TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TIẾNG ANH 2024 - TỪ CÁC TRƯỜNG, ...
2.20 tổ chức lớp viết báo khoa học kỹ thuật đăng trên tạp chí quốc tế (15)
1. Tổ chức lớp viết báo khoa học Kỹ thuật đăng trên tạp chí
quốc tế (15)
(Electrical Engineering)
Kha Thái Đức
Đại học Lạc Hồng Giám đốc trung tâm viết báo khoa học bằng tiếng Anh
柯泰德線上英文論文編修訓練服務
http://www.chineseowl.idv.tw
Viết Tiếng Anh Học Thuật
2. Tiểu sử cá nhân
Kha Thái Đức (Ted Knoy) đã dạy viết tiếng Anh kỹ
thuật trong các trường đại học ở Đài Loan hơn hai
mươi năm. Ông là tác giả của mười bốn cuốn
sách về viết tiếng Anh kỹ thuật và chuyên nghiệp.
Ông đã thành lập một trung tâm viết tiếng Anh tại
trường đại học Y Yunpei đồng thời cũng là giảng
viên toàn thời gian tại trường. Ông đã chỉnh sửa
trên 55,000 bài viết cho việc đăng báo nghiên cứu
khoa học từ năm 1989. Ông là cũng nhà biên tập
tiếng anh cho một số tạp chí về khoa học, kỹ thuật
và y học của Đài Loan.
3. A. Nền tảng (Background)
• Thiết lập các đề xuất nghiên cứu (Setting of research proposal):
Mô tả một xu hướng phổ biến, phát triển hoặc hiện tượng trong lĩnh vực
của bạn để người đọc có thể hiểu được bối cảnh mà bạn đề xuất
nghiên cứu đang được thực hiện .
• Vấn đề nghiên cứu (Research problem) : Mô tả các hạn chế chính
hoặc thất bại của các nghiên cứu trước đây hoặc các phương pháp đã
nghiên cứu khi giải quyết các xu hướng, phát triển hoặc hiện tượng đã
nêu .
• Đặc điểm kỹ thuật định lượng của vấn đề nghiên cứu (Quantitative
specification of research problem): Định lượng hoặc đưa ra một ví
dụ về vấn đề nghiên cứu được trích dẫn trong tài liệu tham khảo trước
đó.
• Tầm quan trọng của vấn đề nghiên cứu (Importance of research
problem) : Mô tả các hậu quả về mặt lý thuyết và thực tế nếu không
giải quyết vấn đề nghiên cứu.
4. B. Thực hiện (Action)
• Mục tiêu nghiên cứu (Research objective) : Mô tả mục tiêu của
nghiên cứu đề xuất của bạn và bao gồm các đặc điểm chính riêng biệt
của nghiên cứu để đạt được mục tiêu nghiên cứu , điều mà đã không
được thực hiện trong nghiên cứu trước đây ( một câu )
• Phương pháp để đạt được mục tiêu nghiên cứu (Methodology to
achieve research objective) : Mô tả ba hoặc bốn bước chính để đạt
được mục tiêu nghiên cứu của bạn .
• Kết quả dự kiến ( Anticipated results) : Mô tả các kết quả định lượng
mà bạn hy vọng sẽ đạt được trong nghiên cứu của bạn.
• Đóng góp trong lĩnh vực lý thuyết và thực tiễn (Theoretical and
practical contribution to field) : Mô tả cách thức phương pháp hoặc
kết quả nghiên cứu đề xuất của bạn sẽ đóng góp về mặt lý thuyết trong
lĩnh vực nghiên cứu, quy luật và cũng đóng góp thiết thực trong sản
xuất, ngành công nghiệp dịch vụ.
5. Ví dụ 1: Electrical Engineering
Thiết lập các đề xuất nghiên cứu Multi-input multi-output (MIMO)
schemes attempt to increase the data rate in wireless communications. If
N antennas are used in MIMO systems, the data rate of MIMO systems
can be N times that of conventional systems, i.e. single-input single-output
(SISO) systems, subsequently increasing the data rate significantly.
Despite the higher data rate of MIMO systems, its performance is markedly
lower than that of SISO systems since MIMO systems can maintain many
channels; in addition, recognizing data of each antenna is extremely
difficult. MIMO systems thus adopt an advanced channel coding scheme
called low-density parity-check (LDPC) code.
Vấn đề nghiên cứu However, although capable of significantly upgrading
system performance, LDPC codes are limited owing to their complex
encoding process. In LDPC codes, an extremely large generator matrix G
must be multiplied for encoding.
