Testing/Manufacture/Cobb tester
•
0 likes•111 views
This document describes a method for measuring the water absorption of sized paper using a one nose absorption roller and test rings. The method involves weighing a test piece of paper, placing it under the cylinder and pouring 1 ml of water over it. After a specified time, the water is poured off and excess water is removed from the test piece using blotting paper and the roller. The test piece is weighed again and the results are calculated and reported.
Report
Share
Report
Share
Download to read offline
Recommended
Process Automation in Pharm. Industry.
This document provides an overview of process automation in the pharmaceutical industry. It discusses various pharmaceutical manufacturing processes like granulation, drying, milling, and compression. It also describes different types of pharmaceutical processing equipment used for unit operations like mixing, drying, milling etc. Finally, it discusses process automation and concepts like cleaning-in-place and sterilization-in-place which are important for ensuring sterility in pharmaceutical manufacturing.
Evaluation of capsules
Quality Control Tests Of Capsules dosage form.
1. Weight Variation Test
2. Content Uniformity Test
3. Dissolution Test
4. Disintegration Test
5. Leak Test
Visual Inspection of Parentetal Drug Products in Pharmaceutical Quality testing
Visual Inspection in Parenteral Drug Products
The document discusses visual inspection of parenteral drug products. It notes that visual inspection is needed to detect defects like particulate matter that could impact patient safety. Inspection is required by compendial and regulatory standards to ensure products are essentially free of visible particles. The summary describes the types of defects classified as critical, major, or minor and the acceptable quality limits for each. It also provides an overview of manual, semi-automated, and automated inspection methods and defines what constitutes a "visible particle" during the inspection process.
To Study Accelerating and Retarding Behaviors of Molasses in Cement Mortar an...
This document summarizes a study on the effects of adding molasses, a byproduct of sugar production, to cement mortar and concrete. Molasses was collected from a sugar mill in Sonepat, Haryana, India. Tests were conducted to determine the impact of different molasses dosage levels (0-2% by weight of cement) on properties like setting time, water demand, air entrainment, and compressive strength of mortar and concrete. The results showed that molasses acts as an accelerator at dosages up to 0.5%, shortening setting time, but acts as a retarder at higher dosages. It also slightly reduces water demand and increases air content in fresh concrete. Compressive
Brochure schott vials_row
The document discusses SCHOTT's products and services for pharmaceutical primary packaging. SCHOTT is a leading supplier of glass packaging for pharmaceuticals, including vials, ampoules, and syringes. They provide products at different quality levels from their StandardLine and TopLine options. The TopLine options offer customized specifications and quality levels for applications such as lyophilization and sensitive drug formulations. SCHOTT uses high-quality FIOLAX glass and has strict quality controls and inspection processes to deliver defect-free packaging solutions.
Qualifying visual inspectors
The document discusses the process for qualifying visual inspectors for pharmaceutical inspection including selecting inspectors based on vision and observation skills, extensive training using mock defect containers, and qualification testing to accurately identify defect types with acceptable error rates. It also reviews inspection parameters, defect categorization, sampling plans, and analytical techniques for investigating particulate matter found during inspection.
Prefilled syringes
This document provides an overview of prefilled syringes, including what they are, their purpose, types, materials, filling and sterilization processes, advantages and disadvantages, and some examples of marketed products. Prefill syringes are single-dose packages containing a parental drug and fixed needle provided by the manufacturer. They serve the purposes of primary packaging and a delivery system to administer the correct dose to patients. The two main types are glass-based and plastic-based systems, with plastic gaining acceptance for benefits like break resistance and decreased reactivity. Proper filling and sterilization processes are important to ensure safety and efficacy.
Seal tick leak tester
Sealtick provides Professional services in fixing your leaks.
To know more Please visit : www.sealtick.com
Recommended
Process Automation in Pharm. Industry.
This document provides an overview of process automation in the pharmaceutical industry. It discusses various pharmaceutical manufacturing processes like granulation, drying, milling, and compression. It also describes different types of pharmaceutical processing equipment used for unit operations like mixing, drying, milling etc. Finally, it discusses process automation and concepts like cleaning-in-place and sterilization-in-place which are important for ensuring sterility in pharmaceutical manufacturing.
Evaluation of capsules
Quality Control Tests Of Capsules dosage form.
1. Weight Variation Test
2. Content Uniformity Test
3. Dissolution Test
4. Disintegration Test
5. Leak Test
Visual Inspection of Parentetal Drug Products in Pharmaceutical Quality testing
Visual Inspection in Parenteral Drug Products
The document discusses visual inspection of parenteral drug products. It notes that visual inspection is needed to detect defects like particulate matter that could impact patient safety. Inspection is required by compendial and regulatory standards to ensure products are essentially free of visible particles. The summary describes the types of defects classified as critical, major, or minor and the acceptable quality limits for each. It also provides an overview of manual, semi-automated, and automated inspection methods and defines what constitutes a "visible particle" during the inspection process.
To Study Accelerating and Retarding Behaviors of Molasses in Cement Mortar an...
