeared as an exothermic peak in range 470 - 650°C.The greatest weight loss in this section under an oxidation atmosphere was in the following order lignin 25 % wt (47.3 %), followed by lignin 72 % wt (45.0 %), lignin 5 % wt (43.6 %), and, smallest decline reached by lignin 50 % wt. The lowest temperature at the maximum degradation rate was determined for a sample of lignin 72 % wt at 488°C.
Synthesis and Application of Azo Disperse Reactive Dyes derived from p-Aminob...
Disperse reactive dyes were synthesized by diazotizing p-aminobenzaldehyde and coupling with different substituted pyridones and 2-naphthol. The dyeing performance of the dyes was assessed on polyester, nylon, cotton and wool fabrics. The dyes obtained gave various shades of yellow with good depth, brightness and leveling properties on the fabrics. The dyed fabric showed fairly good to very good light fastness and very good to excellent fastness to washing, hot pressing and rubbing. The dyebath exhaustion on the polyester, nylon, wool and cotton fabrics was found to be very good and fixation on wool was better than on cotton fabric.
Recommended
Spectroscopic methods in inorganic chemistry 2019 IR
This document provides an overview of spectroscopic methods in inorganic chemistry, focusing on infrared (IR) spectroscopy and Raman spectroscopy. It discusses the interactions of light with molecules, polarity and dipole moments, absorption of energy, and the differences between IR and Raman spectroscopy. Factors that influence bond vibrational wavenumbers are outlined. Various stretching and bending vibrational modes are defined. Examples of analyzing IR spectra of inorganic compounds like zinc oxide and metal carbonyls are provided.
Thiourea mediated regioselective synthesis of symmetrical and unsymmetrical d...
This document describes a method for the regioselective synthesis of symmetrical and unsymmetrical thioethers from chloroisoquinolines using thiourea. The reaction produces isoquinoline-1-thiols under optimized thiourea conditions, and varying the amount of thiourea allows for the selective formation of either symmetrical thioethers or unsymmetrical thioethers. A proposed mechanism indicates that thiourea acts as a sulfur source in an aromatic nucleophilic substitution reaction to form an isothiouronium salt intermediate, which then produces the thiol or thioether products. This method avoids byproduct formation and provides a simplified and environmentally friendly approach for synthesizing various organosulfur
Synthesis and Application of Direct Dyes Derived From Terephthalic and Isopht...
Abstract: The synthesis of direct dyes derived from terephthalic and isophthalic acid using J and H- acids was
undertaken with the view of replacing benzidine moiety in the production of direct dyes. The amide derivatives
of isophthalic and terephthalic acids were used as the coupling components while aniline and its derivatives
were used as the source of diazo components. The amide derivatives were characterized by Gas
Chromatography/Mass Spectrometry and Infra-red analysis. The spectroscopic properties of the dyes in various
solvents were also examined and most of the dyes showed bathochromic shifts when the solvent was changed to
more polar solvents. The dyes also showed positive and negative halochromism with the addition of few drops of
hydrochloric acid (HCl). The synthesized dyes were applied to cotton fabrics and their performance properties
evaluated. They have good exhaustion in the presence of electrolyte and have good wash fastness properties
upon application of after-treating agents of values of 3-4, 4 and 4-5. They also had good fastness properties to
light of values between 4-7. Their resistance to rubbing and perspiration had values between 3 and 4-5. The
toxicity of the synthesized coupling components was studied using the Dietrich Lorke (LD50) method on Albino
miceand they were found to be non-toxic.
Key words: Benzidine, direct dyes, exhaustion, electrolyte, cotton, fastness.
Analysis of pollutants
This document describes several methods for analyzing levels of pollutants like lead in samples. It discusses gravimetric analysis to determine lead chromate levels through precipitation and weighing. It also describes titration methods using EDTA to chelate lead and determine the endpoint potentiometrically. Finally, it discusses using spectrophotometry to measure lead-dithizone complexes and amperometric titration to determine chromium levels in a sample.
Dna zolasyon y_ûntemler__
The document provides three methods for extracting DNA from fungi. Method 1 uses lysis buffer, potassium acetate, phenol/chloroform/isoamyl alcohol, chloroform/isoamyl alcohol, NaCl, ethanol, PEG solution and TE buffer to isolate DNA. Method 2 uses extraction buffer, nuclei lysis buffer, sarkosyl, chloroform and sodium acetate to precipitate DNA overnight. Method 3 is a CTAB extraction method that uses extraction buffer, nuclei lysis buffer, sarkosyl, chloroform and ethanol wash steps to isolate fungal DNA.
Analysis of diuretics
based on these analysis of diuretics having an several methods to identifing thier analytical techniques
Thermal properties and size distribution of lignins precipitated with sulphur...
Dissolution and fractionation of lignocellulosic material is a critical step of valorisation of lignins. Precipitated lignin was isolated from black liquor by sulphuric acid at four levels of concentration (5, 25, 50 and 72 % wt). A comparison study was performed through thermal and size properties. Theacid concentration influences of thermal properties of precipitated lignin. The acid concentration has an effect on changes in particle size of precipitated lignin. The results of thermogravimetric analysis indicated that the highest degradation of lignins appeared as an exothermic peak in range 470 - 650°C.The greatest weight loss in this section under an oxidation atmosphere was in the following order lignin 25 % wt (47.3 %), followed by lignin 72 % wt (45.0 %), lignin 5 % wt (43.6 %), and, smallest decline reached by lignin 50 % wt. The lowest temperature at the maximum degradation rate was determined for a sample of lignin 72 % wt at 488°C.
Synthesis and Application of Azo Disperse Reactive Dyes derived from p-Aminob...
Disperse reactive dyes were synthesized by diazotizing p-aminobenzaldehyde and coupling with different substituted pyridones and 2-naphthol. The dyeing performance of the dyes was assessed on polyester, nylon, cotton and wool fabrics. The dyes obtained gave various shades of yellow with good depth, brightness and leveling properties on the fabrics. The dyed fabric showed fairly good to very good light fastness and very good to excellent fastness to washing, hot pressing and rubbing. The dyebath exhaustion on the polyester, nylon, wool and cotton fabrics was found to be very good and fixation on wool was better than on cotton fabric.
Methoxy porphyrins
This document summarizes research into the effects of methoxy-substituted metalloporphyrins as catalysts in the epoxidation of alkenes. Five different manganese tetraphenylporphyrin acetates were synthesized with varying numbers and positions of methoxy substituents on the phenyl rings. These porphyrins were then used as catalysts for the epoxidation of various alkenes using tetra-n-butylammonium hydrogen monopersulfate as the oxidant and imidazole as the axial ligand. The catalytic activity of the porphyrins followed the order: unmodified TPPMnOAc ≥ di-methoxy substituted T(2,3-
Determination of heavy metal ion.pptx
This document summarizes an experiment to determine heavy metallic ions in crude oil using HPLC. Key steps included extracting organic sulfur compounds from a vacuum gas oil sample using n-heptane, then methylating the extract to make the sulfur compounds more polar. The methylated fraction was injected into an HPLC column with a cyanopropyl phase to separate the individual methylated sulfur compounds. The methylation reaction allowed characterization of non-polar sulfides and thiophenes present in the oil sample.
Synthesis,characterization,thermal and kinetic photo chemical decomposition s...
The International Institute for Science, Technology and Education (IISTE). Science, Technology and Medicine Journals Call for Academic Manuscripts
Trihydrate alumina analysis
This document provides a method for determining the amount of trihydrate alumina (THA) in bauxite. The method involves digesting a bauxite sample in a bomb digester using sodium hydroxide solution at 145°C. The solution is then filtered, aliquoted, and titrated with a zinc sulfate solution using xylenol orange indicator. The volume of zinc sulfate used in the second titration, after adding ammonium fluoride, is then used to calculate the percentage of THA in the original bauxite sample. Reagents and equipment needed include balances, glassware, a bomb digester, indicators, digestion and buffer solutions, EDTA, and zinc sulfate.
Research capstone assignment
This document summarizes the progress made in synthesizing metal complexes to model the active site of the nickel-containing enzyme Ni-ARD. The synthesis involves creating ligands based on diamines and protecting/deprotecting groups. Zinc analogs will be made first for method development before synthesizing nickel complexes. So far, multi-step syntheses have yielded protected and deprotected ligands, with one ligand ready for metal coordination. Further work is needed to complete the targeted family of zinc and nickel complexes to study structure-function relationships at the Ni-ARD active site.
Effect of position of substituents on the exhaustion and thermodynamic parame...
This document discusses the effect of substituents on the properties of six monoazo acid and disperse dyes synthesized. It describes the diazotization and coupling reactions used to synthesize the dyes. Absorption properties including wavelength and molar extinction coefficient are reported. Thermodynamic parameters like standard affinity, heat of dyeing, and entropy of dyeing are determined for the dyes on nylon fabrics. Results show the acid dyes have higher exhaustion and thermodynamic values than the disperse dyes due to stronger dye-fiber interactions. Substituents like nitro groups cause bathochromic shifts while hindering planarity causes hypsochromic shifts in absorption wavelength. Standard affinity correlates positively with exhaustion percentage.
method for crude protein anylsis (Kjeldahl).pptx
This method was specifically developed by Danish
chemist, Johan G.C.T. Kjeldahl, in 1883 to determine
the nitrogen contents in organic and inorganic
substances (like foodstuffs, fertilizers, wastewater,
soil, feed, grain, and other substances).
⦿ This method is also used for estimating the crude
protein content in food.
N boc-3-pyrrolidinone
Product Usage
1-tert-butoxycarbonyl-3-pyrrolidone is a starting material and a useful intermediate in organic synthesis.
suzuki shy
1) Phenylboronic acid, sodium carbonate, 4-bromobenzoic acid, and palladium on carbon were mixed in a flask with water and refluxed for 30-40 minutes to perform a Suzuki coupling reaction.
