2. August 2022 - EHS Induction-Refresh -Rev3.pptx

1
© TT Electronics
Health, Safety and
Environment (HSE)
Induction
– Refresher Training
By :
Ts. Luqmanulhafiz Ramli

2
© TT Electronics
•Do not shake hands
Tidak berjabat tangan
•Practicing ethics of coughing and sneezing
Mengamalkan etika batuk dan bersin
•Use the hand sanitizer provided at the factory main entrance.
Gunakan pembasmi kuman tangan yang disediakan di pintu
masuk utama kilang
•Frequent sanitation schedule reminders
Peringatan jadual sanitasi yang kerap
•Postponed all large-scale meetings and events
Mesyuarat dan acara skala besar ditangguhkan
•Sick workers, rest at home
Pekerja sakit, rehat di rumah
•Assess official travel risk for staff
Menilai risiko perjalanan rasmi untuk kakitangan
•Limit food handling and food sharing
Hadkan pengendalian makanan dan kongsi makanan
•Improve hygiene and health screening
Meningkatkan kebersihan dan saringan kesihatan
TT Kuantan – Covid19 Prevention
How to prevent COVID-19 at workplace?
Bagaimanakah cara untuk mencegah COVID-19 di tempat kerja?

3
© TT Electronics
TT Kuantan – EHS Induction for Employees
Occupational Safety & Health (OHS) Policy
Polisi Keselamatan & Kesihatan Pekerjaan (KKP)
• Provide adequate awareness and training to all personnel in relation to OSH
Memberi kesedaran dan latihan yang secukupnya kepada semua pekerja berkaitan degan KKP
• Taking proactive measures by providing Safe and Healthy working environment for the prevention of work related injuries and health
hazards.
Mengambil langkah proaktif dengan menyediakan persekitaran kerja yang Selamat dan Sihat bagi pencegahan
kecederaan dan bahaya kesihatan berkaitan dengan pekerjaan
• Eliminate HAZARDS and reduce OSH risks
Mengurangkan bahaya dan risiko dalam pekerjaan
• Complying to applicable legal and other requirement to which the organization subscribed to
Pematuhan kepada keperluan undang-undang dan lain-lain untuk mana organisasi melanggan.
• Encourage consultation and participation of employees in OSH programs
Mengalakkan perundingan dan penyertaan pekerja dalam program KKP
• Continually improve OHS performance to achieve our aim of zero harm and good health
Sentiasa meningkatkan prestasi OHS bagi mencapai matlamat sifar bahaya dan kesihatan yang baik

4
© TT Electronics
Environmental Policy
Polisi Alam Sekitar
• Practicing 3R (Reduce, Reuse & Recycle) in all type of activities within all levels of the entire organization
Mempraktikkan 3R (Reduce, Reuse & Recycle) dalam semua jenis aktiviti di semua peringkat seluruh organisasi
• Producing products within the guidelines of resources conservation and are free from pollution, where technologically possible.
Menghasilkan produk mengikut garis panduan pemuliharaan sumber dan bebas daripada pencemaran, di mana
mungkin dari segi teknologi
• Protect the environment by minimizing the impact of operation by reducing waste, prevent air, water and land pollution, and
minimize the consumption of natural resources.
Lindungi Alam sekitar dengan meminimumkan operasi yang memberi kesan kepada persekitaran dengan
mengurangi sisa, mencegah pencemaran udara, air dan darat, dan minimumkan penggunaan sumber semula jadi.
• Fulfil the applicable environmental statutory regulations, customer and other requirements.
Memenuhi peraturan perundangan alam sekitar, pelanggan dan keperluan lain yang berlaku.
• Consistently educate our employees, suppliers and business associates to increase their awareness of the EMS for continuous
improvement in environmental preservation and protection.
Mendidik pekerja, pembekal dan rakan perniagaan secara konsisten untuk meningkatkan kesedaran mereka
dalam EMS untuk peningkatan berterusan dalam pemeliharaan dan perlindungan alam sekitar

