Sarmad Azeem Cheema is a Pakistani national seeking a challenging position as a QA/QC painting inspector. He has over 5 years of experience inspecting painting and coatings for oil, gas, and industrial projects in Saudi Arabia and Pakistan. He holds certification in painting inspection from BGAS and has experience using various inspection tools and standards like SSPC, SAES, and ISO. His responsibilities have included reviewing work procedures, inspecting surface preparation and application, ensuring safety and environmental compliance, and maintaining documentation.
Sarmad Azeem Cheema - BGAS Gr 2 Coating Inspector (1)
1. Sarmad Azeem Cheema
Aramco Approved BGAS Certified Painting/Coating Inspector
Nationality : Pakistani
Marital Status : Single
Education : BGAS Painting Inspection Grade 2 TWI UK
Discipline : QA/QC Inspector Painting
Contact Info : +966 59 8270463 Email: sarmad.hse11@gmail.com
Career Objective:
To find a challenging position in a dynamic organization that promotes & rewards self-
motivation, share hard work & bold innovations and where, being productive, I could
apply all of my skills & abilities for the success of my professional field and to achieve
my personal goals.
Technical Skills:
Good knowledge of on-shore painting / coating inspection (Oil & gas /
petrochemical, industrial etc). Good knowledge of international surface
preparation standards, painting / coating application standards, inspection
standards, contracts, specifications, material technical data sheet, material safety
data sheet, documentation…….etc.
Exposure to Inspection Instruments:
• Whirling Hygro meter.
• Substrate temp gauge.
• Hypodermic needle gauge.
• Dial micrometer / Testex tape for profile/Pictorial grading sheet.
• Dry / Wet film gauges.(Banana Gauge and electronic gauges)
1 | P a g e
2. • Adhesion tape for Dust contamination.
• Adhesion V and X cut
• Holiday test.
• Flow cup Test.
• Impact resistance test.
• Penetration Test.
Professional Certifications:
BGAS CSWIP – Grade-2 (TWI-UK) 2013
Experience Summary
Imad CO for trading and contracting @ BI 10-01252, Co-generation
interconnection facilities at Abqaiq Gas plants, Abqaiq City, Damaam
Employer: Saudi Aramco
(29 Aug 2015 to date)
EL-SEIF ENGENEERING CONTRACTING CO. @ HARMAIN HIGH SPEED RAIL
PROJECT. KING ABDULLAH ECONOMIC CITY. as QC Painting Inspector
Employer: Saudi Railways Organization
(20 may 2014 to 16 july 2015)
2 | P a g e
3. DESCON ENGINEERING LIMITED @ DEW Workshop Lahore as QA/QC Painting
Inspector
(10-12-2013 to April 2014)
QA/QC Painting Inspector at Izhar Steel (Pvt) Ltd 05-11-2011
to 10-11-2013
Responsibilities Includes:
• Review and commend and approve Work Procedures and Method
Statements of sub-contractor for Coating Material Receiving and
storage, Surface Preparation, Coating Application and Final
Inspection prior to submmiting to Client for final approval.
• Perform field inspection as per project specification, international
standards, Saudi Aramco Engineering Standards i.e SAES-H-001,
002, 003, 004, 100. 101, 102, 200. 201 & 204.
• Pre-Qualification Inspection and assessment of Contractors, Sub-
Contractors and Third Party Company Facilities, Shops and /or
Laboratories.
• Review and Verification of Crew Supervisor, Abrasive Blasters and
Coating Applicators Qualification Certificates as per Saudi Aramco
Applicable SAEP316. And arrange Qualification Test for new Crew
Supervisors, Abrasive Blasters and Coating Applicators.
• Pre-Blast surface checking for assessment of salt contamination, weld
quality, material defects, corrosion levels etc and advice for pressure
water washing if required.
• Tests for abrasive quality and select appropriate abrasive material for
particular jobs to achieve the required surface profile and cleanliness
and verification of abrasives chemical analysis reports.
