serial communication, parallel communication, SPI and ADCs. Write .pdf

•

0 likes•2 views

J

jyothimuppasani1

serial communication, parallel communication, SPI and ADC\'s. Write a paragraph about serial communication and how ADC\'s work. Solution Serial Communication: Serial Communication is process of sending data one by one at a time over a communication channel. Parallel communication: Parallel Communication is method of conveying multiple bits at a time over a communication channel. Serial Peripheral Interface: This is used to send data between microcontrollers and small peripherals. It uses clocks and data lines along with a select line to choose the device we wish to talk to. ADC working: ADC takes input signal as analog signal. It uses a circuit which converts this analog signal to appropriate digital signal. You can refer to wikipedia or any other links for the circuit which converts analog signal to digital signal..

serial communication, parallel communication, SPI and ADC's. Write a paragraph about serial
communication and how ADC's work.
Solution
Serial Communication:
Serial Communication is process of sending data one by one at a time over a communication
channel.
Parallel communication:
Parallel Communication is method of conveying multiple bits at a time over a communication
channel.
Serial Peripheral Interface: This is used to send data between microcontrollers and small
peripherals. It uses clocks and data lines along with a select line to choose the device we wish to
talk to.
ADC working:
ADC takes input signal as analog signal. It uses a circuit which converts this analog signal to
appropriate digital signal. You can refer to wikipedia or any other links for the circuit which
converts analog signal to digital signal.

More Related Content

Similar to serial communication, parallel communication, SPI and ADCs. Write .pdf

86919253 data-acquisition-system-ppt

86919253 data-acquisition-system-ppt

86919253 data-acquisition-system-ppt

GovindaChandraBehera1

Interfacing to the analog world

Interfacing to the analog world

Interfacing to the analog world

Introduction to digital signal processing 2

Introduction to digital signal processing 2

Introduction to digital signal processing 2

Ad and da convertor

Ad and da convertor

Ad and da convertor

analog to digital adn digital to analog .ppt

analog to digital adn digital to analog .ppt

analog to digital adn digital to analog .ppt

daredevil15082004

Ad and da convertor

Ad and da convertor

Ad and da convertor

Data Acquisition System, a side for Electrical Engg.

Data Acquisition System, a side for Electrical Engg.

Data Acquisition System, a side for Electrical Engg.

Analog to digital converter

Analog to digital converter

Analog to digital converter

Poornima institute of engineering and technology

Analog to digital converter

Analog to digital converter

Analog to digital converter

Poornima institute of engineering and technology

Elet 4315 homework 2

Elet 4315 homework 2

Elet 4315 homework 2

Analog-to-digital converters (ADCs) are key design blocks and are currently adopted in many application fields to improve digital systems, which achieve superior performances with respect to analog solutions. Application such as wireless communication and digital audio and video have created the need for costeffective data converters that will achieve higher speed and resolution. Widespread usage confers great importance to the design activities, which nowadays largely contributes to the production cost in integrated circuit devices (ICs). Various examples of ADC applications can be found in data acquisition systems, measurement systems and digital communication systems also imaging, instrumentation systems. Since the ADC has a continuous, infinite –valued signal as its input, the important analog points on the transfer curve x-axis for an ADC are the ones that corresponding to changes in the digital output word. These input transitions determine the amount of INL and DNL associated with the converter. Hence, we have to considered all the parameters and improving the associated performance may significantly reduce the industrial cost of an ADC manufacturing process and improved the resolution and design specially power consumption . The paper presents a design of 4 bit Pipeline ADC with low power dissipation implemented in <0.18µm.

VLSI Design of Low Power High Speed 4 Bit Resolution Pipeline ADC In Submicro...

VLSI Design of Low Power High Speed 4 Bit Resolution Pipeline ADC In Submicro...

VLSI Design of Low Power High Speed 4 Bit Resolution Pipeline ADC In Submicro...

Analog-to-digital converters (ADCs) are key design blocks and are currently adopted in many application fields to improve digital systems, which achieve superior performances with respect to analog solutions. Application such as wireless communication and digital audio and video have created the need for costeffective data converters that will achieve higher speed and resolution. Widespread usage confers great importance to the design activities, which nowadays largely contributes to the production cost in integrated circuit devices (ICs). Various examples of ADC applications can be found in data acquisition systems, measurement systems and digital communication systems also imaging, instrumentation systems. Since the ADC has a continuous, infinite –valued signal as its input, the important analog points on the transfer curve x-axis for an ADC are the ones that corresponding to changes in the digital output word. These input transitions determine the amount of INL and DNL associated with the converter. Hence, we have to considered all the parameters and improving the associated performance may significantly reduce the industrial cost of an ADC manufacturing process and improved the resolution and design specially power consumption . The paper presents a design of 4 bit Pipeline ADC with low power dissipation mplemented in <0.18µm.

VLSI Design of Low Power High Speed 4 Bit Resolution Pipeline ADC In Submicro...

VLSI Design of Low Power High Speed 4 Bit Resolution Pipeline ADC In Submicro...

VLSI Design of Low Power High Speed 4 Bit Resolution Pipeline ADC In Submicro...

Vlsics08

DATA ACQUISITION (DAQ) IN LABVIEW

DATA ACQUISITION (DAQ) IN LABVIEW

DATA ACQUISITION (DAQ) IN LABVIEW

ADC - Types (Analog to Digital Converter)

ADC - Types (Analog to Digital Converter)

ADC - Types (Analog to Digital Converter)

National Engineering College

Wireless Sensor Network

Wireless Sensor Network

Wireless Sensor Network

Shubhi Singh chauhan

The need to have a visual perception of signals in order to monitor events in time and value brought about the development of a measuring instrument referred to as oscilloscope. This is a design of handy and low cost oscilloscope. The user can start/stop the display, adjust the time division and adjust the voltage division. The requirements of the oscilloscope were three-fold: 1) low cost design, 2) capture frequencies at the medium range and 3) construct able with a basic skill of PCB designing.

ARM Based Handy and Portable Oscilloscope Using Graphical Display

ARM Based Handy and Portable Oscilloscope Using Graphical Display

ARM Based Handy and Portable Oscilloscope Using Graphical Display

Assignment 2

MahfujurRahman63

3 STM32's ADC.ppt

3 STM32's ADC.ppt

3 STM32's ADC.ppt

Microprocesser

فرخ شعیب

Similar to serial communication, parallel communication, SPI and ADCs. Write .pdf (20)

86919253 data-acquisition-system-ppt

86919253 data-acquisition-system-ppt

86919253 data-acquisition-system-ppt

Interfacing to the analog world

Interfacing to the analog world

Interfacing to the analog world

Introduction to digital signal processing 2

Introduction to digital signal processing 2

Introduction to digital signal processing 2

Ad and da convertor

Ad and da convertor

Ad and da convertor

analog to digital adn digital to analog .ppt

analog to digital adn digital to analog .ppt

analog to digital adn digital to analog .ppt

Ad and da convertor

Ad and da convertor

Ad and da convertor

Data Acquisition System, a side for Electrical Engg.

Data Acquisition System, a side for Electrical Engg.

Data Acquisition System, a side for Electrical Engg.

Analog to digital converter

Analog to digital converter

Analog to digital converter

Analog to digital converter

Analog to digital converter

Analog to digital converter

Elet 4315 homework 2

Elet 4315 homework 2

Elet 4315 homework 2

VLSI Design of Low Power High Speed 4 Bit Resolution Pipeline ADC In Submicro...

VLSI Design of Low Power High Speed 4 Bit Resolution Pipeline ADC In Submicro...

VLSI Design of Low Power High Speed 4 Bit Resolution Pipeline ADC In Submicro...

