The document describes Tirfor lifting and pulling machines. Tirfor machines use wire rope and lever operation to lift, lower, and position loads. They are suitable for construction, industrial, and marine applications. Powered Tirfor models are also described, which use hydraulics or pneumatics for continuous, fatigue-free operation controlled remotely or by one operator. Accessories like sheave blocks and anchors are available to increase capacities and provide secure load attachment.
The document discusses ASME B30.5, the safety standard for mobile and locomotive cranes. It provides definitions for key terms, the scope of equipment covered, and requirements for load ratings, construction, and characteristics. The standard requires load rating charts showing the full range of rated capacities based on factors like boom length, outrigger position, and radius. The charts must be clearly displayed and include warnings or limitations. Requirements are provided for load ratings determined by stability or structural competence, and diagrams must be supplied by the manufacturer.
This document summarizes OSHA regulations regarding stairways and ladders under 29 CFR 1926.1050-1053. It covers topics such as requirements for stair components, railings, landings and temporary stairs. It also discusses different types of ladders, including portable, fixed and self-supporting ladders. Specific requirements are outlined for ladder dimensions, coatings, climbing angles and safety devices. The document emphasizes that employers must train all employees on recognizing hazards associated with stairs and ladders and how to properly erect, maintain and use fall protection equipment.
The document discusses different types of cranes, their specifications, and safe operation practices. It describes various cranes including tower cranes, mobile cranes, overhead cranes, floating cranes, and aerial cranes. For each type, it provides lifting capacity, working radius, and typical uses. The document concludes by listing common crane failure causes and safety tips for crane operation such as checking equipment, avoiding shock loads, and not leaving suspended loads unattended.
This document provides an overview of cranes and crane safety features. It defines what a crane is and describes the basic principle of how they lift loads. It then covers the different types of cranes including mobile, stationary, mechanical, hydraulic, lattice boom, and telescopic boom cranes. The document discusses crane components, configurations, basic operations like hoisting and slewing. It also outlines important safety features found on cranes like A2B systems, boom hoist limits, overload limits, and load moment indicators. Controlled load lowering is described as well.
This document provides an operations and maintenance manual for electric overhead cranes. It includes sections on system description, operating instructions, maintenance instructions, troubleshooting, safety instructions, and periodic inspection charts. The document was created by Century Crane Engineers Pvt. Ltd. and provides information on crane components, types of cranes, system operation, power feeding arrangements, and descriptions of brakes and limit switches.
Presentation give detailed information pertaining to the EOT Crane generally known as electric overhead travelling crane . Information is inclusive with photos , type of EOT Crane and individual type of crane 's feature and description.
SHREE KRISHNA ENGINEERING CO based in Ahmedabad, India is No 1 manufacture & Supplier of EOT Crane,SINGLE GIRDER EOT CRANE,DOUBLE GIRDER EOT CRANE,EOT TROLLEY ,JIB CRANE,CRAB WINCH,LIFTING MAGNET,Hoisting Equipments,WIRE ROPE HOIST.
Further information is accessible at http://www.eotcranes.in/
Ambica Engineering Company is leading Crane Company in Ahmedabad, Gujarat, India. It's offered cranes are EOT Crane, Single & Double Girder EOT Crane, Goliath Gantry Crane, Electric wire rope Hoist and other material handling equipments with excellent quality and largely available in global market.
The document discusses ASME B30.5, the safety standard for mobile and locomotive cranes. It provides definitions for key terms, the scope of equipment covered, and requirements for load ratings, construction, and characteristics. The standard requires load rating charts showing the full range of rated capacities based on factors like boom length, outrigger position, and radius. The charts must be clearly displayed and include warnings or limitations. Requirements are provided for load ratings determined by stability or structural competence, and diagrams must be supplied by the manufacturer.
This document summarizes OSHA regulations regarding stairways and ladders under 29 CFR 1926.1050-1053. It covers topics such as requirements for stair components, railings, landings and temporary stairs. It also discusses different types of ladders, including portable, fixed and self-supporting ladders. Specific requirements are outlined for ladder dimensions, coatings, climbing angles and safety devices. The document emphasizes that employers must train all employees on recognizing hazards associated with stairs and ladders and how to properly erect, maintain and use fall protection equipment.
The document discusses different types of cranes, their specifications, and safe operation practices. It describes various cranes including tower cranes, mobile cranes, overhead cranes, floating cranes, and aerial cranes. For each type, it provides lifting capacity, working radius, and typical uses. The document concludes by listing common crane failure causes and safety tips for crane operation such as checking equipment, avoiding shock loads, and not leaving suspended loads unattended.
This document provides an overview of cranes and crane safety features. It defines what a crane is and describes the basic principle of how they lift loads. It then covers the different types of cranes including mobile, stationary, mechanical, hydraulic, lattice boom, and telescopic boom cranes. The document discusses crane components, configurations, basic operations like hoisting and slewing. It also outlines important safety features found on cranes like A2B systems, boom hoist limits, overload limits, and load moment indicators. Controlled load lowering is described as well.
This document provides an operations and maintenance manual for electric overhead cranes. It includes sections on system description, operating instructions, maintenance instructions, troubleshooting, safety instructions, and periodic inspection charts. The document was created by Century Crane Engineers Pvt. Ltd. and provides information on crane components, types of cranes, system operation, power feeding arrangements, and descriptions of brakes and limit switches.
Presentation give detailed information pertaining to the EOT Crane generally known as electric overhead travelling crane . Information is inclusive with photos , type of EOT Crane and individual type of crane 's feature and description.
SHREE KRISHNA ENGINEERING CO based in Ahmedabad, India is No 1 manufacture & Supplier of EOT Crane,SINGLE GIRDER EOT CRANE,DOUBLE GIRDER EOT CRANE,EOT TROLLEY ,JIB CRANE,CRAB WINCH,LIFTING MAGNET,Hoisting Equipments,WIRE ROPE HOIST.
Further information is accessible at http://www.eotcranes.in/
Ambica Engineering Company is leading Crane Company in Ahmedabad, Gujarat, India. It's offered cranes are EOT Crane, Single & Double Girder EOT Crane, Goliath Gantry Crane, Electric wire rope Hoist and other material handling equipments with excellent quality and largely available in global market.
The document provides an overview of electric cranes, including their structure, types, operation, and maintenance. It discusses various crane types such as overhead cranes, mobile cranes, rough terrain cranes, all-terrain cranes, tower cranes, floating cranes, and gantry cranes. Electric cranes offer advantages over other cranes as they are more environmentally friendly and quiet. The document also outlines crane safety tips and maintenance.
A crane is a tower or derrick equipped with cables and pulleys used to lift and lower materials. There are several types of cranes including mobile cranes with a boom mounted on a mobile platform, telescopic cranes with a boom that extends or retracts hydraulic tubes to adjust length, and tower cranes fixed to the ground used for tall buildings. Other cranes include truck mounted cranes with outriggers, rough terrain cranes on rubber tires for off-road use, loader cranes on trailers to load equipment, and overhead cranes in factories. Cranes are commonly used in construction and excavation to move equipment.
1) The document discusses different types of cranes and their identification and load capacity requirements.
2) Crane operators must know how to use lifting charts and cranes require regular maintenance and inspections according to safety schedules.
3) Cranes have a number of safety devices incorporated in their design including overtravel switches, protections for bare conductors, clearly marked controls, and load indicators.
Volvo ec220 d lr ec220dlr excavator service repair manualjfjkskefksmem
- The document provides instructions for replacing the counterweight on an excavator.
- It describes removing covers and brackets from the top of the counterweight, disconnecting wiring, and using cables to lift the counterweight off the excavator.
- The instructions then cover installing the new counterweight, reattaching wiring and brackets, and securing the counterweight in place with mounting screws.
Belt conveyor and Haulage system in the mineAnurag Jha
This document is a project report submitted by Anurag Kumar Jha to the Department of Mining Engineering at Indian Institute of Engineering Science and Technology, Shibpur in partial fulfillment of the requirements for a dual Bachelor of Technology and Master of Technology degree in Mining Engineering. The project distinguishes and compares mine performance using conveyor belt and haulage systems for transportation. It covers different types of haulage systems used in underground mines like rope haulage, conveyor systems, transport arrangements, direct rope haulage, endless haulage, main and tail rope haulage, gravity haulage and safety devices. It also discusses factors for selecting belt conveyors and their design, including loop take up arrangements for tensioning. The document
Universal joints provide a simple and economic method of connecting shafts whose axes are at an angle. They avoid the need for precise alignment, thereby reducing assembly costs. Universal joints are frequently used in agricultural, textile, and machine tool applications like multi-spindle drilling machines and lathes.
