This document provides information on a MEZ-VOLUME DAMPER-KIT JK-A-07 G volume damper kit, including specifications for its galvanized steel blade, temperature resistance, fin spacing, and list of included parts with descriptions and weights. Assembly guidelines are also given for installing toothed wheels and actuators, laying out the blade, and determining overall dimensions. A diagram shows the maximum breadth needed and pressure loss curves for different opening percentages of the valve blade.
The document describes a MEZ-VOLUME DAMPER-KIT JK-A-07 aluminum volume damper kit. The kit contains an aluminum blade with rubber seals, a toothed wheel outside for operation, and various other plastic and metal parts. Installation guidelines are provided regarding attaching toothed wheels on both sides, fastening bolts, required connecting rods, blade layout, and overall dimensions. A diagram shows the maximum pressure loss at different volume flow rates when the blades are fully or partially open.
The document discusses a volume damper kit, including:
1) The kit contains various aluminum, plastic, rubber, and galvanized steel parts for assembling dampers.
2) Dimensions, materials, quantities, and weights are provided for each part number.
3) Installation guidelines discuss installing toothed wheels, actuators, blade layout, and overall dimensions. Maximum breadth depends on pressure difference.
The document discusses a volume damper kit for regulating air flow. It includes aluminum blades with rubber seals, a toothed wheel inside to keep it air tight, and temperature resistance from -20°C to 80°C. It lists the various parts included like blades, wheels, bearings and covers made from materials like aluminum, plastic, steel and rubber. Dimensions, packaging and weights are provided. Installation guidelines discuss installing toothed wheels on both sides and using a connecting rod for actuators above 1200mm height. It also provides a diagram showing maximum blade breadth in relation to pressure loss.
This document describes MEZ-SYPHON-FLANGE duct sealing systems that comply with DIN 24194 part 1 standards. It includes details on MEZ-SYPHON-FLANGE systems with an integrated siphon that provide a higher degree of tightness. It also describes MEZ-CORNER duct corners for attachment to duct walls, with sealing either on the inside or front side, available in galvanized steel or stainless steel in various sizes and configurations.
This document discusses different types of couplings used to join rotating shafts, including rigid couplings, flexible couplings, and muff couplings. It provides details on the construction and working of bush-pin flexible couplings and clamp couplings. Bush-pin flexible couplings can tolerate some misalignment of the shafts and absorb vibrations. Their design involves calculating the diameter of pins and bushes based on the torque transmitted and permissible stress values. Clamp couplings are easier to assemble and disassemble compared to rigid muff couplings, but are more difficult to balance at high speeds and unsuitable for shock loads.
This document presents information on a bushed pin type flexible coupling. It begins with an overview of couplings and their purpose in connecting shafts to transfer motion. It then discusses different types of couplings, including rigid and flexible couplings. The main focus is on the design of a bushed pin type flange coupling, including the dimensions and considerations for designing the hub, key, flange, and bolts. Advantages of this type of coupling include being torsionally stiff with good vibration damping, while limitations include sensitivity to chemicals and difficulty in balancing. References used in the presentation are also listed.
The CM8 is a 3-way speaker system utilizing a Nautilus tube-loaded tweeter, Kevlar midrange driver, and two bass drivers. It has a frequency response of 69Hz to 22kHz and can handle amplifier power between 30W to 150W. The slimmer CM8 has dimensions of 960mm height, 165mm width, and 277mm depth.
This document provides a catalogue of solar panel mounting hardware parts. It lists various types of rails, clamps, brackets and other components used to install solar panels on rooftops. The rails come in different lengths to accommodate different numbers and sizes of solar panels. Brackets are designed to attach to specific metal roofing profiles without penetrating the roof. Adjustable clamps secure panels of varying thickness to the rails.
The document describes a MEZ-VOLUME DAMPER-KIT JK-A-07 aluminum volume damper kit. The kit contains an aluminum blade with rubber seals, a toothed wheel outside for operation, and various other plastic and metal parts. Installation guidelines are provided regarding attaching toothed wheels on both sides, fastening bolts, required connecting rods, blade layout, and overall dimensions. A diagram shows the maximum pressure loss at different volume flow rates when the blades are fully or partially open.
