This document provides instructions for removing and disassembling a track roller from a D9R track-type tractor, as well as assembling a track roller. Key steps include:
- Using tools to lift and remove the track roller from the tractor.
- Marking and removing seals, rings, and other components from the roller shaft.
- Cleaning and inspecting parts for wear before reassembly.
- Assembling components like seals and rings onto the shaft using special tools to ensure proper placement and alignment.
- Testing the assembled roller for leaks using air pressure before use.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix t5x) service ...udfjjsjkekemm
This document provides instructions for separating a track on a D8R Track-Type Tractor. It describes removing bolts and washers to separate the track from the track roller frame. Safety precautions are outlined, requiring the machine to be on level ground with blocks to prevent movement when both tracks are separated. Tools needed are listed.
Caterpillar cat 352 f xe vg excavator (prefix sd2) service repair manual (sd2...fjjskekmsemm
This document provides instructions for disassembling and assembling the travel motor on a 352F XE VG Excavator. The disassembly procedure involves 27 steps to remove components from the motor housing, head assembly, rotating group, and barrel assembly. The assembly procedure describes 18 steps and includes specifications for installing components and torquing fasteners correctly. Tools required are listed for both the disassembly and assembly processes.
Caterpillar cat 320 d rr excavator (prefix yds) service repair manual (yds000...fjkskedmme
This document provides instructions for disassembling and assembling the travel motor on a 320D RR excavator. It lists the required tools and parts. The disassembly procedure involves removing 25 components from the travel motor in a specific sequence. The assembly procedure instructs putting the travel motor back together in the reverse order and provides important notes to ensure proper installation.
Caterpillar cat 319 d l excavator (prefix rjp) service repair manual (rjp0000...fjkskedmme
The document provides instructions for disassembling and assembling a final drive on a 319D L and 319D LN excavator. The disassembly procedure involves removing 33 individual parts from the final drive including the cover, carrier assembly, ring gears, and main housing. The assembly procedure instructs installing 31 of the parts back into the final drive in reverse order and provides details on properly preloading the bearings and determining the correct shim thickness.
Caterpillar cat 315 b fm l excavator (prefix 7rz) service repair manual (7rz0...fjsekdmmeed
The document provides instructions for disassembling and assembling track rollers on a 315B excavator. It describes:
1) Removing the track rollers and draining oil from the roller before disassembly.
2) Using presses and tools to remove internal components like seals, shafts, and bearings.
3) Checking shaft end play and installing new internal components in reverse order.
4) Filling the roller with the specified oil and reinstalling it along with the track guide.
Caterpillar cat 319 d l excavator (prefix wbj) service repair manual (wbj0000...fjkskedmme
The document provides instructions for disassembling and assembling a final drive component of a 319D LN excavator. It includes 33 steps for disassembly, removing components like the cover, carrier assembly, ring gears, and seals. The assembly section has 13 steps, including preloading the bearings to determine the correct shim thickness, installing seals and pins, and attaching the main housing to the motor housing. Precise cleaning and use of replacement parts is emphasized throughout.
Caterpillar cat 374 f l excavator (prefix mfl) service repair manual (mfl0000...fjkskedmme
This document provides instructions for disassembling and assembling the final drive on a 374F L Excavator. The disassembly process involves removing over 30 individual parts in a specific sequence, including carrier assemblies, gears, shafts, seals, and housings. The assembly process reverses the disassembly steps and provides details on installing new seals, applying thread locking compounds, and lifting components into place using specialized tools. Precise following of the step-by-step instructions is required to correctly take apart and rebuild the final drive transmission.
Caterpillar cat 320 d lrr excavator (prefix gmx) service repair manual (gmx00...fjkskedmme
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The summaries provide an overview of the component being worked on and refer the user to the detailed instructions and illustrations in the document.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix t5x) service ...udfjjsjkekemm
This document provides instructions for separating a track on a D8R Track-Type Tractor. It describes removing bolts and washers to separate the track from the track roller frame. Safety precautions are outlined, requiring the machine to be on level ground with blocks to prevent movement when both tracks are separated. Tools needed are listed.
Caterpillar cat 352 f xe vg excavator (prefix sd2) service repair manual (sd2...fjjskekmsemm
This document provides instructions for disassembling and assembling the travel motor on a 352F XE VG Excavator. The disassembly procedure involves 27 steps to remove components from the motor housing, head assembly, rotating group, and barrel assembly. The assembly procedure describes 18 steps and includes specifications for installing components and torquing fasteners correctly. Tools required are listed for both the disassembly and assembly processes.
Caterpillar cat 320 d rr excavator (prefix yds) service repair manual (yds000...fjkskedmme
This document provides instructions for disassembling and assembling the travel motor on a 320D RR excavator. It lists the required tools and parts. The disassembly procedure involves removing 25 components from the travel motor in a specific sequence. The assembly procedure instructs putting the travel motor back together in the reverse order and provides important notes to ensure proper installation.
Caterpillar cat 319 d l excavator (prefix rjp) service repair manual (rjp0000...fjkskedmme
The document provides instructions for disassembling and assembling a final drive on a 319D L and 319D LN excavator. The disassembly procedure involves removing 33 individual parts from the final drive including the cover, carrier assembly, ring gears, and main housing. The assembly procedure instructs installing 31 of the parts back into the final drive in reverse order and provides details on properly preloading the bearings and determining the correct shim thickness.
Caterpillar cat 315 b fm l excavator (prefix 7rz) service repair manual (7rz0...fjsekdmmeed
The document provides instructions for disassembling and assembling track rollers on a 315B excavator. It describes:
1) Removing the track rollers and draining oil from the roller before disassembly.
