This document provides information on two cable jacket strippers, the MK04 and MK01A. The MK04 is designed for stripping large diameter cables from 0.79 to 2.36 inches. It features adjustable blades, roller support for smooth stripping, and can perform spiral cuts, longitudinal cuts or end stripping. The MK01A is for stripping insulation from 0.31 to 0.98 inch cables and removing copper screening from coaxial cables. It also has adjustable blades and roller support for precise stripping of materials like rubber, PVC, nylon and cotton. Both strippers are designed for industrial environments and consistent, repetitive stripping jobs.
Boddingtons Electrical
Thorne & Derrick UK distribute a broad range of Boddington cable jointing and cable preparation tools for 11kV 33kV cables. Boddington tools are a very popular choice by LV and HV jointers for working upon and preparing cables prior to jointing or terminating.
Boddingtons Cable Preparation Tools
Boddingtons Electrical is a leading manufacturer and supplier of insulated tools and electrical safety products including:
Cable Knives (Hacking & Coring)
Cable Sheath & Insulation Removal Tools
Cable Sheath Cutters
Cable Sheath Cutting Pliers
Cable Sheath Stripping Pliers
Consac Sheath Cutting Tools
Stripping Tool for Bonded Semi-Con Screens
Stripping Tool for Peelable Semi-Con Screens
XLPE Insulation Removal Tools for High Voltage Cables
XLPE Insulation Stripping Tools for HV Triplex Cables
Allows easy mid-span access to optical fibers in loose buffer tubes and can access tube sizes from 1.9 mm to 3.0 mm.
Specifications
Shaves precise opening to prevent fiber damage.
Sizing channels to easily determine tube size.
Locking mechanism ensures tool will remain closed through entire shaving operation. Replacement Blade: Part No.: 80935 (5 Blades – 2 screws)
Dimensions: 3.9 x 1.5 x 0.7 in. (99 x 38 x 18 mm)
Weight: 1.36 oz (38.5g)
automotive wire harness tape we also called automotive fleece tape, cloth wire harness tape, wiring harness tape..., which is mainly used in automobile industry for car wire hanress wrapping.
Boddingtons Electrical
Thorne & Derrick UK distribute a broad range of Boddington cable jointing and cable preparation tools for 11kV 33kV cables. Boddington tools are a very popular choice by LV and HV jointers for working upon and preparing cables prior to jointing or terminating.
Boddingtons Cable Preparation Tools
Boddingtons Electrical is a leading manufacturer and supplier of insulated tools and electrical safety products including:
Cable Knives (Hacking & Coring)
Cable Sheath & Insulation Removal Tools
Cable Sheath Cutters
Cable Sheath Cutting Pliers
Cable Sheath Stripping Pliers
Consac Sheath Cutting Tools
Stripping Tool for Bonded Semi-Con Screens
Stripping Tool for Peelable Semi-Con Screens
XLPE Insulation Removal Tools for High Voltage Cables
XLPE Insulation Stripping Tools for HV Triplex Cables
Allows easy mid-span access to optical fibers in loose buffer tubes and can access tube sizes from 1.9 mm to 3.0 mm.
Specifications
Shaves precise opening to prevent fiber damage.
Sizing channels to easily determine tube size.
Locking mechanism ensures tool will remain closed through entire shaving operation. Replacement Blade: Part No.: 80935 (5 Blades – 2 screws)
Dimensions: 3.9 x 1.5 x 0.7 in. (99 x 38 x 18 mm)
Weight: 1.36 oz (38.5g)
automotive wire harness tape we also called automotive fleece tape, cloth wire harness tape, wiring harness tape..., which is mainly used in automobile industry for car wire hanress wrapping.
Description:
The 6NPM is a very high efficiency, (101.8 dB 1watt / 1 meter) 6-inch midrange speaker with incredibly linear frequency response characteristics and ultra low harmonic distortion artifacts. The 6NPM has extremely high sound quality. The 6NPM uses a lightweight paper pulp, specifically developed for this application. This unique cone provides the ideal weight to strength ratio.