VLSI Design of Low Power High Speed 4 Bit Resolution Pipeline ADC In Submicro...

VLSI Design of Low Power High Speed 4 Bit Resolution Pipeline ADC In Submicro...

VLSI Design of Low Power High Speed 4 Bit Resolution Pipeline ADC In Submicro...

Vlsics08

DATA ACQUISITION (DAQ) IN LABVIEW

DATA ACQUISITION (DAQ) IN LABVIEW

DATA ACQUISITION (DAQ) IN LABVIEW

ADC - Types (Analog to Digital Converter)

ADC - Types (Analog to Digital Converter)

ADC - Types (Analog to Digital Converter)

Wireless Sensor Network

Wireless Sensor Network

Wireless Sensor Network

ARM Based Handy and Portable Oscilloscope Using Graphical Display

ARM Based Handy and Portable Oscilloscope Using Graphical Display

ARM Based Handy and Portable Oscilloscope Using Graphical Display

Assignment 2

3 STM32's ADC.ppt

3 STM32's ADC.ppt

3 STM32's ADC.ppt

Microprocesser

More from jyothimuppasani1

How does an open source operating system like Linux® affect Internet security and safety? Solution Since open source operating system\'s code is available to all,it\'s provides an easy access to hackers and potential misusers which affects safety of such systems. The non stable nature of Open source operating system also can be considered an important factor that affects the Security.This is because Developers all over the globe modify the code and thus the code is not stable and it becomes vulnerable to security threats. Even if patches are introduced from time to time,mostly after an attack or so but due to large flavours or distributions of open source software, some flavours are left without patches that makes them vulnerable to attacks. Also,The administration of open source operating system Servers also plays an important factor in Internet Security. Since it is known that for example,Linux Server administration is more difficult and when multiple ports are open it is sometimes not possible to handle an attack or security threat immediately. But then as it is said that every coin has two sides, Sometimes it is considered that Open Source Systems like Linux are more secure because of the following reasons :.

How does an open source operating system like Linux® affect Internet.pdf

How does an open source operating system like Linux® affect Internet.pdf

How does an open source operating system like Linux® affect Internet.pdf

jyothimuppasani1

Help please!! (Include your modified DList.java source code file in your homework solution zip archive) Using whatever Java IDE you prefer, create a project and add DList.java and DListTest.java to it (these files are provided in the Week 6 Source zip archive). Modify DList to implement a method that removes all occurrences of a specific integer from the list. Here is the pseudocode: Method removeAll(In: Integer pData) Returns Nothing Define index variable i and initialize i to 0 While i < the size of this Dlist Do If get(i) equals pData Then remove(i) Else Increment i End If End While End Method removeAll Next, modify DListTest() to add test case 21 which tests that removeAll() works correctly. WHat more do i need to provide to get help on this??? Solution /* DListNode.java */ /** * A DListNode is a node in a DList (doubly-linked list). */ class DListNode { /** * item references the item stored in the current node. * prev references the previous node in the DList. * next references the next node in the DList. * * DO NOT CHANGE THE FOLLOWING FIELD DECLARATIONS. */ public Object item; protected DListNode prev; protected DListNode next; /** * DListNode() constructor. * @param i the item to store in the node. * @param p the node previous to this node. * @param n the node following this node. */ DListNode(Object i, DListNode p, DListNode n) { item = i; prev = p; next = n; } } /* DList.java */ /** * A DList is a mutable doubly-linked list ADT. Its implementation is * circularly-linked and employs a sentinel (dummy) node at the head * of the list. * * DO NOT CHANGE ANY METHOD PROTOTYPES IN THIS FILE. */ class DList { /** * head references the sentinel node. * size is the number of items in the list. (The sentinel node does not * store an item.) * * DO NOT CHANGE THE FOLLOWING FIELD DECLARATIONS. */ protected DListNode head; protected int size; /* DList invariants: * 1) head != null. * 2) For any DListNode x in a DList, x.next != null. * 3) For any DListNode x in a DList, x.prev != null. * 4) For any DListNode x in a DList, if x.next == y, then y.prev == x. * 5) For any DListNode x in a DList, if x.prev == y, then y.next == x. * 6) size is the number of DListNodes, NOT COUNTING the sentinel, * that can be accessed from the sentinel (head) by a sequence of * \"next\" references. */ /** * newNode() calls the DListNode constructor. Use this class to allocate * new DListNodes rather than calling the DListNode constructor directly. * That way, only this method needs to be overridden if a subclass of DList * wants to use a different kind of node. * @param item the item to store in the node. * @param prev the node previous to this node. * @param next the node following this node. */ protected DListNode newNode(Object item, DListNode prev, DListNode next) { return new DListNode(item, prev, next); } /** * DList() constructor for an empty DList. */ public DList() { // Your solution here. head = newNode(null, head, head); head.prev = head; head.next = head; si.

Help please!!(Include your modified DList.java source code file in.pdf

Help please!!(Include your modified DList.java source code file in.pdf

Help please!!(Include your modified DList.java source code file in.pdf

jyothimuppasani1

how can I replace the \"Newsfeed\" text with a custom on in SharePoint 365. (Newsfeed Webpart) Solution First of all there are some differences between sharepoint and office 365. SharePoint has 4 versions still in active use : SharePoint 2007,2010,2016 and office 365. Office 365 released in 2011 With SharePoint2010 interface. Office 365 hav a various exclusive features like NextGen Portals (Out of the box “ready to go” portals), Delve (A technology based on Office Graph that presents “relevant information” to you based on your actions and interactions with colleague files), Sway (A presentation web par that allows users to combine text, images and videos locally and from the wider internet to create a usable website.), Yammer Integration (Yammer is the enterprise social network that\'s being gradually rolled into all Office 365 features.) anf Office 365 Groups. A custom CSS included in SharePoint master page in order to customize Newsfeed Web Part. the code is: .ms-microfeed-siteFeedTitleArea { background-color: silver; padding-left: 20px; text-transform:uppercase; padding-bottom: 3px; padding-top: 2px; margin-bottom: 5px; } .ms-microfeed-siteFeedMicroBlogPart { margin-bottom: 2px; } .ms-microfeed-siteFeedTitleLabel { color: red !important; } .ms-microfeed-threadsDiv { height: 250px; overflow-y: auto; overflow-x: hidden; } .ms-microfeed-thread { max-width: 435px; margin-bottom: 10px; } .ms-microfeed-replyArea { max-width: 375px; min-width: 300px; } .ms-microfeed-attachmentButton { padding-top: 2px; padding-bottom: 2px; display: block; } .ms-microfeed-postButton { padding-top: 2px; padding-bottom: 2px; } .ms-microfeed-postButtonSpan { margin-top: 2px; } .ms-microfeed-postBox { height: 20px; } Apart from this we can also hide controls, for this first we need to activate Site Feed feature, to do this go to site settings->Manage Site Features and activate it script for hide controls I used the following CSS classes and its worked. .ms-microfeed-cancelButton{ background-color: #fcfcfc !important; border: 1px solid #d4d4d4 !important; -moz-border-radius: 10px !important; -webkit-border-radius: 10px !important; border-radius: 10px !important; color: #00a6d9 !important; height: 22px !important; padding-top: 3px !important; width: 78px !important; font-family: Arial !important; font-size: 11px!important; font-weight: normal !important; } .ms-microfeed-siteFeedTitleArea { background-color: silver; padding-left: 20px; text-transform:uppercase; padding-bottom: 3px; padding-top: 2px; margin-bottom: 5px; } .ms-microfeed-siteFeedMicroBlogPart { margin-bottom: 2px; } .ms-microfeed-siteFeedTitleLabel { color: red !important; } .ms-microfeed-threadsDiv { height: 250px; overflow-y: auto; overflow-x: hidden; } .ms-microfeed-thread { max-width: 435px; margin-bottom: 10px; } .ms-microfeed-replyArea { max-width: 375px; min-width: 300px; } .ms-microfeed-attachmentButton { padding-top: 2px; padding-bottom: 2px; padding-bottom: 2px; display: block; } .ms-microfeed-pos.