This document summarizes a study on the effects of adding molasses, a byproduct of sugar production, to cement mortar and concrete. Molasses was collected from a sugar mill in Sonepat, Haryana, India. Tests were conducted to determine the impact of different molasses dosage levels (0-2% by weight of cement) on properties like setting time, water demand, air entrainment, and compressive strength of mortar and concrete. The results showed that molasses acts as an accelerator at dosages up to 0.5%, shortening setting time, but acts as a retarder at higher dosages. It also slightly reduces water demand and increases air content in fresh concrete. Compressive
Brochure schott vials_row
The document discusses SCHOTT's products and services for pharmaceutical primary packaging. SCHOTT is a leading supplier of glass packaging for pharmaceuticals, including vials, ampoules, and syringes. They provide products at different quality levels from their StandardLine and TopLine options. The TopLine options offer customized specifications and quality levels for applications such as lyophilization and sensitive drug formulations. SCHOTT uses high-quality FIOLAX glass and has strict quality controls and inspection processes to deliver defect-free packaging solutions.
Qualifying visual inspectors
The document discusses the process for qualifying visual inspectors for pharmaceutical inspection including selecting inspectors based on vision and observation skills, extensive training using mock defect containers, and qualification testing to accurately identify defect types with acceptable error rates. It also reviews inspection parameters, defect categorization, sampling plans, and analytical techniques for investigating particulate matter found during inspection.
Prefilled syringes
This document provides an overview of prefilled syringes, including what they are, their purpose, types, materials, filling and sterilization processes, advantages and disadvantages, and some examples of marketed products. Prefill syringes are single-dose packages containing a parental drug and fixed needle provided by the manufacturer. They serve the purposes of primary packaging and a delivery system to administer the correct dose to patients. The two main types are glass-based and plastic-based systems, with plastic gaining acceptance for benefits like break resistance and decreased reactivity. Proper filling and sterilization processes are important to ensure safety and efficacy.
Seal tick leak tester
Sealtick provides Professional services in fixing your leaks.
To know more Please visit : www.sealtick.com
Ipqc tests for tablet
IPQC?
Its Need
In-Process Quality Control tests for Tablets
Hardness
Friability
Thickness
Disintegration Time
Weight variation
Content uniformity
Dissolution test
Leakage testing for strip and blister packaging
A ppt on prefilled syringes
The document discusses prefilled syringes. It describes prefilled syringes as single-dose packets of injectable drugs that have a pre-attached needle. It discusses the purpose of prefills for primary packaging and drug delivery. It also outlines the types of prefill systems using glass or plastic, describes common materials used, and the filling and sterilization processes. The document provides advantages like convenience and accuracy as well as some disadvantages. It also discusses factors driving the growth of prefilled syringes.
Blow fill seal technology
Blow fill seal technologyDr. Prashant L. Pingale GES's Sir Dr. M. S. Gosavi College of Pharmacy, Nashik
Blow Fill Seal technology is a specialized packaging technique that forms, fills, and seals containers in a continuous sterile process without human intervention. The process involves extruding plastic into a tube, molding containers, filling them with liquid, sealing the containers, and discharging the finished product. Key advantages are reduced human contact and economies of scale in packaging pharmaceutical liquids aseptically in small and large volumes for uses like injectables, respiratory products, and ophthalmic solutions.Testing/Manufacture/Tearing tester
FEC is an ISO 9001 certified company that provides world class filter testing equipment. They offer tearing testers to measure the force required to continue tearing sheet materials like paper, films, cardboard, fabrics, plastics, foil, and non-woven materials. A tearing test has been used in the paper industry for over 50 years to evaluate the strength and resistance of materials to tearing. It can rapidly determine the strength of items meant to withstand shearing loads or sharp objects. FEC tearing testers are useful for testing the strength of a variety of materials.
Aavishkar ppt.Sept
Aavishkar develops oral dissolving strips for pharmaceuticals, nutraceuticals, and oral care products. It was established in 2012 in India and strives to accelerate access to affordable advanced medicines. Its portfolio includes strips for sildenafil, tadalafil, verdinafil, rizatriptan, ondansetron, and other products that are approved or under approval/trials in various countries. Aavishkar also produces food supplement strips for curcumin, melatonin, vitamins, minerals, and other ingredients. It has a research center for developing needle-free therapies and delivering drugs through oral strips using nano-technology.
Oppi presentation
SCHOTT KAISHA is a joint venture between SCHOTT forma vitrum, a global leader in pharmaceutical glass packaging, and an Indian company. It has made large investments over time to expand production capacity of products like ampoules, vials, and syringes. SCHOTT KAISHA supplies major Indian pharmaceutical companies and exports to over 30 countries. It aims to provide a one-stop shop for customers' primary and secondary packaging needs through its partnership with SCHOTT and adherence to high quality and environmental standards.
