Case Study Of Vanilla Rum Apple Butter

Case Study Of Vanilla Rum Apple Butter
1. Product
The product that I have chosen for this project is a food product, Vanilla Rum Apple Butter. Apple
butter is made pretty much like apple sauce except you add spices or flavorings to it and slow cook
it for multiple hours. Slow cooking apple butter for multiple hours will result in it becoming thick
and spreadable. The Vanilla Rum Apple Butter would mainly be sold online and at local farmers
market. My target market could potentially be a wide range of food consumers. The one target
consumer would be anyone who likes apple butter and who is wanting to change it up a little bit
from your average apple butter. Then you have your apple lovers, your rum drinkers and anyone
who likes the flavor vanilla. You also have your morning toast eaters due to most people who
consume this product would eat it ... Show more content on Helpwriting.net ...
~Large stockpot pot is used to cook down the apples with the apple cider for thirty minutes.
Large slow cooker – can cost about $50.
~ Large crockpot is used to slow cook the apple butter in for eight hours.
Immersion blender – can cost anywhere from $10 or more.
~ An immersion blender is used to make the apple butter a uniform texture.
Canning set: includes the water bath canner, the rack for the jars, a bubble remover, jar lifter,
magnetic lid lifter, a jar wrench and a jar funnel – cost at Target is $35.
~The canning set is used to process the product in the mason jars to preserve the product.
Liquid measuring cup, measuring cups and measuring spoons – cost at dollar store is a $1 each.
~ The liquid measuring cup, measuring cups, and measuring spoons will be used to measure out the
ingredients.
Wooden spoon – cost at dollar store is a $1.
~ Wooden spoon will be used to stir the product during the whole process.
4/5. OTHER EXPENSES
The business will incur other expenses while it produces Vanilla Rum Apple Butter. Other expenses
that will be incurred will be rent, insurance, and advertisement
... Get more on HelpWriting.net ...

Res 341 Dq 1
DQ 1
How would you define research? What is the purpose of business research? How has the Internet
changed the quality and quantity of research?
Kapil C. Mathur, MBA
Research can be defined as the search for knowledge, or as any systematic investigation, with an
open mind, to establish novel facts, solve new or existing problems, prove new ideas, or develop
new theories. Research can be divided into different steps in order to understand the whole process
more in depth. The first step towards conducting research is to observe. Consistst of the subject area
of ones interest and following that subject area to conduct subject related research. The subject area
should not be randomly chosen since it requires reading a vast amount of ... Show more content on
Helpwriting.net ...
The quality of the research found on the internet may vary depending on the reputation of the site it
is being generated from although the quanity is very very wide it may not always be the best quality.
DQ 2
What is the reliability of a measurement? What is the validity of a measurement? Can a
measurement be valid if it is not reliable? Explain.
Relaible measurment is the consistency of a set of measurements or of a measuring instrument, often
used to describe a test. Reliability is inversely related to random error. The validity of a measurment
is how accurate it is. Reliability does not imply validity. That is, a reliable measure is measuring
something consistently, but you may not be measuring what you want to be measuring. For example,
while there are many reliable tests of specific abilities, not all of them would be valid for predicting,
say, job performance. A common example often used to illustrate the difference between reliability
and validity in the experimental sciences involves a common bathroom scale. If someone who is 200
pounds steps on a scale 10 times and gets readings of 15, 250, 95, 140, etc., the scale is not reliable.
If the scale consistently reads "150", then it is reliable, but not valid. If it reads "200" each time, then
the measurement is both reliable and valid. This is what is meant by the statement, "Reliability is

Disadvantages Of Handoff Schemes
D. Handoff schemes Handoff scheme refers to systematic and organized plans to handle handoff,
including configuration of network, design procedure of handoff, and specific handoff process
management. Based on certain criteria these schemes are categorized as : 1. Handoff schemes based
on Prioritization: 1.1 Non Prioritization schemes: This Scheme [16] has been employed by the
typical radio technologies proposed for the Personal Communication Systems (PCS) operating at the
band of 2 GHz. This scheme does not differentiate handoff and initial (new or originating) request
calls. As long as, there is a channel available in the cell, either an originating or a handoff call
request will be served. If there are not any free channels, the request is blocked immediately.
Advantage: The channel allocation is relatively easy. Disadvantage: The main disadvantage of this
scheme is that, since no priority is given to handoff request calls over originating calls, the forced
termination probability is relatively higher than it is normally anticipated [16], and also there is no
proper channel utilization. ... Show more content on Helpwriting.net ...
However, all these requirements cannot be satisfied simultaneously, and therefore, tradeoffs between
all of them are carried out. From the users perspective, the termination of an ongoing call is more
annoying than the blocking of a new call [18]–[19],[77]–[78]. Consequently, the handoff blocking
and the forced termination probabilities ought to be minimized. To achieve these requirements
several handoff prioritizing schemes have been

Essay about Preventive Maintenance Checks and Services
Preventive Maintenance Checks and Services (PMCS) means systematic caring, inspecting, and
servicing of military equipment to keep it in good condition and to prevent breakdowns. The
operator of the vehicle mission is to be sure to perform PMCS each time he/she operate the vehicle.
Always do the PMCS in the same order, so it gets to be a habit. Once you've had some practice, you
will quickly spot anything wrong.
There are three types of Preventive Maintenance Checks and Services (PMCS) that the military
performs on their vehicles; they are, before, during, and after checks. These checks are annotated on
DA form 5988–E, which is the Equipment Maintenance and Inspection worksheet. If anything looks
wrong and you cannot fix it, write ... Show more content on Helpwriting.net ...
5. Check for missing or damaged fire extinguisher. Check for damaged or missing seal.
6. Check underneath vehicle for evidence of fluid leakage. Visually check left side of vehicle for
obvious damage that would impair operation. Check fuel tank for leaks created by damages or
expansion of fuel.
7. Start engine. Check for missing or damaged seatbelts. Air cleaner indicator should be in the green
area. Tachometer should read 600–650 at idle. Check engine water temperature gauge. Range is
175–200 F with engine warmed up. Check primary air pressure gauge and secondary air pressure
gauge. Normal range is 90 to 130 psi. Make sure warning buzzer is operational. Check voltmeter.
Needle should be in green area. Check transmission oil temperature gauge . Normal range is 120 F
220 F. Engine oil pressure gauge reads at least 15 psi on or 10 psi.
Driving the vehicle perform During PMCS
1. Check vehicle steering response for unusual free play,
Binding, wander, or shimmy. <p>
2. Monitor all gauges during operation.
3. While driving, operate service brakes to determine ability to stop.
Checks for pulling, grabbing, or other abnormal operation.
After driving perform After PMCS
1. Check CV boot for leaks or tears. Failed boots may be repacked with grease until