The document discusses a volume damper kit, including:
1) The kit contains various aluminum, plastic, rubber, and galvanized steel parts for assembling dampers.
2) Dimensions, materials, quantities, and weights are provided for each part number.
3) Installation guidelines discuss installing toothed wheels, actuators, blade layout, and overall dimensions. Maximum breadth depends on pressure difference.
The document discusses a volume damper kit for regulating air flow. It includes aluminum blades with rubber seals, a toothed wheel inside to keep it air tight, and temperature resistance from -20°C to 80°C. It lists the various parts included like blades, wheels, bearings and covers made from materials like aluminum, plastic, steel and rubber. Dimensions, packaging and weights are provided. Installation guidelines discuss installing toothed wheels on both sides and using a connecting rod for actuators above 1200mm height. It also provides a diagram showing maximum blade breadth in relation to pressure loss.
This document describes MEZ-SYPHON-FLANGE duct sealing systems that comply with DIN 24194 part 1 standards. It includes details on MEZ-SYPHON-FLANGE systems with an integrated siphon that provide a higher degree of tightness. It also describes MEZ-CORNER duct corners for attachment to duct walls, with sealing either on the inside or front side, available in galvanized steel or stainless steel in various sizes and configurations.
This document discusses different types of couplings used to join rotating shafts, including rigid couplings, flexible couplings, and muff couplings. It provides details on the construction and working of bush-pin flexible couplings and clamp couplings. Bush-pin flexible couplings can tolerate some misalignment of the shafts and absorb vibrations. Their design involves calculating the diameter of pins and bushes based on the torque transmitted and permissible stress values. Clamp couplings are easier to assemble and disassemble compared to rigid muff couplings, but are more difficult to balance at high speeds and unsuitable for shock loads.
This document presents information on a bushed pin type flexible coupling. It begins with an overview of couplings and their purpose in connecting shafts to transfer motion. It then discusses different types of couplings, including rigid and flexible couplings. The main focus is on the design of a bushed pin type flange coupling, including the dimensions and considerations for designing the hub, key, flange, and bolts. Advantages of this type of coupling include being torsionally stiff with good vibration damping, while limitations include sensitivity to chemicals and difficulty in balancing. References used in the presentation are also listed.
The CM8 is a 3-way speaker system utilizing a Nautilus tube-loaded tweeter, Kevlar midrange driver, and two bass drivers. It has a frequency response of 69Hz to 22kHz and can handle amplifier power between 30W to 150W. The slimmer CM8 has dimensions of 960mm height, 165mm width, and 277mm depth.
This document provides a catalogue of solar panel mounting hardware parts. It lists various types of rails, clamps, brackets and other components used to install solar panels on rooftops. The rails come in different lengths to accommodate different numbers and sizes of solar panels. Brackets are designed to attach to specific metal roofing profiles without penetrating the roof. Adjustable clamps secure panels of varying thickness to the rails.
The document describes a volume damper kit containing various parts for regulating air flow. It includes a steel sheeted blade without a valve seal, that is temperature resistant from -20°C to 80°C. It also lists the various components of the kit along with their materials, dimensions, packaging quantities, and weights. Installation instructions are provided regarding affixing toothed wheels, connecting rods, and bolting the drive axle to the blade. Diagrams show the maximum blade width based on pressure difference and the pressure loss curve and motor torque.
The document discusses a volume damper kit for regulating air flow. It includes steel-sheeted blades, toothed wheels, axles, corners, covers, and side sections made of various materials. Dimensions and weights of parts are provided. Guidelines cover installing toothed wheels on single or both sides, connecting rods, and maximum blade widths depending on pressure loss.