Jost’s Electric Stacker are Ideal, simple & effective solutions for stacking & vertical storage space in warehouses & are used in the widest range of app.
An EOT crane, or electric overhead travelling crane, is a type of crane used for lifting heavy objects that operates along rails on the floor and ceiling of a facility. It consists of a bridge that can move horizontally along rails above the floor, with a hoisting mechanism and hook attached to move vertically. EOT cranes work by using electric motors and gear systems to power horizontal and vertical movement. They have advantages like easy maintenance and repair, simple construction, and moderate costs. Common applications of EOT cranes include use in workshops, shipyards, mining facilities, construction sites, and industrial plants.
Jost’s Electric Stacker are Ideal, simple & effective solutions for stacking & vertical storage space in warehouses & are used in the widest range of app.
The 1230ES Mast Lift is a compact 12-foot scissor lift with industry-leading duty cycles. It features a saloon-style entry gate, tool tray, 110V outlet in the platform, and one-hand joystick control. Specifications include a 500 lb capacity platform, 12/12 second lift/lower time, and a 3 mph lowered/0.5 mph elevated drive speed. The lift is covered under JLG's exclusive 1 & 5 warranty for structural components.
As they say, the devil is in the details and it’s no different when prepping and planning for a crane delivery or set-up. In this presentation, Mr. Koberg covers the three factors affecting the size of the crane mat or outrigger pad and provides necessary evaluation tools for sizing mats or pads.
Speaker: Kris Koberg, DICA Outrigger Pads
OSHA and ANSI standards provide requirements for using forklifts to elevate personnel on work platforms. Key requirements include:
- Platforms must have guardrails, personal fall arrest systems, or both if elevated over 47 inches to prevent falls.
- Additional precautions are required when platforms are used on forklifts not designed for elevating workers. Precautions include securely attaching the platform, ensuring the forks cannot pivot up, and not exceeding 1/3 of the forklift's rated capacity.
- Operator platforms on forklifts designed for elevating workers must withstand heavy loads and have overhead protection. Work platforms must be securely attached and centered, and not exceed the forklift
Astec Australia proudly distributes the Breaker Technology Inc (BTI) line of underground mobile equipment in Australia, New Zealand, Papua New Guinea and the Weatern Pacific.
A name synonymous with quality and dependability, BTI (formerly Teledyne Equipment) is one of the heavy hitters when it comes to rock breaking and mobile equipment. Their line of underground mobile equipment meets all existing Tier and DPM requirements. Please see the brief descriptions of their underground mobile equipment below - accompanied by downloadable PDF brochures.
BTI's rugged, economical and utilitarian service vehicles support mine maintenance, safety, and production functions. They are configured as stand alone service vehicles (Low Profile - LP Series) or as interchangeable cassette/carrier combinations (Multi Purpose Vehicle - MPV Series).
Shotcrete Transmix Vehicle
Mine Runner
TM Series Mobile Rockbreaker
ANFO Loader
QS Series Mobile Scaler
Crane Utility Vehicle
Fuel Transfer Vehicle
Fuel Lube Truck
Personnel Carrier Vehicle
Scissor Lift Vehicle
MPV Carrier Cassette Series
This document provides an overview of conveyor belt techniques, including:
- A brief history of conveyor belt development from the late 19th century to present day. Key milestones included the introduction of rubber belts, steel cord belts, and new reinforcing materials.
- The document aims to assist operators, engineers, and project managers by providing elementary data, instructions, and tips for accurate calculations and component selection.
- It covers topics like belt and drive system design, belt materials, calculations, installation examples, and more. The goal is to help understand the background and criteria for optimizing belt and conveyor system selection.
Mitsubishi fd80 n forklift trucks service repair manual snf32c 10011-upufsiekdolskek
This document provides service information for cooling systems for FD80N and FD90N trucks. It includes specifications, an overview of cooling system components, procedures for removing and installing the radiator and related parts, instructions for inspection and adjustment, and troubleshooting guidelines. Removal and installation sections provide preparation steps and sequencing for the radiator, intercooler, and counterweight. Inspection covers the fan belt, while adjustment is focused on proper fan belt tension.
Mitsubishi fd90 n forklift trucks service repair manual snf32c 60011-upfjjskekkdkoepll
This document provides instructions for removing and installing the radiator and intercooler from a truck cooling system. It outlines the preparation steps, removal sequence, suggestions for removal/installation, inspection procedures, and specifications. The key steps are to drain the coolant, remove mounting bolts and hoses, lift out the radiator and intercooler using hooks or a crane, inspect for damage or corrosion, and replace as needed before reinstalling. Specifications include the cooling system type, coolant capacity, water pump and thermostat details, and component weights.
Here are some key characteristics to look for in a best friend:
- Trustworthy - You can share your deepest secrets and feelings with them knowing they won't betray your trust. Loyalty and discretion are important.
- Good listener - They are willing to listen without judgment when you need to talk through problems. They make you feel heard and understood.
- Fun and supportive - They enjoy spending time with you, participating in activities you both enjoy, and are there to cheer you on in both good and bad times.
- Similar values - While beliefs don't need to be identical, looking for someone who shares your core values like honesty, kindness, etc. helps ensure compatibility.
As for having friends of other
Tall Structures
Usually structure or building having height more than 80m is considered as a tall structure.
Generally tall structure may be defined as one that because of its height it is affected by lateral.
Classification: 1. Multi storeyedresidential building.
2. Multi storeyedcommercial building.
3. Tall chimneys.
4. Transmission Towers
5. Cooling towers
Prestressed Concrete
•Prestressis defined as a method of applying pre-compression to control the stresses resulting due to external loads below the neutral axis of the beam tension developed due to external load which is more than the permissible limits of the plain concrete.
Demolition
•The action or process of destroying(demolishing)the building or other structures.
•In congested area, in particular, the quality of demolition technique becomes an essential element which determines the success of revitalization of city.
•In addition to efficiency in demolition, strategies must be adopted to avoid noise, vibration and dust which affect the surrounding environment and there must be efficient disposal of waste products
This document discusses the demolition of structures. It outlines the objectives, planning steps, safety measures, and methods used for demolition. Surveys are conducted to identify hazardous materials and structural details. A demolition plan is then prepared outlining the sequence, equipment, and safety procedures. Common demolition methods include mechanical techniques like wrecking balls, hydraulic breakers, and dismantling, as well as explosives for implosions. Factors like the structure type and location influence the chosen method.
This document provides a case study for the full demolition of a 3-story commercial building located at 12, Jalan Meru in Klang, Selangor. The building needs to be demolished to make way for a new commercial building. Special precautions must be taken due to the building's concrete structure and connections to adjoining buildings. The demolition process will include relocating utility lines, erecting safety hoarding, clearing debris, and properly disposing of waste off-site.
Building services engineering, technical building services, architectural engineering, building engineering, or facilities and services planning engineering refers to the implementation of the engineering for the internal environment and environmental impact of a building.
The document provides an overview of electric cranes, including their structure, types, operation, and maintenance. It discusses various crane types such as overhead cranes, mobile cranes, rough terrain cranes, all-terrain cranes, tower cranes, floating cranes, and gantry cranes. Electric cranes offer advantages over other cranes as they are more environmentally friendly and quiet. The document also outlines crane safety tips and maintenance.
A crane is a tower or derrick equipped with cables and pulleys used to lift and lower materials. There are several types of cranes including mobile cranes with a boom mounted on a mobile platform, telescopic cranes with a boom that extends or retracts hydraulic tubes to adjust length, and tower cranes fixed to the ground used for tall buildings. Other cranes include truck mounted cranes with outriggers, rough terrain cranes on rubber tires for off-road use, loader cranes on trailers to load equipment, and overhead cranes in factories. Cranes are commonly used in construction and excavation to move equipment.
1) The document discusses different types of cranes and their identification and load capacity requirements.
2) Crane operators must know how to use lifting charts and cranes require regular maintenance and inspections according to safety schedules.
3) Cranes have a number of safety devices incorporated in their design including overtravel switches, protections for bare conductors, clearly marked controls, and load indicators.
Volvo ec220 d lr ec220dlr excavator service repair manualjfjkskefksmem
- The document provides instructions for replacing the counterweight on an excavator.
- It describes removing covers and brackets from the top of the counterweight, disconnecting wiring, and using cables to lift the counterweight off the excavator.
- The instructions then cover installing the new counterweight, reattaching wiring and brackets, and securing the counterweight in place with mounting screws.