Plastic from Milk
Plastic from milk
Materials and Equipment
The materials listed below are for doing the experimental procedure exactly as written. However,
you can make changes to the experimental procedure in order to use a different size measuring cup
and/or a stovetop rather than a microwave. * Mugs or other heat–resistant cups (4); they should all
be identical so as not to introduce another variable (See Variables in Your Science Fair Project), and
large enough to hold more than 8 oz. of liquid * Masking tape * Pen or permanent marker *
Teaspoon measuring spoon * White vinegar (at least 8 oz.) * Milk (at least 12 cups); nonfat, 1%,
2%, and whole milk will all work * Microwavable liquid measuring cup; should be large enough ...
Show more content on Helpwriting.net ...
Scrape the curds off of the cloth and knead them together, as you would bread dough, into a ball.
This is your casein plasticWeigh the ball of casein plastic on a kitchen scale (set for grams) using a
piece of wax paper to keep the scale clean. Record the weight in your table. 1. When weighing,
remember to turn on the scale and first make sure it reads zero with nothing on it. This will help
make sure your measurements are accurate. Also, use a new sheet of wax paper each time you weigh
a different ball of casein plastic. This will give you exact weights (without crumbs and liquid from
the last ball)
Terms and Concepts * Casein plastic * Plastic * Molecule * Polymer * Monomer * Casein * Acid *
Yield * Curds
Bibliography
These resources have more information about, and photos of, casein plastic: * Morgan, J. (2001,
June 11). Welcome to the Caseino. Retrieved July 30, 2012, from http://www.caseino.internet–
today.co.uk/ * Plastics Historical Society. (2011). Casein. Retrieved July 30, 2012, from

External, Internal, And Construct Essay
Validity: External, Internal, and Construct
Internal validity measures what it intends to measure or, more generally, if it examines what it sets
out to examine. In effect, a valid study gives real answers to the research questions and provides a
real test of the hypotheses. According to Aken, Berends, and Bij (2007), "Internal validity concerns
conclusions about the relationship between phenomena. The results of a study are internally valid
when conclusions about relationships are justified and complete. Classical methodology has
particularly focused on the adequacy of conclusions about causal relationships. A conclusion about a
causal relationship is internally valid, when there are good reasons to assume that the proposed
relationship is adequate."
When researching the Tailored Adaptive Personality Assessment System (TAPAS) test, the goal of
which is to measure the narrow personality constructs that are known to predict outcomes in work
settings. The internal validity of this research deals with the extent to which the experiment actually
measures the relationship between the two variables. When considering the research this
hypothetical situation, one can envision a number of threats to internal validity. The threats include
the use of future soldiers in an academic setting as surrogates for employees working in an
organization, the relatively short duration of the research as compared to the ongoing nature of
personal growth, and the ability of future soldiers

Instrument Used For Measuring Depression
ASSESSMENT INSTRUMENT REVIEW.
In this paper I am going to review instrument used for measuring depression. Depression can be
defined as that state of mind that an individual is sad or in an unhappy mood. Other symptoms
associated with depression are the feeling of tiredness, unenthusiastic, or hopeless. In some cases,
depression can lead to suicidal ideation. It can be described as severe case of major depression; or in
a chronic, mild–to–moderate form, as is the case with persistent depressive disorder.
Depression is a serious, but common, illness. It is believed that one in ten adults report experiencing
depression, and the condition is the most common cause of disability in the United States. In life an
individual, has 17% chances of becoming depressed. It usually starts from the late teens or early
twenties
The instrument I am comparing and contrasting here are:
1). The Major Depression Inventory. This is an instrument developed by the world health
organization's collaborating Center in Mental Health. It is a category B measuring instrument. It is a
12 items, self–reporting mood questionnaire. It items are measured as a frequency over a two–week
period. MDI also gives us the opportunity to assess that severity of the depression. The patient is
asked to rate how much time in the past two weeks each of the symptoms of the depressive
syndrome was present.it has a six–point rating scale ranging from none (zero) to all of the time (5).
Therefore, this is a subjective scale

A Brief Note On The Quality Of Service
Abstract: The Quality of service in general refers to capability to provide flawless, fast and
consistent communication across the network. The factors that influence QoS are error rates,
bandwidth, throughput, transmission delay, availability, jitter, etc. Any network must provide secure
and reliable service and to achieve this it needs to consider the above factors. Hence we can say that
the QoS of a network is a set of factors to efficiently use the resources of the network. I am using the
above factors to measure the QoS of different networks and compare them.
Introduction:
In recent times Quality of Service has emerged as one of the important topics for research. QoS can
be defined as the all round performance of a computer network. Any network is expected to provide
secure and reliable service. QoS helps provide better service and this can be made possible either by
increasing the priority of a flow or by decreasing the priority of another flow and this flow can be
managed by using congestion management mechanisms. If a network capacity is insufficient then
the QoS becomes an important factor, for example for real time streaming multimedia applications
like Skype, online games, youtube etc., as in such applications if the delay is too much then the
purpose of the application will not be served. The factors that influence Quality of Service are: Error
rates Bandwidth Throughput Transmission Delay Availability Jitter
Quality of Service Factors: Error Rates:

A Research Project On Magellan Aerospace Wrexham Essay
Introduction This project plan has been written after task 1 and 2 have been completed. The project
problem was outlined in September and market research followed. For the detailed project problem,
a workshop was carried out to get the perspective from the inspectors and managers in Wrexham to
outline their biggest concerns. Next market research was carried out to identify whether a CMM
upgrade was suited or whether the new technology was needed to be purchased to overcome the
problems. The decision was made that a CMM upgrade would be most suited so that would
formulate the provisional project plan Details of these tasks will be commented on in detail in the
final project report. By the end of this project, the issues with one of the CMM machines at
Magellan Aerospace Wrexham will be addressed and successfully have new measures implemented.
As mentioned in the proposal this is a continuation of a wider project to either replace or retrofit all
the CMM machines within the business. This project plan will be using tools that will be actively
used throughout the project to actively manage and be adjusted to suit the changing course of the
project. Project Aims and Objectives Aim Implement a new system into the Wrexham CMM
machine demonstrating a reduced measurement time of 50% compared to the old system as well as
demonstrating improved software stability and process improvement. Objectives 1.0. Learn from the
mistakes and issues with the Bournemouth CMM upgrade through

Data Center Network : Neha Maid Essay
Data center networks
Neha Maid
Abstract – Presented here is a survey paper that puts light on the recent work and research done in
the field of Data Center Networks. This survey paper is divided into sections describing each aspect
of data center networks. The aspects covered are Routing in data center networks, networking
infrastructure inside a data center, five generations of datacenter networks, congestion control
protocol, Green data centers. Brief description has been provided regarding the power consumption
of data center networks and the need for research in this area to make the data center networks
environmental friendly by optimized energy utilization.
INTRODUCTION
In today's world each sector of industry need the internet services. The way we enjoy the deep
services provided by the internet is only possible because of data centers. They play a critical role
for enterprises by helping them expanding their capabilities. Incorporating software abstractions
with DCN has helped with the evolution of DCN. As the need for cloud based applications increase
so does the need of DCN to work more efficiently increases as well. Because of cloud computing
the DCN are growing even larger in size and will grow further more in future. DCN contains
thousands of servers. Interconnecting all these servers is the challenge the researchers face. They are
generally connected via network interface cards, cables, routers and switches. Placement of all these
devices