Greyhound Chromatography 'Q fil' Syringe Filters Catalogue
Greyhound Chromatography 'Q fil' Syringe Filters CatalogueGreyhound Chromatography and Allied Chemicals
The main source of particle contamination in HPLC columns originate in the sample to be analysed. Using a syringe filter before the sample is injected into the analytical instrument ensures that the sample is at its purest before the analysis begins. Greyhound Chromatography offer a wide range of syringe filters, suitable for any sample analysis.Advanced labeling adhesives – adhesives manufacturer
Pacific Adhesives offers a line of water-based container labeling adhesives called Advanced Labeling Adhesives that are suitable for high-speed labeling machinery. Their adhesives have aggressive bonding formulas that reduce flagging and rework to save time and money, while also having low odor, easy clean up, and a long shelf life compared to other products. Pacific Adhesives' adhesives are available in various container sizes and are suitable for labeling glass, plastic, and specifically the Mustang New Jersey Labeler.
Scandinavian Clinics Estonia
Scandinavian Clinics Estonia (Steri) provides gamma sterilization services for medical and food packaging companies. Founded in 2005, it has 7 employees, treats around 600 pallets per month, and had sales revenue of 800,000 euros in 2015. Its largest markets are Sweden, Finland, Russia, and the Baltics. Located 25km from the Port of Tallinn, Estonia, the facility has irradiation chambers, loading/unloading stations, and stores products in tote boxes. It ensures quality through certifications including ISO 13485 and pricing is typically 40-75 euros per container depending on dose and product density.
pharmacopoeial standards for tablet
This document summarizes the standards and testing methods for different types of tablets according to the Indian Pharmacopoeia. It describes 10 types of tablets and the standards that apply to all tablets, including content uniformity, weight variation, disintegration, friability, and dissolution testing. The document provides details on the acceptance criteria and testing procedures for each of these standards.
Embedding
Embedding is the process of enclosing tissue specimens in an embedding medium such as paraffin wax to support the specimen for sectioning. The choice of embedding medium depends on the type of tissue, microscope, and microtome being used. Common embedding mediums include paraffin wax, celloidin, resin, and gelatin. Paraffin wax is most widely used due to its hardness and ability to produce high quality sections. Proper orientation of the specimen in the embedding block is important for pathological examination and diagnosis.
Ipqc for tablets correctd
This document discusses important quality control tests that are conducted on tablets during production. It outlines tests for hardness, friability, thickness, disintegration, weight variation, content uniformity, dissolution, and leak testing of packaging. Specific procedures and acceptance criteria are provided for each test to ensure the tablets meet standards for quality, stability, and ability to deliver the intended dose of medication. Routine quality control testing plays a key role in pharmaceutical manufacturing.
Greyhound Chromatography Q - Fil Syringe Filters 2020
Greyhound Chromatography's Q-Fil Syringe Filters set the new Quality standard for today’s laboratory syringe filters. Manufactured from the highest quality medical grade, high density polypropylene. Q-Fil Syringe Filters provide excellent chemical compatibility with acids, alcohols, bases, ethers, glycols, ketones and oils.
Every colour-coded filter is printed with details of the membrane material and its pore size on the outside of the filter and every box is labelled with the batch number making them ideal for traceability, GLPs and validation purposes.
Evaluation of capules
This document evaluates different tests performed on capsules, including stability, invariability, disintegration, dissolution, and moisture permeation tests. Stability tests evaluate the integrity of the capsule shell and determine shelf life by testing shell integrity and storage conditions. Invariability tests ensure uniform weight and drug content across capsules using weight variation and content uniformity tests. Disintegration and dissolution tests measure how quickly the capsule shell breaks down and releases its drug in water or simulated gastric fluid. Moisture permeation testing verifies the suitability of packaging for preventing moisture from affecting capsules.
Evaluation of tablets and capsule
This document provides definitions and evaluation methods for solid oral dosage forms like tablets and capsules. It defines tablets as containing an active ingredient with or without excipients prepared by molding or compression, and capsules as containing the active ingredient filled into a cap and body. It describes methods like disintegration testing using baskets, dissolution testing using paddle or basket apparatuses, content uniformity testing, weight variation testing, friability testing, and moisture permeation testing to evaluate important properties of tablets and capsules.
IITM-water purifier
This project report summarizes experiments conducted to develop a method to solidify a fluoride-removing aluminum hydroxide oxide gel into a solid block that can be used in a water purification cartridge. Initial experiments using pressurization and freeze drying resulted in a fine powder. The addition of a binder was found to be necessary to form a solid block. Experiments tested various binders including cement, silica gel, calcium oxide with sugar, and chitosan. Chitosan was found to form a solid block when crosslinked with glutaraldehyde, though it decayed after 12 hours soaking. Future work is suggested to further optimize the binder and crosslinking methods and make the final material stable in water with a
Comparative in Vitro Evaluation of Some Commercial Brands of Valsartan Tablet...
Introduction.
Justification of the study.
Problem statement.
Objectives of the study.
Materials and Methods.
Result and Discussion.
Conclusion.
Recommendation.
IPQC for capsule by akshay trivedi
Presentatio on IPQC for Capsules by Akshay Trivedi
Quality control (QC) is a process by which entities review the quality of all factors involved in production. ISO 9000 defines quality control as "A part of quality management focused on fulfilling quality requirements".[1]
This approach places an emphasis on three aspects (enshrined in standards such as ISO 9001)[2][3]:
Elements such as controls, job management, defined and well managed processes,[4][5] performance and integrity criteria, and identification of records
Competence, such as knowledge, skills, experience, and qualifications
Soft elements, such as personnel, integrity, confidence, organizational culture, motivation, team spirit, and quality relationships.