2) Using presses and tools to remove internal components like seals, shafts, and bearings.
3) Checking shaft end play and installing new internal components in reverse order.
4) Filling the roller with the specified oil and reinstalling it along with the track guide.
Caterpillar cat 319 d l excavator (prefix wbj) service repair manual (wbj0000...fjkskedmme
The document provides instructions for disassembling and assembling a final drive component of a 319D LN excavator. It includes 33 steps for disassembly, removing components like the cover, carrier assembly, ring gears, and seals. The assembly section has 13 steps, including preloading the bearings to determine the correct shim thickness, installing seals and pins, and attaching the main housing to the motor housing. Precise cleaning and use of replacement parts is emphasized throughout.
Caterpillar cat 374 f l excavator (prefix mfl) service repair manual (mfl0000...fjkskedmme
This document provides instructions for disassembling and assembling the final drive on a 374F L Excavator. The disassembly process involves removing over 30 individual parts in a specific sequence, including carrier assemblies, gears, shafts, seals, and housings. The assembly process reverses the disassembly steps and provides details on installing new seals, applying thread locking compounds, and lifting components into place using specialized tools. Precise following of the step-by-step instructions is required to correctly take apart and rebuild the final drive transmission.
Caterpillar cat 320 d lrr excavator (prefix gmx) service repair manual (gmx00...fjkskedmme
This document provides instructions for removing and installing various engine components on a Caterpillar 320D RR excavator, including:
- Removing and installing the flywheel using various tools
- Removing and installing the crankshaft rear seal
- Removing and installing the flywheel housing
- Removing and installing the crankshaft pulley
The summaries provide an overview of the component being worked on and refer the user to the detailed instructions and illustrations in the document.
Caterpillar cat 319 d l excavator (prefix fmh) service repair manual (fmh0000...fjkskedmme
This document provides instructions for disassembling and assembling a travel motor. The 27-step disassembly procedure involves removing components like the head, brake piston, barrel assembly, and shaft assembly. The 23-step assembly procedure describes reinstalling these components in reverse order and provides notices about proper installation of parts like the cam plate and keys. Precise alignment of parts is emphasized to prevent damage during reassembly.
Caterpillar cat 315 c excavator (prefix ake) service repair manual (ake00001 ...fjsekdmmeed
The document provides instructions for disassembling and assembling the travel motor of a 315C excavator. It lists 28 steps for disassembly, beginning with removing the piston motor and ending by taking apart the shaft assembly. It then lists 25 steps for reassembly in reverse order, starting with pressing the inner race back onto the shaft and ending by installing the port plate. Precautions are provided regarding cleanliness, identification marks, and pressurized springs. Tools required include link brackets, a slide hammer, bearing puller, and molybdenum grease.
Caterpillar cat 323 e l excavator (prefix tdw) service repair manual (tdw0000...fjskefkemms
This document provides assembly and disassembly instructions for a swing drive on excavator models 323E L, 323E LN, and 323E SA. It includes 21 steps for disassembly and 18 steps for assembly. Key steps include using retaining ring pliers and pullers to remove gears, carriers, shafts, and seals from the housing. Assembly involves pressing components back into place, applying threadlocker, and torquing bolts to specifications. The document provides detailed illustrations and lists required tools for each step.
Caterpillar cat 374 d l excavator (prefix pax) service repair manual (pax0000...fjkskedmme
The document provides instructions for disassembling and assembling components of a 374D L excavator travel motor and final drive system. It describes 17 steps to disassemble the final drive, including removing the final drive cover, ring gear, sun gears, carrier assemblies, planetary gears and shafts. Tools required include a transmission repair stand, link brackets, hydraulic wrench, hex bit socket and forcing bolts. Marks must be made to indicate original part locations for reassembly.
Caterpillar cat 130 g motor grader (prefix 12w) service repair manual (12w010...fjsekdmmeed
1. The document provides instructions for removing and installing a camshaft on a Caterpillar 3304 engine. Key steps include using a lifting device to remove the camshaft, checking camshaft journals for wear, and applying lubricant before installing the camshaft back into the cylinder head.
2. Instructions detail cleaning the cylinder head before installing new camshaft bearings. The camshaft is then positioned and bolts are tightened to specifications.
3. Final steps include checking camshaft endplay and installing related components like the timing gear train before starting the engine.
This document provides installation instructions for a rear power takeoff (RPTO) on a 323 excavator with a C7.1 engine. It involves cleaning components, pressing bearings into housings, aligning gears and idler hubs, lubricating and installing components, and tightening bolts to specified torques. The instructions also cover removing and installing the crankshaft pulley assembly and front seal.
Caterpillar cat 330 l excavator (prefix 8fk) service repair manual (8fk00001 ...fjsjekdmmeme
This document provides instructions for removing and installing a cylinder head on a 330L excavator with a 3306 engine. The key steps are:
1. Remove components attached to the cylinder head like the exhaust manifold, fuel lines, and rocker shaft.
2. Remove the cylinder head bolts and lifting the heavy cylinder head off the engine.
3. Clean the mating surfaces and install a new gasket before reinstalling the cylinder head and torquing the bolts in the specified sequence.
4. Reinstall the removed components like the rocker shaft after installing the new cylinder head.
Caterpillar cat 390 f excavator (prefix hng) service repair manual (hng00001 ...fjskefksemer
This document provides instructions for removing and installing the front gear group of a C18 engine. The removal procedure involves removing 14 bolts, plates, gears and seals. Special care must be taken to mark gear orientations and not turn the crankshaft during removal. The installation procedure describes cleaning components, applying thread lock compound, installing 14 gears, plates and seals in the correct order and orientation, and adjusting backlash between gears. Proper removal and installation is important to avoid engine damage.