2) After cooling, hydrochloric acid was added to precipitate the crude product, which was isolated by vacuum filtration.
3) The crude product was purified by recrystallization from a methanol/water solution, yielding the final product which was isolated by vacuum filtration and dried. The yield was 30% and the melting point was 219-220°C.
Presentation
This document describes an experiment to synthesize benzaldehyde through the catalytic oxidation of benzyl alcohol using manganese oxide.
Potassium permanganate, sulfuric acid, and ferrocene were used to synthesize manganese (IV) oxide, which was then tested through x-ray diffraction and found to be in an amorphous phase.
Benzyl alcohol, toluene, and the synthesized manganese oxide were heated in a round bottom flask with a condenser. Gas chromatography analysis found peaks indicating the presence of benzaldehyde, showing the reaction was successful in synthesizing the desired product. Further tests found the amorphous phase manganese oxide performed with higher conversion than the gamma phase.
New benzotriozole phthalocyanine nickel(ii) photostabilizer for low density p...
This document summarizes the synthesis and characterization of a new benzotriazole phthalocyanine nickel(II) complex to be used as a photostabilizer for low density polyethylene. The complex was prepared and characterized using elemental analysis and FT-IR spectroscopy. Experimental investigation showed that this complex acts as an excellent photostabilizer for LDPE, providing stabilization through multiple pathways, unlike commercial antioxidants which typically offer only single mechanisms of protection. Testing revealed that the complex performed better than LDPE samples containing other common antioxidants at preventing degradation when exposed to UV light over time. Therefore, the complex is a promising new photostabilizer for improving the UV resistance of LDPE.
Visible light assisted photocatalytic reduction of CO2 using a graphene oxide...
A new heteroleptic ruthenium complex containing 2-thiophenyl benzimidazole ligands was synthesized using a microwave technique and was immobilized to graphene oxide via covalent attachment. The synthesized catalyst was used for the photoreduction of carbon dioxide under visible light irradiation without using a sacrificial agent, which gave 2050 μmol g−1 cat methanol after 24 h of irradiation
84 014-oc-walkley-black
This document describes a modified Walkley-Black method for determining organic carbon content in soils. The method involves oxidizing organic carbon in a soil sample using potassium dichromate in sulfuric acid. Excess dichromate is then titrated with ferrous sulfate. Calculations are made to determine the percentage of organic carbon in the original soil sample based on the amount of dichromate reduced. The document provides details on reagents, equipment, procedures, calculations, and references for the wet oxidation method to approximate organic carbon content in soils for some applications.
Photo-Oxygenated Derivatives from Eugenol
Photo-oxygenation reaction was performed on eugenol (1) (2- methoxy-4-(2'-propenyl) phenol) in chloroform as a solvent and tetraphenyl porphrine (TPP) as singlet oxygen sensitizer. Irradiation of the reaction mixture was carried out by sodium lamp at -20 °C for six hrs., during which dry oxygen was allowed to pass through the reaction mixture. Two hydroperoxides (3) and (4) were formed. Eugenol methyl ether (2) was also photo-oxygenated under the same conditions of eugenol, where only the side chain was photo-oxygenated at position C-1' to give product (5). In addition to the epoxide derivative of eugenol methyl ester (8) was prepared and its reaction with aminoantipyrine was carried out to give product (9). Product (8) could be considered as a DNA- alkylating agent.
Photo-Oxygenated Derivatives from Eugenol
Photo-oxygenation reaction was performed on eugenol (1) (2- methoxy-4-(2'-propenyl) phenol) in
chloroform as a solvent and tetraphenyl porphrine (TPP) as singlet oxygen sensitizer. Irradiation of the reaction
mixture was carried out by sodium lamp at -20 °C for six hrs., during which dry oxygen was allowed to pass
through the reaction mixture. Two hydroperoxides (3) and (4) were formed. Eugenol methyl ether (2) was also
photo-oxygenated under the same conditions of eugenol, where only the side chain was photo-oxygenated at
position C-1' to give product (5). In addition to the epoxide derivative of eugenol methyl ester (8) was prepared
and its reaction with aminoantipyrine was carried out to give product (9). Product (8) could be considered as a
DNA- alkylating agent
некоторые о синтезе нанокомпозита на основе эпоксидки
The document describes three methods for preparing nanocomposites. The first method involves dissolving epoxy resin in acetone, adding nano-CaCO3 and dispersing it using mechanical stirring and ultrasonication. The solvent is then removed by heating and applying vacuum. The second method mixes epoxy resin with clay nanoparticles using mechanical mixing and ultrasonication. A curing agent is added and the mixture is cured. The third method uses a sol-gel process to mix epoxy resins, a toughening agent, hardener, and SiO2 nanoparticles. The components are mixed, ultrasonicated, degassed under vacuum, poured into a mold and cured at high temperature.
Thermochromic hydrogel
A surfactant free thermo-chromic hydrogel is a "Smart Hydrogel" which changes its color according to the surrounding acidity or basicity. The material used for the synthesis of the hydrogel is PVA-Borax gel network, and the pH sensitive dyes like phenolphthalein, Bromothymol Blue etc. are responsible for the color change behavior.
Non aq titrations unit 2
Non-aqueous titration has several advantages over aqueous titration:
1. Organic acids and bases insoluble in water can be soluble in non-aqueous solvents allowing them to be titrated.
2. A non-aqueous solvent may help separate two or more acids in a mixture so they can be titrated individually.
3. More substances can be titrated as the solubility and application ranges are enlarged for weak acids/bases that cannot be titrated in water.
Some common non-aqueous solvents used include acetic acid, acetonitrile, alcohols, DMF. Indicators suitable for specific titrations must be selected to indicate the endpoint
Synthesis of new chelating ion exchange resins derived from guaran and diviny...
New chelating ion exchange resin containing hydroximate of 5 amino salicylic acid was synthesized by incorporating it in divinylbenzene styrene (DVBS) copolymer. Hydrophilic polysaccharidematrix ofguaran was also used to incorporate hydroximate of 5 amino salicylic acid in it. The resin characteristics were studied by determining its bulk density, specific bulk volume, moisture content, degree of substitution and ion exchange capacity. The resin was characterized by means of IR spectra, Nitrogen content and pH titration. The distribution coefficient values of different metal ions namely Fe(II), Cu(II) , Zn(II) , Cd(II) , Co(II) , Ni(II), Ca(II), U(VI), Cr(VI) & W(VI) was carried out on these resins as a function of pH . Metal analysis was done by Atomic Absorption Spectrophotometer. The hydroximate derivative of guaran is found to be more selective than that of diving benzene co-polymer.
Lowry's method
This document outlines Lowry's method for determining the total protein content in a wheat flour sample. The method involves forming a complex between amino acids and copper sulfate in an alkaline solution, which is then reduced by phosphomolybdic and phosphotungstic acids to produce a blue color. The intensity of this color can be measured spectrophotometrically and is proportional to the protein content. The document details the reagents, sample preparation by precipitation and washing, using a BSA standard curve to quantify the unknown protein content in the wheat flour sample.
Business UseWeek 1 Assignment #1Instructions1. Plea.docx
Business Use
Week 1: Assignment #1
Instructions
1. Please read these two articles:
· Using forensics against a fitbit device to solve a murder: https://www.cbsnews.com/news/the-fitbit-alibi-21st-century-technology-used-to-help-solve-wisconsin-moms-murder/
· How Amazon Echo could be forensically analyzed! https://www.theverge.com/2017/1/6/14189384/amazon-echo-murder-evidence-surveillance-data
2. Then go around in your residence / dwelling (home, apartment, condo, etc) and be creative.
3. Identify at least five appliances or devices that you THINK could be forensically analyzed and then identify how this might be useful in an investigation. Note - do not count your computer or mobile device. Those are obvious!
4. I expect at least one paragraph answer for each device.
Why did I assign this?
The goal is to have you start THINKING about how any device, that is capable of holding electronic data (and transmitting to the Internet) could be useful in a particular investigation!
Due Date
This is due by Sunday, May 10th at 11:59PM
Surname 6
Informative speech on George Stinney Jr.
A. Info research analysis
The general purpose of the speech was to inform people about the civil injustice being done against the African American community in the United States. The specific purpose of the speech was to portray to the audience how an innocent 14-year old black boy suffered in the hands of the South Carolina State law enforcing officers. He was falsely accused of killing two white girls and electrocuted within two months after conviction.
I decided the topic of my speech after perusing through all the suggested topics ad found that the story of George Stinney Jr. was touching and emotional entirely.
This topic benefits the audience and the society in general by giving them an insight of the cruelty that the American law system has against the African American community. The audience gets to know how the shady investigations were done with claims that George had pleaded guilty to the charges of murder when there was no real evidence tying him to the crime or a signed plea agreement.
The alternative view that I found in the research was the version of the investigating officer of the case who claimed that the 14-year old boy managed to kill two girls aged 11 and 7 with a blunt object and ditch them in a nearby trench. This alternative point of view did not make sense because it is hard for a 14-year old boy to use the force that was reported by postmortem results to kill the girls. Therefore, I knew everything was a lie and I had to take the point of view of George’s innocence.
B. informative outline
Introduction:
George Stinney Jr. was an African American boy born on October 21, 1929 in Pinewood, South Carolina, U.S. He is considered as the youngest person to be executed by the United State government in 20th century.
Main body
Investigations of the alleged crimes (Bickford, 05)
The investigations concerning the alleged crimes of George S.
Business UsePALADIN ASSIGNMENT ScenarioYou are give.docx
Business Use
PALADIN ASSIGNMENT
Scenario:
You are given a PC and you are faced with this scenario: you don’t know the password to the PC which means you can’t login so you can use a forensic tool like FTK IMAGER to capture the hard drive as a bit-for-bit forensic image AND/OR
1. The hard drive is either soldiered onto the motherboard (there are some new hard drives like this!) or cannot be removed because the screws are stripped (this has happened to me);
2. Even if you figured out the password or got an admin password the PC may have its USB ports blocked via a GPO policy (this is very common in corporations now);
3. Even if you can get the GPO policy overridden you may have some concerns about putting it on the network (which is true especially if you are dealing with malware).