Inspection is a major component of quality control, where physical product is examined visually (or the end results of a service are analyzed). Product inspectors will be provided with lists and descriptions of unacceptable product defects such as cracks or surface blemishes for example.[3]
The quality of the outputs is at risk if any of these three aspec
Modern humans are distinguished from other species by their extensive use of tools to control and adapt to their surroundings. Early stone tools such as anvils had no holes and were not designed as interchangeable parts. Mass production established processes for the creation of parts and system with identical dimensions and design, but these processes are not uniform and hence some customers were unsatisfied with the result. Quality control separates the act of testing products to uncover defects from the decision to allow or deny product release, which may be determined by fiscal constraints.[6] For contract work, particularly work awarded by government agencies, quality control issues are among the top reasons for not renewing a contract.[7]
The simplest form of quality control was a sketch of the desired item. If the sketch did not match the item, it was rejected, in a simple Go/no go procedure. However, manufacturers soon found it was difficult and costly to make parts be exactly like their depiction; hence around 1840 tolerance limits were introduced, wherein a design would function if its parts were measured to be within the limits. Quality was thus precisely defined using devices such as plug gauges and ring gauges. However, this did not address the problem of defective items; recycling or disposing of the waste adds to the cost of production, as does trying to reduce the defect rate. Various methods have been proposed to prioritize quality control issues and determine whether to leave them unaddressed or use quality assurance techniques to improve and stabilize production.[6]
Notable approaches
Bw 30 400 DOW Membrane Catalogue
The DOW FILMTECTM BW30-400 membrane element offers consistent, high-performance reverse osmosis for water treatment. It delivers high quality permeate water while minimizing costs. The element has a wide cleaning pH range and robustness due to its polyamide thin-film composite membrane. It has a high permeate flow rate of 10,500 gallons per day and salt rejection of 99.5% under standard test conditions. The two-page document provides specifications, operating limits, and additional information for using the membrane element.
Testing/Manufacture/shore a hardness tester
FEC is an ISO 9001 certified company that sells world class filter testing equipment from their sales office in New Delhi, India. They offer Shore-A Hardness Testers, which are analog models used to test the hardness of rubber. These testers have a measurable hardness range of 0 to 100HS and come calibrated to test levels of 25, 50, and 75 Shore-A. The testers are durable, strong, and have self-calibration abilities, making them suitable for testing rubber rollers and sheets.
Testing/Manufacture/Filter End cap bond strength tester
FEC is an ISO 9001 certified company that manufactures world class testing equipment. They produce an end cap bond strength tester that tests the bond between a filter's end cap and filtration media. The tester uses a precise ball screw to steadily apply tensile force to the specimen. A high accuracy load cell detects the tensile signal and displays test results on a digital readout. Key features include a 500kg capacity, adjustable fixtures up to 200mm diameter, safety limit switches, and load cell with original microchip.
Testing/Manufacture/end cap bond strength tester
FEC is an ISO 9001 certified company that manufactures world class testing equipment. They produce an end cap bond strength tester that tests the bond between a filter's end cap and filtration media. The tester uses a precise ball screw to steadily apply tensile force to the specimen. A high accuracy load cell detects the tensile signal and displays test results on a digital readout. Key features include a 500kg capacity, adjustable fixtures up to 200mm diameter, safety limit switches, and load cell with original microchip.
More Related Content
What's hot
Ipqc tests for tablet
IPQC?
Its Need
In-Process Quality Control tests for Tablets
Hardness
Friability
Thickness
Disintegration Time
Weight variation
Content uniformity
Dissolution test
Leakage testing for strip and blister packaging
A ppt on prefilled syringes
The document discusses prefilled syringes. It describes prefilled syringes as single-dose packets of injectable drugs that have a pre-attached needle. It discusses the purpose of prefills for primary packaging and drug delivery. It also outlines the types of prefill systems using glass or plastic, describes common materials used, and the filling and sterilization processes. The document provides advantages like convenience and accuracy as well as some disadvantages. It also discusses factors driving the growth of prefilled syringes.
Blow fill seal technology
Blow fill seal technologyDr. Prashant L. Pingale GES's Sir Dr. M. S. Gosavi College of Pharmacy, Nashik
Blow Fill Seal technology is a specialized packaging technique that forms, fills, and seals containers in a continuous sterile process without human intervention. The process involves extruding plastic into a tube, molding containers, filling them with liquid, sealing the containers, and discharging the finished product. Key advantages are reduced human contact and economies of scale in packaging pharmaceutical liquids aseptically in small and large volumes for uses like injectables, respiratory products, and ophthalmic solutions.Testing/Manufacture/Tearing tester
FEC is an ISO 9001 certified company that provides world class filter testing equipment. They offer tearing testers to measure the force required to continue tearing sheet materials like paper, films, cardboard, fabrics, plastics, foil, and non-woven materials. A tearing test has been used in the paper industry for over 50 years to evaluate the strength and resistance of materials to tearing. It can rapidly determine the strength of items meant to withstand shearing loads or sharp objects. FEC tearing testers are useful for testing the strength of a variety of materials.
