Lock Solar Product Catalogue

1. LOCK SOLAR CATALOGUE
21‐01‐15
IMAGE DESCRIPTION PART NO.
Low Profile Rail (2560mm long)
Low Profile Rail (3410mm long)
Low Profile Rail (3140mm long)
Low Profile Rail (4160mm long)
LOW‐PROFILE RAIL (for 250‐watt+ panels)
300‐003
This low profile, low weight, high strength rail is extruded in corrosion resistant
6060‐T6 Aluminium. It includes an integrated cable management tray, for the
location of the solar cables.
Ideally this rail length is used for installing 3 solar panels that are up to 1001mm
wide (typically 250‐300‐watt panels)
Rail length is 3140 mm (3.14 metres)
300‐004
This low profile, low weight, high strength rail is extruded in corrosion resistant
6060‐T6 Aluminium. It includes an integrated cable management tray, for the
location of the solar cables.
Ideally this rail length is used for installing 4 solar panels that are up to 1001mm
wide (typically 250‐300‐watt panels)
Rail length is 4160 mm (4.16 metres)
LOW‐PROFILE RAIL (for 190‐watt panels)
300‐006
This low profile, low weight, high strength rail is extruded in corrosion resistant
6060‐T6 Aluminium. It includes an integrated cable management tray, for the
location of the solar cables
Ideally this rail length is used for installing 3 solar panels that are up to 808mm
wide (typically 190‐watt panels)
Rail length is 2560 mm (2.56 metres)
300‐007
This low profile, low weight, high strength rail is extruded in corrosion resistant
6060‐T6 Aluminium. It includes an integrated cable management tray, for the
location of the solar cables.
Ideally this rail length is used for installing 4 solar panels that are up to 808mm
wide (typically 190‐watt panels)
Rail length is 3410 mm (3.41 metres)
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 1
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

2. Heavy Duty Rail (3140mm long)
Heavy Duty Rail (4160mm long)
HEAVY DUTY RAIL (for 250‐watt+ panels)
300‐001
This heavy duty, high strength rail is extruded in corrosion resistant 6060‐T6
Aluminium. It includes a dedicated channel in the rail to support the Lock Solar
twist cable ties (#109‐001), as well as an integrated cable management tray for
the location of the solar cables.
Ideally this rail length is used for installing 3 solar panels that are up to 1001mm
wide (typically 250‐300‐watt panels)
Rail length is 3140 mm (3.14 metres)
300‐002
This heavy duty, high strength rail is extruded in corrosion resistant 6060‐T6
Aluminium. It includes a dedicated channel in the rail to support the Lock Solar
twist cable ties (#109‐001), as well as an integrated cable management tray for
the location of the solar cables.
Ideally this rail length is used for installing 4 solar panels that are up to 1001mm
wide (typically 250‐300‐watt panels)
Rail length is 4160 mm (4.16 metres)
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 2
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

3. Rail Joiner
Adjustable Mid Clamp (31mm to 55mm height)
Adjustable End Clamp (31mm to 55mm height)
Rail‐to‐Bracket Connector
Cross‐bracing rail bracket
310‐001
The Cross‐bracing bracket is designed to join two rails together (lower rail and
upper rail pieces), at 90‐degrees.
This bracket is only used with advanced cross‐bracing installation methods,
where panels and roof battens do not align up.
This bracket requires 2x Rail‐to‐Bracket Connectors (#308‐001), which are not
included
302‐001
The Adjustable End‐Clamp accommodates different PV module frame heights
ranging from 31mm to 55mm, by simply changing the locking position of the
upper clamp piece.
Part includes: rail nut, 25mm M8 security‐head screw and washer.
*Also available in black anodised*
308‐001
This component is used to connect the rail pieces to the roof brackets.
This part is required and attached to, for every roof bracket used.
Part includes 25mm M8 security‐head screw, washer and rail nut
RAIL COMPONENTS
307‐001
The Rail Joiner allows rail pieces to be aligned and firmly locked together,
extending the length of a solar array.
Includes 2x 20mm M8 security‐head screws
*Also available in black anodised*
301‐001
The spring loaded Adjustable Mid‐Clamp accommodates different PV module
frame heights ranging from 31mm to 55mm, with the simple addition or
removal of its concealed spacer.
Part includes: rail nut, 60mm M8 security‐head screw, spring, spacer and
washer. *Also available in black anodised*
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 3
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

