1. A D PATEL INSTITUTE OF TECHNOLOGY (ADIT)- KARAMSAD
TITLE OF PROJECT : E-CYCLE GARBAGE COLLECTOR
Team members : (1) AKASH PATEL (170010109014)
(2)VRAJESH PATEL (170010109017)
(3) DHYAN SHAH (170010109020)
Mentor : PROF. DHAVALTAILOR
Electrical
Engineering
2. ABSTRACT
• For Cleaning, first we think about our traditional way means with the
use of brush and brooms And other thing we have to use some
mechanical tools or machine which is work on the principal of engine,
And we also have electrical machine, but there are some limitations
in all field like fuel consumption, suction problems, Economical rate,
Eco-friendly, Speedy etc.
• Therefore, we have to find an alternative to save both man power and
fuels And we also use as this product as transportation vehicle.
• This directly decreases the cost of cleaning an area at a time.
2
3. INTRODUCTION TO OUR PRODUCT
• Our product is Used for transportation
and garbage collection.
• Mainly our project divided in two parts
first is E-cycle which is use of
transportation and second part is
garbage collector which is use for
cleaning.
• Our Product is powered by 4 batteries
which operate DC hub motor, Suction
motor and controllers
3
Design in Solid Works
6. • This is the hub motor which we
have used on the front wheel to
drive this bicycle
• This is the Hub motor controller,
with the use of this we can
controlled the speed of cycle and
also connect the sensors or display
to show the speed of cycle it
means it is a heart of cycle.
• Finally we painted the cycle to
make it more attractive.
11. TECHNICAL SPECIFICATIONS
11
Battery • Lead Acid ---12v 32Ah*4
Motor1
Power consumption
RPM(max)
No load Current
Rated Current
Efficiency
• Hub motor; DC geared motor
• 250W
• 400
• 2.2 Amps
• 13.4 Amps
• 78%
Motor2
Power consumption
Maximum Thrust
Maximum Voltage Capacity
RPM(max)
• Suction Motor; Universal Motor
• 650 w
• 1400 gm
• 48VDC
• 3000
Controller 1 • 48V-350W Hub motor controller
12. TECHNICAL SPECIFICATIONS
12
Controller 2: • ARDUINO UNO
Sweeper Brush: • Diameter/length : 200 mm / 1000 mm
• Material: Nylon, PP
• Bristle Stiffness: Semi - Hard
• Shape: Cylindrical
Fan: • Diameter: 30 cm
• Material: Unplasticized Polyvinyl
Chloride
Ultrasonic Sensors
LCD display
Volt meter
• HC-SR04
• 16*2 type Display
• 0V-100V 3 Wire Module
13. 13
Total load = Hub motor
load
+ suction motor
load
= 250 Watt + 650 Watt
= 900 Watt
• Hub motor rated voltage supply input=48v
& suction motor v. rating supply=48v
So, we have to battery voltage is 48v
Current rating
For 1 hr. of usage
=
𝟗𝟎𝟎
𝟒𝟖
= 18.75Ah
• In market we have 12volt, 24volt battery
• So, if we take 12v than we need 4 battery
and if we take 24v battery than we need 2 battery.
Here we take 12v battery and the current capacity of battery is
32Ah so we can run this cycle for 1.5 hour with single charge
SELECTION OF BATTERY
14. 14
• Chamber is portable
• Smart analyzer
• Variable speed control
• Multi purpose use
LCD display
Garbage Storage level indicator
FEATURES OF OUR PRODUCT
Maximum speed of hub motor 30km/h Battery Level Indicator
15. What we done
• We completely design tri cycle with the help of Hub motor and iron
structure.
• We made 3d model or prototype of sweeping, suction, filtering and
collection chamber of garbage.
• Totally electric machine which can be used for garbage collection
and Transportation.
• And give best Product which is eco-friendly, Economical and speedy
for cleaning.