Belt conveyor and Haulage system in the mineAnurag Jha
This document is a project report submitted by Anurag Kumar Jha to the Department of Mining Engineering at Indian Institute of Engineering Science and Technology, Shibpur in partial fulfillment of the requirements for a dual Bachelor of Technology and Master of Technology degree in Mining Engineering. The project distinguishes and compares mine performance using conveyor belt and haulage systems for transportation. It covers different types of haulage systems used in underground mines like rope haulage, conveyor systems, transport arrangements, direct rope haulage, endless haulage, main and tail rope haulage, gravity haulage and safety devices. It also discusses factors for selecting belt conveyors and their design, including loop take up arrangements for tensioning. The document
Universal joints provide a simple and economic method of connecting shafts whose axes are at an angle. They avoid the need for precise alignment, thereby reducing assembly costs. Universal joints are frequently used in agricultural, textile, and machine tool applications like multi-spindle drilling machines and lathes.
Jost’s Electric Stacker are Ideal, simple & effective solutions for stacking & vertical storage space in warehouses & are used in the widest range of app.
An EOT crane, or electric overhead travelling crane, is a type of crane used for lifting heavy objects that operates along rails on the floor and ceiling of a facility. It consists of a bridge that can move horizontally along rails above the floor, with a hoisting mechanism and hook attached to move vertically. EOT cranes work by using electric motors and gear systems to power horizontal and vertical movement. They have advantages like easy maintenance and repair, simple construction, and moderate costs. Common applications of EOT cranes include use in workshops, shipyards, mining facilities, construction sites, and industrial plants.
Jost’s Electric Stacker are Ideal, simple & effective solutions for stacking & vertical storage space in warehouses & are used in the widest range of app.
The 1230ES Mast Lift is a compact 12-foot scissor lift with industry-leading duty cycles. It features a saloon-style entry gate, tool tray, 110V outlet in the platform, and one-hand joystick control. Specifications include a 500 lb capacity platform, 12/12 second lift/lower time, and a 3 mph lowered/0.5 mph elevated drive speed. The lift is covered under JLG's exclusive 1 & 5 warranty for structural components.
As they say, the devil is in the details and it’s no different when prepping and planning for a crane delivery or set-up. In this presentation, Mr. Koberg covers the three factors affecting the size of the crane mat or outrigger pad and provides necessary evaluation tools for sizing mats or pads.
Speaker: Kris Koberg, DICA Outrigger Pads
OSHA and ANSI standards provide requirements for using forklifts to elevate personnel on work platforms. Key requirements include:
- Platforms must have guardrails, personal fall arrest systems, or both if elevated over 47 inches to prevent falls.
- Additional precautions are required when platforms are used on forklifts not designed for elevating workers. Precautions include securely attaching the platform, ensuring the forks cannot pivot up, and not exceeding 1/3 of the forklift's rated capacity.
- Operator platforms on forklifts designed for elevating workers must withstand heavy loads and have overhead protection. Work platforms must be securely attached and centered, and not exceed the forklift
Astec Australia proudly distributes the Breaker Technology Inc (BTI) line of underground mobile equipment in Australia, New Zealand, Papua New Guinea and the Weatern Pacific.
A name synonymous with quality and dependability, BTI (formerly Teledyne Equipment) is one of the heavy hitters when it comes to rock breaking and mobile equipment. Their line of underground mobile equipment meets all existing Tier and DPM requirements. Please see the brief descriptions of their underground mobile equipment below - accompanied by downloadable PDF brochures.
BTI's rugged, economical and utilitarian service vehicles support mine maintenance, safety, and production functions. They are configured as stand alone service vehicles (Low Profile - LP Series) or as interchangeable cassette/carrier combinations (Multi Purpose Vehicle - MPV Series).
Shotcrete Transmix Vehicle
Mine Runner
TM Series Mobile Rockbreaker
ANFO Loader
QS Series Mobile Scaler
Crane Utility Vehicle
Fuel Transfer Vehicle
Fuel Lube Truck
Personnel Carrier Vehicle
Scissor Lift Vehicle
MPV Carrier Cassette Series
This document provides an overview of conveyor belt techniques, including:
- A brief history of conveyor belt development from the late 19th century to present day. Key milestones included the introduction of rubber belts, steel cord belts, and new reinforcing materials.
- The document aims to assist operators, engineers, and project managers by providing elementary data, instructions, and tips for accurate calculations and component selection.
- It covers topics like belt and drive system design, belt materials, calculations, installation examples, and more. The goal is to help understand the background and criteria for optimizing belt and conveyor system selection.
Mitsubishi fd80 n forklift trucks service repair manual snf32c 10011-upufsiekdolskek
This document provides service information for cooling systems for FD80N and FD90N trucks. It includes specifications, an overview of cooling system components, procedures for removing and installing the radiator and related parts, instructions for inspection and adjustment, and troubleshooting guidelines. Removal and installation sections provide preparation steps and sequencing for the radiator, intercooler, and counterweight. Inspection covers the fan belt, while adjustment is focused on proper fan belt tension.
Mitsubishi fd90 n forklift trucks service repair manual snf32c 60011-upfjjskekkdkoepll
This document provides instructions for removing and installing the radiator and intercooler from a truck cooling system. It outlines the preparation steps, removal sequence, suggestions for removal/installation, inspection procedures, and specifications. The key steps are to drain the coolant, remove mounting bolts and hoses, lift out the radiator and intercooler using hooks or a crane, inspect for damage or corrosion, and replace as needed before reinstalling. Specifications include the cooling system type, coolant capacity, water pump and thermostat details, and component weights.
Here are some key characteristics to look for in a best friend:
- Trustworthy - You can share your deepest secrets and feelings with them knowing they won't betray your trust. Loyalty and discretion are important.
- Good listener - They are willing to listen without judgment when you need to talk through problems. They make you feel heard and understood.
- Fun and supportive - They enjoy spending time with you, participating in activities you both enjoy, and are there to cheer you on in both good and bad times.
- Similar values - While beliefs don't need to be identical, looking for someone who shares your core values like honesty, kindness, etc. helps ensure compatibility.
As for having friends of other
Tall Structures
Usually structure or building having height more than 80m is considered as a tall structure.
Generally tall structure may be defined as one that because of its height it is affected by lateral.
Classification: 1. Multi storeyedresidential building.
2. Multi storeyedcommercial building.
3. Tall chimneys.
4. Transmission Towers
5. Cooling towers
Prestressed Concrete
•Prestressis defined as a method of applying pre-compression to control the stresses resulting due to external loads below the neutral axis of the beam tension developed due to external load which is more than the permissible limits of the plain concrete.
Demolition
•The action or process of destroying(demolishing)the building or other structures.
•In congested area, in particular, the quality of demolition technique becomes an essential element which determines the success of revitalization of city.
•In addition to efficiency in demolition, strategies must be adopted to avoid noise, vibration and dust which affect the surrounding environment and there must be efficient disposal of waste products
This document discusses the demolition of structures. It outlines the objectives, planning steps, safety measures, and methods used for demolition. Surveys are conducted to identify hazardous materials and structural details. A demolition plan is then prepared outlining the sequence, equipment, and safety procedures. Common demolition methods include mechanical techniques like wrecking balls, hydraulic breakers, and dismantling, as well as explosives for implosions. Factors like the structure type and location influence the chosen method.
This document provides a case study for the full demolition of a 3-story commercial building located at 12, Jalan Meru in Klang, Selangor. The building needs to be demolished to make way for a new commercial building. Special precautions must be taken due to the building's concrete structure and connections to adjoining buildings. The demolition process will include relocating utility lines, erecting safety hoarding, clearing debris, and properly disposing of waste off-site.
Building services engineering, technical building services, architectural engineering, building engineering, or facilities and services planning engineering refers to the implementation of the engineering for the internal environment and environmental impact of a building.
Redo Pull-Through in Hirschsprung Disease ArticleAlexander Coe
This document discusses patients who experience recurrent obstructive symptoms after undergoing surgery (pull-through) to treat Hirschsprung's disease. Sixteen patients required reoperation due to residual aganglionosis or transition zone bowel found on histopathology. These patients presented months after their initial surgery with constipation, enterocolitis, or failure to thrive. Reoperation involved transanal resection and resolved the obstructive symptoms in all cases. The findings suggest that a full-thickness biopsy at the initial surgery may help identify residual disease and prevent the need for reoperation.
JK Advisory is an international real estate advisory firm with over 10 years of experience in investment transactions ranging from millions to hundreds of millions of Euros. They provide services for both private and institutional investors, assisting with acquisitions, disposals, and asset management. The firm's partners Jan Kovařínský and Zdeněk Špaček have collectively participated in deals worth over 1 billion Euros.