My Barroom Observation
In lieu of having the opportunity to measure a tall object, I decided that it would be interesting to
know the height of my barn because it was never identified. There are few steps to finding how tall
an item is, however, it is quite difficult to be completely accurate with the objects that I utilized.
First, I needed to build a clinometer with a straw, protractor, and string, which was used to find the
angle of elevation. "The angle of elevation is the angle formed by a horizontal line and a line of
sight to a point above the line"(Rehill), and in this specific scenario, the point is the top of the barn.
Furthermore, I then measured the distance from the barn to where I was standing and looked,
through the straw, to the top of it. I had to ... Show more content on Helpwriting.net ...
Moreover, the answers that I got are reasonable because they do not seem too small and they are
quite average for an one and a half story building. Nevertheless, the height of the barn might be
inaccurate because errors could have a drastic impact on the final answer. To illustrate, the
measurements are the basis for the whole entire problem by reason that trigonometric ratios place
primary importance on them, so, therefore, if they are incorrect, then all of the resulting numbers
will be wrong. I struggled with obtaining the appropriate angle measurements because I had
problems with pinching the string at the correct place and viewing the necessary spot through the
straw. Also, if the calculations were amiss, then it would produce false numbers, which causes the
final answer to be off due to the legitimate figures not being incorporated. I had a problem with this
also as I did not set up the correct equations at first, which would give me faulty calculations and,
consequently, mess up my final answer. However, I quickly figured out that my equations were
incorrect, so, therefore, I did not experience any problems attributed to that exact reason. Another
problem that I faced was with building the clinometer itself due to the protractor being attached to a
geometric template and not aligning the straw correctly, but I just used my protractor as there was no
effect and I figured out how the straw needed to be

Gun Violence In America
Gun violence is a major problem. Various proposals have been offered by the lobbyists, politicians
and citizens to reduce including ban on assault rifles, military style riffles, some even went on to the
extent of shedding some worrisome over the second amendment because of the series of gun
violence in the country. No doubt that this is a challenging subject and it requires bold actions in
order to reduce the violence perpetrated by the wrongful use of gun that is now a days use to take
the life of not only adults but young kids in elementary school, home invaders use guns to kill
innocents, arm rubbers rub banks to get what they want, citizens on citizens crimes is becoming
rampant. This worried me so much, and I had to shed some suggestions that I think might be useful
or even considered in reducing gun violence. "From July 1, 2013 through June 30, 2014, there were
a total of 48 student, staff, and other nonstudent school–associated violent deaths in the United
States, which included 26 homicides, 20 suicides, 1 legal intervention death, and 1 undetermined
violent death." NCES Data. In regards to this burning issue of gun violence, I have few suggestions
that I personally think will be helpful in combating and reducing the gun violence in our various
societies. Since us all as a citizen can be a victim of gun violence, then I have this believe that
certain solutions will help reduce the violence. For example, I would advocate for major public

Pt1310 Lab Review
Review R17. With a length of 1000 km, a rate of 10 Mbps, and a packet size of 1 kB, the sender
finished transmitting before the first bit of the packet reached the receiver. With a length of 10 km, a
rate of 1 Mbps, and a packet size of 500 bytes, the first bit of the packet reached the receiver before
the sender was finished transmitting. R23. Application layer–applications and their application–level
protocols reside here Transport layer– transports application–level messages between application
endpoints Network layer–moves network–layer packets from one host to another Link layer– routes
a datagram through a series of routers between the source and destination Physical layer–moves the
individual bits ... Show more content on Helpwriting.net ...
a. distance/ propagation speed dprop= m/s b. packet size/ transmission rate dtrans=L/R c. End–to–
end delay= dtrans + dprop = (m/s) +(L/R) d. The last bit is on the link, just leaving Host A. e. The
first bit is still on the link being propagated. f. The first bit is already at Host B. g. dtrans= (120
b/56000bps) = (3/1400) s = (m/ (2.5*(10^8 m/s)) (250,000,000 m/s) *(3/1400 s) = 535,714.285714
m P8. a. 3000000 b/ 150000 b= 20 users supported b. p=.1 c. (120 choose n) *(.1n) *(.9120–n) 20 d.
1–∑(120 choose n)*(.1n)*(.9120–n) n=0 P10. End–End Delay=(2*dproc)+(L/R1)+(L/R2)+(L/R3)+
(d1/s1)+(d2/s2)+(d3/s3) End–end delay= (2*.003 s) + 3* (12000b/2000000b/s) +
(5000000m/250000000m/s)+(4000000m/250000000m/s)+
(1000000m/250000000m/s)=.006s+.018s+.02s+.016s+.004s= 64 ms The end to end delay is 64 ms.
P13. a. First packet waits 0 s, second waits L/R s, third waits 2L/R s. n packet waits (n–1)L/R. n–1
∑ kL/R= L(n–1)/2R is the average queuing delay. K L(n–1)/2R

Benefits And Downfalls Of The United States
I. INTRODUCTION
Technology is an essential part of human development, but with technological advancements we can
see our lives being changed every single day. In Sao Paulo, technology is on the rise and is slowly
catching up with the United States and other countries that are quickly developing. With a
generation of kids in the United States that have connection to anything at their fingertips, we can
notice that our perspectives and modalities are always adapting. America has developed wireless
technologies that transfer data with broadband and wireless devices. Streaming services such as
Pandora, Spotify, ITunes radio, Pandora, Google Play, and Beats Music have provided users with
applications to stream music daily. Phone carriers ... Show more content on Helpwriting.net ...
The data transfer rate is very important because it regulates our devices and technologies we use. In
general, the data transfer rate reflects changes and improvements in digital technologies, where
newer systems, such as solid–state electronics, have resulted in much higher data transfer rates
within only a few decades. Often, people mistake transfer rate with broadband, nevertheless, they
are two different things working in slightly different ways.
Transfer rate looks at the amount of data that has actually been transferred between two different
points, while bandwidth is a measurement of the theoretical maximum transfer capacity of a certain
point on a network. With all this data flowing freely, there has to be some sort of restriction on how
fast different applications are. This is where net neutrality comes into play. For example, online
streaming effectively requires your computer to download a new image once every fraction of a
second. This takes up much more data than sending a simple email or using a simple application.
The result of this is that organizations and bigger users have to buy high performance networks to
maximize rates. Companies such as T– Mobile have released unlimited data plans with no cap on,
and this has been causing waves throughout the industry. They have been attempting to gain market
share with companies like AT&T and Verizon. Now, they offer to pay out the contract fees of
customers who switch over. T– Mobile may not be favoring one

Precision And Accuracy Lab Report
Determining the Density of a Polystyrene Sphere with Precision and Accuracy
Abstract: The objective of the lab is to determine the volumes of the polystyrene spheres with three
different measuring tools: Water Displacement, Analytical Scale, and Triple Beam Balance Scale.
The experiment is meant to help understand the concept and application of precision and accuracy in
experimental measurements. Accuracy is a measure of how closely the results of repeated
measurements are to the true value of what is being measured. Precision is the variability in the
results from the repeated measurements, and how close the repeated measurements were to one
another. In this lab, the method for measuring the volume of the polystyrene spheres is done with the
previously stated tools: Water Displacement, Analytical Scale, and Triple Beam Balance Scale. The
standard deviation for the entire classes volumes and masses are recorded to determine the densities.
Introduction: Accuracy and precision were the major aspects of the lab. Accuracy is how close the
average of the measured values are to the actual value. Precision is the closeness of repeated
measurements. In the lab, the aim was to get as close as possible with both accuracy and precision
when determining the mass and volume of the spheres. The mass was determined by weighing the
spheres on the Analytical Scale and Triple Beam Balance Scale. The volume is determined by
measuring with a ruler and by water displacement. The standard