6. Ví dụ 1 (cont.)
Đặc điểm kỹ thuật định lượng của vấn đề nghiên cứu For
instance, while the dimension of G approximates to 2000 by
2000 in the IEEE 802.11n standard, multiplying G expends a
considerable amount of time. However, only six registers are
necessary to complete encoding for conventional channel
coding, i.e. convolutional codes, explaining why LDPC and
conventional codes significantly differ in encoding complexity.
Tầm quan trọng của vấn đề nghiên cứu An extremely
complex encoding process requires a significant amount of
power for the system to complete all encoding tasks.
However, for a small wireless communication device such as
a mobile phone, notebook computer and PDA, power is a
highly valuable resource since the battery power supply is
crucial. Moreover, an efficient encoding process for LDPC
codes is problematic for MIMO systems.
7. Ví dụ 1 (cont.)
Mục tiêu nghiên cứu Based on the above, we should
develop a novel LDPC structure called a repeat-accumulate
(RA) code, as originally proposed in 2002. RA codes can
provide the system with an extremely low error rate of data,
yet an efficient encoding process. Its encoding resembles
the encode of convolutional codes, explaining the low
complexity. Of priority concern is how to design an RA code
such that the system performance can approach the “system
capacity”, as mentioned by the renowned communications
researcher Shannon in 1948.
8. Ví dụ 1 (cont.)
Phương pháp để đạt được mục tiêu nghiên cứu To do
so, an extrinsic information transfer (EXIT) chart can be
simulated in MIMO channel to become the design baseline
of MIMO systems. The MIMO system capacity can then be
determined by some formulas, as provided by Channon, to
derive an appropriate value of the signal-to-noise ration
(SNR). Additionally, based on this appropriate SNR, a curve
fitting can be derived to match the EXIT chart. Moreover, a
probability density function of “variable nodes” and “check
nodes” in the RA code can be determined by the above
curve and, finally, the design of RA codes can be completed.
Furthermore, confirmation can be made that the RA code
determined via the above methods performs well in MIMO
systems.
9. Ví dụ 1 (cont.)
Kết quả dự kiến As anticipated, applying the adequately designed
RA code can ensure that the MIMO system achieves an extremely low
data error rate and, simultaneously, maintains the advantage of a high
data rate. Based on the simulation results, the MIMO system with RA
codes can perform equivalent to the SISO system. Hence, the low
performance problem in MIMO systems is averted by adopting the well-
designed RA code.
Đóng góp trong lĩnh vực lý thuyết và thực tiễn While cable-free
wireless communication devices require batteries, their power supply is
limited, accentuating the importance of the power resources. For
wireless devices to perform efficiently, a battery can supply the system
for an extended period. Hence, the encoding process must be
simplified when applying LDPC to MIMO systems. The proposed RA
code, one class of LDPC, is feasible for use in a MIMO system device,
the encoding process can become efficient and a significant amount of
power is saved. Hence, small wireless communication devices can
operate for extended periods without using battery chargers.
10. Ví dụ 2: Electrical Engineering
Thiết lập các đề xuất nghiên cứu Among the numerous advantages
of proxies include controlling access, conserving network bandwidth,
reducing communication delay and alleviating loads of original server.
Therefore, various proxies appear in the Internet based on application
requirements, e.g., a HTTP proxy for the Internet, a FTP proxy for file
transmission, and a SOCKS proxy for firewall traversal. Meanwhile,
most applications can communicate through a proxy.
Vấn đề nghiên cứu However, the mobile computing paradigm
negatively impacts certain applications. Referred to as mobility-
unaware applications, applications designed for fixed network
environments are unaware of the movements of mobile devices. When
roaming, such applications access the Internet through the configured
proxies – probably far from the visited network rather than through
nearby proxies. Such behavior barely achieves advantages of the
proxy. Additionally, communication may incur interferences, e.g.,
becoming congested, incurring a long delay, encountering a firewall’s
obstacle, or becoming intercepted.
11. Ví dụ 2 (cont.)
Đặc điểm kỹ thuật định lượng của vấn đề nghiên cứu
For instance, in addition to the difficulty of manually
changing the proxy configurations of applications during
handoff, using a Proxy Auto-Config file (pac file) neither
satisfies non-HTTP applications nor enables users to roam
freely. Despite the many proposals to obtain the address
of the nearby proxy, applications must still detect the
movements, acquire the address of the nearby proxy and
utilize the nearby proxy.
Tầm quan trọng của vấn đề nghiên cứu While creating
mobility-aware applications hinders developer, modifying
applications may be infeasible owing to a lack of source
codes. Providing applications is an effective means of
communicating through a nearby proxy without modifying
applications.