The document discusses the inspiro direct composite system, describing its simplified two-layer approach to dental restorations based on the Natural Layering Concept. It has a comprehensive range of dentin and enamel shades to mimic the natural tooth, as well as effect shades for characterization. The system uses an improved nano-hybrid composite that provides excellent mechanical properties, polishability and surface smoothness. The document promotes the system's ability to achieve uncompromised esthetic and functional results through its simplified approach.
This document summarizes diamond search results from Pricescope for 67 cushion cut diamonds between 1.0-1 carat, with a color of G, clarity of VS2, cut quality ranging from Excellent to n/a, and certified by labs including GIA and AGS. It provides the key details of carat, color, clarity, cut and symmetry ratings, and price for each diamond. It also notes that prices shown may differ depending on payment method and retailer policies.
Microsoft word new base 671 special 24 august 2015Khaled Al Awadi
Attached FYI ( NewBase Special 24 August 2015 ) , from Hawk Energy Services Dubai . Daily energy news covering the MENA area and related worldwide energy news. In todays’ issue you will find news about:-
• Strong potential for rooftop solar energy in Oman
• Morocco : San Leon Spuds Morocco Gas Well
• Norway : Songa Offshore takes delivery of its second Cat D rig Songa Endurance
• China's First LNG Mobile Power Station Comes Online
• ENN Energy Built 8 LNG Fueling Stations in China in First Half 2015
• UK: DONG Energy acquires full control of one of the world’s biggest offshore wind development zones
• Opec emergency meet may stop oil price slide
• Brent, U.S. oil mark fresh 6-1/2-year lows on China and oversupply
• Putin Hopes for Chinese Gift as Oil Slump Sours Second Gas Deal
• Mideast Stock Markets Plunge
we would appreciate your actions to send to all interested parties that you may wish. Also note that if you or your organization wish to include your own article or advert in our circulations, please send it to :-
khdmohd@hotmail.com or khdmohd@hawkenergy.net
Best Regards.
Khaled Al Awadi
Energy Consultant & NewBase Chairman - Senior Chief Editor
MS & BS Mechanical Engineering (HON), USA
Emarat member since 1990
ASME meme since 1995
Hawk Energy since 2010
The document outlines the preparation and presentation for a lesson on the InStill Life project, which has students create still life paintings of food that are turned into gift cards, with the proceeds going to lend money to farmers and food producers around the world to help them grow their businesses. The lesson introduces the project, discusses how it creates positive change globally, and has students participate in a mock Greek dining experience to learn about olives as a healthy imported food.
The document discusses how Amendment 772 in Alabama has expanded the ability of local governments to offer economic incentives to attract retail businesses. It allows incentives like rebating sales taxes generated by a new project. This benefits small retailers seeking to expand, as incentives can help bridge the gap between what tenants are willing to pay in rent and what developers need to earn a profit. An example occurred in Tuscaloosa, where incentives helped develop a new shopping center projected to create jobs and tax revenue. Overall, Amendment 772 gives local leaders more flexibility to recruit retail outlets, especially important for rural areas lacking other economic options.
While the US remains the largest economic power, its hegemony is being challenged. The US accounts for a third of global GDP but has large deficits and debt. Other countries like China are becoming more competitive and influential. The US reliance on the dollar and military spending still give it global power but its leadership role is weakening as economic growth in places like China exceeds its own. Rising powers and a more distributed global economy threaten to end sole US dominance.
The document summarizes key events in the Union's campaign to take control of the Mississippi River and defeat the Confederacy at Vicksburg in 1863. It describes Grant's troops marching to Vicksburg, the Confederate blockade at Vicksburg, the siege of Vicksburg that lasted over 40 days with continual bombardment, Grant mining Confederate works, the surrender of Vicksburg on July 4, and the last Confederate fort surrendering on July 8, opening up the Mississippi River.
This document provides an overview of preparations for the opening ceremony of Heaven's Heart Cheon Bok Gung temple. It discusses that the temple will be open all day on January 20th to allow members to offer prayers and prepare their hearts for True Parents' attendance the following day. The welcoming remarks encourage members to be blessed in 2010. The main sermon then reflects on the history and growth of the Unification movement, praising recent victories in fundraising for the new temple and outreach efforts in Korea.
U.S. Consumer Banks and the Potential of Location-Based OffersCognizant
The document discusses how location-based offers (LBOs) present an opportunity for U.S. retail banks. As mobile device usage increases and location technologies advance, LBOs are growing across industries like retail and healthcare. However, retailers lack customer spending data to make offers truly relevant. Banks have this valuable customer data from transaction histories. By partnering with retailers and using location data, banks can create highly customized LBOs that drive customer loyalty and sales for both banks and retailers. Success requires strategies that leverage mobile technologies, location data, and analytics to deliver the right offers at the right time based on a customer's unique "Code Halo" of digital data.
This document provides specifications for various types of SCARA robots in the IX series, including standard, high-speed, dustproof, wall mount, ceiling mount, inverse, and clean room models. It lists the model, rated load capacity, maximum speed, standard cycle time, arm length, and page number for each robot. The document also describes features like high speeds, loads, accuracy, programming ease, and interference checking for the IX series robots.
This document is a seminar report submitted by Mr. Sharma Prabhunath.G to the Department of Civil Engineering at Padmashri Dr. Vithalrao Vikhe Patil College of Engineering in Ahmednagar, India, in partial fulfillment of the requirements for a third year civil engineering course. The report focuses on construction equipment and is presented over multiple chapters that discuss various types of equipment used for excavation and loading, compaction and grading, drilling and blasting, lifting and erecting, mixing and paving, and other construction tools. The report provides an overview of the key equipment, their functions, and applications in construction projects. It includes acknowledgments, an index, and figures to
This document provides information on various mechanical powder handling solutions from Palamatic Process, including screw conveyors, belt conveyors, aero conveyors, vibrating conveyors and bucket elevators. It describes each solution's applications, specifications, flow rates, and technical details. The document is intended to help customers select the appropriate equipment according to their conveying needs.
We supply overhead crane,gantry crane,jib crane,crane parts,port crane,electric hoist! Our cost performance is high,the quotation and the transportation way,belive that will make you satisfied. Welcom to inquiry!
skype:
cherry.swallow
Email:
christine@ytcrane.com
Web:
http://www.ytcrane.com
The document describes the IX-1200 SCARA robot. It has an arm length of 1200 mm, the largest among the manufacturer's SCARA robots. It can transfer payloads of up to 50 kg, one of the highest in its class. The robot has a small footprint relative to its large working range of 2400 mm. It also achieves high-speed transfer through a maximum operating speed of over 8000 mm/s.
IRJET- Parametric Study of RC Deck Slab Bridge with Varying Thickness: Techni...IRJET Journal
This document summarizes a technical paper that analyzes a 3-span reinforced concrete deck slab bridge with varying thickness using Staad Pro software. The study varies the bridge span from 10m to 18m and slab thickness from 150mm to 300mm. It analyzes parameters like stresses on the deck slab and girders, node displacements, shear forces and bending moments. The results show that with increasing span and slab thickness, the principal stresses, von Mises stresses, displacements, shear forces and bending moments generally decrease, indicating improved structural performance. The paper concludes the analysis can help determine optimal bridge geometry.
Active Uni-flex Flexible Conveyor BrochureNigel Edwards
The document provides information about Uni-Xu conveyors, including:
- Uni-Xu conveyors have been integral to turnkey solutions for demanding companies across Europe for their robust design and durability.
- The modular design offers flexibility for integrated systems and it has been engineered in Britain since 1963, resulting in five decades of engineering excellence.
Active Uni-flex Flexible Conveyor BrochureKarl Edwards
The document provides information on the Uni-xu® range of flexible conveyors, which are modular and durable. They are used in demanding applications across Europe and are known for their robust design and quality. The document describes several types of flexible conveyors that Uni-xu® offers, including powered roller conveyors, gravity roller conveyors, gravity skatewheel conveyors, and Lite conveyors. It provides specifications, features, and applications for each conveyor type.
This document provides specifications for a Link Belt HC238H Series II 150-ton crane. It lists details about the crane such as the make, model, year, tonnage, and serial numbers. It also includes information on the crane's blocks, rigging diagram, rated capacities, and assembly and disassembly instructions for a 120' main boom with ABCA counterweights. The assembly process is outlined in 10 steps and the disassembly process in 17 steps. Landwehr Construction is listed at the top as one of the companies involved in the crane specification.
Caterpillar cat d9 r track type tractor (prefix wdm) service repair manual (w...fjkskmmdmme
This document provides instructions for removing, disassembling, assembling, and installing track rollers on a D9R track-type tractor. The removal process requires loosening the track, installing straps to hold bogies in position, lifting the tractor, and using a hoist and bracket to remove the roller. Disassembly requires removing seals, rings, and the shaft. Assembly requires cleaning, installing seals and rings in the correct order, checking measurements, and pressure testing. Installation places the roller back in the bogie using a hoist and bracket and tightening bolts to the specified torques.