Caterpillar cat 326 d2 l excavator (prefix rec) service repair manual (rec000...fikkskmmdm
This document provides instructions to disassemble a final drive on an excavator. It outlines 33 steps to fully disassemble the final drive. Key steps include removing the cover, carrier assembly, planetary gears, and separating the main housing from the motor housing. Various tools are required including link brackets, eyebolts, retaining ring pliers, and a transmission repair stand to support components. Cleanliness is important to prevent dirt from entering during reassembly.
Caterpillar cat 16 g motor grader (prefix 93u) service repair manual (93u0267...fjsekdmmeed
This document provides instructions for removing and installing rocker shaft assemblies, push rods, valve lifters, and related components on a 3406C diesel engine. The key steps include:
1. Removing the valve covers, fuel lines, rocker shaft assemblies, push rods, and valve lifters. Identification marks should be made on removed parts.
2. Cleaning and lubricating replacement parts as needed before installation. Parts should be installed in their original locations when possible.
3. Installing the valve lifters, push rods, rocker shaft assemblies, fuel lines, adjusting the valves, and replacing the valve covers. Torque specifications and safety notices are provided throughout.
Caterpillar cat 349 d2 l excavator (prefix yae) service repair manual (yae000...cdsaas
The document provides instructions for assembling and installing a travel motor. It outlines 33 steps for assembling components like pistons, seals, plates, and bearings. Measurement checks are specified to ensure proper assembly. Tools required are listed. Cleanliness is emphasized to prevent contaminating the hydraulic system.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix 7xm) service ...fujsjejfkskekem
This document provides the disassembly and assembly procedures for the track roller frame of a D8R track-type tractor. The disassembly procedure involves 29 steps to remove components such as idlers, rollers, retainers, seals, bearings, and pins. The assembly procedure instructs technicians on installing these components in the reverse order and includes safety notices about using hydraulic tools.
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...fjkskedmme
This document provides instructions for removing and installing the crankshaft and crankshaft gear on Caterpillar 3064 and 3066 engines. It outlines the required tools and step-by-step procedures for removing components like the main bearings, connecting rod caps, and crankshaft. Instructions are provided for checking clearances and installing each part in reverse order. Proper cleaning and lubrication of parts is emphasized to prevent premature wear.
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...fjskefkemms
This document provides instructions for removing and installing various engine components on a 16H NA Motor Grader with a 3406C engine, including:
1. Timing gears and plate removal and installation.
2. Camshaft removal and installation.
3. Camshaft bearing removal and installation.
4. Connecting rod bearing removal and installation.
5. Crankshaft main bearing removal and installation.
The instructions describe the individual steps for removing and installing each component, including the use of any necessary tools. Safety notices and additional notes are also provided throughout.
Caterpillar cat 320 d lrr excavator (prefix eby) service repair manual (eby00...fjkskedmme
This document provides instructions for removing and installing various components of an excavator engine, including:
1. Removing and installing the flywheel housing, which requires using lifting straps and removing bolts.
2. Removing and installing the crankshaft pulley, which requires using a puller and tightening a nut.
3. Removing the crankshaft front seal using a slide hammer puller and installing a new seal with an installer tool.
Caterpillar cat 120 h es motor grader (prefix 6nm) service repair manual (6nm...fjsekdmmeed
The document provides instructions for removing and installing final drives on a 120H ES motor grader. It describes using an O.T.C. 1790 Transmission Jack to support the final drive while removing nuts and washers. Upon removal of the final drive, it can be cleaned and inspected as needed before reversing the process to reinstall it with new nuts, washers and thread locking compound.
John deere 664 row crop headers service repair manual (tm4530)fjjskkefksme
This technical manual is written for an experienced technician. It provides concise guides for various components requiring service, including repair sections telling how to repair components and operation and test sections helping to identify routine failures quickly. Information is organized into groups for the various components requiring service instruction. The manual also includes safety alerts and cautions throughout.
John deere 665 r row crop headers service repair manual (tm4530)fjjskkefksme
This technical manual is written for an experienced technician. It provides concise guides for various components requiring service, including repair sections telling how to repair components and operation and test sections helping to identify routine failures quickly. Information is organized into groups for the various components requiring service instruction. The manual also includes safety alerts and cautions throughout.
John deere 666 row crop headers service repair manual (tm4530)fjjskkefksme
This technical manual is written for an experienced technician. It provides concise guides for various components requiring service, including repair sections telling how to repair components and operation and test sections helping to identify routine failures quickly. Information is organized into groups for the various components requiring service instruction. The manual also includes safety alerts and cautions throughout.
John deere 666 r row crop headers service repair manual (tm4530)fjjskkefksme
This technical manual is written for an experienced technician. It provides concise guides for various components requiring service, including repair sections telling how to repair components and operation and test sections helping to identify routine failures quickly. Information is organized into groups for the various components requiring service instruction. The manual also includes safety symbols and cautions presented throughout the text.
Caterpillar cat 319 d l excavator (prefix fmh) service repair manual (fmh0000...fjkskedmme
This document provides instructions for disassembling and assembling a travel motor. The 27-step disassembly procedure involves removing components like the head, brake piston, barrel assembly, and shaft assembly. The 23-step assembly procedure describes reinstalling these components in reverse order and provides notices about proper installation of parts like the cam plate and keys. Precise alignment of parts is emphasized to prevent damage during reassembly.
