1. 3.4 VOLUME DAMPER KIT
3.4
REGULATION OF AIR FLOW
3.4.2 MEZ-VOLUME DAMPER-KIT JK-A-02 B
Toothed wheel outside
- Steel sheeted blade without valve blade seal
- Temperature resistance: -20°C till +80°C
- Fin spacing 100 mm
Art.-Nr. Product Material Dimensions VPE Weight
930/6 STEEL-SHEETED BLADE 100 Galv. steel 100 mm x 5 m 200 m 1,093 kg/m
937/1 END CAP FOR BLADE Plastic 100 units 0,008 kg/unit
931/2 TOOTHED WHEEL outside Plastic 100 mm 100 units 0,028 kg/unit
(for steel sheet and aluminium blade)
932/1 HEXAGONAL BEARING Plastic 100 units 0,001 kg/unit
932/2 AXLE short (ingle-sided toothed wheel) Plastic 0,004 kg/unit
932/3 AXLE long Plastic 0,006 kg/unit
933/3 DRIVE AXLE Galv. steel 15 x 15 x 200 mm 50 units 0,122 kg/unit
934/1 RUBBER CORNER PROFILE Rubber 10 m 0,027 kg/m
936/10 COVER – profiled Galv. steel, 1,25 mm 20 x 120 mm x 5 m 50 m 1,594 kg/m
936/11 SIDE SECTION – profiled Galv. steel, 1,25 mm 30 x 120 mm x 2,5 m 50 m 1,500 kg/m
Hexagonal boring, distance 100 mm
936/40 COVER – profiled Galv. steel 30 x 120 mm x 5 m 50 m 1,780 kg/m
936/41 SIDE SECTION – profiled Galv. steel, 1,25 mm 30 x 120 mm x 2,5 m 50 m 1,700 kg/m
Hexagonal boring, distance 100 mm
935/2 MEZ-CORNER for frame profiles 20 mm Galv. steel 250 units 0,036 kg/unit
935/3 MEZ-CORNER for frame profiles 30 mm Galv. steel 250 units 0,066 kg/unit
SECOND OPTION
Art.-Nr. Product Material Dimensions VPE Weight
936/1 SIDE SECTION – non-profiled Galv. steel, 1,25 mm 175 x 2500 mm 020 m 4,400 kg/unit
Hexagonal boring, distance 100 mm
All Rights Reserved
936/4 SIDE SECTION – non-profiled Galv. steel, 1,5 mm 192 x 2500 mm 020 m 6,500 kg/unit
Hexagonal boring, distance 100 mm
935/2 MEZ-CORNER for frame profiles 20 mm Galv. steel 250 units 0,036 kg/unit
935/3 MEZ-CORNER for frame profiles 30 mm Galv. steel 250 units 0,066 kg/unit

2. 3.4 VOLUME DAMPER KIT
3.4
REGULATION OF AIR FLOW
3.4.2 MEZ-VOLUME DAMPER-KIT JK-A-02 B
Toothed wheel outside
Workmanship Guidelines:
Toothed wheels:
- Toothed wheels with a height till 1000 mm and a
maximum breadth of 800 mm can be affixed on a
single side
lichte Höhe
- Toothed wheels of all other dimensions 90
hight
need to be affixed on both sides
- For single-sided toothed wheels place axis and end
cap temporarily on the opposite side
- All axles are generally to be bolted using a self-drilling
screw or rivet.
width
Actuator: lichte Breite
- Starting from a height of 1200 mm – a connecting rod
needs to be installed
- The drive axle is to be bolted onto the blade C - P rofil
using a self-drilling screw or rivet 6
30
Blade layout: 120
Clear width minus 7 mm 6
20
Overall dimensions: 120
The maximum breadth needed for the overall dimensions
1
can be taken from the diagram below
120
maximale Klappenbreite blade
max. breadth of valve in Abhängigkeit von ∆P
2000
1750
Druckdifferenz [Pa]
1500
Pressure loss (Pa)
1250
1000
750
500
250
0 200 400 600 800 1000 1200 1400 1600 1800 2000
Jalousieklappenbreite
valve blade dimension
Pressure loss Motor
Pressure loss (open valves)(in geöffnetem Zustand) Stellkraftdiagramm /
Druckverlustkennlinie Motordrehmoment
H (m) 1,5
°
300
Klappenöffnungswinkel °
45
Pressure loss [Pa]
15 Nm
Angle of blade
Druckverlust
1,0
200
8 Nm
60°
All Rights Reserved
100 0,5
90°
1 2 3 4 5 0 0,5 1,0 1,5
W[m/s] B (m)
1