1. Measuring and Mark out Starfish Sides<br />010795The Date: 8th February 2011<br />What you did: Today, I worked on marking the starfish sides, and grind the woods to the shape that I want. My product needs to be starfish shape, so I have to make angle. I marked the angles on the woods so that I can stick them together accurately. Today, I’ve finished marking the angles on woods. So I started to grind the woods that I have marked out. <br />-2180590419735Changes to your plan: This week, I supposed to mark the angles on the woods, and I achieved this work. So I started to grind the woods that I have marked on the woods with lines. <br />Emotions: Today, while grind the woods, I felt little bit tired. Why I felt tired was because I have to grab the woods with my hand and keep on pushing and pulling. And while grind the woods, I haven’t done carefully, so I got scratch by sanding board. It was little bit hurt, but I can endure from the scratch.<br />What’s next? First sand the timber pieces that I have cut out marked with lines. After finish sanding the pieces, stick them together.<br />Areas of Interaction and Learner Profiles: I think I was well balanced when I got scratch by grind the woods. <br />Why: The reason why I think I was well balanced is because I got a scratch while sanding the timber of my sides, but I just don’t care about that and kept on working.<br />Tools that I used: Sanding board, Pencil, Eraser, Plywood, Tri square<br />