Caterpillar cat d9 r track type tractor (prefix wdm) service repair manual (w...fiskkdmdmdm
This document provides instructions for removing, disassembling, assembling, and installing track rollers on a D9R track-type tractor. The removal process involves loosening the track, installing straps to hold bogies in position, lifting the tractor, and using a hoist and bracket to remove the roller. Disassembly requires removing seals, rings, and the shaft. Assembly requires cleaning, installing seals and rings in the correct order, checking measurements, and pressure testing. Installation uses a hoist and bracket to position the roller between bogies and tighten bolts to the specified torques.
Caterpillar cat d9 r track type tractor (prefix wdm) service repair manual (w...fjjskkefksme
This document provides instructions for removing and disassembling a track roller from a D9R track-type tractor, as well as assembling a track roller. Key steps include:
- Using tools to lift and remove the track roller from the tractor.
- Marking and removing seals, rings, and other components from the roller shaft.
- Cleaning and inspecting parts for wear before reassembly.
- Assembling components like seals and rings onto the shaft using special tools to ensure proper placement and alignment.
- Testing the assembled roller for leaks using air pressure before use.
This document discusses various types of construction equipment used in civil engineering projects. It categorizes equipment into earth moving equipment, hauling equipment, hoisting equipment, conveying equipment, concrete production equipment, and tunneling equipment. Specific equipment described include power shovels, backhoes, draglines, clamshells, trenchers, scrapers, bulldozers, dump trucks, hoists, conveyor belts, and tunnel boring machines. The document emphasizes that proper use of this specialized equipment can contribute to economy, quality, safety, speed and timely completion of construction projects.
IRJET- Design, Analyasis and Optimization of Jib Crane BoomIRJET Journal
This document summarizes a study on the design, analysis and optimization of a jib crane boom. The study aims to reduce stresses on the jib crane boom by changing the web section of the I-beam. Various web section designs are modeled and analyzed using finite element analysis software ANSYS. Experimental testing is also conducted on a scaled down physical model to validate the simulation results. The analysis shows that a rectangular web section design experiences the lowest stresses of 150.484 MPa and deformation of 7.81 mm, providing a 23% reduction in stress and 5% reduction in deformation compared to the original design. Experimental testing of the optimized design shows 7.7 mm deformation, which is close to the simulation result, with
IRJET- An Analytical Study on Application of Virtual Outrigger in Tall Bu...IRJET Journal
This document analyzes the use of virtual outriggers in an 80-story building to reduce lateral displacement and drift under seismic loads. A building model was created and conventional outriggers were added at different heights to determine the optimum positions. Virtual outriggers were then modeled which connect the core to the belt truss through rigid floor slabs instead of physical beams. Response spectrum analysis showed virtual outriggers reduced maximum displacement by 31% and drift by 34% compared to the bare frame. Different belt truss configurations were also analyzed, with X-bracing found to be most effective. Virtual outriggers were found to help resist progressive collapse by distributing gravity loads.
Sh RK Saxena 25. 11.2022 MOBILE BRIDGE INSPECTION UNIT.pptxChunaramChoudhary1
Mobile bridge inspection units come in two types - cage type and platform type - and are used to inspect bridges that cannot be reached through normal means. A platform type unit operates using hydraulics and consists of a truck with a lifting tower, rotating frame, telescopic platform and lift arrangement to access all areas of the bridge safely. It can inspect bridges up to 12 meters wide while staying within weight limits. Precautions like following manuals and prioritizing safety are important when using these units.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix rjm) service ...kfdjkskdmm
This document provides instructions for removing and installing track roller frames on a Caterpillar D8R track-type tractor. It outlines the required tools and safety precautions. The removal procedure involves separating the track, raising the machine with lift stands, installing a strap on the front bogie, and removing bolts to separate the front track roller frame. Instructions are provided for draining oil from the rear frame as well.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix rjm) service ...fujskefksmem
This document provides instructions for removing and installing track roller frames on a Caterpillar D8R track-type tractor. It outlines the required tools and safety precautions. The removal procedure involves separating the track, raising the machine with lift stands, installing a strap on the front bogie, and removing bolts to separate the front track roller frame. Instructions are provided for draining oil from the rear frame as well.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix rjm) service ...udfujjsejkkem
This document provides instructions for removing and installing track roller frames on a Caterpillar D8R track-type tractor. It outlines the required tools and safety precautions. The removal procedure involves separating the track, raising the machine with lift stands, installing a strap on the front bogie, and draining oil from the rear frame before removing bolts and disassembling the roller frame. Reinstallation is done in reverse order.
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Navigating the world of forex trading can be challenging, especially for beginners. To help you make an informed decision, we have comprehensively compared the best forex brokers in India for 2024. This article, reviewed by Top Forex Brokers Review, will cover featured award winners, the best forex brokers, featured offers, the best copy trading platforms, the best forex brokers for beginners, the best MetaTrader brokers, and recently updated reviews. We will focus on FP Markets, Black Bull, EightCap, IC Markets, and Octa.
3 Simple Steps To Buy Verified Payoneer Account In 2024SEOSMMEARTH
Buy Verified Payoneer Account: Quick and Secure Way to Receive Payments
Buy Verified Payoneer Account With 100% secure documents, [ USA, UK, CA ]. Are you looking for a reliable and safe way to receive payments online? Then you need buy verified Payoneer account ! Payoneer is a global payment platform that allows businesses and individuals to send and receive money in over 200 countries.
If You Want To More Information just Contact Now:
Skype: SEOSMMEARTH
Telegram: @seosmmearth
Gmail: seosmmearth@gmail.com
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Easily Verify Compliance and Security with Binance KYCAny kyc Account
Use our simple KYC verification guide to make sure your Binance account is safe and compliant. Discover the fundamentals, appreciate the significance of KYC, and trade on one of the biggest cryptocurrency exchanges with confidence.
How MJ Global Leads the Packaging Industry.pdfMJ Global
MJ Global's success in staying ahead of the curve in the packaging industry is a testament to its dedication to innovation, sustainability, and customer-centricity. By embracing technological advancements, leading in eco-friendly solutions, collaborating with industry leaders, and adapting to evolving consumer preferences, MJ Global continues to set new standards in the packaging sector.
Structural Design Process: Step-by-Step Guide for BuildingsChandresh Chudasama
The structural design process is explained: Follow our step-by-step guide to understand building design intricacies and ensure structural integrity. Learn how to build wonderful buildings with the help of our detailed information. Learn how to create structures with durability and reliability and also gain insights on ways of managing structures.
Taurus Zodiac Sign: Unveiling the Traits, Dates, and Horoscope Insights of th...my Pandit
Dive into the steadfast world of the Taurus Zodiac Sign. Discover the grounded, stable, and logical nature of Taurus individuals, and explore their key personality traits, important dates, and horoscope insights. Learn how the determination and patience of the Taurus sign make them the rock-steady achievers and anchors of the zodiac.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Matka Result Satta Matka Guessing Satta Fix jodi Kalyan Final ank Satta Matka Dpbos Final ank Satta Matta Matka 143 Kalyan Matka Guessing Final Matka Final ank Today Matka 420 Satta Batta Satta 143 Kalyan Chart Main Bazar Chart vip Matka Guessing Dpboss 143 Guessing Kalyan night
How to Implement a Strategy: Transform Your Strategy with BSC Designer's Comp...Aleksey Savkin
The Strategy Implementation System offers a structured approach to translating stakeholder needs into actionable strategies using high-level and low-level scorecards. It involves stakeholder analysis, strategy decomposition, adoption of strategic frameworks like Balanced Scorecard or OKR, and alignment of goals, initiatives, and KPIs.
Key Components:
- Stakeholder Analysis
- Strategy Decomposition
- Adoption of Business Frameworks
- Goal Setting
- Initiatives and Action Plans
- KPIs and Performance Metrics
- Learning and Adaptation
- Alignment and Cascading of Scorecards
Benefits:
- Systematic strategy formulation and execution.
- Framework flexibility and automation.
- Enhanced alignment and strategic focus across the organization.
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This PowerPoint compilation offers a comprehensive overview of 20 leading innovation management frameworks and methodologies, selected for their broad applicability across various industries and organizational contexts. These frameworks are valuable resources for a wide range of users, including business professionals, educators, and consultants.
Each framework is presented with visually engaging diagrams and templates, ensuring the content is both informative and appealing. While this compilation is thorough, please note that the slides are intended as supplementary resources and may not be sufficient for standalone instructional purposes.
