This document provides information on overhead electrical aluminum conductors, including ACSR (Aluminum Conductor Steel Reinforced). It describes the typical construction of ACSR, which is a stranded conductor composed of aluminum wires around a steel core. It also lists various standards that apply to these conductors. Tables are included that specify the properties of different conductor sizes and types, including HAL (hard-drawn aluminum), AAC (stranded aluminum), and ACSR.

1. OVERHEAD ELECTRICAL
ALUMINUM CONDUCTORS
Taihan Electric Wire opening up the happier
world and more enriched future

2. CC OO NN TT EE NN TT SS
OVERHEAD ELECTRICAL
ALUMINUM CONDUCTORS
Description of A.C.S.R
Typical Construction for A.C.S.R.
KS JIS KEPCO TEC
ASTM ANSI
IEC
BS AS CSA DIN
Packing and Marking
Alphabetical List
3
4
5
21
41
47
58
61
HAL, AAC, ACSR, TACSR, ACSR/AW, AWS, STACIR,
STACIR/AW,HSTACIR/AW, TACSR/AW, HTACSR/AW,
HAL-OC, ACSR-OC, ACSR/AW-OC
HAL, AAC, ACSR, ACSR/AW, AWS, AL-ALLOY, AAAC,
H.S-ACSR, HAL-OC, ACSR-OC
AAC, ACSR, ACSR/GZ, ACSR/AZ
AAC, AAAC, ACSR, AACSR/EST
2 Overhead Electrical Aluminum Conductors TAIHAN

3. Description of A.C.S.R.
Bare aluminum conductors, especially in the form of Aluminum Conductors Steel Reinforced(ACSR), have been widely used for
overhead transmission lines as the most cost-effective and dependable product.
As the name implies, ACSR is a concentrically stranded conductor composed of one or more layers of hard-drawn EC grade
aluminum wires over a high strength coated steel core. The core may be single wire or stranded, depending on the size. Because
of the numerous stranding combinations of aluminum and steel wires that may be used, it is possible to vary the portions of
aluminum and steel so as to obtain the most suitable relation between current carrying capacity and mechanical strength for each
application.
For instance, a conductor having a small proportion of steel may be most economical for a wood pole line to transmit a large block
of power whereas a conductor with a very large proportion of steel would be required for a long span crossing over water. Between
these two extremes are the conductors with normal proportions of aluminum and steel generally used for the more conventional
transmission and distribution lines.
Anti-corrosion A.C.S.R.
Anti-corrosion ACSR is used in the corrosive areas like coastal areas or industrial zones. This ACSR is filled
with anti-corrosive grease applied on the gaps between stranded wires and their external surfaces.
Generally, anti-corrosion ACSR is divided into three types according to the method of greases coating :
Light Anti-corrosion Type : Only steel wires are coated
Medium Anti-corrosion Type : All the inner layers are coated
Heavy Anti-corrosion Type : All the inner and outer layers are coated
Light Anti-corrosion Type
(ACSR-LZ)
Grease
Medium Anti-corrosion Type
(ACSR-MZ)
Grease
Heavy Anti-corrosion Type
(ACSR-HZ)
Grease
3TAIHAN Overhead Electrical Aluminum Conductors

4. Smooth Body 3 Al./ 4 St. 4 Al./ 3 St. 6 Al./ 1 St.Smooth Body
6 Al./ 7 St. 8 Al./ 7 St. 12 Al./ 7 St. 7 Al./ 1 St.8 Al./ 1 St.
16 Al./ 19 St. 18 Al./ 19 St. 21 Al./ 37 St. 18 Al./ 1 St.15 Al./ 19 St.
26 Al./ 7 St. 26 Al./ 19 St. 30 Al./ 7 St. 30 Al./ 19 St.24 Al./ 7 St.
42 Al./ 19 St. 54 Al./ 7 St. 54 Al./ 19 St.34 Al./ 19 St.
Typical Construction for A.C.S.R.
4 Overhead Electrical Aluminum Conductors TAIHAN

5. O V E R H E A D E L E C T R I C A L A L U M I N U M C O N D U C T O R S
Korean Industrial Standards
Japanese Industrial Standards
Korea Electric Power Corp. Standard
Taihan Standard
KS
JIS
KEPCO
TEC
5TAIHAN Overhead Electrical Aluminum Conductors
TAIHAN Aluminum Clad Steel Wire offers excellent
performance and advantages with improved techniques,
especially in the higher grade aluminum conductors
which are also reasonable in price
TAIHAN Aluminum Clad Steel Wire offers excellent
performance and advantages with improved techniques,
especially in the higher grade aluminum conductors
which are also reasonable in price

6. These sizes are specified in KS.
Hard-drawn Aluminum Wires for Electric Purposes
Application
This standard covers hard-drawn circular aluminum wires for electric
purposes to be used mainly as component wires of hard-drawn
aluminum stranded cables and aluminum cables steel reinforced.
Construction
Single aluminum conductor
Standards
Conforms to KS C 3111, JIS C 3108
HAL
Diameter Tolerance
on Dia.
Tensile Strength
(kgf/mm2
)
Min. (%) (%) (mm2
) (kg/km) ( /km, 20 )
Mean
(above)
Elongation
(in 250mm)
(above)
Conductivity
(above) Cross
Sectional
Area
Weight
Min.
Mean
(above)
Tensile Load
(kgf)
Electric
Resistance
Reference
(mm) (mm)
1.6
1.8
2.0
2.3
2.6
2.8
2.9
3.1
3.2
3.5
3.7
3.8
4.0
4.2
4.5
4.8
5.0
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.03
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
0.04
19.0
18.6
18.6
17.9
17.2
16.9
16.9
16.5
16.5
16.5
16.5
16.5
16.2
16.2
16.2
16.2
16.2
20.0
19.7
19.7
19.0
18.3
17.9
17.9
17.6
17.6
17.6
17.2
17.2
16.9
16.9
16.9
16.9
16.9
1.3
1.4
1.4
1.5
1.5
1.6
1.6
1.7
1.7
1.7
1.8
1.8
1.9
2.0
2.0
2.0
2.0
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
61
2.011
2.545
3.142
4.155
5.309
6.158
6.605
7.548
8.042
9.621
10.75
11.34
12.57
13.85
15.90
18.10
19.64
5.430
6.872
8.483
11.22
14.33
16.63
17.83
20.38
21.71
25.98
29.03
30.62
33.94
37.40
42.93
48.87
53.03
38.2
47.3
58.4
74.4
91.3
104
112
125
133
159
177
187
204
224
258
293
318
40.2
50.1
61.9
78.9
97.2
110
118
133
142
169
185
195
212
234
269
306
332
14.1
11.1
9.00
6.80
5.32
4.59
4.28
3.74
3.51
2.94
2.63
2.49
2.25
2.04
1.78
1.56
1.44
(Table 1)
6 Overhead Electrical Aluminum Conductors TAIHAN

7. Stranded Hard-drawn Aluminum ConductorAAC
ASTMANSIIECBSASCSADIN
Application
This standard covers stranded hard-drawn aluminum conductors to be
used mainly for overhead distribution wire, overhead feeders and
buses.
Construction
Stranded hard-drawn aluminum conductors
Standards
Conforms to KS C 3112, JIS C 3109
These sizes are specified in KS.
Nominal
Cross
Sectional
Area
No. and
Dia. of
Strands
Tensile
Load
(above)
Calculated
Cross
Sectional Area
Outside
Dia.
Weight Electric
Resistance
Hard-drawn
Copper
Equiv. Area
Standard
Length
Reference
(mm) (mm) (kgf) (mm2
) (mm) (kg/km) ( /km, 20 ) (mm2
) (m)
22
30
38
45
55
75
95
100
125
150
200
200
240
250
300
325
400
460
500
510
590
660
725
770
850
880
980
1,000
1,260
7/2.0
7/2.3
7/2.6
7/2.9
7/3.2
7/3.7
7/4.2
19/2.6
19/2.9
19/3.2
19/3.7
37/2.6
19/4.0
37/2.9
37/3.2
61/2.6
37/3.7
37/4.0
61/3.2
37/4.2
61/3.5
61/3.7
91/3.2
61/4.0
61/4.2
91/3.5
91/3.7
127/3.2
91/4.2
369
469
576
699
838
1,120
1,410
1,560
1,900
2,270
3,030
3,050
3,490
3,700
4,430
5,020
5,890
6,760
7,300
7,460
8,730
9,720
10,890
11,140
12,300
13,020
14,500
15,200
18,350
21.99
29.09
37.16
46.24
56.29
75.25
96.95
100.9
125.5
152.8
204.3
196.4
238.8
244.4
297.6
323.8
397.8
465.1
490.6
512.5
586.9
655.8
731.8
766.8
844.9
875.5
978.3
1,021
1,260
6.0
6.9
7.8
8.7
9.6
11.1
12.6
13.0
14.5
16.0
18.5
18.2
20.0
20.3
22.4
23.4
25.9
28.0
28.8
29.4
31.5
33.3
35.2
36.0
37.8
38.5
40.7
41.6
46.2
60.09
79.40
101.5
126.3
153.8
205.6
264.9
276.4
343.9
418.7
559.8
541.3
654.5
673.6
820.1
894.2
1,097
1,282
1,355
1,413
1,621
1,812
2,027
2,118
2,334
2,426
2,716
2,840
3,499
1.301
0.984
0.769
0.619
0.507
0.380
0.295
0.284
0.229
0.188
0.140
0.147
0.120
0.118
0.0969
0.0892
0.0726
0.0621
0.0589
0.0563
0.0493
0.0441
0.0396
0.0377
0.0342
0.0331
0.0297
0.0285
0.0230
14
18
23
29
35
47
60
63
79
96
128
124
150
154
187
204
250
292
309
322
369
412
460
482
531
551
615
642
792
2,000
1,800
1,800
1,000
1,000
1,900
1,000
2,400
2,000
1,500
1,300
2,400
1,300
2,000
1,500
1,200
1,300
1,000
800
1,300
1,350
1,300
800
1,000
1,300
700
600
800
600
(Table 2)
KSJISKEPCOTEC
7TAIHAN Overhead Electrical Aluminum Conductors

8. Application
This standard covers aluminum stranded conductors steel reinforced
which could withstand high tensile load to be used mainly for overhead
transmission lines, overhead distribution lines.
Construction
The center wire or wires are of galvanized steel and the outer layer or
layers of aluminum.
Standards
Conforms to KS C 3113, JIS C 3110
These sizes are specified in KS.
Nominal
Cross
Sectional
Area
No. and Dia.
of Strands
(No./mm)
Tensile
Load
(above)
( /km, 20 ) (mm2
) (m)(kgf)
Calculated Cross
Sectional Area
(mm2
)
Outside Dia.
(mm)
Weight Electric
Resistance
Hard-drawn
Copper
Equiv. Area
Standard
Length
Reference
(mm2
) Al Al AlSt St St (kg/km)
12
15
19
25
32
38
40
48
50
58
64
65
75
79
80
95
97
110
120
120
140
160
170
200
210
240
250
280
290
290
320
330
330
360
380
6/1.6
6/1.8
6/2.0
6/2.3
6/2.6
12/2.0
6/2.9
6/3.2
12/2.3
6/3.5
12/2.6
6/3.7
6/4.0
12/2.9
6/4.2
6/4.5
12/3.2
26/2.3
12/3.5
30/2.3
26/2.6
30/2.6
26/2.9
30/2.9
26/3.2
30/3.2
26/3.5
26/3.7
54/2.6
30/3.5
30/3.7
54/2.8
26/4.0
54/2.9
30/4.0
1/1.6
1/1.8
1/2.0
1/2.3
1/2.6
7/2.0
1/2.9
1/3.2
7/2.3
1/3.5
7/2.6
1/3.7
1/4.0
7/2.9
1/4.2
1/4.5
7/3.2
7/1.79
7/3.5
7/2.3
7/2.0
7/2.6
7/2.25
7/2.9
7/2.5
7/3.2
7/2.7
7/2.9
7/2.6
7/3.5
7/3.7
7/2.8
7/3.1
7/2.9
19/2.4
448
567
698
907
1,140
3,250
1,400
1,660
4,340
1,980
5,510
2,220
2,510
6,820
2,770
3,180
8,050
3,963
9,590
5,550
4,810
6,990
5,980
8,620
7,240
10,210
8,590
9,780
8,820
12,170
13,630
10,290
10,930
10,920
15,920
12.07
15.27
18.85
24.93
31.85
37.70
39.63
48.25
49.86
57.73
63.71
64.50
75.42
79.26
83.10
95.40
96.50
108.0
115.5
124.7
138.0
159.3
171.7
198.2
209.1
241.3
250.1
279.5
286.7
288.6
322.5
332.5
326.8
356.7
377.1
2.011
2.545
3.142
4.155
5.309
21.990
6.605
8.042
29.080
9.621
37.16
10.75
12.57
46.24
13.85
15.90
56.29
17.61
67.35
29.09
21.99
37.16
27.83
46.24
34.36
56.29
40.08
46.24
37.16
67.35
75.25
43.11
52.84
46.24
85.96
4.8
5.4
6.0
6.9
7.8
10.0
8.7
9.6
11.5
10.5
13.0
11.1
12.0
14.5
12.6
13.5
16.0
14.57
17.5
16.1
16.4
18.2
18.35
20.3
20.3
22.4
22.1
23.5
23.4
24.5
25.9
25.2
25.3
26.1
28.0
1.6
1.8
2.0
2.3
2.6
6.0
2.9
3.2
6.9
3.5
7.8
3.7
4.0
8.7
4.2
4.5
9.6
5.37
10.5
6.9
6.0
7.8
6.75
8.7
7.5
9.6
8.1
8.7
7.8
10.5
11.1
8.4
9.3
8.7
12.0
48.73
61.66
76.12
100.7
128.6
390.4
160.0
194.8
365.2
233.1
466.5
260.5
304.6
580.4
335.5
385.2
706.8
437.4
845.6
573.7
554.7
732.8
693.8
911.7
848.5
1,110
1,007
1,137
1,086
1,328
1,484
1,260
1,320
1,351
1,721
2.374
1.878
1.52
1.150
0.899
0.7647
0.723
0.593
0.5775
0.497
0.452
0.444
0.380
0.364
0.345
0.301
0.301
0.2669
0.250
0.233
0.210
0.182
0.169
0.147
0.319
0.120
0.116
0.104
0.1006
0.101
0.0900
0.0873
0.0888
0.0814
0.0770
8
10
12
16
20
24
25
30
31
36
40
41
47
50
52
60
60
70
73
78
90
100
110
125
130
152
160
176
180
180
203
210
206
220
240
2,200
1,700
1,000
1,050
1,000
1,400
1,550
1,250
1,050
1,000
950
1,250
1,100
1,500
1,000
1,300
1,250
1,250
1,000
1,300
1,450
1,900
1,250
1,400
2,000
1,400
1,750
1,500
1,650
1,000
1,250
1,600
1,000
1,300
1,100
(Table 3)
Galvanized steel
Aluminum conductor
Aluminum Conductors, Steel ReinforcedHCSR
8 Overhead Electrical Aluminum Conductors TAIHAN

9. ASTMANSIIECBSASCSADINKSJISKEPCOTECASTMANSIIECBSASCSADINKSJISKEPCOTEC
Remarks
1. The values of Table are those at 20 .
2. The values of calculated sectional area, outside diameter and weight are those for the standard diameters of individual wires. The electric
resistance is calculated for the standard diameter, by assuming the conductivity of the hard-drawn aluminum wires at 61% and neglecting
the galvanized steel wires.
3. The sectional area of hard-drawn copper stranded conductor with equivalent resistance is calculated by assuming the conductivity of the
hard-drawn copper wires at 97% and that of the hard-drawn aluminum wires for electric purposes at 61% and neglecting the length increase
by stranding.
4. The ratio of length increase by stranding to be used for calculating the weight and electric resistance shall be as follows :
5. The tensile load is calculated as 90% of the sum of the minimum tensile load of hard-drawn aluminum wire for electric purposes multiplied
by the number of aluminum component wires and tensile load of galvanized steel wire multiplied by the number of steel component wires.
54
30
26
2
7
7
7
1
2.7
2.7
2.6
1.4
0.5
0.5
0.5
0
Construction of Cable
Aluminum Wires Steel Wires Aluminum Wires Steel Wires
Ratio of Length lncrease by Stranding(%)
These sizes are specified in KS.
Nominal
Cross
Sectional
Area
No. and Dia.
of Strands
(No./mm)
Tensile
Load
(above)
( /km, 20 ) (mm2
) (m)(kgf)
Calculated Cross
Sectional Area
(mm2
)
Outside Dia.
(mm)
Weight Electric
Resistance
Hard-drawn
Copper
Equiv. Area
Standard
Length
Reference
(mm2
) Al Al AlSt St St (kg/km)
410
410
420
430
430
480
480
480(Cardinal)
510
520
580
590
610
680
690
750
810
860
950
1,160
26/4.5
54/3.1
30/4.2
54/3.2
26/4.6
30/4.5
45/3.7
54/3.38
26/5.0
54/3.5
72/3.2
30/5.0
54/3.8
54/4.0
72/3.5
54/4.2
84/3.5
54/4.5
84/3.8
84/4.2
7/3.5
7/3.1
19/2.5
7/3.2
7/3.6
19/2.7
7/2.47
7/3.38
7/3.9
7/3.5
19/3.2
19/3.0
7/3.8
19/2.4
37/2.5
19/2.5
7/3.5
19/2.7
7/3.8
7/4.2
13,890
12,270
17,380
12,980
14,610
20,160
11,800
15,300
17,210
15,600
26,440
24,300
18,150
20,310
32,060
22,220
19,900
25,710
23,100
27,830
413.4
407.6
415.5
434.3
432.1
477
483.84
484.53
510.6
519.5
579.0
589.2
612.4
678.6
692.7
748.1
808.2
858.6
952.6
1,163.7
67.35
52.84
93.27
59.29
71.26
108.80
33.54
62.81
83.62
67.35
152.80
134.3
79.38
85.95
181.6
93.27
67.35
108.8
79.38
96.98
28.5
27.9
29.4
28.8
29.2
31.5
29.61
30.42
31.7
31.5
35.2
35.0
34.2
36.0
38.5
37.8
38.5
40.5
41.8
46.2
10.5
9.3
12.5
9.6
10.8
13.5
7.41
10.14
11.7
10.5
16.0
15.0
11.4
12.0
17.5
12.5
10.5
13.5
11.4
12.6
1,673
1,544
1,885
1,645
1,756
2,178
1,599
1,836
2,071
1,969
2,605
2,689
2,320
2,557
3,352
2,807
2,769
3,236
3,264
3,986
0.0702
0.0712
0.0698
0.0664
0.0671
0.0609
0.05994
0.05990
0.0568
0.0559
0.0498
0.0493
0.0474
0.0428
0.0416
0.0388
0.0359
0.0339
0.0304
0.0249
260
255
261
270
272
300
304
305
321
327
360
371
385
430
440
470
-
540
-
-
1,000
1,300
1,400
1,100
1,350
850
1,000
1,000
1,100
1,000
700
1,000
1,000
800
600
1,000
-
600
-
-
(Table 3)
9TAIHAN Overhead Electrical Aluminum Conductors

10. Aluminum Conductors, Steel Reinforced -Galvanized Steel WiresACSR
These sizes are specified in KS.
Application
This standard covers aluminum stranded conductors steel reinforced
which could withstand high tensile load to be used mainly for overhead
transmission lines, overhead distribution lines.
Construction
The center wire or wires are of galvanized steel and the outer layer or
layers of aluminum.
Standards
Conforms to KS C 3113, JIS C 3110
Diameter Tolerance
on Dia.
Min.
Tensile
Strength
Min.
Elongation
(kgf/mm2
) (%) (times) (g/m2
) (mins) (kg/km) (kgf)(mm2
)
No. of
Twisting Min.
Coating
Weight
Unformity Winding WeightCalculated
Cross
Sectional Area
Tensile
Load
Galvanizing Test Reference
(mm) (mm)
1.8
2.0
2.25
2.3
2.4
2.5
2.6
2.7
2.9
3.0
3.1
3.2
3.5
3.6
3.7
3.8
3.9
4.0
4.2
4.5
0.04
0.04
0.05
0.05
0.05
0.05
0.05
0.05
0.06
0.06
0.06
0.06
0.07
0.07
0.07
0.07
0.07
0.08
0.08
0.09
140
135
135
135
135
135
135
135
135
130
130
130
130
130
130
130
130
125
125
125
3.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.5
4.5
4.5
4.5
4.5
4.5
4.5
4.5
5.0
5.0
5.0
20
20
20
20
20
20
20
20
16
16
16
16
16
16
16
16
16
16
16
16
200
215
230
230
230
230
230
230
245
245
245
245
260
260
260
260
260
275
275
275
2
2
2
2
2
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
No
marked
crack
shall
develop
on the
coating
layer
of test
piece
2.545
3.142
3.976
4.155
4.524
4.909
5.309
5.726
6.605
7.069
7.548
8.042
9.621
10.18
10.75
11.34
11.95
12.57
13.85
15.90
19.85
24.51
31.01
32.41
35.29
38.29
41.41
44.66
51.52
55.14
58.87
62.73
75.04
79.40
83.85
88.45
93.21
98.05
108.0
124.0
356
424
537
561
611
663
719
773
892
919
981
1,050
1,250
1,320
1,400
1,470
1,550
1,570
1,730
1,988
(Table 4)
Galvanized steel
Aluminum conductor
10 Overhead Electrical Aluminum Conductors TAIHAN

11. ASTMANSIIECBSASCSADINKSJISKEPCOTEC
TACSR
SB : Smoth body
Application
This standard covers aluminum-alloy stranded conductors steel
reinforced which could withstand high tensile load to be used mainly
for overhead transmission lines, overhead distribution lines.
Construction
The center wire or wires are of galvanized steel and the outer layer
or layers of aluminum-alloy.
Standards
Conforms to TEC, JEC 3406
Thermal-resistant Aluminum - alloy Conductor Steel Reinforced
Nominal
Cross
Sectional
Area
No. and Dia.
of Strands
(No./mm)
Min.
Tensile
Load
Calculated Cross
Sectional Area
(mm2
)
Outside Dia.
(mm)
Weight Electric
Resistance
Standard
Length
Reference
(mm2
) (kgf)Al-alloy Al-alloy St Al-alloy St (kg/km) (m)( /km, 20 )St
160
240
330
410
480
610
680
810
30/2.6
30/3.2
26/4.0
26/4.5
45/3.7
54/3.8
45/4.4
45/4.8
7/2.6
7/3.2
7/3.1
7/3.5
7/2.47
7/3.8
7/2.9
7/3.2
6,970
10,210
10,950
13,910
11,260
18,350
15,590
18,450
159.3
241.3
326.8
413.4
483.8
612.4
684.5
814.5
37.16
56.29
52.84
67.35
33.54
79.38
46.24
56.29
18.2
22.4
25.3
28.5
29.61
34.2
35.1
38.4
7.8
9.6
9.3
10.5
7.41
11.4
8.7
9.6
732.8
1,110
1,320
1,673
1,599
2,320
2,260
2,700
0.185
0.122
0.0904
0.0714
0.0610
0.0481
0.0431
0.0363
2,000
2,000
1,600
1,300
2,000
1,600
1,400
1,200
(Table 5)
Smooth Body ACSR(Taihan Standard)
Nominal
Cross
Sectional
Area
Construction Outside
Dia.
Min.
Tensile
Strength
Weight
(kg/km)
Electric
Resistance
Hard-drawn
Copper
Equiv. Area
Standard
Length
Reference
(No./shape) (No./mm)(mm2
) (mm) (kgf/mm2
) (mm2
) (m)( /km, 20 )
Al
Al St Total
St
12
19
25
32
58
95
120
6/SB
6/SB
6/SB
6/SB
6/SB
6/SB
6/SB
1/1.6
1/2.0
1/2.3
1/2.6
1/3.5
1/3.5
1/4.2
4.4
5.5
6.3
7.2
9.7
12.0
13.6
460
698
907
1,140
1,980
2,510
3,300
33.04
52.33
68.89
88.09
159.7
261.7
330.5
15.69
24.51
32.41
41.41
75.04
75.04
108.0
48.73
76.84
101.3
129.5
234.7
336.7
438.5
2.40
1.52
1.15
0.901
0.497
0.303
0.240
3.2mm
4.0mm
14
5.0mm
28
60
80
-
900
900
900
600
300
300
(Table 6)
Anti-corrosion ACSR : ACSR-LZ, ACSR-MZ, ACSR-HZ(Taihan Standard)
Nominal
Cross
Sectional
Area
No. and Dia.
of Strands
(No./mm)
Max.
Tensile
Load
Calculated Cross
Sectional Area
(mm2
)
Outside Dia.
(mm)
Weight
(kg/km)
Electric
Resistance
Standard
Length
Reference
Al St Al St Al St Light Medium Heavy ( /km, 20 ) (m)(mm2
) (kgf)
120
160
200
240
330
410
520
610
30/2.3
30/2.6
30/2.9
30/3.2
26/4.0
26/4.5
54/3.5
54/3.8
7/2.3
7/2.6
7/2.9
7/3.2
7/3.1
7/3.5
7/3.5
7/3.8
5,550
6,900
8,620
10,210
10,930
13,890
15,600
18,150
124.7
159.3
198.2
241.3
326.8
413.4
519.5
612.4
29.09
37.16
46.24
56.29
52.84
67.35
67.35
79.38
16.1
18.2
20.3
22.4
25.3
28.5
31.5
34.2
6.9
7.8
8.7
9.6
9.3
10.5
10.5
11.4
580.9
742.0
923.1
1,124
1,333
1,690
1,986
2,340
593.6
758.2
943.4
1,149
1,367
1,733
2,059
2,426
616.7
787.7
980.0
1,193
1,430
1,813
2,132
2,513
0.233
0.182
0.147
0.120
0.0888
0.0702
0.0559
0.0474
1,200
2,000
2,000
1,800
1,300
1,000
1,400
1,200
(Table 7)
Galvanized steel
Aluminum conductor
11TAIHAN Overhead Electrical Aluminum Conductors