So what you can you do? The best solution is to boot the PC up into forensically sound environment that lets you bypass the password aspect; GPO policy; etc and take a bit-for-bit image. One software that has done the job very well for me is Paladin.
How to get points
If you can send me a screenshot showing me that you had installed Paladin .ISO and made your USB device a bootable device with Paladin using Rufus then you get 10 points.
If you can send me a screenshot showing that you had a chance to boot your computer into Paladin then you will earn an extra 10 points. It is not necessary for you to take a forensic image of your PC but I have included generic instructions here.
Assumptions:
1. You have downloaded Rufus on your computer
2. You have downloaded Paladin on your computer.
Instructions:
1. Make sure you have at least one USB drive.
2. If not down already, download Rufus from https://rufus.ie/.
3. If not done already, download the Paladin ISO image from this website: https://sumuri.com/product/paladin-64-bit-version-7/ which is free. It’s suggested price is $25.00 but you can adjust the price to $0 then order. To be clear – do not pay anything.
4. Insert the USB device in your computer.
5. Run Rufus where you install the Paladin .ISO file on the USB device and make it bootable. Now I could provide you step by step instructions, but this is a Masters class so I want you to explore a bit and figure this out. One good video is this: https://www.youtube.com/watch?v=V6JehM0WDTI.
6. After you are done using Rufus where you have installed Paladin.ISO on the USB device and made it bootable then make sure the USB device is in the PC.
7. Restart your PC. Press F9(HP) laptop) or F12 (Dell laptop) so you can be taken into the BIOS bootup menu.
8. This is where things get a bit tricky e.g. your compute may be configured differently where you have to adjust your BIOS settings. If you do not feel comfortable doing this then stop here. I do not want you to mess up your computer. You have already earned ten extra points!
9. If you still proceed then you will see a list of bootable devices. You may, for example, see a list of devices. Pick the device .
More Related Content
Similar to 2.1. Synthesis of unzipped graphene oxide1. MWCNTs with outer.docx
Methoxy porphyrins
This document summarizes research into the effects of methoxy-substituted metalloporphyrins as catalysts in the epoxidation of alkenes. Five different manganese tetraphenylporphyrin acetates were synthesized with varying numbers and positions of methoxy substituents on the phenyl rings. These porphyrins were then used as catalysts for the epoxidation of various alkenes using tetra-n-butylammonium hydrogen monopersulfate as the oxidant and imidazole as the axial ligand. The catalytic activity of the porphyrins followed the order: unmodified TPPMnOAc ≥ di-methoxy substituted T(2,3-
Determination of heavy metal ion.pptx
This document summarizes an experiment to determine heavy metallic ions in crude oil using HPLC. Key steps included extracting organic sulfur compounds from a vacuum gas oil sample using n-heptane, then methylating the extract to make the sulfur compounds more polar. The methylated fraction was injected into an HPLC column with a cyanopropyl phase to separate the individual methylated sulfur compounds. The methylation reaction allowed characterization of non-polar sulfides and thiophenes present in the oil sample.
Synthesis,characterization,thermal and kinetic photo chemical decomposition s...
The International Institute for Science, Technology and Education (IISTE). Science, Technology and Medicine Journals Call for Academic Manuscripts
Trihydrate alumina analysis
This document provides a method for determining the amount of trihydrate alumina (THA) in bauxite. The method involves digesting a bauxite sample in a bomb digester using sodium hydroxide solution at 145°C. The solution is then filtered, aliquoted, and titrated with a zinc sulfate solution using xylenol orange indicator. The volume of zinc sulfate used in the second titration, after adding ammonium fluoride, is then used to calculate the percentage of THA in the original bauxite sample. Reagents and equipment needed include balances, glassware, a bomb digester, indicators, digestion and buffer solutions, EDTA, and zinc sulfate.
Research capstone assignment
This document summarizes the progress made in synthesizing metal complexes to model the active site of the nickel-containing enzyme Ni-ARD. The synthesis involves creating ligands based on diamines and protecting/deprotecting groups. Zinc analogs will be made first for method development before synthesizing nickel complexes. So far, multi-step syntheses have yielded protected and deprotected ligands, with one ligand ready for metal coordination. Further work is needed to complete the targeted family of zinc and nickel complexes to study structure-function relationships at the Ni-ARD active site.
Effect of position of substituents on the exhaustion and thermodynamic parame...
This document discusses the effect of substituents on the properties of six monoazo acid and disperse dyes synthesized. It describes the diazotization and coupling reactions used to synthesize the dyes. Absorption properties including wavelength and molar extinction coefficient are reported. Thermodynamic parameters like standard affinity, heat of dyeing, and entropy of dyeing are determined for the dyes on nylon fabrics. Results show the acid dyes have higher exhaustion and thermodynamic values than the disperse dyes due to stronger dye-fiber interactions. Substituents like nitro groups cause bathochromic shifts while hindering planarity causes hypsochromic shifts in absorption wavelength. Standard affinity correlates positively with exhaustion percentage.
method for crude protein anylsis (Kjeldahl).pptx
This method was specifically developed by Danish
chemist, Johan G.C.T. Kjeldahl, in 1883 to determine
the nitrogen contents in organic and inorganic
substances (like foodstuffs, fertilizers, wastewater,
soil, feed, grain, and other substances).
⦿ This method is also used for estimating the crude
protein content in food.
N boc-3-pyrrolidinone
Product Usage
1-tert-butoxycarbonyl-3-pyrrolidone is a starting material and a useful intermediate in organic synthesis.
suzuki shy
1) Phenylboronic acid, sodium carbonate, 4-bromobenzoic acid, and palladium on carbon were mixed in a flask with water and refluxed for 30-40 minutes to perform a Suzuki coupling reaction.
2) After cooling, hydrochloric acid was added to precipitate the crude product, which was isolated by vacuum filtration.
3) The crude product was purified by recrystallization from a methanol/water solution, yielding the final product which was isolated by vacuum filtration and dried. The yield was 30% and the melting point was 219-220°C.
Presentation
This document describes an experiment to synthesize benzaldehyde through the catalytic oxidation of benzyl alcohol using manganese oxide.
Potassium permanganate, sulfuric acid, and ferrocene were used to synthesize manganese (IV) oxide, which was then tested through x-ray diffraction and found to be in an amorphous phase.
Benzyl alcohol, toluene, and the synthesized manganese oxide were heated in a round bottom flask with a condenser. Gas chromatography analysis found peaks indicating the presence of benzaldehyde, showing the reaction was successful in synthesizing the desired product. Further tests found the amorphous phase manganese oxide performed with higher conversion than the gamma phase.
New benzotriozole phthalocyanine nickel(ii) photostabilizer for low density p...
This document summarizes the synthesis and characterization of a new benzotriazole phthalocyanine nickel(II) complex to be used as a photostabilizer for low density polyethylene. The complex was prepared and characterized using elemental analysis and FT-IR spectroscopy. Experimental investigation showed that this complex acts as an excellent photostabilizer for LDPE, providing stabilization through multiple pathways, unlike commercial antioxidants which typically offer only single mechanisms of protection. Testing revealed that the complex performed better than LDPE samples containing other common antioxidants at preventing degradation when exposed to UV light over time. Therefore, the complex is a promising new photostabilizer for improving the UV resistance of LDPE.
Visible light assisted photocatalytic reduction of CO2 using a graphene oxide...
A new heteroleptic ruthenium complex containing 2-thiophenyl benzimidazole ligands was synthesized using a microwave technique and was immobilized to graphene oxide via covalent attachment. The synthesized catalyst was used for the photoreduction of carbon dioxide under visible light irradiation without using a sacrificial agent, which gave 2050 μmol g−1 cat methanol after 24 h of irradiation
84 014-oc-walkley-black
This document describes a modified Walkley-Black method for determining organic carbon content in soils. The method involves oxidizing organic carbon in a soil sample using potassium dichromate in sulfuric acid. Excess dichromate is then titrated with ferrous sulfate. Calculations are made to determine the percentage of organic carbon in the original soil sample based on the amount of dichromate reduced. The document provides details on reagents, equipment, procedures, calculations, and references for the wet oxidation method to approximate organic carbon content in soils for some applications.
Photo-Oxygenated Derivatives from Eugenol
Photo-oxygenation reaction was performed on eugenol (1) (2- methoxy-4-(2'-propenyl) phenol) in chloroform as a solvent and tetraphenyl porphrine (TPP) as singlet oxygen sensitizer. Irradiation of the reaction mixture was carried out by sodium lamp at -20 °C for six hrs., during which dry oxygen was allowed to pass through the reaction mixture. Two hydroperoxides (3) and (4) were formed. Eugenol methyl ether (2) was also photo-oxygenated under the same conditions of eugenol, where only the side chain was photo-oxygenated at position C-1' to give product (5). In addition to the epoxide derivative of eugenol methyl ester (8) was prepared and its reaction with aminoantipyrine was carried out to give product (9). Product (8) could be considered as a DNA- alkylating agent.