At the core of the 6NPM is it’s voice coil technology featuring edge wounded aluminum ribbon wire. Unique lightweight and very short former provides the ideal transfer of power between the voice coil and the cone assembly and assists in reducing the distortion artifacts. By combining this material with the state of the art adhesives, the 6FPM delivers incredible performance. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. The neodymium magnet is in a direct contact with the CNC exposed aluminum section of the basket, hold in place by our thermal transfer adhesives. This design dramatically improves the heat transfer. The 6NPM is ideal for use in both sealed and vented enclosure designs. The most suitable applications are in high quality professional audio, as line array systems, 3-way designs, where extreme SPL outputs are desired. The 6NPM can be horn loaded or used in directly radiated midrange applications.
This tape is a self amalgamating, low voltage rubber tape which meets the requirements of ASTM-D4388, Type I. It easily conforms to irregular shapes and sufaces yielding a void free, electrically stable build up. Compatible with all extruded dielectric cable insulation.
Cembre Cable Cutters & Cutting Tools - UK Distributor
Manual, Ratchet, Hydraulic, Battery Cable Cutting Tools
Cembre cable cutters are ideal for cutting low and high voltage power, control and instrumentation cablesincluding steel wire armoured (SWA) cables.
Cembre hydraulic cable cutters also include ranges for overhead line conductor cutting applications - ABC (Aerial Bundled Conductor), AAAC (All Aluminium Alloy Conductor), ASCR (Aluminium Conductor Steel Reinforced) and copper overhead lines.
Cable cutters suit up to 4 core 400sqmm XLPE/SWA BS5467 cables, lead covered sheathed cables and all high voltage power cables including Triplex.
Cembre Hydraulic Cable Cutters
Cembre Hydraulic Cable Cutters and Cable Cutting Tools - Features :
Hand operated Cembre hydraulic cutter tools designed to cut copper, aluminium and telecommunications cables, up to 85mm diameters
Double speed Cembre cable cutting action : a fast advancing speed for rapid approach of the blades to the cable and a slower more powerful speed for cable cutting
Cembre cable cutting blades are made from high strength special steel, heat trated to ensure a long service life
Cembre hydraulic cable cutting tool heads can be easily opened to allow the cutting of running cables
Cembe hydraulic cable cutting tools can be rotated through 90, 180 and 320 degrees to allow the cable jointer or electrical engineer to cut cables in the most accessible position
The goal is to achieve the Six Sigma quality level for the entire range of spinning machinery components at TeraSpin. Constant product innovation is now a part of the work culture at TeraSpin. We are pleased to bring you the September 2015 issue of ‘All about TeraSpin’.
In which process yarn is conditioned for better performance (such as strength, serviceability, luster, handle etc) is called yarn conditioning. Textile fibers are subjected to various physical operations to make in to a yarn. For example cotton fiber passes through opening, carding, drawing and spinning to become a yarn. During these phases the original moisture content on the fiber would have been lost and some static electricity would be carried by the fiber. The amount of static current carried by yarn changes from fiber to fiber. Similarly the strength of any fiber depends up on how close the present moisture content is to the original natural value.
Among a series of coordinated operations involved in making an electrical connection, cable cutting, and stripping are the initial and important preparation steps.
Proper preparation ensures high-quality connections. Our tools are in your good hands.
The first step, cutting. The cable must be cut cleanly, straightly without great effort. IWISS with its sub-brand iCrimp offers a variety of cutters to cover a range from thin fine-wire conductor to large diameter power supply cables. The cutters achieve the basic requirements of a quality cutting tool, for example:
*Made of premium steel, cutting edges stay sharp with no fraying.
*Ergonomic handle design brings a comfortable operation
*Ratcheting mechanism makes large size cable cutting effortless
The second step, stripping, the proper removal of the sheath brings high quality conductive connections. The cable must be stripped to the proper length without damages. Stripping can be super easy and fast when you get a suitable stripper. Our tools are designed to make it easy to get quick and clean stripping for cables of different sizes and materials. There is two basic strippers for your choice:
1. Stripping pliers with multiple stripping holes. Sharp blades and precise design in diameter provide a clean strip without damage to the conductor.
2. Self-adjusting insulation strippers are ideal for cable in different materials. The stripping depth can be adjusted according to cable diameter, and sheath thickness. It reduces the risk of damage to the conductor.
Besides, we manufactured various versatile strippers to help people to get more work done at less cost.