5
© TT Electronics
Employees Responsibilities under Occupational Safety and Health (OSHA) - Sec. 24
Tanggungjawab Pekerja di bawah Akta keselamatan dan Kesihatan Pekerjaan - Sek. 24
• To take reasonable care at work for the safety & heath of yourself and other persons
Untuk mengambil penjagaan yang munasabah di atas diri sendiri dan pekerja lain di tempat kerja
• To wear or use any protective and clothing provided by the employer
Untuk memakai atau menggunakan apa-apa alat perlindungan dan pakaian yang disediakan oleh majikan
• To cooperate with the employer or any other person in the discharge of any duty, under the act or regulations
Untuk bekerjasama dengan majikan atau mana-mana orang lain dalam menunaikan apa-apa kewajipan, di bawah akta atau
peraturan-peraturan
• To comply with any instruction or measure on occupational safety and health as required under the regulations
Mematuhi apa-apa arahan atau langkah keselamatan dan kesihatan seperti yang dikehendaki di bawah peraturan-peraturan
• To report any incident/accident occurred in the workplace to the person in charge
Melaporkan sebarang kejadian kemalangan yang berlaku di tempat kerja kepada orang yang bertanggungjawab
A person who contravenes the provisions of this section be liable to be fine not exceeding one thousand ringgit (RM1000) or to
imprisoned for a term not exceeding three (3) months or both.
Seseorang yang melanggar peruntukan seksyen ini boleh didenda tidak melebihi satu ribu ringgit
(RM1000) atau dipenjarakan selama tempoh tidak melebihi tiga (3) bulan atau kedua-duanya.

6
© TT Electronics
TT Kuantan – Hazard Reporting Tools

7
© TT Electronics
TT Kuantan – Hazard Reporting Tools

8
© TT Electronics
Unsafe Act and Unsafe Condition
Perbuatan dan Keadaan yang tidak selamat
Unsafe Act (Perbuatan Tidak Selamat)
Activity that is conducted in a manner that may threaten the health
and/or safety of workers.
Satu aktiviti yang dijalankan dengan cara yang boleh mendatangkan
bahaya kepada kesihatan dan/ atau keselamatan pekerja.
Unsafe Condition (Keadaan Tidak Selamat)
Condition in a workplace that is likely to cause property damage or
injury.
Satu keadaan ditempat kerja yang boleh menyebabkan kerosakan
harta dan kecederaan.
Example ( Contoh) : Example ( Contoh) :
• Using defective equipment .
Menggunakan peralatan yang rosak.
• Improper placement
Meletakkan peralatan di tempat yang tidak
sesuai.
• Improper lifting
Cara mengangkat yang tidak betul.
• Improper use of PPE
Menggunakan PPE yang tidak sesuai.
• Using equipment improperly
Menggunakan peralatan dengan cara yang
tidak betul.
• Defective equipment .
Peralatan yang rosak.
• Inadequate guards or barriers.
Penghadang yang tidak mencukupi.
• Poor Housekeeping , disorderly workplace.
Tempat kerja yang tidak kemas atau tidak
teratur.
• Inadequate ventilation
Pengudaraan yang tidak mencukupi.
• Excessive noise exposures.
Terdedah kepada bunyi yang sangat bising.

9
© TT Electronics
Examples of consequence from the accident
Contoh-contoh kesan dari kemalangan

10
© TT Electronics
Emergency Response Plan
Pelan Tindakan Kecemasan
• Procedure to follow in various emergency scenarios (e.g. fire, explosion, chemical spills, flood, violence, etc)
Prosedur untuk diikuti dalam senario kecemasan (contohnya kebakaran, letupan, tumpahan kimia, banjir, keganasan dan lain-lain
• Aware of the emergency route & evacuation procedure.
Tahu laluan kecemasan dan prosedur pengosongan
• Knows the emergency evacuation procedures, location of the emergency equipments and emergency zone
Tahu prosedur-prosedur kecemasan, tempat-tempat alat-alat kecemasan dan zon-zon kecemasan
• Knows the assembly area during emergency & adhere to the given instruction
Tahu tempat berkumpul semasa kecemasan dan patuh kepada arahan-arahan yang diberikan
• Knows the emergency phone numbers (Fire Department, Ambulance, Police)
Mengetahui nombor telefon kecemasan (Jabatan Bomba, Ambulans, Bantuan Perubatan & Polis)
Emergency Numbers :
Nombor Kecemasan:
POLIS / AMBULANCE - 999 /112 (MOBILE)
/ BOMBA
Local authorities contact no :
No panggilan pihak berkuasa tempatan:
1. HTAA - 09-5572222/ 5572547
2. JPAM - 09- 5171991
3. BOMBA - 09- 5130994 / 5139012
4. KMC - 09- 5902828
5. KPJ - 09- 5678098
6. DMMC - 09-5349988
7. POLIS - 09-5132222

