1. Measuring and Mark out the starfish shape<br />299720099695The Date: 24th January 2011<br />What you did: Today I was working on the side of my product. I drew the sides on the plywood first, after drawing the sides that I need for my product, I started to cutting the plywood. But still I haven’t finished cutting the plywood.<br />Changes To Your Plan: This week I supposed to measure and mark out my product’s sides, and I finished measuring and mark out the sides, so I started to cut it. If I keep on working like this I might be finish cutting next week.<br />Emotions: While measuring and mark out the sides, I had a problem. The problem was I couldn’t design my product, as I want, so I felt little bit vain. But Mr. Anderson said I could change my product’s shape to have angle so I can make my product easy. I changed my product that has angles. <br />What next: First measure and mark out the product’s sides.<br /> After finish measuring and mark out the product’s sides, start to cut.<br />Areas of Interaction and Learner Profiles: I think I was principled on that day. Why: The reason why I think I was principled is because I have got advice by someone that my product looks like hard to make without any angles, so I changed my mind to change my product to have angle.<br />