Aavishkar ppt.Sept
Aavishkar develops oral dissolving strips for pharmaceuticals, nutraceuticals, and oral care products. It was established in 2012 in India and strives to accelerate access to affordable advanced medicines. Its portfolio includes strips for sildenafil, tadalafil, verdinafil, rizatriptan, ondansetron, and other products that are approved or under approval/trials in various countries. Aavishkar also produces food supplement strips for curcumin, melatonin, vitamins, minerals, and other ingredients. It has a research center for developing needle-free therapies and delivering drugs through oral strips using nano-technology.
Oppi presentation
SCHOTT KAISHA is a joint venture between SCHOTT forma vitrum, a global leader in pharmaceutical glass packaging, and an Indian company. It has made large investments over time to expand production capacity of products like ampoules, vials, and syringes. SCHOTT KAISHA supplies major Indian pharmaceutical companies and exports to over 30 countries. It aims to provide a one-stop shop for customers' primary and secondary packaging needs through its partnership with SCHOTT and adherence to high quality and environmental standards.
Greyhound Chromatography 'Q fil' Syringe Filters Catalogue
Greyhound Chromatography 'Q fil' Syringe Filters CatalogueGreyhound Chromatography and Allied Chemicals
The main source of particle contamination in HPLC columns originate in the sample to be analysed. Using a syringe filter before the sample is injected into the analytical instrument ensures that the sample is at its purest before the analysis begins. Greyhound Chromatography offer a wide range of syringe filters, suitable for any sample analysis.Advanced labeling adhesives – adhesives manufacturer
Pacific Adhesives offers a line of water-based container labeling adhesives called Advanced Labeling Adhesives that are suitable for high-speed labeling machinery. Their adhesives have aggressive bonding formulas that reduce flagging and rework to save time and money, while also having low odor, easy clean up, and a long shelf life compared to other products. Pacific Adhesives' adhesives are available in various container sizes and are suitable for labeling glass, plastic, and specifically the Mustang New Jersey Labeler.
Scandinavian Clinics Estonia
Scandinavian Clinics Estonia (Steri) provides gamma sterilization services for medical and food packaging companies. Founded in 2005, it has 7 employees, treats around 600 pallets per month, and had sales revenue of 800,000 euros in 2015. Its largest markets are Sweden, Finland, Russia, and the Baltics. Located 25km from the Port of Tallinn, Estonia, the facility has irradiation chambers, loading/unloading stations, and stores products in tote boxes. It ensures quality through certifications including ISO 13485 and pricing is typically 40-75 euros per container depending on dose and product density.
pharmacopoeial standards for tablet
This document summarizes the standards and testing methods for different types of tablets according to the Indian Pharmacopoeia. It describes 10 types of tablets and the standards that apply to all tablets, including content uniformity, weight variation, disintegration, friability, and dissolution testing. The document provides details on the acceptance criteria and testing procedures for each of these standards.
Embedding
Embedding is the process of enclosing tissue specimens in an embedding medium such as paraffin wax to support the specimen for sectioning. The choice of embedding medium depends on the type of tissue, microscope, and microtome being used. Common embedding mediums include paraffin wax, celloidin, resin, and gelatin. Paraffin wax is most widely used due to its hardness and ability to produce high quality sections. Proper orientation of the specimen in the embedding block is important for pathological examination and diagnosis.
Ipqc for tablets correctd
This document discusses important quality control tests that are conducted on tablets during production. It outlines tests for hardness, friability, thickness, disintegration, weight variation, content uniformity, dissolution, and leak testing of packaging. Specific procedures and acceptance criteria are provided for each test to ensure the tablets meet standards for quality, stability, and ability to deliver the intended dose of medication. Routine quality control testing plays a key role in pharmaceutical manufacturing.
Greyhound Chromatography Q - Fil Syringe Filters 2020
Greyhound Chromatography's Q-Fil Syringe Filters set the new Quality standard for today’s laboratory syringe filters. Manufactured from the highest quality medical grade, high density polypropylene. Q-Fil Syringe Filters provide excellent chemical compatibility with acids, alcohols, bases, ethers, glycols, ketones and oils.
Every colour-coded filter is printed with details of the membrane material and its pore size on the outside of the filter and every box is labelled with the batch number making them ideal for traceability, GLPs and validation purposes.
Evaluation of capules
This document evaluates different tests performed on capsules, including stability, invariability, disintegration, dissolution, and moisture permeation tests. Stability tests evaluate the integrity of the capsule shell and determine shelf life by testing shell integrity and storage conditions. Invariability tests ensure uniform weight and drug content across capsules using weight variation and content uniformity tests. Disintegration and dissolution tests measure how quickly the capsule shell breaks down and releases its drug in water or simulated gastric fluid. Moisture permeation testing verifies the suitability of packaging for preventing moisture from affecting capsules.