Future Of Sensors : A Study Conducted By Intechno Consulting
Future of sensors
Trends
A study conducted by Intechno Consulting [ ] shows that the non–military, open market for sensors
grew from EUR 81.6 billion in 2006 to EUR 119.4 billion in 2011 and can be expected to grow to
EUR 184.1 billion until 2016. This equates to an annual average growth of 8.5%. Of the EUR 184.4
billion EUR global market for sensors in 2016, 9.7% will go to the machinery industries, 8.9% to
the process industries, and 22.8% to the vehicle industries including airplanes, ships and rail
vehicles.
The figures below show the declining market shares of Western Europe, in spite of Germany's
strong overall position in the sensors market. The main reason for this is the fact that Western
European sensor buyers are found mostly in the established industries, while the USA and Japan
lead in information and communication technology–the main growth sector for the future sensors
markets.
Figure 5: Forecast of the Non–Military Open World Market for Sensors until 2016: Subdivision by
Regions [26]
This is also confirmed in a survey conducted by PwC [ ], where respondents from Asia were more
likely to say their companies are investing in sensors, followed closely by Latin America. On the
other hand, North American respondents were least likely to say their companies are investing in
sensors and they have no plans to close the global gap. Asia (26%) and Africa (18%) expect to
invest more in sensors while only 8% of respondents from European companies and 7% of

The Importance Of Uplink Over Utilization Protection
Uplink over utilization protection – It's important to establish thresholds when looking at both short
and long term utilization and growth of the network infrastructure. Doing so eliminates guesswork
and provides a clear understanding of when additional resources should be required. Specifically
speaking, a threshold is normally based on percentage of usage (in comparison to the maximum
available bandwidth). Example; 50% of 100 Mbps translate to 50 Mbps of overall usage. When
establishing a percentage threshold, it's important to consider things like "margin of safety" and
"historic growth rates". In the case of "margin of safety", the threshold number should be high
enough to alert that more bandwidth will be needed, but low enough to ... Show more content on
Helpwriting.net ...
One other thing to note regarding bandwidth, the difference between 100 Mbps and 1 Gbps is
capacity, not speed of operation. A 100 Mbps Ethernet connection is capable of passing 100
megabits of data in a one second period. In comparison a 1 Gbps is capable of passing 1 gigabit of
data in a one second period. The actual speed of the data is the same, it's just capable of passing
more data in a one second period. (Think of 100 Mbps connection as a single lane road with a 1
Gbps connection as a multi–lane highway with the speed limit of both roads being 55 Mph). In this
example more cars can travel on the highway as compared to the single lane road, but are still
traveling at the same speed.
For more information this this subject, see tech brief "Latency Fact vs. Bandwidth Fiction"
Visit the EAO public portal https://sharepoint.etslan.org/srt/srtdiv/capability_mgmt/default.aspx )
General bandwidth utilization guidelines
As a general rule of thumb, the chart below (see figure 1.1) shows a general guideline indicating the
peak percentages of utilization on a LAN or WAN, and what (if anything) needs to be addressed
depending on peak utilization. With regards to peaks, another factor needs to be mentioned, and
that's the frequency of peaks. The frequency of peaks defines how often the peaks occur. This is an
important point as the higher the frequency the sooner the potential need for more

Implementing A Proactive Push Scheme Based On The Http / 2...
The first paper proposed a proactive push scheme based on the HTTP/2 server–push feature, the
second paper, on the other hand, improved the push method from fixed numbers into adaptive
numbers based on multiple factors.
In this section, we will compare two outstanding papers with different parameters in the following
four metrics:
(a) Number of requests
The definition of number of requests is the total number of HTTP requests sent by the client during
the streaming of the video. This metric measures the protocol overhead generated on the network.
Before HTTP/2, each packet required by the client needs a separate HTTP request sent from client
to server. The server will then send the HTTP response with the video segment as the payload. With
HTTP/2, the it is not needed any more that the client sends a new request for each segment. The
server will push the subsequent segments to the clients and therefore reduce the overhead to the
network. So, we expect an as lowest as possible number of this metric.
From the experiment results of the two selected paper, we can get the data of number of requests as
follows, methods metrics
Method of [3]
Method of [4]
N = 1
N = 2
N = 3
N = 4 a=0.6 A=0.4
Number of request
1000
500
334
250
518
383
Figure 9. The comparison of number of requests for methods [3] and [4]
The parameter 'N' in the method of [3] means the number of segments to be pushed to the client
each time.
The parameter 'a' in the method of [4] is the key coefficient of the

Work Study And Observation Of The Methods Of Carrying Out...
WORK STUDY & OBSERVATION
5.1) WORK STUDY:–
Work study is a term for techniques, particularly method study and time study, which are used for
the examination of human work in all its contexts, and which lead systematically to investigation of
all the factors which affect the efficiency and economy of the situation being reviewed, in order to
seek Improvement in performance & productivity.
Work study analyzes the work done in an organization and aims at finding the best and the most
efficient way of utilizing the available resources (man, material, money and machinery to achieve
best possible quality work in minimum possible time.
Work Study is the systematic examination of the methods of carrying out activities such as to
improve the effective use of resources and to set up standards of performance for the activities
carried out.
With the help of the work study technique we can analyze the whole process, identify the
unnecessary movements & process which we can reduce or eliminate. Work study normally
involves, a) Method study, b) Time study,
Fig 5.1 WORK STUDY [12]
5.2) METHOD STUDY:–
Method Study is the systematic recording technique and critical examination of existing and
proposed ways of doing work & process, as a means of developing and applying easier and more
efficient way and reducing costs.Method study is the process of subjecting work to systematic,
critical observation to make it more effective and/or more

The Invention Of The Modern World
In almost every scientific discipline, complex, specialised instrumentation has been considered
important, if not integral to scientific development. As the scientific developed and professionalised,
instrumentation integrated yet further into the social routine of formal laboratory work and,
arguably, became endemic within the fabric of everyday late industrial life1. This state of affairs has
persisted since at least the late nineteenth century2. In some cases, instrumentation has almost
subsumed the individual scientist within historical narrative. It is impossible to imagine classic
depictions of the great 'myth ' of Galileo without the obligatory appearance of at least one of his
telescopes3, or a sketch of Newton without his refracting prism. Celebration of material apparatus
has been an enduring theme, particularly in more poplar depictions of the "process" of scientific
progress. Today, the seemingly incomprehensibly complex microscope or (now orbital) telescope
are still instantly recognisable, as visual shorthand for the sharpest points within the material
armoury of the scientist. It is therefore undeniable that from the genesis of Western modernity in the
sixteenth century there has been a near obsession with developing, enhancing and portraying devices
of observation, measurement and quantification. Yet the literary examination and incorporation of
scientific instruments into narrative and displays of physical heritage has been a convoluted and (at
times)