12. Conductor shall be high strength Al-clad steel core wire.
Application
This standard covers aluminum stranded conductors aluminum-clad
steel reinforced which could withstand high tensile load to be used
mainly for overhead transmission lines, overhead distribution lines.
Construction
The center wire or wires are of aluminum-clad steel and the outer layer
or layers of aluminum.
Standards
Conforms to KEPCO specification
Nominal
Cross
Sectional
Area
No. and Dia.
of Strands
(No/mm)
Tensile
Load
(above)
Calculated Cross
Sectional Area
(mm2
)
Outside Dia.
(mm)
Al Aw Al Aw Al Aw
Weight Electric
Resistance
Hard-drawn
Copper
Equiv. Area
Standard
Length
Reference
(mm2
) (kgf) (kg/km) (mm2
) (m)( /km, 20 )
32
58
65
95
97
120
160
240
330
410
480(Cardinal)
480
520
6/2.6
6/3.5
12/2.6
6/4.5
12/3.2
12/3.5
30/2.6
30/3.2
26/4.0
26/4.5
54/3.38
45/3.7
54/3.5
1/2.6
1/3.5
7/2.6
1/4.5
7/3.2
7/3.5
7/2.6
7/3.2
7/3.1
7/3.5
7/3.38
7/2.47
7/3.5
1,140
1,980
5,415
3,180
10,600
9,590
6,990
10,210
10,930
13,890
15,300
11,800
15,600
31.85
57.73
63.71
95.40
96.50
115.45
159.30
241.30
326.80
413.40
484.53
483.84
519.50
5.31
9.62
37.17
15.90
56.29
67.35
37.16
56.29
52.84
67.35
62.81
33.54
67.35
7.8
10.5
13.0
13.5
16.0
17.5
18.2
22.4
25.3
28.5
30.42
29.61
31.5
2.6
3.5
7.8
4.5
9.6
10.5
7.8
9.6
9.3
10.5
10.14
7.41
10.5
120.6
299.7
401.0
362.0
608.0
737.0
676.4
1,024
1,239
1,578
1,760
1,544
1,848
0.85200
0.47100
0.38000
0.28500
0.29500
0.21000
0.16900
0.11100
0.08420
0.06650
0.05740
0.05860
0.05360
21
38
48
63
62
86
108
163
216
273
318
310
340
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
(Table 8)
Conductor shall be high strength Al-clad steel core wire.
Nominal Cross
Sectional Area ACSR/GW
(kg/km)
ACSR/AW
(kg/km)
GW/AW
(Ratio)
ACSR/GW
( /km, 20 )
ACSR/AW
( /km, 20 )
GW/AW
(Ratio)
Weight Conductor Resistance
(mm2
)
32
58
65
95
97
120
160
240
330
410
480(Cardinal)
480
520
128.6
233.1
465.0
385.1
708.9
845.9
732.8
1,100
1,320
1,673
1,836
1,599
1,969
120.6
219.7
401.0
362.0
608.0
737.0
676.4
1,024
1,239
1,578
1,760
1,544
1,848
1.066
1.061
1.160
1.064
1.116
1.148
1.083
1.084
1.065
1.060
1.043
1.036
1.065
0.89900
0.49700
0.45650
0.30100
0.30100
0.25000
0.18200
0.12000
0.0880
0.07020
0.05990
0.05994
0.05590
0.85200
0.47100
0.38000
0.28500
0.29500
0.21000
0.16900
0.11100
0.08420
0.06650
0.05740
0.05860
0.05360
1.05
1.05
1.20
1.05
1.02
1.19
1.07
1.08
1.05
1.05
1.04
1.02
1.04
(Table 9)
Aluminum-clad steel
Aluminum conductor
Comparison of ACSR with ACSR/AW
Aluminum Conductors, Aluminum-clad Steel ReinforcedACSR/AW
12 Overhead Electrical Aluminum Conductors TAIHAN

13. Conductor shall be high strength Al-clad steel core wire.
Diameter Tolerance
on Dia.
Tensile
Strength
(above)
Elongation
(above)
Conductivity
(above)
No. of
Twisting
AI
Thickness
(above)
Winding
Calculated
Cross
Sectional Area
Electric
Resistance
Weight
Reference
(mm) (mm) (kgf/mm2
) (%) (%) (times) (mm) ( /km, 20 )(mm2
) (kg/km)
2.47
2.6
3.1
3.2
3.2
3.38
3.5
4.5
0.05
0.05
0.06
0.06
0.06
0.07
0.07
0.09
135
135
130
130
160
144
130
125
1.5
1.5
1.5
1.5
1.5
1.5
1.5
1.5
20.3
20.3
20.3
20.3
14.0
20.3
20.3
20.3
20
20
16
16
20
16
16
16
0.10
0.13
0.15
0.15
0.07
0.15
0.15
0.20
No marked
crack shall
develop
on the
coating
layer of
test piece
4.791
5.309
7.548
8.042
8.042
8.973
9.621
15.90
17.72
16.0
11.3
10.6
15.3
9.47
8.83
5.34
31.58
34.99
49.74
53.00
57.42
59.13
63.40
104.81
(Table 10)
Aluminum
Steel
ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Aluminum-clad Steel Wires(Reference Spec. ASTM B-415)
13TAIHAN Overhead Electrical Aluminum Conductors

14. Stranded Aluminum-clad Steel ConductorAWS
Application
This standard covers stranded aluminum-clad steel conductors to be
used mainly for overhead ground wire.
Construction
Stranded aluminum-clad conductor
Standards
Conforms to KEPCO specification
Nominal
Cross
Sectional
Area
No. and
Dia.
of Strands
Conductivity
(above)
Tensile
Load
(above)
(mm2
) (mm) (kg/km) ( /km, 20 ) (m)
Calculated
Cross
Sectional Area
Outside Dia. Weight Electric
Resistance
Standard
Length
Reference
(mm2
) (No./mm) (%) (kgf)
55
70
100
125
200
200
7/3.2
7/3.5
19/2.6
19/2.9
19/3.7
19/3.7
20.3
20.3
40
20.3
40
30
6,870
8,190
6,360
15,480
12,870
16,547
56.29
67.35
100.9
125.5
204.3
204.3
9.6
10.5
13.0
14.5
18.5
18.5
371.2
444.2
474.5
842
961
1,162
1.530
1.270
0.433
0.682
0.214
0.285
2,000
2,000
2,000
2,000
2,000
2,000
(Table 11)
Aluminum-clad Steel Wires
Diameter Tolerance
on Dia.
Tensile
Strength
(above)
Elongation
(above)
Conductivity
(above)
No. of
Twisting
(above)
Al
Thickness
(above)
Winding
Calculated
Cross
Sectional Area
(mm2
)
Weight
(kg/km)
Electric
Resistance
( /km, 20 )
Reference
(mm) (mm) (kgf/mm2
) (%) (%) (times) (mm)
2.6
2.9
3.2
3.5
3.7
3.7
0.05
0.038
0.06
0.07
0.07
0.07
70
137
130
130
70
90
1.5
1.5
1.5
1.5
1.5
1.5
40
20.3
20.3
20.3
40
30
20
20
16
16
16
16
0.33
0.15
0.15
0.15
0.47
0.30
No marked
crack shall
develop on
the coating
layer of
test piece
5.309
6.605
8.042
9.621
10.752
10.752
372
205
1,050
1,250
753
968
24.63
43.50
53.00
63.40
49.89
60.32
(Table 12)
Aluminum
Steel
Aluminum
Steel
14 Overhead Electrical Aluminum Conductors TAIHAN

15. ASTMANSIIECBSASCSADINKSJISKEPCOTEC
STACIR Super Thermal-resistant Aluminum-alloy Conductors,
lnvar-reinforced
Application
This standard covers super thermal-resistant aluminum-alloy stranded
conductors galvanized invar reinforced to be used mainly for overhead
transmission lines.
Construction
The center wires are of galvanized invar and the outer layers of super
thermal-resistant aluminum-alloy.
Standards
Conforms to KEPCO specification
Nominal
Cross
Sectional
Area
No. and
Dia. of
Strands
(No./mm)
Tensile
Load
(above)
Calculated
Cross Sectional
Area
(mm2
)
Outside Dia.
(mm)
Weight Electric
Resistance
Up to
Transition
Point
Temper-
ature
Above
Transition
Point
Temper-
ature
Up to
Transition
Point
Temper-
ature
Above
Transition
Point
Temper-
ature
Modulus of
Elasticity
(kg/mm2
)
Coefficient of
Linear Expansion
(X10-6
/ )
Standard
Length
Reference
(mm2
) (kgf) (kg/km) (m)
( /km,
20 )
ST-Al
Alloy
lnvar
ST-Al
Alloy
lnvar
ST-Al
Alloy
lnvar
240
330
410
480
Continuous
Emergency
Short Circuit
90
120
180
150
180
260
210
240
280
30/3.2
26/4.0
26/4.5
45/3.70
7/3.2
7/3.1
7/3.5
7/2.47
9,170
10,000
12,720
10,500
241.3
326.8
413.4
483.84
56.29
52.84
67.35
33.54
22.4
25.3
28.5
29.61
9.6
9.3
10.5
7.41
1,122
1,330
1,687
1,611
0.1220
0.0904
0.0714
0.0607
8,230
7,720
7,730
6,960
16,500
16,500
16,500
16,500
15.3
17.0
17.0
19.8
3.6
3.6
3.6
3.6
2,000
2,000
2,000
2,000
(Table 13)
Maximum Operating Temperature( ) ACSR TACSR STACIR
Maximum Operating Temperature
Continuous
Emergency
1.00
1.00
1.55~1.62
1.33~1.36
1.94~2.06
1.60~1.67
Current Capacity lncreasing Ratio ACSR TACSR STACIR
Current Capacity Increasing Ratio
Galvanized invar
Super thermal-resistant
aluminum-alloy conductor
15TAIHAN Overhead Electrical Aluminum Conductors

16. Super Thermal-resistant Aluminum-alloy Conductors,
Aluminum-clad Invar-reinforcedSTACIR/AW
HSTACIR/AW
Application
This standard covers super thermal-resistant aluminum-alloy stranded
conductors aluminum-clad invar reinforced to be used mainly for
overhead transmission lines.
Construction
The center wires are of aluminum-clad invar and the outer layers of
super thermal-resistant aluminum-alloy.
Standards
Conforms to KEPCO specification
Aluminum-clad invar
Super thermal-resistant
aluminum-alloy conductor
Nominal
Cross
Sectional
Area
No. and Dia.
of Strands
(mm)
Tensile
Load
(above)
Calculated
Cross Sectional
Area
(mm2
)
Outside Dia.
(mm)
Weight Electric
Resistance
Up to
Transition
Point
Temper-
ature
Above
Transition
Point
Temper-
ature
Up to
Transition
Point
Temper-
ature
Above
Transition
Point
Temper-
ature to
230
Above
230
Modulus of Elasticity
(kg/mm2
)
Coefficient of Linear Expansion
(X10-6
/ )
Standard
Length
Reference
(mm2
) (kgf) (kg/km) (m)
( /km,
20 )
ST-Al
Alloy
Al-clad
lnvar
ST-Al
Alloy
ST-Al
Alloy
Al-clad
lnvar
Al-clad
lnvar
240
330
410
480
30/3.2
26/4.0
26/4.5
45/3.70
7/3.2
7/3.1
7/3.5
7/2.47
9,170
10,000
12,720
10,500
241.3
326.8
413.4
483.84
56.29
52.84
67.35
33.54
22.4
25.3
28.5
29.61
9.6
9.3
10.5
7.41
1,070
1,285
1,625
1,580
0.1159
0.0869
0.0686
0.0600
8,040
7,580
7,580
6,900
15,500
15,500
15,500
15,500
16.0
17.5
17.5
20.0
3.7
3.7
3.7
3.7
10.8
10.8
10.8
10.8
2,000
2,000
2,000
2,000
(Table 14)
High-strength Super Thermal-resistant Alluminum-alloy Conductors
Aluminum-clad Invar Reinforced
Application
This standard cover High-strength super thermal-resistant aluminum-
alloy stranded conductors aluminum-clad invar reinforced to be used
mainly for overhead transmission lines.
Construction
The center wires are of aluminum-clad high strength invar and the
outer layers of super thermal-resistant aluminum-alloy.
Standards
Conforms to KEPCO specification
Aluminum-clad
high strength inver
Super thermal-resistant
aluminum-alloy conductor
Nominal
Cross
Sectional
Area
No. and Dia.
of Strands
(mm)
Tensile
Load
(above)
Calculated Cross
Sectional Area
(mm2
)
Outside Dia.
(mm)
Weight Electric
Resistance
Up to
Transition
Point
Temper-
ature
Above
Transition
Point
Temper-
ature
Up to
Transition
Point
Temper-
ature
Above
Transition
Point
Temper-
ature to
230
Above
230
Modulus of Elasticity
(kg/mm2
)
Coefficient of Linear Expansion
(X10-6
/ )
Standard
Length
Reference
(mm2
) (kgf) (kg/km) (m)
( /km,
20 )
ST-Al
Alloy
Al-clad
High-
Strength
lnvar
ST-Al
Alloy
ST-Al
Alloy
Al-clad
High-
Strength
lnvar
Al-clad
High-
Strength
lnvar
240
330
410
480
30/3.2
26/4.0
26/4.5
45/3.7
7/3.2
7/3.1
7/3.5
7/2.47
9,700
10,500
13,300
11,000
241.3
326.8
413.5
483.8
56.29
52.84
67.35
33.54
22.4
25.3
28.5
29.61
9.6
9.3
10.5
7.41
1,070
1,285
1,625
1,580
0.1159
0.0869
0.0686
0.0600
8,041
7,581
7,589
6,896
15,500
15,500
15,500
15,500
15.96
17.51
17.48
20.19
3.7
3.7
3.7
3.7
10.8
10.8
10.8
10.8
2,000
2,000
2,000
2,000
(Table 15)
16 Overhead Electrical Aluminum Conductors TAIHAN

17. ASTMANSIIECBSASCSADINKSJISKEPCOTEC
HTACSR/AW
TACSR/AW Thermal-resistant Aluminum-alloy Conductors,
Aluminum-clad Steel-reinforced
Application
This standard covers thermal-resistant aluminum-alloy stranded
conductors aluminum-clad steel reinforced to be used mainly for
overhead transmission lines.
Construction
The center wires are of aluminum-clad steel and the outer layers of
thermal-resistant aluminum-alloy.
Standards
Conforms to KEPCO specification
Aluminum-clad steel
Thermal-resistant
aluminum-alloy conductor
Nominal
Cross
Sectional
Area
No. and Dia.
of Strands
(No./mm)
Tensile
Load
(above)
Calculated Cross
Sectional Area
(mm2
)
Outside Dia.
(mm)
Weight Electric
Resistance
Standard
Length
Reference
(mm2
) (kgf)Al-alloy Al-alloy AW Al-alloy AW (kg/km) (m)( /km, 20 )AW
480
(Rail)
45/3.7 7/2.47 11,260 483.84 33.54 29.61 7.41 1,561 0.0596 2,000
(Table 16)
High-Strength, Thermal-resistant Aluminum-alloy Conductors,
Aluminum-clad Steel Reinforced
Application
This standard covers high-strength, thermal-resistant aluminum-alloy
stranded conductors aluminum-clad steel reinforced which could
withstand extra high tensile load to be used mainly for overhead
transmission lines.
Construction
The center wires are of aluminum-clad steel and the outer layers of
high-strength, themal-resistant aluminum-alloy.
Standards
Conforms to KEPCO specification
Aluminum-clad steel
High-strength, thermal-resistant
aluminum-alloy conductor
Nominal
Cross
Sectional
Area
No. and Dia.
of Strands
(No./mm)
Tensile
Load
(above)
Calculated Cross
Sectional Area
(mm2
)
Outside Dia.
(mm)
Weight Electric
Resistance
Standard
Length
Reference
(mm2
) (kgf)HT-Al Alloy HT-Al Alloy AW HT-Al Alloy AW (kg/km) (m)( /km, 20 )AW
480
(Cardinal)
54/3.38 7/3.38 18,880 484.53 62.81 30.42 10.14 1,756 0.0633 2,000
(Table 17)
17TAIHAN Overhead Electrical Aluminum Conductors

18. Hard-drawn Aluminum Conductor Weather-resistant
Insulation WiresHAL-OC
Application
This standard covers HAL-OC(for use in 6,600~22,900 volts circuits) to
be used weather-resistant insulation wire for the distribution of
electrical energy under the normal conditions of overhead line service.
Construction
Solid or stranded hard-drawn aluminum conductor and cross-linked
polyethylene insulation
Standards
Conforms to KS C 3139, ES 121-250, 121-255
Nominal
Cross
Sectional
Area
lnsulation
Thickness
Conductor Outside
Dia.No. and
Dia.
of Strands
Outside
Dia.
Max.
Electric
Resistance
Min.
lnsulation
Resistance
Test
Voltage
Tensile
Load
Weight Standard
Length
(mm2
) (mm) (mm) (mm) ( /km, 20 ) ( km, 20 ) (V/1mins) (kgf) (kg/km) (m)(No./mm)
150 19/3.2 16.0 2.5 21.0 0.193 1,000 12,000 2,270 600 300
(Table 18)Within 6.6kV
Nominal
Cross
Sectional
Area
lnsulation
Thickness
Conductor Outside
Dia.No. and
Dia.
of Strands
Outside
Dia.
Max.
Electric
Resistance
Min.
lnsulation
Resistance
Test
Voltage
Tensile
Load
Weight Standard
Length
(mm2
) (mm) (mm) (mm) ( /km, 20 ) ( km, 20 ) (V/1mins) (kgf) (kg/km) (m)(No./mm)
150 19/3.2 16.0 4.0 24.0 0.193 1,500 25,000 2,270 650 600
(Table 19)Within 22.9kV
Aluminum conductor
XLPE insulation
18 Overhead Electrical Aluminum Conductors TAIHAN

19. ASTMANSIIECBSASCSADINKSJISKEPCOTEC
ACSR-OC Aluminum, Steel-reinforced(ACSR) Conductor
Weather-resistant Insulation Wire
Application
This standard covers ACSR-OC(for use in 6,600~22,900 volts circuits)
to be used weather-resistant insulation wire for the distribution of
electrical energy under the normal conditions of overhead line service.
Nominal
Cross
Sectional
Area
lnsulation
Thickness
Outside
Dia.
Max.
Electric
Resistance
Min.
lnsulation
Resistance
Test
Voltage
Tensile
Load
Weight Standard
Length
Conductor
No. and Dia.
of Strands
(No./mm)
Outside
Dia.
(mm2
) (mm) (mm) (mm) (V/1mins) (kgf) (kg/km) (m)( /km, 20 ) ( km, 20 )Al St
32
58
95
6/SB
6/SB
6/SB
1/2.6
1/3.5
1/3.5
7.2
9.7
12.0
2.0
2.5
2.5
11.2
14.7
17.0
0.928
0.512
0.313
1,500
1,500
1,000
12,000
12,000
12,000
1,090
1,900
2,360
185
325
455
900
600
300
(Table 20)
Construction
Aluminum, steel-reinforced conductor and cross-linked polyethylene
insulation
Standards
Conforms to KS C 3138, ES 121-200-202, 121-230-275
Within 6.6kV
Nominal
Cross
Sectional
Area
lnsulation
Thickness
Outside
Dia.
Max.
Electric
Resistance
Min.
lnsulation
Resistance
Test
Voltage
Tensile
Load
Weight Standard
Length
Conductor
No. and Dia.
of Strands
(No./mm)
Outside
Dia.
(mm2
) (mm) (mm) (mm) (V/1mins) (kgf) (kg/km) (m)( /km, 20 ) ( km, 20 )Al St
32
58
95
160
6/SB
6/SB
6/SB
18/SB
1/2.6
1/3.5
1/3.5
1/3.2
7.2
9.7
12.0
15.4
3.0
3.0
3.5
4.0
13.2
15.7
19.0
23.4
0.928
0.512
0.313
0.186
2,000
1,500
1,500
1,500
25,000
25,000
25,000
25,000
1,090
1,900
2,360
3,080
215
340
540
740
900
600
600
600
(Table 21)Within 22.9kV
Galvanized steel
XLPE insulation
Aluminum conductor
SB : Smooth body
SB : Smooth body
19TAIHAN Overhead Electrical Aluminum Conductors

20. Aluminum, Al-clad, Steel-reinforced(ACSR/AW)
Conductor Weather-resistant Insulation WiresACSR/AW-OC
Application
This standard covers ACSR/AW-OC(for use in 6,600~22,900 volts
circuits) to be used weather-resistant insulation wire for the distribution
of electrical energy under the normal conditions of overhead line service.
Construction
Aluminum, Al-clad steel-reinforced conductor and cross-linked
polyethylene insulation
Standards
Conforms to KEPCO specification
XLPE insulation Aluminum
Al-clad
Nominal
Cross
Sectional
Area
lnsulation
Thickness
Outside
Dia.
Electric
Resistance
Min.
lnsulation
Resistance
Test
Voltage
Tensile
Load
Weight Standard
Length
Conductor
No. and Dia.
of Strands
(No./mm)
Outside
Dia.
(mm2
) (mm) (mm) (mm) (V/1mins) (kgf) (kg/km) (m)( /km, 20 ) ( km, 20 )Al AW
32
58
95
6/SB
6/SB
6/SB
1/2.6
1/3.5
1/3.5
7.2
9.7
12.0
2.0
2.5
2.5
11.2
14.7
17.0
0.877
0.484
0.302
1,500
1,500
1,000
12,000
12,000
12,000
1,090
1,900
2,360
180
315
445
900
600
300
(Table 22)Within 6.6kV
SB : Smooth body
Nominal
Cross
Sectional
Area
lnsulation
Thickness
Outside
Dia.
Electric
Resistance
Min.
lnsulation
Resistance
Test
Voltage
Tensile
Load
Weight Standard
Length
Conductor
No. and Dia.
of Strands
(No./mm)
Outside
Dia.
(mm2
) (mm) (mm) (mm) (V/1mins) (kgf) (kg/km) (m)( /km, 20 ) ( km, 20 )Al AW
32
58
95
160
240
6/SB
6/SB
6/SB
18/SB
18/SB
1/2.6
1/3.5
1/3.5
1/3.2
1/4.0
7.2
9.7
12.0
15.4
18.9
3.0
3.0
3.5
4.0
4.0
13.2
15.7
19.0
23.4
27.0
0.877
0.484
0.302
0.183
0.123
2,000
1,500
1,500
1,500
1,500
25,000
25,000
25,000
25,000
25,000
1,090
1,900
2,360
3,080
4,500
210
330
530
730
1,040
900
600
600
600
600
(Table 23)Within 22.9kV
SB : Smooth body
20 Overhead Electrical Aluminum Conductors TAIHAN

21. American Society for Testing and Materials
American National Standards Institute
ASTM
ANSI
21TAIHAN Overhead Electrical Aluminum Conductors

22. Hard-drawn Aluminum Wires for Electric Purposes
HAL
Application
This standard covers hard-drawn circular aluminum wires for electric
purposes to be used mainly as component wires of hard-drawn
aluminum stranded cables and aluminum cables steel reinforced.
Construction
Single aluminum conductor
Standards
Conforms to ASTM B 230-97
(Table 24)Tensile Requirements
Diameter
ksi Mpa ksi Mpa
Average
for a Lot
Individual
Tests
Average
for a Lot
Individual
Tests
( %, or in)
Tolerance
on Dia.
Average for a Lot lndividual Tests
Min. Tensile Strength Min. Elongation in
10 in or 250mm
(%)
Min. Volume
Conductivity
(% IACS, 20 (68 ))
in mm
0.2600 to 0.2101
0.2100 to 0.1801
0.1800 to 0.1501
0.1500 to 0.1401
0.1400 to 0.1201
0.1200 to 0.1101
0.1101 to 0.1001
0.1000 to 0.0901
0.0900 to 0.0801
0.0800 to 0.0701
0.0700 to 0.0601
0.0600 to 0.0501
0.0500 to 0.0105
6.604 to 5.337
5.334 to 4.575
4.572 to 3.813
3.810 to 3.559
3.556 to 3.051
3.048 to 2.797
2.794 to 2.543
2.540 to 2.289
2.286 to 2.035
2.032 to 1.781
1.778 to 1.527
1.524 to 1.273
1.270 to 0.267
1%
1%
1%
1%
1%
1%
1%
0.0010 in
0.0010 in
0.0010 in
0.0010 in
0.0010 in
0.0010 in
23.5
24.0
24.0
24.5
25.0
25.5
26.0
27.0
27.5
28.0
28.5
29.0
25.0
162
165
165
169
172
176
179
186
190
193
197
200
172
22.5
23.0
23.0
23.5
23.5
24.0
24.5
25.5
26.0
26.5
27.0
27.0
23.0
155
159
159
162
162
165
169
176
179
183
186
186
159
2.3
2.1
2.0
1.9
1.8
1.7
1.6
1.6
1.6
1.6
1.5
1.4
-
2.2
2.0
1.9
1.8
1.7
1.6
1.5
1.5
1.5
1.4
1.3
1.2
-
61.2
61.2
61.2
61.2
61.2
61.2
61.2
61.2
61.2
61.2
61.2
61.2
61.2
61.0
61.0
61.0
61.0
61.0
61.0
61.0
61.0
61.0
61.0
61.0
61.0
61.0
(Table 25)Equivalent Resistivity Values at 20 C(68 F)
Material
Volume
Conductivity
(% IACS)
Resistivity Constants
WeightVolume
cmil/ft mm2
/m in cm -lb/mile2
-g/m2
Copper
Aluminum
Aluminum
100
61.0
61.2
10.371
17.002
16.946
0.017241
0.028265
0.028172
0.67879
1.1128
1.1091
1.7241
2.8265
2.8172
875.20
436.23
434.81
0.15328
0.076399
0.076149
22 Overhead Electrical Aluminum Conductors TAIHAN

23. ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Zinc-coated(galvanized) Steel Core Wire (ASTM B 498-93)
(Table 26)
(Table 27)
Tensile Requirements and Permissible Variations in Diameter
Mpa ksi Mpa (%) Plus
in mm
Minus Plus Minusksi
Nominal Dia. Min. Stress
at 1% Extension
Min. Ultimate
Tensile Strength
Min.
Elogation
in 10 in
or 250mm
Permissible Variation
Class A Coating
in mm
0.0500 to 0.0899
0.0900 to 0.1199
0.1200 to 0.1399
0.1400 to 0.1900
1.270 to 2.283
2.286 to 3.045
3.048 to 3.553
3.556 to 4.822
190
185
180
170
1,310
1,280
1,240
1,170
210
205
205
200
1,450
1,410
1,410
1,380
3.0
3.5
4.0
4.0
0.0015
0.002
0.003
0.004
0.001
0.002
0.002
0.003
0.038
0.051
0.076
0.102
0.025
0.051
0.051
0.076
Class B Coating
0.0500 to 0.0899
0.0900 to 0.1199
0.1200 to 0.1399
0.1400 to 0.1900
1.270 to 2.283
2.286 to 3.045
3.048 to 3.553
3.556 to 4.822
180
175
170
160
1,240
1,210
1,170
1,100
200
195
195
185
1,380
1,340
1,340
1,280
3.0
3.0
3.0
4.0
0.0015
0.002
0.003
0.004
0.001
0.002
0.002
0.003
0.038
0.051
0.076
0.102
0.025
0.051
0.051
0.076
Class C Coating
0.0500 to 0.0899
0.0900 to 0.1199
0.1200 to 0.1399
0.1400 to 0.1900
1.270 to 2.283
2.286 to 3.045
3.048 to 3.553
3.556 to 4.822
170
165
160
155
1,170
1,140
1,100
1,070
190
185
185
180
1,310
1,280
1,280
1,240
3.0
3.0
3.0
4.0
0.0015
0.002
0.003
0.004
0.001
0.002
0.002
0.003
0.038
0.051
0.076
0.102
0.025
0.051
0.051
0.076
Minimum Weight of Coating and Mandrel Size for Adherence Test
Nominal Dia. of Coated Wire
Min. Weight of Zinc-coating
oz/ft2
of Uncoated Wire Surface
Coating
in mm
Coating
Class A Class B Class C Class A Class B Class C
Ratio of
Mandrel
Dia. to
Wire Dia.
Min. Weight of Zinc-coating
g/m2
of Uncoated Wire Surface
0.0500 to 0.0599
0.0600 to 0.0749
0.0750 to 0.0899
0.0900 to 0.1039
0.1040 to 0.1199
0.1200 to 0.1399
0.1400 to 0.1799
0.1800 to 0.1900
1.270 to 1.521
1.524 to 1.902
1.905 to 2.283
2.286 to 2.639
2.642 to 3.045
3.048 to 3.553
3.556 to 4.569
4.572 to 4.822
0.60
0.65
0.70
0.75
0.80
0.85
0.90
1.00
1.20
1.30
1.40
1.50
1.60
1.70
1.80
2.00
1.80
1.95
2.10
2.25
2.40
2.55
2.70
3.00
183
198
214
229
244
259
274
305
366
396
437
458
488
518
549
610
549
550
610
686
732
778
824
915
3
3
3
4
4
4
5
5
23TAIHAN Overhead Electrical Aluminum Conductors

24. Stranded Hard-drawn Aluminum ConductorAAC
Notes : Class AA - For bare conductors usually used in overhead lines.
Class A - For conductors to be covered with weather-resistant materials.
Application
This standard covers stranded hard-drawn aluminum conductors to be
used mainly for overhead distribution wire, overhead feeders and
buses.
Construction
Stranded hard-drawn aluminum conductor
Standards
Conforms to ASTM B 231-95
Code
Word
Conductor
Dia.
(in)
Weight
(lb/1000ft)
Rated
Strength
(lb)
Calculated
Resistance
at 20
(68 )
( /1000ft)
Ampacity
(amps)
AWG
or
CMILS
sq in Class No. and
Dia. of
Strands
(in)
Conductor Size Stranding
Peachbell
Rose
Lily
Iris
Pansy
Poppy
Aster
Phlox
Oxlip
Sneezewort
Valerian
Daisy
Laurel
Peony
Tulip
Daffodil
Canna
Goldentuft
Cosmos
Syringa
Zinnia
Hyacinth
Dahlia
Mistletoe
Meadowsweet
Orchid
Heuchera
Verbena
Flag
Violet
6
4
3
2
1
1/0
2/0
3/0
4/0
250,000
250,000
266,800
266,800
300,000
336,400
350,000
397,500
450,000
477,000
477,000
500,000
500,000
556,500
556,500
600,000
636,000
650,000
700,000
700,000
715,500
0.0206
0.0328
0.0413
0.0521
0.0657
0.0829
0.1045
0.1318
0.1662
0.1964
0.1964
0.2095
0.2095
0.2356
0.2642
0.2749
0.3122
0.3534
0.3746
0.3746
0.3927
0.3927
0.4371
0.4371
0.4717
0.4995
0.5105
0.5498
0.5498
0.5620
A
A
A
A&AA
A&AA
A&AA
A&AA
A&AA
A&AA
AA
A
AA
A
A
A
A
A&AA
AA
AA
A
AA
A
A
A&AA
A&AA
AA
AA
AA
A
AA
7 0.0612
7 0.0772
7 0.0867
7 0.0974
7 0.1093
7 0.1228
7 0.1379
7 0.1548
7 0.1739
7 0.1890
19 0.1147
7 0.1953
19 0.1185
19 0.1257
19 0.1331
19 0.1357
19 0.1447
19 0.1539
19 0.1584
37 0.1135
19 0.1622
37 0.1162
19 0.1711
37 0.1226
37 0.1273
37 0.1311
37 0.1326
37 0.1375
61 0.1071
37 0.1391
0.184
0.232
0.260
0.292
0.328
0.368
0.414
0.464
0.522
0.567
0.574
0586
0.593
0.629
0.666
0.679
0.724
0.770
0.792
0.795
0.811
0.813
0.856
0.858
0.891
0.918
0.928
0.963
0.964
0.974
24.6
39.1
49.4
62.2
78.4
98.9
124.8
157.2
198.4
234.4
234.7
250.2
250.1
281.4
315.5
327.9
372.9
421.8
446.8
446.8
468.5
468.3
521.4
521.3
562.0
596.0
609.8
655.7
655.8
671.0
563
881
1,023
1,350
1,640
1,990
2,510
3,040
3,830
4,520
4,510
4,830
4,970
5,480
6,150
6,390
7,110
7,890
8,360
8,690
8,760
9,110
9,750
9,940
10,700
11,400
11,600
12,500
12,900
12,800
0.6609
0.4155
0.3296
0.2613
0.2072
0.1642
0.1303
0.1033
0.08196
0.0694
0.0694
0.06500
0.06500
0.0578
0.0515
0.0496
0.04363
0.0386
0.03636
0.03636
0.347
0.347
0.03116
0.03116
0.0289
0.02727
0.0267
0.0248
0.0248
0.02424
103
138
159
185
214
247
286
330
382
414
416
442
444
458
513
521
570
612
639
640
669
670
703
704
721
765
782
804
805
823
(Table 28)
24 Overhead Electrical Aluminum Conductors TAIHAN

25. ASTMANSIIECBSASCSADINKSJISKEPCOTEC
(Table 28)
Notes : Class AA - For bare conductors usually used in overhead lines.
Class A - For conductors to be covered with weather-resistant materials.
Code
Word
Conductor
Dia.
(in)
Weight
(lb/1000ft)
Rated
Strength
(lb)
Calculated
Resistance
at 20
(68 )
( /1000ft)
Ampacity
(amps)
AWG
or
CMILS
sq in Class No. and
Dia. of
Wires
(in)
Conductor Size Stranding
Nasturtium
Petunia
Cattail
Arbutus
Lilac
Anemone
Crocus
Cockscomb
Snapdragon
Magnolia
Goldenrod
Hawkweed
Camellia
Bluebell
Larkspur
Marigold
Hawthorn
Narcissus
Columbine
Carnation
Gladiolus
Coreopsis
Dogwood
Jessamine
Cowslip
Sagebrush
Lupine
Bitterroot
Trillium
Bluebonnet
715,500
750,000
750,000
795,000
795,000
874,500
874,500
900,000
900,000
954,000
954,000
1,000,000
1,000,000
1,033,500
1,033,500
1,113,000
1,192,500
1,272,000
1,351,000
1,431,000
1,510,500
1,590,000
1,590,000
1,750,000
2,000,000
2,250,000
2,500,000
2,750,000
3,000,000
3,500,000
0.5620
0.5890
0.5890
0.6244
0.6244
0.6868
0.6868
0.7069
0.7069
0.7493
0.7493
0.7854
0.7854
0.8117
0.8117
0.8741
0.9366
0.9990
1.062
1.124
1.186
1.249
1.249
1.374
1.570
1.766
1.962
2.158
2.350
2.749
A
AA
A
AA
A
AA
A
AA
A
AA
A
AA
A
AA
A
A&AA
A&AA
A&AA
A&AA
A&AA
A&AA
AA
A
AA
A
A
A
A
A
A
61 0.1083
37 0.1424
61 0.1109
37 0.1466
61 0.1142
37 0.1538
61 0.1198
37 0.1560
61 0.1215
37 0.1606
61 0.1251
37 0.1644
61 0.1280
37 0.1671
61 0.1302
61 0.1351
61 0.1398
61 0.1444
61 0.1488
61 0.1532
61 0.1574
61 0.1614
91 0.1322
61 0.1694
91 0.1482
91 0.1572
91 0.1657
91 0.1738
127 0.1537
127 0.1660
0.975
0.997
0.998
1.026
1.028
1.077
1.078
1.092
1.094
1.124
1.126
1.151
1.152
1.170
1.172
1.216
1.258
1.300
1.339
1.379
1.417
1.453
1.454
1.525
1.630
1.729
1.823
1.912
1.996
2.158
671.0
703.2
703.2
745.3
745.7
821.0
821.0
844.0
844.0
894.5
894.8
937.3
936.8
968.4
969.2
1,044
1,117
1,192
1,266
1,342
1,417
1,489
1,493
1,641
1,873
2,128
2,365
2,602
2,840
3,345
13,100
13,100
13,500
13,900
14,300
14,830
15,760
16,400
15,900
16,400
16,900
17,200
17,700
17,700
18,300
19,700
21,100
22,000
23,400
24,300
25,600
27,000
28,100
29,700
34,200
37,700
41,900
46,100
50,300
58,700
0.02424
0.0231
0.0231
0.02181
0.02181
0.01983
0.01983
0.0193
0.0193
0.01818
0.01818
0.0174
0.0173
0.01678
0.01678
0.01558
0.01454
0.01363
0.01283
0.01212
0.01148
0.01091
0.01091
0.00991
0.00868
0.00779
0.00701
0.00637
0.00584
0.00505
824
842
848
874
878
932
932
938
943
982
982
1,003
1,005
1,031
1,032
1,079
1,125
1,170
1,212
1,254
1,295
1,334
1,334
1,499
1,595
1,686
1,772
1,953
2,283
2,689
25TAIHAN Overhead Electrical Aluminum Conductors

26. Aluminum Conductors, Steel ReinforcedACSR
Application
This standard covers aluminum stranded conductors steel reinforced
which could withstand high tensile load to be used mainly for overhead
transmission lines, overhead distribution lines.
Construction
The center wire or wires are of galvanized steel and the outer layer or
layers of aluminum.
Standards
Conforms to ASTM B 232-97
Code
Word
Outside Dia.
(in)
Weight
(lb/1000ft)
Ultimate
Strength
(lb)
Resistance
at 20
( /1000ft)
Ampacity
(Amps)
AWG
or
CMILS
Cross Sectional
Area (sq in)
Al Total Al St Total Al St
Complete
Cable
Steel
Core
Stranding
Conductor Size
Turkey
Thrush
Swan
Swanate
Swallow
Sparrow
Sparate
Robin
Raven
Quail
Pigeon
Penguin
Waxwing
Partridge
Ostrich
Merlin
Linnet
Oriole
Chickadee
Brant
Ibis
Lark
Pelican
Flicker
Hawk
Hen
Osprey
Parakeet
Dove
Eagle
Peacock
Squab
Wood Duck
Teal
Rook
6
5
4
4
3
2
2
1
1/0
2/0
3/0
4/0
266,800
266,800
300,000
336,400
336,400
336,400
397,500
397,500
397,500
397,500
477,000
477,000
477,000
477,000
556,500
556,500
556,500
556,500
605,000
605,000
605,000
605,000
636,000
0.0206
0.0260
0.0328
0.0328
0.0413
0.0521
0.0521
0.0657
0.0829
0.1045
0.1318
0.1662
0.2095
0.2095
0.2356
0.2642
0.2642
0.2642
0.3122
0.3122
0.3122
0.3122
0.3746
0.3746
0.3746
0.3746
0.4371
0.4371
0.4371
0.4371
0.4752
0.4752
0.4752
0.4752
0.4955
0.0240
0.0303
0.0383
0.0411
0.0482
0.0608
0.0653
0.0767
0.0967
0.1219
0.1538
0.1939
0.2211
0.2436
0.2740
0.2789
0.3072
0.3259
0.3295
0.3525
0.3630
0.3850
0.3954
0.4232
0.4356
0.4620
0.4614
0.4938
0.5083
0.5391
0.5368
0.5526
0.5861
0.5835
0.5643
6 0.0661
6 0.0743
6 0.0834
7 0.0772
6 0.0937
6 0.1052
7 0.0974
6 0.1181
6 0.1327
6 0.1489
6 0.1672
6 0.1878
18 0.1217
26 0.1013
26 0.1074
18 0.1367
26 0.1137
30 0.1059
18 0.1486
24 0.1287
26 0.1236
30 0.1151
18 0.1628
24 0.1410
26 0.1354
30 0.1261
18 0.1758
24 0.1523
26 0.1463
30 0.1362
24 0.1588
26 0.1525
30 0.1420
30 0.1420
24 0.1628
1 0.0661
1 0.0743
1 0.0834
1 0.1029
1 0.0937
1 0.1052
1 0.1299
1 0.1181
1 0.1327
1 0.1489
1 0.1672
1 0.1878
1 0.1217
7 0.0788
7 0.0835
1 0.1367
7 0.0884
7 0.1059
1 0.1486
7 0.0858
7 0.0961
7 0.1151
1 0.1628
7 0.0940
7 0.1053
7 0.1261
1 0.1758
7 0.1015
7 0.1138
7 0.1362
7 0.1059
7 0.1186
7 0.1420
19 0.0852
7 0.1085
0.198
0.223
0.250
0.257
0.281
0.316
0.325
0.354
0.398
0.447
0.502
0.563
0.609
0.642
0.680
0.684
0.720
0.741
0.743
0.772
0.783
0.806
0.814
0.846
0.858
0.883
0.879
0.914
0.927
0.953
0.953
0.966
0.994
0.994
0.997
0.0661
0.0743
0.0834
0.1029
0.0937
0.1052
0.1299
0.1181
0.1327
0.1489
0.1672
0.1878
0.1217
0.2364
0.2505
0.1367
0.2652
0.3177
0.1486
0.2574
0.2883
0.3453
0.1628
0.2820
0.3159
0.3783
0.1758
0.3045
0.3414
0.4086
0.3177
0.3558
0.4260
0.2556
0.3255
36.1
45.5
57.4
67.0
72.4
91.3
106.7
115.2
145.2
183.1
230.8
291.1
290
367
413
365
463
527
432
512
547
623
518
615
657
747
604
717
766
872
780
833
948
940
819
24.5
30.9
39.0
39.0
49.2
62.0
62.0
78.2
98.6
124.3
156.8
197.7
250.5
251.7
283.0
315.8
317.3
318.1
373.2
375
375.0
375.9
447.8
450.0
450.0
451.1
522.4
525.0
525.0
526.3
570.7
570.7
572
572.1
600.0
11.6
14.6
18.4
28.0
23.3
29.3
44.7
37.0
46.6
58.8
74.0
93.4
39.2
115.6
129.8
49.5
145.8
209
58.5
137
171.9
246.9
70.2
164.5
206.8
296.3
81.9
191.8
241.1
345.7
208.8
261.9
376
367.6
219.2
1,190
1,490
1,860
2,360
2,250
2,850
3,640
3,550
4,380
5,300
6,620
8,350
6,900
11,300
12,700
8,620
14,100
17,300
9,900
14,600
16,300
20,300
11,800
17,200
19,500
23,800
13,700
19,800
22,600
27,800
21,600
24,300
28,900
30,000
22,600
0.6577
-
0.4134
0.4134
-
0.2601
0.2601
0.2062
0.1634
0.1297
0.1028
0.8155
0.06500
0.06532
0.05809
0.05155
0.05181
0.05193
0.04363
0.04384
0.04384
0.04395
0.03636
0.03654
0.03654
0.03662
0.03116
0.03132
0.03132
0.03139
0.02880
0.02820
0.0289
0.0289
0.02740
104
-
139
139
-
183
184
210
240
275
316
360
448
457
492
518
528
534
575
578
586
593
644
654
658
665
708
718
725
732
757
762
769
772
782
(Table 29)
Galvanized steel
Aluminum conductor
26 Overhead Electrical Aluminum Conductors TAIHAN

27. ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Code
Word
Outside Dia.
(in)
Weight
(lb/1000ft)
Ultimate
Strength
(lb)
Resistance
at 20
( /1000ft)
Ampacity
(Amps)
AWG
or
CMILS
Cross Sectional
Area (sq in)
Al Total Al St Total Al St
Complete
Cable
Steel
Core
Stranding
Conductor Size
Grosbeak
Swift
Scoter
Kingbird
Egret
Flamingo
Gannet
Crow
Starling
Redwing
Stilt
Drake
Mallard
Tern
Condor
Coot
Cuckoo
Crane
Canary
Ruddy
Rail
Cardinal
Catbird
Ortolan
Curlew
Tanager
Bluejay
Finch
Bunting
Grackle
Bittern
Pheasant
Dipper
Martin
Bobolink
Plover
Nuthatch
Parrot
Lapwing
Falcon
Chukar
Bluebird
Kiwi
Thrasher
636,000
636,000
636,000
636,000
636,000
666,600
666,600
715,500
715,500
715,500
715,500
795,000
795,000
795,000
795,000
795,000
795,000
874,500
900,000
900,000
954,000
954,000
954,000
1,033,500
1,033,500
1,033,500
1,113,000
1,113,000
1,192,500
1,192,500
1,272,000
1,272,000
1,351,500
1,351,500
1,431,000
1,431,000
1,510,500
1,510,500
1,590,000
1,590,000
1,780,000
2,156,000
2,167,000
2,312,000
0.4995
0.4975
0.4995
0.4995
0.4995
0.5235
0.5235
0.5620
0.5620
0.5620
0.5628
0.6244
0.6244
0.6244
0.6244
0.6244
0.6244
0.6868
0.7069
0.7069
0.7493
0.7493
0.7493
0.8117
0.8117
0.8117
0.8741
0.8741
0.9367
0.9366
0.9990
0.9990
1.062
1.0625
1.124
1.124
1.186
1.186
1.249
1.249
1.398
1.693
1.702
1.816
0.5809
0.5134
0.6161
0.5292
0.6134
0.5914
0.6087
0.6348
0.6535
0.6901
0.6356
0.7261
0.7668
0.6676
0.7053
0.6417
0.7053
0.7759
0.7985
0.7555
0.8011
0.8464
0.7701
0.8678
0.9169
0.8342
0.9346
0.9849
1.001
1.055
1.068
1.126
1.135
1.196
1.202
1.266
1.268
1.337
1.335
1.407
1.512
1.828
1.776
1.915
26 0.1564
36 0.1329
30 0.1456
18 0.1880
30 0.1456
24 0.1667
26 0.1601
54 0.1151
26 0.1659
30 0.1544
24 0.1727
26 0.1749
30 0.1628
45 0.1329
54 0.1213
36 0.1486
24 0.1820
54 0.1273
54 0.1291
45 0.1414
45 0.1456
54 0.1329
36 0.1628
45 0.1515
54 0.1383
36 0.1694
45 0.1573
54 0.1436
45 0.1628
54 0.1486
45 0.1681
54 0.1535
45 0.1733
54 0.1582
45 0.1783
54 0.1628
45 0.1832
54 0.1672
45 0.1880
54 0.1716
84 0.1456
84 0.1602
72 0.1735
76 0.1744
7 0.1216
1 0.1329
7 0.1456
1 0.1880
19 0.0874
7 0.1111
7 0.1245
7 0.1151
7 0.1290
19 0.0926
7 0.1151
7 0.1360
19 0.0977
7 0.0886
7 0.1213
1 0.1486
7 0.1213
7 0.1273
7 0.1291
7 0.0943
7 0.0971
7 0.1329
1 0.1628
7 0.1010
7 0.1383
1 0.1694
7 0.1049
19 0.0862
7 0.1085
19 0.0892
7 0.1121
19 0.0921
7 0.1151
19 0.0949
7 0.1189
19 0.0977
7 0.1221
19 0.1003
7 0.1253
19 0.1030
19 0.0874
19 0.0961
7 0.1157
19 0.0814
0.990
0.930
1.019
0.940
1.019
1.000
1.014
1.036
1.051
1.081
1.036
1.108
1.140
1.063
1.092
1.040
1.092
1.146
1.162
1.131
1.165
1.196
1.140
1.212
1.245
1.186
1.259
1.293
1.302
1.338
1.345
1.382
1.386
1.424
1.427
1.465
1.466
1.505
1.504
1.545
1.602
1.762
1.735
1.802
0.3648
0.1329
0.4368
0.1880
0.4370
0.3333
0.3735
0.3453
0.3870
0.4630
0.3453
0.4080
0.4885
0.2658
0.3639
0.1486
0.3639
0.3819
0.3873
0.2829
0.2913
0.3987
0.1628
0.3030
0.4149
0.1694
0.3147
0.4310
0.3255
0.4460
0.3363
0.4605
0.3453
0.4745
0.3567
0.4885
0.3663
0.5015
0.3759
0.5150
0.4370
0.4805
0.3471
0.4070
875
644
993
690
988
859
918
921
985
1,111
922
1,094
1,235
896
1,024
805
1,024
1,126
1,159
1,015
1,075
1,229
966
1,165
1,331
1,046
1,255
1,431
1,344
1,533
1,434
1,635
1,523
1,737
1,613
1,840
1,702
1,942
1,792
2,044
2,074
2,512
2,304
2,527
600.0
597
601
597
601.4
628.8
629
675.0
675.0
676.6
675
750.0
751.8
750.0
750.0
746
750
825.0
849.0
849
900.0
900.0
896
975.0
975.0
970
1,050
1,055
1,125
1,130
1,200
1,205.8
1,275
1,281.2
1,350
1,356.5
1,425
1,432
1,500
1,507
1,687
2,044
2,055
2,191
275.3
47
392
93
386.8
229.8
289
246.4
309.8
434.2
247
344.3
483.3
146.0
274.1
59
274
301.4
310.0
166
175.0
328.5
70
190.0
356.3
76
205
376
219
403
234
429.5
248
456
263
483.3
277
510
292
537
387
468
249
336
25,200
13,800
30,400
15,700
31,500
23,700
26,400
26,300
28,400
34,600
25,500
31,500
38,400
22,100
28,200
16,800
27,900
31,400
31,900
24,400
25,900
33,800
19,800
27,700
36,600
21,400
29,800
39,100
32,000
41,900
34,100
43,600
36,200
46,300
38,300
49,100
40,100
51,700
42,200
54,500
51,000
60,300
49,800
56,700
0.02740
0.0274
0.0275
0.0273
0.02747
0.02614
0.0261
0.02436
0.02436
0.02442
0.02436
0.02192
0.02197
0.02192
0.02192
0.0218
0.0219
0.01993
0.01936
0.0194
0.01827
0.01827
0.0181
0.01686
0.01686
0.0167
0.01566
0.01573
0.01461
0.01469
0.01370
0.01377
0.01290
0.01296
0.01218
0.01224
0.01154
0.01159
0.01096
0.01101
0.00984
0.0080
0.0080
0.00749
787
784
792
778
797
805
809
825
847
858
845
903
913
875
881
905
894
935
926
918
953
960
972
1,005
1,010
1,007
1,051
1,060
1,099
1,108
1,145
1,148
1,188
1,198
1,227
1,237
1,268
1,278
1,310
1,313
1,434
1,620
1,634
1,875
(Table 29)
27TAIHAN Overhead Electrical Aluminum Conductors

