Muhammad Mahaboobali Khan is applying for a QA/QC position and has over 20 years of experience in inspection and QA/QC roles on oil, gas, and petrochemical projects. He is currently working as an Inspection Coordinator for Amec Foster Wheeler on the KNPC Clean Fuels Project in the Netherlands. Khan has extensive experience coordinating inspections, reviewing QA/QC documentation, ensuring compliance with standards, and managing non-conformances. He is seeking a stable, long-term position and is willing to relocate or travel as needed.

1. Muhammad Mahaboobali Khan
QA/QC/Inspection Supervisor- Procurement
Current project:
 KNPC- Clean Fuels Project- MAB2
Core skills: QA/QC/ Inspection
Dear Sir/ Madam,
Having come to know that there are some vacancies existing in your kind control, I would
like to apply for the mentioned position;
I have more than 20 years’ experience {9 years in inspection/ site execution (QA/QC) of oil,
gas, refineries, petrochemicals and LNG: onshore (Green/ Brown field) construction
projects worth more than 3 billion USD in Gulf countries and 10 years in maintenance of
paper industries in India}.Well versed with international standards (ASME/ ISO/ EN/ Etc.)
Current and prior working experience with ARAMCO, SABIC, KNPC, KOC and QAPCO.
Has worked on five projects within the last eight years each with a value in excess of US$
500 million.
So, please go through my ‘Resume’ on following leaflets, which will enlighten you with
some more details.
Thanking you sir,
Yours truly,
Muhammad Mahaboobali khan,
[B. Engg. (Mechanical); AWS-CWI; ASNT. Level-2; ISO.9001:2008- QMS_Lead Auditor],
Mo. +31-619358855/ +91-9029396970.
Emails: mmkhan65@gmail.com,
muhammadmkhan@skype.com.
Qualifications/registration(s)
 BEng (Mechanical)

2.  BSc (Physics)
 AWS-CWI (Certificate# 12093271)
 ASNT- Level II (RT, UT, MP and LP)
 ISO 9001:2008 - QMS Auditor
 Diploma in Materials Management
 Diploma in Industrial Safety.
 Diploma in Environmental Management & ISO14000
Employment history: -
Amec Foster Wheeler
Inspection Coordinator, KNPC- CFP- MAB2, Netherlands (2014- Till now)
 Review contract requirements
 Will maintain close liaison with each other regarding project inspection matters and with
PMC Chief Inspector regarding critical inspection issues.
 Will identify opportunities to use the same Company TPIA Inspector at Vendors works in
order to minimise duplication and overlap of inspectors and reduce expenses by sharing
resources.
 Set-up and maintain the master inspection files.
 Review Contractors quality control management programmes, relevant documents and
procedures.
 Monitor Contractor’s conformance/compliance with project requirements in the ITPs
and check that PMC required inspection points have been correctly entered.
 Communicate with PMT on Vendor ITPs.
 Process correspondence, communications and reports required for the coordination of
inspection activities.
 Contractor in consultation with the PIC and PMT inspection representative will develop
an inspection plan to identify the proposed number of inspection visits by the Contractor
and Company TPIA that reflects the agreed level of inspection for all Purchase Orders.
The inspection plan will detail all Vendors and their specific geographic locations.
 Will maintain and update the inspection plan for all planned inspection visits as well as
the inspection log sheet for all completed inspection visits.
 Manage and report on Company TPIA Inspection costs on a monthly basis.
 In exceptional circumstances, attend inspection activities on critical equipment as
directed by the PMC Management.

3.  Request and review CVs of suitable TPIA Inspectors, when presented with a requirement
to use TPIA inspector.
 Review the CVs of the Contractors Inspectors as applicable.
 Select the most suitable TPIA Inspector for the required inspection activity giving due
consideration to the Vendor involved and the hourly rate charged by the
TPIA. Consult with PMC Chief Inspector regarding previous knowledge of past
performance of the TPIA inspectors in making a considered selection.
 Will issue an inspection itinerary provided by Contractor, on a weekly basis, in
accordance with the agreed distribution list.
 Audit visits may be carried out at Vendor works in accordance with the audit procedure,
5230-8830-PR-0002, to monitor that Contractor and Vendor maintain compliance with
Project QA/QC requirements.
 Expedite Contractor for inspection and non-conformance/compliance reports
 Review, log and distribute Contractors reports in accordance with the agreed distribution
list.
 Review, log and distribute Company TPIA inspection reports in accordance with the
agreed distribution list. These reports will only be distributed following an internal
review process, and as such they will be considered official. Timing and resource issues
prevent signed copies being made available.
 Track status, and ensure Contractor close out of NCRs at, or before, final inspection.
 Will advise the PMC Project Procurement Manager and Engineer of any need for the
Contractor to change the level of inspection considered necessary for a particular
Purchase Order or Vendor. Once approved by Company/PMC any required increase in
the level of inspection will be communicated to the Contractor.
Bonace Engineers
Vendor Inspector /Coordinator, Reliance Project, India (2013 – 2014)
 Review ITPs and inspection related documents and procedures.
 Receiving notification for inspection and allocating suitable inspectors either staff or TPI.
 Send assignment packages (purchase order, material requisition, project specifications
and special instructions) to the assigned inspector.
 Arranging and attending pre-inspection meetings with vendors.
 Review inspection reports and forward onto project, client, etc.
 Carry vendor and site inspection as required.