how can I replace the Newsfeed text with a custom on in SharePoi.pdf

how can I replace the Newsfeed text with a custom on in SharePoi.pdf

how can I replace the Newsfeed text with a custom on in SharePoi.pdf

jyothimuppasani1

Hello! This is Java assignment applet. Can someone help me writing a code how to exit the game when I press no in question( would you like to play again?). Also if no one wins or draws i would like to pop up the question ( would you like to play again?). I have the code below i would like someone to add it Thanks in advance! import javax.swing.*; import java.awt.*; import java.awt.event.*; import java.applet.*; public class TicTacToe extends Applet implements ActionListener{ // Array to store buttons JButton button[][] = new JButton[3][3]; boolean isNewGame =false; // To switch player either X or O boolean isZero = true; //first turn is always 0 // Setup size // Set layout to grid // Create buttons through loop // Add buttons to layout // Add listener public void init(){ setSize(500, 500); setLayout(new GridLayout(3,3)); // if it is not a new game if(isNewGame==false) { // Adding buttons to layout //initialize the Grid and add ActionListener to each Button for(int i = 0; i < 3; i++){ for(int j = 0; j < 3; j++){ // init jButton button[i][j] = new JButton(\"\"); // Setup Font and Size here button[i][j].setFont(new Font(\"Lucida Grande\", Font.PLAIN, 28)); // Add is a method from applet to add buttons in layout add(button[i][j]); // Listener button[i][j].addActionListener(this); } } } else { // If we need to restart the game, then we only set text to empty // Back to black color // add listener for(int i = 0; i < 3; i++){ for(int j = 0; j < 3; j++){ button[i][j].setText(\"\"); button[i][j].setForeground(Color.BLACK); button[i][j].removeActionListener(this); button[i][j].addActionListener(this); } } } } // Go all the buttons in arrsy // Check the event with button in array // if player O is true, set button text O. Otherwise. X // Remove Listerner. Why? only once you can click // Change player by isZero // Check for winner public void actionPerformed(ActionEvent event){ for(int i = 0; i < 3; i++) for(int j = 0; j < 3; j++){ if((event.getSource() == button[i][j])){ if(isZero){ button[i][j].setText(\"O\"); } else{ button[i][j].setText(\"X\"); } button[i][j].removeActionListener(this); //you cannot click on one tile more than once isZero = !isZero; checkForWinners(); //check if any winner after each move } } } public void checkForWinners(){ //3 horizontal lines for(int i = 0; i < 3; i++){ if(button[i][0].getText().equals(button[i][1].getText()) && button[i][1].getText().equals(button[i][2].getText()) && !button[i][0].getText().equals(\"\")){ String player = button[i][0].getText(); button[i][0].setForeground(Color.RED); button[i][1].setForeground(Color.RED); button[i][2].setForeground(Color.RED); int reply =JOptionPane.showConfirmDialog(null, player + \" wins!\"+\"\ Would like to play again?\",\"Game over\",JOptionPane.YES_NO_OPTION); if (reply == JOptionPane.YES_OPTION) { isNewGame = true; init(); return; } else { System.exit(0); return; } } } //3 vertical lines for(int i = 0; i < 3; i++){ if(button[0][i].getText().equals(button[1][i].getText()) && .

Hello!This is Java assignment applet.Can someone help me writing.pdf

Hello!This is Java assignment applet.Can someone help me writing.pdf

Hello!This is Java assignment applet.Can someone help me writing.pdf

jyothimuppasani1

For each of the following reseach questions identify the observation.pdf

For each of the following reseach questions identify the observation.pdf

For each of the following reseach questions identify the observation.pdf

jyothimuppasani1

Find an Eulerian trail in the following graph. Be sure to indicate the order in which the edges are visited. Solution Eulerian path/ trail: A path is called as Eulerian path if every edge of the graph G appears exactly ince in the path. NOTE:: A graph possesses an Eulerian trail if and only if it is connected and has either zero and 2 vertices of odd degrees ANSWER: order -> h,d,c,b,f,e,b,a,e,i,j,f,g,k,l,h,g,c,d.

Find an Eulerian trail in the following graph. Be sure to indicate th.pdf

Find an Eulerian trail in the following graph. Be sure to indicate th.pdf

Find an Eulerian trail in the following graph. Be sure to indicate th.pdf

jyothimuppasani1

File encryption. [32] Write a program which accepts a filename as a command-line argument [- 32]. It should then ask for a password via stdin (but it should not visible when entered; use getpass for this) [4]. The program should encrypt the file using a block-cipher algorithm (see encryption.rst for details) [12] if it was not already encrypted by the program, and rename it with a .enc extension. If it was already encrypted, it should decrypt the file and remove the .enc extension [12]. Under no circumstance should the program multiply encrypt the file [4]. Call the program encrypt.cpp. here is encrypt.rst Suppose I have an input file to encrypt: .. raw: The only true wisdom is in knowing you know nothing. (A quote by Socrates.) What I can do then is ask the user for a password. Suppose the user enters kitties. Then what I may do is pre-pend the password to an output file, and add kitties in rounds to the file: .. raw: kittiesThe only true wisdom is in knowing you know nothing. + kittieskittieskittieskittieskittieskittieskittieskittieskit - ---------------------------------------------------------- = fhdkalhfioepwahfkdsanklvcxznkjvpwipqnkxlkdlajsflkjkljkljlkd When I add the characters in the string kitties, I get what appears to be jumbled garbage. Without the password, it is hard to decrypt the file. To decrypt the file, I ask the user for the password. Suppose they enter bubbles (the wrong password). .. raw: fhdkalhfioepwah... - bubbles ------------------ = ueiaqnv I see that by subtracting bubbles off the encrypted text, I do not get the string bubbles back, so bubbles is not the password. If the user enters kitties (the correct password): .. raw: fhdkalhfioepwah... - kitties ------------------ = kitties Then I see that what I get back is kitties, and since it matches the user password entered, I may proceed to decrypt the rest of the file simply by subtracting kitties off it in rounds. .. raw: = fhdkalhfioepwahfkdsanklvcxznkjvpwipqnkxlkdlajsflkjkljkljlkd - kittieskittieskittieskittieskittieskittieskittieskittieskit ------------------------------------------------------ ----- kittiesThe only true wisdom is in knowing you know nothing. Thus I obtain the original message. Notice the user-supplied password itself is a necessary element of the decryption. This type of algorithm is called a block cipher algorithm. Solution // Encrypting_a_File.cpp : Defines the entry point for the console // application. // #include #include #include #include #include // Link with the Advapi32.lib file. #pragma comment (lib, \"advapi32\") #define KEYLENGTH 0x00800000 #define ENCRYPT_ALGORITHM CALG_RC4 #define ENCRYPT_BLOCK_SIZE 8 bool MyEncryptFile( LPTSTR szSource, LPTSTR szDestination, LPTSTR szPassword); void MyHandleError( LPTSTR psz, int nErrorNumber); int _tmain(int argc, _TCHAR* argv[]) { if(argc < 3) { _tprintf(TEXT(\"Usage: \") TEXT(\" | \ \")); _tprintf(TEXT(\" is optional.\ \")); _tprintf(TEXT(\"Press any key to exit.\")); _gettch(); return 1; } LPTS.