28. Aluminum Conductors, Aluminum-clad Steel ReinforcedACSR/AW
Note : Class AA - For bare conductors usually used in overhead lines.
Application
This standard covers aluminum stranded conductors aluminum-clad
steel reinforced which could withstand high tensile load to be used
mainly for overhead transmission lines, overhead distribution lines.
Construction
The center wire or wires are of aluminum-clad steel and the outer layer
or layers of aluminum.
Standards
Conforms to ASTM B 549-93
Conductor Size (Al Wire)
CMILS AWG mm2
Class
No. of
Wires
No. of
Wiresin mm in mm
Nominal Dia. Nominal Dia.
Aluminum Aluminum-clad Steel
kips
(1000 lbf)
kN lb/10000ft kg/km
Stranding Rated Strength Linear Density
2,312,000
2,167,000
2,156,000
1,780,000
1,590,000
1,590,000
1,510,000
1,510,000
1,431,000
1,431,000
1,351,000
1,351,000
1,272,000
1,272,000
1,272,000
1,192,500
1,192,500
1,113,000
1,113,000
1,033,500
1,033,500
1,033,500
954,000
954,000
954,000
900,000
900,000
795,000
795,000
795,000
795,000
795,000
795,000
715,000
715,000
715,000
666,600
1,171
1,098
1,092
901.9
805.7
805.7
765.1
765.1
725.1
725.1
684.6
684.6
644.5
644.5
644.5
604.2
604.2
564.0
564.0
523.7
523.7
523.7
483.4
483.4
483.4
456.0
456.0
402.8
402.8
402.8
402.8
402.8
402.8
362.3
362.3
362.3
337.8
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
76
72
84
84
54
45
54
45
54
45
54
45
54
45
36
54
45
54
45
54
45
36
54
45
36
54
45
30
54
45
26
24
36
30
26
24
26
0.1744
0.1735
0.1602
0.1456
0.1716
0.1880
0.1672
0.1832
0.1628
0.1783
0.1582
0.1733
0.1535
0.1681
0.1880
0.1486
0.1628
0.1436
0.1573
0.1383
0.1515
0.1694
0.1329
0.1456
0.1628
0.1291
0.1414
0.1628
0.1213
0.1329
0.1749
0.1820
0.1486
0.1544
0.1659
0.1727
0.1601
4.430
4.407
4.069
3.698
4.359
4.775
4.247
4.653
4.135
4.529
4.018
4.402
3.899
4.270
4.775
3.774
4.135
3.647
3.995
3.513
3.848
4.303
3.376
3.698
4.135
3.279
3.592
4.135
3.081
3.376
4.442
4.623
3.774
3.922
4.214
4.387
4.067
19
7
19
19
19
7
19
7
19
7
19
7
19
7
1
19
7
19
7
7
7
1
7
7
1
7
7
19
7
7
7
7
1
19
7
7
7
0.0814
0.1157
0.0961
0.0874
0.1030
0.1253
0.1003
0.1221
0.0977
0.1189
0.0949
0.1155
0.0921
0.1121
0.1880
0.0892
0.1085
0.0862
0.1049
0.1383
0.1010
0.1694
0.1329
0.0971
0.1628
0.1291
0.0943
0.0977
0.1213
0.0886
0.1360
0.1213
0.1486
0.0926
0.1290
0.1151
0.1245
2.068
2.939
2.441
2.220
2.616
3.183
2.548
3.101
2.482
3.020
2.410
2.934
2.339
2.847
4.775
2.266
2.756
2.189
2.664
3.513
2.565
4.303
3.376
2.466
4.135
3.279
2.395
2.482
3.081
2.250
3.454
3.081
3.774
2.352
3.277
2.924
3.162
55.3
49.1
59.0
49.4
53.0
41.8
50.3
39.7
47.7
37.6
45.1
35.5
42.4
33.4
25.7
40.2
31.3
37.5
29.3
35.6
27.1
21.1
32.9
25.4
19.5
31.0
24.0
37.1
27.8
21.5
30.5
27.5
16.6
33.4
27.5
24.8
26.0
246
219
262
220
236
186
224
176
212
167
200
158
189
149
114
179
139
167
130
158
121
93.7
146
113
86.6
138
107
165
124
95.4
136
122
73.8
148
122
110
116
2,472
2,262
2,437
2,013
1,960
1,746
1,860
1,658
1,764
1,570
1,665
1,483
1,568
1,396
1,272
1,470
1,309
1,373
1,222
1,274
1,134
1,033
1,177
1,047
954
1,111
938
1,160
980
872
1,041
981
795
1,043
936
883
872
3,678
3,367
3,528
2,995
2,917
2,598
2,768
2,467
2,625
2,337
2,478
2,207
2,333
2,077
1,893
2,187
1,948
2,043
1,819
1,896
1,687
1,537
1,751
1,558
1,419
1,653
1,470
1,726
1,459
1,298
1,549
1,459
1,182
1,552
1,393
1,314
1,298
(Table 30)
Aluminum-clad steel
Aluminum conductor
28 Overhead Electrical Aluminum Conductors TAIHAN

29. ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Notes : Class AA - For bare conductors usually used in overhead lines.
Class A - For conductors to be covered with weather-resistant materials.
(+) : Indicates conductors with high strength to current capacity ratios.
Conductor Size (Al Wire)
CMILS AWG mm2
Class
No. of
Wires
No. of
Wiresin mm in mm
Nominal Dia. Nominal Dia.
Aluminum Aluminum-clad Steel
kips
(1000 lbf)
kN lb/10000ft kg/km
Stranding Rated Strength Linear Density
666,600
636,000
636,000
636,000
636,000
636,000
636,000
605,000
605,000
605,000
605,000
556,500
556,500
556,500
556,500
477,000
477,000
477,000
477,000
397,500
397,500
397,500
397,500
336,400
336,400
336,400
300,000
266,800
266,800
211,600
211,300
203,200
190,800
176,900
167,800
159,000
337.8
322.3
322.3
322.3
322.3
322.3
322.3
306.6
306.6
306.6
306.6
282.0
282.0
282.0
282.0
241.7
241.7
241.7
241.7
201.4
201.4
201.4
201.4
170.5
170.5
170.5
152.0
135.2
135.2
107.2
107.1
103.0
96.68
89.64
85.02
80.57
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA, A
AA(+)
AA(+)
AA(+)
AA(+)
AA, A
AA(+)
24
30
30
26
24
36
18
30
30
26
24
30
26
24
18
30
26
24
18
30
26
24
18
30
26
18
26
26
18
6
12
16
12
12
6
12
0.1667
0.1456
0.1456
0.1564
0.1828
0.1329
0.1880
0.1420
0.1420
0.1525
0.1588
0.1362
0.1483
0.1523
0.1758
0.1261
0.1354
0.1410
0.1628
0.1151
0.1236
0.1287
0.1486
0.1059
0.1137
0.1367
0.1074
0.1013
0.1217
0.1878
0.1327
0.1127
0.1261
0.1214
0.1672
0.1151
4.234
3.698
3.698
3.973
4.135
3.376
4.775
3.607
3.607
3.873
4.034
3.459
3.716
3.868
4.465
3.203
3.439
3.581
4.135
2.924
3.139
3.269
3.774
2.690
2.888
3.472
2.728
2.573
3.091
4.770
3.371
2.863
3.203
3.084
4.247
2.924
7
19
7
7
7
1
1
19
7
7
7
7
7
7
1
7
7
7
1
7
7
7
1
7
7
1
7
7
1
1
7
19
7
7
1
7
0.1111
0.0874
0.1456
0.1216
0.1085
0.1329
0.1880
0.0852
0.1420
0.1186
0.1059
0.1362
0.1138
0.1015
0.1758
0.1261
0.1053
0.0940
0.1628
0.1151
0.0961
0.0858
0.1486
0.1059
0.0884
0.1367
0.0835
0.0788
0.1217
0.1878
0.1327
0.0977
0.1261
0.1214
0.1672
0.1151
2.822
2.220
3.698
3.089
2.756
3.376
4.775
2.164
3.607
3.012
2.690
3.459
2.891
2.578
4.465
3.203
2.675
2.388
4.135
2.924
2.441
2.179
3.774
2.690
2.245
3.472
2.121
2.002
3.091
4.770
3.371
2.482
3.203
3.084
4.247
2.924
23.1
29.9
29.3
24.8
22.0
13.6
15.0
28.5
28.4
23.6
21.0
26.8
21.9
19.3
13.2
23.4
18.9
16.7
11.5
19.6
15.8
14.1
9.78
16.7
13.5
8.54
12.1
10.8
6.82
7.69
19.8
27.1
18.3
16.9
6.30
15.3
103
133
130
110
98.0
60.6
66.8
126.6
126
105
93.3
119
97.5
85.7
58.9
104
84.3
74.3
51.0
87.4
70.2
62.5
43.5
74.5
60.0
38.0
54.0
48.0
30.3
34.2
88.0
120
81.3
75.4
28.0
68.0
823
928
935
832
785
636
676
883
889
791
747
818
728
687
591
701
624
589
507
584
520
491
422
495
440
357
392
349
283
277
477
601
431
399
219
359
1,224
1,381
1,391
1,238
1,168
946
1,005
1,313
1,323
1,178
1,111
1,217
1,084
1,022
879
1,043
928
876
754
869
773
730
628
736
654
532
584
520
421
411
709
894
641
594
326
534
0000
0000
0000
0000
0000
000
000
(Table 30)
29TAIHAN Overhead Electrical Aluminum Conductors

30. Notes : Class AA - For bare conductors usually used in overhead lines.
Class A - For conductors to be covered with weather-resistant materials.
(+) : Indicates conductors with high strength to current capacity ratios.
Conductor Size (Al Wire)
CMILS AWG mm2
Class
No. of
Wires
No. of
Wiresin mm in mm
Nominal Dia. Nominal Dia.
Aluminum Aluminum-clad Steel
kips
(1000 lbf)
kN lb/10000ft kg/km
Stranding Rated Strength Linear Density
152,500
141,300
134,600
133,100
121,000
112,100
110,800
105,600
101,800
99,830
95,910
88,840
83,690
80,000
79,130
76,080
70,480
66,360
66,360
64,920
62,770
60,340
55,890
52,620
51,500
49,780
47,850
44,320
41,740
41,740
40,840
39,470
37,950
35,150
32,390
31,300
25,690
77.27
71.60
68.20
67.44
61.31
56.80
56.14
53.51
51.58
50.58
48.60
45.02
42.41
40.54
40.10
38.55
35.71
33.62
33.62
32.89
31.81
30.57
28.32
26.66
26.10
25.22
24.25
22.46
21.15
21.15
20.69
20.00
19.23
17.81
16.41
15.86
13.02
AA(+)
AA(+)
AA(+)
AA,A
AA(+)
AA(+)
AA(+)
AA,A
AA(+)
AA(+)
AA(+)
AA(+)
AA,A
AA(+)
AA(+)
AA(+)
AA(+)
AA,A
AA,A
AA(+)
AA(+)
AA(+)
AA(+)
A
AA(+)
AA(+)
AA(+)
AA(+)
AA,A
AA,A
AA(+)
AA(+)
AA(+)
AA(+)
AA(+)
AA(+)
AA(+)
5
4
12
6
5
4
12
6
12
3
5
4
6
8
3
5
4
7
6
2
3
5
4
6
2
3
5
4
7
6
2
3
5
4
2
3
2
0.1747
0.1880
0.1059
0.1489
0.1556
0.1674
0.0961
0.1327
0.0921
0.1824
0.1385
0.1490
0.1181
0.1000
0.1624
0.1234
0.1327
0.0974
0.1052
0.1802
0.1446
0.1099
0.1182
0.0937
0.1605
0.1288
0.0978
0.1053
0.0772
0.0834
0.1429
0.1147
0.0871
0.0937
0.1273
0.1022
0.1133
4.437
4.775
2.690
3.782
3.952
4.252
2.441
3.371
2.339
4.633
3.518
3.785
3.000
2.540
4.125
3.134
3.371
2.474
2.672
4.577
3.673
2.791
3.002
2.380
4.077
3.272
2.484
2.675
1.961
2.118
3.630
2.913
2.212
2.380
3.233
2.596
2.878
2
3
7
1
2
3
7
1
7
4
2
3
1
1
4
2
3
1
1
5
4
2
3
1
5
4
2
3
1
1
5
4
2
3
5
4
5
0.1747
0.1880
0.1059
0.1489
0.1556
0.1674
0.0961
0.1327
0.0921
0.1824
0.1385
0.1490
0.1181
0.1670
0.1624
0.1234
0.1327
0.1299
0.1052
0.1802
0.1446
0.1099
0.1182
0.0937
0.1605
0.1288
0.0978
0.1053
0.1029
0.0834
0.1429
0.1147
0.0871
0.0937
0.1273
0.1022
0.1133
4.437
4.775
2.690
3.782
3.952
4.252
2.441
3.371
2.339
4.633
3.518
3.785
3.000
4.242
4.125
3.134
3.371
3.299
2.672
4.577
3.673
2.791
3.002
2.380
4.077
3.272
2.484
2.675
2.614
2.118
3.630
2.913
2.212
2.380
3.233
2.596
2.878
9.66
14.2
13.0
5.13
8.03
11.9
10.8
4.25
9.91
16.4
6.58
9.68
3.45
4.89
13.8
5.45
8.10
3.51
2.76
19.5
11.2
4.37
6.60
2.23
16.5
9.69
3.50
5.26
2.28
1.78
13.5
7.72
2.79
4.19
11.3
6.13
8.96
43.0
62.9
57.8
22.8
35.7
52.7
48.0
18.9
44.1
72.7
29.3
43.0
15.3
21.7
61.2
24.3
36.0
15.6
12.3
86.9
50.0
19.4
29.4
9.92
73.3
43.1
15.6
23.4
10.1
7.93
59.9
34.3
12.4
18.6
50.3
27.3
39.9
281
373
304
174
223
296
250
138
230
395
177
234
109
138
313
140
186
100
86.8
430
248
111
147
69
341
197
88.0
117
62.7
54.5
270
156
69.8
92.6
215
124
170
418
555
452
259
332
440
372
205
342
588
263
348
163
205
466
209
276
149
129
640
369
165
219
102
508
293
131
174
93.3
81.1
402
232
104
138
319
185
253
000
000
000
00
00
00
00
0
0
0
0
0
1
1
1
1
1
2
2
2
2
2
2
3
3
3
3
3
4
4
4
4
4
4
4
4
4
(Table 30)
30 Overhead Electrical Aluminum Conductors TAIHAN

31. Stranded Aluminum-clad Steel ConductorAWS
ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Application
This standard covers stranded aluminum-clad steel conductors to be
used mainly for overhead ground wire.
Construction
Stranded aluminum-clad steel conductor
Standards
Conforms to ASTM B 416-93
Coefficient of linear expansion 0.0000072/ 0.0000126/
Final modulus of elasticity 23,000,000psi(160GPa)
Temperature coefficient of resistance 0.0020/ 0.0036/
Conductivity 20.3%
No. and
Size of
Wires
Min.
Breaking
Strength
(lb)
Nominal
Dia.
(in)
No. and Dia. of
Individual Wires
Linear Density
Max.
Resistance
( /1000ft, 20 )
Nominal
Cross Section
Number
(No.)
Nominal Dia.
(in)
lb/1000ft lb/mile CMILS sq in
37 No. 5AWG
37 No. 6AWG
37 No. 7AWG
37 No. 8AWG
37 No. 9AWG
37 No.10AWG
19 No. 5AWG
19 No. 6AWG
19 No. 7AWG
19 No. 8AWG
19 No. 9AWG
19 No.10AWG
7 No. 5AWG
7 No. 6AWG
7 No. 7AWG
7 No. 8AWG
7 No. 9AWG
7 No.10AWG
7 No.11AWG
7 No.12AWG
3 No. 5AWG
3 No. 6AWG
3 No. 7AWG
3 No. 8AWG
3 No. 9AWG
3 No.10AWG
37
37
37
37
37
37
19
19
19
19
19
19
7
7
7
7
7
7
7
7
3
3
3
3
3
3
0.1819
0.1620
0.1443
0.1285
0.1144
0.1019
0.1819
0.1620
0.1443
0.1285
0.1144
0.1019
0.1819
0.1620
0.1443
0.1285
0.1144
0.1019
0.0907
0.0808
0.1819
0.1620
0.1443
0.1285
0.1144
0.1019
1.27
1.13
1.01
0.899
0.801
0.713
0.910
0.810
0.721
0.642
0.572
0.509
0.546
0.486
0.433
0.385
0.343
0.306
0.272
0.242
0.392
0.349
0.311
0.277
0.247
0.220
142,800
120,200
100,700
84,200
66,770
52,950
73,350
61,700
51,730
43,240
34,290
27,190
27,030
22,730
19,060
15,930
12,630
10,020
7,945
6,301
12,230
10,280
8,621
7,206
5,715
4,532
2,802
2,222
1,762
1,398
1,108
879.0
1,430
1,134
899.5
713.5
565.8
448.7
524.9
416.3
330.0
261.8
207.6
164.7
130.6
103.6
224.5
178.1
141.2
112.0
88.81
70.43
14,800
11,730
9,305
7,379
5,852
4,641
7,552
5,990
4,750
3,767
2,987
2,369
2,772
2,198
1,743
1,382
1,096
869.4
689.4
546.8
1,186.0
940.2
745.6
591.3
468.9
371.8
0.04247
0.05356
0.06754
0.08516
0.1074
0.1354
0.08224
0.1037
0.1308
0.1649
0.2079
0.2622
0.2264
0.2803
0.3535
0.4458
0.5621
0.7088
0.8938
1.127
0.5177
0.6528
0.8232
1.038
1.309
1.651
1,225,000
971,300
770,300
610,900
484,400
384,200
628,900
498,800
395,500
313,700
248,800
197,300
231,700
183,800
145,700
115,600
91,650
72,680
57,590
45,710
99,310
78,750
62,450
49,530
39,280
31,150
0.9619
0.7629
0.6050
0.4798
0.3805
0.3017
0.4940
0.3917
0.3107
0.2464
0.1954
0.1549
0.1820
0.1443
0.1145
0.09077
0.07198
0.05708
0.04523
0.03590
0.07800
0.06185
0.04905
0.03890
0.03085
0.02446
(Table 31)
Aluminum
Steel
31TAIHAN Overhead Electrical Aluminum Conductors

32. Hard-drawn Aluminum Wires for Electric PurposesAL-ALLOY
Diameter Min. Tensile Strength
Individual Tests
(%)
Tolerance
on Dia.
( %, or in)
Min. Elongation
in 10 in or
250mm
in
ksi MPa ksi MPa
mm
Average for a Lot Individual Tests
0.1878 to 0.1328
0.1327 to 0.0612
4.770 to 3.373
3.371 to 1.554
1%
0.0010 in
46
48
317
331
44
46
303
317
3.0
3.0
(Table 32)Tensile Requirements
Material
Volume
Conductivity
(% IACS) cmil/ft mm2
/m in cm
(Table 33)Equivalent Resistivity Values at 20°C(68°F)
Resistivity Constants
Volume
Copper
Aluminum
Aluminum
Aluminum
100
61.0
53.5
52.5
10.371
17.002
19.385
19.755
0.017241
0.028265
0.032227
0.32841
0.67879
1.1128
1.2687
1.2929
1.7241
2.8265
3.2227
3.2841
Application
This standard covers aluminum-alloy(hard:solution, heat-treated, cold
worked, and artificially aged) round wires for electrical purposes to be
used mainly as component wires of Al-alloy stranded cables and Al-
alloy cables steel reinforced.
Construction
Single aluminum-alloy conductor
Standards
Conforms to ASTM B 398-97
32 Overhead Electrical Aluminum Conductors TAIHAN

33. Stranded Aluminum-alloy 6201-T81 ConductorsAAAC
ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Application
This standard covers stranded aluminum-alloy 6201-T81 conductors
which could high tensile load to be used mainly for overhead
distribution wire.
Construction
Stranded aluminum-alloy conductor
Standards
Conforms to ASTM B 399-97
Notes : Class AA - For bare conductors usually used in overhead lines.
Class A - For conductors to be covered with weather-resistant materials.
Code
Word
CMILS mm2
CMILSA
AWG mm2
Conductor
Size
Approx. Aluminum
1350 Size having
Equivalent Resistance
Size and Stranding of
ACSR with Equal Dia.
Required Construction Weight
Rated
Strength
Resis-
tance
Size CMILSA
AWG kg/km kips kNClassmm2
in mm
Strand
-ing
No. of
Wires
lb/
1000ft
Dia. of Wires ( /1000ft,
20 )
-
-
-
-
-
Greely
Flint
Elgin
Darien
Cairo
Canton
Butte
Alliance
Amherst
Anaheim
Azusa
Ames
Alton
Akron
1,439,200
1,348,800
1,259,600
1,165,100
1,077,400
927,200
740,800
652,400
559,500
465,400
394,500
312,800
246,900
195,700
155,400
123,300
77,470
48,690
30,580
729.2
683.4
638.2
590.3
545.9
469.8
375.4
330.6
283.5
235.8
199.9
158.5
125.1
99.2
78.7
62.5
39.3
24.7
15.5
0000
000
00
0
2
4
6
644.5
604.2
564.0
523.7
483.4
402.8
322.3
282.0
241.7
201.4
170.5
135.2
107.2
85.0
67.4
53.5
33.6
21.1
13.3
1,272,000
1,192,500
1,113,000
1,033,500
954,000
795,000
636,000
556,500
477,000
397,500
336,400
266,800
211,600
167,800
133,100
105,600
66,360
41,740
26,240
0000
000
00
0
2
4
6
644.5
604.2
564.0
523.7
483.4
402.8
322.3
282.0
241.7
201.4
170.5
135.2
107.2
85.0
67.4
53.5
33.6
21.1
13.3
54/7
54/7
54/7
54/7
54/7
26/7
26/7
26/7
26/7
26/7
26/7
26/7
6/1
6/1
6/1
6/1
6/1
6/1
6/1
61
61
61
61
61
37
37
19
19
19
19
19
7
7
7
7
7
7
7
0.1536
0.1487
0.1437
0.1382
0.1329
0.1583
0.1415
0.1853
0.1716
0.1565
0.1441
0.1283
0.1878
0.1672
0.1490
0.1327
0.1052
0.0834
0.0661
3.90
3.78
3.65
3.51
3.38
4.02
3.59
4.71
4.36
3.98
3.66
3.26
4.77
4.25
3.78
3.37
2.67
2.12
1.68
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA
AA, A
A
AA
AA, A
AA, A
AA, A
AA, A
A
A
1,342
1,258
1,175
1,086
1,005
864.6
690.8
608.3
521.7
433.9
367.9
291.6
230.2
182.5
144.9
114.9
72.24
45.40
28.52
1,997
1,872
1,748
1,617
1,495
1,287
1,028
905.2
776.3
645.7
547.4
434.0
342.6
271.5
215.6
171.0
107.5
67.56
42.44
46.8
43.9
41.0
37.9
35.0
30.5
24.4
21.9
18.8
15.6
13.3
11.0
8.56
6.79
5.39
4.46
2.80
1.76
1.11
208
195
182
169
156
136
108
97.5
83.6
69.6
59.0
48.8
38.1
30.2
24.0
19.8
12.5
7.84
4.92
0.0140
0.0149
0.0160
0.0173
0.0187
0.0217
0.0272
0.0309
0.0360
0.0433
0.0511
0.0644
0.0816
0.103
0.130
0.163
0.260
0.414
0.659
1,272,000
1,192,500
1,113,000
1,033,500
954,000
795,000
636,000
556,500
477,000
397,500
336,400
266,800
211,600
167,800
133,100
105,600
66,360
41,740
26,240
(Table 34)
33TAIHAN Overhead Electrical Aluminum Conductors

34. High-strength Zinc-coated Steel Core Wire for Aluminum
and Aluminum-alloy Conductors, Steel ReinforcedH.S-ACSR
Note : The above sizes are those commonly used.
Application
This standard covers round, high-stength, zinc-coated, steel core wire
with class A zinc coating used for mechanical reinforcement in the
manufacture of special Al and Al-alloy conductors, steel reinforced.
Construction
The center wire or wires are of high-strength galvanized steel and the
outer layer or layers of special aluminum.
Standards
Conforms to ASTM B 606-93
ACSR Copper
Equivalent
(MCM or AWG)
No. and Dia. of Strands
(in)
Diameter
(in)
Cross Section
Total
sq in Al St
Complete
Conductor
Steel
Core
Aluminum
sq inMCM or AWG
Code
Word
Grouse
Petrel
Minorca
Leghorn
Guinea
Dotterel
Dorking
Brahma
Cochin
80
101.8
110.8
134.6
159
176.9
190.8
203.2
211.3
0.0628
0.0800
0.0870
0.1057
0.1249
0.1389
0.1499
0.1596
0.1660
0.0847
0.1266
0.1378
0.1674
0.1977
0.2199
0.2373
0.3020
0.2628
50.31
64.16
69.7
84.6
100
111.2
120.0
127.8
132.9
0.367
0.461
0.481
0.530
0.576
0.607
0.631
0.714
0.664
0.1670
0.2763
0.2883
0.3177
0.3453
0.3642
0.3783
0.4885
0.3981
8 0.1000
12 0.0921
12 0.0961
12 0.1059
12 0.1151
12 0.1214
12 0.1261
16 0.1127
12 0.1327
1 0.1670
7 0.0921
7 0.0961
7 0.1059
7 0.1151
7 0.1214
7 0.1261
19 0.0977
7 0.1327
(Table 35)
Weight(pound) Total Weight
(%)
Ultimate Strength (pound)
Zinc-coated Core
Calculated
Resistance
at 20°C
(68°F)
( /1000ft)
Per 1000ft Per mile
Code
Word
Al Total Al Total Al St
Standard
Weight
Coating
Class B
Coating
Class C
Coating
Grouse
Petrel
Minorca
Leghorn
Guinea
Dotterel
Dorking
Brahma
Cochin
75.1
96.0
104.5
127.0
150.0
166.9
180.0
191.7
199.3
149.0
254.1
276.6
336.0
396.8
441.5
476.3
676.6
527.5
397
507
552
671
792
881
950
1,012
1,052
787
1,342
1,640
1,774
2,095
2,331
2,525
3,573
2,785
50.4
37.8
37.8
37.8
37.8
37.8
37.8
28.3
37.8
49.6
62.2
62.2
62.2
62.2
62.2
62.2
71.7
62.2
5,200
9,860
10,730
12,920
15,200
16,400
17,730
27,500
19,640
4,655
9,615
10,480
12,620
14,850
15,640
16,860
26,800
18,700
4,550
9,385
10,220
12,310
14,880
14,830
16,000
26,100
17,700
0.217
0.171
0.157
0.129
0.110
0.0985
0.0913
0.0723
0.0825
(Table 36)
High-strength
Galvanized steel
Aluminum conductor
34 Overhead Electrical Aluminum Conductors TAIHAN

