1. DT Processes journal Thursday-3/31/2011 <br />Measure and marking out the 8 panels of my stool<br />What I did<br />First I used try square, ruler, and pencil to measure and mark out the place I want to cut then I used the tendon saw to cut out the shape from a big piece of pine wood in 8 piece of 200mm, for both 180mm and120mm wide.<br />What is next<br />I am going to finish cutting 8 piece of panels for my stool then I will file all the panels smooth.<br />Why<br />This is one of the step for making my stool.<br />Emotion<br />I was very happy and tired; happy because this is the first time I have such thing like this. I am tired because it uses lot strength.<br />Learner Profile<br />I think it is very reflective, because I find out after I cut out the small piece of timber the edge is very rough, so I used a file to smooth the bottom edge of the timber so it looks very good. <br /> 194119565405Using a tendon saw to make the two-piece the same0Using a tendon saw to make the two-piece the same<br />1943100127000Measure and mark out the place I want to cut.00Measure and mark out the place I want to cut. <br />