This compilation is ideal for anyone looking to enhance their understanding of innovation management and drive meaningful change within their organization. Whether you aim to improve product development processes, enhance customer experiences, or drive digital transformation, these frameworks offer valuable insights and tools to help you achieve your goals.
INCLUDED FRAMEWORKS/MODELS:
1. Stanford’s Design Thinking
2. IDEO’s Human-Centered Design
3. Strategyzer’s Business Model Innovation
4. Lean Startup Methodology
5. Agile Innovation Framework
6. Doblin’s Ten Types of Innovation
7. McKinsey’s Three Horizons of Growth
8. Customer Journey Map
9. Christensen’s Disruptive Innovation Theory
10. Blue Ocean Strategy
11. Strategyn’s Jobs-To-Be-Done (JTBD) Framework with Job Map
12. Design Sprint Framework
13. The Double Diamond
14. Lean Six Sigma DMAIC
15. TRIZ Problem-Solving Framework
16. Edward de Bono’s Six Thinking Hats
17. Stage-Gate Model
18. Toyota’s Six Steps of Kaizen
19. Microsoft’s Digital Transformation Framework
20. Design for Six Sigma (DFSS)
To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations
HOW TO START UP A COMPANY A STEP-BY-STEP GUIDE.pdf46adnanshahzad
How to Start Up a Company: A Step-by-Step Guide Starting a company is an exciting adventure that combines creativity, strategy, and hard work. It can seem overwhelming at first, but with the right guidance, anyone can transform a great idea into a successful business. Let's dive into how to start up a company, from the initial spark of an idea to securing funding and launching your startup.
Introduction
Have you ever dreamed of turning your innovative idea into a thriving business? Starting a company involves numerous steps and decisions, but don't worry—we're here to help. Whether you're exploring how to start a startup company or wondering how to start up a small business, this guide will walk you through the process, step by step.
Discover timeless style with the 2022 Vintage Roman Numerals Men's Ring. Crafted from premium stainless steel, this 6mm wide ring embodies elegance and durability. Perfect as a gift, it seamlessly blends classic Roman numeral detailing with modern sophistication, making it an ideal accessory for any occasion.
https://rb.gy/usj1a2
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
1. ®
tirfor
lifting and pulling machines
with unlimited wire rope
2. TIRFOR. . . lift, pull, lower and position
Fig. 1 - TIRFOR TU standard range Fig. 2 - TIRFOR T-500 light duty range
POWERFUL: TIRFOR TU machines are in daily operation CHOICE: Smaller and lighter, the TIRFOR T-500 machines
on construction sites around the world putting power are even easier to handle, whilst still giving a high mecha-
where it is needed for lifting, pulling and handling a wide nical advantage and complete operating safety.
variety of loads. Only the TU models are approved for
man-riding. (Please refer to your local safety regulations).
The TU and T-500 ranges of versatile TIRFOR lifting and pulling machines are safe, reliable and efficient.
Suitable for many applications, TIRFOR machines are lever operated hoists using a separate wire rope. One-man
operated, using a telescopic operating handle, they can work in any position and over any height of lift. They can
replace conventional winches and other hoists for many applications.
The TIRFOR principle
The principle may be described as "hand-to-hand", like a
sailor pulling on a rope. While one hand pulls the other
changes position to pull in turn. The two hands represent the
2 jaws of the TIRFOR. They grip the wire rope without dama-
ging it, and alternately pull it during forward operation and
hold it during reverse operation. The effort is transfered to the
jaws by two levers: one for forward operation and the other for
reverse operation. The load is held securely at all times.
TIRFOR wire rope
The wire rope for the TIRFOR
machine is not a standard
production rope; it has been
developed specially to suit
the TIRFOR machine.
TIRFOR wire ropes are
supplied on a reeler for ease
of transport and storage.
Fig. 3 - Standard 20 m wire rope
on reeler Fig. 4
3. in complete safety. . .
the main advantages Fig. 5
. . .operates in every direction
of the TIRFOR
multiple operation pull
- works in any position lift
horizontal, vertical or angled
- unlimited length of wire rope
- increase the nominal capacity with
multiple sheave blocks
simple tension
- fast and easy installation
- simple to feed in
or remove the wire rope
- continuous operation without snatching
- reduced maintenance by simple
cleaning and regular lubrication
- changeover from forward to reverse
operation by transfering the operating
handle from one lever to another
robust . . . . to the nearest millimeter
- high mechanical advantage
- both ranges will operate in the most
difficult conditions Fig. 6
safe and reliable
- whether lifting or lowering, the load is
permanently controlled with the utmost
precision; when operation stops,
the load is spread between the two
jaw blocks
- safety device to prevent overloading
- TU range approved for man-riding
applications
the original TIRFOR. . .
even better than ever Fig. 7
4. The TIRFOR, the right tool for the job.
Here is a selection of the many applications.
Construction, public works, civil engineering
- moving and positioning formwork horizontally
or vertically (Fig. 9)
- positioning sections of precast concrete beams
- lifting work platforms or suspended working platforms
- dragging, general lifting, guying, tensioning, etc. . .
Pipelaying and jointing
- positioning of pipes for welding and jointing
- laying concrete pipes and pulling them together
- underwater pipeline assembly
Bridges
- positioning formwork (Fig. 16)
- guying (Fig. 8)
- pulling pre-cast concrete beams
Fig. 8 - suspending inspection and maintenance platforms
Steel structures
- plumbing or aligning steel structures (Fig. 7)
- erecting steel silos
Industry
- installation and removal of machine tools
and presses (Fig. 10)
- loading and unloading of heavy equipment
- lifting and pulling during maintenance operations
Escalators, elevators
- loading, unloading and rigging of prefabricated
escalators (Fig. 27)
- lifting and positioning the cabins and
drawing mechanisms
Electricity and telecommunications
- positioning transformers (Fig. 15)
- erection of mobile aerials and antennas (Fig. 25)
- tensioning underground and overhead cables
- guying operations
. . . and wherever there is a need
Fig. 9
for lifting, or pulling heavy loads
Fig. 10 Fig. 11
5. The TIRFOR, the right tool for the job.
Here is a selection of the many applications.
Oil and chemical industries
- controlled positioning and assembly of pipes and ducting
(See front cover)
- guying silos and tanks during construction
- inspection and maintenance work
Mines and quarries
- handling and positioning equipment and underground
machinery
- tensioning conveyors
Shipbuilding and marine engineering
- centering ships in dry dock (Fig. 13)
- anchoring barges and pushers
Rail and road transport
- lifting and removal of pylons and signals (Fig. 11)
- maintenance and tensioning of catenaries
- load binding heavy and difficult loads
- loading and unloading
- de-bogging equipment Fig. 13
Armed forces
- many applications in the different sections of the Armed
Forces (Engineering, Air Force, Artillery, Navy and Marines,
signals and transportation)
Fire services and civil defence
- removing crash wreckage (Fig. 14)
- handling and siting of emergency bridges
Agriculture
- controlling the direction of fall of a tree (Fig. 12)
- clearing trees and fences
- debogging lorries, tractors and all mobile equipment
- tensioning fences
. . . and wherever there is a need Fig. 14
for lifting, or pulling heavy loads
Fig. 12 Fig. 15
6. Technical specification
nominal weight (kg) dimensions (mm) special TIRFOR w. r.
model capacity machine w. r. machine handle dia. break. strain
daN/kg 20 m ext./closed mm kg
standard
range 528 x 730
TU-8 800 8.4 7 284 x 450 8.3 4800
113
660 x 1147
TU-16 1600 20 12.5 360 x 648 11.5 9600
145
685 x 1147
TU-32 3200 27 26 365 x 648 16.3 19200
156
light-duty
range 420 x 690
T-508 800 6.6 7 250 x 405 8.3 4800
99
530 x 1147
T-516 1600 13.5 12.5 315 x 648 11.5 9600
127
631 x 1147
T-532 3200 24 26 357 x 648 16.3 19200
148
Increase the capacity of the TIRFOR
Fig. 17
1
The lifting and pulling power of TIRFOR machines can be greatly increased by 1
1
the use of multiple sheave blocks. These can increase the nominal capacity of
the TIRFOR machine by 2, 3 or 4 times or more (see diagram opposite). 1 1
2 2
For most applications, an allowance must be made for friction in the sheaves.
Ensure that the capacity of the blocks and fittings and anchor points are suitable 1 1
for the load. When using the TIRFOR for pulling purposes it should be 2
1
1
2
3
remembered that the necessary pulling effort is not equal to the weight of the
load to be moved.