35. “EC” Grade Aluminum Conductor Constructions,
Weather-resistant Wire and CableHAL-OC
ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Application
This standard covers HAL-OC(for use in 6,600 volts circuits) to be used
as weather-resistant wire and cable for the distribution of electrical
energy under the normal conditions of overhead line service.
Construction
Solid or stranded hard-drawn aluminum conductor and polyethylene
cross linked polyethylene insulation
Standards
Conforms to ANSI C 8.35-1975, ICEA S-70-547
Add “HD” to code word to designated high-density polyethylene covering, or “XLPE” to designate cross-linked thermosetting polyethylene covering.
Code Word
AWG or MCM
CMILS mm2
Cross Sectional Area No. of Wires
mils mm
Conductor Covering Thickness
Cumquat
Apple
Plum
Pear
Apricot
Cherry
Peach
Nectarine
Quince
Haw
Orange
Ironwood
Fig
Lemon
Olive
Pomegranate
Sassafras
Catalpa
Mulberry
Silverbelt
Basswood
Sycamore
Anona
Crabapple
Chinquapin
Ginkgo
Molles
Ash
Sumac
Huckleberry
Tupelo
Paw Paw
Tangerine
Breadfruit
Persimmon
Grapefruit
Mango
8
6
6
4
4
2
2
1
1/0
1/0
2/0
2/0
3/0
3/0
4/0
4/0
250
250
266.8
266.8
300
300
336.4
336.4
350
350
397.5
400
450
477
500
556
636
636
795
1,033.5
1,590
16,510
26,240
26,240
41,740
41,740
66,360
66,360
83,690
105,600
105,600
133,100
133,100
167,800
167,800
211,600
211,600
8.367
13.30
13.30
21.15
21.15
33.62
33.62
42.41
53.49
53.49
67.43
67.43
85.01
85.01
107.2
107.2
127
127
135
135
152
152
170
170
177
177
201
203
228
242
253
282
322
322
403
523
806
Solid
Solid
7
Solid
7
Solid
7
7
7
19
7
19
7
19
7
19
19
19
19
19
19
19
19
19
19
19
19
19
37
37
37
37
37
61
61
61
61
30
30
30
30
30
45
45
45
60
60
60
60
60
60
60
60
60
75
60
75
60
75
60
75
60
75
75
75
75
75
75
75
95
95
95
95
110
0.76
0.76
0.76
0.76
0.76
1.14
1.14
1.14
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.52
1.90
1.52
1.90
1.52
1.90
1.52
1.90
1.52
1.90
1.90
1.90
1.90
1.90
1.90
1.90
2.41
2.41
2.41
2.41
2.79
(Table 37)
Aluminum conductor
XLPE insulation
35TAIHAN Overhead Electrical Aluminum Conductors

36. Aluminum, Steel-reinforced(ACSR) Conductor
Weather-resistant Insulation WiresACSR/OC
Application
This standard covers ACSR-OC(for use in 6,600 volts circuits) to be
used as weather-resistant cable for the distribution of electrical energy
under the normal conditions of overhead line service.
Construction
Aluminum, steel-reinforced conductor and polyethylene or cross-linked
polyethylene insulation
Standards
Conforms to ANSI C 8.35-1975, ICEA S-70-547
Galvanized steel
XLPE insulation
Aluminum conductor
Code Word
AWG or MCM
CMILS mm2
Aluminum Cross Sectional Area Strands Al/St
mils mm
Conductor Covering Thickness
Walnut
Acorn
Butternut
Hickory
Hazelnut
Pignut
Beech
Chestnut
Almond
Pecan
Cottonwood
Filbert
Chokeberry
Buckeye
Gumwood
Hackberry
Redbud
Mockernut
Aspen
6
5
4
4
3
2
2
1
1/0
2/0
2/0
3/0
3/0
4/0
4/0
266.8
266.8
336.4
336.4
26,240
33,090
41,740
41,740
52,620
66,360
66,360
83,690
105,600
133,100
133,100
167,800
167,800
211,600
211,600
13.30
16.77
21.15
21.15
26.67
33.62
33.62
42.41
53.49
67.43
67.43
85.01
85.01
107.2
107.2
135
135
170
170
6/1
6/1
6/1
7/1
6/1
6/1
7/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
18/1
18/1
18/1
18/1
30
30
30
30
45
45
45
45
60
60
75
60
75
60
75
60
75
60
75
0.76
0.76
0.76
0.76
1.14
1.14
1.14
1.14
1.52
1.52
1.90
1.52
1.90
1.52
1.90
1.52
1.90
1.52
1.90
(Table 38)
Add “HD” to code word to designated high-density polyethylene covering, or “XLPE” to designate cross-linked thermosetting polyolefin covering.
36 Overhead Electrical Aluminum Conductors TAIHAN

37. ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Electrical Conductors, Covered Line Wire and Multiplex Types
Weather-resistant Line Wire
Note : Items shown in colored type are normally used.
(Table 39)
POLYETHYLENE TYPE
Al Total
Code Word CMILS or AWG Stranding
Cover Thickness
64th
(in)
Nominal Weight
(pound/1000ft)
Length per Reel
(ft)
Solid Aluminum Conductor
Apple
Pear
Cherry
6
4
2
1
1
1
2
2
3
24.2
38.4
61.1
31.7
48.0
79.2
12,000
8,500
5,000
(Table 42)
CROSS-LINKED POLYETHYLENE(XLPE) TYPE
Al Total
Code Word CMILS or AWG Stranding
Cover Thickness
64th
(in)
Nominal Weight
(pound/1000ft)
Length per Reel
(ft)
Solid Aluminum Conductor
Apple/XLPE
Pear/XLPE
Cherry/XLPE
6
4
2
1
1
1
2
2
3
24.2
38.4
61.1
34
50
83
12,000
8,500
5,000
(Table 41)ACSR
Walnut
Butternut
Hickory
Pignut
Beech
Chestnut
Almond
Pecan
Filbert
Buckeye
Hackberry
6
4
4
2
2
1
1/0
2/0
3/0
4/0
266,800
6/1
6/1
7/1
6/1
7/1
6/1
6/1
6/1
6/1
6/1
18/1
2
2
2
3
3
3
4
4
4
4
4
24.5
39.0
39.0
62.0
62.0
78.2
98.6
124.3
156.8
197.7
250.4
47.5
72.0
82.0
119.0
135.0
146.0
191.0
235.0
290.0
359.0
357.0
8,000
5,100
6,000
6,400
5,600
5,100
4,000
3,200
3,800
3,000
2,400
(Table 43)Stranded Aluminum Conductor
Plum/XLPE
Apricot/XLPE
Peach/XLPE
Nectarine/XLPE
Quince/XLPE
Orange/XLPE
Fig/XLPE
Olive/XLPE
Pomegranate/XLPE
6
4
2
1
1/0
2/0
3/0
4/0
4/0
7
7
7
7
7
7
7
7
19
2
2
3
3
4
4
4
4
4
24.6
39.2
62.3
78.5
99.1
124.9
157.5
198.6
198.6
37
55
93
113
150
183
223
274
266
9,400
7,000
7,500
6,000
4,700
3,750
4,400
3,500
3,800
(Table 40)Stranded Aluminum Conductor
Plum
Apricot
Peach
Nectarine
Quince
Orange
Fig
Olive
Pomegranate
Mulberry
Anona
Crabapple
Molles
Huckleberry
Paw Paw
Braedfruit
Persimmon
Grapefruit
6
4
2
1
1/0
2/0
3/0
4/0
4/0
266,800
336,400
336,400
397,500
477,000
556,500
636,000
795,000
1,033,500
7
7
7
7
7
7
7
7
19
19
19
19
19
37
37
61
61
61
2
2
3
3
4
4
4
4
4
4
4
5
5
5
5
6
6
6
24.6
39.2
62.3
78.5
99.1
124.9
157.5
198.6
198.6
250.4
315.8
315.8
372.5
447.8
522.4
597.0
746.3
970.1
35.0
53.3
87.4
107.0
140.0
172.0
211.0
260.0
255.0
315.0
390.0
404.0
471.0
550.0
635.0
740.0
900.0
1,150.0
9,400
7,000
7,500
6,000
4,700
3,750
4,400
3,500
3,800
3,000
2,400
2,000
2,000
3,300
2,800
2,500
2,200
1,700
37TAIHAN Overhead Electrical Aluminum Conductors

38. Electrical Conductors, Covered Line Wire and Multiplex Types
Self-supporting Secondary and Service Drop Cable
(Table 44)
POLYETHYLENE DUPLEX TYPE
Code Word
AWG Stranding
AWG Stranding Al Total
Insulation
Thickness 64th
Phase Conductors Bare Neutral
Messenger
Nominal Weight
(lb/1000ft)
Length
per Reel
(ft)
All-aluminum Neutral Messenger
Pekingese
Collie
Dachshund
Spaniel
Doberman
Malemute
6
6
4
4
2
1/0
1
7
1
7
7
19
3
3
3
3
3
4
6
6
4
4
2
1/0
7
7
7
7
7
7
49
49
78
78
125
198
63
66
95
100
152
244
3,000
2,800
2,200
2,000
2,400
1,500
(Table 45)ACSR Neutral Messenger
Setter
Shepherd
Eskimo
Terrier
Chow
Bull
6
6
4
4
2
1/0
1
7
1
7
7
19
3
3
3
3
3
4
6
6
4
4
2
1/0
6/1
6/1
6/1
6/1
6/1
6/1
49
49
77
78
124
198
75
78
114
118
181
289
3,000
2,800
2,200
2,000
2,400
1,500
(Table 46)
CROSS-LINKED POLYETHYLENE(XLPE) DUPLEX TYPE
Code Word
AWG Stranding
AWG Stranding Al Total
Insulation
Thickness 64th
Phase Conductors Bare Neutral
Messenger
Nominal Weight
(lb/1000ft)
Length
per Reel
(ft)
All-aluminum Neutral Messenger
Pekingese/XLPE
Collie/XLPE
Dachshund/XLPE
Spaniel/XLPE
Doberman/XLPE
Malemute/XLPE
6
6
4
4
2
1/0
1
7
1
7
7
19
3
3
3
3
3
4
6
6
4
4
2
1/0
7
7
7
7
7
7
49
49
78
78
125
198
64
68
96
103
156
246
3,000
2,800
2,200
2,000
2,400
1,500
(Table 47)ACSR Neutral Messenger
Setter/XLPE
Shepherd/XLPE
Eskimo/XLPE
Terrier/XLPE
Chow/XLPE
Bull/XLPE
6
6
4
4
2
1/0
1
7
1
7
7
19
3
3
3
3
3
4
6
6
4
4
2
1/0
6/1
6/1
6/1
6/1
6/1
6/1
49
49
77
78
124
198
75
80
114
121
185
282
3,000
2,800
2,200
2,000
2,400
1,500
Note : Items shown in colored type are normally used.
38 Overhead Electrical Aluminum Conductors TAIHAN

39. ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Electrical Conductors, Covered Line Wire and Multiplex Types
Self-supporting Secondary and Service Drop Cable
(Table 48)
POLYETHYLENE TRIPLEX TYPE
Code Word
AWG Stranding
AWG Stranding Al Total
Insulation
Thickness 64th
Phase Conductors Bare Neutral
Messenger
Nominal Weight
(lb/1000ft)
Length
per Reel
(ft)
All-aluminum Neutral Messenger
6
4
4
2
1/0
1/0
2/0
2/0
3/0
4/0
1
1
7
7
7
19
7
19
19
19
3
3
3
3
4
4
4
4
4
4
6
4
4
2
1/0
1/0
2/0
2/0
3/0
4/0
7
7
7
7
7
7
7
7
19
19
73
116
118
187
297
297
375
375
473
596
100
151
161
240
395
390
486
478
583
722
2,500
1,700
1,500
1,800
1,200
1,200
1,500
1,500
1,300
1,000
Haiotis
Fusus
Oyster
Clam
Murex
Purpura
Nassa
Trophon
Melita
Portunus
(Table 49)ACSR Neutral Messenger
Paludina
Voluta
Whelk
Periwinkle
Conch
Neritina
Cenia
Runcina
Triton
Mursia
Zuzara
6
6
4
4
2
1/0
1/0
2/0
2/0
3/0
4/0
1
7
1
7
7
7
19
7
19
19
19
3
3
3
3
3
4
4
4
4
4
4
6
6
4
4
2
1/0
1/0
2/0
2/0
3/0
4/0
6/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
73
74
116
118
187
297
297
374
374
472
596
112
120
170
180
270
431
426
544
536
657
814
2,500
2,000
1,700
1,500
1,800
1,200
1,200
1,500
1,500
1,300
1,000
(Table 50)
CROSS-LINKED POLYETHYLENE(XLPE) TRIPLEX TYPE
Code Word
AWG Stranding
AWG Stranding Al Total
Insulation
Thickness 64th
Phase Conductors Bare Neutral
Messenger
Nominal Weight
(lb/1000ft)
Length
per Reel
(ft)
All-aluminum Neutral Messenger
6
4
4
2
1/0
1/0
2/0
2/0
3/0
4/0
1
1
7
7
7
19
7
19
19
19
3
3
3
3
4
4
4
4
4
4
6
4
4
2
1/0
1/0
2/0
2/0
3/0
4/0
7
7
7
7
7
7
7
7
19
19
73
116
118
187
297
297
375
375
473
596
103
154
166
249
400
393
480
483
595
734
2,500
1,700
1,500
1,800
1,200
1,200
1,500
1,500
1,300
1,000
Haiotis/XLPE
Fusus/XLPE
Oyster/XLPE
Clam/XLPE
Murex/XLPE
Purpura/XLPE
Nassa/XLPE
Trophon/XLPE
Melita/XLPE
Portunus/XLPE
(Table 51)ACSR Neutral Messenger
Paludina/XLPE
Voluta/XLPE
Whelk/XLPE
Periwinkle/XLPE
Conch/XLPE
Neritina/XLPE
Cenia/XLPE
Runcina/XLPE
Triton/XLPE
Mursia/XLPE
Zuzara/XLPE
6
6
4
4
2
1/0
1/0
2/0
2/0
3/0
4/0
1
7
1
7
7
7
19
7
19
19
19
3
3
3
3
3
4
4
4
4
4
4
6
6
4
4
2
1/0
1/0
2/0
2/0
3/0
4/0
6/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
73
74
116
118
187
297
297
374
374
472
596
115
124
172
184
278
446
439
498
541
668
827
2,500
2,000
1,700
1,500
1,800
1,200
1,200
1,500
1,500
1,300
1,000
39TAIHAN Overhead Electrical Aluminum Conductors

40. Electrical Conductors, Covered Line Wire and Multiplex Types
Self-supporting Secondary and Service Drop Cable
(Table 52)
POLYETHYLENE QUADRUPLEX TYPE
Code Word
AWG Stranding
AWG Stranding Al Total
Insulation
Thickness 64th
Phase Conductors Bare Neutral
Messenger
Nominal Weight
(lb/1000ft)
Length
per Reel
(ft)
All-aluminum Neutral Messenger
Clydesdale
Pinto
Mustang
Criollo
Percheron
Hanoverion
Oldenburg
4
4
2
1/0
2/0
3/0
4/0
1
7
7
19
19
19
19
3
3
3
4
4
4
4
4
4
2
1/0
2/0
3/0
4/0
7
7
7
7
7
19
19
154
157
249
396
500
630
795
207
220
330
535
655
806
993
1,700
1,500
1,800
1,100
1,500
1,300
1,000
(Table 53)ACSR Neutral Messenger
Morochuca
Chola
Morgan
Hackney
Palomino
Costena
Grullo
Suffolk
Appaloosa
6
6
4
4
2
1/0
2/0
3/0
4/0
1
7
1
7
7
19
19
19
19
3
3
3
3
3
4
4
4
4
6
6
4
4
2
1/0
2/0
3/0
4/0
6/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
97
98
154
157
249
396
499
629
794
151
163
225
245
370
580
715
879
1,087
2,500
2,000
1,700
1,500
1,800
1,100
1,500
1,300
1,000
(Table 54)
CROSS-LINKED POLYETHYLENE(XLPE) QUADRUPLEX TYPE
Code Word
AWG Stranding
AWG Stranding Al Total
Insulation
Thickness 64th
Phase Conductors Bare Neutral
Messenger
Nominal Weight
(lb/1000ft)
Length
per Reel
(ft)
All-aluminum Neutral Messenger
Clydesdale/XLPE
Pinto/XLPE
Mustang/XLPE
Criollo/XLPE
Percheron/XLPE
Hanoverion/XLPE
Oldenburg/XLPE
4
4
2
1/0
2/0
3/0
4/0
1
7
7
19
19
19
19
3
3
3
4
4
4
4
4
4
2
1/0
2/0
3/0
4/0
7
7
7
7
7
19
19
154
157
249
396
500
630
795
202
219
329
521
641
791
977
1,700
1,500
1,800
1,100
1,500
1,300
1,000
(Table 55)ACSR Neutral Messenger
Morochuca/XLPE
Chola/XLPE
Morgan/XLPE
Hackney/XLPE
Palomino/XLPE
Costena/XLPE
Grullo/XLPE
Suffolk/XLPE
Appaloosa/XLPE
6
6
4
4
2
1/0
2/0
3/0
4/0
1
7
1
7
7
19
19
19
19
3
3
3
3
3
4
4
4
4
6
6
4
4
2
1/0
2/0
3/0
4/0
6/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
6/1
97
98
154
157
249
396
499
629
794
148
159
221
238
359
568
700
864
1,070
2,500
2,000
1,700
1,500
1,800
1,100
1,500
1,300
1,000
One phase wire identified with ridges.
40 Overhead Electrical Aluminum Conductors TAIHAN

41. International Electrotechnical Commission IEC
41TAIHAN Overhead Electrical Aluminum Conductors

42. Stranded Hard-drawn Aluminum ConductorAAC
Application
This standard covers stranded hard-drawn circular aluminum
conductors to be used mainly for overhead distribution wires, overhead
feeder.
Construction
Stranded hard-drawn aluminum conductors
Standards
Conforms to IEC 1089-91
Code
Number
(No.)
Area
(mm2
)
No. of
Wires
(No.)
Linear
Mass
(kg/km)
Rated
Strength
(kN)
D.C.
Resistance
( /km)Wire Conductor
Diameter
(mm)
10
16
25
40
63
100
125
160
200
250
315
400
450
500
560
630
710
800
900
1,000
1,120
1,250
1,400
1,500
10
16
25
40
63
100
125
160
200
250
315
400
450
500
560
630
710
800
900
1,000
1,120
1,250
1,400
1,500
7
7
7
7
7
19
19
19
19
19
37
37
37
37
37
61
61
61
61
61
91
91
91
91
1.35
1.71
2.13
2.70
3.39
2.59
2.89
3.27
3.66
4.09
3.29
3.71
3.94
4.15
4.39
3.63
3.85
4.09
4.33
4.57
3.96
4.18
4.43
4.58
4.05
5.12
6.40
8.09
10.2
12.9
14.5
16.4
18.3
20.5
23.0
26.0
27.5
29.0
30.7
32.6
34.6
36.8
39.0
41.1
43.5
46.0
48.7
50.4
27.4
43.8
68.4
109.4
172.3
274.8
343.6
439.8
549.7
687.1
867.9
1,102.0
1,239.8
1,377.6
1,542.9
1,738.3
1,959.1
2,207.4
2,483.3
2,759.2
3,093.5
3,452.6
3,866.9
4,143.1
1.95
3.04
4.50
6.80
10.39
17.00
21.25
26.40
32.00
40.00
51.97
64.00
72.00
80.00
89.60
100.80
113.60
128.00
144.00
160.00
179.20
200.00
224.00
240.00
2.8633
1.7896
1.1453
0.7158
0.4545
0.2877
0.2302
0.1798
0.1439
0.1151
0.0916
0.0721
0.0641
0.0577
0.0515
0.0458
0.0407
0.0361
0.0321
0.0289
0.0258
0.0231
0.0207
0.0193
(Table 56)
42 Overhead Electrical Aluminum Conductors TAIHAN

43. Stranded Aluminum-alloy ConductorsAAAC
ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Code
Number
(No.)
Area
(mm2
)
No. of
Wires
(No.)
Linear
Mass
(kg/km)
Rated
Strength
(kN)
D.C.
Resistance
( /km)Wire Conductor
Diameter
(mm)
16
25
40
63
100
125
160
200
250
315
400
450
500
560
630
710
800
900
1,000
1,120
18.6
29.0
46.5
73.2
116
145
186
232
290
366
465
523
581
651
732
825
930
1,046
1,162
1,301
7
7
7
7
19
19
19
19
19
37
37
37
37
61
61
61
61
91
91
91
1.84
2.30
2.91
3.65
2.79
3.12
3.53
3.95
4.41
3.55
4.00
4.24
4.47
3.69
3.91
4.15
4.40
3.83
4.03
4.27
5.52
6.90
8.72
10.9
14.0
15.6
17.6
19.7
22.1
24.8
28.0
29.7
31.3
33.2
35.2
37.3
39.6
42.1
44.4
46.9
50.8
79.5
127.1
200.2
319.3
399.2
511.0
638.7
798.4
1,008.4
1,280.5
1,440.5
1,600.6
1,795.3
2,019.8
2,276.2
2,564.8
2,888.3
3,209.3
3,594.4
6.04
9.44
15.10
23.06
37.76
47.20
58.56
73.20
91.50
115.29
146.40
164.70
183.00
204.96
230.58
259.86
292.80
329.40
366.00
409.92
1.7896
1.1453
0.7158
0.4545
0.2877
0.2302
0.1798
0.1439
0.1151
0.0916
0.0721
0.0641
0.0577
0.0516
0.0458
0.0407
0.0361
0.0321
0.0289
0.0258
(Table 57)
Application
This standard covers stranded aluminum-alloy conductors of the
aluminum-magnesium-silicon type which could high tensile load to be
used mainly for overhead distribution wires.
Construction
Stranded aluminum-alloy conductor
Standards
Conforms to IEC 1089-91
43TAIHAN Overhead Electrical Aluminum Conductors