Photo-Oxygenated Derivatives from Eugenol
Photo-oxygenation reaction was performed on eugenol (1) (2- methoxy-4-(2'-propenyl) phenol) in
chloroform as a solvent and tetraphenyl porphrine (TPP) as singlet oxygen sensitizer. Irradiation of the reaction
mixture was carried out by sodium lamp at -20 °C for six hrs., during which dry oxygen was allowed to pass
through the reaction mixture. Two hydroperoxides (3) and (4) were formed. Eugenol methyl ether (2) was also
photo-oxygenated under the same conditions of eugenol, where only the side chain was photo-oxygenated at
position C-1' to give product (5). In addition to the epoxide derivative of eugenol methyl ester (8) was prepared
and its reaction with aminoantipyrine was carried out to give product (9). Product (8) could be considered as a
DNA- alkylating agent
некоторые о синтезе нанокомпозита на основе эпоксидки
The document describes three methods for preparing nanocomposites. The first method involves dissolving epoxy resin in acetone, adding nano-CaCO3 and dispersing it using mechanical stirring and ultrasonication. The solvent is then removed by heating and applying vacuum. The second method mixes epoxy resin with clay nanoparticles using mechanical mixing and ultrasonication. A curing agent is added and the mixture is cured. The third method uses a sol-gel process to mix epoxy resins, a toughening agent, hardener, and SiO2 nanoparticles. The components are mixed, ultrasonicated, degassed under vacuum, poured into a mold and cured at high temperature.
Thermochromic hydrogel
A surfactant free thermo-chromic hydrogel is a "Smart Hydrogel" which changes its color according to the surrounding acidity or basicity. The material used for the synthesis of the hydrogel is PVA-Borax gel network, and the pH sensitive dyes like phenolphthalein, Bromothymol Blue etc. are responsible for the color change behavior.
Non aq titrations unit 2
Non-aqueous titration has several advantages over aqueous titration:
1. Organic acids and bases insoluble in water can be soluble in non-aqueous solvents allowing them to be titrated.
2. A non-aqueous solvent may help separate two or more acids in a mixture so they can be titrated individually.
3. More substances can be titrated as the solubility and application ranges are enlarged for weak acids/bases that cannot be titrated in water.
Some common non-aqueous solvents used include acetic acid, acetonitrile, alcohols, DMF. Indicators suitable for specific titrations must be selected to indicate the endpoint
Synthesis of new chelating ion exchange resins derived from guaran and diviny...
New chelating ion exchange resin containing hydroximate of 5 amino salicylic acid was synthesized by incorporating it in divinylbenzene styrene (DVBS) copolymer. Hydrophilic polysaccharidematrix ofguaran was also used to incorporate hydroximate of 5 amino salicylic acid in it. The resin characteristics were studied by determining its bulk density, specific bulk volume, moisture content, degree of substitution and ion exchange capacity. The resin was characterized by means of IR spectra, Nitrogen content and pH titration. The distribution coefficient values of different metal ions namely Fe(II), Cu(II) , Zn(II) , Cd(II) , Co(II) , Ni(II), Ca(II), U(VI), Cr(VI) & W(VI) was carried out on these resins as a function of pH . Metal analysis was done by Atomic Absorption Spectrophotometer. The hydroximate derivative of guaran is found to be more selective than that of diving benzene co-polymer.
Lowry's method
This document outlines Lowry's method for determining the total protein content in a wheat flour sample. The method involves forming a complex between amino acids and copper sulfate in an alkaline solution, which is then reduced by phosphomolybdic and phosphotungstic acids to produce a blue color. The intensity of this color can be measured spectrophotometrically and is proportional to the protein content. The document details the reagents, sample preparation by precipitation and washing, using a BSA standard curve to quantify the unknown protein content in the wheat flour sample.
Similar to 2.1. Synthesis of unzipped graphene oxide1. MWCNTs with outer.docx (20)
Synthesis,characterization,thermal and kinetic photo chemical decomposition s...
Synthesis,characterization,thermal and kinetic photo chemical decomposition s...
Effect of position of substituents on the exhaustion and thermodynamic parame...
Effect of position of substituents on the exhaustion and thermodynamic parame...
New benzotriozole phthalocyanine nickel(ii) photostabilizer for low density p...
New benzotriozole phthalocyanine nickel(ii) photostabilizer for low density p...
Visible light assisted photocatalytic reduction of CO2 using a graphene oxide...
Visible light assisted photocatalytic reduction of CO2 using a graphene oxide...
некоторые о синтезе нанокомпозита на основе эпоксидки
некоторые о синтезе нанокомпозита на основе эпоксидки
Synthesis of new chelating ion exchange resins derived from guaran and diviny...
Synthesis of new chelating ion exchange resins derived from guaran and diviny...
More from felicidaddinwoodie
Business UseWeek 1 Assignment #1Instructions1. Plea.docx
Business Use
Week 1: Assignment #1
Instructions
1. Please read these two articles:
· Using forensics against a fitbit device to solve a murder: https://www.cbsnews.com/news/the-fitbit-alibi-21st-century-technology-used-to-help-solve-wisconsin-moms-murder/
· How Amazon Echo could be forensically analyzed! https://www.theverge.com/2017/1/6/14189384/amazon-echo-murder-evidence-surveillance-data
2. Then go around in your residence / dwelling (home, apartment, condo, etc) and be creative.
3. Identify at least five appliances or devices that you THINK could be forensically analyzed and then identify how this might be useful in an investigation. Note - do not count your computer or mobile device. Those are obvious!
4. I expect at least one paragraph answer for each device.
Why did I assign this?
The goal is to have you start THINKING about how any device, that is capable of holding electronic data (and transmitting to the Internet) could be useful in a particular investigation!
Due Date
This is due by Sunday, May 10th at 11:59PM
Surname 6
Informative speech on George Stinney Jr.
A. Info research analysis
The general purpose of the speech was to inform people about the civil injustice being done against the African American community in the United States. The specific purpose of the speech was to portray to the audience how an innocent 14-year old black boy suffered in the hands of the South Carolina State law enforcing officers. He was falsely accused of killing two white girls and electrocuted within two months after conviction.
I decided the topic of my speech after perusing through all the suggested topics ad found that the story of George Stinney Jr. was touching and emotional entirely.
This topic benefits the audience and the society in general by giving them an insight of the cruelty that the American law system has against the African American community. The audience gets to know how the shady investigations were done with claims that George had pleaded guilty to the charges of murder when there was no real evidence tying him to the crime or a signed plea agreement.
The alternative view that I found in the research was the version of the investigating officer of the case who claimed that the 14-year old boy managed to kill two girls aged 11 and 7 with a blunt object and ditch them in a nearby trench. This alternative point of view did not make sense because it is hard for a 14-year old boy to use the force that was reported by postmortem results to kill the girls. Therefore, I knew everything was a lie and I had to take the point of view of George’s innocence.
B. informative outline
Introduction:
George Stinney Jr. was an African American boy born on October 21, 1929 in Pinewood, South Carolina, U.S. He is considered as the youngest person to be executed by the United State government in 20th century.
Main body
Investigations of the alleged crimes (Bickford, 05)
The investigations concerning the alleged crimes of George S.
Business UsePALADIN ASSIGNMENT ScenarioYou are give.docx
Business Use
PALADIN ASSIGNMENT
Scenario:
You are given a PC and you are faced with this scenario: you don’t know the password to the PC which means you can’t login so you can use a forensic tool like FTK IMAGER to capture the hard drive as a bit-for-bit forensic image AND/OR
1. The hard drive is either soldiered onto the motherboard (there are some new hard drives like this!) or cannot be removed because the screws are stripped (this has happened to me);
2. Even if you figured out the password or got an admin password the PC may have its USB ports blocked via a GPO policy (this is very common in corporations now);
3. Even if you can get the GPO policy overridden you may have some concerns about putting it on the network (which is true especially if you are dealing with malware).
So what you can you do? The best solution is to boot the PC up into forensically sound environment that lets you bypass the password aspect; GPO policy; etc and take a bit-for-bit image. One software that has done the job very well for me is Paladin.
How to get points
If you can send me a screenshot showing me that you had installed Paladin .ISO and made your USB device a bootable device with Paladin using Rufus then you get 10 points.
If you can send me a screenshot showing that you had a chance to boot your computer into Paladin then you will earn an extra 10 points. It is not necessary for you to take a forensic image of your PC but I have included generic instructions here.
Assumptions:
1. You have downloaded Rufus on your computer
2. You have downloaded Paladin on your computer.
Instructions:
1. Make sure you have at least one USB drive.
2. If not down already, download Rufus from https://rufus.ie/.
3. If not done already, download the Paladin ISO image from this website: https://sumuri.com/product/paladin-64-bit-version-7/ which is free. It’s suggested price is $25.00 but you can adjust the price to $0 then order. To be clear – do not pay anything.
4. Insert the USB device in your computer.
5. Run Rufus where you install the Paladin .ISO file on the USB device and make it bootable. Now I could provide you step by step instructions, but this is a Masters class so I want you to explore a bit and figure this out. One good video is this: https://www.youtube.com/watch?v=V6JehM0WDTI.
6. After you are done using Rufus where you have installed Paladin.ISO on the USB device and made it bootable then make sure the USB device is in the PC.
7. Restart your PC. Press F9(HP) laptop) or F12 (Dell laptop) so you can be taken into the BIOS bootup menu.
8. This is where things get a bit tricky e.g. your compute may be configured differently where you have to adjust your BIOS settings. If you do not feel comfortable doing this then stop here. I do not want you to mess up your computer. You have already earned ten extra points!
9. If you still proceed then you will see a list of bootable devices. You may, for example, see a list of devices. Pick the device .
Business UsePractical Connection WorkThis work is a writte.docx
Business Use
Practical Connection Work
This work is a written assignment where students will demonstrate how this course research has connected and been put into practice within their own career.
Assignment:
Provide a reflection of at least 500 words of how the knowledge, skills, or theories of this course, to date, have been applied, or could be applied, in a practical manner to your current work environment.
If you are not currently working, then this is where you can be creative and identify how you THINK this could be applied to an employment opportunity in your field of study.
Requirements:
Provide a 500 word minimum reflection.
Use of proper APA formatting and citations. If supporting evidence from outside resources is used those must be properly cited.
Share a personal connection that identifies specific knowledge and theories from this course.