Caterpillar cat 315 c excavator (prefix ake) service repair manual (ake00001 ...fjsekdmmeed
The document provides instructions for disassembling and assembling the travel motor of a 315C excavator. It lists 28 steps for disassembly, beginning with removing the piston motor and ending by taking apart the shaft assembly. It then lists 25 steps for reassembly in reverse order, starting with pressing the inner race back onto the shaft and ending by installing the port plate. Precautions are provided regarding cleanliness, identification marks, and pressurized springs. Tools required include link brackets, a slide hammer, bearing puller, and molybdenum grease.
Caterpillar cat 323 e l excavator (prefix tdw) service repair manual (tdw0000...fjskefkemms
This document provides assembly and disassembly instructions for a swing drive on excavator models 323E L, 323E LN, and 323E SA. It includes 21 steps for disassembly and 18 steps for assembly. Key steps include using retaining ring pliers and pullers to remove gears, carriers, shafts, and seals from the housing. Assembly involves pressing components back into place, applying threadlocker, and torquing bolts to specifications. The document provides detailed illustrations and lists required tools for each step.
Caterpillar cat 374 d l excavator (prefix pax) service repair manual (pax0000...fjkskedmme
The document provides instructions for disassembling and assembling components of a 374D L excavator travel motor and final drive system. It describes 17 steps to disassemble the final drive, including removing the final drive cover, ring gear, sun gears, carrier assemblies, planetary gears and shafts. Tools required include a transmission repair stand, link brackets, hydraulic wrench, hex bit socket and forcing bolts. Marks must be made to indicate original part locations for reassembly.
Caterpillar cat 130 g motor grader (prefix 12w) service repair manual (12w010...fjsekdmmeed
1. The document provides instructions for removing and installing a camshaft on a Caterpillar 3304 engine. Key steps include using a lifting device to remove the camshaft, checking camshaft journals for wear, and applying lubricant before installing the camshaft back into the cylinder head.
2. Instructions detail cleaning the cylinder head before installing new camshaft bearings. The camshaft is then positioned and bolts are tightened to specifications.
3. Final steps include checking camshaft endplay and installing related components like the timing gear train before starting the engine.
This document provides installation instructions for a rear power takeoff (RPTO) on a 323 excavator with a C7.1 engine. It involves cleaning components, pressing bearings into housings, aligning gears and idler hubs, lubricating and installing components, and tightening bolts to specified torques. The instructions also cover removing and installing the crankshaft pulley assembly and front seal.
Caterpillar cat 330 l excavator (prefix 8fk) service repair manual (8fk00001 ...fjsjekdmmeme
This document provides instructions for removing and installing a cylinder head on a 330L excavator with a 3306 engine. The key steps are:
1. Remove components attached to the cylinder head like the exhaust manifold, fuel lines, and rocker shaft.
2. Remove the cylinder head bolts and lifting the heavy cylinder head off the engine.
3. Clean the mating surfaces and install a new gasket before reinstalling the cylinder head and torquing the bolts in the specified sequence.
4. Reinstall the removed components like the rocker shaft after installing the new cylinder head.
Caterpillar cat 390 f excavator (prefix hng) service repair manual (hng00001 ...fjskefksemer
This document provides instructions for removing and installing the front gear group of a C18 engine. The removal procedure involves removing 14 bolts, plates, gears and seals. Special care must be taken to mark gear orientations and not turn the crankshaft during removal. The installation procedure describes cleaning components, applying thread lock compound, installing 14 gears, plates and seals in the correct order and orientation, and adjusting backlash between gears. Proper removal and installation is important to avoid engine damage.
Caterpillar cat 326 d2 l excavator (prefix rec) service repair manual (rec000...fikkskmmdm
This document provides instructions to disassemble a final drive on an excavator. It outlines 33 steps to fully disassemble the final drive. Key steps include removing the cover, carrier assembly, planetary gears, and separating the main housing from the motor housing. Various tools are required including link brackets, eyebolts, retaining ring pliers, and a transmission repair stand to support components. Cleanliness is important to prevent dirt from entering during reassembly.
Caterpillar cat 16 g motor grader (prefix 93u) service repair manual (93u0267...fjsekdmmeed
This document provides instructions for removing and installing rocker shaft assemblies, push rods, valve lifters, and related components on a 3406C diesel engine. The key steps include:
1. Removing the valve covers, fuel lines, rocker shaft assemblies, push rods, and valve lifters. Identification marks should be made on removed parts.
2. Cleaning and lubricating replacement parts as needed before installation. Parts should be installed in their original locations when possible.
3. Installing the valve lifters, push rods, rocker shaft assemblies, fuel lines, adjusting the valves, and replacing the valve covers. Torque specifications and safety notices are provided throughout.
Caterpillar cat 349 d2 l excavator (prefix yae) service repair manual (yae000...cdsaas
The document provides instructions for assembling and installing a travel motor. It outlines 33 steps for assembling components like pistons, seals, plates, and bearings. Measurement checks are specified to ensure proper assembly. Tools required are listed. Cleanliness is emphasized to prevent contaminating the hydraulic system.
Caterpillar cat d8 r track type tractor dozer bulldozer (prefix 7xm) service ...fujsjejfkskekem
This document provides the disassembly and assembly procedures for the track roller frame of a D8R track-type tractor. The disassembly procedure involves 29 steps to remove components such as idlers, rollers, retainers, seals, bearings, and pins. The assembly procedure instructs technicians on installing these components in the reverse order and includes safety notices about using hydraulic tools.