Marketing Pl The Garmin Approach
Marketing Plan
Overview
The Garmin Approach series of products has created a name for Garmin in the golf community. The
traditional golf GPS delivers distanced to the front back and center of the green. Lower handicap
golfers are looking to get precise distances directly to the flagstick at any one of the different pin
positions. To break into the golf LRF market we need to do more than just make a "me too" product.
We need to combine our GPS and golf course cartography with a LRF to offer a new and better
experience for LRF users that doesn 't sacrifice the accuracy to the pin.
The Approach Z80 will revolutionize electronic measuring devices by merging both the
functionality and form factor. The Approach Z80 will be a direct competitor with the leading LRFs
in the industry that have singular capability of only providing distance to one item. In order to
impact the competition, we will need to have a clear communication highlighting the additional
features and capabilities of the Approach Z80. This product will be the first of its kind for Garmin in
the golf market. The primary message will need to be that we have the distances to everything on the
course at a glance.
Web Presence
Mini–Site: We will not be creating a mini–site for the Approach X80 rangefinder.
Product Landing Page: We will need to update the existing golf landing page. We will have a third
segment of the page highlighting the capabilities with visuals for the rangefinders, similar to that has
been

Persuasive Essay: Why Kids Should Be Safe In Schools
Kids should be safe in schools. Recently, people have taken their anger out on kids in school. This
causes kids to not be safe in schools. This is usually unexpected. People are hurting innocent kids
because they have their own anger. We need to add an metal detector for all of all of the schools
around the world an they need guards in the schools that they will help kids in the school that they
need help from bad people in the world.
We need to buy some guns for some of the teachers in the schools that they want or no want to have
them to help the kids with beautician for the kids in the other kids in the other school. We need to
add to the doors motions to the doors that we would now that the bad people are in the schools that

Measuring Instruments, Empirical Data And The Technical...
4.5 Result interpretation As part of the empirical study, we started off with deciding the research
methodology, measuring instruments, empirical data for the products chosen to compare, followed
by the comparisons on business values, functionalities and the technical aspects of the CRM
products along with the approaches with an opinion on each topic during comparisons. This section
is dedicated to interpret the results for the 2 products Siebel and Salesforce.com. From a business
perspective, there exists a significant difference exists between two CRM applications – Siebel and
Salesforce.com in terms of Total Cost of Ownership (TCO). As shown in table 5.4.1, our analysis is
based on 50 users using both ASP products equates to saving of ... Show more content on
Helpwriting.net ...
Salesforce.com offers force.com as a platform as a service where any enterprise can customize the
application in their own fashion, the development times and costs would increase to suit their
business needs. Siebel CRM started out their first product on Sales force automation and has
pioneered the features it offers, and call center or customer service the most popular module. Siebel
offers customized products for all industries like Consumer goods, Healthcare, Financial, Insurance,
Automotive and several others as documented on the ASP's website. The comparison results for the
functional requirements for CRM products will be scored According to the scoring range values as
1= Not Available/unknown; 2= slightly support; 3=support; 4= strongly support/ extra capabilities
CRM functionality Siebel Salesforce.com Sales Functions Contact Management 4 4 Account
Management 4 4 Lead Management 4 4 Opportunity Management 4 4 Territory Management 4 4
Sales Forecasting and report 4 4 Sub Total (Percentage) 24 24 Marketing Functions Campaign
Management 4 4 Direct Mail Management 3 3 Email Management 4 3 Content Management 3 3
Sub Total (Percentage) 14 13 Customer Service functions Customer Dashboard 4 4 Customer
Management 4 4 CTI 3 3 Household Management 4 3 Workflow Management 4 3 Sub Total
(Percentage) 19 17 Grand Total 57 54 Table 4.4: The result of functionality comparison.

The Use Of Metal Detectors In School Shootings
School shootings have been on the rise in the United States since the early 80's, questioning the
safety and security of schools all across the country. Lots of ideas have come up for trying to keep
weapons out of schools but the idea of having metal detectors has stuck and on paper seems to be a
viable option for schools but in real use they have lots of issues. One of the biggest problems with
using metal detectors in public schools will be cost. Cost affects many different things to do with the
metal detectors, two of the major factors being proper trained staff and paying for repairs. Another
issue with metal detectors are they are slow, make kids late to class and also make kids dread going
to school in the morning. There could be compromises made like alternative options like random
checks or quick pat downs but getting rid of this style of security would be better all together. Metal
detectors should not be used in schools because they make students late to class, cause anxiety and
are too expensive to be used in public schools. Metal detectors are making kids tired and late to
class because the process is so lengthy. Ms. Dunley, a teacher who works at a school where metal
detectors are being used says "She marks several people late everyday because they are being held
up by the metal detector". The time that is being consumed by the metal detectors not only wastes
class time but kids have to arrive hours before school to wait in line to get passed the metal

Sl 2 Thermometer
Discussion
The results of this lab helped determine which tools are best to measure different objects. In Station
1, a yellow metric ruler, an orange metric ruler, a wooden ruler, and a measuring tape was used. The
tool with the highest degree certainty was the orange metric ruler. This is because the orange ruler
had tick marks for each 10th(0.1). The tool with the lowest degree of certainty was the measuring
tape because it kept moving and it was difficult to keep it straight. For Station 2, a wall clock, a
digital stopwatch, and a timer was used. The tool that had the most accurate measurement was the
digital stopwatch because it measured into the 10th(0.1) place automatically. The tool that was least
accurate was the wall clock because ... Show more content on Helpwriting.net ...
The tool with the highest degree of certainty was the non–mercury thermometer because it didn't
have to be calibrated and there were tick marks to make the measurement more accurate. The tool
that had the smallest degree of certainty was the dial 2 thermometer because it very wide. This
caused the measurement to be harder to make. In Station 4, a spring scale, an electric balance, an
analytic balance, and a one pay balance was used. The most accurate tool was electric balance
because no calculations or estimations needed to be made. The least accurate tool was the spring
scale because the scale kept moving and block couldn't be measured without a basket carrying it,
making the measurement inaccurate. In Station 5, a graduated cylinder, a beaker, and an Erlenmeyer
flask was used. The tool that had the highest degree of certainty was the graduated cylinder because
there were more ticks. This made the measurement more accurate because the water level was closer
to the markings. The least accurate tool was the Erlenmeyer flask because the spaces between the
markings were large so the whole number had to be guesstimated. In station 6, #1 was accurate
because the X's exactly on the lines. #2 was precise because multiple X's were close to

Smoking Vs Grilling Research
If you want to become a grilling expert, it is important to learn about the two main ways to cook
over an open flame: smoking and grilling. What are their main differences? Is the flavor from one
different from the flavor from the other? We will consider these questions and more as we look at
smoking vs. grilling. What is the difference between smoking and grilling?
Smoking is an ancient method of preserving meats using smoke, indirect heat and low cooking
temperatures. The original reason for using this method had more to do with preserving the meat
than with flavor. These days, it is used mostly for the flavor and for making meat tender by breaking
down the connective tissue in it. Properly smoked meats acquire a smoke ring. This term refers to
the layer of meat just beneath the exterior. It is especially visible in ... Show more content on
Helpwriting.net ...
Whereas the heat used to smoke meat is indirect and low, the heat used for grilling is direct and
high. Grilling is not so much about breaking down collagen and making meat tender as it is about
caramelizing the exterior and sealing in juices to keep the interior moist. What about taste?
The flavor of grilled meat versus the flavor slow–smoked meat is the basis of yet another big
culinary debate. Many chefs believe that the flavor of slow–smoked meat is superior to that of
grilled meat; however, it is possible to have best of both worlds with the use of wood chips or wood
chunks. The ideal wood for smoking is thought to come from certain species of fruit or nut trees.
Apple, peach and pecan woods are all thought to be excellent for slow–smoking meats. Can you get
a smoky flavor from grilling?
Yes, you can. One of the easiest ways to do this with a charcoal grilling is to add wood chips.
Simply toss a handful of chips onto your smoldering coals to create smoke that will flavor your
meat. You can also mix chunks of wood in with the coals to smoke meat for longer