The document describes a MEZ-volume damper kit for regulating air flow. It includes aluminum blades, plastic and steel parts, and rubber seals. It lists the various components of the kit along with material types, dimensions, packaging quantities, and weights. Installation guidelines are provided for configuring the toothed wheels and actuators based on the height and connecting rods if the height exceeds 1300mm. Diagrams show the relationship between blade width and pressure loss.
The document discusses a volume damper kit for regulating air flow. It includes aluminum blades without seals, with a temperature resistance of -20°C to 80°C and fin spacing of 100mm. It also lists the various materials, dimensions, quantities and weights of the components available. Guidelines are provided for installing toothed wheels and actuators, as well as blade layout. Charts show the maximum blade width for given pressure losses and the torque diagram for actuators.
The document describes MEZ-HIGH PRESSURE-VOLUME DAMPER VALVES including a MEZ-HIGH PRESSURE-VOLUME DAMPER VALVE that has an aluminum blade with a temperature resistance of -20°C to +80°C and a fin spacing of 80mm. It also lists various parts for high pressure volume dampers including aluminum blades, compression seals, valve blade absorbers, side sections, corners, and provides workmanship guidelines for blade layout and overall dimensions.
The document provides information on precision lead screws and SupernutsTM. It discusses features such as low cost, variety of sizes available, corrosion resistance, lubrication options, load capacity, temperature limits, and efficiency. Precision lead screws can be an economical solution for moderate to light load linear motion applications. Standard plastic nuts are available, as well as custom designs and bronze nut options for higher loads.
Thomson BSA Integral Flange Mount Supernuts MTS Electromate
The document provides information on precision lead screws and SupernutsTM. It discusses features such as low cost, variety of sizes available, corrosion resistance, lubrication options, load capacity, temperature limits, and efficiency. Precision lead screws can be an economical solution for moderate to light load linear motion applications. Standard plastic nuts are available, as well as custom designs and bronze nut options for higher loads.
This document provides a summary of a seminar on V-belts and drives. It discusses different types of V-belts like raw edge cogged belts, poly-V belts, space saver wedge belts and their advantages. It also covers topics like belt construction, tensioning, causes of belt failure and remedies. Standard dimensions for V-grooved pulleys are presented. The benefits of wedge belt drives over conventional V-belt drives are highlighted, including lower cost and longer belt life.
1. The document describes the MEZ-SYPHON-FLANGE system for ductwork which complies with DIN 24194/part 1 standards.
2. It includes a syphon flange with an injected sealing compound to create a tight seal, and corners for attaching to duct walls with sealing on the inside or front.
3. Technical specifications and part numbers are provided for galvanized steel and stainless steel syphon flanges and corners of various designs.
The document describes the AFT Supernut, which is designed for light load applications up to 10 pounds. It offers smooth movement and low drag torque. The AFT anti-backlash collar automatically adjusts for wear over the life of the nut. It provides dimensions and part numbers for various diameters of the AFT Supernut.
Thomson anti backlash_ supernuts_specsheetElectromate
The document describes the AFT Supernut, which is designed for light load applications up to 10 pounds. It offers smooth movement and low drag torque. The AFT anti-backlash collar automatically adjusts for wear over the life of the nut. It provides dimensions and part numbers for various diameters of the AFT Supernut.
The document provides technical specifications for the BMW Z4 model, including dimensions, engine, transmission, performance, fuel consumption and emissions data. Key specifications highlighted are a 6-cylinder engine with outputs between 150-225kW, 6-speed manual or optional automatic transmission, acceleration from 0-62mph in 5.2 to 6.6 seconds depending on the model, and fuel consumption between 30.1 to 45.6 mpg. Safety features include ABS, DSC and airbags.
Limits and fits (machine design & industrial drafting )Digvijaysinh Gohil
This document discusses limits, fits, and systems of fits in machine design and industrial drafting. It defines limits as the maximum and minimum permissible sizes of a given dimension. It describes fits as the type of assembly that results from the difference in size between a hole and shaft before assembly. The main types of fits are defined as clearance fit, interference fit, and transition fit. Finally, it explains hole basis and shaft basis systems, which determine fits based on tolerances associated with the hole or shaft size, respectively.