4. Klip‐Lok 700 Bracket (1 Hole)
Klip‐Lok 700 Bracket (9 Hole)
Klip‐Lok 406 Bracket (1 Hole)
Klip‐Lok 406 Bracket (9 Hole)
303‐006
Designed to clamp directly onto Klip‐Lok 406 sheet‐metal roof profile. This
bracket allows mounting of the solar arrays, without penetration of the roof
sheeting.
To be used for mounting with Tilt‐kits (#400‐002, #400‐004).
Includes 2x 20mm security‐head screws, for attaching Tilt‐kit.
303‐004
Designed to clamp directly onto Klip‐Lok 700 sheet‐metal roof profile. This
bracket allows mounting of the solar arrays, without penetration of the roof
sheeting.
To be used for mounting with Tilt‐kits (#400‐002, #400‐004).
Includes 2x 20mm security‐head screws, for attaching Tilt‐kit.
ROOF BRACKETS: Metal‐sheet ‐ KlipLok 406
303‐002
Designed to clamp directly onto Klip‐Lok 406 sheet‐metal roof profile. This
bracket allows mounting of the solar arrays, without penetration of the roof
sheeting.
To be used with L‐Bracket, M8 hole (#305‐002)
Includes 20mm security‐head screw, for attaching L‐bracket.
Does not include L‐Bracket (#305‐002)
ROOF BRACKETS: Metal‐sheet ‐ KlipLok 700
303‐003
Designed to clamp directly onto Klip‐Lok 700 sheet‐metal roof profile. This
bracket allows mounting of the solar arrays, without penetration of the roof
sheeting.
To be used with L‐Bracket, M8 hole (#305‐002)
Includes 20mm security‐head screw, for attaching L‐bracket.
Does not include L‐Bracket (#305‐002)
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 4
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

5. V‐600 Bracket (1‐screw)
V‐600 Bracket (2‐screw)
75mm Thin Film Mid Clamp
75mm Thin Film End Clamp
ROOF BRACKETS: Metal‐Sheet: V600
316‐001
Designed to clamp directly onto V600 sheet‐metal roof profile. This bracket
allows mounting of the solar arrays, without penetration of the roof sheeting.
To be used with L‐Bracket, M8 hole (#305‐002)
Includes 20mm security‐head screw, for attaching L‐bracket.
Does not include L‐Bracket (#305‐002)
316‐002
Designed to clamp directly onto V600 sheet‐metal roof profile. This bracket
allows mounting of the solar arrays, without penetration of the roof sheeting.
To be used for mounting with Tilt‐kits (#400‐002, #400‐004).
Includes 2x 20mm security‐head screws, for attaching Tilt‐kit.
Thin Film Module Clamps
301‐002
The Thin Film Mid‐Clamp is desgined to suit thin film modules with thickness of
6.8 ‐ 7mm. This clamp consists of both Upper and Lower sections supported by
UV stabilised EPDM rubber.
Part Includes: rail nut, 30mm M8 security‐head screw and washer.
302‐006
The Thin Film End‐Clamp is desgined to suit thin film modules with thickness of
6.8 ‐ 7mm. This clamp consists of both Upper and Lower sections supported by
UV stabilised EPDM rubber.
Part Includes: rail nut, 30mm M8 security‐head screw and washer.
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 5
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