File encryption. [32] Write a program which accepts a filename as a .pdf

File encryption. [32] Write a program which accepts a filename as a .pdf

File encryption. [32] Write a program which accepts a filename as a .pdf

jyothimuppasani1

Explain the relevance that medical standards of practice have to one as a practioner? Solution \'Providing care\' incorporates, however isn\'t restricted to any care, treatment, counsel, administration or merchandise gave in regard of the physical or emotional well-being of a man, regardless of whether compensated or genius bono. \'Practice\' implies any part, regardless of whether compensated or not, in which the individual uses their aptitudes and learning as a specialist in their controlled wellbeing calling. For the motivations behind this Code, rehearse isn\'t limited to the arrangement of direct clinical care. It additionally incorporates utilizing proficient learning in a direct nonclinical relationship with patients or customers, working in administration, organization, instruction, look into, warning, administrative or arrangement improvement parts and whatever other parts that effect on sheltered, powerful conveyance of wellbeing administrations in the wellbeing calling. Keeping up and creating learning, aptitudes and proficient conduct are center parts of good practice. This requires self-reflection and support in pertinent proficient advancement, rehearse change and execution evaluation procedures to persistently create proficient capacities. These exercises must proceed through a specialist\'s working life as science and innovation create and society changes. giving specialists who are patients or customers with a similar nature of care gave to different patients or customers b). informing the sheets if treating another enrolled specialist who has set patients or customers in danger of significant mischief while rehearsing their calling since they have an impedance (allude to the board\'s rules on compulsory detailing) this is a proficient and also a statutory obligation under the National Law At the point when specialists are engaged with look into that includes patients or customers, great practice incorporates: a). regarding the privilege of patients or customers to pull back from an investigation without partiality to their treatment b). guaranteeing that a choice by patients or customers not to take an interest does not bargain the specialist tolerant/customer relationship or the care of the patient or customer..

Explain the relevance that medical standards of practice have to one.pdf

Explain the relevance that medical standards of practice have to one.pdf

Explain the relevance that medical standards of practice have to one.pdf

jyothimuppasani1

Find the mission and values statements for four different hospital types. Do their missions and values reconcile with your expectations for the type of organization? Look at a religious based organization. Does their mission and values reflect their religious teachings and mission? Now examine a for-profit hospital. Does their mission and values include the need to increase their owners\' value and maximizing their earning? Why do you think the missions and values are structured as they are? 1. The missions and values are structured as they are to meet the desires of the stakeholders. The specifics of this question must be left to the particulars of the instructional environment. Solution We will describe mission and value statements of four hospitals given below:- a) Seattle Children\'s Hospital Mission statement:- We provide hope, care and cures to help every child live the healthiest and most fulfilling life possible. Value statement:- Compassion Empathy for patients, their families and staff is ingrained in our history and inspires our future. We do more than treat the child; we practice family-centered care as the cornerstone of compassion. Excellence Our promise to treat, prevent and cure pediatric disease is an enormous responsibility. We follow the highest standards of quality and safety and expect accountability from each other. Integrity At all times, we approach our work with openness, transparency, decency and humility. It is our responsibility to use resources wisely to sustain Seattle Children’s for generations to come. Collaboration We work in partnership with patients, their families, staff, providers, volunteers and donors. This spirit of respectful cooperation extends beyond our walls to our business partners and the community. Equity We embrace and find strength in the diversity of our patients, their families, staff and community. We believe all children deserve exceptional care, the best outcomes, respect and a safe environment. Innovation We aspire to be an innovative leader in pediatric healthcare, research and philanthropy. We continually seek new and better solutions. Because innovation springs from knowledge, we foster learning in all disciplines. b) Rochester Regional Health Mission statement:- To enhance lives and preserve health by enabling access to a comprehensive, fully integrated network of the highest quality and most affordable care, delivered with kindness, integrity and respect. Value Statement:- Quality By setting and surpassing higher standards, we will continue to build a smarter, faster, more efficient organization that delivers excellent, appropriate care in the right place at the right time. Compassion Our culture of caring will be unmistakable in every personal interaction as we treat individuals, families and colleagues with empathy, honesty and openness. Respect We will treat each individual with caring consideration and value the diverse perspectives each one of them can bring. Collaboration By w.

Find the mission and values statements for four different hospita.pdf

Find the mission and values statements for four different hospita.pdf

Find the mission and values statements for four different hospita.pdf

jyothimuppasani1

Did colonial rule \"freeze\" colonized societies by preserving old social and economic patterns, or was colonial rule a disruptive force of change? Provide specific evidence to support each side of this question. Solution Transforming: Colonial rule gave African women greater autonomy in their day to day lives, some of whom took advantage of trade. New opportunities were also offered to cash crop farmers who were able to use colonial trade networks for their own benefit. Large scale conversion of some populations to Christianity A minority got Western educations, which transformed their lives and their vision of their society. Preserving: No colonial society underwent Japanese-style industrialization. Colonial societies engages mostly in primary economic activities, such as agriculture. Colonialism stunted the growth of the middle class, creating unstable societies. The practice of ruling through established authorities maintained the status quo..

Did colonial rule freeze colonized societies by preserving old s.pdf

Did colonial rule freeze colonized societies by preserving old s.pdf

Did colonial rule freeze colonized societies by preserving old s.pdf

jyothimuppasani1

Do you think that nonhuman animals have interests? Does this mean that they also have rights? Explain. Solution Human beings are living beings and so are the animals. A man is a known as a social animal only because he has the ability to speak and interact in a more civilized way than any other animals. But having said that, the rights surrounding to the human beings such as the ‘Right to live’, remains the same even for the feral human beings who are such humans who are raised in the Jungle and are isolated for some reason from the human world or contact. In this regard, if one cannot distinguish a feral child, who can simply screech or crawl, rather than walk on two legs and behave more like animals than like humans, from that of any other civilized human being, then such a distinguished nature of human beings towards the nonhuman animals, is simply a biased opinion. Animals are mute. They cannot speak for themselves. But they too have a heart that throb like a human. They feel hunger. They feel the pain too. Even they long companionship. They long for a community of their own to co-stay. Hence, I do believe nonhuman animals do have interests. In such a case, they also have rights. They are simply helpless because they are unable to reach us out in our ways. But that is not their fault. Perhaps the rule of nature. The nature requires all to co-exist and hence the Noah’s ark once gave shelter to creatures of all kind and not just restricted to the mankind. Even the nature wants the creatures to live in harmony and that is possible when we do not invade their territory but of course, let not them invade ours too. However, in today’s world, man’s greed has unturned the entire balanced eco-cycle. We have deeply penetrated into the woods and concretized the Jungle to the extent that we have quite literally done away with the interests of these nonhuman animals. For the balanced eco-system, the contribution of the nonhuman animals have also been very significant. But in a course of time, we snatched away their rights. Yes, we have laws in place to protect the near-to-extinct animals or to stop killing or preying the nonhuman animals for organs selling and other purposes. However, the illegal exploitation of these nonhuman animals have only helped us think that perhaps the interests of the nonhumans or their rights are of much lesser importance than that of the pleasure of the human beings for the only reason being that we, the humans can speak and represent for ourselves. In the mask of civilization, we are rather heading to a more sophisticated way of demeaning the rights of the animals or their interests..