Evaluation of tablets and capsule
This document provides definitions and evaluation methods for solid oral dosage forms like tablets and capsules. It defines tablets as containing an active ingredient with or without excipients prepared by molding or compression, and capsules as containing the active ingredient filled into a cap and body. It describes methods like disintegration testing using baskets, dissolution testing using paddle or basket apparatuses, content uniformity testing, weight variation testing, friability testing, and moisture permeation testing to evaluate important properties of tablets and capsules.
IITM-water purifier
This project report summarizes experiments conducted to develop a method to solidify a fluoride-removing aluminum hydroxide oxide gel into a solid block that can be used in a water purification cartridge. Initial experiments using pressurization and freeze drying resulted in a fine powder. The addition of a binder was found to be necessary to form a solid block. Experiments tested various binders including cement, silica gel, calcium oxide with sugar, and chitosan. Chitosan was found to form a solid block when crosslinked with glutaraldehyde, though it decayed after 12 hours soaking. Future work is suggested to further optimize the binder and crosslinking methods and make the final material stable in water with a
Comparative in Vitro Evaluation of Some Commercial Brands of Valsartan Tablet...
Introduction.
Justification of the study.
Problem statement.
Objectives of the study.
Materials and Methods.
Result and Discussion.
Conclusion.
Recommendation.
IPQC for capsule by akshay trivedi
Presentatio on IPQC for Capsules by Akshay Trivedi
Quality control (QC) is a process by which entities review the quality of all factors involved in production. ISO 9000 defines quality control as "A part of quality management focused on fulfilling quality requirements".[1]
This approach places an emphasis on three aspects (enshrined in standards such as ISO 9001)[2][3]:
Elements such as controls, job management, defined and well managed processes,[4][5] performance and integrity criteria, and identification of records
Competence, such as knowledge, skills, experience, and qualifications
Soft elements, such as personnel, integrity, confidence, organizational culture, motivation, team spirit, and quality relationships.
Inspection is a major component of quality control, where physical product is examined visually (or the end results of a service are analyzed). Product inspectors will be provided with lists and descriptions of unacceptable product defects such as cracks or surface blemishes for example.[3]
The quality of the outputs is at risk if any of these three aspec
Modern humans are distinguished from other species by their extensive use of tools to control and adapt to their surroundings. Early stone tools such as anvils had no holes and were not designed as interchangeable parts. Mass production established processes for the creation of parts and system with identical dimensions and design, but these processes are not uniform and hence some customers were unsatisfied with the result. Quality control separates the act of testing products to uncover defects from the decision to allow or deny product release, which may be determined by fiscal constraints.[6] For contract work, particularly work awarded by government agencies, quality control issues are among the top reasons for not renewing a contract.[7]
The simplest form of quality control was a sketch of the desired item. If the sketch did not match the item, it was rejected, in a simple Go/no go procedure. However, manufacturers soon found it was difficult and costly to make parts be exactly like their depiction; hence around 1840 tolerance limits were introduced, wherein a design would function if its parts were measured to be within the limits. Quality was thus precisely defined using devices such as plug gauges and ring gauges. However, this did not address the problem of defective items; recycling or disposing of the waste adds to the cost of production, as does trying to reduce the defect rate. Various methods have been proposed to prioritize quality control issues and determine whether to leave them unaddressed or use quality assurance techniques to improve and stabilize production.[6]
Notable approaches
Bw 30 400 DOW Membrane Catalogue
The DOW FILMTECTM BW30-400 membrane element offers consistent, high-performance reverse osmosis for water treatment. It delivers high quality permeate water while minimizing costs. The element has a wide cleaning pH range and robustness due to its polyamide thin-film composite membrane. It has a high permeate flow rate of 10,500 gallons per day and salt rejection of 99.5% under standard test conditions. The two-page document provides specifications, operating limits, and additional information for using the membrane element.
What's hot (19)
Greyhound Chromatography 'Q fil' Syringe Filters Catalogue
Greyhound Chromatography 'Q fil' Syringe Filters Catalogue
Advanced labeling adhesives – adhesives manufacturer
Advanced labeling adhesives – adhesives manufacturer
Greyhound Chromatography Q - Fil Syringe Filters 2020
Greyhound Chromatography Q - Fil Syringe Filters 2020
Comparative in Vitro Evaluation of Some Commercial Brands of Valsartan Tablet...
Comparative in Vitro Evaluation of Some Commercial Brands of Valsartan Tablet...
Similar to Testing/Manufacture/Cobb tester
Testing/Manufacture/shore a hardness tester
FEC is an ISO 9001 certified company that sells world class filter testing equipment from their sales office in New Delhi, India. They offer Shore-A Hardness Testers, which are analog models used to test the hardness of rubber. These testers have a measurable hardness range of 0 to 100HS and come calibrated to test levels of 25, 50, and 75 Shore-A. The testers are durable, strong, and have self-calibration abilities, making them suitable for testing rubber rollers and sheets.
Testing/Manufacture/Filter End cap bond strength tester
FEC is an ISO 9001 certified company that manufactures world class testing equipment. They produce an end cap bond strength tester that tests the bond between a filter's end cap and filtration media. The tester uses a precise ball screw to steadily apply tensile force to the specimen. A high accuracy load cell detects the tensile signal and displays test results on a digital readout. Key features include a 500kg capacity, adjustable fixtures up to 200mm diameter, safety limit switches, and load cell with original microchip.