Asahitec Stencils Solder pallets, in the past, have been a Production Supervisor’s nightmare keeping up with all the hardware and handling issues associated with adjustable wave pallets.
1) Daewha Alloytech introduces their line of small and large down-the-hole hammers and bits for various drilling applications including underground development, geothermal, and construction.
2) Specifications are provided for hammer sizes and models from 3.5" to 40" outlining dimensions, weights, air consumption requirements, and compatible bit sizes.
3) Auger hammers and ring bits are also described along with their uses for collapsing layers of earth, sand, and gravel.
4) Cluster drills are highlighted for their ability to reduce noise, vibration and dust during drilling operations.
This document provides guidelines for suspending ducts with cross-beams including:
1) Dimensions and load capacity for different cross-beam profiles.
2) Guidelines on distance and type of duct support depending on whether the area is walkable.
3) Technical details such as moment of inertia for different cross-beam profiles.
4) Accessories including square plugs and sound insulation profiles for assembling duct mounting rails.
This document provides specifications for several wall-mounted air conditioning models, including the FXAQ20MAVE, FXAQ25MAVE, and FXAQ32MAVE. It lists technical details such as cooling capacity, dimensions, fan specs, piping details, and sound levels for each model. It also provides notes on testing conditions and conversion formulas.
This document provides specifications for the Sachtler FSB 4 camera stabilizing fluid head. It can support payloads from 0-4 kg and has damping controls with 5 settings. It has a tilt range of +90 to -70 degrees and is compatible with tripods that have 75 mm bowls. Additional details are given on center of gravity height limits and accessories that are compatible with the FSB 4 system.
JGB Enterprises is proud to present Eaglecrete Concrete Placement hoses and accessories. These material handling hoses and accessories are designed and manufactured to stand up to the most abrasive applications, and materials from sand, shot, dry cement, gravel, seed, lime, animal feed, and even mild chemicals, agricultural sprays, and hot air. JGB's Eaglecrete® Concrete Pumping Hose comes in 1233 or 1300 psi working pressures. It is constructed with a black conductive natural rubber tube and NR/NBR blend cover. The Eaglecrete® 1233 is reinforced with spiral textile while the Eaglecrete® 1300 is reinforced with a spiral wire. Heavy-Duty, Victaulic, NPT and Metric coupling configurations are available with this hose. JGB Enterprises Eagle FlexCrete is a new alternative in the concrete placement industry. The Eagle FlexCrete answers an industry need for a concrete placement hose that handles easily while placing ICF forms as well as tall walls and columns where space is limited. The Eagle FlexCrete’s lay flat construction allows better flow control & lower placement rates than standard boom tip hoses. Contact our Sales Department for more Info at 315-451-2770
The document describes a volume damper kit containing various parts for regulating air flow. It includes a steel sheeted blade without a valve seal, that is temperature resistant from -20°C to 80°C. It also lists the various components of the kit along with their materials, dimensions, packaging quantities, and weights. Installation instructions are provided regarding affixing toothed wheels, connecting rods, and bolting the drive axle to the blade. Diagrams show the maximum blade width based on pressure difference and the pressure loss curve and motor torque.
The document discusses a volume damper kit for regulating air flow. It includes steel-sheeted blades, toothed wheels, axles, corners, covers, and side sections made of various materials. Dimensions and weights of parts are provided. Guidelines cover installing toothed wheels on single or both sides, connecting rods, and maximum blade widths depending on pressure loss.
The document describes a MEZ-volume damper kit for regulating air flow. It includes aluminum blades, plastic and steel parts, and rubber seals. It lists the various components of the kit along with material types, dimensions, packaging quantities, and weights. Installation guidelines are provided for configuring the toothed wheels and actuators based on the height and connecting rods if the height exceeds 1300mm. Diagrams show the relationship between blade width and pressure loss.