Caterpillar cat 320 d lrr excavator (prefix fxk) service repair manual (fxk00...fjkskedmme
This document provides instructions for removing and installing the crankshaft and crankshaft gear on Caterpillar 3064 and 3066 engines. It outlines the required tools and step-by-step procedures for removing components like the main bearings, connecting rod caps, and crankshaft. Instructions are provided for checking clearances and installing each part in reverse order. Proper cleaning and lubrication of parts is emphasized to prevent premature wear.
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...fjskefkemms
This document provides instructions for removing and installing various engine components on a 16H NA Motor Grader with a 3406C engine, including:
1. Timing gears and plate removal and installation.
2. Camshaft removal and installation.
3. Camshaft bearing removal and installation.
4. Connecting rod bearing removal and installation.
5. Crankshaft main bearing removal and installation.
The instructions describe the individual steps for removing and installing each component, including the use of any necessary tools. Safety notices and additional notes are also provided throughout.
Caterpillar cat 320 d lrr excavator (prefix eby) service repair manual (eby00...fjkskedmme
This document provides instructions for removing and installing various components of an excavator engine, including:
1. Removing and installing the flywheel housing, which requires using lifting straps and removing bolts.
2. Removing and installing the crankshaft pulley, which requires using a puller and tightening a nut.
3. Removing the crankshaft front seal using a slide hammer puller and installing a new seal with an installer tool.
Caterpillar cat 120 h es motor grader (prefix 6nm) service repair manual (6nm...fjsekdmmeed
The document provides instructions for removing and installing final drives on a 120H ES motor grader. It describes using an O.T.C. 1790 Transmission Jack to support the final drive while removing nuts and washers. Upon removal of the final drive, it can be cleaned and inspected as needed before reversing the process to reinstall it with new nuts, washers and thread locking compound.
John deere 664 row crop headers service repair manual (tm4530)fjjskkefksme
This technical manual is written for an experienced technician. It provides concise guides for various components requiring service, including repair sections telling how to repair components and operation and test sections helping to identify routine failures quickly. Information is organized into groups for the various components requiring service instruction. The manual also includes safety alerts and cautions throughout.
John deere 665 r row crop headers service repair manual (tm4530)fjjskkefksme
This technical manual is written for an experienced technician. It provides concise guides for various components requiring service, including repair sections telling how to repair components and operation and test sections helping to identify routine failures quickly. Information is organized into groups for the various components requiring service instruction. The manual also includes safety alerts and cautions throughout.
John deere 666 row crop headers service repair manual (tm4530)fjjskkefksme
This technical manual is written for an experienced technician. It provides concise guides for various components requiring service, including repair sections telling how to repair components and operation and test sections helping to identify routine failures quickly. Information is organized into groups for the various components requiring service instruction. The manual also includes safety alerts and cautions throughout.
John deere 666 r row crop headers service repair manual (tm4530)fjjskkefksme
This technical manual is written for an experienced technician. It provides concise guides for various components requiring service, including repair sections telling how to repair components and operation and test sections helping to identify routine failures quickly. Information is organized into groups for the various components requiring service instruction. The manual also includes safety symbols and cautions presented throughout the text.
Caterpillar cat d350 e articulated truck (prefix 9lr) service repair manual (...fjjskkefksme
The document provides instructions for removing and installing a hoist control valve and hoist cylinder on a Caterpillar D350E articulated truck. It describes removing hoses, lines, and mounting hardware to detach the components. Safety precautions are noted regarding hot hydraulic oil. The hoist control removal process involves taking out pins and levers. Reinstallation follows the removal steps in reverse order.
Caterpillar cat d350 d articulated truck (prefix 9rf) service repair manual (...fjjskkefksme
The document provides instructions for removing and installing steering control valves, hoist control valves, and systems protection valves on D25D, D30D, and D350D articulated dump trucks. The instructions describe removing hoses and lines, draining fluids if needed, removing mounting hardware, and reversing the steps to install the valves. Detailed steps are provided for disassembling and assembling the steering control valve and hoist control valve components. Safety precautions are noted for working on air systems.
Caterpillar cat d350 d articulated truck (prefix 3aj) service repair manual (...fjjskkefksme
This document provides instructions for removing and installing the primary hydraulic pump on D25D, D30D, and D350D articulated dump trucks. It describes:
1) Removing the pump by draining fluid, removing lines and hoses, and loosening mounting bolts.
2) Disassembling the pump by removing covers, seals, rotors, vanes and other internal components.
3) Assembling the pump by installing components in reverse order, ensuring proper orientation and alignment.
Caterpillar cat d350 d articulated truck (prefix 1hk) service repair manual (...fjjskkefksme
The document provides instructions for removing and installing steering control valves, hoist control valves, and systems protection valves on D25D, D30D, and D350D articulated dump trucks. The instructions describe disconnecting hydraulic lines, removing mounting bolts, and reinstalling components in reverse order. Safety precautions are provided for working on air systems and components.
Caterpillar cat d250 e ii articulated truck (prefix 4ps) service repair manua...fjjskkefksme
This document provides instructions for disassembling and assembling the piston pump used for steering on a Caterpillar D250E II articulated truck. The disassembly process involves removing 21 individual components from the pump housing in a specific order. The assembly process reverses this, instructing technicians to install the 21 components back into the pump housing in the reverse order and noting the importance of alignment marks and original component positions. Lubricants and press tools are also listed as required for the assembly process.