You should NOT provide an overview of the assignments given in the course. Reflect and write about how the knowledge and skills obtained through meeting course objectives were applied or could be applied in the workplace.
// Pediatric depressionTherapy for Pediatric Clients with Mood Disorders
An African American Child Suffering From Depression
BACKGROUND INFORMATION
The client is an 8-year-old African American male who arrives at the ER with his mother. He is exhibiting signs of depression.
Client complained of feeling “sad” Mother reports that teacher said child is withdrawn from peers in class Mother notes decreased appetite and occasional periods of irritation Client reached all developmental landmarks at appropriate ages Physical exam unremarkable Laboratory studies WNL Child referred to psychiatry for evaluation Client seen by Psychiatric Nurse Practitioner
MENTAL STATUS EXAM
Alert & oriented X 3, speech clear, coherent, goal directed, spontaneous. Self-reported mood is “sad”. Affect somewhat blunted, but child smiled appropriately at various points throughout the clinical interview. He denies visual or auditory hallucinations. No delusional or paranoid thought processes noted. Judgment and insight appear to be age-appropriate. He is not endorsing active suicidal ideation, but does admit that he often thinks about himself being dead and what it would be like to be dead.
The PMHNP administers the Children's Depression Rating Scale, obtaining a score of 30 (indicating significant depression)
RESOURCES
§ Poznanski, E., & Mokros, H. (1996). Child Depression Rating Scale--Revised. Los Angeles, CA: Western Psychological Services.
Decision Point OneSelect what the PMHNP should do:Begin Zoloft 25 mg orally daily
Begin Paxil 10 mg orally daily
Begin Wellbutrin 75 mg orally BID
.
Business System AnalystSUMMARY· Cognos Business.docx
Business System Analyst
SUMMARY:
· Cognos Business In experience intelligence with expertise in Software Design, Development, and Analysis, Teradata, Testing, Data Warehouse and Business Intelligence tools.
· Expertise in Cognos 11/10.2, 10.1, 8.x (Query Studio, Report Studio, Analysis Studio, Business Insight/Workspace, Business Insight/Workspace Advanced, Metric Studio (Score carding), Framework Manager, Cognos Connection)
· Expertise in Installation and Configuration of Cognos BI Products in Distributed environment on Windows
· Expertise with Framework Manager Modeling (Physical Layer, Business Layer, Packages) and Complex Report building with Report Studio.
· Expertise developing complex reports using drill-through reports, prompts, dashboards, master-detail, burst-reports, dynamic filtering in Cognos.
· Expertise in creating Dashboard reports using Java Script in Report studio.
· Expertise in building scorecard reports and dashboard reports using metric studio.
· Expertise with Transformer models and cubes that were used in Power play analysis and also these cubes were used in various Analysis Studio reports.
· Expertise with MDX Functions in Report Studio using Multi-dimensional Sources.
· Expertise with Cognos security (LDAP, Active Directory, Access manager, object level security, data security).
· Expertise with Tabbed Inter-phases and with Interactive Behavior of value based chart highlighting.
· Sound Skills in developing SQL Scripts, PL/SQL Stored Procedures, functions, packages.
· Expertise on production support and troubleshoot/test issues with existing reports and cubes.
· Experienced with MS SQL Server BI Tools like SSIS, SSRS and SSAS.
· Expertise in creation of packages, Data and Control tasks, Reports and Cubes using MS SQL Server BI Tools.
· Ability to translate business requirements into technical specifications and interact with end users to gather requirements for reporting.
· Good understanding of business process in Financial, Insurance and Healthcare areas.
· Expertise in infrastructure design for the cognos environment and security setup for different groups as per business requirement.
· Creating training material on all the Ad-Hoc training
· Expertise in all the basic administrative tasks like deployments, routing rule setup’s , user group setup , folder level securities etc.
· Have deployment knowledge of IBM Cognos report in Application servers like WAS.
· Have knowledge on handling securities and administration functionalities on IBM Cognos 10.x
· Good work ethics, detail oriented, fast learner, team oriented, flexible and adaptable to all kinds of stressful environments. Possess excellent communication and interpersonal skills.
Technical Skills:
BI Platform
Cognos 11,10.2, 10.1, 8.x (Query Studio, Report Studio, Analysis Studio, Business Insight/Workspace, Business Insight/Workspace Advanced, Metric Studio (Score carding), Framework Manager, Cognos Connection)
Data Base
MS Access, MS SQL Server, Orac.
Business StrategyOrganizations have to develop an international .docx
Business Strategy
Organizations have to develop an international Human Resources Management Strategy, when they expand globally. Which do you think is more critical for international Human Resource Management:
Understanding the cultural environment, or
Understanding the political and legal environment?
Please choose 1 position and give a rationale; examples are also a way to demonstrate your understanding of the learning concepts.
.
Business StrategyGroup BCase Study- KFC Business Analysis.docx
Business Strategy
Group B
Case Study- KFC Business Analysis
Abstract
Introduced in 1952 by Colonel Sanders
Second largest restaurant chain today in terms of popularity
Annual revenue of $23 billion
Diversified its menu to suit cultural needs of people across different countries
Hindering factors in KFC’s growth are growing consumer health consciousness, animal welfare criticism, environmental criticism
Introduction
KFC was born in 1952 and its founder was Colonel Sanders
First franchise to grow globally over international market
By the 1960s – 1980s the market was booming in countries like England, Mexico, China
Management and ownership transferred over the years to Heublin, Yum Brands and PepsiCo.
Annual revenue of $23 billion in 2013
KFC had expanded its menu to suit cultural needs of people across different countries
Hindering factors in KFC’s growth are growing consumer health consciousness, animal welfare criticism, environmental criticism, logistic management issue in UK, cultural differences in Asian countries towards accepting the fried chicken menu.
Factors contributing to KFC’s global success
The core reason for KFCs success is it’s mandate to follow strict franchise protocols that have continuously satisfied customers demands:
The quality of the chicken cooked in KFC has certain specific guidelines
The size of the restaurant should be 24x60 feet.
The restaurant washrooms and ktichen has certain cleanliness standards
Food that is not sold off needs to be trashed
The workers need to have a specific clothing and uniform.
A certain % of the gross earnings should be used for advertisement and R&D
Air conditioning is mandatory in the outlets
Global number of KFC restaurants in the past decade
Importance of cultural factors to KFC’s sales success in India and China
Culture is the collective programming of the human mind that distinguishes the members of one human group from those of another. Culture in this sense is a system of collectively held values
“Culture is everything that people have, think, and do as members of their society”, which demonstrating that culture is made up of (1) material objects; (2) ideas, values, attitudes and beliefs; and (3) specified, or expected behavior.
Many scholars have theorized and studied the notion of cross-cultural adaptation, which tends to move from one culture to another one, by learning the elements such as rules, norms, customs, and language of the new culture (Oberg 1960, Keefe and Padilla 1987, Kealey 1989). According to Ady (1995),
“Cultural adaptation is the evolutionary process by which an individual modifies his personal habits and customs to fit into a particular culture. It can also refer to gradual changes within a culture or society that occur as people from different backgrounds participating in the culture and sharing their perspectives and practices.”
Cultural factors in India that go against KFC’s original recipe.
.
Business Strategy Differentiation, Cost Leadership, a.docx
This document discusses various concepts related to business strategy and competitive advantage. It begins by defining a business-level strategy and outlining the "who, what, why, and how" of competing for advantage. It then discusses how industry and firm effects jointly determine competitive advantage. Key ideas around generating and sustaining advantage through barriers to imitation are presented. The document also discusses concepts like differentiation advantage, cost leadership, learning curves, economies of scale, value chains, and the resource-based view of the firm. Strategic coherence and dynamic strategic activity systems are defined.
Business Research Methods, 11e, CooperSchindler1case.docx
Business Research Methods, 11e, Cooper/Schindler
1
>cases
NCR Country Club started out as a benefit for thousands of National Cash Register employ-
ees. By the late 1990s, those employees were aging rapidly and the core membership needed
to be increased. NCRCC offers two golf courses. One is an award winning, championship-
hosting course on the PGA tour. But it wasn’t attracting new members, especially younger
families. This case is about a membership study done as part of a larger management
initiative to evaluate several strategic directions the club might take to expand its member-
ship. www.ncrcountryclub.com
>Abstract
>The Scenario
NCR Country Club (NCRCC) started in 1954 as an employee benefit of the National
Cash Register Co. but is now an open-membership club. This country club located
in Kettering, Ohio (near Dayton), hosts two 18-hole golf courses. The NCR South
course, a par 71 championship course of 6,824 yards of heavily wooded rolling
countryside, the site of the 1996 PGA Championship, the 1986 U.S. Open, and the
1998 U.S. Mid-Amateur, is consistently ranked by Golf Digest as one of the top
100 courses in the United States. The prairie-links style of the North course, a
6,358-yard par 70 course, is considered challenging. In southwestern Ohio, the
active golf season usually lasts from May through October. Within a 30-minute radius
of NCRCC, the avid golfer will find eight other private golf and country clubs as well
as 29 public golf clubs and courses.
In 1997, after the purchase of NCR Corporation by AT&T, AT&T provided
a $4.0 million interest-free loan to raze the original clapboard-sided clubhouse and
replace it with an all-brick colonial-style facility. Boasting both formal and informal,
inside and outside eating facilities as well as banquet and party rooms, the members
voted that the new clubhouse would be totally smoke-free. The rich cherrywood
paneling and the hunter green and burgundy décor mellow the high-ceiling, interior
spaces. Golf memberships are $20,000 with social (nongolf) memberships at $1,000
each. NCR employees did not and do not pay membership fees to join. Additionally,
each member must spend $150 per quarter in dining receipts and pay $225 (golf) or
$160 (social) in annual dues.