Investigating How Do Different Paper Cups Affect An...
Problem: How do different material cups such as, plastic, paper, and styrofoam cups affect an
anemometers speed? Styrofoam Cups Styrofoam is known as plastic #6 or PS (Polystyrene).
Styrofoam was first used in 1941 when Dow's Chemical Physics Lab found a way to make foamed
polystyrene. Styrofoam starts out as little pellets. These pellets are about 1 millimeter big and will
go through a heating and cooling process, expanding the pellet 40 – 50 times its size. Styrofoam is
usually used to make plates, cups, bowls, packing peanuts, and package holders. Styrofoam is bad
for the environment since it's not biodegradable and is an "Eco Enemy. Paper Cups Paper cups are a
disposable cup made out of thin sheets of wood or as people today usually know it as... paper. Paper
cups are usually lined with wax or plastic to keep the liquids on the inside from spilling. Cups of
paper were first used around 1907 and were produced by Dixie Cup. Paper cups are made from
wood chips turned into pulp. The Royal Society of Chemistry estimates 33 grams of wood go into
each cup. Paper cups are biodegradable and can be recycled. Plastic Cups ... Show more content on
Helpwriting.net ...
Plastic cups are made by a process called injection molding. The PET is mixed as a liquid, put into
cup shaped molds, then cooled and solidified. Plastic cups date back to the 1960s, and would be
used at professional sporting games, picnics, and different areas in the house like the bathroom. The
company, Dixie Cups, made plastic cups. Before plastic cups were invented, people would use
barrels of water. Those people would use their own cups causing lots of cross contamination
between germs on the cups, in the water, or germs on the

Accuracy And Precision Lab
In this experiment, accuracy and precision were measured through the density of water (H2O).
Accuracy is defined by how close the result comes to the true value. Precision refers to how close
two or more measurement are to each other. A volumetric flask, graduated cylinder, pipet, and buret
were used to measure the water. A balance was used to measure the grams of each trail. Ten
milliliter was the volume of the H2O that was used for each trial. Two trials of each equipment was
done. Each trial measurement had three significant figures. For every time that the scale was
introduced to one of the four different instruments, the scale is zeroed out with nothing on the scale,
then the empty piece of equipment was placed on the balance, and the ... Show more content on
Helpwriting.net ...
After recording the weight, the same was done for trial two. The flask was then used. Making sure
that the scale was zeroed out, the empty flask was place on the scale and the tare button was pushed.
Ten milliliter was measured into the flask and placed on the scale. The grams of the trial was
recorded. Trial two was done the same way as trial one. The third equipment that was used was the
pipet. Confirming again that the balance was zeroed out. The cylinder is placed on the balance and
the tare button was pushed because the instrument was used to hold the water from the pipet. The
pipet could only hold a certain amount of liquid. One milliliter was the amount transferred ten times
in the cylinder to get a total of ten milliliter, from which we got from a flask that had H2O. Trial two
is done the same way. The last glassware measured was the buret. An empty graduated cylinder was
placed on the zeroed out scale and the tare button was pushed again. The cylinder was then placed
under the buret for water that flowed out from the buret. Water was drained into the cylinder and ten
milliliters was measured and weighed on balance. Trial two was done the same way. After finishing
the experiment, the density is measured for each individual

Oil And Gas Industry During The 19th Century Industrial...
In the old days, instrumentation and measurements were needed only in the transfer of goods and for
consistency of the exchanges. The 19th century industrial revolution brought much development in
instrumentation to serve the industrial needs of process variables measurement. The last few years of
the 20th century (because of the new innovations and development in electronics) resulted in new
instruments and measurement techniques, which are implemented in the oil and gas industry.
Instrumentation and measurement are very essential in oil and gas upstream, midstream, and
downstream. Upstream refers to the exploration of both underground and underwater crude oil and
natural gas fields, as well as drilling of exploratory wells, and ... Show more content on
Helpwriting.net ...
There are two methods used to measure level of liquid; direct methods and indirect methods. Direct
methods of level measurement measures the height above a zero point by different methods. By
definition, direct methods for level measurement are mainly used where level changes are small and
slow such as in sump tanks and bulk storage tanks, this method actual level is monitored. It is simple
to use and reliable and not costly. These methods are safe because they are suitable to hazardous
areas. So they are highly recommended in oil and gas level measurement. There are four types of
direct level measurement devices. The 1st is the Dipstick and Dip–Rods: Is a method that has been
around for hundreds of years. Our ancestors used to insert a long pole into a river or canal then pull
it out and the wetted part was used to determine the depth. Today they do the same thing but with a
long metal rod that has been dipped into a vessel. The rod is stopped either at the top of the vessel
by a protruding flange on the rod, or at the bottom of the vessel when the tip of the rod reaches the
bottom. When the rod is withdrawn, the wet/dry interface can be clearly seen and the level
determined from a scale on the rod (Image 2). The 2nd is Weighted Gauge Tape: similar to the
dipstick the weighted gauge tape is used in deep vessels and tanks where the dipstick cannot reach
(Image 3). The 3rd is Gauge Glasses: the

Basic Skills And Vocabulary Review
FCS 201L – Introductory Food Science Laboratory
Basic Skills and Vocabulary Review
What is the difference between wax paper and parchment paper? Provide an example of when and
why you would use each one? The main difference between the wax paper and the parchment paper
is their coating which dictates their use.Wax paper is coated with waxy materials such as soybean or
paraffin while parchment paper is coated with either silicone or quilon.
The coating of the parchment paper makes it non–stick and heat resistant which allow it to be ideal
for any cooking methods that involves heat such as baking. It could be used to line pans or baking
trays. It could also be reused which makes it more economical and practical to purchase.
Meanwhile, the wax paper is best used for any activities that would only require room and/or cooler
temperature. Its waxy covering allows it to be non–stick and prevent the loss of moisture of foods. It
is usually used for wrapping foods and for lining up trays when making foods that would be meant
for refrigeration. It could also be placed in countertops to reduce the mess while baking or cooking.
It is also disposable.
You open a can of tomatoes, but only use ½ of the can. Explain how you would store the rest of the
tomatoes. The USDA FSIS suggests that any leftovers from opened canned goods must immediately
be transferred to an air–tight plastic or glass container and placed inside the refrigerator.
You open a can of condensed milk, but only