Caterpillar cat d250 e articulated truck (prefix 5tn) service repair manual (...fjjskkefksme
The document provides instructions for installing, disassembling, and assembling a turbocharger for a Caterpillar 3306 engine. It includes:
1) Steps for installing the turbocharger onto the engine, including positioning gaskets and bolts.
2) Procedures for disassembling the turbocharger into its housing components using alignment marks and clamps.
3) Directions for reassembling the turbocharger housings back together in the correct alignment using clamps and torque specifications.
Caterpillar cat d250 d articulated truck (prefix 9mg) service repair manual (...fjjskkefksme
The document provides instructions for disassembling and assembling the governor of an articulated truck. It lists 57 steps to disassemble the front and rear housings of the governor. Tools required include a governor repair fixture, retaining ring pliers, pin punch, clevis driver, and legs to mount the rear housing. Cautions are provided regarding cleaning parts and containing fluids during maintenance.
Caterpillar cat d250 d articulated truck (prefix 6ng) service repair manual (...fjjskkefksme
This document provides instructions for disassembling a Type I engine governor. It lists 57 steps to remove parts like the cover, springs, flyweights, housing pieces, and shutoff assembly. Tools include a governor repair fixture, retaining ring pliers, pin punch, and clevis driver. Inspect all parts for wear and replace as specified. Take care to contain fluids and properly dispose of them.
Caterpillar cat d250 b articulated dump truck (prefix 5wd) service repair man...fjjskkefksme
The document provides instructions for installing a fuel injection pump housing and governor on a caterpillar engine. It describes positioning the engine's number 1 piston at top center, installing the fuel injection pump housing and ensuring it is timed correctly to the engine using timing pins. It also details attaching the governor, applying the appropriate torque to secure components, and installing covers to complete the assembly. The instructions are intended to ensure proper timing of fuel delivery to the engine cylinders.
Caterpillar cat d44 b articulated dump truck (prefix 8sd) service repair manu...fjjskkefksme
The document provides instructions for removing and installing various engine components on a Caterpillar 3408 engine, including:
- Removing and installing the engine oil cooler by removing mounting brackets and cleaning the tube bundles.
- Removing and installing the oil filter base by removing mounting bolts and filters, and replacing O-rings on fittings.
- Removing and installing oil bypass valves by removing housing covers and installing springs and plungers.
- Removing and installing the engine oil cooler and lines by removing elbows and coolers, cleaning tube bundles, and replacing O-rings on fittings.
- Removing and installing the aftercooler by draining coolant, removing mounting bolts and covers, and cleaning and replacing O
Caterpillar cat d35 hp articulated dump truck (prefix 3fd) service repair man...fjjskkefksme
The document provides instructions for assembling a starting motor for an articulated dump truck. It describes 22 steps for assembly, including lubricating parts, installing bushings, seals, wires, and other components in the correct positions and order. Torques are specified for tightening bolts and nuts. The final steps connect wires and install plugs to complete the assembly of the starting motor.
Caterpillar cat d35 c articulated dump truck (prefix 2gd) service repair manu...fjjskkefksme
The document provides instructions for installing a fuel injection pump housing and governor on a Caterpillar 3306 engine. It describes:
1) Removing the starting motor and using a tool to find the top center position of the number 1 piston by turning the flywheel and installing a bolt.
2) Installing the fuel injection pump housing by aligning pins and ensuring proper clearance and positioning of components.
3) Installing the governor and checking valve timing before reinstalling covers.
Caterpillar cat d30 d articulated truck (prefix 9rf) service repair manual (9...fjjskkefksme
The document provides instructions for removing and installing a steering control valve, hoist control valve, and systems protection valve on D25D, D30D, and D350D articulated dump trucks. It describes disconnecting hydraulic lines and removing mounting bolts to remove the valves, then reversing the process to install them. It also gives steps to disassemble and reassemble the internal components of each valve.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9R TRACK-TYPE TRACTOR WDM
Configuration: D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408C Engine
Disassembly and Assembly
D9R Track-Type Tractor Power Train
Media Number -SENR5387-14 Publication Date -01/08/2018 Date Updated -30/08/2018
i06194021
Track Roller - Remove
SMCS - 4180-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT2223 Strap Group 1
B 183-4799 Track Roller Lifting Bracket 1
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Loosen the track. See "Separation of Track".
2. Install tool (A) in order to hold the major bogies in position.
1/2
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. 3. In order to remove the track roller, lift that side of the tractor.
Illustration 1 g00626261
4. Fasten a hoist to tool (B) . Put tool (B) under the track roller.
5. Remove four bolts (3) and two caps (2) that hold the track roller to the minor bogie.
Illustration 2 g00626267
6. Remove track roller (4) from the minor bogie with tool (B) . The weight of the track roller is
approximately 97 kg (214 lb).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Apr 17 09:22:00 UTC+0800 2020
2/2
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9R TRACK-TYPE TRACTOR WDM
Configuration: D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408C Engine
Disassembly and Assembly
D9R Track-Type Tractor Power Train
Media Number -SENR5387-14 Publication Date -01/08/2018 Date Updated -30/08/2018
i07393407
Track Roller - Disassemble
SMCS - 4180-015
Disassembly Procedure
Start By:
a. Remove the track rollers.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Illustration 1 g06306530
1. Use a hammer and a punch, and drive the plug out of stopper (2).
2. Use a variable speed drill and a 12.7 mm (0.5 inch) drill bit to slowly remove the stopper.
Remove stopper (2) from the ends of the shaft.
3. Remove bolts (3) and retainer (1) from both sides of the track roller.
1/3
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g06306531
4. Remove O-ring seal (5) from retainer (1).
Note: Put identification marks on the seals in case the seals need to be used again. The seals
can be assembled and installed in the original position.