The document discusses a volume damper kit for regulating air flow. It includes aluminum blades without seals, with a temperature resistance of -20°C to 80°C and fin spacing of 100mm. It also lists the various materials, dimensions, quantities and weights of the components available. Guidelines are provided for installing toothed wheels and actuators, as well as blade layout. Charts show the maximum blade width for given pressure losses and the torque diagram for actuators.
The document describes MEZ-HIGH PRESSURE-VOLUME DAMPER VALVES including a MEZ-HIGH PRESSURE-VOLUME DAMPER VALVE that has an aluminum blade with a temperature resistance of -20°C to +80°C and a fin spacing of 80mm. It also lists various parts for high pressure volume dampers including aluminum blades, compression seals, valve blade absorbers, side sections, corners, and provides workmanship guidelines for blade layout and overall dimensions.
The document provides information on precision lead screws and SupernutsTM. It discusses features such as low cost, variety of sizes available, corrosion resistance, lubrication options, load capacity, temperature limits, and efficiency. Precision lead screws can be an economical solution for moderate to light load linear motion applications. Standard plastic nuts are available, as well as custom designs and bronze nut options for higher loads.
Thomson BSA Integral Flange Mount Supernuts MTS Electromate
The document provides information on precision lead screws and SupernutsTM. It discusses features such as low cost, variety of sizes available, corrosion resistance, lubrication options, load capacity, temperature limits, and efficiency. Precision lead screws can be an economical solution for moderate to light load linear motion applications. Standard plastic nuts are available, as well as custom designs and bronze nut options for higher loads.
This document provides a summary of a seminar on V-belts and drives. It discusses different types of V-belts like raw edge cogged belts, poly-V belts, space saver wedge belts and their advantages. It also covers topics like belt construction, tensioning, causes of belt failure and remedies. Standard dimensions for V-grooved pulleys are presented. The benefits of wedge belt drives over conventional V-belt drives are highlighted, including lower cost and longer belt life.
1. The document describes the MEZ-SYPHON-FLANGE system for ductwork which complies with DIN 24194/part 1 standards.
2. It includes a syphon flange with an injected sealing compound to create a tight seal, and corners for attaching to duct walls with sealing on the inside or front.
3. Technical specifications and part numbers are provided for galvanized steel and stainless steel syphon flanges and corners of various designs.
The document describes the AFT Supernut, which is designed for light load applications up to 10 pounds. It offers smooth movement and low drag torque. The AFT anti-backlash collar automatically adjusts for wear over the life of the nut. It provides dimensions and part numbers for various diameters of the AFT Supernut.
Thomson anti backlash_ supernuts_specsheetElectromate
The document describes the AFT Supernut, which is designed for light load applications up to 10 pounds. It offers smooth movement and low drag torque. The AFT anti-backlash collar automatically adjusts for wear over the life of the nut. It provides dimensions and part numbers for various diameters of the AFT Supernut.
The document provides technical specifications for the BMW Z4 model, including dimensions, engine, transmission, performance, fuel consumption and emissions data. Key specifications highlighted are a 6-cylinder engine with outputs between 150-225kW, 6-speed manual or optional automatic transmission, acceleration from 0-62mph in 5.2 to 6.6 seconds depending on the model, and fuel consumption between 30.1 to 45.6 mpg. Safety features include ABS, DSC and airbags.
Limits and fits (machine design & industrial drafting )Digvijaysinh Gohil
This document discusses limits, fits, and systems of fits in machine design and industrial drafting. It defines limits as the maximum and minimum permissible sizes of a given dimension. It describes fits as the type of assembly that results from the difference in size between a hole and shaft before assembly. The main types of fits are defined as clearance fit, interference fit, and transition fit. Finally, it explains hole basis and shaft basis systems, which determine fits based on tolerances associated with the hole or shaft size, respectively.
Asahitec Stencils Solder pallets, in the past, have been a Production Supervisor’s nightmare keeping up with all the hardware and handling issues associated with adjustable wave pallets.
1) Daewha Alloytech introduces their line of small and large down-the-hole hammers and bits for various drilling applications including underground development, geothermal, and construction.