Description:
The 6NPM is a very high efficiency, (101.8 dB 1watt / 1 meter) 6-inch midrange speaker with incredibly linear frequency response characteristics and ultra low harmonic distortion artifacts. The 6NPM has extremely high sound quality. The 6NPM uses a lightweight paper pulp, specifically developed for this application. This unique cone provides the ideal weight to strength ratio.
At the core of the 6NPM is it’s voice coil technology featuring edge wounded aluminum ribbon wire. Unique lightweight and very short former provides the ideal transfer of power between the voice coil and the cone assembly and assists in reducing the distortion artifacts. By combining this material with the state of the art adhesives, the 6FPM delivers incredible performance. The magnetic circuit design is optimized to generate the minimum amount of flux modulation, providing exceptional stability. The neodymium magnet is in a direct contact with the CNC exposed aluminum section of the basket, hold in place by our thermal transfer adhesives. This design dramatically improves the heat transfer. The 6NPM is ideal for use in both sealed and vented enclosure designs. The most suitable applications are in high quality professional audio, as line array systems, 3-way designs, where extreme SPL outputs are desired. The 6NPM can be horn loaded or used in directly radiated midrange applications.
This tape is a self amalgamating, low voltage rubber tape which meets the requirements of ASTM-D4388, Type I. It easily conforms to irregular shapes and sufaces yielding a void free, electrically stable build up. Compatible with all extruded dielectric cable insulation.
Cembre Cable Cutters & Cutting Tools - UK Distributor
Manual, Ratchet, Hydraulic, Battery Cable Cutting Tools
Cembre cable cutters are ideal for cutting low and high voltage power, control and instrumentation cablesincluding steel wire armoured (SWA) cables.
Cembre hydraulic cable cutters also include ranges for overhead line conductor cutting applications - ABC (Aerial Bundled Conductor), AAAC (All Aluminium Alloy Conductor), ASCR (Aluminium Conductor Steel Reinforced) and copper overhead lines.
Cable cutters suit up to 4 core 400sqmm XLPE/SWA BS5467 cables, lead covered sheathed cables and all high voltage power cables including Triplex.
Cembre Hydraulic Cable Cutters
Cembre Hydraulic Cable Cutters and Cable Cutting Tools - Features :
Hand operated Cembre hydraulic cutter tools designed to cut copper, aluminium and telecommunications cables, up to 85mm diameters
Double speed Cembre cable cutting action : a fast advancing speed for rapid approach of the blades to the cable and a slower more powerful speed for cable cutting
Cembre cable cutting blades are made from high strength special steel, heat trated to ensure a long service life
Cembre hydraulic cable cutting tool heads can be easily opened to allow the cutting of running cables
Cembe hydraulic cable cutting tools can be rotated through 90, 180 and 320 degrees to allow the cable jointer or electrical engineer to cut cables in the most accessible position
The goal is to achieve the Six Sigma quality level for the entire range of spinning machinery components at TeraSpin. Constant product innovation is now a part of the work culture at TeraSpin. We are pleased to bring you the September 2015 issue of ‘All about TeraSpin’.
In which process yarn is conditioned for better performance (such as strength, serviceability, luster, handle etc) is called yarn conditioning. Textile fibers are subjected to various physical operations to make in to a yarn. For example cotton fiber passes through opening, carding, drawing and spinning to become a yarn. During these phases the original moisture content on the fiber would have been lost and some static electricity would be carried by the fiber. The amount of static current carried by yarn changes from fiber to fiber. Similarly the strength of any fiber depends up on how close the present moisture content is to the original natural value.
Among a series of coordinated operations involved in making an electrical connection, cable cutting, and stripping are the initial and important preparation steps.
Proper preparation ensures high-quality connections. Our tools are in your good hands.
The first step, cutting. The cable must be cut cleanly, straightly without great effort. IWISS with its sub-brand iCrimp offers a variety of cutters to cover a range from thin fine-wire conductor to large diameter power supply cables. The cutters achieve the basic requirements of a quality cutting tool, for example:
*Made of premium steel, cutting edges stay sharp with no fraying.