44. Aluminum Conductors, Steel ReinforcedACSR
Application
This standard covers aluminum stranded conductors steel reinforced
which could withstand high tensile load to be used mainly for overhead
transmission lines, overhead distribution lines.
Construction
The center wire or wires are of steel and the outer layer or layers of
aluminum.
Standards
Conforms to IEC 1089-91
Code
Number
Steel
Ratio
Areas
(mm2
)
No. of Wires
(No.)
Wire Dia.
(mm)
Diameter
(mm)
Linear
Mass
Rated
Strength
D.C.
Resistance
(No.) (%) Al St Total Al St Al St Core (kg/km) (kN) ( /km)Conductor
16
25
40
63
100
125
125
160
160
200
200
250
250
315
315
400
400
450
450
500
500
560
560
630
630
710
710
800
800
800
900
900
1,000
1,120
1,120
1,250
1,250
17
17
17
17
17
6
16
6
16
6
16
10
16
7
16
7
13
7
13
7
13
7
13
7
13
7
13
4
8
13
4
8
4
4
8
8
4
16
25
40
63
100
125
125
160
160
200
200
250
250
315
315
400
400
450
450
500
500
560
560
630
630
710
710
800
800
800
900
900
1,000
1,120
1,120
1,250
1,250
2.67
4.17
6.67
10.5
16.7
6.94
20.4
8.89
26.1
11.1
32.6
24.6
40.7
21.8
51.3
27.7
51.9
31.1
58.3
34.6
64.8
38.7
70.9
43.6
79.8
49.1
89.9
34.6
66.7
101
38.9
75.0
43.2
47.3
91.2
102
52.8
18.7
29.2
46.7
73.5
117
132
145
169
186
211
233
275
291
337
366
428
452
481
508
535
565
599
631
674
710
759
800
835
867
901
939
975
1,043
1,167
1,211
1,352
1,303
6
6
6
6
6
18
26
18
26
18
26
22
26
45
26
45
54
45
54
45
54
45
54
45
54
45
54
72
84
54
72
84
72
72
84
84
72
1
1
1
1
1
1
7
1
7
1
7
7
7
7
7
7
7
7
7
7
7
7
19
7
19
7
19
7
7
19
7
7
7
19
19
19
19
1.84
2.30
2.91
3.66
4.61
2.97
2.47
3.36
2.80
3.76
3.13
3.80
3.50
2.99
3.93
3.36
3.07
3.57
3.26
3.76
3.43
3.98
3.63
4.22
3.85
4.48
4.09
3.76
3.48
4.34
3.99
3.69
4.21
4.45
4.12
4.35
4.70
1.84
2.30
2.91
3.66
4.61
2.97
1.92
3.36
2.18
3.76
2.43
2.11
2.72
1.99
3.05
2.24
3.07
2.38
3.26
2.51
3.43
2.65
2.18
2.81
2.31
2.99
2.45
2.51
3.48
2.61
2.66
3.69
2.80
1.78
2.47
2.61
1.88
1.84
2.30
2.91
3.66
4.61
2.97
5.77
3.36
6.53
3.76
7.30
6.34
8.16
5.97
9.16
6.73
9.21
7.14
9.77
7.52
10.3
7.96
10.9
8.44
11.6
8.96
12.3
7.52
10.4
13.0
7.98
11.1
8.41
8.90
12.4
13.1
9.40
5.53
6.91
8.74
11.0
13.8
14.9
15.7
16.8
17.7
18.8
19.8
21.6
22.2
23.9
24.9
26.9
27.6
28.5
29.3
30.1
30.9
31.8
32.7
33.8
34.7
35.9
36.8
37.6
38.3
39.1
39.9
40.6
42.1
44.5
45.3
47.9
47.0
64.6
100.9
161.5
254.4
403.8
397.9
503.9
509.3
644.9
636.7
806.2
880.6
1,007.7
1,039.6
1,269.7
1,320.1
1,510.3
1,485.2
1,699.1
1,650.2
1,887.9
1,848.2
2,103.4
2,079.2
2,366.3
2,343.2
2,666.8
2,480.2
2,732.7
3,004.9
2,790.2
3,074.2
3,100.3
3,464.9
3,811.5
4,253.9
3,867.1
6.08
9.13
14.40
21.63
34.33
29.17
45.69
36.18
57.69
44.22
70.13
68.72
87.67
79.03
106.83
98.36
123.04
107.47
138.42
119.41
153.80
133.74
172.59
150.45
191.77
169.56
216.12
167.41
205.33
243.52
188.33
226.50
209.26
234.53
283.17
316.04
261.75
1.7934
1.1478
0.7174
0.4555
0.2869
0.2304
0.2310
0.1800
0.1805
0.1440
0.1444
0.1154
0.1155
0.0917
0.0917
0.0722
0.0723
0.0642
0.0643
0.0578
0.0578
0.0516
0.0516
0.0459
0.0459
0.0407
0.0407
0.0361
0.0362
0.0362
0.0321
0.0322
0.0289
0.0258
0.0258
0.0232
0.0231
(Table 58)
Galvanized steel
Aluminum conductor
44 Overhead Electrical Aluminum Conductors TAIHAN

45. Aluminum-alloy Conductors,
Extra-high Strength Steel ReinforcedAACSR/EST
ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Application
This standard covers aluminum-alloy(aluminum-magnesium-silicon
type) stranded conductors extra high strength steel with class 1 zinc-
coating reinforced which could withstand extra high tensile load to be
used mainly for overhead transmission lines, overhead distribution lines.
Construction
The center wire or wires are of extra-high strength galvanized steel and
the outer layer or layers of aluminum-alloy.
Standards
Conforms to IEC 1089-91
Code
Number
Steel
Ratio
Areas
(mm2
)
No. of Wires
(No.)
Wire Dia.
(mm)
Diameter
(mm)
Linear
Mass
Rated
Strength
D.C.
Resistance
(No.) (%) Al St Total Al St Al St Core (kg/km) (kN) ( /km)Conductor
16
25
40
63
100
125
125
160
160
200
200
250
250
315
315
400
400
450
450
500
500
560
560
630
630
710
710
800
800
900
900
1,000
1,120
17
17
17
17
6
6
16
6
16
6
16
10
16
7
16
7
13
7
13
7
13
7
13
4
13
4
13
4
8
4
8
8
8
18.6
29.0
46.5
73.2
116
145
145
186
186
232
232
290
290
366
366
465
465
523
523
581
581
651
651
732
732
825
825
930
930
1,046
1,046
1,162
1,301
3.10
4.84
7.75
12.2
6.46
8.07
23.7
10.3
30.3
12.9
37.8
28.5
47.3
25.3
59.6
32.1
60.2
36.1
67.8
40.2
75.3
45.0
82.4
31.6
92.7
35.6
104
40.2
77.5
45.2
87.1
94.6
106
21.7
33.9
54.2
85.4
123
153
169
196
216
245
270
319
338
391
426
497
525
559
591
621
656
696
733
764
825
861
929
970
1,007
1,091
1,133
1,257
1,407
6
6
6
6
18
18
26
18
26
18
26
22
26
45
26
45
54
45
54
45
54
45
54
72
54
72
54
72
84
72
84
84
84
1
1
1
1
1
1
7
1
7
1
7
7
7
7
7
7
7
7
7
7
7
7
19
7
19
7
19
7
7
7
7
19
19
1.99
2.48
3.14
3.94
2.87
3.21
2.67
3.63
3.02
4.05
3.37
4.10
3.77
3.22
4.23
3.63
3.31
3.85
3.51
4.05
3.70
4.29
3.92
3.60
4.15
3.82
4.41
4.05
3.75
4.30
3.98
4.20
4.44
1.99
2.48
3.14
3.94
2.87
3.21
2.07
3.63
2.35
4.05
2.62
2.28
2.93
2.15
3.29
2.42
3.31
2.56
3.51
2.70
3.70
2.86
2.35
2.40
2.49
2.55
2.65
2.70
3.75
2.87
3.98
2.52
2.66
1.99
2.48
3.14
3.94
2.87
3.21
6.22
3.63
7.04
4.05
7.87
6.83
8.80
6.44
9.88
7.25
9.93
7.69
10.5
8.11
11.1
8.58
11.8
7.20
12.5
7.64
13.2
8.11
11.3
8.60
11.9
12.6
13.3
5.96
7.45
9.42
11.8
14.3
16.0
16.9
18.1
19.1
20.3
21.4
23.2
23.9
25.7
26.8
29.0
29.8
30.8
31.6
32.4
33.3
34.3
35.3
36.0
37.4
38.2
39.7
40.5
41.3
43.0
43.8
46.2
48.9
75.1
117.3
187.7
295.6
369.9
462.3
585.4
591.8
749.4
739.8
936.7
1,023.2
1,170.9
1,207.9
1,475.3
1,533.9
1,754.9
1,725.6
1,974.2
1,917.3
2,193.6
2,147.4
2,444.0
2,269.4
2,749.5
2,557.6
3,098.6
2,881.8
3,175.1
3,242.0
3,572.0
3,954.1
4,428.6
10.53
16.27
25.79
39.41
46.86
58.34
81.50
72.40
103.11
90.50
128.89
131.72
158.21
155.64
197.55
191.71
234.19
215.67
255.52
239.63
283.91
268.39
321.17
275.18
361.32
310.12
407.20
349.43
396.60
393.11
446.17
499.40
559.33
1.7934
1.1478
0.7174
0.4555
0.2880
0.2304
0.2310
0.1800
0.1805
0.1440
0.1444
0.1154
0.1155
0.0917
0.0917
0.0722
0.0723
0.0642
0.0643
0.0578
0.0578
0.0516
0.0516
0.0459
0.0459
0.0407
0.0407
0.0361
0.0362
0.0321
0.0322
0.0289
0.0258
(Table 59)
Extra-high strength galvanized steel
Aluminum-alloy conductor
45TAIHAN Overhead Electrical Aluminum Conductors

46. TaihanElectricWire
openingupthehappier
worldandmoreenrichedfuture
46 Overhead Electrical Aluminum Conductors TAIHAN

47. British Standards
Australian Standards
Canadian Standards Association
Deutsches Normen
BS
AS
CSA
DIN
47TAIHAN Overhead Electrical Aluminum Conductors

48. Stranded All-aluminum ConductorsAAC
Aluminum Wires Used in the Construction of Standard Aluminum Stranded Conductors
Application
This standard covers all-aluminum stranded conductors to be used
mainly for overhead distribution wire, overhead feeders and buses.
Construction
All-aluminum stranded conductors
Standards
Conforms to BS 215 : part 1/1970
Code
Word
Nominal
Aluminum
Area
(mm2
)
Equivalent
Area
(HDCC)
(mm2
)
Stranding
& Wire
Dia.
(mm)
Approx.
Overall
Dia.
(mm)
Total
Area
(mm2
)
Weight
(kg/km)
Nominal
Breaking
Load
(kgf)
Max. D.C.
Resistance
( km, 20 ) Temperate Tropical
Rating
(amps)
Midge
Aphis
Gnat
Weevil
Mosquito
Ladybird
Ant
Fly
Bluebottle
Earwig
Grasshopper
Clegg
Wasp
Beetle
Bee
Cricket
Hornet
Caterpillar
Chafer
Spider
Cockroach
Butterfly
Moth
Drone
Locust
Centipede
Maybug
Scorpion
Cicada
Tarantula
22
-
-
-
-
-
50
60
-
-
-
-
100
-
-
-
150
-
200
-
250
300
-
-
-
400
-
-
-
-
14.2
16.1
16.1
19.4
22.6
25.8
32.3
38.7
45.2
48.4
51.6
58.1
64.5
64.5
80.6
96.8
96.8
113.0
129.0
145.0
161.0
194.0
226.0
226.0
258.0
258.0
290.0
323.0
387.0
484.0
7/2.06
3/3.35
7/2.21
3/3.66
7/2.59
7/2.79
7/3.10
7/3.40
7/3.66
7/3.78
7/3.91
7/4.17
7/4.39
19/2.67
7/4.90
7/5.36
19/3.25
19/3.53
19/3.78
19/3.99
19/4.22
19/4.65
19/5.00
37/3.58
19/5.36
37/3.78
37/4.09
37/4.27
37/4.65
37/5.23
6.18
7.2
6.6
7.9
7.8
8.4
9.3
10.2
11.0
11.4
11.7
12.5
13.17
13.4
14.7
16.1
16.25
17.7
18.9
20.0
21.1
23.25
25.0
25.1
26.8
26.46
28.6
29.9
32.6
36.6
23.33
26.4
26.8
31.6
37.0
42.8
52.83
63.55
73.7
78.5
84.1
95.6
106.0
106.6
132.0
157.9
157.6
186.0
213.2
236.9
265.7
322.7
373.2
373.3
428.5
415.2
486.9
529.5
628.6
794.8
64
73
73
86
101
117
145
174
202
215
230
262
290
293
361
432
434
512
587
652
731
888
1,027
1,029
1,179
1,145
1,342
1,460
1,733
2,191
408
419
468
496
617
701
846
1,010
1,158
1,218
1,303
1,482
1,632
1,776
2,083
2,432
2,519
2,920
3,304
3,672
4,120
4,966
5,748
5,858
6,601
6,434
7,547
8,156
9,682
12,247
1.227
1.081
1.068
0.9082
0.7731
0.6694
0.5419
0.4505
0.3884
0.3645
0.3405
0.2994
0.2702
0.2699
0.2169
0.1814
0.1825
0.1547
0.1349
0.1214
0.10830
0.08916
0.07709
0.07723
0.06714
0.06844
0.05921
0.05445
0.04587
0.03628
114
139
124
147
144
159
181
199
219
227
238
256
271
274
308
342
346
380
414
439
470
528
572
572
626
619
676
710
784
899
72
87
78
95
93
101
112
124
132
136
141
150
158
172
175
189
190
204
215
224
232
247
256
257
263
262
268
269
266
241
(Table 60)
No. of Wires
in Conductor Mass Electrical Resistance
Stranding Constants Practical(final) Modulus of Elasticity
(hbar)
Coefficient of Linear
(Expansion/ )
7
19
37
7.091
19.34
37.74
0.1447
0.05357
0.02757
5,900
5,600
5,600
23.0 10-6
23.0 10-6
23.0 10-6
Standard Dia.
(mm)
Mass
(kg/km)
Standard Resistance
( /km,20 )
Min. Breaking Load for
Standard Dia. Wire
(N)
Cross Sectional Area of
Standard Dia. Wire
(mm2
)
1 2 3 4 5
2.06
3.10
3.25
3.40
3.78
4.22
4.39
4.65
3.333
7.548
8.296
9.079
11.22
13.99
15.14
16.98
9.009
20.40
22.42
24.54
30.33
37.81
40.91
45.90
8.480
3.745
3.407
3.113
2.519
2.021
1.867
1.664
600
1,250
1,370
1,490
1,800
2,240
2,410
2,700
Note : These values are given for information only. 1 hbar=10MN/m2
=10N/mm2
Note : The values given in columns 2 to 5 are given for information olny.
48 Overhead Electrical Aluminum Conductors TAIHAN

49. Aluminum Conductors, Steel ReinforcedACSR
ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Application
This standard covers aluminum stranded conductors steel reinforced
which could withstand high tensile load to be used mainly for overhead
transmission lines, overhead distribution lines.
Construction
The center wire or wires are of steel and the outer layer or layers of
aluminum.
Standards
Conforms to BS 215 : part 2/1970
Code
Word
Equiv.
Area
(HDCC)
(mm2
) Al St Al St Total Al St Total N kgf ( /km,20 ) Temperate Tropical
Stranding and
Wire Dia.
(mm)
Overall
Dia.
(mm)
Area
(mm2
)
Weight
(kg/km)
Nominal
Breaking Load
Rating
(amps)
Max. D.C.
Resistance
Nominal
Al
Area
(mm2
)
Mole
Squirrel
Gopher
Weasel
Fox
Ferret
Rabbit
Mink
Skunk
Beavor
Horse
Raccoon
Otter
Cat
Hare
Dog
Hyena
Leopard
Coyote
Cougar
Tiger
Wolf
Dingo
Lynx
Caracal
Jaguar
Panther
Lion
Bear
Batang
Goat
Sheep
Antelope
Bison
Deer
Zebra
Elk
Camel
Moose
-
-
25
30
-
40
50
-
-
-
70
-
-
-
-
100
-
-
-
-
-
150
150
175
175
200
200
-
250
-
300
-
-
-
-
400
-
-
-
6.5
12.9
16.1
19.4
22.6
25.8
32.3
38.7
38.7
45.2
45.2
48.4
51.6
58.1
64.5
64.5
64.5
80.7
80.7
80.7
80.7
96.8
97.9
113.0
113.7
130
129
145
161
194
194
226
226
226
258
258
290
290
323
6/1.50
6/2.11
6/2.36
6/2.59
6/2.79
6/3.00
6/3.35
6/3.66
12/2.59
6/3.99
12/2.79
6/4.10
6/4.22
6/4.50
6/4.72
6/4.72
7/4.39
6/5.28
26/2.54
18/3.05
30/2.36
30/2.59
18/3.35
30/2.79
18/3.61
18/3.86
30/3.00
30/3.18
30/3.35
18/4.78
30/3.71
30/3.99
54/2.97
54/3.00
30/4.27
54/3.18
30/4.50
54/3.35
54/3.53
1/1.50
1/2.11
1/2.36
1/2.59
1/2.79
1/3.00
1/3.35
1/3.66
7/2.59
1/3.99
7/2.79
1/4.10
1/4.22
1/4.50
1/4.72
7/1.57
7/1.93
7/1.75
7/1.91
1/3.05
7/2.36
7/2.59
1/3.35
7/2.79
1/3.61
1/3.86
7/3.00
7/3.18
7/3.35
7/1.68
7/3.71
7/3.99
7/2.97
7/3.00
7/4.27
7/3.18
7/4.50
7/3.35
7/3.53
4.50
6.33
7.08
7.77
8.37
9.00
10.05
10.98
12.95
11.97
13.95
12.30
12.66
13.50
14.16
14.15
14.57
15.81
15.89
15.25
16.52
18.13
16.75
19.53
18.05
19.30
21.00
22.26
23.45
24.16
25.97
27.93
26.73
27.00
29.89
28.62
31.50
30.15
31.77
10.62
20.94
26.24
31.61
36.66
42.41
52.88
63.18
63.48
74.82
73.37
79.20
83.88
95.40
105.0
105.0
105.8
131.3
132.1
130.3
131.1
158.0
158.7
183.4
184.3
210.6
212.0
238.5
264.0
323.0
324.3
374.1
373.1
381.8
429.3
428.9
477.0
475.2
528.7
1.77
3.49
4.37
5.27
6.11
7.07
8.81
10.53
37.03
12.47
42.80
13.20
13.98
15.90
17.50
13.50
20.44
18.80
20.09
7.24
30.59
36.88
8.80
42.77
10.24
11.69
49.49
55.65
61.60
15.52
75.67
87.29
48.37
49.49
100.20
55.59
111.30
61.60
68.53
12.39
24.43
30.62
36.88
42.77
49.48
61.70
73.71
100.50
87.29
116.20
92.40
97.86
111.30
122.50
118.5
126.2
148.1
152.2
137.5
161.7
194.9
167.5
226.2
194.5
222.3
261.5
294.2
325.6
338.52
400.0
461.4
421.5
431.3
529.5
484.5
588.3
536.8
597.2
29
58
72
87
101
117
145
173
175
205
203
217
230
262
288
288
290
360
365
362
362
437
437
507
507
580
586
659
730
888
896
1,034
1,032
1,056
1,186
1,186
1,318
1,314
1,462
14
27
34
41
48
55
69
82
290
97
335
103
109
124
137
106
160
132
157
267
240
280
69
335
81
91
388
436
483
121
593
684
379
388
785
435
872
483
537
43
85
106
128
149
172
214
255
465
302
538
320
339
386
425
394
450
492
522
419
602
726
506
842
588
671
974
1,095
1,213
1,009
1,489
1,718
1,411
1,444
1,971
1,621
2,190
1,797
1,999
4,100
7,900
9,610
11,450
13,200
15,200
18,350
21,800
53,100
25,700
61,200
27,200
28,700
32,700
36,000
32,700
40,900
40,700
46,400
29,800
58,000
69,200
35,700
79,800
41,000
46,550
92,250
100,600
111,100
70,900
135,700
155,900
118,200
120,900
178,500
131,900
198,200
145,700
161,100
418
806
980
1,168
1,346
1,550
1,871
2,223
5,415
2,621
6,241
2,774
2,927
3,335
3,671
3,335
4,171
4,150
4,732
3,039
5,914
7,056
3,640
8,137
4,181
4,747
9,407
10,258
11,329
7,240
13,838
15,897
12,053
12,328
18,202
13,450
20,211
14,857
16,428
2.702
1.370
1.093
0.9077
0.7827
0.6766
0.5426
0.4541
0.4565
0.3834
0.3936
0.3623
0.3421
0.3008
0.2733
0.2733
0.2712
0.2185
0.2187
0.2210
0.2204
0.1828
0.1815
0.1576
0.1563
0.13670
0.1363
0.1212
0.1095
0.0894
0.08910
0.07724
0.07747
0.07571
0.06731
0.06740
0.06058
0.06083
0.05468
67
109
126
134
147
161
185
174
246
193
268
231
240
248
273
278
287
316
311
314
323
355
349
386
383
415
421
448
481
510
542
592
588
595
639
635
679
677
763
55
69
77
84
93
98
112
103
139
110
148
131
137
145
151
153
155
167
164
168
164
162
179
178
205
197
191
195
198
165
200
197
208
208
186
202
165
192
176
(Table 61)
Galvanized steel
Aluminum conductor
49TAIHAN Overhead Electrical Aluminum Conductors

50. Aluminum Conductors, Steel ReinforcedACSR
Notes : These values are given for information purpose only.
1 hbar = 10 MN/m2
= 10 N/mm2
Aluminum Wires Used in the Construction of Standard Aluminum
Conductors, Steel-reinforced
No. of Wires in Conductor
(No.)
Al St Al
Mass Electrical
ResistanceSt
Practical (final)
Modulus of Elasticity
(hbar)
Coefficient
of Linear
(Expansion/ )
Stranding Constants
6
6
12
18
30
54
1
7
7
1
7
7
6.091
6.091
12.26
18.34
30.67
55.23
1.000
7.032
7.032
1.000
7.032
7.032
0.1692
0.1692
0.08514
0.05660
0.03408
0.01894
7,900
7,500
10,500
6,600
8,000
6,900
19.1 10-6
19.8 10-6
15.3 10-6
21.2 10-6
17.8 10-6
19.3 10-6
Note : The values in column 2 to 5 are given for information only.
BS 4565. “Galvanized steel wire for aluminum conductors, steel-reinforced.”
1 2 3 4 5
Standard
Dia.
(mm)
Cross Sectional Area of
Standard Dia. Wire
(mm2
)
Mass
(kg/km)
Standard
Resistance
( /km,20 )
Min. Breaking Load for
Standard Dia. Wire
(N)
2.36
2.59
2.79
3.00
3.18
3.35
3.61
3.86
4.72
4.374
5.269
6.114
7.069
7.942
8.814
10.24
11.40
17.50
11.82
14.24
16.53
19.11
21.47
23.82
27.67
31.63
47.30
6.461
5.365
4.623
3.999
3.559
3.207
2.761
2.415
1.615
770
906
1,030
1,190
1,310
1,450
1,660
1,870
2,780
Steel Wires Used in the Construction of Standard Aluminum Conductors,
Steel-reinforced
Note : The values in column 2 to 4 are given for information only.
1 2 3 4
Standard
Dia.
(mm)
Cross Sectional Area of
Standard Dia. Wire
(mm2
)
Mass
(kg/km)
Min. Load at 1% Elongation for
Standard Dia. Wire
(N)
1.57
2.36
2.59
2.79
3.00
3.18
3.35
3.61
3.86
1.936
4.374
5.269
6.414
7.069
7.942
8.814
10.24
11.70
15.10
34.12
41.09
47.69
55.13
61.95
68.75
79.84
91.28
2,280
4,990
6,010
6,570
8,060
8,740
9,700
11,260
12,870
50 Overhead Electrical Aluminum Conductors TAIHAN

51. Stranded All-aluminum ConductorsAAC
ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Application
This standard covers stranded hard-drawn circular aluminum
conductors to be used mainly for overhead distribution wires, overhead
feeder.
Construction
Stranded hard-drawn aluminum conductors
Standards
Conforms to AS 1531/1991
Notes : 1. The sectional area is the sum of the cross sectional areas of the relevant individual wires.
2. For the basis of calculation of columns 4, 5, 6 and 7, see (AS 1531) Appendix A.
Code
Word
Stranding &
Wire Dia.
(mm)
Approx
Overall Dia.
(mm)
Sectional
Area
(mm2
)
Calculated
Equivalent
Al Area
(mm2
)
Approx.
Mass
(kg/km)
Min. Calculated
Breaking Load
(kN)
Calculated D.C.
Resistance
( /km, 20 )
1 2 3 4 5 6 7
Leo
Leonids
Libra
Mars
Mercury
Moon
Neptune
Orion
Pluto
Saturn
Sirius
Taurus
Triton
Uranus
Ursula
Venus
7/2.50
7/2.75
7/3.00
7/3.75
7/4.50
7/4.75
19/3.25
19/3.50
19/3.75
37/3.00
37/3.25
19/4.75
37/3.75
61/3.25
61/3.50
61/3.75
7.50
8.25
9.00
11.3
13.5
14.3
16.3
17.5
18.8
21.0
22.8
23.8
26.3
29.3
31.5
33.8
34.36
41.58
49.48
77.28
111.3
124.0
157.6
182.8
209.8
261.6
307.0
336.7
408.5
506.1
586.9
673.4
33.9
41.1
48.9
76.3
110
122
154
180
206
256
301
331
400
495
574
659
94.3
113
135
211
304
339
433
503
576
721
845
924
1,120
1,400
1,620
1,860
5.71
6.72
7.98
11.8
16.9
18.9
24.7
28.7
31.9
42.2
48.2
51.3
62.2
75.2
87.3
97.2
0.833
0.689
0.579
0.370
0.258
0.232
0.183
0.157
0.137
0.110
0.094
0.0857
0.0706
0.0572
0.0493
0.0493
(Table 62)
51TAIHAN Overhead Electrical Aluminum Conductors