2 2 2 2
1 1 1 1 1 1 1 1 1
1 1 1
2 3
1
2
1 1
1 1 1 1 1 1
1
2 1
2 1 2
1
Fig. 16
7. Accessories
To make the best use of the TIRFOR machine,
choose from the range of specially developed
accessories.
Fig. 19
Sheave blocks
to increase the capacity of TIRFOR machines in
Fig. 18 complete safety as described on the previous page.
The following standard blocks are available:
- single side opening snatch block (Fig. 19)
- single snatch block, non-opening
- double blocks (Fig. 18)
- lightweight opening blocks
CONI-KLAM, wire rope gripper (Fig. 20)
to quickly lengthen a wire rope or sling. The wire rope is
held by a pair of serrated jaws, operated by a self-
gripping wedge
Fig. 20 suitable for wire rope
type max. load (kg) dia. (mm)
EC 10 1000 5 - 10
EC 14 2000 10.5 - 14
EC 21 3000 15 - 21
Slings (Fig. 21)
for anchoring the TIRFOR or the load.
Manufactured in steel wire rope. The diagram shows
Fig. 21 the standard types, which are available in the length
required.
Any other type on request.
Ground anchor with spikes (Fig. 22)
to provide a fixed anchor point in the ground
or even in sand.
Ground anchor with disc (Fig. 23)
in galvanised steel, to provide strong and effective
anchor points.
Anchor hooks (Fig. 24)
for TIRFOR model TU-32 and all the models of the
T-500 range.
Fig. 22
Fig. 23
Fig. 24 Fig. 25
8. Powered TIRFOR. . . a winning hand!
The powered models of the TIRFOR machines
Fig. 26 - TIRFOR TU-16H
complement the manual units for heavy loads, such with hydraulic power pack
as operating large work platforms, lifting shuttering,
moving machinery, etc. . .
Depending on the application, the working conditions
and the power available, powered operation can be
electro-hydraulic or pneumatic.
- saves time and labour
- no operator fatigue
- continuous operation
- increased safety
Hydraulic TIRFOR
The TIRFOR hydraulic system includes a hydraulic
power pack which allows remote operation (individually
or simultaneously) of one, two or four machines: TIRFOR
TU-16H (1600 kg) or TU-32H (3200 kg), each fitted with
a self reciprocating hydraulic ram.
Pneumatic TIRFOR
This machine (model TU-32P) is particularly suitable for
operating on construction sites and in industries where
there is a danger of explosions or in industries already
provided with compressed air facilities.
For additional information, please ask for descriptive documentation
on motorised TIRFOR.
Fig. 27 - Installation of mechanical escalator (TU-16H)
TIRAK
the fast powered winch
As with the TIRFOR machine, the TIRAK also operates
on a wire rope which passes through the mechanism.
The originality and dependability of its wire rope drive
mechanism make it a powered mobile winch which can
replace conventional winches in a large number of
applications.
Mounted in a frame with its wire rope reeler, the TIRAK
assembly is very compact and easily moved from site
to site.
The TIRAK has been approved as a man-riding hoist by
safety organisations in the majority of industrialised
countries.
For additional information, please ask for the descriptive Fig. 28 - TIRAK mobile winch with wire rope reeler
documentation on TIRAK. mounted in a compact frame.
P526.4E-9000-11/90
TRACTEL S.A. SECALT S.A.
29, rue du Progrès 3, rue du Fort Dumoulin
F-93108 Montreuil Cedex B.P. 1113 • L-1011 Luxembourg
Tél. (01) 48 58 91 32 Tél. (352) 43 42 42-1
Fax (01) 48 58 19 95 Fax (352) 43 42 42-200
10. Fig. 3 - Installation of a mechanical escalator (TU-16H). The nominal
capacity is increased by using multiple sheave blocks.
Power-operated TlRFOR machines are based on the As with hand operated T I R F O R machines, the
manual TIRFOR but with specially strengthened levers, power-operated models have all the same benefits:
cranks, spindles and jaw blocks, as well as a special - unlimited length wire rope
power-operated self-reciprocating ram, which works the - operate in any position
TIRFOR machine (pulling, lifting, lowering etc) without - fast and easy installation
any effort by the operator. - high lever of safety and reliable operation
Depending on the application, the working conditions
and the power available, power operation can be hydraulic . . . to these can be added the specific advantages of
or pneumatic. power operation:
As a result of its increased specification, the power-
operated TIRFOR machine is recognised by many - no operator fatigue
companies as an essentiel tool for certain modern - fewer operators required since one man can
construction techniques (climbing shuttering, work
control several machines
platforms) and for installation work (lifts and goods
- saves time, because work is continuous
hoists, mechanical escalators, etc).
- increased safety since operation can be controlled
Fig. 2- Operation of self climbing shuttering, PERI system (TU-32H). at a distance, and shear pins prevent overloading
- increased precision of operation through the control
system
Motorised TIRFOR machines are approved for lifting
personnel in the main industrialised countries.
Fig. 4 - Operation of suspended platforms for the inspection and
maintenance of bridges (TU-32H).
11. TIRFOR TU-32H
3200 kg
4
5
3 4
2
TU-16H
1 1600 kg
6 1 2 3
1. Anchor point
2. Forward operating lever
Fig. 5 - Operating of heavy work platforms.
3. Reverse operating lever
4. Hydraulic ram
Hydraulic TIRFOR
5. Hydraulic hoses
The TIRFOR hydraulic system includes a hydraulic power (to connect
pack which allows remote operation (individually or simul- TIRFOR machine
taneously) of one, two or four machines: TlRFOR TU-16H to power pack)
(1600 kg) or TU-32H (3200 kg), each fitted with a self reci- 6. Wire rope
procating hydraulic ram.
The hydraulic power pack is fitted with an electric motor or petrol
engine. It is also possible to utilise the hydraulic power take-off
from a lorry, tractor or other existing power source. The speed of
operation is controlled using a variable flow control valve.
Power pack
Of course, it is always possible to operate the Tl RFOR machine
by hand using the telescopic operating lever, eg. in case of a
power failure.
1 x 1600 kg
ou
TU-16H TU-32H
1 x 3200 kg
Nominal capacity kg 1600 3200
(increase of power by multiple sheave blocks)
Max. speed forward operating (lifting) m/mn 2 0.7
Max. speed rev. operating (lowering) m/mn 2.65 1.60
WEIGHT: TIRFOR machine with ram kg 29 52 2 x 1600 kg
hydr. power pack (with oil), elec. mot. kg 53 ou
as above, but with petrol engine kg 51 2 x 3200 kg
TIRFOR wire rope, diameter mm 11,5 16,3 4 x 1600 kg
standard lenght m 20 20 ou
4 x 3200 kg
(other lenghts available on request)
Pneumatic TIRFOR
sites and industries where there is a danger of explosions eg. oil
The pneumatic TlRFOR machine (model TU-32P) is operated by refineries, chemical industries etc. or in industries which are
a self reciprocating pneumatic ram, supplied by compressed air. already provided with compressed air facilities (power stations,
The TU-32P is particularly suitable for operating on construction shipyards, etc.).
TU -32P TIRFOR TU-32P
3200 kg
Nominal capacity kg 3200
(increase of power by multiple sheave blocks)
Speed in forward operation (lifting) m/mn 0,60 - 0,94
Max. speed rev. operation (lowering) m/mn 1,80
Operating pressure bar 4 - 7,5
Flow l/mn 500- 700
Weight (overall) kg 88
TIRFOR wire rope
diameter mm 16,3
standard lenght m 20
(other lenghts available on request)
For additional technical information please see product information T-366 and T-337
12. 7 11 14
8 Power-operated T I R F O R machines 15
. . . for moving heavy loads
7. Operation of self climbing
shuttering (the Biemont system ).
8. Lifting and installation of
pre-assembled roofing structure at
ground level.
9. 72 m suspended platforms fitted
with 16 Tl R FOR TU-1 6H mach ines.
10. Pre-stressed p latform ( Freyssinet
system), fitted with TU-32H machines.
11. Demolition work. The pulling effort
is checked by means of DYNAFOR
load indicating devices.
9 12. Moving heavy machinery. 16
13. Moving grandstand seating in an
indoor arena.
14. Fitting and removal of a sluice gate.
15. Pulling prefabricated sections of a
bridge into position.
16. Assembling drainage pipes. Air
operated TIRFOR machine TU-32P.
17. TU-32H machine as an emergency
pulling unit on a fire engine.
18. Lifting an inflatable cover over the Nîmes
amphitheatre with 32 TU-32H machines.
10 12 17
13 18
P2036GB-6000-05/97
TRACTEL S.A. SECALT S.A.