12. Ví dụ 2 (cont.)
Mục tiêu nghiên cứu Based on the above, we should develop the
Tapster as the transparent proxy redirector for mobile computing.
Phương pháp để đạt được mục tiêu nghiên cứu To do so, the
Tapster can be implemented in a Windows XP environment.
Experiments can then be performed to demonstrate the effectiveness
of the (NOTE: Add 1-2 more sentences to describe the methodology)
Kết quả dự kiến As anticipated, simulation results can indicate that
the Tapster can quietly redirect the requests of applications to the
nearby proxy without application awareness, configuration and
modifications. The applications function as if they were staying at the
home network and interacting with the configured proxy.
Đóng góp trong lĩnh vực lý thuyết và thực tiễn Importantly, the
Tapster can support various proxies, not just the HTTP proxy (NOTE:
Elaborate more on the theoretical and practical contributions of the
Tapster in your research field and industry).
13. Ví dụ 3: Electrical Engineering
Thiết lập các đề xuất nghiên cứu White LED drivers play an
increasingly prominent role in consumer electronic products, including
cellular phones,, PDAs, LCD monitors, LCD TVs and car lighting systems.
Vấn đề nghiên cứu However, in white LED drivers, the charge pump
switching control structure, feedback control structure and power
consumption pose bottlenecks for further development.
Đặc điểm kỹ thuật định lượng của vấn đề nghiên cứu For instance, a
complex control structure may increase power consumption and chip area
by 10 - 20% and 20 - 30%, respectively, subsequently increasing
production costs.
Tầm quan trọng của vấn đề nghiên cứu The inability to develop an
enhanced control structure in white LED drivers will not only miniaturize
battery life due to the extra power consumption, but also enlarge total chip
area and lower market competitiveness.
14. Ví dụ 3 (cont.)
Mục tiêu nghiên cứu Based on the above, we should
develop a white LED driving method containing an efficient
charge pump switching control and adequate feedback control.
Phương pháp để đạt được mục tiêu nghiên cứu To do so,
a switch control network can be established to compose a
charge pump model. Behavioral simulation can then be
performed to simulate the control structure in its early stages.
Next, feedback control circuits can be simulated with charge
pump circuits. Additionally, the white LED driver, including
charge pump circuits and feedback control circuits, can be
implemented with other analog circuits in the same chip.
15. Ví dụ 3 (cont.)
Kết quả dự kiến As anticipated, in addition to
increasing power efficiency to more than 90%, the
proposed white LED driver can reduce the number
of chip components.
Đóng góp trong lĩnh vực lý thuyết và thực tiễn
Importantly, the proposed method can significantly
contribute to efforts to design a novel white LED
driver with increased power efficiency and fewer
product components than found in conventional
design.
16. Ví dụ 4: Electrical Engineering
Thiết lập các đề xuất nghiên cứu High speed comparators
are conventionally adopted in power management ICs to
control power switches precisely.
Vấn đề nghiên cứu However, conventional comparators can
not react timely to turn power switches on and off accurately,
incurring a power loss during power transition.
Đặc điểm kỹ thuật định lượng của vấn đề nghiên cứu For
instance, a comparator with a reaction delay exceeding 50ns
may incur an efficiency loss of 2-3% in power regulation.
Tầm quan trọng của vấn đề nghiên cứu The inability to
develop a faster comparator in modern power regulation ICS
will not only shrink battery lifetime due to additional transition
power loss, but also make handheld electronic products less
competitive marketwise.
17. Ví dụ 4 (cont.)
Mục tiêu nghiên cứu Based on the above, we
should develop a novel recognition framework,
capable of accelerating input signal differentiation
without appending complex circuits.
Phương pháp để đạt được mục tiêu nghiên cứu
To do so, a small dynamic-range circuit can be
constructed in the preliminary stage to enhance the
sensitivity of a comparator. A dynamic-range clamping
circuit can then be placed in the subsequent stages to
expedite signal diagnosis. Additionally, the level-
shifter, which redeems normal dynamic range, can be
implemented to regain driving capability of the
comparator.
18. Ví dụ 4 (cont.)
Kết quả dự kiến As anticipated, the proposed
recognition framework can increase efficiency by
30ns - 50ns over that of conventional structures by
adding less than 5% additional circuitry.
Đóng góp trong lĩnh vực lý thuyết và thực tiễn
Without increasing circuit complexity, the proposed
framework can facilitate efforts to design a high
speed comparator in order to effectively suppress
switching power loss, making it especially
attractive for systems that demand high efficiency
such as portable electronic products.
19. Tài liệu tham khảo
Knoy, T (2002) Writing Effective Work
Proposals. Taipei: Yang Chih Publishing