4. Petrofac International Ltd
Senior QA/QC Engineer, Aramco Project, Saudi Arabia (2012 – 2013)
 Reviewing vendors ITPs and inspection procedures in accordance with Saudi Aramco
standards/ SAMSS/ project specifications/ international standards (ASME IX, ASME VIII, B
31.3, API)
 Reviewing piping materials requisitions.
 Coordinating project specific quality requirements with Client QA/QC representatives.
 Training Saudi national junior engineers.
 Other jobs as and when instructed by superiors for field works.
 Reporting to Quality Manager.
Jacobs Engineering India Ltd
Principal Field Engineer, DHT, HPCL Project, India (2012)
 Review ITPs and inspection related documents and procedures.
 Reviewing and approving contractor quality documents in accordance with relevant
ASME codes.
 Monitoring QMS implementation carried out site surveys and audits as required.
 Inspection coordination with vendors and allocating suitable inspectors either staff or
TPI,
 Inspection coordination with Clients when required.
 Attend pre-inspection meetings.
 Witness NDT activities including welders’ performance and approval, RT film
interpretation, PWHT reports, hydro testing, thickness surveys and fabrication
surveillance.
 Witness of fit-ups, welding and line checking.
 Supervising &monitoring site construction activities in accordance with approved
drawings.
 Co-ordinating with piping design engineers for resolving problems, materials receiving
inspection reports, materials preservation and storage.
 Supervise sub-contractor QC personnel, conducting meetings, Preparing and controlling
QC documentation &records.

5. International Inspection Centre
Inspection Engineer, KOC, Ahmadi, Kuwait (2007 – 2011)
 Coordination with Client Quality-representatives for inspection activities.
 Coordination with Inspection agencies as required.
 Material receiving inspection (Mechanical, electrical, instrument) preservation, storage,
maintaining, and systemupdating.
 Visual and dimensional inspections.
 Inspection of DPT, PMI (alloy verification), ferrite content testing, welding, welding
consumables, fit-ups and welded joints.
 Inspection of piping pressure testing, Bolts &Gasket verification, and Bolts torque of
piping flanges.
 Controlling inspection documentation.
Dar Al- Riyadh Holding Co
QA/QC Mechanical Engineer, Sabic, Saudi Arabia (2006 – 2007)
 Coordination and management of projects inspection activities.
 Monitor NCRs and follow-up corrective actions and close-out.
 Client side day to day site inspection activities related to piping.
 Attend and chair Pre-Inspection Meetings.
 Preservation of material, quality route surveys, Safety of workmen.
 Review suppliers QA/QC documentation and Inspection &Test Plans
 Carry out Shop Inspection and Audits of Equipment and Materials and complete
Inspection Reports
 Material receiving inspection, to check the piping system&spools in compliance with
isometric drawings, P&IDs, GA drawings, BOM, International codes, standards
&specifications.
 Inspection visually &dimensionally, square-ness, fit- up, material preservation, Checking
calibration certificates, updating,
 Witnessing NDT, welding consumables’ baking and documentation.
 Preparing QC documents, ensuring safety requirements are in place and welding is on
accordance with QCP, ITP and WPS &PQR
 Daily welding reports crosschecking, witness spool cleaning, and hydro/ Pneumatic/ R-
pad tests, Hydro test packs preparing &submission, Holiday tests, Material certificates,
visual &dimensional checks.
 Witness PMI, Ferrite content test, PT, MT, RT &UT

6.  Check material storage &segregation, bolt torque, static &rotary equipment installation,
Foundation, cantering, levelling, reverse alignments, hot alignments, cleanliness,
greasing, testing, Structural installation, QC checks and alignments.
Teyseer Contractors Co
Piping Inspector - QA/ QC, Qapco EP- 2 Project; QATAR (2006)
 Piping Fabrication and installation.
 Filed inspections of piping systems &spools in accordance with isometric drawings,
P&IDs, GA drawings, International codes, standards &specifications.
 Field inspections of materials preservation and storage,
 Carried visual, dimensional, squareness and fit- up inspections.
 Checking calibration certificates and updating records.
 Witnessing NDT, welding consumables’ baking and documentation.
 Raise NCRs and follow-up corrective actions
 Preparing QC documents, ensuring safety requirements are in place and welding is on
accordance with QCP, ITP and WPS &PQR
 Daily welding reports crosschecking, witness spool cleaning, and hydro/ Pneumatic/ R-
pad tests, Hydro test packs preparing &submission, Holiday tests, Material certificates,
visual &dimensional checks.
 Witness PMI, Ferrite content test, PT, MT, RT &UT
 Check material storage &segregation, bolt torque, static &rotary equipment installation,
Foundation, cantering, levelling, reverse alignments, hot alignments, cleanliness,
greasing, testing, Structural installation, QC checks and alignments.
Reliance Industries Limited
Piping Engineer- site, PTA-3, Hazira, India (2005 – 2006)
 Co-ordination and management of projects inspection activities
 Review suppliers’ Inspection and Test Plans in accordance with project requirements
 Maintain Project Inspection Schedules
 Preparation and distribution of Inspection Assignments packages for Field Inspectors
 Review and distribution of Fields Inspections Reports, Release Notes and NCR’s
 Attend and chair Pre-Inspection Meetings
 Carry out Shop Inspection and Audits of Equipment and Materials and complete
Inspection Reports

