This document discusses challenges and opportunities in turbomachinery control. It provides an overview of compressor and gas turbine control systems, including their components and how they work. Advanced control systems integrate controllers for better performance than conventional independent PID controllers. Simulation examples show how compressors can surge during process upsets and how controls work to prevent surge by opening anti-surge valves and reducing turbine output. Overall the document focuses on improving machinery reliability and efficiency through advances in control system design.
This PPT explains the logic and requirement behind Boiler Loss of Flame Protection under MFT. To know more about Boiler Loss of Flame please connect to tahoorkhn03@gmail.com
A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled toa downstream turbine, and a combustion chamber in-between. Energy is added to the gas stream in the combustor, where fuel is mixed with air and ignited. In the high-pressure environment of the combustor, combustion of the fuel increases the temperature. The products of the combustion are forced into the turbine section
Visit https://www.topicsforseminar.com to Download
Combustion and dry low nox 2.6 dln systemFaisal Nadeem
I have explained the combustion and DLN2.6, dry low nox 2.6 + with better understanding. Trainings from Experts and my personal experience on gas turbines helps me understand the DLN 2.6 system. I hope trainee from Power Plants will like the slide. its good work of research for young trainees at Power Plants
In the hydrocarbon processing and production industry, gas is compressed for transportation to consuming markets and for use in processing operations. This presentation is about the construction and operation of compressors.
In this presentation you will learn about the construction and operation of centrifugal compressors.
This PPT explains the logic and requirement behind Boiler Loss of Flame Protection under MFT. To know more about Boiler Loss of Flame please connect to tahoorkhn03@gmail.com
A gas turbine, also called a combustion turbine, is a type of internal combustion engine. It has an upstream rotating compressor coupled toa downstream turbine, and a combustion chamber in-between. Energy is added to the gas stream in the combustor, where fuel is mixed with air and ignited. In the high-pressure environment of the combustor, combustion of the fuel increases the temperature. The products of the combustion are forced into the turbine section
Visit https://www.topicsforseminar.com to Download
Combustion and dry low nox 2.6 dln systemFaisal Nadeem
I have explained the combustion and DLN2.6, dry low nox 2.6 + with better understanding. Trainings from Experts and my personal experience on gas turbines helps me understand the DLN 2.6 system. I hope trainee from Power Plants will like the slide. its good work of research for young trainees at Power Plants
In the hydrocarbon processing and production industry, gas is compressed for transportation to consuming markets and for use in processing operations. This presentation is about the construction and operation of compressors.
In this presentation you will learn about the construction and operation of centrifugal compressors.
Energy Efficiency in Diesel Generator Operationeecfncci
Diesel generators are highly consuming equipment in Nepalese industry. This presentation explains how to operate Diesel Gensets efficiently. It was prepared for energy auditor training in Nepal in the context of GIZ/NEEP programme. For further information go to EEC webpage: http://www.eec-fncci.org
GE ADGT (Aeroderivative Gas Turbines) Products
GE코리아 뉴스레터를 구독하세요! http://goo.gl/IE8WS8
GE코리아 YouTube 채널을 구독하세요! http://goo.gl/M2gc8m
상상을 현실로 만듭니다. Imagination at work.
GE가 꿈꾸는 가치입니다. 아니, GE는 단지 꿈만 꾸고 있는 것이 아닙니다. 상상을 현실로 만들기 위해, 불가능했던 것을 가능하게 만들기 위해 쉬지 않고 움직이고 있습니다. GE는 에너지, 의료, 항공, 수송, 금융 등의 여러 분야에서 고객과 인류사회의 진보를 위해 더 편리하고 빠르며 친환경적인 솔루션을 찾아냅니다.
Connect with GE Online:
GE코리아 웹사이트: http://www.ge.com/kr/
GE리포트코리아: http://www.gereports.kr/
GE코리아 페이스북 페이지: hhttps://www.facebook.com/GEKorea
GE코리아 슬라이드쉐어: http://www.slideshare.net/GEKorea
An introduction to the concept of Cam-Less engines which replaces the conventional Cam and follower assembly with Electro -Mechanical or Electro-Hydraulic actuators controlled by PDM and ECU for better control and improving efficiency of an I.C.Engine.A theoretically simple but practically complex kit of technology which although beneficiary has its limitations and comes with a huge development and production cost.For better insight search for the same on Youtube.
https://youtu.be/XrYt1JHNmh4
An interesting take on this.
Electric motors and the systems they drive consume electrical energy more than twice as much as lighting, while lighting is typically considered a major low-lying fruit for energy reduction in a factory. It is estimated that motors account for between 43% and 46% of all global electricity consumption particularly from the manufacturing sector. The presentation will cover topics like the effort to ensure the motor efficiency in manufacturing sector; the application of variable speed drives and other factors which affect the motor efficiency such as power quality; and good maintenance regimes for energy reduction
Developing a new generation of energy efficiency products for reciprocating e...Bowman Power
Learn how a new energy efficiency product gets made, from opportunity to concept, design, validation and production, with this free presentation from the 73rd Indonesia National Electricity Day & POWER-GEN Asia. #PGASIA
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.