11
© TT Electronics
Emergency Evacuation Procedure
Prosedur Pengosongan Kecemasan
Never enter hazardous area without proper PPE
Jangan masuk ke tempat yang berbahaya tanpa alat perlindungan diri
yang betul.
The Zone Leader to ensure the headcount at the Zone is as per the
name list.
Ketua Zon perlu pastikan jumlah pekerja yang berada dalam Zon
sama seperti yang terdapat dalam senarai nama pekerja
Remain at the designated assembly area until the plant is safe.
Kekal di tempat berkumpul sehingga keadaan selamat.
Stop all operation
Berhenti dari melakukan kerja.
Exit the building using the nearest emergency exit
door in 3 minutes.
Keluar dari bangunan dengan menggunakan pintu
kecemasan yang terdekat dalam masa 3 minit.
Gather at designated assembly area Zone
A/B/C and wait instruction from Zone Leader.
Berkumpul di tempat berkumpul Zon A/B/C
dan tunggu arahan dari ketua Zon.

12
© TT Electronics
Emergency Response Team (ERT)
Pasukan Tindakan Kecemasan
Emergency Manager (EM)
Historian
Emergency Controller (EC) Incident Controller (IC) Security Controller (SC)
Incident
Controller 1
Incident
Controller 2
First Aider
Maintenance
Team
HAZMAT
Team
Fire Fighter
& SAR Team
Traffic
Security
Fire
Warden
B
Fire
Warden
C
Contract
Security
Fire
Warden
A
Certified
First Aider

13
© TT Electronics
Assembly Point Area
Tempat Berkumpul
Assembly Point C
At warehouse receiving bay.
Assembly Point A
In front of Guard House.
Assembly Point B
Near second entrance gate.
Assembly Point D
Near TM Tower at GMS.

14
© TT Electronics
How to use Fire Extinguisher ?
Bagaimana untuk menggunakan Alat Pemadam Api?
P– PULL (TARIK)
Pull the pin.
Tarik pin.
A– AIM (TUJU)
Aim the nozzle at base
of fire.
Tujukan nozel ke dasar
api.
S– SQUEEZE (TEKAN)
Squeeze the lever.
Tekan tuil.
S– SWEEP (LAYANGKAN)
Sweep the nozzle from side
to side.
Layangkan nozel ke kiri dan
ke kanan.
1
2
3
4

15
© TT Electronics
Personal Protective Equipment (PPE)
Alat Perlindungan Diri
• Personal protective equipment, commonly referred to as "PPE", is equipment worn to minimize exposure to a variety of
hazards that cause serious workplace injuries and illnesses.
Alat perlindungan diri kebiasaannya disebut sebgai “PPE” ialat satu alat yang dipakai untuk mengurangkan pendedahan kepada
pelbagai jenis bahaya yang boleh menyebabkan kecederaan dan penyakit yang parah.
• PEE will be distributed with Free of Charge, so use wisely.
PPE diberikan secara percuma, gunakan dengan bijak.
• Always wear suitable PPE according to the job specification and during handling critical processes .
Sentiasa memakai Alat Perlindungan Diri yang sesuai mengikut spesifikasi kerja dan semasa melakukan kerja-kerja
yang boleh mendatangkan bahaya.
The importance of PPE
Kepentingan Alat Perlindungan Diri
• To protect ourself from health and safety risk on the job.
Untuk melindungi diri daripada risiko kesihatan dan keselamatan yang terhasil daripada tugas.
• To reduce the exposure from hazards.
Untuk mengurangkan pendedahan kepada bahaya.
• To ensure a safe working environment.
Untuk memastikan persekitaran kerja yang selamat.
• To comply with the regulations by government.
Untuk mematuhi undang-undang yang telah ditetapkan oleh kerajaan.