Needing to attract new members to support the renovated facility after AT&T
divested itself of NCR and given the growing age of its members, NCRCC
implemented an aggressive membership campaign in 1998. The goal was to bring
golf memberships to 680 and attract as many social memberships as possible. After
only moderate success, NCRCC commissioned McMahon Group to assist with
strategic planning.
NCRCC: Teeing Up a
New Strategic Direction
Used with permission of
Pamela S. Schindler
©2001.
Business Research Methods, 11e, Cooper/Schindler
2
McMahon Group specializes in providing research and strategic consulting to golf
clubs and full-service golfing facilities. “Golf club membership within the United States
is perceive.
Business RequirementsReference number Document Control.docx
Business Requirements
Reference number:
Document Control
Change Record
Date
Author
Version
Change Reference
Reviewers
Name
Position
Table of Contents
2Document Control
1
Business Requirements
4
1.1
Project Overview
4
1.2
Background including current process
4
1.3
Scope
4
1.3.1
Scope of Project
4
1.3.2
Constraints and Assumptions
5
1.3.3
Risks
5
1.3.4
Scope Control
5
1.3.5
Relationship to Other Systems/Projects
5
1.3.6
Definition of Terms (if applicable)
5
1 Business Requirements
1.1 Project Overview
Provide a short, yet complete, overview of the project.
1.2 Background including current process
Describe the background to the project, (same section may be reused in the Quality Plan) include:
This project is
The project goal is to
The IT role for this project is
1.3 Scope
1.3.1 Scope of Project
The scope of this project includes a number of areas. For each area, there should be a corresponding strategy for incorporating these areas into the overall project.
Applications
In order to meet the target production date, only these applications will be implemented:
Sites
These sites are considered part of the implementation:
Process Re-engineering
Re-engineering will
Customization
Customizations will be limited to
Interfaces
the interfaces included are:
Architecture
Application and Technical Architecture will
Conversion
Only the following data and volume will be considered for conversion:
Testing
Testing will include only
Funding
Project funding is limited to
Training
Training will be
Education
Education will include
1.3.2 Constraints and Assumptions
The following constraints have been identified:
The following assumptions have been made in defining the scope, objectives and approach:
1.3.3 Risks
The following risks have been identified as possibly affecting the project during its progression:
1.3.4 Scope Control
The control of changes to the scope identified in this document will be managed through the Change Control, with business owner representative approval for any changes that affect cost or timeline for the project.
1.3.5 Relationship to Other Systems/Projects
It is the responsibility of the business unit to inform IT of other business initiatives that may impact the project. The following are known business initiatives:
1.3.6 Definition of Terms (if applicable)
List any definitions that will be used throughout the duration of the project.
5
A working structure is the fundamental programming that bargains with all the mechanical social affair and other programming on a PC. It other than pulls in us to visit with the PC without perceiving how to talk the piece PC programs language's. A working structure is inside theory of programming on a contraption that keeps everything together. Working systems visit with the's contraption. They handle everything from your solace and mice to the Wi-Fi radio, gathering contraptions, and show. Symbolically, a worki.
Business ProposalThe Business Proposal is the major writing .docx
Business Proposal
The Business Proposal is the major writing assignment in the course. You are to create and submit a formal proposal that suggests how to change something within an organization. This organization can be large or small, a place of employment now or in the past, or an organization to which the students belong. From past experiences, it is best to use a business with fewer than 200 employees, and one with which you have personal experience. It could be a place where you currently work or a place you have worked or volunteered in the past.
The change can be specific to a unit or can apply to the whole organization; it can relate to how important information is distributed, who has access to important information, how information is accessed, or any other change in practices the students see as having a benefit. The proposal should be directed to the person or committee with the power to authorize the change. However, if you are working within a large organization, and asking for a small organizational change, communicating with a CEO or president may not make the most sense. You need to think about who within the organization might be the best person for the type of change suggested.
For the submission, you are to follow the guidelines for formal proposals available in Chapter 10 of the text. You can review 10.1, 10.4, and 10.19 for more information about specific components for a well-written formal business proposal. A complete proposal must have all required sections of a formal report excluding the copy of an RFP and the Authorization. The final draft of the proposal should be 1500–2000 words, and include the following necessary formal proposal components:
Letter of transmittal
Executive summary
Title page
Table of contents
List of illustrations
Introduction
Background: Purpose/problem
Proposal: plan, schedule, details
Staffing
Budget
Appendix
Formatting does matter for this assignment, and you are to check the text for details about how to format and draft the different proposal segments. Proposals don't just have text; graphics and charts are necessary, too. In addition, research is important, and footnotes and references must be included. All content should be concise, clear, and detailed. The proposal should be well-written with appropriate grammar, spelling, and punctuation.
This is a scaffolded writing project that consists of four assignments.
.
Business ProjectProject Progress Evaluation Feedback Form .docx
Business Project
Project Progress Evaluation
Feedback Form Week 3
Date:
__________________________________________________
Student Name:
__________________________________________________
__________________________________________________
Project Title: Effect Of Increasing Training Budget
Project Type: Business Research
Researchers:
Has a topic been chosen and a problem statement created?
Yes { } NO { }
Was the problem statement submitted in a 1-4 page paper that includes an introduction to the topic with appropriate documentation?
Yes { } No { }
Specifically, if any, needs additional content or rewriting to create more clarity? What specific recommendations do you have to help in this process?
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
What is your workable timetable that states specific objectives and target completion dates for completing the final draft of the plan? Write the timetable below:
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
________________________________________________________________________
Feedback Form #3 – Project Proposal and Plan
▼
THE UK’S LEADING PROVIDER OF EXPERT SERVICES FOR IT PROFESSIONALS
NATIONAL COMPUTING CENTRE
IT Governance
Developing a successful governance strategy
A Best Practice guide for decision makers in IT
IT Governance
Developing a successful governance strategy
A Best Practice guide for decision makers in IT
The effective use of information technology is now an accepted organisational imperative - for
all businesses, across all sectors - and the primary motivation; improved communications and
commercial effectiveness. The swift pace of change in these technologies has consigned many
established best practice approaches to the past. Today's IT decision makers and business
managers face uncertainty - characterised by a lack of relevant, practical, advice and standards
to guide them through this new business revolution.
Recognising the lack of available best practice guidance, the National Computing Centre has
created the Best Practice Series to capture and define best practice across the key aspects of
successful business.
Other Titles in the NCC Best Practice series:
IT Skills - Recruitment and Retention ISBN 0-85012-867-6
The New UK Data Protection Law ISBN 0-85012-868-4
Open Source - the UK opportunity ISBN 0-85012-874-9
Intellectual Property Rights - protecting your intellectual assets ISBN 0-85012-872-2
Aligning IT with Business Strategy ISBN 0-85012-889-7
Enterprise Architecture - underst.
BUSINESS PROCESSES IN THE FUNCTION OF COST MANAGEMENT IN H.docx
BUSINESS PROCESSES IN THE FUNCTION OF COST
MANAGEMENT IN HEALTHCARE INSTITUTIONS
1
1
st
IVANA DRAŽIĆ LUTILSKY
Departement of Accounting
Faculty of Economics and Business
University of Zagreb
Croatia
[email protected]
2
nd
LUCIJA JUROŠ
Faculty of Economics and Business
[email protected]
Abstract: This paper is dealing with the importance of business processes regarding costs
tracking and cost management in healthcare institutions. Various changes within the health
care system and funding of hospitals require the introduction of management information
systems and cost accounting. The introduction of cost accounting in public hospitals would
allow the planning and control of costs, monitoring of costs per patient or service and the
calculation of indicators for the analysis and assessment of the economic performance of the
business of public hospitals and lead to the transparency of budget spending. A model that
would be suited to the introduction in the public hospital is full cost allocation model based on
activities or processes that occur, known as the ABC method. Given that this is a calculation
of cost of services provided through various internal business processes, it is important to
identify all business processes in order to be able to calculate the costs incurred by services.
Although the hospital does not do business with the aim to make a profit, they must follow all
the costs (direct and indirect) to be able to calculate the full costs i.e. the price of the service
provided. In addition, the long-term sustainability of business activities in terms of funding
difficulties and the continuous growth of cost of services provided, hospitals must control and
reduce the cost of the program and specific activities. Therefore, the objective of this paper is
to point out the importance of business processes while introducing ABC method.
Keywords: Business Processes, Cost management, ABC method, Healthcare Institutions
1
This work has been fully supported by University of Zagreb funding the project “Business processes in the
implementation of cost management in healthcare system”, Any opinions, findings, and conclusions or
recommendations expressed in this paper are those of the authors and do not necessarily reflect the views of
University of Zagreb.
mailto:[email protected]
1 Introduction
In recent years, the efficiency of the management in health care services and the system of
quality in health care institutions significantly increased. Patients expect more from
healthcare providers and higher standards of care. At the same time, those who pay for
health services are increasingly concerned about the rising costs of health care services, but
also the potential ineffectiveness of the health care system. Consequently, there is a broad
interest in understanding the ways of efficient work of health care management and .
Business Process Management JournalBusiness process manageme.docx
Business Process Management Journal
Business process management: a maturity assessment of Saudi Arabian
organizations
Omar AlShathry,
Article information:
To cite this document:
Omar AlShathry, (2016) "Business process management: a maturity assessment of Saudi Arabian
organizations", Business Process Management Journal, Vol. 22 Issue: 3, pp.507-521, https://
doi.org/10.1108/BPMJ-07-2015-0101
Permanent link to this document:
https://doi.org/10.1108/BPMJ-07-2015-0101
Downloaded on: 04 September 2018, At: 00:11 (PT)
References: this document contains references to 26 other documents.
