Universal joints provide a simple and economic method of connecting shafts whose axes are at an angle. They avoid the need for precise alignment, thereby reducing assembly costs. Universal joints are frequently used in agricultural, textile, and machine tool applications like multi-spindle drilling machines and lathes.

1. UNIVERSAL JOINTS Horizontal Metal Cutting Bandsaw Machine
Universal joints provides simple and economic method of connecting (Dia. 200mm)
to shafts whose axis are inclined at an angle. They are also used
when the angle varies during rotation eliminating the need for the
complicated and expensive. mechanism usually associated with this
type of application. For both intermittent and continuosly rated joints
where constant lubrication (such as oil bath) is not available, joint
covered with once grease packed will take care of lubrication bearing
etc. The use of universal joints avoids the necessity for pricise
alignment there by considerably reducing assembly costs. Universal
are frequently used in an agricultural textile, multi spindle drilling
machine, VTL Lathe, S.P.M. Etc.
Strip Type
Technical Dia. 200 mm Dia. 250 mm Dia. 300 mm
Ball Type
Pin Type Featurers
Electric Motor 1H.P., 3 Phase 1H.P., 3 Phase 2H.P., 3 Phase
Coolant Pump 1/8 H.P., 3 Phase 1/8 H.P., 3 Phase 1/8 H.P., 3 Phase
Machine Size 1320 mm 1520 mm 1900 mm
Weight 320 kgs. 370 kgs. 510 kgs.
Cutting Range Maximum Bar dia. 200mm Maximum Bar dia. 250mm Maximum Bar dia. 300mm
Maximum Flat 200mm x 180mm Maximum Flat 250mm x 230mm Maximum Flat 300mm x 280mm
Blade Length Bi-Metallic 27x0.9x3 mtr. Bi-Metallic 27x0.9x3330mm Bi-Metallic 34x1.2x3470 mm
United Product Developers
United Product Developers
S. No. 15/4, Mauli Industrial Estate, Gulve Vasti, Bhosari - 411 026. Cell : 9270951009/9028577975/9764886796,
Mfg. Polygon Turning Attachment Universal Joints,
Email ; unitedpd999@gmail.com
Rubber & Plastic Dies, Jigs & Fixtures, Bandsaw Machine
S. No. 15/4, Mauli Industrial Estate, Gulve Vasti, Bhosari - 411 026. Cell : 9270951009/9028577975/9764886796,
Email ; unitedpd999@gmail.com Website : www.unitedpolygonturning.com
Website : www.unitedpolygonturning.com
Mfg. Polygon Turning Attachment Universal Joints, Rubber & Plastice Dies, Jigs & Fixtures, Bandsaw Machine

2. Blade But Welding Machine
Polygon Turning Attachment
FUNCTION
This attachment can be mounted on cross slide of Center Lathe or
table of Milling machine; & any nos of flats on outside diameter either
straight or taper can be Turned.(As shone TABLE : 1)Similarly slots
on face are cut in one stroke without indexing E.G, Two, Three, Four,
Five, Six, Seven, Eight, Ten, Twelve etc.
ADVANTAGES
Can operates by any manual machine operator.
Easy to Operate
No required Skilled operator
Extremely Short piece time
Std. ISO inserts to be used to avoiding costly side & face cutters
Saving on cost of Components
No Maintenance
ATTACHMENT MOUNTING
PTA 25/40 : Can be mounted on any light duty old / new 4.5 Ft. Center lathe
PTA 80 : Can be mounted on any medium duty old / new 5 Ft. Center lathe
Technical Featurers STANDARD ACCESSARIES : EXTRA ACCESSARIES :
Polygon Turning attachment (Standard side - 2,4,6,8,10,12), Lever Operated quick change collect chuck A-25
Cutter with 6 spockets , 125 true chuck. Lever Operated quick change collect chuck C-40
Capacity : Blade 25 mm to 40 mm width x 1.5 mm thick GENERAL TECHNICAL SPECIFICATION OF POLYGON TURNING ATTACHMENT
Features Description Model of Polygon Turning Attachment Category
Electricity : 440 V - 2 Phase - 15 KVA Capacity PTA 25 / 40 PTA 80 Standard
Workpiece Diameter 40 mm 120 mm Standard
Size : 660 mm length x 660 mm width x 375 mm Height Holding
Max. Turning Length 40 mm 60 mm Standard
Weight : 50 Kgs. Chuck 5" 8" ISO Standard
Spindle Collette C25 / C40 Chuck - 8 ISO Standard
Spindle Bore 32 mm 52 mm ISO Standard
Accessories : Stand
TABLE : 1
LEVER OPERATED QUICK CHANGE COLLECT CHUCK
Lever Operated quick change collect chuck A-25 Lever Operated quick change collect chuck C-40
Email : unitedpd999@gmail.com Website : www.unitedpolygonturning.com