6. L‐Bracket (with 6.3mm hole & EPDM)
L‐Bracket (with M8 hole & without EPDM)
Aluminium Trapezoidal Bracket
Hanger Bolt with L‐Bracket, 200mm M10
Hanger Bolt Assembly for Tiles
ROOF BRACKETS: Metal‐sheet ‐ L‐Bracket
305‐001
This L‐bracket mounts directly onto tin roofs. Its adaptable rail height
adjustment slot allows for a level PV array to be established, no matter how
uneven the roof is. The hole is drilled to 7.1mm, to fit a 6.3mm roofing screw.
Includes EPDM rubber gasket. Does not include rail‐to‐bracket connector or
roofing screw. *Also available in black anodised*
313‐002
This Hanger Bolt with L‐Bracket mounts directly onto tile roofs. This Hanger Bolt has
a 3/8" 12‐TPI thread. It is Stainless Steel and DICO™ coated, to ensure maximum
corrosion resistance, when screwing into a steel roof purlin. The assembly also
includes aluminium spacer to prevent crushing of tiles on installation.
Part included L‐Bracket, spacer, EPDM Cap and does not include rail‐to‐bracket
connector
305‐002
This L‐bracket mounts directly onto Lock Solar Klip‐Lok and Trapezoidal roof
brackets. Its adaptable rail height adjustment slot allows for a level PV array to
be established, no matter how uneven the roof is. The hole is drilled to 9mm, to
fit an M8 security‐screw. This part does not require the EPDM rubber gasket.
Does not include rail‐to‐bracket connector or M8 screw.
*Also available in black anodised*
ROOF BRACKETS: Metal‐sheet ‐ Misc
304‐001
Designed to screw directly onto Trapezoidal sheet‐metal roof profile, which
allows for mounting on the peaks of the roof sheeting. To be used with L‐
Bracket, M8 hole (#305‐002)
Includes 20mm M8 security‐head screw for attaching L‐bracket, 4x HEX head
6.3x25mm tapping screws and 4 EPDM rubber gaskets.
Does not include L‐Bracket (#305‐002)
313‐001
The Hanger Bolt with L‐Bracket mounts directly onto tin roofs. Its adaptable
height adjustment allows for a level PV array to be established, no matter how
uneven the roof. This Hanger Bolt has a 3/8" 12‐TPI thread. It is Stainless Steel
and DICO™ coated, to ensure maximum corrosion resistance, when screwing
into a steel roof purlin.
Part included L‐Bracket and does not include rail‐to‐bracket connector
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 6
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

7. Adjustable Portrait, Pan Tile Bracket
Portrait, Pan Tile Bracket
Landscape, Pan Tile Bracket
Portrait XL, Pan Tile Bracket
Plain Rosemary Tile Bracket
Slate Tile Bracket
111‐005
Designed for slate tile roof applications, the tile hook mounts directly to roof
rafters and is concealed between tiles to ensure water proofing is unaffected.
Does not include rail‐to‐bracket connector or roofing screws
314‐001
Designed for universal and flatter‐type tile roof applications, the adjustable tile
hook mounts directly to roof rafters and is concealed between tiles to ensure
water proofing is unaffected.
This bracket allows rails to be installed left to right on a tiled roof (solar panels
mounted in Portrait configuration)
Does not include rail‐to‐bracket connector or roofing screws
111‐003
Designed for longer tile roof applications, the tile hook mounts directly to roof
rafters and is concealed between tiles to ensure water proofing is unaffected.
This bracket allows rails to be installed left to right on a longer‐type tiled roof
(solar panels mounted in Portrait configuration)
Does not include rail‐to‐bracket connector or roofing screws
111‐007
Designed for concrete tile roof applications, the tile hook mounts directly to
roof rafters and is concealed between tiles to ensure water proofing is
unaffected.
Does not include rail‐to‐bracket connector or roofing screws
111‐001
Designed for standard tile roof applications, the tile hook mounts directly to
roof rafters and is concealed between tiles to ensure water proofing is
unaffected.
This bracket allows rails to be installed left to right on a tiled roof (solar panels
mounted in Portrait configuration)
Does not include rail‐to‐bracket connector or roofing screws
111‐002
Designed for standard tile roof applications, the tile hook mounts directly to
roof rafters and is concealed between tiles to ensure water proofing is
unaffected.
This bracket allows rails to be installed top to bottom on a tiled roof (solar
panels mounted in Landscape configuration)
Does not include rail‐to‐bracket connector or roofing screws
ROOF BRACKETS: Tile
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 7
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

8. 10‐30 deg, ADJUSTABLE TILT KIT
30‐60 deg, ADJUSTABLE TILT KIT
EPDM rubber piece for TILT kit
Roofing screws
ADJUSTABLE TILT KITS: 10‐30 degrees & 30‐60 degrees
400‐004
Designed for installing solar panels on flat roofs, including metal‐sheet and
concrete roofs.
The adjustable telescopic rear leg will provide a tilt angle between 30 to 60
degrees, for an optimum panel mounting angle. The mounting holes are drilled
to 9mm, to fit an M8 roofing screw.
This kit includes the following components:
Front‐Foot assembly
Adjustable 30‐60 degrees, telescopic rear leg assembly
2x rail‐to‐bracket connectors (with 2x 60mm security‐head screws)
Does not include:
EPDM rubber pieces (#104‐002)
Roofing screws
Lock Solar provides the 75mm Dacromet Coated roofing screw (#101‐021) for
suitable use with the Tilt Kit
Designed for installing solar panels on flat roofs, including metal‐sheet and
concrete roofs.
The adjustable telescopic rear leg will provide a tilt angle between 10 to 30
degrees, for an optimum panel mounting angle. The mounting holes are drilled
to 9mm, to fit an M8 roofing screw.
This kit includes the following components:
Front‐Foot assembly
Adjustable 10‐30 degrees, telescopic rear leg assembly
2x rail‐to‐bracket connectors (with 2x 60mm security‐head screws)
Does not include:
EPDM rubber pieces (#104‐002)
Roofing screws
400‐002
Tilt Kit Accessories
104‐002
This is the EPDM rubber piece used specifically for the tilt kits (#400‐002 & #400‐
004).
It is used when installing tilt kits onto metal sheet roofs, where there requires
water proofing and to prevent galvanic reaction between different metals.
Each EPDM measures 92*40*2.5mm and comes with predrilled holes
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 8
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