*Ergonomic handle design brings a comfortable operation
*Ratcheting mechanism makes large size cable cutting effortless
The second step, stripping, the proper removal of the sheath brings high quality conductive connections. The cable must be stripped to the proper length without damages. Stripping can be super easy and fast when you get a suitable stripper. Our tools are designed to make it easy to get quick and clean stripping for cables of different sizes and materials. There is two basic strippers for your choice:
1. Stripping pliers with multiple stripping holes. Sharp blades and precise design in diameter provide a clean strip without damage to the conductor.
2. Self-adjusting insulation strippers are ideal for cable in different materials. The stripping depth can be adjusted according to cable diameter, and sheath thickness. It reduces the risk of damage to the conductor.
Besides, we manufactured various versatile strippers to help people to get more work done at less cost.
Our target is, to become a global company that provides standard solutions to the problems in the industry, invest primarily on R&D and innovation, and create value for our customers and employees.
The Nexans Utility Tool Kit Case 82320 contains all the necessary tools needed to prepare both bonded and peelable semi-conductive screened cores. The tools have been selected to ensure the preparation of medium voltage power cables can be easily undertaken. Nexans 82320 kit is supplied in a heard wearing, foam filled case, protecting the contents from damage.
Nexans 82320 Utility Tool Kit Case includes the following:
WS64 Adjustable Cable Stripper
QC1 Quick Clamp
WS76 Semi-Con Shaving Tool
SCS Semi-Con Scoring Tool
GBKG05-05 Chamfering Tool
Nexans 82320 Utility Tool Kit Case Features:
Weight of complete kit: 4.8kg
Length: 44cm Height: 31cm Width: 11cm
* The individual tools can be ordered separately.
Ripley Utility Tool cable preparation tools are used to splice and terminate cable for the Power Transmission and Distribution, electrical construction and maintenance industries. All tools are designed and manufactured to meet specific cable application needs, including accurate removal of insulation, semi-conductive sheathing, protective jacketing and other materials to produce consistent, uniform preparation of cable ends for splicing and termination.
This report discusses about different types of tools that are required for cutting stones.
This is a study project that was done in 5th semester of B.Tech. for subject Manufacturing Process and Metallurgy.
Isolation Procedures for Safe Working on Electrical Systems and Equipment by the JIB | solation Procedures for Safe Working on Electrical Systems and Equipment
This chart shows the safe isolation procedure that you should use when working on electrical systems and equipment.
You'll receive a printed copy of this from your Training Provider, but it's also here as a handy reference to keep electronically.
THE RULES OF SAFE ISOLATION ARE:
Obtain permission to start work (a Permit may be required in some situations)
Identify the source(s) of supply using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Isolate the supply(s)
Secure the isolation
Prove the system/equipment is DEAD using an approved voltage indicator or test lamp
Prove that the approved voltage indicator or test lamp is functioning correctly
Put up warning signs to tell other people that the electrical installation has been isolated
Once the system/equipment is proved DEAD, work can begin
Uploaded by THORNE & DERRICK LV HV Jointing, Earthing, Substation & Electrical Eqpt | Explosive Atmosphere Experts & ATEX IECEx.
THORNE & DERRICK based in the UK are international distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment.
Since 1985, T&D have established an international reputation based on SERVICE | INTEGRITY | TRUST.
Contact us for 3M, ABB, Alroc, AN Wallis, CATU, Cembre, Centriforce, CMP, CSD, Elastimold, Ellis Patents, Emtelle, Euromold, Filoform , Furse, Lucy Electric & Zodion, Nexans, Pfisterer, Polypipe, Prysmian, Roxtec, Sicame, WT Henley.
JMeter webinar - integration with InfluxDB and GrafanaRTTS
Watch this recorded webinar about real-time monitoring of application performance. See how to integrate Apache JMeter, the open-source leader in performance testing, with InfluxDB, the open-source time-series database, and Grafana, the open-source analytics and visualization application.
In this webinar, we will review the benefits of leveraging InfluxDB and Grafana when executing load tests and demonstrate how these tools are used to visualize performance metrics.
Length: 30 minutes
Session Overview
-------------------------------------------
During this webinar, we will cover the following topics while demonstrating the integrations of JMeter, InfluxDB and Grafana:
- What out-of-the-box solutions are available for real-time monitoring JMeter tests?
- What are the benefits of integrating InfluxDB and Grafana into the load testing stack?
- Which features are provided by Grafana?