When Childrens Knowledge Of Memory Improves Children's...
The authors, Marie Geurten, Corinne Catale, and Thierry Meulemans, of When Children's
Knowledge of Memory Improves Children's Performance in Memory were primarily interested in
find a better way for children to communicate what they understand about their own metamemory.
Before this study, metamemory in adults was studied extensively but due to children's lack of ability
to assess their own memory this area little research or appropriate measuring tools exist for children.
With adults, it is appropriate to use direct methods to measure memory capacity, internal and
external strategies, and factors that affect memory. In a previous studies, problematic screenplays
were used to measure children's metamemory. But these studies underestimated ... Show more
content on Helpwriting.net ...
The way the children's responses were recorded was adapted so that knowledge of internal strategy,
knowledge of external strategy and knowledge of general memory function could be measured. The
answers were recorded so that they could be scored by independent evaluator. In the second study,
128 children were picked from the first phase. The children were given a clustering recall test,
basically twelve words that they were asked to recall. They were also asked to remember them by
category. This created two clustering ratios, a semantic one and a serial clustering ratio. This was a
free recall test. The results for the combined study after the data was analyzed indicate that the
hypothesis is correct for the three–factor model and developmental stability was present. Factors in
children's metamemory were revealed for the first time showing that there are multiple constructs
rather than a unitary construct. The children were using different kinds of knowledge as they
performed the tasks given them in the study. The three–factor scale is a helpful tool that can be used
to evaluate metamemory throughout childhood with reliability.
In this experimental study, the authors made progress on the study and scientific understanding of
children's development of metamemory. They measured the children's knowledge of internal
strategy, knowledge of external strategy, and knowledge of general memory function.

Paper Towel Absorbency Experiment
I believe that Walmart brand paper towels are just as absorbent as Bounty brand paper towels. All
paper towels are made from paper pulp that is woven to create a large sheet. Because all paper
towels are made from the same material I believe that the Walmart brand will absorb just as much
liquid as the other brands. I will prove my hypothesis through a scientific experiment comparing
three brands of paper towels. I chose three brands with three very different price points. Am I paying
more money per roll for a higher quality towel or are all paper towels made the same, therefore will
absorb equal amounts of liquid. I will put each paper towel brand through an absorbency test 4 times
to get an average amount of liquid absorbed. I am ... Show more content on Helpwriting.net ...
If the towels are different sizes trim them to the smallest size. 3. Fill a liquid measuring cup with
100mils of water. 4. Submerge the first brand of paper towel into water and start the stopwatch. At
20 seconds remove the paper towel from the water and squeeze the paper towel into the second
liquid measuring cup. 5. Record how much water was squeezed from the paper towel. 6. Repeat
with each brand of towel and record the data. Repeat each set of trials at least four times for
consistency of data. 7. Find the average amount of liquid absorbed by each brand of towel and plot
in a bar graph.
My experimental design is set up in such a way that anyone can replicate this experiment with the
same brands of towels and get the same results. My plan keeps the trials as fair as possible by
cutting the towels down to the same size so only the thickness of each towel comes into play. It is
important to conduct multiple trials to insure the data is consistent.
The Dependent variable for this study is the amount of water absorbed by the paper towels. This will
be measured in milliliters. The independent variable for this study is different brands of paper
towels. The controlled variables will be the amount of water the paper towels are given to absorb,
the size of the paper towels at the beginning of the experiment, and using the same measuring
instruments in each trial. I will reduce the threat to internal validity by conducting the experiments
in the

Standardized Assessment Is The Only Instrument For...
Standardized testing has been used in the American higher education platforms to assess student
achievement at individual,classroom,instructor,school,region, district,state and national levels.The
results obtained from standardized tests have provided all parties with information regarding the
direction of education and provide catalysts for improvement.Arguments concerning the merits of
standardized assessments as a measure of college and university effectiveness have been around
since time immemorial.Amidst these arguments,a number of policy makers and professionals in the
field of education most importantly agree that standardized assessment should not be the only
instrument for measuring student learning outcomes that institutions ... Show more content on
Helpwriting.net ...
29)
Nichols et al. cites that the problem of using standardized assessment in higher education is deeper
than the few benefits that come with it. Institutional effectiveness has continued to be measured by
inputs mostly in terms of financial resources, and the academic qualifications of students before they
are enrolled into the institutions of higher learning. Once the students qualify to join these
institutions, they are exposed to a series of standardized tests which are used to measure their
academic outcomes (30). One evident fact however is the fact that standardized tests cannot be used
to quantify student outcomes. When it comes to measuring essential qualities such as creativity,
intellectual integrity, personal self–delivery, tolerance, wisdom, refinement of taste and conduct, and
psychological well–being, then standardized tests almost prove useless in the realms of higher
education.
Nichols et al. writes that standardized testing in higher learning is likely to create an atmosphere of
hyper

Ruler Drop Test Essay
The ruler drop test is used to measure a person's reaction time. Which is the time taken for an athlete
to react to a stimulus or an event.
The equipment needed to measure this is a 1–meter long ruler and a calculator.
The person to be tested stands near the edge of a table, resting their elbow on the table so that their
wrist is extended over the side. The assessor holds the ruler vertically in the air between the index
finger and thumb of the subject, but not touching. The zero mark should be lined by to the finger and
thumb. The subject should indicate that they are ready to the assessor. Without warning, release the
ruler and let it drop – the subject must catch it as quickly as possible as soon as they see it fall.
Record in meters ... Show more content on Helpwriting.net ...
for example, if the opponent makes an advance on them if any physical way, the subject would need
to be able to move quick and make a decision on how to address the situation and defeat their
opponent.
The positives of this test are that it is very simplistic and can be conducted at any given time, with a
very small amount of equipment needed for this to be set up. Also, this test would not take long to
carry out.
However, an assistant is always needed as the ruler would need to be dropped by another person, so
the action would be sudden to make the results valid, and this test is not very valid as it can be seen
as too simplistic to accurately calculate the reaction time of an individual.
My result:7.4cm
After completing this test, my result showed that I had an excellent reaction towards a stimulus, and
would be very suitable for sports that would require me to react quickly, for example baseball would
be a suitable sport for me as I could react quickly when batting as once the ball has been bowled, I
would only have a short period of time to bat without getting a strike. if I began to play baseball, and
trained regularly I would be able to maintain a score that would stay in the excellent category.
However, if I did not train in this specific area, these results would decrease if this test was taken

4G Long Term Evolution Case Analysis
Abstract
Telecommunication technologies have evolved rapidly over the past decades, a situation which led
to the arrival of the 4G Long Term Evolution (LTE) to provide faster data speed better than the
legacy 3G EVDO data technology. Certainly, LTE has been of great benefit to both individuals and
corporations across the globe. However, operators are often faced with challenges such us Capacity
constraints, slow throughput due to increased numbers of usage, interference from other wireless
equipment, as well as poor coverage issues.
Over the years, telecommunication operators have been adopting strategies to mitigate all these
challenges in order to improve user experience. This research focused specifically on the
optimization of the ... Show more content on Helpwriting.net ...
It is also believed that the common issues that occur in the LTE network could be reduced
drastically if attention if given to certain engineering practices. The research revealed and discussed
some of those factors.
Furthermore, to understand the concept of LTE optimization in the practical sense, a case study was
done with drive test data collected on Nex–tech wireless network and a detailed analysis was made
and some issues were identified and rectified in the network.
By and large, the findings from the research and the deductions from the case study only proved that
there is a tremendous benefit in adopting a quality optimization strategy in any LTE network. More
so, not only do the subscribers get great quality of service but the operators also make maximum
financial gains.
Introduction
LTE network optimization remains an integral part of the LTE network. The main objective of
optimizing the LTE network is to ensure that (Ue) has good service which translates to good user
experience such as high data speed. The LTE optimization approach usually follows a process.
Optimization engineers follow this process to find out where the problems in the network are as well
as identifying what the problems are and then subsequently proposing ways to resolving them.
The first stage of the process is data collection where very sophisticated tools and