9. 3‐Panel, TIN‐roof, RACK‐IN‐BOX™ kit, 3140mm rail
With Earthing Components (optional):
2 x Rail Earthing Lug (309‐001) 401‐005
4 x Mid Clamp Stainless Steel Earthing clip (107‐001)
3‐Panel, TILE‐roof, RACK‐IN‐BOX™ kit, 3140mm rail
With Earthing Components (optional):
2 x Rail Earthing Lug (309‐001) 401‐006
4 x Mid Clamp Stainless Steel Earthing clip (107‐001)
3‐Panel, Adjustable TILE‐roof, RACK‐IN‐BOX™ kit, 3140mm rail
With Earthing Components (optional):
2 x Rail Earthing Lug (309‐001) 401‐010
4 x Mid Clamp Stainless Steel Earthing clip (107‐001)
This fully packaged box kit has all the components required to install 3 modules
(up to 1001mm wide), onto a standard tile roof.
This kit includes the following components:
2x 3140mm long rail pieces (#300‐003)
6x Adj Mid‐clamps (#301‐001)
4x Adj End‐clamps (#302‐001)
2x Rail Joiners (#307‐001) & 6x Cable clips (#108‐002)
6x Pan‐Tile brackets (#111‐001)
6x Rail‐to‐bracket connectors (#308‐001)
1x Security head drill tek bit (#110‐001)
12x Stainless‐steel 6.3*65mm Type‐17 Point roofing screws (#101‐007)
401‐002
401‐009
This fully packaged box kit has all the components required to install 3 modules
(up to 1001mm wide), onto a tile roof.
This kit includes the following components:
2x 3140mm long rail pieces (#300‐003)
6x Adj Mid‐clamps (#301‐001)
4x Adj End‐clamps (#302‐001)
2x Rail Joiners (#307‐001) & 6x Cable clips (#108‐002)
6x Adj Tile brackets (#314‐001)
6x Rail‐to‐bracket connectors (#308‐001)
1x Security head drill tek bit (#110‐001)
12x Stainless‐steel 6.3*65mm Type‐17 Point roofing screws (#101‐007)
RACK‐IN‐BOX™ KITS: 3‐panel, Tin & Tile roofs
This fully packaged box kit has all the components required to install 3 modules
(up to 1001mm wide), onto a metal‐sheet tin roof.
This kit includes the following components:
2x 3140mm long rail pieces (#300‐003)
6x Adj Mid‐clamps (#301‐001)
4x Adj End‐clamps (#302‐001)
2x Rail Joiners (#307‐001) & 6x Cable clips (#108‐002)
8x L‐Brackets (#305‐001)
8x Rail‐to‐bracket connectors (#308‐001)
1x Security head drill tek bit (#110‐001)
8x Dacromet 6.3*65mm self‐drilling roofing screws (#101‐006)
401‐001
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 9
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