5. Put identification marks on seal ring (4). Remove the seal ring from retainer (1). Remove
the O-ring seal from the seal ring.
Illustration 3 g06306532
Note: Early track rollers do not have toric stabilizer (7).
6. Put identification marks on seal ring (6). Remove the seal ring and toric stabilizer (7) from
shaft (8).
7. Remove the toric ring from seal ring (6).
2/3
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 4 g06306546
8. Pull shaft (8) out of the track roller far enough to fasten a hoist to the shaft.
9. Fasten a hoist to shaft (8). Remove the shaft from track roller (9). The weight of the shaft is
18 kg (40 lb).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Apr 17 09:22:59 UTC+0800 2020
3/3
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9R TRACK-TYPE TRACTOR WDM
Configuration: D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408C Engine
Disassembly and Assembly
D9R Track-Type Tractor Power Train
Media Number -SENR5387-14 Publication Date -01/08/2018 Date Updated -30/08/2018
i07393455
Track Roller - Assemble
SMCS - 4180-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8T-7641 Seal Installer 1
B 8T-0822 Alignment Sleeve 1
C 5P-7419 Plug Installer 1
D Testing Tool 1
E 8S-2328 Dial Indicator 1
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Personal injury can result from acid.
Wear all necessary protective equipment, such as rubber gloves and
goggles when working with acid.
The bottle containing the etchant should be properly marked ACID and
should be stored in a protective place.
1/7
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. 1. Clean the parts and inspect the parts for wear or for damage. Replace all parts that are
damaged or worn.
Illustration 1 g06306546
Note: The bearing in track roller (9) can be damaged when shaft (8) is installed in the track
roller.
2. Fasten a hoist to shaft (8). Carefully put the shaft in track roller (9).
Illustration 2 g06306530
Note: Early track rollers have no toric stabilizers (7).
3. Put toric stabilizers (7) in position on both ends of shaft (8).
2/7
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 3 g06306615
Note: See, "Duo-Cone Floating Seals" before installing any of the Duo-Cone seals.
4. Put toric ring (10) in position in seal ring (6). Make sure that the toric ring is straight in seal
ring (6).
Illustration 4 g06306616
5. Use tool (A) to install the toric ring and seal ring (6) on shaft (8). Install the ring until tool
(A) makes contact with the end of the shaft.
Illustration 5 g06306622
3/7
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. 6. Use a depth micrometer (11) to measure the distance between seal ring (6) and the shaft.
The shaft is 90 degrees and four locations away from seal ring (6). The difference in these
measurements must not be more than 0.8 mm (0.0315 inch).
7. If adjustments to seal ring (6) are necessary, use tool (A) to adjust the seal ring on the shaft.
8. Repeat steps 5 to 9 for installation of the toric ring. Also install the seal ring on the other
side of the track roller.
Illustration 6 g00523512
9. Put O-ring seal (12) in position on seal ring (4). Make sure that the O-ring seal is straight on
the seal ring.
Illustration 7 g06306624
10. Put the O-ring seal and seal ring (4) in position in retainer (1). Use tool (A) to install the seal
ring in the retainer. Install the O-ring seal and seal ring (4) until the O-ring seal makes
contact with the bottom of the retainer.
11. Use depth micrometer (11) to measure the distance from the surface of the retainer to the
surface of seal ring (4). The seal rings can be found at four locations. The difference in these
measurements must not be more than 0.1 mm (0.0039 inch).
12. If adjustments to the seal ring are necessary, use tool (A) to adjust the seal ring in the
retainer.
4/7
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 8 g00523515
13. Put O-ring seal (5) in position in the groove in retainer (1).
14. Put petroleum jelly or grease on the O-ring seal. The petroleum jelly and grease will hold
the seal in place on the retainers.
Illustration 9 g06306625
15. Make sure that the faces of the seal rings are clean and free of any foreign material.
16. Put a thin film of clean oil on the face of the seal rings.
17. Put tool (A) in position in the bore of retainer (1) and the seal ring. Use tool (B) to put the
retainer and put the seal ring in the original position on the track roller.
5/7
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 10 g06306632
18. Use tool (B) to hold the seal ring and retainer (1) in the correct position, and install bolts (3).
Tighten the bolts evenly to keep the retainer in alignment with the track roller.
19. Tighten the bolts to a torque of 135 ± 15 N·m (100 ± 11 lb ft).
20. Repeat steps 11 through 22 to install the retainer on the other side of the track roller.
Illustration 11 g06306636
21. Put clean oil on stopper (2). Install the stopper in one end of shaft (8). Install the stopper
10 ± 4 N·m (7.3756 ± 2.9502 lb ft) below the surface of the shaft end.
22. Use tool (C) to install the plug-in stopper (2). Install the plug even with the end of the
stopper.
23. Use tool (D) to pressure test the track roller.
a. Put air free of water under a pressure of 280 kPa (41 psi) into the roller shaft.
b. b. If there is a pressure reduction in 10 seconds or less, there is a leak in the track
roller. The track roller must be disassembled and checked.
Illustration 12 g06306638
6/7
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 24. Use tool (E) to check the end play of shaft (8). The end play must be 0.22 to .98 mm
(0.0087 to .0039 inch).
25. Fill track roller shaft (8) with 720 ± 15 mL (24.4 ± .51 oz) of SAE 30 Oil.
26. Put clean oil on the stopper. Install the stopper in the end of shaft (8). Install the stopper
10 ± 4 mm (0.394 ± 0.158 inch) below the surface of the end of the shaft.
