1. Cutting the starfish shape side<br />099695The date: Feb.21.2011<br />What you did: Today, I had no time to do anything during the period. Because we have only single period, and I have lost my material so I have to make a new piece of starfish shape side.<br />Changes to your plan: I haven’t done lots of work because we have only single period, so I only did a few works, for example, I cut a new piece of starfish shape side and sand it to have angle. So I don’t have to change my plan yet.<br />Emotions: Today, I was little bit upset, because I had lost one of material that I have to use for the side. I have to find new plywood to make a piece, and I have to do a hard work again. I was tired while cutting the plywood, so my shoulder was little bit hurt.<br />What’s next: I have to stick the shape sides all together. And then after finish sticking, I have to change the top shape of my product.<br />Area of Interaction and Learner Profile: I think I was knowledgeable while cutting the plywood to make my product’s side.<br />Why: The reason why I think I was knowledgeable while cutting the plywood to make my product’s side was because I have learnt how to use Tenon saw and Wood vice. After learning how to use Tenon saw, I have remembered how to use it and I have no more problem with using the Tenon saw.<br />Tools: Tenon saw, Wood vice, Pencil, Tri square, Plywood, Bench hook and Disk sander <br />