Testing/Manufacture/end cap bond strength tester
FEC is an ISO 9001 certified company that manufactures world class testing equipment. They produce an end cap bond strength tester that tests the bond between a filter's end cap and filtration media. The tester uses a precise ball screw to steadily apply tensile force to the specimen. A high accuracy load cell detects the tensile signal and displays test results on a digital readout. Key features include a 500kg capacity, adjustable fixtures up to 200mm diameter, safety limit switches, and load cell with original microchip.
Testing/Manufacture/Pilling Tester Motorized
FEC is an ISO 9001 certified company that sells world class filter testing equipment from their sales office in New Delhi, India. They offer a motorized pilling tester used to determine the tendency of fabrics to form pills. The tester rubs fabric test specimens against each other under controlled conditions and the appearance is compared to standard rating photographs to grade the fabric pilling. The pilling tester has 8 test tubes, a digital display with a 5 digit preset counter, runs on a 1/4 HP geared motor at 220V/50Hz, and rotates the boxes at 60 RPM.
Testing/Manufacture/pilling tester motorized
FEC is an ISO 9001 certified company that sells world class filter testing equipment from their sales office in New Delhi, India. They offer a motorized pilling tester used to determine fabric pilling or fuzzing tendencies. The tester rubs fabric specimens against each other under controlled conditions and compares the appearance to standard rating photographs to grade fabrics. The pilling tester has 8 tubes, a digital display with a 5 digit preset counter, runs on a 1/4 HP motor at 60 RPM, and meets BS 5811 and ISO 12945-1 standards.
Testing/Manufacture/spring compression
This document provides information about a new compact universal testing machine for small spring compression from FEC, an ISO 9001 certified company. The machine has a maximum load capacity of 100 kg and maximum testing length of 100-600 mm. It has features like peak hold, digital or scale elongation measurement, motorized up and down movement, safety switches, overload protection and is designed for easy operation. The machine can be used to test springs, nonwovens, fabrics, yarns and other small products.
Testing/Manufacture/dumbbell die tester
FEC manufactures world class filter testing equipment that is ISO 9001 certified. They produce a dumbbell die and cutting press with a 1000 kg capacity that has an adjustable upper die and heavy base. The FEC cutting press uses a hydraulic system where the die is fixed above and the sample on a moving plate below is pressed upwards through the die with a hydraulic jack with a 2 ton capacity. The press has a rigid base plate finished in an autumn gray and blue paint for corrosion resistance and includes an instruction manual.
Testing/Manufacture/pancil hardness tester
FEC is an ISO 9001 certified company that sells world class filter testing equipment from their sales office in New Delhi, India. One product they offer is a Paint Scratch Hardness Tester, which is used to test the hardness of a painted surface by scratching it with a needle under an increasing load to determine the maximum load before the coating penetrates to the substrate. The tester can perform either a basic pass/fail test at a single specified load or a more detailed test by gradually increasing the load on the needle.
Testing/Manufacture/Pancil Scratch Hardness Hester
FEC is an ISO 9001 certified company that sells world class filter testing equipment from their sales office in New Delhi, India. One product they offer is a Paint Scratch Hardness Tester, which is used to test the hardness of a painted surface by scratching it with a needle under an increasing load to determine the maximum load before the coating penetrates to the substrate. The tester can perform either a basic pass/fail test at a single specified load or a more detailed test by gradually increasing the load on the needle.
Testing/Manufacture/De mattia flex tester
FEC provides testing equipment for the rubber industry, including the De Mattia Flex Tester. The Flex Tester is used to test if rubber can withstand continuous flexing without cracking. It comprises grips that hold specimen in two tiers, with one end fixed and the other end reciprocating to simulate flexing and unflexing. A motor drives an eccentric mechanism to generate the reciprocating motion while a counter tracks the number of test cycles completed. FEC also supplies molding dies, jigs, and other accessories used with the Flex Tester.
Testing/Manufacture/de mattia flex tester
FEC provides testing equipment for the rubber industry, including the De Mattia Flex Tester. The Flex Tester is used to test if rubber can withstand continuous flexing without cracking. It comprises grips that hold specimen in two tiers, with one end fixed and the other end reciprocating to simulate flexing and unflexing. A motor drives an eccentric mechanism to generate the reciprocating motion while a counter tracks the number of test cycles completed. FEC also supplies molding dies, jigs, and other accessories used with the Flex Tester.
Testing/Manufacture/Paint Scretch Hardness Tester
FEC manufactures world class filter testing equipment from their ISO 9001 certified facilities in New Delhi, India. Their paint scratch hardness tester is used to test the resistance of a painted surface to penetration from a needle by either applying a single, specified load or increasing loads to find the maximum load before penetration. The tester can determine if a sample passes or fails a test with a single load or find the critical load where the coating is penetrated.