27. Use tool (C) to install the plug in the stopper. Install the plug even with the end of the
stopper.
End By:
a. Install the track rollers.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Apr 17 09:23:59 UTC+0800 2020
7/7
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9R TRACK-TYPE TRACTOR WDM
Configuration: D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408C Engine
Disassembly and Assembly
D9R Track-Type Tractor Power Train
Media Number -SENR5387-14 Publication Date -01/08/2018 Date Updated -30/08/2018
i06194032
Track Roller - Install
SMCS - 4180-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT2223 Strap Group 1
B 183-4799 Track Roller Bracket 1
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1/2
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 1 g00626267
1. Use a hoist and tool (B) and put track roller (4) in position in the minor bogie.
Illustration 2 g00626261
2. Align the pin in caps (2) with the hole in the track roller shaft, and install caps (2) and bolts
(3) . Tighten the bolts to a torque of 750 ± 75 N·m (553 ± 55 lb ft).
3. Put track guide in position on the major bogie. Install the bolts that hold the major bogie in
place. Tighten the bolts to a torque of 475 ± 50 N·m (350 ± 37 lb ft).
4. Lower the tractor to the ground and remove tool (A) .
5. Adjust the track. Refer to Disassembly and Assembly, "Track - Connect"
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Apr 17 09:24:58 UTC+0800 2020
2/2
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9R TRACK-TYPE TRACTOR WDM
Configuration: D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408C Engine
Disassembly and Assembly
D9R Track-Type Tractor Power Train
Media Number -SENR5387-14 Publication Date -01/08/2018 Date Updated -30/08/2018
i07394827
Track Adjuster - Remove
SMCS - 4157-011
Removal Procedure
Start By:
a. Remove the front track roller frame.
Illustration 1 g06306929
1. Remove bolt (1) and the spacer from cable (2).
1/2
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 2 g06306943
2. Fasten an appropriate lifting device to track adjuster (3). Remove the track adjuster from the
recoil spring. The weight of the track adjuster is 113 kg (249 lb).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Apr 17 09:25:57 UTC+0800 2020
2/2
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9R TRACK-TYPE TRACTOR WDM
Configuration: D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408C Engine
Disassembly and Assembly
D9R Track-Type Tractor Power Train
Media Number -SENR5387-14 Publication Date -01/08/2018 Date Updated -30/08/2018
i01027944
Track Adjuster - Disassemble
SMCS - 4157-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-4947 Hydraulic Cylinder Repair Stand 1
Start By:
a. Remove the track adjusters. See Disassembly and Assembly, "Track Adjuster - Remove".
Illustration 1 g00626596
1. Put the track adjuster in position on tool (A).
2. Remove cylinder (2) and piston (3) from cylinder assembly (1).
1/4
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 2 g00626597
3. Remove spiral ring (5) and retainer ring (4) from the piston.
Illustration 3 g00626598
4. Remove seal assembly (6) from the piston.
Illustration 4 g00626743
5. Remove seal rings (7) and (8) from the seal.
2/4
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 5 g00626601
6. Remove wear rings (9) from the cylinder.
Illustration 6 g00626602
7. Remove cylinder (2) from the piston.
Illustration 7 g00626603
8. Remove wear rings (10) from the inside of the cylinder.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Fri Apr 17 09:26:57 UTC+0800 2020
3/4
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9R TRACK-TYPE TRACTOR WDM
Configuration: D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408C Engine
Disassembly and Assembly
D9R Track-Type Tractor Power Train
Media Number -SENR5387-14 Publication Date -01/08/2018 Date Updated -30/08/2018
i01027945
Track Adjuster - Assemble
SMCS - 4157-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-4947 Hydraulic Cylinder Repair Stand 1
1. Put the wear rings in SAE 30 oil. Make sure that the rings are in the oil for a long enough
time period so that the rings become filled and saturated with the oil.
Illustration 1 g00626603
2. Install wear rings (10) on the inside of the cylinder.
1/4
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 2 g00626602
3. Install cylinder (2) on the piston.
Illustration 3 g00626601
4. Put wear rings (9) in position on the cylinder.
Illustration 4 g00626743
5. Put seal rings (7) and (8) in position on the seal.
2/4
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Illustration 5 g00626598
6. Install seal assembly (6) on the piston.
Illustration 6 g00626597
7. Install retainer ring (4) and spiral ring (5) on the piston.
Illustration 7 g00626596
8. Put cylinder assembly (1) in position on tool (A). Put SAE 30 oil on the seals.
NOTICE
3/4
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Make sure that you do not damage the seal when you install piston (3)
and cylinder (2) in the cylinder. Make sure that the lip of the seal goes
past the chamfer in the cylinder.
9. Install piston (3) and cylinder (2) into the cylinder assembly.
End By:
a. Install the track adjusters. See Disassembly and Assembly, "Track Adjuster - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Apr 17 09:27:56 UTC+0800 2020
4/4
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9R TRACK-TYPE TRACTOR WDM
Configuration: D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408C Engine
Disassembly and Assembly
D9R Track-Type Tractor Power Train
Media Number -SENR5387-14 Publication Date -01/08/2018 Date Updated -30/08/2018
i07395126
Track Adjuster - Install
SMCS - 4157-012
Installation Procedure
Illustration 1 g06307207
1. Fasten an appropriate lifting device to track adjuster (3).
2. Put the track adjuster in position in the front track roller frame.
1/2
D9R TRACK-TYPE TRACTOR WDM00001-UP (MACHINE) POWERED BY 3408...
2020/4/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...