To copy this document: [email protected]
The fulltext of this document has been downloaded 1083 times since 2016*
Users who downloaded this article also downloaded:
(2016),"Process improvement for professionalizing non-profit organizations: BPM approach",
Business Process Management Journal, Vol. 22 Iss 3 pp. 634-658 <a href="https://doi.org/10.1108/
BPMJ-08-2015-0114">https://doi.org/10.1108/BPMJ-08-2015-0114</a>
(2016),"Ownership relevance in aspect-oriented business process models", Business
Process Management Journal, Vol. 22 Iss 3 pp. 566-593 <a href="https://doi.org/10.1108/
BPMJ-01-2015-0006">https://doi.org/10.1108/BPMJ-01-2015-0006</a>
Access to this document was granted through an Emerald subscription provided by emerald-
srm:586319 []
For Authors
If you would like to write for this, or any other Emerald publication, then please use our Emerald
for Authors service information about how to choose which publication to write for and submission
guidelines are available for all. Please visit www.emeraldinsight.com/authors for more information.
About Emerald www.emeraldinsight.com
Emerald is a global publisher linking research and practice to the benefit of society. The company
manages a portfolio of more than 290 journals and over 2,350 books and book series volumes, as
well as providing an extensive range of online products and additional customer resources and
services.
Emerald is both COUNTER 4 and TRANSFER compliant. The organization is a partner of the
Committee on Publication Ethics (COPE) and also works with Portico and the LOCKSS initiative for
digital archive preservation.
D
ow
nl
oa
de
d
by
S
A
U
D
I
D
IG
IT
A
L
L
IB
R
A
R
Y
(
S
D
L
)
A
t
00
:1
1
04
S
ep
te
m
be
r
20
18
(
P
T
)
https://doi.org/10.1108/BPMJ-07-2015-0101
https://doi.org/10.1108/BPMJ-07-2015-0101
https://doi.org/10.1108/BPMJ-07-2015-0101
*Related content and download information correct at time of download.
D
ow
nl
oa
de
d
by
S
A
U
D
I
D
IG
IT
A
L
L
IB
R
A
R
Y
(
S
D
L
)
A
t
00
:1
1
04
S
ep
te
m
be
r
20
18
(
P
T
)
Business process management:
a maturity assessment of Saudi
Arabian organizations
Omar AlShathry
Department of Information Systems,
Imam Mohammed Bin Saud University, Riyadh, Saudi Arabia
Abstract
Purpose – Business Process Management (BPM) has become increasingly common among organizations
in d.
Business Process DiagramACCESS for ELL.docx
Business Process Diagram
ACCESS for ELLs®
Listening, Reading,
Writing, and Speaking
Sample Items
2008
WORLD-CLASS INSTRUCTIONAL DESIGN AND ASSESSMENT
Grades 1–12
Copyright Notice
WIDA® ACCESS for ELLs® Sample Items - © 2008 Board of Regents of the University of Wisconsin System, on
behalf of the WIDA Consortium. The WIDA® ACCESS for ELLs® Sample Items are for personal, non-commercial
use only and shall not be copied, modified or redistributed without prior written authorization from WIDA. Fair use
of the WIDA® ACCESS for ELLs® Sample Items includes reproduction for classroom purposes (including copies for
parent distribution). Submit authorization requests or questions about this notice to the WIDA Consortium intellectual
property manager, Jim Lyne, at [email protected] or (608) 265-2262. WIDA and ACCESS for ELLs are registered
trademarks of the Board of Regents of the University of Wisconsin System.
Foreword: WIDA ACCESS for ELLs® Sample Items
The WIDA Consortium is pleased to provide this collection of sample
ACCESS for ELLs® test items for educators interested in a better understanding
of this English language proficiency assessment. While the security of test items
in actual use in WIDA assessments is a top priority, it is also extremely important
that educators have good, freely available sample items that provide a strong
sense for them, their students, parents, and the general public of what taking
the ACCESS for ELLs® English language proficiency assessment entails. In
addition, educators in university preparation programs can benefit from learning
more about ACCESS for ELLs® prior to their work within school settings. While
familiarity with the “look and feel” of the test is an important consideration,
teachers can also greatly benefit from seeing connections between ACCESS for
ELLs® test items and the WIDA English Language Proficiency Standards upon
which the items are directly based.
We want to encourage teachers to “teach to the standards, not to the test.”
More specifically, we want to promote the use of standards to guide students’
language learning rather than focusing instruction on preparing them for possible
test items. In seeing the close relationship between the standards and the test,
we believe that teachers can feel confident that by incorporating the standards
into classroom instruction and assessment, they will better prepare their students
for linguistic proficiency and in turn, provide access to academic success. Such
preparation will, over time, help boost the academic achievement of English
Language Learners, which should be reflected in future test scores.
Tim Boals, Ph.D.
Executive Director
WIDA Consortium
ACCESS for ELLs® Sample Items
Table of Contents
Introduction
I. Purpose of this Document � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 5
II. ACCESS for ELLs® Overview � � � � � � � �.
Business Plan[Your Name], OwnerPurdue GlobalBUSINESS PLANDate.docx
Business Plan[Your Name], Owner
Purdue Global
BUSINESS PLAN
Date
1. EXECUTIVE SUMMARY
1.1 Product
1.2 Customers
1.3 What Drives Us
2. COMPANY DESCRIPTION
2.1 Mission and Vision Statements
2.2 Principal Members at Startup (In Unit 7 you will expand on this section to include medium and long term personnel plans for all team members, including the line staff.)
2.2.1 Using chapter 10 of your text, write the plan, using the section in Chapter 10 that shows how to introduce each team member and describe their background and responsibilities. You will start with the leaders and managers, then discuss other employees as needed for your company to grow.
2.2.2 Use this spreadsheet to show the planning
Leaders/managers (unit 1)
When needed (number of months/years after opening)
Outside Services Needed
Key Functions
Add line staff (Unit 7)
2.3 Legal Structure
3. MARKET RESEARCH
3.1 Industry (from SBA, Business Guides by Industry, and Bureau of Labor Statistics)
3.1.1 Industry description
3.2.1 Resources used
3.2 Customers (from SBA site fill in worksheet, then use text for spreadsheets and follow-up explanations)
Add SBA part here:
Then, fill in spreadsheet using this example from the text:
Housewife:
Married Couple:
Age:
35–65
Age:
35–55
Income:
Fixed
Income:
Medium to high
Sex:
Female
Sex:
Male or Female
Family:
Children living at home
Family:
0 to 2 children
Geographic:
Suburban
Geographic:
Suburban
Occupation:
Housewife
Occupation:
Varies
Attitude:
Security minded
Attitude:
Security minded, energy conscious
Older Couple:
Elderly:
Age:
55–75
Age:
70+
Income:
High or fixed
Income:
Fixed
Sex:
Male or Female
Sex:
Male or Female
Family:
Empty nest
Family:
Empty nest
Geographic:
Suburban
Geographic:
Suburban
Occupation:
White-collar or retired
Occupation:
Retired
Attitude:
Security minded, energy conscious
Attitude:
Security minded, energy conscious
Explain who you are targeting and where they are located. Insert information here using these guidelines:
Information About Your Target Market – Narrow your target market to a manageable size. Many businesses make the mistake of trying to appeal to too many target markets. Research and include the following information about your market:
Distinguishing characteristics – What are the critical needs of your potential customers? Are those needs being met? What are the demographics of the group and where are they located? Are there any seasonal or cyclical purchasing trends that may impact your business?
Size of the primary target market – In addition to the size of your market, what data can you include about the annual purchases your market makes in your industry? What is the forecasted market growth for this group? For more information, see the market research guide for tips and free government resources that can help you build a market profile.
How much market share can you gain? – What is the market share.
Business PlanCover Page Name of Project, Contact Info, Da.docx
Business Plan
Cover Page
Name of Project, Contact Info, Date
Picture/graphics
Table of Contents
Executive Summary
The Company
The Project
The Industry
The Market
Distribution
Risk Factors
Financing
Sources
List of sources, specific articles, and websites
I WILL PROVIDE MORE INFORMATION IN CHAT TO COMPLETE PROPOSAL.
.
Business Planning and Program Planning A strategic plan.docx
This document discusses business planning and program planning. It explains that a strategic plan specifies how a program will achieve its objectives, while a business plan defines the path of a business and includes its organizational structure and financial projections. The document also discusses how the financial projection element of a business plan can impact a program's strategic planning process by influencing the program's budget. Finally, it notes that a program plan should include a funding request, as outlined in a business plan, to help secure necessary resources and facilitate achieving the program's goals and objectives.
Business Plan In your assigned journal, describe the entity you wil.docx
Business Plan: In your assigned journal, describe the entity you will utilize and explain your decision.
Must be:
At required length or longer
Written in American English at graduate level
Received on or before the deadline
Must pass turn it in
Written in APA with references
.
Business Plan Part IVPart IV of the Business PlanPart IV of .docx
Business Plan Part IV
Part IV of the Business Plan
Part IV of the business plan is due in week 7. Together with this part, you must show to your instructor that you have implemented the necessary corrections based on the part I feedback.
Part IV Requirements
1. Financials Plan
a. Present an in-depth narrative to demonstrate the viability of your business to justify the need for funding.
b. In this section describe financial estimates and rationale which include financial statements and forms that document the viability of your proposed business and its soundness as an investment.
c. Tables and figures must be introduced in the narrative.
i. Describe the form of business (sole-proprietor, LLC, or Corporation).
ii. Prepare three-year projections for income, expenses, and sources of funds.
iii. Base predictions on industry and historical trends.
iv. Make realistic assumptions.
v. Allow for funding changes at different stages of your company’s growth.
vi. Present a written rationale for your projections.
vii. Indicate your startup costs.
viii. Detail how startup funds will be used to advance your proposed business
ix. List current capital and any other sources of funding you may have
x. Document your calculations.
xi. Use reasonable estimates or actual data (where possible).
2. Continuous Improvement System
a. Present a brief summary of the continuous improvement processes that you will utilize for quality management (Six sigma, TQM, etc).
.