10. 4‐Panel, TIN‐roof, RACK‐IN‐BOX™ kit, 4160mm rail
With Earthing Components (optional):
2 x Rail Earthing Lug (309‐001) 401‐007
4 x Mid Clamp Stainless Steel Earthing clip (107‐001)
4‐Panel, TILE‐roof, RACK‐IN‐BOX™ kit, 4160mm rail
With Earthing Components (optional):
2 x Rail Earthing Lug (309‐001) 401‐008
4 x Mid Clamp Stainless Steel Earthing clip (107‐001)
4‐Panel, Adjustable TILE‐roof, RACK‐IN‐BOX™ kit, 4160mm rail
With Earthing Components (optional):
2 x Rail Earthing Lug (309‐001) 401‐012
4 x Mid Clamp Stainless Steel Earthing clip (107‐001)
This fully packaged box kit has all the components required to install 4 modules
(up to 1001mm wide), onto a tile roof.
This kit includes the following components:
2x 4160mm long rail pieces (#300‐004)
8x Adj Mid‐clamps (#301‐001)
4x Adj End‐clamps (#302‐001)
2x Rail Joiners (#307‐001) & 8x Cable clips (#108‐002)
8x Adj Tile brackets (#314‐001)
8x Rail‐to‐bracket connectors (#308‐001)
1x Security head drill tek bit (#110‐001)
16x Stainless‐steel 6.3*65mm Type‐17 Point roofing screws (#101‐007)
This fully packaged box kit has all the components required to install 4 modules
(up to 1001mm wide), onto a metal‐sheet tin roof.
This kit includes the following components:
2x 4160mm long rail pieces (#300‐004)
8x Adj Mid‐clamps (#301‐001)
4x Adj End‐clamps (#302‐001)
2x Rail Joiners (#307‐001) & 8x Cable clips (#108‐002)
10x L‐Brackets (#305‐001)
10x Rail‐to‐bracket connectors (#308‐001)
1x Security head drill tek bit (#110‐001)
10x Dacromet 6.3*65mm self‐drilling roofing screws (#101‐006)
401‐003
This fully packaged box kit has all the components required to install 4 modules
(up to 1001mm wide), onto a standard tile roof.
This kit includes the following components:
2x 4160mm long rail pieces (#300‐004)
8x Adj Mid‐clamps (#301‐001)
4x Adj End‐clamps (#302‐001)
2x Rail Joiners (#307‐001) & 8x Cable clips (#108‐002)
8x Pan‐Tile brackets (#111‐001)
8x Rail‐to‐bracket connectors (#308‐001)
1x Security head drill tek bit (#110‐001)
16x Stainless‐steel 6.3*65mm Type‐17 Point roofing screws (#101‐007)
401‐004
RACK‐IN‐BOX™ KITS: 4‐panel, Tin & Tile roofs
401‐011
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 10
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

11. Mid‐Clamp Earthing Plate
Rail Earthing Lug assembly
Stainless Steel, 4‐6mm Cable Clip
Twist Lock Cable Tie
109‐001
Additional cable lengths can be bundled and securely clipped to the rail using
the durable Lock Solar Twist Lock Cable ties.
These ties are specifically made to fit into the dedicated channel of the Heavy‐
Duty rails (#300‐001 & #300‐002)
They are made from heat stabilised, weather resistant & UV protected Nylon
6.6, for outdoor use.
Size is 166mm long x 7.9mm wide
309‐001
This rail earthing lug is attached to the rail, located at either side of a rail‐joiner
(if rail‐joiners are used), or at the end of a single rail piece (if no rail‐joiners are
used).
It comes pre‐assembled with the rail‐to‐bracket connector.
An additional electrical earthing cable is simply screwed into the lug, for the
electrical connection into other earthing lugs, or back to the inverter.
NOTE: When attached to the rails, there requires an additional 100mm long
copper wire piece (4mm sq.cable), to electrically connect across the rail joiner
piece, as shown in this diagram.
CABLE MANAGEMENT COMPONENTS
108‐002
An alternative to cable ties and also conforming to the new AS 5033 standard
changes, these Stainless Steel cable clips sit in the module frame cavity between
the back panel and the frame.
They are very fast to install, effective and leave a neater look than cable ties.
We recommend to use 2 Cable clips, per panel.
EARTHING COMPONENTS
107‐001
This Stainless Steel earthing plate, slots into every‐other Mid‐Clamp, which then
clips onto the rail, thus providing electrical earthing of two connecting panels
together at the mid‐clamp.
Its serrated holes penetrate the rail and solar panel anodisation, creating the
conductive grounding path between them.
This earthing clip easily slots into a Mid‐clamp (#301‐001).
Does not include the Mid‐clamp.
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 11
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