Do you think that nonhuman animals have interests Does this mean th.pdf

Do you think that nonhuman animals have interests Does this mean th.pdf

Do you think that nonhuman animals have interests Does this mean th.pdf

jyothimuppasani1

Discuss the importance of recognizing and implementing different entry strategies and organizational arrangements which result in shared control and oversight through collaborative relationships Solution Entry strategies are explained as a well planned method through which the company decide to delivery its good and services to the targeted market. The different types of market entry strategies and organizational arrangement and its importance are discussed below: 1 .Exporting: when goods/Product are produced in one country and marketed in another country then it is known as exporting. 2. Licensing: When a firm permit the company operating in another company to use its manufacturing process, copyrights, and trademark with specific and determined payment. 3. Franchising: It’s an agreement between two companies, where a company (the franchiser) gives all its rights to another company (the franchisee) to use its trademark, manufacturing process and market to certain specification. 4. Joint venturing: In this two companies or investors share ownership and control over the finance and operations of the firm. 5. Contract Manufacturing: In this the company operating in foreign countries gets into contract to with the country operating there for manufacturing or assembling of the product. 6. Merger & Acquisitions: It is defined as restructuring of organization, for positive growth and value. Merger means to ‘merge’ in which two companies legally merge into one into one entity, whereas an acquisition means when one company takes over another and completely become new owner. All the entry strategies discussed above results in shared control through collaborative relationships..

Discuss the importance of recognizing and implementing different ent.pdf

Discuss the importance of recognizing and implementing different ent.pdf

Discuss the importance of recognizing and implementing different ent.pdf

jyothimuppasani1

Considering the challenges she is facing, what Anita\'s plan before the strategic planning retreat? How would you reformulate the art center mission, has the center need a new strategy? why or why not? Solution Anitha wants to bring some new innovation arts to the Arts center. This also brings more profit for her. People who are crazy of arts expect more attractive and interesting arts,so she has to increase her quality of arts to entertain the art lovers. Few people who don\'t have any knowledge about arts also started trying out with arts. The art center mission can be reformulated by inspiring them in participating in performances and they have to feel that what time they have towards arts must be meaningful. The strategy that can be used by sponsoring and contributing. This work can get help by adding partners also. Through this they can teach others and also bring their talents out. By performing like this the whole community gets attracted and her dream comes true. Through this they can bring out the most hidden artists in the community and many artists are come out showing their excellence in their art..

Considering the challenges she is facing, what Anitas plan before .pdf

Considering the challenges she is facing, what Anitas plan before .pdf

Considering the challenges she is facing, what Anitas plan before .pdf

jyothimuppasani1

Data Structure in C++ Doubly Linked Lists of ints http://staffwww.fullcoll.edu/aclifton/courses/cs133_fa16/files/dlist.h This is my code below: dlist.cc ------------------------------------------------------------------------------------------------------- #include #include \"dlist.h\" dlist::node* dlist::at(int n){ node* c = _head; while(n > 0 && c){ c = c->next; n--; } return c; } void dlist::insert(node* previous, int value){ node* n = new node{value, previous->next}; previous->next = n; }//update tail void dlist::del(node* which){ node* nn = which->next; which->next = nn->next; delete nn; } void dlist::push_back(int value){ node* n = new node{value, nullptr}; _tail->next = n; _tail-> n; } void dlist::push_front(int value){ node* n = new node(value, nullptr); _head->prev = n; _head-> n; } void dlist::pop_front(){ node* n = _head; _head = _head->next; delete n; } void dlist::pop_back(){ node* n = _tail; _tail = _tail->prev; delete n; } int dlist::size() { node* c = _head; int s = 0; while(c){ s++; c = c->next; } return s; } -------------------------------------------------------------------------------- Please fix and complete my code, and I also need whole code contatining main function for testing dlist.cc In this assignment, you will implement a doubly-linked list class. together with some list operations. To make things easier, you\'ll implement a list of int rather than a template class pragma once dlist. h Doubly linked lists of ints include Kostream class dlist public: d list struct node int value node next node prev; node\' head() const return -head; node\" tail() const t return -tail Implement ALL the following methods Returns the node at a particular index (0 is the head node at(int) Insert a new value, after an existing one void insert(node *previous int value Delete the given node void del (node which) Solution #include #include #include /* * Node Declaration */ using namespace std; struct node { int value; string name; struct node *next; struct node *prev; }*start; /*class declaration class dlist { public: void create_list(int value); void push_front(int value); void push_back(int value, int position); void pop_front(int value); void pop_back(int value); void display_dlist(); void reverse(); dlist() { start = NULL; head=NULL; last=NULL; } bool empty() const { return head==NULL; } friend ostream& operator<<(ostream& ,const dlist& ); void insert(const string& ); void remove(const string& ); private: node* head() const { return _head; } node* tail() const { return _tail; } }; dlist.cc: /* Create Double Link List*/ void dlist::create_list(int value) { struct node *s, *temp; temp = new(struct node); temp->info = value; temp->next = NULL; if (start == NULL) { temp->prev = NULL; start = temp; } else { s = start; while (s->next != NULL) s = s->next; s->next = temp; temp->prev = s; } } /* * Insertion at the beginning */ void dlist::add_begin(int value) { if (start == NULL) { cout<<\"First Create the list.\"<prev = NULL; temp->info = val.

Data Structure in C++Doubly Linked Lists of ints httpstaffwww.pdf

Data Structure in C++Doubly Linked Lists of ints httpstaffwww.pdf

Data Structure in C++Doubly Linked Lists of ints httpstaffwww.pdf

jyothimuppasani1

Conceptual skills are most important at the Solution Conceptual skills relate to the managers\' mental ability to coordinate and integrate all of the organization\'s interests and activities. It is about thinking in the abstract and observing relationships between forces that many others may not be able to see and to take a global perspective of the organization and its environment. This is not so relevant at the lower level of management and is most important at the top management level because the senior managers must look for and exploit unseen opportunities for their organizations..

Conceptual skills are most important at theSolutionConceptual .pdf

Conceptual skills are most important at theSolutionConceptual .pdf

Conceptual skills are most important at theSolutionConceptual .pdf

jyothimuppasani1

A variable whose scope is restricted to the method where it was declared is known as a(n) parameter global variable local variable public instance data private instance data parameter global variable local variable public instance data private instance data Solution Answer is \"Local Variable\" Parameter: parameter is something which is passed to the method, and not declared in the method. Global Variable: Global Variable is accessible from anywhere in the program. And not just restricted to a certain method..