7.  Ensure that all work undertaken is accomplished in compliance with Code of Business
Conduct and Ethics and Corporate Policies
 Supervising and guiding the Site piping fabrication, erection activities, material’s
preservation, storage, maintaining, Inspection and punch listing in accordance with plot
plans, Isometric drawings, piping and instrument diagrams, international Codes,
standards & specifications.
 Preparing QC documents.
Chiyoda Foster Wheeler CP LLC
Piping Supervisor (FSU - Coordinator), Qalhat LNG Project- Oman (2005)
 Site Piping, structural, pressure vessels’ erection inspection.
 Site quality surveys, auditing workmen.
 Mechanical/ Piping material preservation, storage, maintaining, checking/ Inspection,
punch listing, confirming, monitoring site erection activities.
 Storage of piping spools, protection of piping ends, flanges, Valves, segregation.
 Attend weekly site audits with clients & sub- contractors.
 Daily surveillance reports to FSU- Coordinator, Preparing QC documents, etc,
AMS General Cont Est
Piping Inspector (QA/ QC), Petrokemya – Polythene Project, Saudi Arabia (2003)
 Field inspections: piping, structural, pressure vessels, Mechanical/ Piping material ,
erection activities, material’s preservation, storage, maintaining, Inspection and punch
listing in accordance with plot plans, Isometric drawings, piping and instrument
diagrams, international Codes, standards & specifications.
 Inspection of D.P.T, P.M.I (alloy verification), ferrite content tests.
 Inspection of welding consumables & it’s records, Inspection of fit-up & welded joints
 Co-ordination with Clients’ QC-Inspectors.
 Inspection of welding activities, Visual & dimensional Verification, pressure tests for
piping, Bolts & Gasket verification, Bolt torque application and Piping flanges.
 Inspection documents controlling.

8. NESMA (Cat Joint Consortium)
Piping Inspector (QA/ QC), Haradh Gas Plant – Aramco Project; Saudi (2002 –
2003)
 Regular site inspections- piping, structural, pressure vessels, Mechanical/ Piping material
preservation, storage, maintaining, checking/ Inspection and punch listing
 Inspection of D.P.T, P. M. I (alloy verification) and ferrite content tests
 Inspection of welding consumables & it’s records, Inspection of fit-up & welded joints
 Coordination with Clients’ QC-Inspectors
 Inspection of welding activities, Visual & dimensional Verification
 Inspection of pressure tests for piping, Bolts & Gasket verification, Bolt torque
application and Piping flanges
 Inspection documents controlling
Rahimuddin Engineers & Cont.
Mechanical Engineer, Power Plant & Chemical Projects (2001 – 2002)
 Mechanical/ Piping material preservation, storage, maintaining, checking/ Inspection and
punch listing
 Site fabrication and piping erection according to plot plans, Isometric drawings, piping
and instrument diagrams, international Codes, standards and specifications
 Conducting progress review meeting
Ballarpur Industries Ltd
Executive Engineer (1998 – 2001)
 Renovation works: Site fabrication & piping erection according to plot plans, Isometric
drawings, piping and instrument diagrams.
 Conducting progress review meeting.
 Day to day maintenance activities.
Earlier Career Highlights
1997 - 1998 Assistant Engineer, Titagarh Paper Mills Ltd.
1995 - 1997 Assistant Engineer, Sanghi Textiles ltd.
1994 - 1995 Graduate Engineer-Trainee, The Coastal Chemicals Ltd.

9. PersonalDetails :
Date of Birth (Age) : 08/08/1965 (50 years)
Marital Status: Married : Religion: Muslim
Nationality : Indian
Height : 167 Cms
Weight : 61 Kgs
Languages Known : English, Hindi, Urdu and Telugu
Driving Licenses (LMV) : Saudi Arabia, Kuwait& India
Passport Details : -
Passport Number: G.6677502
Issue Date: 14/04/2008; Expiry Date: 13/04/2018
Place of Issue: Kuwait; Place of Birth: Srikakulam (AP)
Address : Flat# 303, Plot# 167/168,
Sector- 10; Sarada Sagar,
New Panvel (E) - PIN: 410206.
Navi Mumbai (India)
Last Salary (CTC) : 3230 GBP/ Month+ HRA+ Medical
Expecting Basic Salary : Negotiable
Notice Period : Not Applicable
Relocation : Willing to relocate
Travelling : Yes, Ready to travel
Reason for leaving : Looking for a stable& long term tenure,
Yours faithfully,
(Muhammad Mahaboobali Khan)