16
© TT Electronics
Chemical Handling / Chemical Exposure
Pengendalian / Pendedahan Bahan Kimia
• Store and handle carefully with properly ventilated & no direct exposure from sunlight or other heat source.
Simpan dan kendali bahan kimia dengan berhati-hati dan tidak terdedah kepada cahaya matahari atau sumber haba.
• Read and understand the SDS or SOP’s before handling any chemicals.
Baca dan fahami “SDS” atau “SOP” sebelum mengedalikan bahan-bahan kimia.
• Container must be properly labeled according to the Std. requirement. (Hazard must be identified on the labels).
Bekas mesti dilabelkan dengan betul mengikut Std. keperluan. (Hazard mesti dikenal pasti pada label tersebut).
• No spill during transferring from Primary container to Secondary containers.
Pastikan tiada tumpahan semasa memindahkan bahan kimia daripada bekas asal kepada bekas yang lain yang lebih kecil.
• Always wear the appropriate personal protective equipment (PPE). E.g. latex glove (nitride), mask, safety shoes, etc.
Sentiasa memakai alat perlindungan diri yang sesuai, contoh seperti sarung tangan susu getah (nitrida), topeng, kasut keselamatan, dll.
• Foods stuffs cannot be stored near chemical storage area. Eating and drinking inside the working area is prohibited.
Makanan tidak boleh di simpan berhampiran tempat simpanan bahan kimia. Dilarang makan dan minum di dalam kawasan kerja .

17
© TT Electronics
Safe Operating Procedure
(Operasi Kendalian Selamat)
Safety Data Sheet
(Helaian Data Keselamatan)
Chemical Label
(Label Bahan Kimia)
Chemical Storage
(Tempat Penyimpanan Bahan Kimia)
Yellow Cabinet
(Kabinet Kuning)

18
© TT Electronics
Machine Safety
Keselamatan Jentera
• Always wear proper PPE and ask for better understanding when dealing with dangerous equipment & workplace.
Sentiasa memakai PPE yang betul dan bertanya untuk mendapatkan penjelasan yang betul apabila berurusan dengan peralatan
berbahaya & tempat kerja.
• Do not operate if the machine is not well operated as usual or without proper guarding. Stop the operation and report to
supervisor for next action.
Jangan menggunakan mesin jika mesin tidak berada dalam keadaan biasa atau tanpa alat perlindungan yang sesuai. Berhenti
dari melakukan kerja dan laporkan kepada penyelia untuk tindakan selanjutnya.
• Take note of the precautions, danger signs at the workplace.
Ambil tahu tentang amaran-amaran, peringatan-peringatan dan tanda-tanda amaran yang diletakkan di tempat kerja
• Read and understand the SOP before handling the electrical appliance.
Baca dan fahami SOP sebelum mengendalikan peralatan elektrik.
Welding MC Molded Forming MC Molded Pressing
MC
Varnish Area-Crane
Operation
Solder Pot Pallet Truck
Dangerous Equipment (Jentera yang berbahaya)

19
© TT Electronics
Electrical Safety (Keselamatan Elektrik)
• Aware about electrical safety and know the effect of not following electrical safety rule. E.g. electric
shock.
Sentiasa waspada akan elektrik dan tahu kesan tidak mematuhi arahan keselamatan. E.g. kejutan
elektrik.
• Wear an appropriate PPE. E.g.: Shoes, High voltage resistant coverall, nonconductive safety helmet,
rubber insulating gloves and goggle.
Pakai alat pelindung diri yang sesuai. Contoh, kasut yang betanda ‘EH’(hazad elektrik), topi keselamatan
berpenebat,sarung tangan getah berpenebat dan cermin mata keselamatan.
• Always ask for better understanding prior to handling electrical appliance.
Sentiasa bertanya untuk mendapatkan penjelasan yang betul sebelum mengendalikan peralatan
elektrik.
• Read and understand the SOP before handling the electrical appliance.
Baca dan fahami SOP sebelum mengendalikan peralatan elektrik.
• Take note of the precautions and danger signage’s.
Ambil perhatian tentang peringatan-peringatan dan tanda-tanda amaran.

20
© TT Electronics
Electrical Safety (Keselamatan Elektrik)
Effects of fire on machinery
(Kesan kebakaran pada jentera)
The condition of victim
(Keadaan mangsa)

21
© TT Electronics
Sexual Harassment, Violence and Managing Stress
Gangguan Seksual, Keganasan dan Pengurusan Stress
• Do not wear inappropriate clothes (dressed sexily) and attempt to seduce others.
Jangan memakai pakaian yang tidak sesuai (berpakaian seksi) dan cuba menggoda orang
lain.
• Do not tend to bully and do violence to others.
Jangan membuli dan melakukan keganasan terhadap orang lain.
• Report to the Supervisor in-charge if noticed any sexual harassment activities or bullying.
Laporkan kepada Penyelia bertanggungjawab jika perasan terhadap apa-apa gangguan
seksual atau aktiviti membuli.
• Avoid stress. Take a break about 3 to 5 minutes, breathe deeply, relax, move your body
and do slight exercise or drink a little water.
Elakkan tekanan. Berehat 3 hingga 5 minit, tarik nafas panjang, berehat, gerakkan badan
anda dan lakukan senaman ringan atau minum sedikit air.