Testing In Hospital Resuscitation
The primary research question of the study was "does testing as a final activity, in an in–hospital
resuscitation skills course, increase learning outcome compared with an equal amount of time spent
practicing?" (Kromann et al., 22). The primary independent variable for this study was the type of
final activity. This includes both the testing as the final activity and the equal time practicing as the
final activity. The IV was operationalized through two groups, a control group and an intervention
group. The control group and the intervention group were identical until the last thirty minutes.
During the last thirty minutes the intervention group each participant was tested individually, while
during the last thirty minutes of the control group the participants ran through a few scenarios. The
primary dependent variable was the assessment scores of a 25–item checklist. The DV was
operationalized through a 25–item checklist that was inspired by the Advanced Life Support Cardiac
Arrest Scenario Test. The participants were asset two weeks after the course had finished. The
participants were 140 ... Show more content on Helpwriting.net ...
The study states that it believes that testing in the intervention group will cause those participants to
do better than those in the control group. This turned out to be the case and why the study
established temporal precedence. The effect the two different groups had was due to them either
being tested for the last thirty minutes or not being tested. So, this means that the causal variable
came before the outcome which was different scores based on testing or not testing. I don't think
there is a third–variable problem. This is because the experiment left little room for the participants
to apply anything that could be considered a third–variable like having more knowledge. But, all the
participants had the same amount of learning in the medical fields and they all had the same amount
of time to prepare for the

Essay on moral compass
In my past 18 years, I have been living in an environment that people telling me what should I do
and what should I not to do. My mum taught me to be a good role model for my younger sister, my
dad told me to study hard so I can have a good future. By going to school, teachers teach me that
what is 'right' and 'wrong' from the textbook and I have also been learning that from the TV,
newspaper and radio. The mass media is always a channel for me to receive what is 'right' and
'wrong' about the social. For example, there are critics about the politics, environmental issues
etc.From time to time, my moral compass had been shaped by my parents and the social norms.
Human beings always place their own interest on the top priority while ... Show more content on
Helpwriting.net ...
Now, I have to behave well in front of my sister. My moral compass tells me what to do as a good
sister and this always stop me from what I really want to do in my heart. It upsets me because 'role
model' has become a burden for me to do something I really like. For example, I would like to learn
street dance but my mother rejected it with not to affect adversely on my sister. She thought that I
should put more effort on studying but not something which is not related to academic. In school, I
am the pianist of the school choir and I am responsible for the playing the piano part in different
occasion. When I was in form 1, I was told to be the pianist for the Speech Day and it really affected
my life in secondary school a lot. Since all the pianists playing in Speech Day were in Form 5
before, I became the youngest pianist ever in my school. People questioned why I can stand on the
stage because they think I am not qualified for that. I would like to do my best every time on stage
so that people would agree with me and understand the effort that I have paid. As a result, I have
tremendous pressure as my moral compass tells me to perform well before going out to perform as
there are a lot of people looking at me and I would want to show them I am excellent player.
Moral compass is easily affected by others. I am a person always get lost although I know

Measuring The Volume And Mass Of A Cylinder, A Sphere And...
Objective This experiment will involve measuring the volume and mass of a cylinder, a sphere and a
wooden block. Based on the mass and volumes of these objects, the density of these objects can be
calculated. The equation for the density of an object is density =mass/volume. In the density
equation there is a direct proportional relationship between the mass of an object and its volume. For
instance, if an object has its mass decreased, its volume will also decrease.
The experiment used a Vernier caliper to measure the height and the diameter of a cylinder. A
Vernier caliper was also used to measure the diameter of the sphere. A meter stick was used to
measure the length, width, and height of the wooden block. The precision of an instrument such as a
Vernier caliper or a meter stick determines how many significant figures the data is presented in.
The mass of the objects being tested will be measured using an electronic balance. The equations
used in this experiment to determine the volumes were the volume of the cylinder: πr2h; volume of
the block: (length)*(width)*(height); and the volume of the sphere: (4π/3) (r3). The volumes of
these objects will be divided by their respective masses to determine the density of each object.
The final part of the experiment will involve using a micrometer caliper to estimate how many pages
are present in the physics lab manual. Accuracy in this experiment will be seen when the calculated
density of the various objects in

Essay about Lab 1-Measurement, Length, Mass, Volume,...
GS104
Lab Report
Experiment # 1
Measurement, Length, Mass, Volume,
Density & Time
David Case:
January 17, 2015
Experiment #1
Measurement, Length, Mass, Volume, Density, & Time
Objectives:
To make basic distance, mass, density, and time measurements.
To make calculations of volume and density, using proper units, and to practice using graphing
software while graphing the relationship between the circumference of a circle and its diameter.
Materials: stopwatch meter tape 3 rectangular objects metric ruler pencils metal bolt 500‐G scale
graduated cylinder five circular objects
Lab Notes: 1. Estimation of Various ... Show more content on Helpwriting.net ...
By having the length, width, and height measurements off by a little, the volume would be off by a
huge amount. A small error in the hand measurements would grow by leaps and bounds in
measuring volume. 3. Graphing data and the determination of π In this experiment, I measured 5
round objects of varying sizes. The objects I selected are a cup, a bowl, a soda can, a babies rattle, a
CD.
Object
Diameter (cm)
Circumference (cm)
Cup
7
22
Bowl
14
48
Can

6
21
Rattle
5
18
CD
12
38
Question: What is the slope of "C vs d" line? What does it represent? The slope of the "C vs d" line,
according to the above graph, is 3.2548. This represents a ratio between the circumference and the
diameter of a round object. Being that I used imprecise measuring devices my measurements are a
little off. Although my ratio seems consistent in my graph. With a more accurate measuring device
my measurement would be closer to π.
G. Percentage error formula: Percentage error = π = 3.14 Estimate = 3.2548 3.14–3.2548/3.14 = ‐
0.0365 x ‐1 = 0.0365 x 100% = 3.65% My percent of error is 3.65%. 4 Density Measurements:
determine the density of a metal bolt by water‐displacement method:
A, B & C: For this experiment first I weighed a metal bolt using a digital scale, getting a weight of
7.8 g. Then I filled the graduated cylinder with water to 10–mL. Next I placed the metal bolt into the
cylinder and recorded the new volume. This reading was 12–mL.

Case Study Of Vanilla Rum Apple Butter

Recommended

Recommended

More Related Content

Similar to Case Study Of Vanilla Rum Apple Butter

Similar to Case Study Of Vanilla Rum Apple Butter (14)

More from Katy Allen

More from Katy Allen (20)

Recently uploaded

Recently uploaded (20)

Case Study Of Vanilla Rum Apple Butter