1. Sanding and cutting the product<br />left99695What you did: Today I have done some sanding and cutting. I have sand my product’s each sides to make it clearly. I have to sand a lot to make my product’s sides clearly. It was really hard to sand them all. After finish sanding all sides, I started to cut them with pull saw. I have to cut them to different height. So I have to concentrate on cutting to different height.<br />-2552700142240Changes to your plan: I was having hard with gluing all the sides before using PVA, so it takes lots of times. But I have finished gluing all of the sides, and I also finished sanding them. Finally, I started to cut them to a different height, so the progress is going well. I think I don’t have to change my plan.<br />Emotions: I was boring while sanding the sides using the garnet paper. The reason why I was boring was because I was doing the same things everyday. But I have finished sanding them, so I started to cut them. And when I start to cut them I feel interesting. Because I was not cutting the woods for long time, and I have just done sanding and gluing.<br />What’s next: I have to cut them all first and then after finish cutting them all, I should move on to coloring them all. <br />Area of Interaction and Learner Profile: I think I was inquirer while cutting my product’s sides. <br />Why: The reason why I think I was inquirer while cutting my product’s sides is because I have enjoyed while cutting them and it was my first time to use pull saw to cut the woods. It was really interesting experience.<br />Tools: Pull saw, Desk Sander<br />