• Visual inspection of abrasive blasting and coating application
Equipments, Air compressor/Abrasive blasting machine, all hoses,
accessories and Air less coating application machine, check sizes &
condition and verify all calibration certificates.
• Receiving Inspection of coating material and storage of coating
material, ensure that as per the manufacturer instructions and
3 | P a g e
4. recommendations and monitoring the storage temperature for coating
material.
• Be aware of Material Safety Data Sheet (MSDS), Hazardous
Ingredients, Product Applications, Physical Properties, Health Hazard
Information, Storage, Handling, Preventive Measures, Emergency
and First Aid Procedures.
• Monitoring of Environmental conditions, ambient temperature,
Substrate temperature, Dew point and Relative Humidity before
starting abrasive blasting and coating application.
• Inspection of blasted Surface for visual cleanliness and profile
(Replica tape and comparator methods–ISO 8501-1), Dust
contamination visual inspection as per ISO-8502-3 and determining
Swedish Standard Sa-1,Sa 2,Sa 2-1/2 and Sa3 for manual and wheel
abrator machine blasting.
• Report directly to the quality control Manager for all sites Quality
Assurance and Quality Control activities.
• Monitoring all inspection, testing and measuring equipments and
reviewed calibration certificates and expiry date.
• Monitoring Specified paint quality, application methods as per
manufacturer recommendation, ensuring correct mixing proportions,
mixing time, recoat intervals and curing periods as per temperature
and required thickness by using wet film thickness and dry film
thickness gauges.
• Performing all inspection as per International Quality Standards like
BGAS,,SSPC & Saudi Aramco specifications and project drawings
and specifications.
• Ensuring that adequate precautions are taken to protect the works
from weather and other hazards during application of paint and
coating.
• Perform Quality Control and over sight of construction work and
activities, and monitor contractor inspections and testing as per
requirements of approved Inspection and Test Plans (ITPs), project
Specifications and Drawings.
• Coordinate blasting and painting work and ensure compliance with
Project’s specification and international industrial standards.
• Monitoring and verifying blasting and painting quality issues i.e.
measuring weather conditions, surface profile, paint thickness, holiday
detection test…etc to ensure compliance with relevant Project’s
specification.
• Ensure all surface preparation and application is conducted in
accordance with the specified standard for that painting system
according to procedures/specifications.
4 | P a g e
5. • Maintain a Daily logbook & Inspection Log reporting on a weekly
basis.
• Prepare and monitor punch list items, ensuring they are being
resolved prior to sail away.
• Execution, Inspection and Supervision of Painting Jobs as
per the requirement of Project Specifications.
• Quality assurance of Coating and application activities.
Provide Coating and application expertise to achieve
project completion safely (HSE), efficiently and to
specified quality requirements to agreed budgets and
timelines.
Academic Qualification:
BGAS-CSWIP Painting Inspection Grade 2 TWI, UK
Associate Engineer in Leather/Chemical Technology
Punjab Board of Technical Education Lahore, Pakistan
MATRIC(BISE Gujranwala)
5 | P a g e
6. .
PERSONAL INFORMATION
Father’s Name : Muhammad Azeem
N I C NO : 34104-6545590-1
Marital Status : Single
Languages : English, Urdu
Religion : Islam
Passport NO : DA1855901
Iqama : Transferable
Skills & Strengths
Good Communication Skills
Good Interpersonal Skills
Strong Work Ethics
Able To Work In Team Environment
Can Measurement The Profile With Active Use Of Gauges
MS OFFICE
6 | P a g e
7. .
PERSONAL INFORMATION
Father’s Name : Muhammad Azeem
N I C NO : 34104-6545590-1
Marital Status : Single
Languages : English, Urdu
Religion : Islam
Passport NO : DA1855901
Iqama : Transferable
Skills & Strengths
Good Communication Skills
Good Interpersonal Skills
Strong Work Ethics
Able To Work In Team Environment
Can Measurement The Profile With Active Use Of Gauges
MS OFFICE
6 | P a g e