A variable whose scope is restricted to the method where it was decl.pdf

A variable whose scope is restricted to the method where it was decl.pdf

A variable whose scope is restricted to the method where it was decl.pdf

jyothimuppasani1

•Design (create) 3 questions for a quiz show game and design regular expressions that validate the answers. The challenge is to be no more and no less exacting than a human checker. I have the sample quiz done already.email me for code Solution Database design • Not easy! • Will discuss formal methods next week • Review: databases are made up of – Tables: tables made up of • Records: records made up of fields • Speaking of rows and columns is misleading • Critical issue: fixed number of fields, though a specific field may be optional (aka not required) – NOT NULL in MySQL jargon means required! – MySQL does support variable length strings. Data types • Terminology varies for different DBMS products • Performance (speed) of operations varies with different datatypes • Size varies with different datatypes • Performance and size limits are points of competition among the different products MySQL datatypes: numbers • INT (aka INTEGER), can be UNSIGNED (Size 4 bytes = 32 bits) • TINYINT, SMALLINT, MEDIUMINT, BIGINT – Different sizes • float (4 bytes), double (8 bytes), can specify precision within these limits • more MySQL datatypes, strings • CHAR(specified length) • VARCHAR(maximum length) • TINYBLOB short, variable length string, up to 255 characters • BLOB, TEXT variable length string • MEDIUMBLOB, MEDIUMTEXT, LONGBLOB, LONGTEXT MySQL datatypes: enum • ENUM – Specify one of a set of values – Stored as an integer, with 0 indicated unset or not in the specified set – Doing this may be more efficient because built-in MySQL routines do the searching MySQL datatypes: date/time • DATE • TIME • DATETIME • YEAR • TIMESTAMP Tables • Specify one field as the primary key • Primary keys are unique IN THAT TABLE – Let the DBMS create the primary key OR – Depend on intrinsic value that is guaranteed to be unique • Email addresses • ISBN numbers • ? • A field in one table may be a foreign key. This is a reference to a primary key in another table (or this table). MORE ON THIS LATER. Database • Assume database itself is created for us AND we have permissions to create new tables. • NOTE: permissions can be set by MySQL commands, including queries sent by php. • Start off talking general SQL and then specific php and MySQL Create table example • CREATE TABLE movies ( mid INT NOT NULL AUTO_INCREMENT PRIMARY KEY, mname CHAR(30), mdesc TEXT, myear YEAR ) Create table example CREATE TABLE players ( pid INT NOT NULL AUTO_INCREMENT PRIMARY KEY, pname CHAR(30), score INT NOT NULL, lastplayed DATE ) Create example CREATE TABLE games ( gid INT NOT NULL AUTO_INCREMENT PRIMARY KEY, pid INT, gtime TIMESTAMP, score INT ) The pid field will refer to / have the value of the pid field (the primary key) of a specific player. Here in this table, it is called a foreign key. Foreign keys • Some versions of MySQL (and other DBMS) have ways to specify the the pid value is a foreign key pid INT REFERENCE players • The DBMS will check to make sure it is a valid value. • Since the php.

•Design (create) 3 questions for a quiz show game and design regular.pdf

•Design (create) 3 questions for a quiz show game and design regular.pdf

•Design (create) 3 questions for a quiz show game and design regular.pdf

jyothimuppasani1

You are to write a GUI program that will allow a user to buy, sell and view stocks in a stock portfolio. Objective: Write a GUI program that maintains a cash balance, list of stock holdings, supports buying and selling of stocks and displays the current portfolio inventory. Program Capabilities: 1. Allow a user to buy a stock with a given number of shares and price per share. 2. Display the current portfolio (stock ticker, number of shares, initial price). 3. Update the portfolio display for purchases and sales. 4. Allow the user to sell all of the shares of a given stock. 5. Give the user an initial cash balance, and update and display the balance according to the user\'s purchases and sales. 6. Ignore any transaction that causes the cash position to go below $0. USE OF PREVIOUS StockHolding and PortfolioList LABS IS ADVISED. (I\'ve including my solutions to these below) This is my written code from earlier homework: public class StockHolding { private String ticker; private int numShares; private double initialSharePrice; private double currentSharePrice; public StockHolding(String ticker, int numberShares, double initialPrice) { this.ticker = ticker; numShares = numberShares; initialSharePrice = initialPrice; currentSharePrice = initialPrice; } public double getCurrentValue() { return numShares * getCurrentSharePrice(); } public double getInitialCost() { return numShares * getInitialSharePrice(); } public double getCurrentProfit() { return getCurrentValue() - getInitialCost(); } public double getCurrentSharePrice() { return currentSharePrice; } public void setCurrentSharePrice(double currentSharePrice) { this.currentSharePrice = currentSharePrice; } public String getTicker() { return ticker; } public int getShares() { return numShares; } public double getInitialSharePrice() { return initialSharePrice; } @Override public String toString() { return \"Stock \" + ticker + \", \" + numShares + \", shares bought at \" + initialSharePrice + \", current price \" + currentSharePrice; } } AND import java.util.ArrayList; public class PortfolioList { private ArrayList portfolio; public PortfolioList() { portfolio = new ArrayList(); } public void add(StockHolding stock) { portfolio.add(stock); } public StockHolding find(String ticker) { for (int i = 0; i < portfolio.size(); i++) { StockHolding sh = portfolio.get(i); if (sh.getTicker().equals(ticker)) { return sh; } } return null; } public void remove(String ticker) { int pos = -1; for (int i = 0; i < portfolio.size(); i++) { StockHolding sh = portfolio.get(i); if (sh.getTicker().equals(ticker)) { pos = i; } } if (pos != -1) { portfolio.remove(pos); } } I\'ve been staring at this for two days, and I am lost. Please, any guidance/help would be greatly appreciated. Honestly don\'t even need a full solution, just need something to kick start. A comment skeleton would help a ton. Thanks! Solution SOURCE CODE: package stock; public class StockHolding { private String ticker; private int numShares; private do.

You are to write a GUI program that will allow a user to buy, sell a.pdf

You are to write a GUI program that will allow a user to buy, sell a.pdf

You are to write a GUI program that will allow a user to buy, sell a.pdf

jyothimuppasani1

write the To Do\'s to get the exact output: NOte: A valid Fraction number has a non-negative numerator and a positive denominator. Default constructor initializes the object to safe empty state (an object with denom equals -1). The two-argument constructor also validates the parameters and sets the object to the safe empty state if the parameters are not valid. Write the definitions and prototypes of following functions in Fraction.cpp and Fraction.h respectively (They are indicated in the files by //TODO tag): Define isEmpty function as a member function, which returns true if the object is in safe empty state (an object is in the safe empty state if denominator (denom) equals -1). Define display function, which sends a Fraction number to the output stream (with the “Numerator/denominator” format). This function just prints \"Invalid Fraction Object!\" in the screen if the object is in the safe empty state. In case that object denominator equals 1, it just print the numerator. Define the operator functions for the following operators: “+=”, “+”, “*” The overload of the above operators should make the following code possible: The member operator+ : Adds two Fraction numbers and returns a Fraction number as the result. This function returns an object with the safe empty state if either of Fraction numbers (operands) is in safe empty state. It makes following code possible: A+B ( where A and B are Fraction objects) The member operator+= : Adds two Fraction numbers and assigns the result to the left operand, then returns a reference to the left operand. If either of Fraction numbers (operands) is in safe empty state, it initializes the left operand to the safe empty state, then returns a reference to the left operand. It makes following code possible: A+=B ( where A and B are Fraction objects) The member operator* : Multiplies two Fraction numbers and returns a Fraction number as the result. This function returns an object with the safe empty state if either of Fraction numbers (operands) is in safe empty state. It makes following code possible: A*B ( where A and B are Fraction objects) fraction.cpp #include \"Fraction.h\" using namespace std; namespace sict{ Fraction::Fraction(){ denom =-1; // safe empty state } Fraction::Fraction(int n, int d) // n: numerator, d: denominator { if(n >= 0 && d > 0){ num = n; denom = d; reduce(); } else denom =-1; // set to safe empty state } int Fraction::gcd() // returns the greatest common divisor of num and denom { int mn = min(); // min of num and denom int mx = max(); // mX of num and denom for (int x=mn ; x > 0 ; x--) // find the greatest common divisor if( mx % x == 0 && mn % x == 0) return x; return 1; } void Fraction::reduce() // simplify the Fraction number { int tmp = gcd(); num /= tmp; denom /= tmp; } int Fraction::max () { return (num >= denom) ? num : denom; } int Fraction::min() { return (num >= denom) ? denom : num; } // in_lab // TODO: write the implementation of display function HERE // TODO: w.