29, rue du Progrès 3, rue du Fort Dumoulin
F-93108 Montreuil Cedex B.P. 1113 • L-1011 Luxembourg
Tél. (01) 48 58 91 32 Tél. (352) 43 42 42-1
Fax (01) 48 58 19 95 Fax (352) 43 42 42-200
13. ®
jockey
winch-hoist with unlimited wire rope
TRACTEL S.A. SECALT S.A.
29, rue du Progrès 3, rue du Fort Dumoulin
F-93108 Montreuil Cedex B.P. 1113 • L-1011 Luxembourg
Tél. (01) 48 58 91 32 Tél. (352) 43 42 42-1
Fax (01) 48 58 19 95 Fax (352) 43 42 42-200
19. ®
tirak
mobile winch
with unlimited length of wire rope
Telecom Tower,
Kuala Lumpur/ Malaysia.
Lifting and positioning of
16 decorative panels
(each weighing 4 tons)
by motorised TIRAK
machines.
Lifting height 280 m.
X-3000
the new TIRAK® 3000 kg
20. TIRAK®
for lifting and pulling
with an unlimited length
of wire rope
The TIRAK® is a powered winch using wire rope
with unlimited length of pull or height of lift. TIRAK T-1000
The design of the conveying mechanism, passing
the rope through the TIRAK ® without storing it,
allows unlimited length. For ease of operation and
storage certain TIRAK® models come with a wire
rope reeler mounted within a frame.
Compared to its capacity (up to 3000 kg), the TIRAK®
is very easy to handle and extremely compact, and
may be simply moved from site to site.
With its reliable design, the TIRAK® is a particularly
safe machine.
The TIRAK® is suitable as a hoist for building and
construction sites, as a materials hoist, for opera-
ting conveyors, for opening and closing hangar
doors, for moving theatrical scenery, for moving
goods waggons, for pulling underground cables, …
The TIRAK® is also well suited to many lifting and
pulling applications in factories and a variety of
inspection and maintenance applications.
For lifting operations,
the TIRAK® may be mounted
above the load.
Another way is to anchor the
winch to the ground (especially
for low heights of lift). This is
the most common method and
the one most recommended.
The TIRAK® may even be
anchored to the load itself;
in this case it climbs up the wire
rope with the load.
The most usual method for
pulling is to anchor the TIRAK®
at the point to which you want
to pull the load.
If required it is also possible, for lifting as well as pulling applications, to increase the capacity of the
TIRAK® hoist by using multiple sheave blocks.
21. the
compact frame: compact frame
with TIRAK® X-500
the really and
wire rope reeler
for 80 m
practical solution of wire rope
The TIRAK 1x
mobile winch
automatically
turns in the
direction of pull.
Unlike a
conventional drum
winch, the direction To lift:
of line pull is always the 1x anchor the TIRAK mobile
To anchor the frame: simply attach the same because of the fixed rope position winch to a suitable point
TIRAK mobile winch to a suitable anchor design of the TIRAK. Moreover, with the and pass the wire rope
point using a rope sling, chain or similar TIRAK mobile winch, the capacity and around one or more return
attachment. speed remain constant at all times. pulleys.
1x
If the pull is through
an opening in the wall 2x
or ceiling capable of If the hole is not big enough for the rope
taking the load, simply hook to pass through, position the TIRAK If the effective power is not enough,
1x site the winch by or mobile winch and pass the wire rope increase the capacity using a set of
above the hole. through the hole and then into the TIRAK. multiple sheave blocks.
Compact frame with TIRAK T-1000 and wire
Unfolding a staircase used during a theatrical rope reelers used for operating working Compact frame
performance carrying about 60 people. platforms suspended inside the lift shafts. with hydraulic TIRAK and wire rope reeler
Municipal Theatre, D-Hagen. Thyssen-Aufzüge, D-Stuttgart-Neuhausen. for pulling jet aircafts into shelters.
23. minifor ®
portable electric hoists
with unlimited height of lift
q easy to handle
q powerful
q robust
minifor
100 to 500 kg range
24. minifor® TR 10 - TR 30
With its simple and efficient design the minifor
range makes it easy for you to choose the right
hoist for your applications.
These two versions give you :
s unlimited length of hoist cable, adapted to the
requirement
s light, easy to handle aluminium alloy design
s integral handle for easy carrying
s suitable for building sites, fast setup
s efficient operation with swivelling suspension hook
s extremely good weight/power ratio
s reduced maintenance
s quiet operation (70 dB)
s operational safety :
q upper and lower limit switches
q brake motor
q pendant control with emergency stop
q CE socket
Conform to European directive no. 89/392 - 91/368 - 93/44 -
93/68 - 89/336 and to standards EN 50 081-2 and 50 082-2.
Options :
q Spring cable reel, capacity 20 m and 40 m
q 9m/min 3-phase version, 48 VAC control, 0.55 kW motor
(TR30 only) - diagram n°1
q Special motors
q Long power supply and remote control cables
q Pulley block kit - diagram n°2
q Self-locking hook
q Radio remote control with «lift/lower» function
Model unit TR 10 TR 30
Hoisting capacity kg 100 300
Hoisting speed m/min 15 5 single ph. 113 65 65 30
355
9 - 3 phase Ø20
115
Weight of hoist kg 20 20.2
15
74
Dimensions mm 355x420x180Cable diameter
Ø10
mm 5
35
88
Cable weight (per m) kg 0.105 14
30
Motor power Ø30
single phase kW 0.37
295
3-phase kW 0.55
755 minimum
Cable breaking load kg 1500
factor 5
Power supply single 115 V - 50 & 60 Hz - 230 - 50 Hz
3-phase 230- 400 V - 50 Hz
115
210
Operating factor % 40
Double insulated
control pendant IP 65 - 3 controls
145
165
Degree of protection IP 55
Current with A 7.5 at 115 V - 50 Hz single phase
brake motor 9 at 115 V - 60 Hz single phase Ø15
4 at 230 V - 50 Hz single phase
1.8 at 400 V - 50 Hz 3-phase 1- Direct traction 2- Double tackle pulley block
25. minifor® TR 30S - TR 50
Have been designed to be compatible with the new techniques for high level building sites, to provide
you with the best service :
q integral handle for easy carrying
q unlimited length of hoist cable, adapted to the
requirement
q suitable for building sites, fast setup
q efficient operation with swivelling suspension
hook
q extremely good weight/power ratio
q reduced maintenance
operational safety :
q upper and lower limit switches
q brake motor
q pendant control with emergency stop
q CE socket
Conform to European directive no. 89/392 - 91/368 - 93/44 - 93/68 -
89/336 and to standards EN 50 081-2 and 50 082-2.
Options :
q Metal storage case
Model unit TR 30S TR 50 «France Stade» building site
Hoisting capacity kg 300 500
180
Hoisting speed m/min 13 7
26 85
Weight of hoist kg 31.6 31.6 20
20
Dimensions of hoist mm 427x200x412
Cable diameter mm 6.5
Cable weight (per m) kg 0.170
392
412
Motor power
310
single phase kW 1.1
3-phase kW 1.1
706
Cable breaking load kg 2500
factor 5
Power supply single 115 V - 50 & 60 Hz - 230 - 50 Hz
3-phase 230-400 V - 50 Hz
Operating factor % 40
Double insulated
control pendant IP 65 - 3 controls
128 147
20
Degree of protection IP 55 65 120
Current with A 18 at 115 V - 50 Hz single phase 275 185
brake motor 20 at 115 V- 60 Hz single phase
9 at 230 V - 50 Hz single phase 427 200
3.4 at 400 V - 50 Hz 3-phase
26. beltrac electric belt hoists
Innovation with unrivalled advantages.
ew f or 97
N
Model unit Beltrac
Hoisting capacity kg 300 600
Hoisting speed m/mn 12 6
Weight of hoist kg 42 single phase
37.5 3-phase
Dimensions of hoist mm 640x260x435
Belt size mm 30x3
Motor power
single phase kW 1.1
3-phase kW 1.1
Belt breaking load kg 3500
Power supply
single / 3-phase 230-400 V - 50 Hz
% 40
Operating factor 30 starts / hour
Double insulated
control pendant IP 65 - 3 controls
Degree of protection IP 55
Current with A 9 at 230 V - 50 Hz single phase
brake motor 5.9/3.4 at 230/400 V 3-phase
TRACTEL S.A. SECALT S.A.
29, rue du Progrès 3, rue du Fort Dumoulin
F-93108 Montreuil Cedex Boîte postale 1113
Tél. 01.48.58.91.32 L-1011 Luxembourg
Fax 01.48.58.19.95 Tél. 43.42.42-1 - Fax 43.42.14-200.