Event-Driven Architecture Masterclass: Integrating Distributed Data Stores Ac...
3.4.1 Mez Volume Damper Kit Jk A 02
1. 3.4 VOLUME DAMPER KIT
3.4
REGULATION OF AIR FLOW
3.4.1 MEZ-VOLUME DAMPER-KIT JK-A-02
Toothed wheel outside
- Aluminium blade without valve blade seal
- Temperature resistance: -20°C till +80°C
- Fin spacing 100 mm
Art.-Nr. Product Material Dimensions VPE Weight
930/1 ALUMINIUM BLADE STANDARD 100 Aluminium 100 mm x 5 m 200 m 0,900 kg/m
931/2 TOOTHED WHEEL outside Plastic 100 mm 100 units 0,028 kg/unit
for steel sheet and aluminium blade
932/1 HEXAGONAL BEARING Plastic 100 units 0,001 kg/unit
932/2 AXLE short (single-sided toothed wheel) Plastic 100 units 0,004 kg/unit
932/3 AXLE long Plastic 100 units 0,006 kg/unit
933/1 DRIVE AXLE Galv. steel 10 x10 x 150 mm 050 units 0,102 kg/unit
933/2 FASTENING BOLTS Aluminium 10 x10 x 40 mm 100 units 0,003 kg/unit
934/1 RUBBER CORNER PROFILE Rubber 010 m 0,027 kg/m
936/10 COVER – profiled Galv. steel 1,25 mm 20 x120 mm x 5 m 050 m 1,594 kg/m
936/11 SIDE SECTION – profiled, Hexagonal Galv. steel 1,25 mm 20 x120 mm x 2,5 m 050 m 1,500 kg/m
boring, Hole centre distance 100 mm
936/40 COVER – profiled Galv. steel 1,25 mm 30 x120 mm x 5 m 050 m 1,780 kg/m
936/41 SIDE SECTION – profiled, Hexagonal Galv. steel 1,25 mm 30 x120 mm x 2,5 m 50 m 1,700 kg/m
boring, Hole centre distance 100 mm
935/2 MEZ-CORNER for frame profiles 20 mm Galv. steel 250 units 0,036 kg/unit
935/3 MEZ-CORNER for frame profiles 30 mm Galv. steel 250 units 0,066 kg/unit
SECOND OPTION
Art.-Nr. Product Material Dimensions VPE Weight
936/1 SIDE SECTION – non-profiled Galv. steel 1,25 mm 175 x 2500 mm 020 units 4,400 kg/unit
Hexagonal boring, distance 100 mm
All Rights Reserved
936/4 SIDE SECTION – nicht profiliert Galv. steel 1,25 mm 192 x 2500 mm 020 units 6,500 kg/unit
Hexagonal boring, distance 100 mm
935/2 MEZ-CORNER for frame profiles 20 mm Galv. steel 250 units 0,036 kg/unit
935/3 MEZ-CORNER for frame profiles 30 mm Galv. steel 250 units 0,066 kg/unit
2. 3.4 VOLUME DAMPER KIT
3.4
REGULATION OF AIR FLOW
3.4.1 MEZ-VOLUME DAMPER-KIT JK-A-02
Toothed wheel outside
Workmanship Guidelines:
Toothed wheels:
- Toothed wheels with a maximum height or breadth
of 1000 mm can be affixed on a single side
- Toothed wheels with a breadth and height above
lichte Höhe
1000 mm need to be affixed on both sides 90
hight
- For single-sided toothed wheels place axis
temporarily on the opposite side
- For temperatures above +50°C all axles
are to be fastened using fastening bolts
Actuator:
width
- Starting from a height of 1300 mm – a connecting rod lichte Breite
needs to be installed
Blade layout: C - P rofil
Clear width minus 3 mm 6
30
Overall dimensions: 120
1
The maximum breadth needed for the overall dimensions 6
can be taken from the diagram below
20
120
maximale Klappenbreiteblade
max. breadth of valve in Abhängigkeit von ∆P
2000
1750
120
Druckdifferenz [Pa]
1500
Pressure loss (Pa)
1250
1000
750
500
250
0 200 400 600 800 1000 1200 1400 1600 1800 2000
Jalousieklappenbreite
valve blade dimension
Pressure loss Motor
Stellkraftdiagramm /
Druckverlustkennlinie (in geöffnetem Zustand)
Pressure loss (open valves) Motordrehmoment
H (m) 1,5
°
300
Klappenöffnungswinkel °
45
Pressure loss [Pa]
15 Nm
Angle of blade
Druckverlust
1,0
200
8 Nm
60° 0,5
100
90°
All Rights Reserved
1 2 3 4 5 0 0,5 1,0 1,5
W[m/s] B (m)
1