write the To Dos to get the exact outputNOte A valid Fraction .pdf

write the To Dos to get the exact outputNOte A valid Fraction .pdf

write the To Dos to get the exact outputNOte A valid Fraction .pdf

jyothimuppasani1

What are the factors that contribute to H+ gain or loss? How do lungs and the kidneys balance or regulate the changes in pH? Solution Answer= Factors that contribute to loss or gain of H ions are= CO2 concentration O2 concentration bicarbonate concentration in urine The lungs regulate the changes in PH = Acid base imbalances in the bloods pH can be altered by changes in breathing to expel ,ore CO2 & raise the pH back to normal Hydrogen ions are carried in the blood along with oxygen & carbon dioxide 60 % CO2 is carried as a dissolved bicarbonate A small amount of CO2 is carried on Haemoglobin as carbaminohaemoglobin which is transported to the lungs for removal Acid base imbalances that overcome the buffer system can be compensated in the short term by changing the rate of ventilation When pH of blood drops too low ,the body compensates by increasing breathing to expel more CO2 & during alkalemia the inspiration occurs Regulation of pH by kidneys = kidneys have 2 important roles in maintaining the acid -base balance 1]They reabsorb bicarbonate from urine 2] they excrete hydrogen ions into urine The major homeostatic control point for maintaining a stable pH balance is renal excretion Bicarbonate does not have transporter ,so its reabsorption involves a series of reactions in the tubule lumen & tubular epithelium . In response tyo acidosis the tubular cells reabsorb more bicarbonate from the tubular fluid ,& the collecting cells secrete more hydrogen & generate more bicarbonate In response to alkalosis ,the kidneys may excrete more bicarbonate by decreasing Hydrogen ion secretion from tubular epithelial cells ,& lowering the rates of glutamine metabolism & ammonium excretion.

What are the factors that contribute to H+ gain or loss How do lung.pdf

What are the factors that contribute to H+ gain or loss How do lung.pdf

What are the factors that contribute to H+ gain or loss How do lung.pdf

jyothimuppasani1

More from jyothimuppasani1 (20)

How does an open source operating system like Linux® affect Internet.pdf

How does an open source operating system like Linux® affect Internet.pdf

How does an open source operating system like Linux® affect Internet.pdf

Help please!!(Include your modified DList.java source code file in.pdf

Help please!!(Include your modified DList.java source code file in.pdf

Help please!!(Include your modified DList.java source code file in.pdf

how can I replace the Newsfeed text with a custom on in SharePoi.pdf

how can I replace the Newsfeed text with a custom on in SharePoi.pdf

how can I replace the Newsfeed text with a custom on in SharePoi.pdf

Hello!This is Java assignment applet.Can someone help me writing.pdf

Hello!This is Java assignment applet.Can someone help me writing.pdf

Hello!This is Java assignment applet.Can someone help me writing.pdf

For each of the following reseach questions identify the observation.pdf

For each of the following reseach questions identify the observation.pdf

For each of the following reseach questions identify the observation.pdf

Find an Eulerian trail in the following graph. Be sure to indicate th.pdf

Find an Eulerian trail in the following graph. Be sure to indicate th.pdf

Find an Eulerian trail in the following graph. Be sure to indicate th.pdf

File encryption. [32] Write a program which accepts a filename as a .pdf

File encryption. [32] Write a program which accepts a filename as a .pdf

File encryption. [32] Write a program which accepts a filename as a .pdf

Explain the relevance that medical standards of practice have to one.pdf

Explain the relevance that medical standards of practice have to one.pdf

Explain the relevance that medical standards of practice have to one.pdf

Find the mission and values statements for four different hospita.pdf

Find the mission and values statements for four different hospita.pdf

Find the mission and values statements for four different hospita.pdf

Did colonial rule freeze colonized societies by preserving old s.pdf

Did colonial rule freeze colonized societies by preserving old s.pdf

Did colonial rule freeze colonized societies by preserving old s.pdf

Do you think that nonhuman animals have interests Does this mean th.pdf

Do you think that nonhuman animals have interests Does this mean th.pdf

Do you think that nonhuman animals have interests Does this mean th.pdf

Discuss the importance of recognizing and implementing different ent.pdf

Discuss the importance of recognizing and implementing different ent.pdf

Discuss the importance of recognizing and implementing different ent.pdf

Considering the challenges she is facing, what Anitas plan before .pdf

Considering the challenges she is facing, what Anitas plan before .pdf

Considering the challenges she is facing, what Anitas plan before .pdf

Data Structure in C++Doubly Linked Lists of ints httpstaffwww.pdf

Data Structure in C++Doubly Linked Lists of ints httpstaffwww.pdf

Data Structure in C++Doubly Linked Lists of ints httpstaffwww.pdf

Conceptual skills are most important at theSolutionConceptual .pdf

Conceptual skills are most important at theSolutionConceptual .pdf

Conceptual skills are most important at theSolutionConceptual .pdf

A variable whose scope is restricted to the method where it was decl.pdf

A variable whose scope is restricted to the method where it was decl.pdf

A variable whose scope is restricted to the method where it was decl.pdf

•Design (create) 3 questions for a quiz show game and design regular.pdf

•Design (create) 3 questions for a quiz show game and design regular.pdf

•Design (create) 3 questions for a quiz show game and design regular.pdf

You are to write a GUI program that will allow a user to buy, sell a.pdf

You are to write a GUI program that will allow a user to buy, sell a.pdf

You are to write a GUI program that will allow a user to buy, sell a.pdf

write the To Dos to get the exact outputNOte A valid Fraction .pdf

write the To Dos to get the exact outputNOte A valid Fraction .pdf

write the To Dos to get the exact outputNOte A valid Fraction .pdf

What are the factors that contribute to H+ gain or loss How do lung.pdf

What are the factors that contribute to H+ gain or loss How do lung.pdf

What are the factors that contribute to H+ gain or loss How do lung.pdf

Recently uploaded

UGC NET Paper 1 Unit 7 DATA INTERPRETATION.pdf

UGC NET Paper 1 Unit 7 DATA INTERPRETATION.pdf

UGC NET Paper 1 Unit 7 DATA INTERPRETATION.pdf

TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...

TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...

TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...

Nguyen Thanh Tu Collection

Diuretic, Hypoglycemic and Limit test of Heavy metals and Arsenic.-1.pdf

Diuretic, Hypoglycemic and Limit test of Heavy metals and Arsenic.-1.pdf

Diuretic, Hypoglycemic and Limit test of Heavy metals and Arsenic.-1.pdf

Tatlong Kwento ni Lola basyang-1.pdf arts

Tatlong Kwento ni Lola basyang-1.pdf arts

Tatlong Kwento ni Lola basyang-1.pdf arts

AIM of Education-Teachers Training-2024.ppt

AIM of Education-Teachers Training-2024.ppt

AIM of Education-Teachers Training-2024.ppt

Nishitharanjan Rout

OS-operating systems- ch05 (CPU Scheduling) ...

OS-operating systems- ch05 (CPU Scheduling) ...

OS-operating systems- ch05 (CPU Scheduling) ...

Dr. Mazin Mohamed alkathiri

80 ĐỀ THI THỬ TUYỂN SINH TIẾNG ANH VÀO 10 SỞ GD – ĐT THÀNH PHỐ HỒ CHÍ MINH NĂ...

80 ĐỀ THI THỬ TUYỂN SINH TIẾNG ANH VÀO 10 SỞ GD – ĐT THÀNH PHỐ HỒ CHÍ MINH NĂ...

80 ĐỀ THI THỬ TUYỂN SINH TIẾNG ANH VÀO 10 SỞ GD – ĐT THÀNH PHỐ HỒ CHÍ MINH NĂ...

Nguyen Thanh Tu Collection

Spellings Wk 4 and Wk 5 for Grade 4 at CAPS

Spellings Wk 4 and Wk 5 for Grade 4 at CAPS

Spellings Wk 4 and Wk 5 for Grade 4 at CAPS

NO1 Top Black Magic Specialist In Lahore Black magic In Pakistan Kala Ilam Ex...

NO1 Top Black Magic Specialist In Lahore Black magic In Pakistan Kala Ilam Ex...

NO1 Top Black Magic Specialist In Lahore Black magic In Pakistan Kala Ilam Ex...