2) Specifications are provided for hammer sizes and models from 3.5" to 40" outlining dimensions, weights, air consumption requirements, and compatible bit sizes.
3) Auger hammers and ring bits are also described along with their uses for collapsing layers of earth, sand, and gravel.
4) Cluster drills are highlighted for their ability to reduce noise, vibration and dust during drilling operations.
This document provides guidelines for suspending ducts with cross-beams including:
1) Dimensions and load capacity for different cross-beam profiles.
2) Guidelines on distance and type of duct support depending on whether the area is walkable.
3) Technical details such as moment of inertia for different cross-beam profiles.
4) Accessories including square plugs and sound insulation profiles for assembling duct mounting rails.
This document provides specifications for several wall-mounted air conditioning models, including the FXAQ20MAVE, FXAQ25MAVE, and FXAQ32MAVE. It lists technical details such as cooling capacity, dimensions, fan specs, piping details, and sound levels for each model. It also provides notes on testing conditions and conversion formulas.
This document provides specifications for the Sachtler FSB 4 camera stabilizing fluid head. It can support payloads from 0-4 kg and has damping controls with 5 settings. It has a tilt range of +90 to -70 degrees and is compatible with tripods that have 75 mm bowls. Additional details are given on center of gravity height limits and accessories that are compatible with the FSB 4 system.
JGB Enterprises is proud to present Eaglecrete Concrete Placement hoses and accessories. These material handling hoses and accessories are designed and manufactured to stand up to the most abrasive applications, and materials from sand, shot, dry cement, gravel, seed, lime, animal feed, and even mild chemicals, agricultural sprays, and hot air. JGB's Eaglecrete® Concrete Pumping Hose comes in 1233 or 1300 psi working pressures. It is constructed with a black conductive natural rubber tube and NR/NBR blend cover. The Eaglecrete® 1233 is reinforced with spiral textile while the Eaglecrete® 1300 is reinforced with a spiral wire. Heavy-Duty, Victaulic, NPT and Metric coupling configurations are available with this hose. JGB Enterprises Eagle FlexCrete is a new alternative in the concrete placement industry. The Eagle FlexCrete answers an industry need for a concrete placement hose that handles easily while placing ICF forms as well as tall walls and columns where space is limited. The Eagle FlexCrete’s lay flat construction allows better flow control & lower placement rates than standard boom tip hoses. Contact our Sales Department for more Info at 315-451-2770
Similar to 3.5.4 Mez Volume Damper Kit Jk A 07 G (20)
This document describes the MEZ-ZIP-CLIP, an innovative and cost-effective mounting system for air duct systems. The MEZ-ZIP-CLIP can be used to mount pipes, luminaries, cable baskets, and other equipment. It consists of wires and clips that are sold separately to reduce waste. The clips can be assembled and disassembled without tools, and are made of galvanized steel or stainless steel to support different service loads between 10 to 250 kg. Custom versions are also available upon request.
This document discusses products for improving air duct systems, specifically the MEZ-Parallel Coupler. The coupler is an assembling element that allows for quick height regulation or adjustment of threaded rods or grub screws. It provides quick extensions for direct suspensions and seamless elevation adjustment. The coupler is available in steel for M8 or M10 threads in lengths of 35mm and is priced between 38-50 euros per 100 units.
This document discusses products for better air duct systems, including MEZ-STICKER labels for labeling pipes in various sizes, colors, and prices. The labels are made from weatherproof PVC foil and can include individual text or corporate designs. A price scale is provided starting at 0.85 euros per label for orders of 100 pieces or more, decreasing to 0.50 euros per label for orders of 1,000 pieces or more.
This document is a product order form from MEZ-TECHNIK GmbH for mounting rails and accessories for better air duct systems. It lists various mounting rails, saddle flanges, brackets, carriers, mounting angles, track connectors, bails, and securing clamps available for purchase in quantities starting at 10 pieces up to 50 pieces per item. The order form requests contact information and specifies that net prices are in Euro and valid until revoked, with delivery from the company's location in Reutlingen, Germany.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Building RAG with self-deployed Milvus vector database and Snowpark Container...Zilliz
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Climate Impact of Software Testing at Nordic Testing DaysKari Kakkonen
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
UiPath Test Automation using UiPath Test Suite series, part 5DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 5. In this session, we will cover CI/CD with devops.
