1. AMIT BISWAS
ID : 143003014
Department of Textile Engineering
Green University of Bangladesh
2.
3. • Sugarcane is a natural plant fibre, which is collect
from the sugarcane plant.
• Mainly sugarcane fiber is called the “bagasse “
4. Bagasse is the fibrous material that remains
after sugarcane are crushed to exact their
juice from sugarcane. It is dry pulp residue
left after the extraction of juice from
sugarcane
5. • Crystallinity : between 63 % - 68%
• Fibre fineness : according to maturity level.
• Moisture absorption : no chance 13% - 18% (no chance )
• Elastic recovery : 50 % - 60%
• Torsional rigidity : varies between maturity lavel
• Flexural rigidity : 0.015 g/𝑐𝑚2 to 0.032 g/𝑐𝑚2
8. Fracture surface of unirradiated cement fibre composite with (a) 0% (b) 6% and
(c) irradiated cement composite with 6% of SBR content.
9. Results were also analyzed by varying density of sugarcane
fibre with different compositions.
RBF-Raw Bagasse Fibre (low density)PRF-Pure Rind Fibre(High
Density) EBF-Alkali extracted Bagasse Fibre(Higher Density)
Tensile Strength
Impact Strength
10. At first juice are extract from the sugarcane
After extraction of juice the bagasse are
collected for extraction of fibre
The soft core part pith is removed from the
bagasse manually to get outer hard ring
The samples are then taken into hot
water treatment
The samples are then dried in the
sunlight
Then these samples are in the
chemical treatment
After chemicals treatment the fibres are
separated
14. Bangladesh in sugarcane producing is
self sufficient
Rangpur,Rajshshi,Mymensingh
,Khulna, jessore, kushtia,faridpur is the
major sugarcane producing area