1. Check and sanding the sides before gluing <br />01517650210756504037965<br />The date: Mar.1.2011<br />What you did: Today we have double period, but I didn’t done many works. I was just sanding and checking the plywood that I am going to use for my product’s sides. But while checking the plywood, I made mistakes. The mistakes were the plywood was too short to gluing it together.<br />Changes to your plan: I made mistakes while checking the plywood. The problem was the plywood was too short to stick it together, so I think I have to make some plywood again.<br />Sanding The PlywoodEmotions: I was sad that I have to make some plywood again. While sanding the plywood, I was enjoying sanding it, so I think I sanded them a lot than I thought before. And I was so hard to check the plywood that is it fit or not. The reason why I was hard is because I have to check almost 26 pieces to gluing them.<br />Checking the Plywood before sticking them together.What’s next: After check and stick them all, I have to cut the top of my product. It will be a hard job to cut the top of my product. So I think I have to concentrate while cutting the top of my product.<br />Area of Interaction and Learner: I think I was thinker while checking the plywood that I am going to use for my sides.<br />Why: The reason why I think I was thinker while checking the plywood that I am going to use for my product’s sides is because I have to concentrate and I need to check them accurately to fit them together if I am going to gluing them.<br />Tools: Plywood, Pencil, Eraser, Tri square, Desk sander and Goggle<br />