Testing/Manufacture/paint scretch hardness tester
FEC manufactures world class filter testing equipment from their ISO 9001 certified facilities in New Delhi, India. Their paint scratch hardness tester is used to test the resistance of a painted surface to penetration or damage from scratching with a needle. The tester can apply either a single specified load or increasing loads to determine the maximum load before the coating is penetrated down to the substrate below.
Testing/Manufacture/Thickness tester
FEC is an ISO 9001 certified company that sells world class filter testing equipment from their sales office in New Delhi, India. They offer both digital and analog thickness testers. The digital thickness tester is a handy model while the analog model includes a stand. Both testers have a measurement range of 0.01 mm to 10 mm, are maintenance free, and have a lever to move the measuring point up and down.
Testing/Manufacture/Clean Room Filter
FEC manufactures a new type of leaking tester for HEPA filters that is self-developed and produced according to mist leaking test theory. The tester uses fuming particles between 0.3-0.5 um that are evenly arranged to meet the requirements for testing HEPA filter leakage. It can test a wide range of HEPA filter types, including those with and without separators, with high detection efficiency of only two seconds per filter. The device emits mist without harming operators or the environment during the detection process. It is currently the most cost-effective HEPA filter tester in the domestic market.
Testing/Manufacture/Treverse Thread Counter
FEC is an ISO 9001 certified company that sells world class filter testing equipment like digital traverse thread counters. The digital traverse thread counter can count ends and picks per inch in fabric using a microscope with a traverse length of 150mm and gauge lengths of 10mm, 20mm, 50mm, 1/2 inch, and 1 inch. It has a digital resettable counter. Technical specifications are subject to change for continuous improvement and the counter complies with relevant standards.
Testing/Manufacture/treverse thread counter
FEC is an ISO 9001 certified company that sells world class filter testing equipment like digital traverse thread counters. The digital traverse thread counter can count ends and picks per inch in fabric using a microscope with a traverse length of 150mm and gauge lengths of 10mm, 20mm, 50mm, 1/2 inch, and 1 inch. It has a digital resettable counter. Technical specifications are subject to change for continuous improvement and the counter complies with relevant standards.
Testing/Manufacture/Heel Feetigue
FEC is an ISO 9001 certified company that manufactures world class filter testing equipment. They provide a shoes heel fatigue tester that continuously impacts the heel edge of female high-heeled and middle-heeled shoes at a frequency of 60 blows per minute with an energy of 0.68 Joules per blow. The tester determines the durable quality and withstand impact index of shoe heels by testing until the heel cracks. Key specifications of the tester include a 12.5mm diameter swing arm, 57mm diameter 20mm thick impact hammer, and adjustable testing from 0 to 90 degrees down and 0 to 80 degrees left to right.
Testing/Manufacture/Heel feetigue
FEC is an ISO 9001 certified company that manufactures world class filter testing equipment. They provide a shoes heel fatigue tester, which is used to test the durability of female high-heeled and middle-heeled shoes. The tester applies a continuous impact to the heel edge at a frequency of 60 blows per minute with an energy of 0.68 Joules per blow. It tests the heel at a 90 degree angle until cracking occurs to determine the shoe's withstand impact index and durable quality of the heel. The tester has specifications like a 12.5mm diameter swing arm and 57mm diameter, 20mm thick impact hammer.
Testing/Manufacture/heel feetigue
FEC is an ISO 9001 certified company that sells world class filter testing equipment from their sales office in New Delhi, India. One product they offer is a shoes heel fatigue tester, which is used to test the durability of heels on female high-heeled and middle-heeled shoes. The tester applies a continuous impact to the heel edge at 0.68 Joules per blow, 60 blows per minute, until the heel cracks. Test results provide the heel's withstand index and determine its durable quality.
Similar to Testing/Manufacture/Cobb tester (20)
Testing/Manufacture/Filter End cap bond strength tester
Testing/Manufacture/Filter End cap bond strength tester
Testing/Manufacture/Pancil Scratch Hardness Hester
Testing/Manufacture/Pancil Scratch Hardness Hester
Recently uploaded
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaUnderstanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Recently uploaded (20)
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
2. Operations Strategy in a Global Environment.ppt
2. Operations Strategy in a Global Environment.ppt
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Testing/Manufacture/Cobb tester
- 1. FEC R World Class Filter Testing Equipments An ISO 9001 Certified Co. Description One Nose Absorption Roller One Nose Absorption Test Rings This is a method used for measuring water absorption of sized paper. A weighed test pieces of papers is placed under the cylinder. 1– ml of water is poured over the test piece. after the specified time the water ids poured off and the test piece is placed on standard blotting paper is placed on top of the test piece and the excess water is removed by means of the roller the test piece is weighed again and the result are calculated and reported. Sales Office: 9A, Gurudwara Road, Hari Vihar (Kakraula), Opp. Metro Poll No. 816, New Delhi 110043 (INDIA). Correspondence Address : Plot No. 35, K-1 Extn, Bank Wali Gali Gurudwara Road, Mohan Garden, Uttam Nager, Delhi -110059. Cell - 9811478874, 9811938703, 9212912990 E-mail - info@fecproduct.com/ inquiry_fec@yahoo.com Website - www.fecproduct.com