52. Aluminum Conductors, Galvanized Steel Reinforced
(AS 3607/1989)ACSR/GZ
Notes : 1. The sectional area is the sum of the cross sectional areas of the relevant individual wires.
2. For the basis of calculation of columns 5, 6, 7 and 8, see (AS 3607) Appendix A.
Code
Word
Al Galvanized St
Stranding and Wire Dia.
(mm)
Approx.
Overall Dia.
(mm)
Sectional
Area
(mm2
)
Calculated
Equiv. Al Area
(mm2
)
Approx.
Mass
(kg/km)
Min. Calculated
Breaking Load
(kN)
Calculated D.C.
Resistance
( /km, 20 )
1 2 3 4 5 6 7 8
Almond
Apricot
Apple
Banana
Cherry
Grape
Lemon
Lychee
Lime
Mango
Orange
Olive
Paw Paw
6/2.50
6/2.75
6/3.00
6/3.75
6/4.75
30/2.50
30/3.00
30/3.25
30/3.50
54/3.00
54/3.25
54/3.50
54/3.75
1/2.50
1/2.75
1/3.00
1/3.75
7/1.60
7/2.50
7/3.00
7/3.25
7/3.50
7/3.00
7/3.25
7/3.50
19/2.25
7.50
8.3
9.00
11.3
14.3
17.5
21.0
22.8
24.5
27.0
29.3
31.5
33.8
34.36
41.58
49.48
77.31
120.4
181.6
261.5
306.9
356.0
431.2
506.0
586.9
672.0
29.0
35.1
41.8
65.2
105
144
207
243
282
373
438
508
583
119
144
171
268
402
677
973
1,140
1,320
1,440
1,690
1,960
2,240
10.5
12.6
14.9
22.7
33.4
63.5
90.4
105
122
119
137
159
178
0.975
0.805
0.677
0.433
0.271
0.196
0.136
0.116
0.100
0.0758
0.0646
0.0557
0.0485
(Table 63)
Standard High Strength Conductors
Quince
Raisin
Sultana
Walnut
3/1.75
3/2.50
4/3.00
4/3.75
4/1.75
4/2.50
3/3.00
3/3.75
5.3
7.50
9.00
11.3
16.84
34.36
49.48
77.31
8.74
17.8
31.5
49.2
95
195
243
380
12.7
24.4
28.3
43.9
3.25
1.59
0.897
0.573
Aluminum Conductors, Aluminized Steel Reinforced
(AS 3607/1989)ACSR/AZ
Notes : 1. The sectional area is the sum of the cross sectional areas of the relevant individual wires.
2. For the basis of calculation of columns 5, 6, 7 and 8, see (AS 3607) Appendix A.
Code
Word
Al Galvanized St
Stranding and Wire Dia.
(mm)
Approx.
Overall Dia.
(mm)
Sectional
Area
(mm2
)
Calculated
Equiv. Al Area
(mm2
)
Approx.
Mass
(kg/km)
Min. Calculated
Breaking Load
(kN)
Calculated D.C.
Resistance
( /km, 20 )
1 2 3 4 5 6 7 8
Barley
Bean
Cabbage
Carrot
6/2.50
6/3.00
6/3.75
6/4.75
1/2.50
1/3.00
1/3.75
7/1.60
7.50
9.00
11.3
14.3
34.36
49.48
77.31
120.4
29.0
41.8
65.2
105
118
170
265
399
10.2
14.5
21.4
32.0
0.975
0.677
0.433
0.271
(Table 64)
52 Overhead Electrical Aluminum Conductors TAIHAN

53. Aluminum Conductors, Steel ReinforcedACSR
ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Application
This standard covers aluminum stranded conductors steel reinforced
which could withstand high tensile load to be used mainly for overhead
transmission lines, overhead distribution lines.
Construction
The center wire or wires are of galvanized steel and the outer layer or
layers of aluminum.
Standards
Conforms to CSA C49.1
Conductor type means the ratio of steel to aluminum areas in percent.
Code
Word
Al
Al Al St TotalSt
St
Core
Complete
Conductor
AWG
or
CMILS
St Complete
Conductor
sq in
sq in sq in No. Dia. No. Dia. (pound)
( /1000ft,
20 )
Nominal Area Stranding No.
and Nominal Dia. of Wires
(in)
Nominal Dia.
(in)
Nominal Weight
(pound/1000ft)
Rated
Tensile
Strength
D.C.
ResistanceCon-
ductor
Type
Wren
Turkey
Swan
Sparrow
Robin
Raven
Quail
Pigeon
Penguin
Owl
Waxwing
Partridge
Phoebe
Ostrich
Piper
Merlin
Linnet
Oriole
Chickadee
Ibis
Lark
Pelican
Toucan
Hawk
Hen
Heron
Sapsucker
Dove
Eagle
-
Duck
Goldfinch
Grosbeak
Egret
17
17
17
17
17
17
17
17
17
13
6
16
6
16
23
6
16
23
6
16
23
6
10
16
23
23
10
16
23
10
13
10
16
23
8
6
4
2
1
1/0
3/0
3/0
4/0
266,800
266,800
266,800
300,000
300,000
300,000
336,400
336,400
336,400
397,500
397,500
397,500
477,000
477,000
477,000
477,000
500,000
556,500
556,500
556,500
605,000
605,000
636,000
636,000
636,000
0.0130
0.0206
0.0328
0.0521
0.0657
0.0829
0.1045
0.1318
0.1662
0.2095
0.2095
0.2095
0.2356
0.2356
0.2356
0.2642
0.2642
0.2642
0.3122
0.3122
0.3122
0.3746
0.3746
0.3746
0.3746
0.3927
0.4371
0.4371
0.4371
0.4752
0.4752
0.4995
0.4995
0.4995
0.0022
0.0034
0.0055
0.0087
0.0110
0.0138
0.0174
0.0220
0.0277
0.0272
0.0115
0.0341
0.0131
0.0383
0.0550
0.0147
0.0431
0.0617
0.0173
0.0508
0.0728
0.0208
0.0368
0.0611
0.0874
0.0916
0.0429
0.0712
0.1020
0.0466
0.0617
0.0490
0.0813
0.1140
0.0152
0.0240
0.0383
0.0608
0.0767
0.0967
0.1219
0.1538
0.1939
0.2367
0.2210
02436
0.2487
0.2739
0.2906
0.2789
03073
0.3259
0.3295
0.3630
0.3850
0.3954
0.4114
0.4357
0.4620
0.4843
0.4800
0.5083
0.5391
0.5218
0.5369
0.5485
0.5808
0.6133
0.0525
0.0661
0.0834
0.1052
0.1181
0.1327
0.1489
0.1672
0.1878
0.2109
0.1217
0.1013
0.1291
0.1074
0.1000
0.1367
0.1137
0.1059
0.1486
0.1236
0.1151
0.1628
0.1472
0.1354
0.1261
0.1291
0.1590
0.1463
0.1362
0.1658
0.1058
0.1700
0.1564
0.1456
0.0525
0.0661
0.0834
0.1052
0.1181
0.1327
0.1489
0.1672
0.1878
0.0703
0.1217
0.0788
0.1291
0.0835
0.1000
0.1367
0.0884
0.1059
0.1486
0.0961
0.1151
0.1628
0.0818
0.1053
0.1261
0.1291
0.0883
0.1138
0.1362
0.0921
0.1058
0.0944
0.1216
0.0874
0.0525
0.0661
0.0834
0.1052
0.1181
0.1327
0.1489
0.1672
0.1878
0.2109
0.1217
0.2364
0.1291
0.2505
0.3000
0.1367
0.2652
0.3177
0.1486
0.2883
0.3453
0.1628
0.2454
0.3159
0.3783
0.3873
0.2649
0.3414
0.4086
0.2763
0.3174
0.2832
0.3648
0.4370
0.158
0.198
0.250
0.316
0.354
0.398
0.447
0.502
0.563
0.633
0.609
0.642
0.646
0.680
0.700
0.684
0.720
0.741
0.743
0.783
0.806
0.814
0.834
0.858
0.883
0.904
0.901
0.927
0.953
0.940
0.952
0.963
0.990
1.019
745
1,170
1,830
2,790
3,480
4,290
5,350
6,570
8,420
9,540
7,100
11,300
7,980
12,600
15,400
8,950
14,000
17,000
10,400
16,200
20,000
12,300
15,400
19,400
23,400
24,500
17,800
22,500
27,200
19,100
22,500
20,100
25,000
31,600
1.0452
0.6577
0.4134
0.2601
0.2062
0.1634
0.1297
0.1028
0.0816
0.0647
0.0649
0.0651
0.0577
0.0579
0.0579
0.0515
0.0516
0.0517
0.0436
0.0437
0.0437
0.0363
0.0364
0.0364
0.0364
0.0348
0.0312
0.0312
0.0312
0.0287
0.0287
0.0273
0.0273
0.0273
15.4
24.5
39.0
62.0
78.1
98.6
124.3
156.7
197.6
249
250
251
281
282
282
315
316
316
373
373
374
447
448
448
448
470
522
523
523
568
569
597
597
598
7.3
11.6
18.4
29.3
37.0
46.6
58.8
74.1
93.4
92
39
116
44
130
186
50
146
209
58
172
247
70
125
207
296
310
145
241
345
158
209
166
275
387
22.7
36.1
57.4
91.3
115.1
145.2
183.1
230.8
291.0
341
289
367
325
412
468
365
462
525
431
545
621
517
573
655
744
780
667
764
868
726
778
763
872
985
6
6
6
6
6
6
6
6
6
6
18
26
18
26
30
18
26
30
18
26
30
18
22
26
30
30
22
26
30
22
54
22
26
30
1
1
1
1
1
1
1
1
1
7
1
7
1
7
7
1
7
7
1
7
7
1
7
7
7
7
7
7
7
7
7
7
7
19
(Table 65)
Galvanized steel
Aluminum conductor
53TAIHAN Overhead Electrical Aluminum Conductors

54. Aluminum Conductors, Steel ReinforcedACSR
Conductor type means the ratio of steel to aluminum areas in percent.
Code
Word
Al
Al Al St TotalSt
St
Core
Complete
Conductor
AWG
or
CMILS
St Complete
Conductor
sq in
sq in sq in No. Dia. No. Dia. (pound)
( /1000ft,
20 )
Nominal Area Stranding No.
and Nominal Dia. of Wires
(in)
Nominal Dia.
(in)
Nominal Weight
(pound/1000ft)
Rated
Tensile
Strength
D.C.
Resistance
Con-
ductor
Type
Goose
Gull
-
Starling
Redwing
-
Crow
Drake
Mallard
Macaw
Condor
-
Crane
-
Canary
Phoenix
Cardinal
Snowbird
Curlew
Beaumont
Finch
-
Grackle
Scissortail
Pheasant
-
Martin
-
Plover
-
Parrot
-
Falcon
-
13
5
13
16
23
13
13
16
23
5
13
5
13
5
13
5
13
5
13
5
13
5
13
5
13
5
13
5
13
5
13
9
13
4
636,000
666,600
666,600
715,500
715,500
715,500
715,500
795,000
795,000
795,000
795,000
874,500
874,500
900,000
900,000
954,000
954,000
1,033,500
1,033,500
1,113,000
1,113,000
1,192,500
1,192,500
1,272,000
1,272,000
1,351,500
1,351,500
1,431,000
1,431,000
1,510,500
1,510,500
1,590,000
1,590,000
1,590,000
0.4995
0.5235
0.5235
0.5620
0.5620
0.5620
0.5620
0.6244
0.6244
0.6244
0.6244
0.6868
0.6868
0.7069
0.7069
0.7493
0.7493
0.8117
0.8117
0.8741
0.8741
0.9366
0.9366
0.9990
0.9990
1.0615
1.0615
1.1239
1.1239
1.1863
1.1863
1.2488
1.2488
1.2488
0.0647
0.0269
0.0679
0.0915
0.1280
0.0289
0.0728
0.1017
0.1424
0.0321
0.0809
0.0354
0.0891
0.0363
0.0916
0.0385
0.0971
0.0418
0.1052
0.0449
0.1109
0.0482
0.1187
0.0514
0.1266
0.0546
0.1344
0.0579
0.1424
0.0610
0.1501
0.1102
0.1583
0.0540
0.5642
0.5504
0.5914
0.6535
0.6900
0.5909
0.6348
0.7261
0.7668
0.6565
0.7053
0.7222
0.7759
0.7432
0.7985
0.7878
0.8464
0.8535
0.9169
0.9190
0.9850
0.9484
1.0553
1.0504
1.1256
1.1161
1.1959
1.1818
1.2663
1.2473
1.3364
1.3590
1.4071
1.3028
0.1085
0.1260
0.1111
0.1659
0.1544
0.1305
0.1151
0.1749
0.1628
0.1376
0.1213
0.1443
0.1273
0.1464
0.1291
0.1507
0.1329
0.1569
0.1383
0.1628
0.1436
0.1685
0.1486
0.1740
0.1535
0.1794
0.1582
0.1846
0.1628
0.1896
0.1672
0.1820
0.1716
0.1486
0.1085
0.0700
0.1111
0.1290
0.0926
0.0725
0.1151
0.1360
0.0977
0.0764
0.1213
0.0802
0.1273
0.0813
0.1291
0.0837
0.1329
0.0872
0.1383
0.0904
0.0862
0.0936
0.0892
0.0967
0.0921
0.0997
0.0949
0.1026
0.0977
0.1053
0.1003
0.1416
0.1030
0.0991
0.3255
0.2100
0.3333
0.3870
0.4630
0.2175
0.3453
0.4080
0.4885
0.2292
0.3639
0.2406
0.3819
0.2439
0.3873
0.2511
0.3987
0.2616
0.4149
0.2712
0.4310
0.2808
0.4460
0.2901
04605
0.2991
0.4745
0.3078
0.4885
0.3159
0.5015
0.4248
0.5150
0.2973
0.977
0.966
1.000
1.051
1.081
1.001
1.036
1.108
1.140
1.055
1.092
1.106
1.146
1.122
1.162
1.155
1.196
1.203
1.245
1.248
1.293
1.292
1.338
1.334
1.382
1.376
1.424
1.415
1.465
1.454
1.505
1.517
1.545
1.486
23,700
17,700
24,500
28,100
34,600
19,000
26,300
31,300
38,500
21,100
28,500
22,800
31,400
23,500
32,300
24,500
34,300
26,600
37,100
28,400
40,300
30,400
43,100
32,500
44,900
34,500
47,600
36,500
50,500
38,500
53,200
47,600
56,100
39,500
0.0273
0.0261
0.0261
0.0243
0.0243
0.0243
0.0243
0.0218
0.0219
0.0219
0.0219
0.0199
0.0199
0.0193
0.0193
0.0182
0.0182
0.0168
0.0168
0.0156
0.0156
0.0146
0.0146
0.0137
0.0137
0.0129
0.0129
0.0121
0.0122
0.0115
0.0115
0.0109
0.0109
0.0109
599
627
627
672
673
673
673
747
747
747
748
822
823
846
847
897
898
972
973
1,046
1,048
1,121
1,122
1,196
1,197
1,271
1,272
1,345
1,347
1,420
1,422
1,495
1,496
1,496
219
91
230
310
434
98
247
344
484
109
274
120
302
123
310
130
329
141
356
152
376
163
403
174
430
185
456
196
484
206
511
372
537
183
818
718
857
982
1,107
771
920
1,091
1,231
856
1,022
942
1,125
969
1,157
1,027
1,227
1,113
1,328
1,198
1,424
1,284
1,525
1,370
1,627
1,456
1,728
1,541
1,831
1,626
1,933
1,867
2,033
1,679
54
42
54
26
30
42
42
26
30
42
54
42
54
42
54
42
54
42
54
42
54
42
54
42
54
42
54
42
54
42
54
48
54
72
7
7
7
7
19
7
7
7
19
7
7
7
7
7
7
7
7
7
7
7
19
7
19
7
19
7
19
7
19
7
19
7
19
7
(Table 65)
54 Overhead Electrical Aluminum Conductors TAIHAN

55. Compact Aluminum Conductors Steel Reinforced (CSA C49.2)
ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Conductor type means the ratio of steel to aluminum areas in percent.
Code
Word
Con-
ductor
Type
AWG
or
CMILS
sq in
St
(sq in)
Complete
Conductor
(sq in)
Al
Nominal Area Nominal Dia.
(in)
Nominal Weight
(pound/1000ft)
Rated
Tensile
Strength
(pound)
D.C.
Resistance
( /1000ft,
20 )
No. of
Al
Wires
St Wire Al St TotalConductor
Cod
Minnow
Sardine
Bass
Mullet
Herring
Pike
Pollock
Flounder
Carp
Haddock
Pickerel
Shad
Lamprey
Sole
Sculpin
Hake
Cusk
Scup
-
-
17
34
53
17
34
53
17
34
53
17
34
53
17
34
17
34
17
17
17
6
6
8
8
8
6
6
6
4
4
4
2
2
2
1
1
1/0
1/0
2/0
3/0
4/0
266,800
336,400
0.0130
0.0130
0.0130
0.0206
0.0206
0.0206
0.0328
0.0328
0.0328
0.0521
0.0521
0.0521
0.0657
0.0657
0.0829
0.0829
0.1045
0.1318
0.1662
0.2095
0.2642
0.0022
0.0043
0.0069
0.0034
0.0069
0.0110
0.0055
0.0110
0.0174
0.0087
0.0174
0.0277
0.0110
0.0220
0.0138
0.0277
0.0174
0.0220
0.0277
0.0115
0.0147
0.0152
0.0173
0.0199
0.0240
0.0275
0.0316
0.0383
0.0438
0.0502
0.0608
0.0695
0.0798
0.0767
0.0877
0.0967
0.1106
0.1219
0.1538
0.1939
0.2210
0.2789
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
18
18
0.0525
0.0743
0.0937
0.0661
0.0937
0.1182
0.0834
0.1182
0.1490
0.1052
0.1490
0.1878
0.1182
0.1672
0.1327
0.1878
0.1490
0.1672
0.1878
0.1217
0.1367
0.145
0.154
0.165
0.182
0.193
0.208
0.229
0.243
0.264
0.290
0.308
0.331
0.326
0.346
0.365
0.388
0.410
0.461
0.517
0.559
0.628
745
1,110
1,510
1,170
1,720
2,400
1,830
2,710
3,690
2,790
4,150
5,790
3,480
5,190
4,290
6,510
5,350
6,670
8,420
7,100
8,950
1.0452
1.0452
1.0452
0.6577
0.6577
0.6577
0.4134
0.4134
0.4134
0.2601
0.2601
0.2601
0.2062
0.2062
0.1634
0.1634
0.1297
0.1028
0.0816
0.0647
0.0515
15.4
15.4
15.4
24.5
24.5
24.5
39.0
39.0
39.0
62.0
62.0
62.0
78.1
78.1
98.6
98.6
124.3
156.7
197.6
250
315
7.3
14.6
23.3
11.6
23.3
37.0
18.4
37.0
58.8
29.3
58.8
93.4
37.0
74.1
46.6
93.4
58.8
74.1
93.4
39
50
22.7
30.0
38.7
36.1
47.8
61.5
57.4
76.0
97.8
91.3
120.8
155.4
115.1
152.2
145.2
192.0
183.1
230.8
291.0
289
365
(Table 66)
55TAIHAN Overhead Electrical Aluminum Conductors

56. Stranded All-aluminum ConductorAAC
Application
This standard covers stranded hard-drawn circular aluminum
conductors to be used mainly for overhead distribution wire, overhead
feeder.
Construction
Stranded hard-drawn aluminum conductors
Standards
Conforms to DIN 48201
Area
(mm2
)
Equivalent
Area (HDCC)
Stranding
and
Wires Dia.
Overall
Dia.
Weight Nominal
Breaking
Load
Max. D.C.
Resistance
Rating
(amps)
Nominal Actual (mm2
) (mm) (mm) (kg/km) (kp) ( /km, 20 ) Temperate Tropical
16
25
35
50
50
70
95
120
150
185
240
300
400
500
625
800
1,000
15.89
24.25
34.36
49.48
48.36
65.82
93.27
117.00
147.10
181.60
242.5
299.4
400.1
499.8
626.2
802.4
999.7
10
15
21
31
30
41
60
70
90
110
150
155
245
305
385
490
615
7/1.7
7/2.1
7/2.5
7/3.0
19/1.8
19/2.10
19/2.50
19/2.80
37/2.25
37/2.50
61/2.25
61/2.50
61/2.89
61/3.23
91/2.96
91/3.35
91/3.74
5.1
6.3
7.5
9.0
9.0
10.5
12.5
14.0
15.7
17.5
20.2
22.5
26.0
29.1
32.8
36.8
41.1
44
67
94
135
133
181
256
322
408
501
670
827
1,105
1,381
1,733
2,219
2,766
290
425
585
810
860
1,150
1,595
1,910
2,570
3,105
4,015
4,850
6,190
7,600
9,690
12,055
14,845
1.8017
1.1806
0.8332
0.5786
0.5948
0.4370
0.3084
0.2459
0.1960
0.1588
0.1192
0.09651
0.07222
0.05782
0.04625
0.03611
0.02897
87
112
138
172
172
206
254
291
333
379
448
509
602
689
785
904
1,027
59
74
89
107
107
124
146
160
176
191
207
217
222
211
176
52
-
(Table 67)
56 Overhead Electrical Aluminum Conductors TAIHAN

57. Aluminum Conductors, Steel ReinforcedACSR
ASTMANSIIECBSASCSADINKSJISKEPCOTEC
Application
This standard covers aluminum stranded conductors steel reinforced
which could withstand high tensile load to be used mainly for overhead
transmission lines, overhead distribution lines.
Construction
The center wire or wires are of steel and the outer layer or layers of
aluminum.
Standards
Conforms to DIN 48204
Area
(mm2
)
Equiv.
Area
(HDCC)
Stranding and
Wires Dia.
(mm)
Overall
Dia.
Weight
(kg/km)
Nominal
Breaking
Load
Max. D.C.
Resistance
Rating
(amps)Nominal
Al St Total
St (mm2
)Al Al Al St Total Temperate Tropical(kp)
( /km,
20 )St (mm)
16
25
35
44
50
50
70
95
95
105
120
120
125
150
170
185
210
210
230
240
265
300
305
340
380
385
435
450
490
550
560
680
2.5
4.0
6.0
32.0
8.0
30
12
15
55
75
20
70
30
25
40
30
35
50
30
40
35
50
40
30
50
35
55
40
65
70
50
85
15.3
23.8
34.3
44.0
48.3
51.2
69.9
94.4
96.5
105.7
121.6
122.0
127.9
148.9
171.8
183.8
209.1
212.1
230.9
243.0
263.7
304.3
304.6
339.3
382.0
386.0
434.3
448.7
490.3
550.0
561.7
678.8
2.6
4.0
5.7
31.7
8.0
29.8
11.4
15.3
56.3
75.5
19.8
71.3
29.8
24.2
40.1
29.8
34.1
49.5
29.8
39.5
34.1
49.5
39.5
29.8
49.5
34.1
56.3
39.5
63.6
71.3
49.5
86.0
17.9
27.8
40.0
75.7
56.3
81.0
81.3
109.7
152.8
181.5
141.4
193.3
157.7
173.1
211.9
213.6
243.2
261.6
260.7
282.5
297.8
353.7
344.1
369.1
431.5
420.1
490.6
488.2
553.9
621.3
611.2
764.8
9.6
17.5
21.6
27.7
30.4
32.2
44.0
59.4
60.8
66.5
76.5
76.7
80.4
93.6
108.0
116
132
133
145
153
166
191
192
213
240
243
273
282
308
346
353
427
6/1.80
6/2.25
6/2.70
14/2.00
6/3.20
12/2.33
26/1.85
26/2.15
12/3.20
14/3.10
26/2.44
12/3.60
30/2.33
26/2.70
30/2.70
26/3.00
26/3.20
30/3.00
24/3.50
26/3.45
24/3.74
26/3.86
54/2.68
48/3.00
54/3.00
48/3.20
54/3.20
48/3.45
54/3.40
54/3.60
48/3.86
54/4.00
1/1.80
1/2.25
1/2.70
7/2.40
1/3.20
7/2.33
7/1.44
7/1.67
7/3.20
19/2.25
7/1.90
7/3.60
7/2.33
7/2.10
7/2.70
7/2.33
7/2.49
7/3.00
7/2.33
7/2.68
7/2.49
7/3.00
7/2.68
7/2.33
7/3.00
7/2.49
7/3.20
7/2.68
7/3.40
7/3.60
7/3.00
19/2.40
5.4
6.8
8.1
11.2
9.6
11.7
11.7
13.6
16.0
17.5
15.5
18.0
16.1
17.1
18.9
19.0
20.3
21.0
21.0
21.9
22.4
24.5
24.1
25.0
27.0
26.7
28.8
28.7
30.6
32.4
32.2
36.0
42
65
94
122
132
141
193
260
266
292
336
337
353
411
475
507
577
587
638
671
728
840
843
938
1,056
1,067
1,203
1,241
1,356
1,520
1,553
1,868
20
32
46
250
64
237
91
123
446
599
158
564
238
194
319
239
273
394
239
316
274
396
317
242
397
277
450
320
510
572
401
702
62
97
140
372
196
378
284
383
712
891
494
901
591
605
794
746
850
981
877
987
1,002
1,236
1,160
1,180
1,458
1,344
1,653
1,561
1,866
2,092
1,954
2,570
595
920
1,265
4,500
1,710
4,380
2,680
3,575
7,935
10,845
4,565
10,000
5,760
5,525
7,675
6,620
7,490
9,390
7,310
8,640
8,305
10,700
9,940
9,290
12,310
10,480
13,645
12,075
15,310
17,060
14,895
21,040
85
114
140
170
172
187
217
260
271
289
304
359
309
341
373
386
418
423
442
457
477
521
520
553
594
597
641
650
687
734
742
830
58
74
89
100
105
109
127
145
142
145
161
154
161
173
179
185
193
190
199
199
204
205
208
213
207
211
200
205
189
168
173
80
1.8793
1.2028
0.8353
0.6573
0.5946
0.5644
0.4130
0.3058
0.2992
0.2736
0.2374
02364
0.2259
0.1939
0.1682
0.1571
0.1380
0.1363
0.1249
0.1188
0.1094
0.0949
0.0949
0.0851
0.0757
0.0748
0.0666
0.0644
0.0590
0.0526
0.05140
0.0426
(Table 68)
Galvanized steel
Aluminum conductor
57TAIHAN Overhead Electrical Aluminum Conductors