BUSINESS PLAN FORMAT Whether you plan to apply for a bu.docx
BUSINESS PLAN FORMAT
Whether you plan to apply for a business loan or not, you need to have a roadmap or plan to get you from where you are to the successful operation of your business. The pages that follow demonstrate the content of a simple business plan which has been found to be successful in obtaining startup funds from banks. You are encouraged to use all or whatever portions of this fit your business.
Please DO NOT write page after page of drivel or copy from someone else’s plan or one of those templates you can find on the Internet. In most cases this will not “sound" like you, nor will it be short and to the point. Those who read these things are busy people and will not be inclined to spend time reading irrelevant paperwork.
Throughout this sample, there are
italicized
comments which are meant to guide you in preparation. If you follow this format it is reasonable to expect a finished document with 15-20 pages plus the supporting documents in the last section.
If you have good quality pictures of your space, products or other items, you might include them as another way to convey just what you plan to do. A map of your location, diagram of floor space, or other illustration is also sometimes helpful. On the other hand, do not add materials simply to “bulk-up” the report.
While content is critical, it is also important to make this presentation look as good as possible. For this course, you will create the business plan in Word and submit the plan and all attachments through the Assignment drop box. That means all attachments have to be in digital form. For a bank loan or an investor, you would normally provide them with a print version. Print the pages in black ink on a high quality tinted letterhead paper. Color is not necessary but would add some interest in headlines, etc. Bind the document in a presentation folder or with a spiral binding. Don’t simply punch a staple in the upper left corner.
If your were going to pursue a bank loan or an investor, it would be normal to take this business plan to your SCORE counselor for a review and critique.
NOTE: Before you begin your inspection of the simple plan outline which follows, take a moment to review the Business Plan Checklist on the next page.
BUSINESS PLAN CHECKLIST
By way of review, here is a concise list of the basic requirements for a Business Plan, as recommended by the MIT Enterprise Forum:
·
Appropriate Arrangement
- prepare an executive summary, a table of contents and chapters in the right order.
·
Right Length
- make it not too long and not too short, not too fancy and not too plain.
·
Expectations
- give a sense of what founder(s) and the company expect to accomplish three to seven years in the future.
·
Benefits
- explain in quantitative and qualitative terms the benefit to the consumer of the products and services.
·
Marketability
- present hard evidence of the mar.
More from felicidaddinwoodie (20)
Business UseWeek 1 Assignment #1Instructions1. Plea.docx
Business UseWeek 1 Assignment #1Instructions1. Plea.docx
Business UsePALADIN ASSIGNMENT ScenarioYou are give.docx
Business UsePALADIN ASSIGNMENT ScenarioYou are give.docx
Business UsePractical Connection WorkThis work is a writte.docx
Business UsePractical Connection WorkThis work is a writte.docx
Business System AnalystSUMMARY· Cognos Business.docx
Business System AnalystSUMMARY· Cognos Business.docx
Business StrategyOrganizations have to develop an international .docx
Business StrategyOrganizations have to develop an international .docx
Business StrategyGroup BCase Study- KFC Business Analysis.docx
Business StrategyGroup BCase Study- KFC Business Analysis.docx
Business Strategy Differentiation, Cost Leadership, a.docx
Business Strategy Differentiation, Cost Leadership, a.docx
Business Research Methods, 11e, CooperSchindler1case.docx
Business Research Methods, 11e, CooperSchindler1case.docx
Business RequirementsReference number Document Control.docx
Business RequirementsReference number Document Control.docx
Business ProposalThe Business Proposal is the major writing .docx
Business ProposalThe Business Proposal is the major writing .docx
Business ProjectProject Progress Evaluation Feedback Form .docx
Business ProjectProject Progress Evaluation Feedback Form .docx
BUSINESS PROCESSES IN THE FUNCTION OF COST MANAGEMENT IN H.docx
BUSINESS PROCESSES IN THE FUNCTION OF COST MANAGEMENT IN H.docx
Business Process Management JournalBusiness process manageme.docx
Business Process Management JournalBusiness process manageme.docx
Business Plan[Your Name], OwnerPurdue GlobalBUSINESS PLANDate.docx
Business Plan[Your Name], OwnerPurdue GlobalBUSINESS PLANDate.docx
Business PlanCover Page Name of Project, Contact Info, Da.docx
Business PlanCover Page Name of Project, Contact Info, Da.docx
Business Planning and Program Planning A strategic plan.docx
Business Planning and Program Planning A strategic plan.docx
Business Plan In your assigned journal, describe the entity you wil.docx
Business Plan In your assigned journal, describe the entity you wil.docx
Business Plan Part IVPart IV of the Business PlanPart IV of .docx
Business Plan Part IVPart IV of the Business PlanPart IV of .docx
BUSINESS PLAN FORMAT Whether you plan to apply for a bu.docx
BUSINESS PLAN FORMAT Whether you plan to apply for a bu.docx
Recently uploaded
Hindi varnamala | hindi alphabet PPT.pdf
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptxMohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
BBR 2024 Summer Sessions Interview Training
Qualitative research interview training by Professor Katrina Pritchard and Dr Helen Williams
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama UniversityAkanksha trivedi rama nursing college kanpur.
Natural birth techniques are various type such as/ water birth , alexender method, hypnosis, bradley method, lamaze method etcThe simplified electron and muon model, Oscillating Spacetime: The Foundation...
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
How to Add Chatter in the odoo 17 ERP Module
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...Dr. Vinod Kumar Kanvaria
Exploiting Artificial Intelligence for Empowering Researchers and Faculty,
International FDP on Fundamentals of Research in Social Sciences
at Integral University, Lucknow, 06.06.2024
By Dr. Vinod Kumar KanvariaCommunity pharmacy- Social and preventive pharmacy UNIT 5
Covered community pharmacy topic of the subject Social and preventive pharmacy for Diploma and Bachelor of pharmacy
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...Nguyen Thanh Tu Collection
https://app.box.com/s/y977uz6bpd3af4qsebv7r9b7s21935vdThe History of Stoke Newington Street Names
Presented at the Stoke Newington Literary Festival on 9th June 2024
www.StokeNewingtonHistory.com
How to Manage Your Lost Opportunities in Odoo 17 CRM
Odoo 17 CRM allows us to track why we lose sales opportunities with "Lost Reasons." This helps analyze our sales process and identify areas for improvement. Here's how to configure lost reasons in Odoo 17 CRM
DRUGS AND ITS classification slide share
Any substance (other than food) that is used to prevent, diagnose, treat, or relieve symptoms of a
disease or abnormal condition
Recently uploaded (20)
Liberal Approach to the Study of Indian Politics.pdf
Liberal Approach to the Study of Indian Politics.pdf
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Chapter 4 - Islamic Financial Institutions in Malaysia.pptx
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
Natural birth techniques - Mrs.Akanksha Trivedi Rama University
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
The simplified electron and muon model, Oscillating Spacetime: The Foundation...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Exploiting Artificial Intelligence for Empowering Researchers and Faculty, In...
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Community pharmacy- Social and preventive pharmacy UNIT 5
Community pharmacy- Social and preventive pharmacy UNIT 5
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
BÀI TẬP BỔ TRỢ TIẾNG ANH 8 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2023-2024 (CÓ FI...
How to Manage Your Lost Opportunities in Odoo 17 CRM
How to Manage Your Lost Opportunities in Odoo 17 CRM
2.1. Synthesis of unzipped graphene oxide1. MWCNTs with outer.docx
- 1. 2.1. Synthesis of unzipped graphene oxide: 1. MWCNTs with outer diameters of 110-170 nm (1.0 g) was reacted with potassium permanganate (10 g) (1:10 mass ratio MWCNT to potassium permanganate in a vigorously-stirred mixture of concentrated sulfuric acid (280 ml) and concentrated phosphoric acid (32 ml) (9:1 acid ratio) at 65 C for 4 h. 2. The reaction mixture was then cooled to room temperature and poured over ice water (800 ml) containing hydrogen peroxide (40 ml, 30 %). 3. The resulting mixture was congealed overnight then filtered (0.2 mm mesh PTFE from Millipore), and washed in succession with hydrochloric acid (30 %), ethanol (100 %), and diethyl ether (anhydrous). 4. The final black material was dried at low heat (65 C) in a vacuum oven overnight. 2.2. Synthesis of conducting polymers 1. The pyrrole (0.8mol, 1.67ml) was dissolved in 30 ml of water and ethanol mixture (1:1) and sonicate for30 min. 2. Then ferric chloride solution (0.8 mol ferric chloride in 20 Ml of water, 2.6g) was added dropwise to the pyrrole under vigorous stirring for 24 h. 3. The obtained material was washed several times with a mixture of water and ethanol until the solution became colorless, and dried in a vacuum at 75 oC for 24 h. 2.3. Synthesis of nanocomposites 1. First, graphite oxide was dispersed in 50 ML of water under ultrasonication for 30 min. 2. The pyrrole (0.08 mol) was dissolved in 30 ML of water and ethanol mixture (1:1). 3. The resultant solution was then added to the dispersion of GO solution under ultrasonication for another 30 min. 4. The ferric chloride solution (0.04 mol ferric chloride in 20
- 2. Ml of water) was added dropwise to the pyrrole and GO mixture under vigorous stirring for 24 h. 5. The weight ratio of pyrrole to graphite oxide was varied as 99.5:0.5,and the resulting composite were donated as 0.5PPyGO, 6. The PPy/GO composites obtained was washed several times with a mixture of water and ethanol until the solution became colorless, and dried in a vacuum at 75 oC for 24 h. For comparison, the neat PPy was also polymerized by similar method without the presence of GO suspension. 2.5. Characterizations: The synthesized materials were characterized using variety of techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and BET Surface Area and Pore Size Distribution Measurement Techniques, and electrochemical measurements. More information of these techniques is given below I need you after reading the experiment analysis the data please