22
© TT Electronics
Sanitation, Environmental Safety and Health
Kebersihan, Kesihatan dan Keselamatan Alam Sekitar
• No damage to the environment such as littering .
Jangan melakukan kerosakan pada persekitaran seperti membuang sampah.
• Do not throw trash, tissue or napkin, etc. into the toilet.
Jangan buang sampah, tisu, tuala wanita dan sebagainya ke dalam lubang tandas.
• Smoking is strictly prohibited at workplace.
Merokok adalah dilarang di tempat kerja.
• Maintain your personal work area in clean and orderly manner and practicing 5S.
Pastikan tempat kerja bersih dan teratur dan sentiasa amalkan 5S.
• All waste generated from the process shall be segregate and disposed according to
schedule waste management.
Semua bahan buangan yang dihasilkan daripada proses mestilah diasingkan dan dilupuskan
mengikut pengurusan buangan terjadual.
• Cardboards, Plastic parts, General Waste and Domestic Waste shall be disposed at disposal
area.
Kadbod, Plastik, Sisa Am dan Sisa Domestic hendaklah dilupuskan di kawasan pelupusan

23
© TT Electronics
Ergonomics Issues (Isu Ergonomik)
• Ergonomics is “designing the job to fit the workers & not forcing the worker to
fit the job”.
Ergonomik adalah ‘mereka bentuk sesuatu kerja untuk menyesuaikan dengan
pekerja, dan bukannya untuk memaksa pekerja untuk menyesuaikan kerja’.
• Musculoskeletal disorder (MSD), happen due to repetitive motion or awkward
movements.
Penyakit Muskuloskeletal (MSD) berlaku disebabkan oleh gerakan berulang-
ulang atau pergerakan janggal.
• Be alert with your body posture, do not stand or sit in awkward position.
Sila berwaspada dengan postur badan anda. Jangan berdiri atau duduk
dalam keadaan janggal.
• Always alternate posture as well as movements.
Sentiasa tukar postur badan dengan pergerakan.
• Use proper method of lifting loads or use mechanical aids such as trolley.
Gunakan kaedah yang betul untuk mengangkat beban atau menggunakan alat
bantuan mekanikal seperti troli.

24
© TT Electronics
Stairs / Stepladders Safety
Keselamatan tangga
Always hold the handrail.
Sentiasa gunakan pemegang tangan.
Don’t carry heavy objects and don’t block your view.
Jangan bawa barang yang berat dan jangan sekat
pandangan anda.
Don’t hurry and use smartphone going up and down
the stairs.
Jangan bergegas dan gunakan telefon pintar ketika
menaiki dan menuruni tangga .
Clean up any debris or spills on stairs immediately.
Keep stairs clear.
Segera bersihkan tangga dari sebarang kotoran atau
tumpahan. Pastikan tangga sentiasa bersih.
Maintain 3 points of contact (2 hands 1 foot / 2 feet 1 hand) .
Sentiasa dengan 3 titik pegangan (2 tangan 1 kaki/2 kaki 1
tangan).
Face the ladder while climbing up or down.
Hadapkan muka pada tangga ketika naik dan turun.
Only put ladder on a stable level of surface.
Hanya letakkan tangga pada permukaan yang stabil.
Keep slippery materials away from ladders.
Jauhkan bahan yang licin dari tangga .
Stairs Stepladders