- Demonstration of InfluxDB and Grafana using a practice web application
To view the webinar recording, go to:
https://www.rttsweb.com/jmeter-integration-webinar
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
UiPath Test Automation using UiPath Test Suite series, part 3DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 3. In this session, we will cover desktop automation along with UI automation.
Topics covered:
UI automation Introduction,
UI automation Sample
Desktop automation flow
Pradeep Chinnala, Senior Consultant Automation Developer @WonderBotz and UiPath MVP
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Generating a custom Ruby SDK for your web service or Rails API using Smithyg2nightmarescribd
Have you ever wanted a Ruby client API to communicate with your web service? Smithy is a protocol-agnostic language for defining services and SDKs. Smithy Ruby is an implementation of Smithy that generates a Ruby SDK using a Smithy model. In this talk, we will explore Smithy and Smithy Ruby to learn how to generate custom feature-rich SDKs that can communicate with any web service, such as a Rails JSON API.
Connector Corner: Automate dynamic content and events by pushing a buttonDianaGray10
Here is something new! In our next Connector Corner webinar, we will demonstrate how you can use a single workflow to:
Create a campaign using Mailchimp with merge tags/fields
Send an interactive Slack channel message (using buttons)
Have the message received by managers and peers along with a test email for review
But there’s more:
In a second workflow supporting the same use case, you’ll see:
Your campaign sent to target colleagues for approval
If the “Approve” button is clicked, a Jira/Zendesk ticket is created for the marketing design team
But—if the “Reject” button is pushed, colleagues will be alerted via Slack message
Join us to learn more about this new, human-in-the-loop capability, brought to you by Integration Service connectors.
And...
Speakers:
Akshay Agnihotri, Product Manager
Charlie Greenberg, Host
1. ELECTRIC UTILITY
DISTRIBUTION / TRANSMISSION
Phone: 860-635-2200 U157
• Cable stripper for outer
jackets insulation on
large diameter cables
• Heavy duty construction for
industrial environments
• “Tri-Action Strip” capability
– Rotary cut to a longitudinal cut along
the cable length for end stripping
– Spiral cut for end stripping
– Spiral cut for mid-span stripping
• Spiral cutting feature provides easier removal of soft jackets
and on larger cables
• Adjustable blade up to 0.20 inches (5 mm) depth
• Blade depth setting can be locked to assure consistent
repetitive operations
• Roller support of cable for smooth stripping action
• Wheel blade applications available – contact customer
service for sizes and applications
• Replacement Fixed Blade Assembly – 39379
• Replacement Fixed Blade Cartridges (FC2) - 39377
(FC3) - 39378
• Weight: 1.5 lbs (680 g)
• Size: 3.7 x 1.7 (head) x 9.8 inches (95 x 42 x 250 mm)
MK04
Cable Jacket Stripper
Model Cable Size Range Cable Size Range Part No.
Inches O.D. mm O.D.
MK04 0.79” to 2.36” 20 to 60 39376
• Designed for precision
stripping of variety of
insulation types including
rubber, PVC, nylon and cotton
• Also recommended for cutting copper
screening of coaxial cables from 0.31 to
0.98 inches (8 to 25 mm) O.D.
• Adjustable blade depth up to 0.18 inches (4.5 mm) depth
• Stripping action is both circumferential, then longitudinal for
removal of insulation section at the end or mid span of wires
• Blade depth setting can be locked to assure consistent
repetitive operations
• Roller support of cable for smooth stripping action
• Replacement Blade - 39381
• Weight - 6.3 oz (180 g)
• Dimensions - 6.7 x 1.6 x 1.1 inches (170 x 40 x 27 mm)
MK01A
Outer Jacket Cable Stripper
Application Wire Size, Inches O.D. Wire Size, mm O.D. Part No.
Wire Stripping 0.31” to 0.98” 8 mm to 25 mm 39380
SECONDARYDIST.PRIMARYDIST.(OH)PRIMARYDIST.(URD)SPECIALITYDIST.TRANSMISSION
WWW.CABLEJOINTS.CO.UK
THORNE DERRICK UK
TEL 0044 191 490 1547 FAX 0044 477 5371
TEL 0044 117 977 4647 FAX 0044 977 5582
WWW.THORNEANDDERRICK.CO.UK