12. Self‐drilling roofing screw, Dacromet 6.3*65mm. Hex/metal‐bonded washer
Type‐17 Point roofing screw, Dacromet 6.3*75mm. Hex/metal‐bonded washer
Type‐17 Point roofing screw, Stainless Steel 6.3*65mm. Hex head
Lock Solar Security Drill Tec Bit
HARDWARE
110‐001
This 60mm Tec‐bit is used to securely fasten the Lock Solar M8 security head
screws.
It is easily fitted to any electric hand drill, for fast installation times.
101‐021
This Dacromet Coated 75mm long roofing screw has a pointed drilling tip, so no
need to pre‐drill. It can be used to penetrate thin sheet metal, if required.
Can be used with L‐Bracket (6.3mm hole) & Tilt foot bracket, where the roof
purlins are wood. Size: 6.3 x 75mm
101‐007
This Stainless Steel 65mm long roofing screw is used to fasten the Tile brackets
into the wooden roof top rafters, that are concealed underneath the tiles. It has
a pointed drilling tip, so no need to pre‐drill. It can be used to penetrate thin
sheet metal, if required.
Can be used with Tile‐Brackets, where the roof rafters are wood.
Recommended 2 screws per Tile bracket. Size: 6.3 x 65mm
SCREWS
101‐006
This Galvanised 65mm self‐drilling roofing screw is used to bore into tougher
metal‐sheet roof type roofs.
It will self‐drill and thread without the need for pre‐drilling.
Can be used with L‐Bracket (6.3mm hole) & Tilt foot bracket, where the roof
purlins are steel. Size: 6.3 x 65mm
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 12
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

13. EcoFoot
EcoFoot Deflectors
EcoFoot Screw Bag
112‐003
The EcoFoot screw bag contains all the parts that are needed to fasten the
EcoFoot to the panel securely.
112‐001
Ecofoot is the naturally innovative next generation of ballasted non penetrating
flat roof mounting systems.With only one core extremely lightweight
component that interlocks, shipping and handling is made easy and more cost
effective.
Does not include fasteners
112‐002
The specially designed EcoFoot deflector can be used to reduce the total install
weight and help deflect wind.
Includes screw bag to fasten securely to Ecofoot base
EcoFoot™ Ballast Mounting Solution
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 13
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

14. Galvanised Steel Driven Post (3.5m)
Truss Assembly 15deg
Truss Assembly 25deg
312‐002
Truss Arm assembly for the TerraMount™ system, for modules mounted at
15degrees slope angle. Truss length calculated based on a standard 250w
module.
The material is T6063‐T6 aluminium.
312‐011
Truss Arm assembly for the TerraMount™ system, for modules mounted at
25degrees slope angle. Truss length calculated based on a standard 250w
module.
The material is T6063‐T6 aluminium.
TerraMount™ Ground Mounting Solution
312‐001
Steel Driven Post for the TerraMount™ system at 3.5m length. Hot Dipped
Galvanised to 100micron for maximum corrosion protection ensuring the
lifetime of your solar installation.
It is available in pre‐cut lengths to suit the individual soil and geographical
conditions.
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 14
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand

15. Batten Rail
Batten Rail Joiner Assembly
Batten Clamp Assembly
Post Pivot Assembly (4x M8 screws)
Post Pivot Assembly (2x M12 bolts)
312‐004
The Post Pivot Assembly attaches to the top part of the Post and provides the
main structural point of the truss rails.
This part is used for where the installation is constructed on a flat ground
surface, or where there are small elevation issues in the structure.
312‐008
The Post Pivot Assembly attaches to the top part of the Post and provides the
main structural point of the truss rails.
This part has a "jelly‐bean" shaped slot and is used for where the installation is
constructed on un‐even ground surface, or where there are elevation issues in
the structure, and where there requires re‐alignment of the truss during
installation.
312‐007
This is the batten joiner piece that is used to join two pieces of batten rails
together.
Part includes joiner piece profile, middle joiner guide piece, with the assembly
pre‐riveted for quick use.
312‐005
The batten clamp assembly is used to clamp the Batten rail (#312‐003) onto the
Truss rail (#312‐002)
Part includes 25mm M8 security‐head screw, washer and rail nut
312‐003
This is the batten support profile for the TerraMount™ system.
It is available in pre‐cut lengths to accommodate different design widths. (length
determined from the total row number of panels per structure, from left to
right).
The material is T6063‐T6 aluminium.
Lock Solar International Co., Ltd
www.locksolar.com
sales@locksolar.com 15
4th Floor, Gaysorn Building,
999 Ploenchit Road Lumpini,
Pathumwan, Bangkok, 10330 Thailand