Tanjore painting designs patterns and tanjore painting materials are most popular styles and Our products are highly appreciated for the attractive designs. https://goo.gl/UWNiMU

2. Following the outline
Pattern for Tanjore Painting
1. Pick amend plan for Tanjore
Painting design patterns.
2. Presently follow the outline
utilizing yellow carbon paper on the
canvas. Try not to follow the picture
in detail. For instance, while
following the trimmings simply
follow the blueprints as it were. Not
in subtle elements of the shapes.
3. The follow is for just the
judgment of the territory of the
beautifying regions and states of the
figure.
4. Care ought to be taken at this
phase to give an edge break on all

3. the four sides of the board to suit the
edge, once the painting is finished.

4. Sculptural Stage
1. By utilizing round/level brush,
apply a smooth layer of embellishing
gum in the brightening regions. The
proportion of emblazoning layer is
with Tanjore painting materials are–
Ratio — Arabic Gum: Chalk powder:
fevicol — 1:2:1 Leave the Canvas with
Emboss push to get for over multi
day.
2. If you need greater decoration
for certain zone to rehash the above
procedure Tanjore painting
materials.
3. Now check the right places
utilizing a pencil/pen to glue the
stones and pearls. After the correct

5. affirmation of the area for Stones
and pearls, Mix Few drops of fecivol
with some water. Stick the stones
beginning with greater stones first.
Abandon it
to get a fix
for multi
day.
Designin
g Stage
1. To get
a smooth
impact on
the
sparkling territory of the Tanjore
Painting Design Patterns. You have
to apply one more layer of

6. embellishing gum over the
stones/pearls.
2. Wait for 60 minutes. Presently
pick a bowl of water and cotton.
Dunk a bit of cotton in the water and
crush it to expel additional water.
3. Now with the wet cotton,
tenderly rub round way on the
emblazoned zone.
4. Keep as a top priority that you
have to keep up the tidiness on the
painting zone as well.
Ad lib Stage of the Tanjore
Painting Designs Patterns
1. Mark the plan with the assistance
of Ball-point pen over decorated
region.

7. 2. In a cone fill a blend which
contains Arabic Gum: Chalk powder:
fevicol in proportion of — 2:2:1/2
Carefully do cone work in filling
region (like side corner/column) with
great conventional plan.
Additionally, offer limits to the stones
and pearls with the assistance of the
cone. What's more, given it a chance
to dry.
3. Now cut a gold thwart sheet from
the Gold thwart booklet. Place the
gold thwart sheet over the plan and
stamp an edge impression with your
thumb for inexact shape.
4. Cut the require state of gold
thwart by leaving 3 to 4 mm

8. additional on every one of the sizes of
the require shape.
5. Apply stick (fevicol with water
blend) to the posterior of the gold

9. thwart and place over plan region.
Remove gold thwart stuck over
stones in Thanjavur painting. For this
Groove the shape with Safety-stick
delicately. Simply apply wet brush in
the focal
point of
stone.
6.
Utilize
self-
locking
pin to
expel
the
mollify
wet gold

10. thwart. You can utilize Johnson buds
rather than brush. State of the stone
can be modify utilizing self-locking
pin itself.