58. Reel
Designation
(D) (d) (W1) (W2) (h) (t) (in) (No.) (ft3
) (lb)
Flange
Dia.
Drum
Dia.
Overall
Width
Inside
Traverse
Arbor
Hole Dia.
Thickness of
Circumference
Battens
No.
of Bolt
Measurement Approx.
Weight
Dia.
of Bolt
3-1
3-2
3-3
3-4
3-5
4-1
4-2
4-3
4-4
4-5
4-6
4-7
5-1
5-2
5-3
5-4
5-5
5-6
6-1
6-2
6-3
6-4
6-5
6-6
7-1
7-2
7-3
7-4
7-5
8-1
8-2
8-3
8-4
8-5
8-6
9-1
9-2
9-3
9-4
9-5
9-6
9-7
9-8
20.5
21.7
22.8
24.0
25.2
24.0
25.2
26.4
27.6
28.7
29.9
31.1
26.4
27.6
28.7
29.9
31.1
32.3
32.3
33.5
34.6
35.8
37.0
38.2
35.8
37.0
38.2
39.4
41.3
37.0
38.2
39.4
41.3
43.3
45.3
43.3
45.3
47.2
45.3
47.2
49.2
51.2
53.2
11.8
11.8
11.8
11.8
11.8
13.8
13.8
13.8
13.8
13.8
13.8
13.8
15.7
15.7
15.7
15.7
15.7
15.7
17.7
17.7
17.7
17.7
17.7
17.7
19.7
19.7
19.7
19.7
19.7
23.6
23.6
23.6
23.6
23.6
23.6
23.6
23.6
23.6
27.6
27.6
27.6
27.6
27.6
15.7
15.7
15.7
15.7
15.7
15.7
15.7
15.7
15.7
15.7
15.7
15.7
19.7
19.7
19.7
19.7
19.7
19.7
19.7
19.7
19.7
19.7
19.7
19.7
23.6
23.6
23.6
23.6
23.6
23.6
23.6
23.6
23.6
23.6
23.6
29.5
29.5
29.5
29.5
29.5
29.5
29.5
29.5
12.9
12.9
12.9
12.9
12.9
12.9
12.9
12.9
12.9
12.9
12.9
12.9
15.9
15.9
15.7
15.7
15.7
15.7
15.7
15.7
15.7
15.7
15.7
15.7
19.7
19.7
19.7
19.7
19.7
19.7
19.7
19.7
19.7
19.7
19.7
24.8
24.8
24.8
24.8
24.8
24.8
24.8
24.8
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.2
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5.1
5.6
6.2
6.8
7.4
6.8
7.4
8.1
8.7
9.4
10.3
10.9
10.0
10.8
11.7
12.6
13.5
14.5
14.5
15.5
16.6
17.6
18.7
19.9
21.4
22.7
24.2
25.5
28.0
22.7
24.2
25.5
28.0
30.5
33.1
37.7
41.1
44.4
41.1
44.4
48.3
51.7
55.6
64.0
66.0
70.5
75.0
79.4
81.6
83.8
88.2
90.4
94.8
101.4
105.8
119.0
125.7
132.3
136.7
143.3
149.9
152.1
160.9
167.5
176.4
183.0
191.8
211.6
218.3
227.1
235.9
251.3
222.7
231.5
240.3
253.5
271.2
286.6
339.5
361.6
381.4
374.8
394.6
416.7
436.5
467.4
(Approx. in inch)
Standard Dimensions of Reel for Aluminum Conductor
Packing and Marking
The packing of the conductor is an intergral part of the manufacturing process, and the kind of package must be predetermined before
production can begin.
Unless otherwise specified or agreed with in case of order, ACSR shall be shipped on Taihan standard wooden reels having dimensions and
weights as given in the table shown below.
Taihan standard wooden reels shall have enough condition to stand against the ordinary handling in transportation and shipping and be found
ready and handy enough at the time of installation in site. Especially, in case that users require the metal reel, we can serve our standard metal
reels which have the same capacity as that of the wooden reel or special designed metal reels.
The reels will be stenciled legibly with following information; serial number, size and kind of conductor, length of conductor, and any other
indentification marks specified on the order by the purchaser.
58 Overhead Electrical Aluminum Conductors TAIHAN

59. Reel
Designation
(D) (d) (W1) (W2) (h) (t) (in) (No.) (ft3
) (lb)
Flange
Dia.
Drum
Dia.
Overall
Width
Inside
Traverse
Arbor
Hole Dia.
Thickness of
Circumference
Battens
No.
of Bolt
Measurement Approx.
Weight
Dia.
of Bolt
10-1
10-2
10-3
10-4
10-5
10-6
11-1
11-2
11-3
11-4
11-5
12-1
12-2
12-3
12-4
12-5
13-1
13-2
13-3
13-4
13-5
13-6
13-7
14-1
14-2
14-3
14-4
14-5
14-6
14-7
15-1
15-2
15-3
15-4
16-1
16-2
16-3
16-4
17-1
17-2
17-3
17-4
17-5
17-6
18-1
18-2
18-3
18-4
49.2
51.2
53.2
55.1
57.1
59.1
55.1
57.1
59.1
61.0
63.1
55.1
57.1
59.1
61.0
63.0
59.1
61.0
63.0
65.0
66.9
68.9
70.9
66.9
68.9
70.9
72.8
74.8
76.8
78.7
74.8
76.8
78.7
82.7
78.3
82.7
86.6
90.6
82.7
86.6
90.6
94.5
98.4
102.4
90.6
94.5
98.4
102.4
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
31.5
35.4
35.4
35.4
35.4
35.4
39.4
39.4
39.4
39.4
39.4
39.4
39.4
47.2
47.2
47.2
47.2
47.2
47.2
47.2
55.1
55.1
55.1
551
55.1
55.1
55.1
55.1
62.8
62.8
62.9
62.9
62.9
62.9
70.9
70.9
70.9
70.9
29.5
29.5
29.5
29.5
29.5
29.5
35.4
35.4
35.4
35.4
35.4
35.4
35.4
35.4
35.4
35.4
35.4
35.4
35.4
35.4
35.4
35.4
35.4
41.3
41.3
41.3
41.3
41.3
41.3
41.3
41.3
41.3
41.3
41.3
47.2
47.2
47.2
47.2
47.2
47.2
47.2
47.2
47.2
47.2
47.2
47.2
47.2
47.2
24.8
24.8
24.8
24.8
24.8
24.8
29.5
29.5
29.5
29.5
29.5
29.5
29.5
29.5
29.5
29.5
29.5
29.5
29.5
29.5
29.5
29.5
29.5
34.3
34.3
34.3
34.3
34.3
34.3
34.3
34.3
34.3
34.3
34.3
40.2
40.2
40.2
40.2
40.2
40.2
40.2
40.2
40.2
40.2
40.2
40.2
40.2
40.2
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
4.3
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.4
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
1.8
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
0.7
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
8
8
8
8
48.2
51.8
55.6
59.6
63.6
68.1
71.1
75.8
81.0
86.1
94.6
71.1
75.8
81.0
86.1
92.0
83.1
88.4
93.8
99.5
105
111
117
123
130
137
144
152
160
168
152
160
168
184
191
209
228
250
209
229
249
271
293
316
249
271
293
316
445.3
465.2
487.2
509.3
533.5
557.8
615.5
650.4
681.2
709.9
743.0
643.7
672.4
701.1
731.9
765.0
784.8
820.1
851.0
888.5
921.5
956.8
994.3
1,170.6
1,210.3
1,258.8
1,322.8
1,342.6
1,391.1
1,435.2
1,404.3
1,459.4
1,503.5
1,627.0
1,607.2
1,706.4
1,805.6
1,913.6
1,882.7
1,935.6
1,995.2
2,105.4
2,220.0
2,341.3
2,079.0
2,191.4
2,306.0
2,427.3
(Approx. in inch)Standard Dimensions of Reel for Aluminum Conductor
Dimensions of Wooden Reels
;;;;;;;;;;;;;;;
;;;;;;;;;;;;
yyyyyyyyyyyy
;;;;;
;;;
yyy;;;
yyy;;;Barrel lagging
W1W1
W2W2
tt
D
d
h
Center support
Barrel Bolts & Washer
Reinforcement
Circumference Battens
59TAIHAN Overhead Electrical Aluminum Conductors

60. Item
Aluminum Copper
Hard-drawn Al-alloy Hard-drawn
Annealed
Standard
Melting Point,
Electrical Resistivity at 20 , in
cm
Conductivity at 20 , % IACS
Temperature Coefficient of Resistanace at 20 , per
Density at 20 , g/cub, cm
lb/cub, in
Coefficient of Linear Expansion per
Weight Ratio, Same Volume
Resistance Ratio, Same Size
Resistance Ratio, Same Length and Same Weight
Tensile Strength Ratio
For Same Length and Resistance, Cross Sectional Area
Diameter
Weight
Breaking Strength
658
1.11277
2.8264
61
0.0040
2.70
0.09765
23 10-6
30.371
163.93
159.01
48.29
Approx. 40
159.01
126.12
48.295
Approx. 60
Approx. 650
1.30536
3.3156
52
0.0036
2.70
0.09765
23 10-6
30.371
192.30
186.54
56.65
Approx. 73
185.54
136.58
56.653
Approx. 135
1.083
0.69978
1.7774
97
0.00381
8.89
0.321
17 10-6
100
103.09
100
100
100
100
100
100
100
1.083
0.67879
1.7241
100
0.00393
8.89
0.321
17 10-6
100
100
Comparison of Aluminum and Copper
Conversion Factors
1in= 25.4mm, 1cmil = 5.067 10-4
mm2
, 1mil = 2.54 10-2
mm, 1lb/1000ft = 1.488kg/km,
1ft = 3.048 10-1
m, 1lb =4.536 10-1
kg, 1in3
= 1.639 10-5
m3
The metric unit of force in SI(System International) units is the newton. (N), which is defined as that force which, when applied to a body having
a mass of 1kg, gives it an acceleration of 1m/s2
.
The derived SI unit for pressure or stress is the newton per square meter(N/m2
), which has been named the pascal(Pa) by the General
Conference of Weights and Measures. Since 1ksi=6894757Pa the metric equivalents are expressed as megapascal(MPa), which is the same as
Mn/m2
and N/mm2
.
1ksi = 103
psi 1kgf/mm2
= 1.42ksi
1psi = 6.9KPa 1ksi = 0.704kgf/mm2
1ksi = 6.9MPa kgf = 9.80665 newtons(N)
60 Overhead Electrical Aluminum Conductors TAIHAN

61. Code Word Table No. Page No.
A
Acorn 38
Akron 34
Alliance 34
Almond 38, 41, 63
Alton 34
Ames 34
Amherst 34
Anaheim 34
Anemone 28
Anona 37, 40
Ant 60
Antelope 61
Aphis 60
Appaloosa 53
Appaloosa/XLPE 55
Apple 37, 39, 63
Apple/XLPE 42
Apricot 37, 40, 63
Apricot/XLPE 43
Arbutus 28
Ash 37
Aspen 38
Aster 28
Azusa 34
B
Banana 63
Barley 64
Bass 66
Basswood 37
Batang 61
Bean 64
Bear 61
Beaumont 65
Beavor 61
Bee 60
Beech 38, 41
Beetle 60
Bison 61
Bittern 29
Bitterroot 28
Bluebell 28
Bluebird 29
Bluebonnet 28
Bluebottle 60
Bluejay 29
Bobolink 29
Brahma 35, 36
Brant 29
Breadfruit 37, 41
Buckeye 38, 41
Bull 45
Bull/XLPE 47
Bunting 29
36
33
33
36, 37, 52
33
33
33
33
25
35, 37
48
49
48
40
40
35, 37, 52
37
35, 37, 52
37
25
35
36
24
33
52
52
55
35
49
52
49
54
49
48
36, 37
48
49
27
25
25
27
25
48
27
27
34
26
35, 37
36, 37
38
38
27
Alphabetical List
Code Word Table No. Page No.
Butte 34
Butterfly 60
Butternut 38, 41
C
Cabbage 64
Cairo 34
Camel 61
Camellia 28
Canary 29, 65
Canna 28
Canton 34
Caracal 61
Cardinal 29, 65
Carnation 28
Carp 66
Carrot 64
Cat 61
Catalpa 37
Catbird 29
Caterpillar 60
Cattail 28
Cenia 49
Cenia 51
Centipede 60
Chafer 60
Cherry 37, 39, 63
Cherry/XLPE 42
Chestnut 38, 41
Chickadee 29, 65
Chinquapin 37
Chokeberry 38
Chola 53
Chola/XLPE 55
Chow 45
Chow/XLPE 47
Chukar 29
Cicada 60
Clam 48
Clam/XLPE 50
Clegg 60
Clydesdale 52
Clydesdale/XLPE 54
Cochin 35, 36
Cockroach 60
Cockscomb 28
Cod 66
Collie 44
Collie/XLPE 46
Columbine 28
Conch 49
Conch/XLPE 51
Condor 29, 65
Coot 29
Coreopsis 28
33
48
36, 37
52
33
49
25
27, 54
24
33
49
27, 54
25
55
52
49
35
27
48
25
39
39
48
48
35, 37, 52
37
36, 37
26, 53
35
36
40
40
38
38
27
48
39
39
48
40
40
34
48
25
55
38
38
25
39
39
27, 54
27
25
Code Word Table No. Page No.
Cosmos 28
Costena 53
Costena/XLPE 55
Cottonwood 38
Cougar 61
Cowslip 28
Coyote 61
Crabapple 37, 40
Crane 29, 65
Cricket 60
Criollo 52
Criollo/XLPE 54
Crocus 28
Crow 29, 65
Cuckoo 29
Cumquat 37
Curlew 29, 65
Cusk 66
D
Dachshund 44
Dachshund/XLPE 46
Daffodil 28
Dahlia 28
Daisy 28
Darien 34
Dear 61
Dingo 61
Dipper 29
Doberman 44
Doberman/XLPE 46
Dog 61
Dogwood 28
Dorking 35, 36
Dotterel 35, 36
Dove 29, 65
Drake 29, 65
Drone 60
Duck 65
E
Eagle 29, 65
Earwig 60
Egret 29, 65
Elk 61
Elgin 34
Eskimo 45
Eskimo/XLPE 47
F
Falcon 29, 65
Ferret 61
Fig 37, 40
Fig/XLPE 43
Filbert 38, 41
Finch 29, 65
Flag 28
24
40
40
36
49
25
49
35, 37
27, 54
48
40
40
25
27, 54
27
35
27, 54
55
38
38
24
24
24
33
49
49
27
38
38
49
25
34
34
26, 53
27, 54
48
53
26, 53
48
27, 53
49
33
38
38
27, 54
49
35, 37
37
36, 37
27, 54
24
61TAIHAN Overhead Electrical Aluminum Conductors

62. Code Word Table No. Page No.
Flamingo 29
Flicker 29
Flint 34
Flounder 66
Fly 60
Fox 61
Fusus 48
Fusus/XLPE 50
G
Gannet 29
Ginkgo 37
Gladiolus 28
Gnat 60
Goat 61
Goldenrod 28
Goldentuft 28
Goldfinch 65
Goose 65
Gopher 61
Grackle 29, 65
Grape 63
Grapefruit 37, 40
Grasshopper 60
Greely 34
Grosbeak 29, 65
Grouse 35, 36
Grullo 53
Grullo/XLPE 55
Guinea 35, 36
Gull 65
Gumwood 38
H
Hackberry 38, 41
Hackney 53
Hackney/XLPE 55
Haddock 66
Haiotis 48
Haiotis/XLPE 50
Hake 66
Hanoverian 52
Hanoverian/XLPE 54
Hare 61
Haw 37
Hawk 29, 65
Hawkweed 28
Hawthorn 28
Hazelnut 38
Hen 29, 65
Heron 65
Herring 66
Heuchera 28
Hickory 38, 41
Hornet 60
Horse 61
27
26
33
55
48
49
39
39
27
35
25
48
49
25
24
53
54
49
27, 54
52
35, 37
48
33
27, 53
34
40
40
34
54
36
36, 37
40
40
55
39
39
55
40
40
49
35
26, 53
25
25
36
26, 53
53
55
24
36, 37
48
49
Code Word Table No. Page No.
Huckleberry 37, 40
Hyacinth 28
Hyena 61
I
Ibis 29, 65
Iris 28
Ironwood 37
J
Jaguar 61
Jessamine 28
Joree 29
K
Kingbird 29
Kiwi 29
L
Lamprey 66
Ladybird 60
Lapwing 29
Lark 29, 65
Larkspur 28
Laurel 28
Leghorn 35, 36
Lemon 37, 63
Leo 62
Leonids 62
Leopard 61
Libra 62
Lilac 28
Lily 28
Lime 63
Linnet 29, 65
Lion 61
Locust 60
Lupine 28
Lychee 63
Lynx 61
M
Macaw 65
Magnolia 28
Malemute 44
Malemute/XLPE 46
Mallard 29, 65
Mango 37, 63
Marigold 28
Mars 62
Martin 29, 65
Maybug 60
Meadowsweet 28
Melita 48
Melita/XLPE 50
Mercury 62
Merlin 29, 65
Midge 60
Mink 61
35, 37
24
49
26, 53
24
35
49
25
27
27
27
55
48
27
26, 53
25
24
34
35, 52
51
51
49
51
25
24
52
26, 53
49
48
25
52
49
54
25
38
38
27, 54
35, 52
25
51
27, 54
48
24
39
39
51
26, 53
48
49
Code Word Table No. Page No.
Minnow 66
Minorca 35, 36
Mistletoe 28
Mockernut 38
Mole 61
Molles 37, 40
Moon 62
Moose 61
Morgan 53
Morgan/XLPE 55
Morochuca 53
Morochuca/XLPE 55
Mosquito 60
Moth 60
Mulberry 37, 40
Mullet 66
Murex 48
Murex/XLPE 50
Mursia 49
Mursia/XLPE 51
Mustang 52
Mustang/XLPE 54
N
Narcissus 28
Nassa 48
Nassa/XLPE 50
Nasturtium 28
Nectarine 37, 39
Nectarine/XLPE 43
Neptune 62
Neritina 49
Neritina/XLPE 51
Nuthatch 29
O
Oldenburg 52
Oldenburg/XLPE 54
Olive 37, 40, 63
Olive/XLPE 43
Orange 37, 40, 63
Orange/XLPE 43
Orchid 28
Oriole 29, 65
Orion 62
Ortolan 29
Osprey 29
Ostrich 29, 65
Otter 61
Owl 65
Oxlip 28
Oyster 48
Oyster/XLPE 50
P
Palmino 53
Palmino/XLPE 55
55
34
24
36
49
35, 37
51
49
40
40
40
40
48
48
35, 37
55
39
39
39
39
40
40
25
39
39
25
35, 37
37
51
39
39
27
40
40
35, 37, 52
37
35, 37, 52
37
24
26, 53
51
27
26
26, 53
49
53
24
39
39
40
40
62 Overhead Electrical Aluminum Conductors TAIHAN

63. Code Word Table No. Page No.
Paludina 49
Paludina/XLPE 51
Pansy 28
Panther 61
Parakeet 29
Parrot 29, 65
Partridge 29, 65
Paw Paw 37, 40, 63
Peach 37, 40
Peach/XLPE 43
Peachbell 28
Peacock 29
Pear 37, 39
Pear/XLPE 42
Pecan 38, 41
Pekingese 44
Pekingese/XLPE 46
Pelican 29, 65
Penguin 29, 65
Peony 28
Percheron 52
Percheron/XLPE 54
Periwinkle 49
Periwinkle/XLPE 51
Persimmon 37, 40
Petrel 35, 36
Petunia 28
Pheasant 29, 65
Phlox 28
Phoebe 65
Phoenix 65
Pickerel 66
Pigeon 29, 65
Pignut 38, 41
Pike 66
Pinto 52
Pinto/XLPE 54
Piper 65
Plover 29, 65
Plum 37, 40
Plum/XLPE 43
Pluto 62
Pollock 66
Pomegranate 37, 40
Pomegranate/XLPE 43
Poppy 28
Portunus 48
Portunus/XLPE 50
Purpura 48
Purpura/XLPE 50
Q
Quail 29, 65
Quince 37, 40, 63
Quince/XLPE 43
39
39
24
49
26
27, 54
26, 53
35, 37, 52
35, 37
37
24
26
35, 37
37
36, 37
38
38
26, 53
26, 53
24
40
40
39
39
35, 37
34
25
27, 54
24
53
54
55
26, 53
36, 37
55
40
40
53
27, 54
36, 37
37
51
55
35, 37
37
24
39
39
39
39
26, 53
35, 37, 52
37
Code Word Table No. Page No.
R
Rabbit 61
Raccoon 61
Rail 29
Raisin 63
Raven 29, 65
Redbud 38
Redwing 29, 65
Robin 29, 65
Rook 29
Rose 28
Ruddy 29
Runcina 49
Runcina/XLPE 51
S
Sagebrush 28
Sapsucker 65
Sardine 66
Sassafras 37
Saturn 62
Scissrotail 65
Scorpion 60
Scoter 29
Sculpin 66
Scup 66
Setter 45
Setter/XLPE 47
Shad 66
Sheep 61
Shepherd 45
Shepherd/XLPE 47
Silverbelt 37
Sirius 62
Skunk 61
Snapdragon 28
Sneezewort 28
Snowbird 65
Sole 66
Spaniel 44
Spaniel/XLPE 46
Sparate 29
Sparrow 29, 65
Spider 60
Squab 29
Squirrel 61
Starling 29, 65
Stilt 29
Suffolk 53
Suffolk/XLPE 55
Sultana 63
Sumac 37
Swallow 29
Swan 29, 65
Swanate 29
49
49
27
52
26, 53
36
27, 54
26, 53
27
24
27
39
39
25
53
55
35
51
54
48
27
55
55
38
38
55
49
38
38
35
51
49
25
24
54
55
38
38
26
26, 53
48
26
49
27, 54
27
40
40
52
35
26
26, 53
26
Code Word Table No. Page No.
Swift 29
Sycamore 37
Syringa 28
T
Tanager 29
Tangerine 37
Tarantula 60
Taurus 62
Teal 29
Tern 29
Terrier 45
Terrier/XLPE 47
Thrasher 29
Thrush 29
Tiger 61
Toucan 65
Trillium 28
Triton 49, 62
Triton/XLPE 51
Trophon 48
Trophon/XLPE 50
Tulip 28
Tupelo 37
Turkey 29, 65
U
Uranus 62
Ursula 62
V
Valerian 28
Venus 62
Verbena 28
Violet 28
Voluta 49
Voluta/XLPE 51
W
Walnut 38, 41, 63
Wasp 60
Waxwing 29, 65
Weasel 61
Weevil 60
Whelk 49
Whelk/XLPE 51
Wolf 61
Wood Duck 29
Wren 65
Z
Zebra 61
Zinnia 28
Zuzara 49
Zuzara/XLPE 51
27
35
24
27
35
48
51
26
27
38
38
27
26
49
53
25
39, 51
39
39
39
24
35
26, 53
51
51
24
51
24
24
39
39
36, 37, 52
48
26, 53
49
48
39
39
49
26
53
49
24
39
39
63TAIHAN Overhead Electrical Aluminum Conductors

64. Head Office
Overseas Sales Team
Domestic Sales Team
Insong Building, 194-15, 1-ga, Hoehyeon-dong, Jung-gu, Seoul, Korea
Tel. 82-2-316-9114 Fax. 82-2-316-9429
Tel. 82-2-316-9433 Fax. 82-2-316-9429
Tel. 82-2-316-9261~4 Fax. 82-2-316-9429
www.taihan.com
R & D Center
996, Siheung-dong,
Geumcheon-gu, Seoul,
Korea
Tel. 82-2-890-9114
Fax. 82-2-806-0186
Anyang Plant
785, Gwanyang-dong,
Dongan-gu, Anyang,
Gyeonggi-do, Korea
Tel. 82-31-420-9114
Fax. 82-31-423-2685
Sihung Plant
113-119, Sihung-dong,
Geumchon-gu, Seoul,
Korea
Tel. 82-2-890-9114
Fax. 82-2-808-6320
Ansan Plant
603, Seonggok-dong,
Danwon-gu, Ansan,
Gyeonggi-do, Korea
Tel. 82-31-490-5114
Fax. 82-31-491-3721
R & D CENTER AND PLANTS
Singapore Office
629 Aljunied Road
#05-19, Cititech Industrial
Building, Singapore
389838, Singapore
Tel. 65-6842-5069
Fax. 65-6842-5076
Kuala Lumpur Office
15th Floor, Kenanga
International, JL. Sultan
lsmail, 50250 Kuala
Lumpur, Malaysia
Tel. 60-3-2161-8017
Fax. 60-3-2161-3628
Riyadh Office
Al Akariyah Shopping
Center 2, Room No.726,
Olaya Road, P.O.Box 201,
Riyadh, Saudi Arabia
Tel. 966-1-419-0227
Fax. 966-1-419-0262
Shanghai Office
A410 Far East International
Plaza 319 Xian Xia Road
Changning District,
Shanghai, China
Tel. 86-21-6235-1263
Fax. 86-21-6235-1267
Philippines Office
10A Queen’s Street Dona
Rita Village Talamban
Cebu City 6000
Tel. 63-32-346-8799
Fax. 63-32-344-8581
Dubai Office
Flat no. 705, Al Safa
Tower, Sheikh Zayed
Road, Dubai, U.A.E
P.O.Box 117561
Tel. 97-14-331-7233
Fax. 97-14-331-7322
Thailand Office
253, 26th Floor Asoke,
Sukhumvit 21 Road,
Klongtoeynua, Wattana,
Bangkok 10110, Thailand
Tel. 66-2-664-1464
Fax. 66-2-664-4002
Malesela Taihan Electric Cable (Pty) Ltd.
Vereeniging 1930, Steel Road,
Peacehaven Vereeniging 1939,
Gauteng, South Africa
Tel. 27-16-450-8200
Fax. 27-16-423-3406
http://www.m-tec.co.za
Skytel Co., Ltd
Skytel Plaza Building
ChinggisKhan Ave-9,
Ulaanbaatar 210603, Mongolia
Tel. 976-1-318488
Fax. 976-1-318487
http://www.skytel.com
OVERSEAS OFFICES
OVERSEAS SUBSIDIARIES
Specifications are subject to improvement or change without notice. Please contact your local agent or TAIHAN to confirm the latest product information. TPE-0501-0506