Topics covered:
CI/CD with in UiPath
End-to-end overview of CI/CD pipeline with Azure devops
Speaker:
Lyndsey Byblow, Test Suite Sales Engineer @ UiPath, Inc.
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Alt. GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using ...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
20240609 QFM020 Irresponsible AI Reading List May 2024
3.5.4 Mez Volume Damper Kit Jk A 07 G
1. 3.5 VOLUME DAMPER KIT
3.5
REGULATION OF AIR FLOW
3.5.4 MEZ-VOLUME DAMPER-KIT JK-A-07 G
Toothed wheel outside
- Galvanised steel-sheeted blade with valve blade seal
- Temperature resistance: -20°C till +80°C
- Fin spacing 165 mm
Art.-Nr. Product Material Dimensions VPE Weight
930/5 STEEL-SHEETED BLADE 165 Galv. steel 165 mm x 5 m 200 m 2,758 kg/m
934/1 VALVE BLADE SEAL Rubber 200 m 0,016 kg/m
937/2 END CAP for Blade Plastic 165 mm 0,046 kg/unit
931/4 TOOTHED WHEEL outside Plastic 165 mm 0,096 kg/unit
932/1 HEXAGONAL BEARING Plastic 100 units 0,001 kg/unit
932/4 AXLE long with PVC-Snap lock 100 units 0,009 kg/unit
933/2 FASTENING BOLT Aluminium 10 x 10 x 40 mm 100 units 0,122 kg/unit
933/3 DRIVE AXLE Steel 15 x 15 x 200 mm 50 units 0,122 kg/unit
933/5 SPRING CLAMP V2A 50 units 0,006 kg/unit
for Drive axle 15 x 15 mm
933/4 DUMMY PLUG for axle Plastic 100 units 0,001 kg/unit
for Drive axle 15 x 15 mm
All Rights Reserved
934/1 RUBBER CORNER PROFILE Rubber 10 m 0,027 kg/unit
936/3 SIDE SECTION – non-profiled Galv. steel, 1,25 mm 252 x 2500 mm 20 m 6,300 kg/unit
Hexagonal boring, distance 165 mm
935/3 MEZ-CORNER for frame profiles 30 mm Galv. steel 250 units 0,066 kg/unit
2. 3.5 VOLUME DAMPER KIT
3.5
REGULATION OF AIR FLOW
3.5.4 MEZ-VOLUME DAMPER-KIT JK-A-07 G
Toothed wheel outside
Workmanship Guidelines:
Toothed wheels:
- Volume damper valves are generally installed
with toothed wheels on both sides
- All axles are to be fastened using fastening bolts
lichte Höhe
hight
90
Actuator:
- Starting from a height of 1980 mm – a connecting
rod needs to be installed
Blade layout:
Clear width minus 11 mm width
lichte Breite
Overall dimensions:
The maximum breadth needed for the overall dimensions
can be taken from the diagram below C - P rofil
6
30
max. breadth of valve blade
180
Pressure loss (Pa)
valve blade dimension 180
Pressure loss Motor
Stellkraftdiagramm /
Druckverlustkennlinie (in geöffnetem Zustand)
Pressure loss (open valves) Motordrehmoment
H (m) 2,5
1000
900 2,0
Druckverlust [Pa]
800
Angle of blade
Pressure loss
700 30 Nm
1,5
600
500
400 1,0
300 20 Nm
D
200
0,5
100
0 12 Nm
2000 4500 7000 9500 12000 14500 17000
0
Volumenstrom in m³/h 0,5 1,0 1,5 2,0
B (m)
max. Öffnung 66% Öffnung 50% Öffnung 33% Öffnung
All Rights Reserved