25
© TT Electronics
Personal Safety Responsibilities
Tanggungjawab Keselamatan Peribadi
• Understand & follow all the safety & health instruction, signage’s, procedures and safer working procedures in the work place.
Fahami dan ikut segala arahan-arahan keselamatan dan kesihatan, papan-papan tanda dan prosedur kerja selamat di tempat
kerja.
• Never operate any equipment & machinery unless you have been properly trained.
Jangan sesekali menjalankan mesin-mesin atau alat-alat tanpa diberi penerangan dan di ajar dengan betul.
• Attend all the safety training that your employer offer.
Hadiri setiap latihan keselamatan yang diberikan oleh majikan
• Talk & suggest to the management if you have any safety & health issues in the work place.
Beri cadangan-cadangan kepada pengurusan jika terdapat isu-isu berkenaan dengan kesihatan dan keselamatan di tempat kerja.
• All incidents / accidents and near-misses should be reported to the management for action.
Setiap kemalangan atau insiden dan kemalangan nyaris, perlu di laporkan kepada pihak pengurusan supaya tindakan pencegahan
dapat diambil.
• Do not use hand phone, ear phone or listening songs while working at the place of work and commit vandalism to the property of
the factory.
Jangan gunakan telefon bimbit atau mendengar lagu semasa berada di tempat kerja dan melakukan vandalisma atau merosakkan
harta benda kilang
• Do not block the emergency routes by putting any equipment’s or object on the routes.
Jangan menghalang laluan kecemasan di kilang seperti meletakkan sesuatu peralatan atau objek di atas laluan tersebut.

26
© TT Electronics
TT Kuantan – HSE Road to Zero Harm
Revise
dashboards
for effective
management
review
Further
develop
forum for best
practice
sharing
Review
structures and
accountability
for HSE
management
Create Global
Minimum HSE
Standards
Introduce
internal HSE
audit
programme
Peer audits to consider
legislative compliance,
management infrastructure &
review and best practice. Trained
auditors will develop each other
through experience gained from
peer audits
Dashboards are a visual health
check, clear on audit findings
and performance in corrective
action closure, clear on KPI’s
including accidents, incidents,
hazards and environmental
impact and clear on
organisational or competency
gap closure plans
Create 15 standards for rollout
over three phases against which
we will train
Ensure that competencies are
identified and that all businesses
have access to capable resource
to support them in their strive
for zero harm
Continue the good work of
councils and forums to share
best practices throughout the
organisation (revitalised in 2022)

27
© TT Electronics
TT Kuantan – HSE Road to Zero Harm
TT Electronics Global Minimum HSE Standards Project Pan
Phase One complete.
• Sites now need to complete
a site review
• Establish gaps and action
plan
• Target complete to level 2
by end 2022 – phase 1
• Internal audit completed for
Phase 1 standards
QTR 3-4
• Phase 2-3 Standards will be
released for same process
to allow time before full
internal audit in 2023

28
© TT Electronics
Managers/Supervisors/Team Leaders
Key Accountabilities
(What is to be achieved)
• Demonstrate safe working processes and behaviours.
Ensure these are being followed by all employees and
contractors in their place of work
Key Tasks
(How are they to be achieved)
Ensure compliance with the site's safety procedures
and standards. Specific activities should include:
• Ensure regular plant and operational checks are
carried out
• Be actively involved in incident investigation and
report verification
• Ensure all incidents are reported and recorded
• Ensure corrective actions are implemented in a
timely manner
• Attend health and safety meetings and toolbox
talks as and when required
• Actively seek to get employees involved in all
health and safety activities, including reporting
new hazards
• Make sure all employees are wearing the correct
PPE as required
TT Kuantan – HSE Road to Zero Harm - HSE Leadership Accountability and Expectations

29
© TT Electronics
Managers/Supervisors/Team Leaders
• Follow up on team/individual health and safety
concerns
• Ensure all team members are trained and
competent to undertake their tasks
• Inspect team working and behaviors each day
• Provide safety advice to staff and peers where
appropriate
• Seek health and safety advice when necessary
• Provide feedback on safety standards
• Ensure the competence of employees and
contractors. Use the appropriate people
management and training tools to ensure people
are fit and competent to undertake their tasks
• Support the Operations General Manager to
improve H&S performance
• Inform the site manager of safety performance,
projects, compliance, risks and serious incidents
TT Kuantan – HSE Road to Zero Harm - HSE Leadership Accountability and Expectations

2. August 2022 - EHS Induction-Refresh -Rev3.pptx

Recommended

Recommended

More Related Content

What's hot

What's hot (20)

Similar to 2. August 2022 - EHS Induction-Refresh -Rev3.pptx

Similar to 2. August 2022 - EHS Induction-Refresh -Rev3.pptx (20)

More from LuQmanulhafizRamli1

More from LuQmanulhafizRamli1 (6)

Recently uploaded

Recently uploaded (9)

2. August 2022 - EHS Induction-Refresh -Rev3.pptx