Orientation Canvas Course Presentation.pdf

Orientation Canvas Course Presentation.pdf

Orientation Canvas Course Presentation.pdf

Elizabeth Walsh

How to setup Pycharm environment for Odoo 17.pptx

How to setup Pycharm environment for Odoo 17.pptx

How to setup Pycharm environment for Odoo 17.pptx

Personalisation of Education by AI and Big Data - Lourdes Guàrdia

Personalisation of Education by AI and Big Data - Lourdes Guàrdia

Personalisation of Education by AI and Big Data - Lourdes Guàrdia

Observing-Correct-Grammar-in-Making-Definitions.pptx

Observing-Correct-Grammar-in-Making-Definitions.pptx

Observing-Correct-Grammar-in-Making-Definitions.pptx

AdelaideRefugio

PANDITA RAMABAI- Indian political thought GENDER.pptx

PANDITA RAMABAI- Indian political thought GENDER.pptx

PANDITA RAMABAI- Indian political thought GENDER.pptx

akanksha16arora

Play hard learn harder: The Serious Business of Play

Play hard learn harder: The Serious Business of Play

Play hard learn harder: The Serious Business of Play

Pooky Knightsmith

𝐋𝐞𝐬𝐬𝐨𝐧 𝐎𝐮𝐭𝐜𝐨𝐦𝐞𝐬: -Discern accommodations and modifications within inclusive classroom environments, distinguishing between their respective roles and applications. -Through critical analysis of hypothetical scenarios, learners will adeptly select appropriate accommodations and modifications, honing their ability to foster an inclusive learning environment for students with disabilities or unique challenges.

Understanding Accommodations and Modifications

Understanding Accommodations and Modifications

Understanding Accommodations and Modifications

Jamworks pilot and AI at Jisc (20/03/2024)

Jamworks pilot and AI at Jisc (20/03/2024)

Jamworks pilot and AI at Jisc (20/03/2024)

Details on CBSE Compartment Exam.pptx1111

Details on CBSE Compartment Exam.pptx1111

Details on CBSE Compartment Exam.pptx1111

Simple, Complex, and Compound Sentences Exercises.pdf

Simple, Complex, and Compound Sentences Exercises.pdf

Simple, Complex, and Compound Sentences Exercises.pdf

stareducators107

HMCS Vancouver Pre-Deployment Brief - May 2024 (Web Version).pptx

HMCS Vancouver Pre-Deployment Brief - May 2024 (Web Version).pptx

HMCS Vancouver Pre-Deployment Brief - May 2024 (Web Version).pptx

Recently uploaded (20)

UGC NET Paper 1 Unit 7 DATA INTERPRETATION.pdf

UGC NET Paper 1 Unit 7 DATA INTERPRETATION.pdf

UGC NET Paper 1 Unit 7 DATA INTERPRETATION.pdf

TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...

TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...

TỔNG HỢP HƠN 100 ĐỀ THI THỬ TỐT NGHIỆP THPT TOÁN 2024 - TỪ CÁC TRƯỜNG, TRƯỜNG...

Diuretic, Hypoglycemic and Limit test of Heavy metals and Arsenic.-1.pdf

Diuretic, Hypoglycemic and Limit test of Heavy metals and Arsenic.-1.pdf

Diuretic, Hypoglycemic and Limit test of Heavy metals and Arsenic.-1.pdf

Tatlong Kwento ni Lola basyang-1.pdf arts

Tatlong Kwento ni Lola basyang-1.pdf arts

Tatlong Kwento ni Lola basyang-1.pdf arts

AIM of Education-Teachers Training-2024.ppt

AIM of Education-Teachers Training-2024.ppt

AIM of Education-Teachers Training-2024.ppt

OS-operating systems- ch05 (CPU Scheduling) ...

OS-operating systems- ch05 (CPU Scheduling) ...

OS-operating systems- ch05 (CPU Scheduling) ...

80 ĐỀ THI THỬ TUYỂN SINH TIẾNG ANH VÀO 10 SỞ GD – ĐT THÀNH PHỐ HỒ CHÍ MINH NĂ...

80 ĐỀ THI THỬ TUYỂN SINH TIẾNG ANH VÀO 10 SỞ GD – ĐT THÀNH PHỐ HỒ CHÍ MINH NĂ...

80 ĐỀ THI THỬ TUYỂN SINH TIẾNG ANH VÀO 10 SỞ GD – ĐT THÀNH PHỐ HỒ CHÍ MINH NĂ...

Spellings Wk 4 and Wk 5 for Grade 4 at CAPS

Spellings Wk 4 and Wk 5 for Grade 4 at CAPS

Spellings Wk 4 and Wk 5 for Grade 4 at CAPS

NO1 Top Black Magic Specialist In Lahore Black magic In Pakistan Kala Ilam Ex...

NO1 Top Black Magic Specialist In Lahore Black magic In Pakistan Kala Ilam Ex...

NO1 Top Black Magic Specialist In Lahore Black magic In Pakistan Kala Ilam Ex...

Orientation Canvas Course Presentation.pdf

Orientation Canvas Course Presentation.pdf

Orientation Canvas Course Presentation.pdf

How to setup Pycharm environment for Odoo 17.pptx

How to setup Pycharm environment for Odoo 17.pptx

How to setup Pycharm environment for Odoo 17.pptx

Personalisation of Education by AI and Big Data - Lourdes Guàrdia

Personalisation of Education by AI and Big Data - Lourdes Guàrdia

Personalisation of Education by AI and Big Data - Lourdes Guàrdia

Observing-Correct-Grammar-in-Making-Definitions.pptx

Observing-Correct-Grammar-in-Making-Definitions.pptx

Observing-Correct-Grammar-in-Making-Definitions.pptx

PANDITA RAMABAI- Indian political thought GENDER.pptx

PANDITA RAMABAI- Indian political thought GENDER.pptx

PANDITA RAMABAI- Indian political thought GENDER.pptx

Play hard learn harder: The Serious Business of Play

Play hard learn harder: The Serious Business of Play

Play hard learn harder: The Serious Business of Play

Understanding Accommodations and Modifications

Understanding Accommodations and Modifications

Understanding Accommodations and Modifications

Jamworks pilot and AI at Jisc (20/03/2024)

Jamworks pilot and AI at Jisc (20/03/2024)

Jamworks pilot and AI at Jisc (20/03/2024)

Details on CBSE Compartment Exam.pptx1111

Details on CBSE Compartment Exam.pptx1111

Details on CBSE Compartment Exam.pptx1111

Simple, Complex, and Compound Sentences Exercises.pdf

Simple, Complex, and Compound Sentences Exercises.pdf

Simple, Complex, and Compound Sentences Exercises.pdf

HMCS Vancouver Pre-Deployment Brief - May 2024 (Web Version).pptx

HMCS Vancouver Pre-Deployment Brief - May 2024 (Web Version).pptx

HMCS Vancouver Pre-Deployment Brief - May 2024 (Web Version).pptx

serial communication, parallel communication, SPI and ADCs. Write .pdf

1. serial communication, parallel communication, SPI and ADC's. Write a paragraph about serial communication and how ADC's work. Solution Serial Communication: Serial Communication is process of sending data one by one at a time over a communication channel. Parallel communication: Parallel Communication is method of conveying multiple bits at a time over a communication channel. Serial Peripheral Interface: This is used to send data between microcontrollers and small peripherals. It uses clocks and data lines along with a select line to choose the device we wish to talk to. ADC working: ADC takes input signal as analog signal. It uses a circuit which converts this analog signal to appropriate digital signal. You can refer to wikipedia or any other links for the circuit which converts analog signal to digital signal.